Articulated 4-Wheel Drive 24-in. Load Center Forklift
|
|
- Gervais Skinner
- 6 years ago
- Views:
Transcription
1 Taylor machine works, inc. Articulated 4-Wheel Drive 24-in. Load Center Forklift TX4-300* TX4 Articulated Forklift Models and Capacities TX4-250 (25,000-lb. Cap. at 24 L.C., 132" WB) TX4-300 (30,000-lb. Cap. at 24" L.C., 132" WB) TX4-360 (36,000-lb. Cap. at 24" L.C., 132" WB) ENGINEERING DONE RIGHT THROUGH *Featured truck is shown with available options.
2 Taylor Machine Works was built on the premise, "We engineer and build what you need." This is just as true today as it was in We design, engineer, and manufacture equipment tailored specifically to meet the material handling needs of your business. Unlike other comparable articulated machines, this is not a front loader chassis with a fork attachment, but an articulated material handler completely designed and engineered by Taylor Machine Works. With a wide array of attachments available, the TX4 can become the material handler you've been looking for to meet your needs. Telescopic 11-ft ULTRA-VU mast Optional mast choices available Choose from different configurations to best fit your material handling needs Forward alarm standard TX4 series mast tilting 16 forward and 16 backward Mast mounted forward facing work lights standard Nested channel construction Nested leaf chains Heavy-duty carriage Minimal maintenance and more resistant to dynamic/shock loads with rough terrain, high lift, and/or offset loads. optional sideshift shown Pin mounted full width adjustable forks optional fork positioning shown
3 24-in. Load Center Machines The TX Series features the most dependable and diverse assortment of mast and carriages in its class. Known for their innovative design, these masts give you the confidence in knowing it will work every time you need it. Even when maintenance is required you can feel safe knowing our engineers have designed our mast and carriages to be as easy to maintain and repair as possible. The telescopic, ULTRA-VU mast features a nested channel construction. The double-acting lift cylinders are positioned to the rear of the mast rails while the multi-leaf lift chains are nested inside the mast rails. The two heavy-duty tilt cylinders have adjustable rod ends and greaseable self-aligning spherical bearings. Two lifting eyes and bolt-on caps permit safe, easy removal of the mast in the event that repair is needed. Carriage Groups 84-in C-type carriage standard (options available depending on your needs) Simple design- bolt-on housing Timken tapered roller bearings cast nylon side thrust pads shims, if necessary Minimal maintenance with more resistant to dynamic/shock loads with rough terrain, high lift, and/or offset loads The pin-mounted forks are hammer forged from heat treated steel with increased thickness in critical heel sections. The forks are fully adjustable from full width of carriage to +/-2-in. Lengths and widths vary depending on your particular needs and model type. The mast and carriage main rollers are common and use Timken tapered roller bearings. Chain rollers use sealed ball bearings. Common, cast nylon, side thrust pads are adjustable to compensate for wear. The TX4 maintains its rated capacity even at the full steer position. The TX4 Articulated Series of lift trucks can boast 3 models to choose from, with lift capacities ranging from 25,000-lbs to 36,000-lbs all at 24-in L.C. and 132-in wheelbase. Lift with Confidence
4 The TX4 Series of articulated 4-wheel drive forklifts were specifically designed for one task... moving material in the harshest environments imaginable. No matter if it s snow, mud, or rough terrain - the TX4 delivers unparalleled performance. Designed for optimum performance and dependability, Taylor Machine Works has made sure the very best materials and engineering went into this machine. The most reliable components available are brought together to make a truly unique lift truck. Dual element air cleaner with restriction indicator Vertical shielded exhaust Forward tilting cab for extra access to internal components Sliding engine hood swing away doors on both sides for added access to the engine, filters and dipsticks Hydraulic tank heavy gauge steel wall serviceable filter element tank mounted breather internal suction screen 55-gallon capacity Full flow, in-tank, 10-Micron return filtration Pivoting front and rear frames for maximum control and Maneuverability Pivoting chassis allows for easy access to internal components Easy, under cab, access to the junction box and to reset circuit breakers Sealed electrical connectors All wiring is color coded and number coded
5 24-in. Load Center Machines Engine mounted sealed fan shroud insures maximum air flow Fuel tank heavy gauge steel wall lockable fuel cap integral strainer 50-gallon capacity Fuel sensor has no moving parts High performance pusher fan 130 amp alternator 12V electrical system Transmission output shaft disc mounted, parking brake Spring on Hydraulic off Instrument panel mounted control ENGINE Tier Certified Cummins electronic, low emissions (see specification sheet for engine detail) Rated at 165 HP at 2000 rpm for heavy industrial applications (Only on the TX4-250 and TX4-300) (Rated capacity for the TX4-360 is 190 HP at 2200 rpm) Electronic diagnostics on engine with fault code history for easy diagnostics and repair Built-in emergency shut-down system for engine and transmission All service and daily checks can be made easily from the running boards High capacity charge air engine coolant, transmission oil and hydraulic oil cooling system Easily serviceable bolted 3-section cooling system Remote mounted grease points 4-Wheel Drive Power Large, heavy-duty, all-terrain tires for the harshest working environments TRANSMISSION Heavy-duty 4-speed Powershift transmission High capacity 12-plate clutch system for added durability Operator controlled hydraulic inching for precise vehicle position control Automatic Powershift Control (APC) Full directional modulation for soft directional changes Transmission oil cooler is part of the bolted 3-section cooling system Cooler has wide fin spacing to resist plugging Remote mounted filter to reduce oil spills Flex-plate drive Full width transmission mount goes from rail to rail in chassis for a more stable drivetrain Heavy-duty bolted planetary drive axle Internal force-cooled wet disc brakes Hydraulic actuated service brakes Brake saver system does not allow operator to drive through parking brakes Frame bar can be placed between the articulated sections for transportation or servicing. NOTE: Please refer to manual for proper maintenance procedures before using. Reliable Performance
