Rail Safety and Standards Board
|
|
- Jemimah Poole
- 6 years ago
- Views:
Transcription
1 Rail Safety and Standards Board Certificate of Derogation from a Railway Group Standard (under 8.3 of the Railway Group Standards Code) Derogation Number: Applicant: Subject Matter of Derogation: RGS Number: RGS Issue Number: Professional Head of Signal Engineering, Network Rail, 40 Melton Street, London NW1 2EE Lineside operational safety signs GI/RT7033 One RGS Issue Date: June 2003 RGS Title: RGS Clause: RGS Clause Requirements: LinesIde Operational Safety Signs Section AE - Enhanced Permissible Speed Signs Section AE - 'Enhanced permissible Speed Indicators' states: "SIGN AE01m Mandated by Railway Group Standard GE/RT8012. These signs display the enhanced permissible speed applicable to the section of line beyond the sign up to the commencement of the following permissible speed section, but subject to any exceptions defined in the sectional appendix applicable to that line and GO/RT3000. A permissible speed indicator without an enhanced permissible speed indicator means that no enhanced permissible speed is authorised over the section of line beyond the sign. The standard dimensions shall be used, unless the clearances are inadequate, in which case the signs designed for limited clearance areas shall be used (refer to signs defined under AE02m). Display of values in miles per hour: - Red roundel - White surround. Class 1 retro-reflectivity shall be applied. Single values below 100 shall be 340mm high centred on the width of the sign. It is permissible to reduce the size of values of 100 and above, but not below 315mm high, and only when the space available so requires. The text "EPS" shall be 120mm high centred on the width of the sign.
2 The typeface defined in BS 3693B: 1964 shall be used. approaching the location concerned. SIGN AE02m Mandated by Railway Group Standard GE/RT8012 These signs display the enhanced permissible speed applicable to the section of line beyond the sign up to the commencement of any subsequent permissible speed section, but subject to any exceptions defined in the sectional appendix applicable to that line and GO/RT3000. This signs shall also be used where enhanced permissible speed values are repeated within a signed speed section. A permissible speed indicator without an enhanced permissible speed indicator means that no enhanced permissible speed is authorised over the section of line beyond the sign. These signs shall be used where the clearances for the standard signs are inadequate (refer to signs defined under AE01). Display of values in miles per hour: - Red roundel - White surround. Class 1, or better, retro-reflectivity shall be applied. Values shall be not less than 160mm high centred on the width of the sign. Larger digits shall be used where the space available permits. Text identifying non-standard differential permissible speeds shall be 130mm high centred on the width of the sign. The typeface defined in BS 3693B:1964 shall be used. approaching the location concerned. Sign AE03m: Mandated by Railway Group Standard GE/RT8012. These signs provide warning of a reduction in enhanced permissible speed ahead. A permissible speed warning indicator without an enhanced permissible speed warning indicator means that no enhanced permissible speed is authorised over the section of line beyond the sign.
3 The standard dimensions shall be used, unless the clearances are inadequate, in which case the signs for limited clearance areas shall be used (refer to signs defined under AE04m). - Display of values in miles per hour only. Class 1 retro-reflectivity shall be applied. Single values shall be 315mm high centred on the width of the sign. Standard differential values shall be 190 mm high centred on the width of the sign. Text identifying non-standard differential permissible speeds shall be 250mm high, and the values shall be 315mm high; both centred on the width of the sign. The typeface defined in BS 3693B:1964 shall be used. approaching the location concerned. SIGN AE04m: Mandated by Railway Group Standard GE/RT8012. These signs provide warning of a reduction in enhanced permissible speed ahead. These signs shall be used where the clearances for the full sized signs are inadequate (refer to signs defined under AE03m). - Display of values in mph only. Class 1, or better, retro-reflectivity shall be applied. This shall be used as shown. It shall be used only in conjunction with the special limited clearance warning indicator for permissible speeds (ref AD04m). approaching the location concerned."
