BAUER GB 60. Hydraulic Grab Carrier 11/2012

Transcription

1 BAUER GB 60 Hydraulic Grab Carrier 11/2012

2 Main Features of BAUER GB 60 Strong box type mast HDSG winding system Optional GCS system M6/L3/T5 class synchronized double main winches Optional patented turning device GV 3 BAUER special design base machine BH 80 Hydraulic grab equipped with heavy duty steering flaps. DHG grab closing force 120 t closing / opening time 7~9 second Optional: DHG/CF heavy duty grab Additional weight on grab GV 3 turning device Gravity adjustment device UW 115 extendable undercarriage Copyright BAUER Maschinen GmbH, Germany 2

3 8800 Dimensions (with GV3) 5800 (without GV3) Mast height Overall crawler length Overall crawler width Center line of grab to swing center Swing radius of rear end 18,500 mm 6,100 mm 3,380 4,580 mm 4,500 6,000 mm 4,300 mm Technical data Wall thickness Wall depth Maximum hoisting force Max. hook load for pulley (inclusive filling) Max. hook load for rocker (inclusive filling) Single rope force System pressure Main pump maximum flow Total weight (without grab) m 80 m 600 kn 32 t 30 t 300 kn 320 bar 2 x 320 l/min 89 t Copyright BAUER Maschinen GmbH, Germany 3

4 Base carrier BH 80 Engine Rated output ISO Engine conforms to Exhaust Emission Standard Diesel tank capacity Ambient air temperature (at full power) Sound pressure level in cabin (EN 791, Annex A) Sound power level (2000/14/EG u. EN 791, Annex A) Undercarriage Track shoe outer distance Track shoe width Towing force Crawler speed Cummins QSM ,900 U/min (rpm) EEC 97/68EC Stage III und EPA/CARB TIER l up to 42 C LPA 80 db(a) LWA 113 db(a) UW 115 3,380 4,580 mm 800 mm 731 kn 1.22 km/h Lifting system of grab Rocker system Pulley system GB 60 has two different lifting system, the Rocker system allow the hook load 30 ton include soil filling*, the Pulley system allow hook load 32 ton include soil filling**. * working radius < 5,500 mm ** working radius < 5,250 mm Copyright BAUER Maschinen GmbH, Germany 4

5 Grabs DHG, a series of BAUER diaphragm wall grab which is rope suspended and operated hydraulically. The 80 / 120 t closing force and 6~10 seconds shovel opening / closing time are activated by a cylinder, which is installed vertically inside of base body. High closing forces in combination with possibility of multiple grabbing at the trench bottom result in high excavation rates even in very dense and very hard soil strata. DHG/AS DHG/SF 12 flaps DHG/CF 8 flaps+gv 3 DHG/AS DHG/SF DHG/CF Length 2800 mm 2800 mm 2800 mm body witdh 280 mm 580 mm 780 mm Closing force 80 t 80 / 120 t 120 t Configurations DHG/AS 1 DHG/SF 1 Option A 2 Option B 3 DHG/CF 1 Option A 2 Option B 3 Width (mm) Volume (m 3 ) Weight (kg) Min. 4 (Max.) 10,700 (14,300) 10,750 (17,100) 11,550 (14,550) 12,700 (17,700) 13,450 (18,450) 14,100 (19,100) Weight (kg) Min. 4 (Max.) 14,150 (15,350) 15,900 (20,900) 16,750 (21,750) 17,550 (22,550) 15,000 (18,050) 16,750 (21,750) 17,600 (22,600) 18,400 (23,400) 14,650 (16,450) 16,000 (20,000) 17,000 (21,000) 19,100 (23,100) Weight (kg) Min. 4 (Max.) 17,200 (19,050) 19,150 (23,150) 20,300 (24,300) 22,450 (25,450)* (26,450)** 18,900 (20,750) 20,850 (24,850) 22,000 (26,000) 24,150 (25,150)* (27,150)** 1 Weight data are approximately values exclusive all optional device. 2 Option A include 12 flaps units. (weight of single flap unit is about 230 kg) 3 Option B include 8 flaps unit and GV 3 turning deice. (weight of single flap unit is 230 kg, weight of GV 3 is 2,000 kg) 4 Min. is the basic weight of grab, Max. show the grab with maximum additional weight. * Maximum weight for Rocker lifting system ** Maximum weight for Pulley lifting system Copyright BAUER Maschinen GmbH, Germany 5

6 Grab Control System GCS The GCS grab surveying system continuously monitors the verticality of diaphragm wall trenches during excavation. An inclinometer for measuring the inclination of the trench is built into the grab. Data transfer from the grab to the operator's cabin is by heavy-duty electrical cable, which is automatically reeled off and on by a hydraulically operated cable recoil system. By using heavy-duty electronic components for data collection, processing and visualization, operation of grab is safeguarded even under extreme conditions. Data are visualized on a 10 inches touch-screen monitor with a luminous intensity of 350 candelas. In order to increase the measuring accuracy, it is recommended to carry out a separate survey of trench after it's completion. All result can be printed out on a printer. (The GCS system is optional.) Deviation on the excavation monitor Correct trench deviation by steering flaps The new developing DHG/SF & DHG/CF, equipped with Flap Control System, which allowed operator reading the deviation for both X and Y directions from excavation monitor in cabin, and adjust the grab position instantly through 8 or 12 numbers flaps to correct the deviation. Copyright BAUER Maschinen GmbH, Germany 6

7 Optional grab turning device GV 3 GV 3 in 90 grab width 600 mm In pulley operation 800 mm GV 3 in 25 grab width 600 mm BAUER patented turning device GV 3, the latest development for diaphragm wall grab system, which is hydraulically operated with a very compact dimension. Especially in limit working space, GV 3 turning device allows BAUER GB rigs to reach diaphragm wall panels at almost any difficult position, such as corner panels or cut-off wall panels on the top of dam. In complicate soil condition, GV 3 can rotate grab body 180 any time to achieve better verticality control. Transportation Data G=2t G = 76 t G = 5.3 t Copyright BAUER Maschinen GmbH, Germany G = 2 t (each) G = 84 t 7

8 Asia Pacific Sales BAUER Technologies Far East PTE LTD No. 30 Tuas Avenue 11 Singapore Tel. (+65) Fax. (+65) BAUER Maschinen GmbH BAUER Str.1 D Schrobenhausen Tel: +49 (0) Fax: +49 (0) www. bauer.de Technical Specifications are subject to change without prior notice and incurring responsibility for machines previously sold. The shown machines may have special equipment. Technical data do not consider power losses. Error and misprints reserved /2012