6 Two brake pedals left brakes and inching right brakes only Spacious uncluttered cab with tilt steering, hinge-down dash, climate controls and adjustable seating Premium vinyl or cloth seat that rotates 15 left and 20 right Comfortable adjustable arm rest with fingertip joystick control for smooth precise handling The TX4 Series features a spacious, all steel cab with increased leg and head room, sound deadening rubber mat flooring, tilt steering wheel, simple T-shaped dash with hinge down instrument panel, fingertip electric joystick controls, and optional climate control system for operator comfort and convenience. The tilt steering column and the adjustable full-suspension air-ride seat places your operator in the utmost comfort. The right-side armrest s adjustment capabilities allows even the most demanding operator to place the truck s controls within easy reach. The fingertip controls, on the the low effort joystick, allow the operator to control the mast and carriage with ease and comfort. The floorboards are light weight and easily removed. This blend of ergonomics and technology will help your operator be more efficient with the job at hand... handling materials. Easy to understand diagnostic display. TICS (Taylor Integrated Control System) using CANbus technology is standard on the TX Series. Dual panoramic interior rear view mirrors standard Dual external side view mirrors standard Optional pedestrian camera and monitor Faith Vision Work Comfort & Safety
7 24-in. Load Center Machines Forward activated alarm Exceptional visibility Unobstructed rear view The air snorkel and and shielded exhaust are mounted on the corners of the cab to keep the view open. Forward facing work lights optional Overhead rear work lights for improved safety and visibility Key-switch actuated amber strobe light Reverse activated alarm Optional air conditioning with clean air intake on right side of cab TaylorMax filter Option shown Safety rails around platform area on both sides of truck Extra large, shock absorbing, center mounted cab for operator comfort and noise reduction Tinted glass throughout the cab Self cleaning, anti-slip, steps 3-point mounting and dismounting The TX4 is where function meets form... this is a true articulated forklift. Designed to do what others cannot, TX4 can and will get the job done. Quality Assured and
8 The Best Support In The World! No-one can match our record for service and reliability. Worldwide customer service, backed by over 83 years of Taylor customer satisfaction and trust. Sudden Service, Inc. 649 N. Church Ave. Louisville, MS Phone (662) Fax (662) suddenserviceinc.com you can depend on is a personal and collective commitment from the Taylor "Big Red" Team to every customer. Customer needs and expectations are the main priorities for Taylor engineering, manufacturing, marketing, and service organizations. Sudden Service, Inc. and our worldwide Taylor dealer network are ready to respond to your requests for support twenty-four hours a day, seven days a week! Genuine Parts Unbeatable Service Trusted Support Taylor Machine Works, Inc. 650 North Church Avenue Louisville, Mississippi Phone (662) Fax (662) taylorbigred.com TMW-BR /21/10
9 Big Red TX4-360 Four Wheel Drive Articulated Fork Lift Taylor Industrial Trucks Preliminary Specifications TX4-360 Rated Capacity 36,000-lbs. (16,330 kg) 24-in. (610 mm) Load Center 132-in. (3,353 mm) Wheelbase
10 Big Red TX4-360 Four Wheel Drive Articulated Fork Lift 1 Manufacturer Manufacturer s Name Taylor 2 Model Manufacturer s Designation TX4-360 G English Metric E N 3 Capacity Rated Capacity lb (kg) 36,000 16,330 E 4 Load Center Distance in (mm) R A 5 Power Type Gas, LPG, Or Diesel Diesel L 6 Tire Type Cushion, Pneumatic Front / Rear Pneumatic / Pneumatic 7 Wheels Number (X = Driven) Front / Rear 2X / 2X 8 Upright Lift Standard Lift (Top Of Fork) in (mm) ,051 9 Thickness in (mm) A Forks Width in (mm) B Length in (mm) 48 1, Tilt Angle D Standard Upright - Forward / Backward deg._ 16 / 16 I 11 Length To Face Of Forks in (mm) 235 5,969 M 12 Width (Standard Tires) in (mm) ,908 E N 12A Width(DriveAxle) in(mm) 108 2,743 Overall S 13 Height, Standard Upright Lowered in (mm) 147 3,734 I 14 Dimensions Height, Standard Upright Extended in (mm) 213 5,410 O N 15 Height To Top Of Hood in (mm) 92 2,337 S 16 Height To Top Of Cab / Guard in (mm) 140 3, Minimum Outside in (mm) 240 6,096 17A Turning Radius Minimum Inside in (mm) 124 3, Load Distance Center Of Wheel To Face Of Forks in (mm) , Aisle Width (Add Load Length For 90 Stacking) in (mm) 288 7, P 21 Travel Speed - Maximum Forward mph (km/h) E 22 Lift Speed - No Load fpm (m/s) R 22A Speeds Lift Speed - With Load fpm (m/s) F 23 Lowering Speed - No Load / With Load fpm (m/s) 70 / / Drawbar Pull Powershift (Maximum At Stall) lb (kn) 32, { 25 Powershift (Maximum At Stall) No Load % 39% 25A Gradeability Powershift (Maximum At Stall) With Load % 32% 26 Ttl. Apprx. Wt. Standard Truck lb (kg) 53,000 24, Static With Rated Load - Front lb (kg) 76,600 34,746 W 27A Static With Rated Load - Rear lb (kg) 12,400 5,625 T Axle Loading 27B Static With No Load - Front lb (kg) 22,000 9,979 27C Static With No Load - Rear lb (kg) 31,000 14, Number - Front / Rear 2/2 W 29 Tires Size - Front 23.5 x PR H 30 Size - Rear 23.5 x PR L S 31 Wheelbase Distance in (mm) 132 3,353 / 32 Center Of Tires - Front in (mm) ,292 T 32A Tread Center Of Tires - Rear in (mm) ,292 I R 33 Ground No Load At Lowest Point in (mm) E 34 Clearance No Load At Center Of Wheelbase in (mm) S 35 Service / Parking - Method Of Control Foot / Hand Brakes 36 Service / Parking - Method Of Operation Hyd / Spring P 37 Battery Volts / Ampere Hours (1 Battery) V/Ah 12 / 1000 W 38 Make / Model Cummins QSB6.7-C190 Tier III R 39 Internal Output - Intermittent Per SAE Standards hp (kw) Combustion U 40 Governed Speed - With Load rpm 2,200 Engine N 41 Cycle / Number Of Cylinders / Displacement cu-in (L) 4/ 6/ 408 4/ 6/ 6.7 I 42 Clutch Type Inching T / 43 Gear Change Type Hand X Number Of Speeds - Forward / Reverse 4/4 M Transmission S 45 Type Powershift N 46 Relief Press. For Attachments psi (bar) 2,000 13, Width Across Rear Fenders in (mm) 113 2, Standard Fork Spread in (mm) 100 2, Ground To Top Of Carriage in (mm) 65 1, Load Moment in-lbs (kg-m)2 2,416,500 27,113 NOTE:Performance specifications are for trucks equipped as described on the back page of this specification sheet. Performance specifications are affected by the condition of the vehicle, its components, and the nature and condition of the operating area. If these specifications are critical, the proposed application should be discussed with your Taylor sales representative.