4 Standards Committee Name: Standards Committee Date: Standards Committee Min Ref: Uncontrolled When Printed CCS 11/05/ /CCS/05/236 Scope of Derogation: Nature and Degree of Derogation: The non-compliance relates to the West Coast Main Line consisting of London to Rugby, Rugby to Stafford, Stafford to Carstairs and Colwich via Stoke to Cheadle Hulme. Non compliance is required for the use of full-size differential EPS signs that are not currently referenced in the above standard. It is proposed that the standard is revised to refer to full size differential EPS signs. The use of full size differential EPS signs has been granted in principle by the issue of non-compliance certificate ref: 03/053/NC against GE/RT8012. Both Class 390 and Class 221 tilting trains operate on West Coast Main Line (WCML) routes. These vehicles have different characteristics and therefore different Enhanced Permissible Speed (EPS) profiles. The two EPS profiles are signed at the lineside. A Non-compliance pending Railway Group Standard Revision has been obtained against GE/RT8012 via CCRM, and a separate submission has been made by WCRM, allowing for the use of a full size differential EPS signs. GI/RT7033 does not show any differential EPS sign. The new form of EPS signage was published in GI/RT7033 Lineside Operational Safety Signs in June However the current version of the standard does not show the full size differential EPS signs. Document /01 Rev C, January 2003, "Cross Country Route Modernisation, Conventional Driver Interviews on Differential Enhanced Permissible Speeds Signage" by Mott MacDonald, shows the signs that have been implemented and a copy of the relevant sheets are included in the Supporting Document. The reason for the non-compliance is that the WCRM project has installed and commissioned full size differential EPS signs on the WCML. The project requests an update to GI/RT7033 to show the full size differential EPS signs. This non-compliance is pending revision to GI/RT7033 and the new Rule Book - therefore dispensation is requested. This Non-compliance application does not seek acceptance of signing four speed values at a given location. No more than three speed values will be signed at a given location, nor does this application seek acceptance of the use of miniature differential EPS signage. This Non-compliance pending change to Railway Group Standards is sought for the West Coast Main Line in total. Non-compliant signs have been installed on the West Coast Main Line network where Class 390 and Class 221 trains operate. Installations have been carried out progressively from August 2003 to present (December 2005).
5 Alternative Measures Controlling Risk: Uncontrolled When Printed 1. The proposal is to utilise differential EPS signs. 2. In addition, the proposal is to request amendment to the Rule Book with respect to Differential EPS signage. The Network Rail Cross Country Route Modernisation (CCRM) Programme and Virgin Trains commissioned an assessment to gather 'conventional' train driver feedback in the use of differential EPS speeds depicted by the arrangement of the Class 221 speed over the Class 390 speed. The signage forms were assembled on a trial site (Norton Bridge) with examples of differential EPS Warning Indicators and Commencement Boards. The form, positioning and arrangements of the signs were considered by this study. This study concluded that the configuration of a PS board with a differential EPS board placed below it on the same post is an acceptable and workable arrangement, causing minimal confusion to conventional train drivers. Any confusion that did arise could be mitigated by training. The report also identified that the main distinguishing features of the differential EPS signs was the colour, shape and position. Further, a Human Factors study concluded that Drivers learn Permissible Speeds that apply as part of their route knowledge and do not rely on lineside speed signs. Hence, periods of Driver Briefing and Driver Training have preceeded the introduction of these speed signs to facilitate the development of route knowledge. All drivers are given the opportunity to provide feedback on the form of the EPS signage as a whole. The WCRM driver training area (Hanslope - Atherstone) has differential speed profiles for the Class 390 & Class 221 trains and differential EPS signage was erected on this section of route as part of the overall driver training process. To date, no negative feedback relating to the full size differential EPS signs has been received. The speed indicated at the top of the board relates to class 221 and the speed indicated at the bottom relates to class 390. Details of the signs are in appendix E of the supporting documents. Support Documents: Extracts of the following documents are included in document ref W SS-REP in support of this application. 1. Document 8479/Railtrack & Virgin Trains Rev.03, May 2002 "Human Factors Study - Lineside Speed Signage" by ERM Risk. 2. Document /01 Rev.C, January 2003, "Cross Country Route Modernisation, Conventional Driver Interviews on Differential Enhanced Permissible Speeds Signage" by Mott MacDonald. 3. Certficate No. 03/053/NC Dated 1st May 2003 in respect to GE/RT8012 submitted by CCRM for differential EPS signs. 4. Document Ref /520012/A8 May 2001 "West Coast Main Line Route Modernisation, Supervision of Enhanced Permissible Speeds - Development of EPS Signage Profiles" produced by Mott MacDonald for Railtrack. 5. Document Ref /J008/346B September 2002 "Supervision of Enhanced Permissible Speeds - Addendum to Part 1 of the Analysis of Driver Feedback from Test Site A on EPS Signage Profiles" produced by Mott MacDonald for Railtrack. Safety Justification: Through the Human Factors study and Driver Training / Briefing / Feedback processes, it is understood that the use of differential EPS signs does not introduce additional hazards for either conventional or tilting train drivers. The principle of using differential EPS signs has been established
6 and accepted by RSSB (given the Certificate of Non-compliance granted against GE/RT8012) and to date, no negative feedback has been received regarding the use of the differential EPS signs. Further, it should also be noted that the TASS (Tilt Authorisation and Speed Supervision) system installed on all EPS routes will prevent EPS trains exceeding the maximum permitted speed of either the Class 221 or Class 390. The Network Rail Cross Country Route Modernisation (CCRM) Programme and Virgin Trains commissioned an assessment to gather 'conventional' train driver feedback in the use of differential EPS speeds depicted by the arrangement of the Class 221 speed over the Class 390 speed. The signage forms were assembled on a trial site (Norton Bridge) with examples of differential EPS Warning Indicators and Commencement Boards. The form, positioning and arrangements of the signs were considered by this study. This study concluded that the configuration of a PS board with a differential EPS board placed below it on the same post is an acceptable and workable arrangement, causing minimal confusion to conventional train drivers. Any confusion that did arise could be mitigated by training. The report also identified that the main distinguishing features of the differential EPS signs was the colour, shape and position. Further, a Human Factors study concluded that Drivers learn Permissible Speeds that apply as part of their route knowledge and do not rely on lineside speed signs. Hence, periods of Driver Briefing and Driver Training have preceded the introduction of these speed signs to facilitate the development of route knowledge. All drivers are given the opportunity to provide feedback on the form of the EPS signage as a whole. The WCRM driver training area (Hanslope - Atherstone) has differential speed speed profiles for the Class 390 & Class 221 trains and differential EPS signage was erected on this section of route as part of the overall driver training process. To date, no negative feedback relating to the full size differential EPS signs has been received. Additional Action/Observations: Upon receipt, the applicant is required to identify affected, interfacing parties and copy this certificate, together with supporting information, to those parties. Applicant's Ref. Tracker No Signed by Ian Maxwell for Jeff Allan on 02/06/2006 Authorised by: Jeff Allan Head of Control Command and Signalling, and Energy Delivery Unit Derogation Issue Date: 02/06/2006
Controlling the Speed of Tilting Trains Through Curves
Controlling the Speed of Tilting Trains Through Curves Synopsis This document mandates the means by which Tilting Trains may be operated at higher speeds than nontilting trains around curves. Signatures