11 Big Red TX4-360 Four Wheel Drive Articulated Fork Lift Mast Dimensions (inches / millimeters) Optional Lift Height (8)* OAHL (13) OAHR (14) 2-Stage ULTRA-VU English Metric English Metric English Metric Telescopic Mast , , ,410 *Includes Fork Thickness , , , , , , , , ,544 Engine 12A A 32A 47 Cummins QSB6.7--C190 Tier III TPEM electronic turbocharged, charge air aftercooled (air to air) diesel, 6--cylinder diesel engine has 409 cu--in. (6.7 L) displacement in. (104 mm) bore x 5.2--in. (132 mm) stroke. Rated power of 190 (142 kw) horsepower at 2200 RPM. Maximum power of 195 horsepower (145 kw) at 2000 rpm. Peak torque 540 ft--lbs. (732 N--m) at 1400 rpm. (SAE J1995 Conditions). Standard features are electronic diagnostic and maintenance monitor, fuel/water separator and engine/transmission protection systems, fuel economy, and reduced emissions. Emission certification: US EPA Tier III, Carb Tier III, EU Stage III. The electrcal system is 12 volt with a 130 amp alternator. Fuel tank capacity is 50 gallons (189 L) ,
12 Big Red TX4-360 Four Wheel Drive Articulated Fork Lift Air Cleaner The dry type air cleaner has a safety element, restriction indicator, and vertical air intake extension. Cooling System The conventional top / bottom tank radiator has wide fin spacing to reduce dirt build-up and provide optimum engine cooling. Cooling includes engine charge air cooler, engine coolant air cooler, transmission oil air cooler, and a separate wet disc and hydraulic oil air cooler. Each can be serviced seperately. Electrical, Instrumentation, and Accessories The one-piece instrument panel is pre-wired to accommodate heavy-duty accessories. All wiring is color and number coded. The unit has a 12-volt electrical system with circuit breakers. Standard equipment includes a key-type anti-restart ignition switch system, 130-amp alternator, heavy-duty battery, electric fuel gauge, lighted display, electric horn, keyswitch-actuated amber strobe light, forward alarm, a reverse-actuated warning horn and 4 worklights (2 front and 2 rear). Display indicates functions for seat belt, fuel level, engine oil pressure, parking brake, battery indicator, and Tier III engine electronic diagnostic light package. The unit has tilt steering and rear view mirrors. All machine controls are integrated using solid state controllers and J1939 CAN bus technology. This allows controllers and sensors to communicate with minimal wiring between the components. I/O modules are used to eliminate electromechanical relay devices and add reliability to the machine control system. J1939 CAN bus technology allows all machine data to be accessed through the main color display located in the cab. This display shows engine data along with warnings, and man/ machine interface data. The display allows service personnel to access data needed during troubleshooting (such as sensor status and controller outputs). Machine functions can be tuned through the main display in the cab. Tuning functions are password protected to prevent operator access. Transmission The four-speed, fully reversing, modulated powershift transmission has inching, electric roll shift control, and a separate air-to-oil cooler. The filler pipe dipstick and large, heavy-duty oil filter are easily accessible. Automatic powershift (standard). Front and Rear Drive Axles The bolted heavy-duty planetary drive axle utilizes a hypoid ring gear and pinion. Positive rim mountings. Brake System The internal force--cooled, hydraulic--actuated, wet disc, service brakes (and the hydraulic oil) are cooled by an air--to--oil cooler separate from the transmission cooler. The left pedal combines actuation of service brakes and transmission inching; the right pedal actuates the service brakes only. The parking brake control is mounted on the instrument panel. Power Steering The hydrostatic, steer-on-demand steering system provides constant response at all engine speeds. Chassis The cab is mounted on an all-welded tubular sub-platform that can be tilted forward for service access to the transmission. The hood slides on rollers. The cab is 2-door and includes one 32,000 BTU heater, one circulation fan, front and rear windshield wipers, dome light, all glass tinted, door hold back latches with trip handles, grey insulation, and black floor mat inside cab. Cab color black only. The adjustable, black vinyl covered air suspension seat with arm rest and orange seat belt is standard. The seat has 15 rotation to the left and 20 to the right. Hydraulic System The high-capacity hydraulic tank has a spin-on tank breather, wire-mesh strainers, and full-flow 10-micron return-line filters, with a replaceable element in the tank. The hydraulic system utilizes a gear-type pump and sectional control valves. A tilt-lock valve reduces mast drift and torsional stress. The lift cylinders have self-adjusting packing. The standard joystick control lever is armrest mounted with multiple adjustments for operator comfort. Mast, Carriage, and Rollers The 13-ft. (4.0 m) ULTRA-VU telescopic, nested-channel mast, with two multiple-leaf lift chains, is constructed of high-strength steel. The double-acting lift cylinders are nested to the rear of the mast rails. Two lifting eyes and bolt-on caps permit safe, easy removal. The lift chains are nested in the mast rails and are hidden. Pin-type 100-in. (2,540 mm) wide C carriage with side shift and fork positioners. The mast and carriage main rollers are common and use shielded roller bearings. Chain rollers use sealed ball bearings. Side bearings are adjustable to compensate for wear. Forks The forks are pin-mounted and fully adjust from the outer carriage plates to the center brace. They are forged from heat treated steel and have square tips and bottom tapers. Sizes: Models Thickness Width Length TX in. (89 mm) 8-in. (203 mm) 48-in. (1,219 mm) * Steer ground drive pump option available. This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part , and the applicable design and performance requirements in ANSI B56.6 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the operating area. If these specifications are critical, contact the factory. Note: Illustrations of equipment may sometimes show optional equipment not included on a standard model. Taylor Machine Works, Inc. 650 North Church Avenue Louisville, Mississippi Phone (662) Fax (662) X4-2 (6/13) Printed in U.S.A.
Articulated 4-Wheel Drive 24-in. Load Center Forklift
Taylor machine works, inc. Articulated 4-Wheel Drive 24-in. Load Center Forklift TX4-300* TX4 Articulated Forklift Models and Capacities TX4-250 (25,000-lb. Cap. at 24 L.C., 132" WB) TX4-300 (30,000-lb.
More information48-in. Load Center Machines
48-in. Load Center Machines Taylor machine works, inc. TX-520M* TX Series Models and Capacities TX-520M (52,000-lb. Cap. at 48" L.C., 170" WB) TX-550M (55,000-lb. Cap. at 48" L.C., 170" WB) TX-650L (65,000-lb.