More informationDeviation from a Railway Group Standard (In accordance with the Railway Group Standards Code, Issue Four, part 7)
Deviation from a Railway Group Standard (In accordance with the Railway Group Standards Code, Issue Four, part 7) Deviation Number: 14/078/DEV 1. Start and End Date: From 26/06/2014 to 22/10/2018 2. Details
More informationTrain Safety Systems. Railway Group Standard GM/RT2185 Issue Two Date December 2001
Train Safety Systems Synopsis This document defines the requirements for train safety systems to enable safe operation of trains on Railtrack controlled infrastructure. Signatures removed from electronic
More informationLineside Signal Spacing and Speed Signage
Document comes into force and supersedes GKRT0075 Iss 3 on 05/12/15 With effect from 03/03/18 parts of this document have been superseded by Date September 15 Lineside Signal Spacing and Speed Synopsis
More informationRapid Response. Lineside Signal Spacing. Railway Group Standard GK/RT0034 Issue Three Date September 1998
Rapid Response Railway Group Standard Lineside Signal Spacing Synopsis This Standard specifies the minimum distance that must be provided between the first signal displaying a cautionary aspect and the
More informationCompatibility Between Electric Trains and Electrification Systems
Compatibility Between Electric Trains and Electrification Systems Synopsis Process for managing change that affects the compatibility between electric trains and electrification systems Submitted by Signatures
More informationRisk Management of Rail Vehicle Axle Bearings
Railway Group Standard Risk Management of Rail Vehicle Axle Bearings Synopsis This Railway Group Standard mandates that there shall be riskbased processes to minimise and detect failures of rail vehicle
More informationSigning of Permissible Speeds and Speed Restrictions
Document to be withdrawn as of 04/06/11 Railway Group Standard published on 05/03/11 Date December 00 Signing of Permissible Speeds and Speed Restrictions Synopsis This document defines the principles
More informationModule SP. Speeds. GE/RT8000/SP Rule Book. Issue 5. September 2015
GE/RT8000/SP Rule Book Module SP Speeds Issue 5 September 2015 Comes into force 05 December 2015 Published by: RSSB The authoritative version of this document is available at www.rssb.co.uk/rgsonline Contents
More informationLineside Operational Safety Signs
Date June 2003 Lineside Operational Safety Signs Synopsis This document mandates the arrangements for the management and specification of lineside operational safety signs in order to provide consistency
More informationTrack Circuit Assister Configuration for Rail Vehicles
Track Circuit Assister Configuration for Rail Synopsis This Standard mandates where TCAs shall be fitted onto a vehicle and how they shall be set up. It also contains the requirements for testing a TCA.
More informationMechanical Trainstop Systems
Mechanical Trainstop Systems Synopsis This document defines the functional requirements for mechanical trainstop systems and the requirements relating to their use on both track and trains. Signatures
More informationWithdrawn Document Uncontrolled When Printed. SP (issue 1).qxd 16/4/03 1:04 pm Page 1. Module SP. GE/RT SP Rule Book. Speeds. Issue 1.
SP (issue 1).qxd 16/4/03 1:04 pm Page 1 GE/RT8000 - SP Rule Book Module SP Speeds Issue 1 June 2003 Comes into force 6 December 2003 SP (issue 1).qxd 16/4/03 1:04 pm Page 2 Issue Date Comments Comes into
More information(Text with EEA relevance)
L 150/10 COMMISSION REGULATION (EU) 2015/924 of 8 June 2015 amending Regulation (EU) No 321/2013 concerning the technical specification for interoperability relating to the rolling stock freight wagons
More informationGC108: EU Code: Emergency & Restoration: Black start testing requirement
Stage 01: Modification Proposal Grid Code GC108: EU Code: Emergency & Restoration: Black start testing requirement Purpose of Modification: This modification seeks to align the GB Grid Code with the European
More informationControl, Safe Use and Operation of Excavators, Loaders and Earth Moving Equipment
Control, Safe Use and Operation of Excavators, Loaders and Earth Moving Equipment Page 1 of 14 Part A Synopsis A standard detailing the requirements for the control, safe use and operation of excavators,
More informationDeviation from a Railway Group Standard
Deviation from a Railway Group Standard (In accordance with the Railway Group Standards Code, Issue Four, part 7 and the Standards Manual, part 16) Deviation number: 16-073-DEV 1. Problem statement There
More informationPermissible Track Forces for Railway Vehicles
British Railways Board Page 1 of 11 Part A Synopsis This document prescribes design and maintenance requirements for traction and rolling stock and for on track plant to ensure that interactive forces
More informationControl, Safe Use and Operation of Road-Rail Plant
Control, Safe Use and Operation of Page 1 of 13 Part A Synopsis A Standard detailing the requirements for the control, safe use and operation of road-rail plant in the railway environment. Approval and
More informationEquipotential Bonding of Rail Vehicles to Running Rail Potential
Railway Group Standard Equipotential Bonding of Rail Vehicles to Running Rail Potential Synopsis This standard mandates the requirements for equipotenial bonding of rail vehicles to comply with the Electricity
More informationInterface between Rail Vehicle Weights and Underline Bridges
Interface between Rail Vehicle Weights and Synopsis This document sets out the requirements for managing the risk of overloading of underline bridges by rail vehicles Submitted by Signatures removed from
More informationGC108: EU Code: Emergency & Restoration: Black start testing requirement
Stage 01: Modification Proposal Grid Code GC108: EU Code: Emergency & Restoration: Black start testing requirement Purpose of Modification: This modification seeks to align the GB Grid Code with the European
More informationCOMMISSION REGULATION (EU) No /.. of XXX
EUROPEAN COMMISSION Brussels, XXX B4 1667206 [ ](2014) XXX DRAFT 30.04.2014 COMMISSION REGULATION (EU) No /.. of XXX supplementing Regulation (EC) No 661/2009 of the European Parliament and of the Council
More informationResearch Brief. Impact of higher 25kV fault currents. T873 - October Background. Aims
Research Brief Impact of higher 25kV fault currents Background Increasing the maximum fault levels at traction feeder stations has the potential to reduce the costs of electrification schemes. The potential
More informationWELLINGTON, NEW ZEALAND. PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998
WELLINGTON, NEW ZEALAND PURSUANT to sections 152, 155(a) and (e) and 158(a)(i) of the Land Transport Act 1998 I, Gerry Brownlee, Minister of Transport, HEREBY make the following ordinary Rule: Land Transport
More informationGuidance for Low Voltage Electrical Installations
Guidance for Low Voltage Electrical Synopsis This document provides information in support of GI/RT7007 Low Voltage Electrical. Signatures removed from electronic version Submitted by Anne E Blakeney Standards
More informationThe Project North West Electrification Programme
Assessment of Technical Specifications for Interoperability on Projects Background The European Union has mandated moving towards interoperable railways to lower boundaries for cross-eu running of trains.
More informationImplementation of Tilt Activation Speed Supervision on West Coast Mainline
Implementation of Tilt Activation Speed Supervision on West Coast Mainline Mike Hoptroff Head of Operations Strategy Agenda We ve come a long way... ...but speed supervision isn t new TASS on WCML Ten
More informationLow Voltage Power Supplies in Electrified Areas
Low Voltage Power Supplies in Electrified Areas Synopsis This document mandates requirements for control of return and stray currents and the management of earthing for low voltage power supplies in electrified
More informationUncontrolled When Printed Document comes into force 06/12/2014 Supersedes GERT8000-T10 Iss 3 on 06/12/2014
GE/RT8000/T10 Rule Book Module T10 Duties of a designated person () and people working on rail vehicles Issue 4 September 2014 Comes into force 06 December 2014 Published by: RSSB Block 2 Angel Square
More informationData Link Services Airworthiness and Conformance to Commission Regulation (EC) No 29/2009
Data Link Services Airworthiness and Conformance to Commission Regulation (EC) No 29/2009 Guidance to Applicants EUROCONTROL Disclaimer This material has been created by EUROCONTROL, EASA and EC as guidance
More informationCertificate of Acceptance
Class II Hybrid Signalling Power Products Product Description Product Image A range of Class II Hybrid Signalling Transformers, Transformer-rectifiers and Multioutput Power Supplies for Signalling applications.