More information36 & 48-in. Load Center Machines
36 & 48-in. Load Center Machines Taylor machine works, inc. TX-520M* TX-400M TX-450M TX-450S TX-520S TX-550S TX Series Models and Capacities (40,000-lb. Cap. at 36" L.C., 156" WB) TX-650S (65,000-lb. Cap.
More information36 & 48-in. Load Center Machines
36 & 48-in. Load Center Machines Taylor machine works, inc. TX-520M* TXi-400M TXi-450M TXi-450S TXi-520S TXi-550S All models listed above are available in TX Series with Tier 3 Certified diesel engines.
More information24-in. Load Center Machines
24-in. Load Center Machines Taylor machine works, inc. TX-360M* TX Series Models and Capacities TX-280S (28,000-lb. Cap. at 24" L.C., 110" WB) TX-160 (16,000-lb. Cap. at 24" L.C., 97" WB) TX-280M (28,000-lb.
More informationRigger Truck. 36-in. Load Center Machine TX-4030* TX-4030 Capacities
Taylor machine works, inc. Rigger Truck 36-in. Load Center Machine TX-4030* TX-4030 Capacities TX-4030 (36,000-lb. Cap. at 36" L.C., 132" WB) Rigger Application: TX-4030 (40,000-lb. Cap. at 36" L.C., 132"
More informationTXB-250M. The master parts depot ships genuine TAYLOR parts nationwide and is a key component in the Sudden Service, Inc. dealer network.
PRODUCT LINE WHEELBASE & CAPACITIES TXB-180S (18,000-lb. Cap. at 24" L.C., 110" WB) TXB-200S (20,000-lb. Cap. at 24" L.C., 110" WB) TXB-250M (25,000-lb. Cap. at 24" L.C., 121" WB) TXB-300L (30,000-lb.
More informationPRODUCT LINE WHEELBASE & CAPACITIES
PRODUCT LINE WHEELBASE & CAPACITIES TX-4030 (30,000-lb. Cap. at 36" L.C., 132" WB) Rigger Application: 40,000-lbs. Cap. at 36 L.C. if traveling less than 1 mph up to 48-in. lift. Truck is shown with available
More informationTXB-250M PRODUCT LINE WHEELBASE & CAPACITIES. (30,000-lb. Cap. at 24" L.C., 140" WB)
PRODUCT LINE WHEELBASE & CAPACITIES TXB-180S TXB-200S TXB-250M TXB-300L (18,000-lb. Cap. at 24" L.C., 110" WB) (20,000-lb. Cap. at 24" L.C., 110" WB) (25,000-lb. Cap. at 24" L.C., 121" WB) (30,000-lb.
More informationTaylor Big Red THC Series Cushion Tire Lift Trucks
Taylor Big Red THC Series Cushion Tire Lift Trucks THC-300S THC-400L Features: Hydrostat Transmission and LP Engine options are available on some models Cummins Turbocharged diesel engines are standard
More information6-HIGH 9FT.-6IN. CONTAINERS LOADED CONTAINER HANDLER PRODUCT LINE WHEELBASE & CAPACITIES. TXC in. (5,994 mm) Wheelbase
Truck is shown with available options. Many options are available on TXC-976. PRODUCT LINE WHEELBASE & CAPACITIES TXC-976 236-in. (5,994 mm) Wheelbase Rated At 97-in. (2,464 mm) Center Of Load 80,000-lbs.
More informationEmpty Container. Handlers. TEC-150H thru TECTS-198/9. With a Taylor Empty Container Handler... the Sky is the Limit. Truck shown is a TEC-155H
Empty Container Handlers TEC-150H thru TECTS-198/9 With a Taylor Empty Container Handler... the Sky is the Limit. Truck shown is a TEC-155H Taylor Machine Works has designed, built, and marketed empty-container
More informationXH-360L INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET. Rated Capacity 36,000-lbs. (16,330 kg) Load Center 48-in. (1,219 mm) Wheelbase 148-in.
INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET XH-360L Rated Capacity 36,000-lbs. (16,330 kg) Load Center 48-in. (1,219 mm) Wheelbase 148-in. (3,759 mm) Featured truck is shown with optional equipment www.taylorbigred.com
More informationRated Container Capacity 99,000-lbs. (45 t) First Row / 4-high Stacking 9.5-ft. (2.9 m) Rated Container Capacity 90,400-lbs. (41 t) First Row /
Rated Container Capacity 99,000-lbs. (45 t) First Row / 4-high Stacking 9.5-ft. (2.9 m) Rated Container Capacity 90,400-lbs. (41 t) First Row / 5-high Stacking 9.5-ft. (2.9 m) 256-in. (6,500 mm) Wheelbase
More informationX-360M INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET. Rated Capacity 36,000-lbs. (16,330 kg) Load Center 24-in. (610 mm) Wheelbase 121-In.
INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET X-360M Rated Capacity 36,000-lbs. (16,330 kg) Load Center 24-in. (610 mm) Wheelbase 121-In. (3,073 mm) Featured truck is shown with optional equipment www.taylorbigred.com
More informationX-450S X-520S X-550S INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET
INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET X-450S X-520S X-550S Featured truck is shown with optional equipment X-450S Rated Capacity 45,000-lbs. (20,412 kg) X-520S Rated Capacity 52,000-lbs. (23,587 kg)
More informationH HDS SERIES TECHNICAL GUIDE
H400-450HDS SERIES TECHNICAL GUIDE WWW.HYSTER.COM H400-450HDS DIMENSIONS 4-21 4-35 4-1 4-1 4-5 4-4 4-2 4-7 4-31 4-32 1-8 1-9 4-19 4-20 Circled dimensions correspond to the line numbers on the tabulated
More informationH HDS SERIES TECHNICAL GUIDE
H550-700HDS SERIES TECHNICAL GUIDE WWW.HYSTER.COM H550-700HDS DIMENSIONS 4-21 4-35 4-1 4-1 4-5 4-4 1-6 4-7 4-2 1-5 1-5 4-31 1-8 4-19 4-32 4-20 1-9 Circled dimensions correspond to the line numbers on the
More informationTechnical Guide. Heavy-Duty Forklift Truck
Technical Guide Heavy-Duty Forklift Truck H300-360HD 2 DIMENSIONS 4-21 Equal intersecting right angle aisle with 76" (1930 mm) wide x 72" (1829 mm) long load: H300HD 2 155 (3936) H330HD 2 155 (3936) H360HD
More informationHIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC 22000 72000 LBS. REACH NEW S SPECIFICATIONS THD2200-7200 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC PNEUMATIC CAPACITY 22000 72000
More informationTechnical Guide. Heavy-Duty Forklift Truck
Technical Guide Heavy-Duty Forklift Truck H190-280HD 2 DIMENSIONS 4-21 Equal intersecting right angle aisle with 48" (1219 mm) forks and 67" (1702 mm) wide x 72" (1829 mm) long load: H190HD 2 140 (3545)
More informationH HD/S SERIES TECHNICAL GUIDE
H800-1050HD/S SERIES TECHNICAL GUIDE WWW.HYSTER.COM H800-1050HD/S DIMENSIONS 4-24 4-21 4-25b 4-25a 4-35 4-1 4-1 H800-1050HD/S MAST DIMENSIONS 4.4 Lift Height (Top of Fork) 4.2 Mast Lowered Height* 2 Stage
More informationHIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC 22000 72000 LBS. REACH NEW S SPECIFICATIONS THD 2200 7200 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC PNEUMATIC CAPACITY 22000 72000
More informationTechnical Guide. Heavy Duty Forklift Truck
Technical Guide Heavy Duty Forklift Truck H360-36/48HD DIMENSIONS 4-21 4-35 4-1 4-1 4-5 4-4 4-7 4-2 1-6 1-5 4-32 4-31 1-8 4-19 4-20 1-9 2 H360-36/48HD SPECIFICATIONS PERFORMANCE MISC. DIMENSIONS WHEELS
More informationTechnical Guide. Heavy Duty Forklift Truck
Technical Guide Heavy Duty Forklift Truck H300-360HD 2 / H210-48HD - H250-48HD DIMENSIONS 4-24 4-21 4-25 4-35 4-1 4-1 h4 4-5 4-4 4-2 h1 4-7 h6 1-6 1-5 4-32 4-31 2 1-8 4-19 4-20 1-9 H300-360HD 2 SPECIFICATIONS
More informationCORE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU15-32 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE
CORE IC PNEUMATIC 3000 6500 LBS. REACH NEW HEIGHTS SPECIFICATIONS 8FGU15-32 8FDU15-32 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com CORE IC PNEUMATIC CAPACITY 3000 6500 LBS. MAXIMUM
More informationSTRONG PARTNERS. TOUGH TRUCKS. Technical Guide. High Capacity ReachStacker
STRONG PARTNERS. TOUGH TRUCKS. Technical Guide High Capacity ReachStacker DIMENSIONS 4-24 A/B 4-33.4 40' Container Aisle Way 4-35 Outer Turning Radius of Truck 4-15 (Deduct 12.2" for PPS) 4-31 4-32 4-21
More informationPNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS EXPECT PRODUCTIVITY. EXPERIENCE ENHANCED PERFORMANCE WITH A POWERFUL LOW-EMISSIONS ENGINE.
More informationCORE IC CUSHION REACH NEW HEIGHTS
CORE IC CUSHION REACH NEW HEIGHTS 3000 6500 LBS. SPECIFICATIONS 8FGCU15-32 8FGCSU20 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com CORE IC CUSHION CAPACITY 3000 6500 LBS. WHEELBASE
More informationCUSHION TIRE FORKLIFT 3,000-6,500 LB CAPACITY LP GAS MODELS COMFORT AND CONVENIENCE YOU CAN RELY ON
CUSHION TIRE FORKLIFT 3,000-6,500 LB CAPACITY LP GAS MODELS COMFORT AND CONVENIENCE YOU CAN RELY ON COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FGC15N-FGC33N CUSHION TIRE FORKLIFT
More information15,500 lb Capacity Diesel Pneumatic Tire Lift Truck
15,500 lb Capacity Diesel Pneumatic Tire Lift Truck XX More Power To You Count on rugged Cat lift trucks for the high performance, dependability, and comfort you need to sustain productivity and maximize
More informationINDUSTRY-LEADING PERFORMANCE 8,000 12,000 LB. CAPACITY INTERNAL COMBUSTION PNEUMATIC TIRE LIFT TRUCKS
INDUSTRY-LEADING PERFORMANCE 8,000 12,000 LB. CAPACITY INTERNAL COMBUSTION PNEUMATIC TIRE LIFT TRUCKS 2 STRENGTH THAT YOU CAN DEPEND ON Built To Perform Designed to operate in tough environments, the Cat
More informationPneumatic Tire Forklift. 15,500 lb capacity LP Diesel models THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS
Pneumatic Tire Forklift 15,500 lb capacity LP Diesel models THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS Expect Productivity. Experience Enhanced Performance With A Powerful Low-Emissions Engine
More informationHIGH-CAPACITY IC PNEUMATIC
HIGH-CAPACITY IC PNEUMATIC REACH NEW HEIGHTS 22000 51000 LBS. SPECIFICATIONS 50-4FD100-135 50-4FDK150-160 4FD150-230 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com HIGH-CAPACITY IC
More informationHIGH-CAPACITY ELECTRIC CUSHION
HIGH-CAPACITY ELECTRIC CUSHION 15000 40000 LBS. SPECIFICATIONS THDE1500-4000-24 THDE3000-4000-30 CLASS 1 ELECTRIC MOTOR RIDERS ToyotaForklift.com HIGH-CAPACITY ELECTRIC CUSHION CAPACITY 15000 40000 LBS.
More informationPNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS
PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS EXPECT PRODUCTIVITY. EXPERIENCE ENHANCED PERFORMANCE WITH A POWERFUL LOW-EMISSIONS ENGINE
More informationHIGH-CAPACITY LARGE IC CUSHION
HIGH-CAPACITY LARGE IC CUSHION 25000 100000 LBS. SPECIFICATIONS T HDC2500-3500-24 T HDC2500-5000-30 T HDC3000-5500-36 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY LARGE
More informationLARGE IC CUSHION REACH NEW HEIGHTS
LARGE IC CUSHION REACH NEW HEIGHTS 8000 15500 LBS. SPECIFICATIONS 8FGC35U-70U CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com LARGE IC CUSHION CAPACITY 8000 15500 LBS. WHEELBASE 61.8
More informationGP DC. Counterbalanced Forklift Trucks. 19,000 / 21,000 / 23,000 / 25,000 / 28,000 lbs.