More informationLevel 3 Award in the Requirements for Electrical Installations BS 7671:2018 ( )
Level 3 Award in the Requirements for Electrical Installations BS 7671:2018 (2382-18) March 2018 Version 1.0 FAQs 1 18 th Edition IET Wiring Regulations 2018 FAQs When will the 18 th Edition of BS 7671
More informationStructural Requirements For Drawgear And Buffers On Railway Vehicles
Structural Requirements For Drawgear And Buffers On Railway Vehicles Submitted by D. Boocock Nominated Responsible Manager Synopsis This standard prescribes the strength requirements for drawgear and buffers
More informationNational technical rules for vehicles Related Control Command and Signalling Requirements
National technical rules for vehicles Related Control Command and Signalling Requirements Note: Relevant TSI is Control, Command and Signalling (Commission Regulation (EU) 2016/919 of 27 May 2016 - which
More informationCMP294: National Grid Legal Separation changes to CUSC Section 14. CUSC Modification Proposal Form
CUSC Modification Proposal Form CMP294: National Grid Legal Separation changes to CUSC Section 14 At what stage is this document in the process? 01 02 Proposal Form Workgroup Consultation 03 Workgroup
More informationOfficial Journal of the European Union. (Non-legislative acts) REGULATIONS
10.1.2019 L 8 I/1 II (Non-legislative acts) REGULATIONS REGULATION (EU) 2019/26 OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 8 January 2019 complementing Union type-approval legislation with regard to
More informationENE Standards Committee Chairman s presentation. Presented by David Knights 25 th January 2018
ENE Standards Committee Chairman s presentation Presented by David Knights 25 th January 2018 1. Key issues from the last six months (UK standards) 1. Electrical clearances remain an issue: RSSB has agreed
More informationTORONTO TRANSIT COMMISSION REPORT NO.
Form Revised: February 2005 TORONTO TRANSIT COMMISSION REPORT NO. MEETING DATE: September 27, 2012 SUBJECT: NOTICE OF AWARD PROCUREMENT AUTHORIZATION - ARTICULATED BUSES INFORMATION ITEM RECOMMENDATION
More informationUnderstanding BS 1363 Amendment No.4
Intertek Hilton House, Corporation Street, Rugby, Warwickshire, CV21 2DN UK info.uk@intertek.com 01788 578435 www.intertek.com Introduction A new Amendment applying to several parts of the BS 1363 standard
More informationECOMP.3.A EUROPEAN UNION. Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 ENT 229 MI 914 ENV 837 AGRI 596 PREP-BXT 58 CODEC 2164
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 T 229 MI 914 V 837 AGRI 596 PREP-BXT 58 CODEC 2164 LEGISLATIVE ACTS AND OTHER INSTRUMTS
More informationAddressing ambiguity in how electricity industry legislation applies to secondary networks
In Confidence Office of the Minister of Energy and Resources Chair, Cabinet Business Committee Addressing ambiguity in how electricity industry legislation applies to secondary networks Proposal 1 This
More informationPOSITION PAPER Version 3.0
POSITION PAPER Version 3.0 Revision of the Technical Specification for Interoperability / Energy (ENE) Brussels, September 26 th, 2012 1. REFERENCE DOCUMENT UNION RAIL SYSTEM - SUBSYSTEM Energy - TSI Energy
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRVA/2018/2 Distr.: General 16 July 2018 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationControl, Safe Use and Operation of Forklift Trucks and Sideloaders
Control, Safe Use and Operation of Forklift Trucks and Sideloaders British Railways Board Page 1 of 12 Part A Synopsis A standard detailing the requirements for control, safe use and operation of forklift
More informationWORKING NEAR OR ADJACENT TO A DC CONDUCTOR RAIL (DCCR)
KEYPOINTS WORKING NEAR OR ADJACENT TO A DC CONDUCTOR RAIL (DCCR) Issue two valid from July 2017 CERTIFICATION REQUIRED: CURRENT SENTINEL CARD ENDORSED WITH PTS COMPETENCY Sentinel Cards and Track Visitor
More informationCIRCULAR IMO FAQ on the sulphur limits in Emission Control Areas (ECAs)
12 JANUARY 2015 / C15001 CIRCULAR IMO FAQ on the sulphur limits in Emission Control Areas (ECAs) The International Maritime Organization (IMO) has published Frequently Asked Questions about sulphur limits
More informationPS 127 Abnormal / Indivisible Loads Policy