GP190-280DC Counterbalanced Forklift Trucks 19,000 / 21,000 / 23,000 / 25,000 / 28,000 lbs. Optimal productivity with low fuel consumption Outstanding maneuverability to meet the demands of tough application
More information15,500 lb Capacity. Diesel Pneumatic Tire Forklift
15,500 lb Capacity Diesel Pneumatic Tire Forklift A Reputation For Reliability Achieving the perfect balance of innovation and value is a near obsession at Mitsubishi Forklift Trucks. Our company-wide
More informationCounterbalanced Forklift Trucks
GP300-360EC Counterbalanced Forklift Trucks 30,000 / 33,000 / 36,000 lbs. Optimal productivity with low fuel consumption Outstanding maneuverability to meet the demands of tough application in lumber,
More informationFGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT
BUILT TO PERFORM IN DEMANDING APPLICATIONS. FGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT 1. Comfortable Enhanced Ergonomics From the full-suspension seat to its full tilt steering column,
More informationPNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK
PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG15N-FG35N
More informationSUPERIOR RELIABILITY 3,000 6,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK
SUPERIOR RELIABILITY 3,000 6,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK 2 TRIED-AND-TRUE PERFORMANCE 3 A Truck You Can Depend On The Cat 3,000-6,500 lb. LP gas cushion tire series offers
More informationPNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK
PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG15N-FG35N
More informationH HD 2 SERIES TECHNICAL GUIDE
H190-280HD 2 SERIES TECHNICAL GUIDE WWW.HYSTER.COM DIMENSIONS 4-1 4-1 CENTER OF GRAVITY 4-5 4-2 4-7 1-5 4-22 4-12 4-22 1-6 4-31 1-8 4-19 4-32 4-20 1-9 4-16 = Center of gravity of unladen truck a/2 l x
More informationH /48HD 2, H HD 2 SERIES TECHNICAL GUIDE
H210-250/48HD 2, H300-360HD 2 SERIES TECHNICAL GUIDE WWW.HYSTER.COM DIMENSIONS 4-1 4-1 CENTER OF GRAVITY 4-5 4-2 4-7 1-5 4-12 4-22 4-31 4-32 4-22 1-6 1-8 4-19 4-20 1-9 4-16 = Center of gravity of unladen
More informationPNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG40N-FG55N
More informationHIGH-CAPACITY IC CUSHION
HIGH-CAPACITY IC CUSHION 18000 22000 LBS. SPECIFICATIONS THDC1800-2200B-24 THDC1800-36 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY IC CUSHION CAPACITY 18000 22000 LBS.
More informationS40-70FT SERIES TECHNICAL GUIDE
S40-70FT SERIES TECHNICAL GUIDE WWW.HYSTER.COM S40-70FT DIMENSIONS 21 17 36.7 (929) 36.0 (914) 24 5 Forward 5 Back MODEL LIFT CAPACITY LOAD CENTER lb (kg) in (mm) in (mm) percent S40FT 4000 (1814) 24 (610)
More informationPneumatic Tire Forklift. 3,000-7,000 lb capacity LP Gas, Gasoline and Diesel models. Your go-to Pneumatic Tire Forklift Truck
Pneumatic Tire Forklift 3,000-7,000 lb capacity LP Gas, Gasoline and Diesel models Your go-to Pneumatic Tire Forklift Truck Comfort Comes Standard. Step into the operator compartment of an FG15N-FG35n
More informationDiesel Counterbalance Trucks HYUNDAI HEAVY INDUSTRIES
Diesel Counterbalance Trucks HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel forklift trucks. The newly designed 4-wheel counterbalance trucks
More informationPerformance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment
Performance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES n Photo may include optional equipment Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel
More informationn Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 250D-7E
n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 250D-7E NEW criterion of Big Forklift Truck Hyundai introduces a new line of 7E-series diesel forklift trucks.
More informationGP-EC. PNEUMATIC TIRE TRUCKS 30,000 33,000 36,000 lbs
GP-EC PNEUMATIC TIRE TRUCKS 30,000 33,000 36,000 lbs Yale GP-EC Series The Yale GP300-360EC pneumatic tire series of lift trucks provides low fuel consumption while delivering a capable truck that exceeds
More informationPNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT
PNEUMATIC TIRE FORKLIFT 8,000-12,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS THE PNEUMATIC TIRE FORKLIFT THAT PULLS ITS WEIGHT COMFORT COMES STANDARD. STEP INTO THE OPERATOR COMPARTMENT OF AN FG40N1-FG55N1
More informationLARGE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU60-80 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE
LARGE IC PNEUMATIC 13500 17500 LBS. REACH NEW HEIGHTS SPECIFICATIONS 8FGU60-80 8FDU60-80 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com LARGE IC PNEUMATIC CAPACITY 13500 17500 LBS.
More informationIC-PNEUMATIC LPG/DIESEL 2000 / 2500 / 3000 / 3500 kg 4000 / 5000 / 6000 / 7000 lbs.
C25-35 IC-PNEUMATIC LPG/DIESEL 2000 / 2500 / 3000 / 3500 kg 4000 / 5000 / 6000 / 7000 lbs. C20 C-32 C IC-CUSHION LPG 2000 / 2500 / 3000 / 3200 kg 4000 / 5000 / 6000 / 6500 lbs. The operator compartment
More informationHyster H HD-EC Features and Equipment
Hyster H400-500HD-EC Features and Equipment Since 1997, Hyster Company has been a leader in the empty container handling industry. To remain a top competitor, Hyster is now offering four new models and
More informationXRS-9972 INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET. Rated Container Capacity 99,000-lbs. (45 t) First Row / 4-high Stacking 9.5-ft. (2.
INDUSTRIAL LIFT TRUCK SPECIFICATION SHEET XRS-9972 Rated Container Capacity 99,000-lbs. (45 t) First Row / 4-high Stacking 9.5-ft. (2.9 m) Rated Container Capacity 90,400-lbs. (41 t) First Row / 5-high
More informationPerformance Enhanced For Stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment
Performance Enhanced For Stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES n Photo may include optional equipment Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel
More informationn Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Environmental-Friendly 180D-7E
n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Environmental-Friendly 180D-7E Excellent Cruise control Switch panel Air conditioning & heater Rear view camera (Option) Load Indicator
More informationDiesel Forklift Trucks 22,000 to 40,000 lb. Capacity H100, H120, H140, H150, H160, H180, H , H , H and H
Diesel Forklift Trucks 22,000 to 40,000 lb. H100, H120, H140, H150, H160, H180, H100-1200, H120-1200, H140-1200 and H160-1200 SERIES 1401 Safety Precise load control and maneuverability, even in constricted
More informationTHINK INSIDE THE BOX
LARGE IC CUSHION BOX CAR SPECIAL THINK INSIDE THE BOX 8000 12000 lb. Capacity Mast Height Under 90 in. Vertically Extended Counterweight 20% More Fuel Efficient 8FGC35U-55U-BCS CLASS 4 INTERNAL COMBUSTION
More informationXRS-9972 FAITH VISION WORK REACHSTACKER.
REACHSTACKER XRS-9972 Rated Container Capacity 99,000-lbs. (45 t) First Row / 4-high Stacking 9.5-ft. (2.9 m) Rated Container Capacity 90,400-lbs. (41 t) First Row / 5-high Stacking 9.5-ft. (2.9 m) 258-in.
More information9,000 lb. Forklift w/tire Changing Attachment (Propane) Req. 18-GA Georgia Ports Authority. Section 3 - Performance Specs Page 1 of 7
In this Request For Sealed Bid, the "Required" column means that the bidder must comply with the specifications as indicated, or will be considered non-responsive. The specifications in the "Desired" column
More informationHelp take operator support to a new level with Mitsubishi forklift trucks.
A Reputation For Reliability Achieving the perfect balance of innovation and value is a near obsession at Mitsubishi Forklift Trucks. Our company-wide commitment is to build forklifts that deliver reliability,
More informationDiesel Pneumatic Tire Lift Truck. Capacity: 15,500 lb
Diesel Pneumatic Tire Lift Truck Capacity: 15,500 lb DP70E Operator Friendly Tough environments require tough equipment. Cat lift trucks are built for harsh, rugged applications, without sacrificing operator
More informationLIFT TRUCK SPECIFICATIONS
LIFT TRUCK SPECIFICATIONS RT50 2-Wheel Drive 4-Wheel Drive RT60 2-Wheel Drive 4-Wheel Drive RT80 2-Wheel Drive 4-Wheel Drive TABLE OF CONTENTS RT50 / RT60 / RT80 2-WD / 4WD Specifications / Dimensions.
More informationLPG Forklift Trucks Capacity 3000, 3500, 4000 and 4500 lb H16CT, H18CT, H20CT, and H20CT-600 SERIES 391
LPG Forklift Trucks, 5, and 5 lb H16CT, H18CT, H2CT, and H2CT-6 SERIES 91 Safety Linde ProtectorFrame: The overhead guard and its supporting frame form a strong and completely enclosed protective zone
More informationLPG Forklift Trucks Capacity 3000, 3500 and 4000 lb H16CT EVO, H18CT EVO, H20CT EVO, H20CT-600 EVO
LPG Forklift Trucks Capacity 3000, 3500 and 4000 lb H16CT EVO, H18CT EVO, H20CT EVO, H20CT-600 EVO SERIES 391 Safety Linde ProtectorFrame: The overhead guard and its supporting frame form a strong and
More informationn Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Stage IIIB emissionised engine 50/60/70D-7A
n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Stage IIIB emissionised engine 50/60/70D-7A 02 n Photo may include optional equipment FORKLIFT Excellent model NEW Diesel Engine
More informationDiesel Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Photo may include optional equipment
Diesel Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Photo may include optional equipment Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel forklift
More information7 - S E R I E S P N E U M A T I C 3, ,5 0 0 L B S S P E C I F I C A T I O N S
7 - S E R I E S P N E U M A T I C 3, 0 0 0 -,5 0 0 L B S S P E C I F I C A T I O N S SAFETY CARB/EPA certified engine with 3-way Key lowering interlock Electric horn closed loop catalytic muffler system
More information555C WHEEL LOADER. Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Net Horsepower 238 kw (319 hp) Operating Weight kg (63,753 lb)
555C WHEEL LOADER Net Horsepower 238 kw (319 hp) Bucket Capacity 4.2 m 3 to 8.4 m 3 (5.5 yd 3 to 11.0 yd 3 ) Operating Weight 28918 kg (63,753 lb) World class loader meeting high production requirements
More informationPerformance Enhanced For Stage IV Engine MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Photo may include optional equipment
Performance Enhanced For Stage IV Engine MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Photo may include optional equipment Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel
More informationREADY TO WORK 7000 KG CAPACITY INTERNAL COMBUSTION PNEUMATIC TIRE LIFT TRUCK
READY TO WORK 7000 KG CAPACITY INTERNAL COMBUSTION PNEUMATIC TIRE LIFT TRUCK 2 REAL POWER, REAL PERFORMANCE Built For Your Business The Cat DP70NM pneumatic tire lift truck offers proven reliability and
More informationLPG Forklift Trucks Capacity 5000, 5500, 6000 and 6500 lbs. H25CT, H27CT, H30CT, and H32CT HYDROSTATIC, CUSHION TIRE SERIES
LPG Forklift Trucks Capacity 5000, 5500, 6000 and 6500 lbs. H25CT, H27CT, H0CT, and H2CT HYDROSTATIC, CUSHION TIRE SERIES Safety This line of trucks is designed for the demanding conditions of the Class
More informationC-G SERIES. Specifications. IC Pneumatic Tire 8,000-12,000 lbs
C-G SERIES IC Pneumatic Tire 8,000-12,000 lbs C C-G Series IC Pneumatic Tire 14 11 21 19 50" (1270 mm) 16 8 87.6-87.8" (2225-2230 mm) Std 15 18 19.8" (503 mm) - Class III* 24.3" (617 mm) - Class IV* *Carriage
More informationMOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Diesel Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series diesel forklift trucks. The newly designed 4 wheel
More informationHIGH-CAPACITY ADJUSTABLE WHEELBASE
HIGH-CAPACITY ADJUSTABLE WHEELBASE 15000 80000 LBS. SPECIFICATIONS T HDA15/25 T HDA25/35 T HDA40/60 T HDA60/80 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY ADJUSTABLE
More informationPlatinum GO4 Diesel. Engine Powered Forklifts. EPA Tier 4 Diesel 8,000 11,000 lbs. Capacities l Pneumatic Tire
Platinum GO4 Diesel R Engine Powered Forklifts EPA Tier 4 Diesel 8,000 11,000 lbs. Capacities l Pneumatic Tire S P E C I F I C A T I O N S MAIN TRUCK SPECIFICATIONS DRIVE LINE CHASSIS & WHEELS WEIGHT PERFORMANCE
More informationH40-70FT SERIES TECHNICAL GUIDE
H40-70FT SERIES TECHNICAL GUIDE WWW.HYSTER.COM H40-70FT DIMENSIONS 21 Dual Tread 63 (1601) 17 44.9 (1140) 22 24 For 90 Stacking Aisle, Add Outside Turning Radius Plus Dimension 22 Plus Load Length. 21
More informationForklift Truck Capacity to kg H 420 H 460 SERIES 356
Forklift Truck Capacity 42000 to 46000 kg H 420 H 460 SERIES 356 Safety Neutral start interlock preventing unintentional in-gear starting. Drive system inhibitors prevent incorrect downshift and reverse
More informationIC-PNEUMATIC LPG/DIESEL 2000 / 2500 / 3000 / 3500 kg 4000 / 5000 / 6000 / 7000 lbs.
C20-35 IC-PNEUMATIC LPG/DIESEL 2000 / 2500 / 3000 / 3500 kg 4000 / 5000 / 6000 / 7000 lbs. C20 C-32 C IC-CUSHION LPG 2000 / 2500 / 3000 / 3200 kg 4000 / 5000 / 6000 / 6500 lbs. The operator compartment
More informationMID IC PNEUMATIC REACH NEW HEIGHTS
MID IC PNEUMIC REACH NEW HEIGHTS 8000 11000 LBS. SPECIFICIONS 8FG35U-50U 8FD35U-50U CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMIC TIRE ToyotaForklift.com MID IC PNEUMIC CAPACITY 8000 11000 LBS. MAXIMUM FORK
More informationH30-40FT SERIES TECHNICAL GUIDE
H30-40FT SERIES TECHNICAL GUIDE WWW.HYSTER.COM H30-40FT DIMENSIONS 21 17 42.0 (1068) 22 24 For 90 Stacking Aisle, Add Outside Turning Radius Plus Dimension 22 Plus Load Length. 21 MODEL LIFT CAPACITY LOAD
More informationCX50 Pneumatic. 8,000 thru 11,000 lbs. Capacity. Preliminary Specifications
CX50 Pneumatic 8,000 thru 11,000 lbs. Capacity Preliminary Specifications CX50 Pneumatic Series 8,000 lb. Capacity GENERAL FG40ZTU-10 FD40ZTU-10 Power Type 1 LPG Diesel Operation Type 2 Sit-Down Sit-Down
More information20/25/30(s)L. ELECTRIC 80 VOLT PNEUMATIC OR SUPERELASTIC TYRES 2000 / 2500 / 3000 kg (4000 / 5000 / 6000 lbs.)
GE EX 20/25/30(s)L ELECTRIC 80 VOLT PNEUMATIC OR SUPERELASTIC TYRES 2000 / 2500 / 3000 kg (4000 / 5000 / 6000 lbs.) 420 mm The low step height means frequent entry and exit is easy and less tiring for
More informationHyster E45-65Z Lift Truck Dimensions
Hyster E45-65Z Lift Truck Dimensions 16 4.0 (102) 36 19 16 EQUAL INTERSECTING RIGHT ANGLE AISLE WITH 42" (1 067) WIDE LOAD AND 32" (813) LONG LOAD. 65.2" (1 656) 65.9" (1 674) 67.1" (1 704) 69.1" (1 755)
More informationPlatinum II Nomad Series
Platinum II Nomad Series Compact Solid Pneumatic Tire / Engine Powered Models / LPG, Dual Fuel 3,000 / 3,500 / 5,000 lb. Capacities Platinum II Nomad series Dimensions AF30 AF35 Mast Specifications & Rated
More information16/18/20s ELECTRIC 48 VOLT. (3200 / 3600 / 4000 lbs.) 3-WHEEL/4-WHEEL / 1800 / 2000 kg
GT TX X GE EX X 16/18/20s 3-WHEEL/4-WHEEL ELECTRIC 48 VOLT 1600 / 1800 / 2000 kg (3200 / 3600 / 4000 lbs.) Superelastic tyres provide a soft ride and allow for indoor/outdoor operation. 410 mm The low
More informationTechnical Guide. Sit-down, Counterbalanced IC, Cushion Tire
Technical Guide Sit-down, Counterbalanced IC, Cushion Tire S40-70FT DIMENSIONS 21 17 36.7 (929) 36.0 (914) 24 5 Forward 5 Back TRUCK MODEL Lift Capacity lb (kg) Load Center in (mm) P in (mm) R Percent
More informationSpecification. Dimension MOVING YOU FURTHER. Mast Specification. Load Capacity. Optional Items HYUNDAI CONSTRUCTION EQUIPMENT.
Dimension Specification Mast Specification 2- Stage Limited free lift 3 - Stage full free lift Mast Type Load Capacity WEIGHT(kg) 31000 28000 25000 22000 19000 Optional Items Maximum Fork Height (mm) Overall
More informationTD-8R ENGINE COOLING OPERATOR STATION ELECTRICAL HYDRAULICS CRAWLER DOZERS. EPA Tier 3/EU Stage IIIA STANDARD, LGP TD-8R TD-8R.
CRAWLER DOZERS EPA Tier 3/EU Stage IIIA STANDARD, LGP ENGINE Make and model Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Cummins QSB3.3 EPA Tier 3/EU Stage IIIA 3.3 l (199
More informationPROVEN FLEXIBILITY 7,000 15,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK
PROVEN FLEXIBILITY 7,000 15,500 LB. CAPACITY INTERNAL COMBUSTION CUSHION TIRE LIFT TRUCK 2 UNCOMPROMISING PERFORMANCE Optimum Versatility Powered by a rugged PSI 4X 4.3 liter V6 EPA compliant engine, the
More informationC-G. 8,000-12,000 lb. Capacity IC Pneumatic Tire. Specifications
C-G 8,000-12,000 lb. Capacity IC Pneumatic Tire C IC Pneumatic Tire 15 20 13 17 8 16 18 9 3 37 21 33 11 14 Characteristics Dimensions Performance Weight Chassis 1 Model CG35S-7 CG40S-7 CG45S-7 CG50C-7
More informationWe engineer and build what you need!
We engineer and build what you need! Excellence and Experience for over 88 years and counting Featured trucks in this picture are: XH-350L (Cap. 35,000-lbs at 48 L.C.) Featured trucks in this picture are:
More informationLP Gas Cushion Tire Lift Trucks. Capacity: 3,000-6,500 lb
LP Gas Cushion Tire Lift Trucks Capacity: 3,000-6,500 lb 2C3000-2C6500 Series Dependable Performance Engineered for maximum performance in a wide range of industries, the 3,000-6,500 lb capacity internal
More information22, ,000+ LBS. Make the P-Series the workhorse of your fleet.
capacity - 60,000 lbs. 22,000-100,000+ LBS. The P-Series is the premiere liftruck for all your heavy-duty lifting needs. At competitive prices, the P-Series comes STANDARD as a heavy-duty level liftruck
More information