PS 127 Abnormal / Indivisible Loads Policy June 2017 Version 1.5 Statement of legislative compliance This document has been drafted to comply with the general and specific duties in the Equality Act 2010;
More informationAcceptance of Trams and Light Rail or Metro Vehicles for Shared Running on Railtrack Controlled Infrastructure
Acceptance of Trams and Light Rail or Metro Vehicles for Shared Running on Railtrack Controlled Infrastructure Synopsis This Standard defines the mandatory requirements for trams, light rail or metro vehicles
More informationCertificate of Acceptance
HILTI TE6, TE7 and TE30 36 volt hand drills Product Description Product Image TE6, TE7 and TE30 36 volt hand drills TE6 and TE7 are existing Hilti drilling units to be replaced, through continued renewals
More informationRail Industry Standard for the Design of On- Track Machines in Travelling and Working Modes
Supersedes Iss 1 with effect from 01/09/2018 for the Design of On- Track Machines in Travelling and Working Modes Synopsis This document sets out requirements and guidance for the application of the BS
More informationCompatibility Requirements for Braking Systems of Rail Vehicles
GMRT2043 Iss 2, GMRT2044 Iss 4, Iss 3, GMRT2046 Iss 1, GMGN2615 Iss 1 (G 2.1.83 to G 2.1.132 inclusive) Compatibility Requirements for Braking Systems of Rail Synopsis This document defines the compatibility
More informationP.L. 2007, c.348 Approved January 13, 2008
P.L. 2007, c.348 Approved January 13, 2008 INTRODUCED JUNE 11, 2007 ASSEMBLY, No. 4314 STATE OF NEW JERSEY 212th LEGISLATURE Sponsored by: Assemblyman JOHN S. WISNIEWSKI District 19 (Middlesex) Assemblyman
More informationResearch Brief. Feasibility study into raising and lowering pantographs while trains are in motion. T778 - July Overview. Aims.
Research Brief Feasibility study into raising and lowering pantographs while trains are in motion Overview Currently, raising the pantograph on the move on the GB railway is not standard practice, being
More informationDRAFT RECOMMENDATION N. 006REC1072
Making the railway system work better for society. DRAFT RECOMMENDATION N. 006REC1072 OF THE EUROPEAN UNION AGENCY FOR RAILWAYS ON The amendment of Commission Regulation (EU) No 1304/2014 concerning the
More informationBWM CONVENTION: OBJECTIVES, STRATEGIES, AND ACTIONS
BWM CONVENTION: OBJECTIVES, STRATEGIES, AND ACTIONS Villa Doria d Angri, Naples 28 April 2017 Presented by: Simon Bonnett Safety & Technical Manager AGENDA Introduction to the International Convention
More informationClearRoute Training Courses
ClearRoute Training Courses Balfour Beatty Rail offers a wide range of courses designed to benefit all levels of users of its market leading clearance software, ClearRoute. See inside for full details
More informationControlled Parking Zones Commentary
Controlled Parking Zones Commentary November 2012 Residents Association Controlled Parking Zones Commentary 244884 TPN ITQ 001 C http://localhost:3579/ahjycdovl0vvtkfqau1tl0rpq1vnru5uly9ilw FjdGlvbiUzYV9hX2FmaW5kaXRlbWluZm9hY3Rpb25fYWl0ZW1fY19hMT
More informationGM/RC2532. Recommendations for Rail Vehicle Emergency and Safety Equipment. Uncontrolled When Printed. Railway Group Recommendations for GM/RT2130
RC Published by Rail Safety and Standards Board Evergreen House 160 Euston Road London NW1 2DX Copyright 2008 Rail Safety and Standards Board Limited GM/RC2532 Issue One: June 2008 Railway Group Recommendations
More informationBranding of Wheels,Tyres and Axles
Branding of Wheels,Tyres and Axles Signatures removed from electronic version Submitted by G A Clayton Nominated Responsible Manager Synopsis This standard details the branding requirements for all wheels,
More informationWestern Power s list of exemptions from compliance from Technical Rules granted after 1 July 2007.
Western Power s list of exemptions from compliance from Technical Rules granted after 1 July 2007. No Date of Exemption To whom Exemption was granted Clause to which Exemption has been granted Concise
More informationHandbook 11. Issue 6. Duties of the person in charge of the possession (PICOP) GERT8000-HB11 Rule Book
GERT8000-HB11 Rule Book Duties of the person in charge of the possession (PICOP) Issue 6 September 2017 Comes into force 02 December 2017 Handbook 11 Uncontrolled when printed Published by: RSSB The authoritative
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRE/2018/17 Distr.: General 6 February 2018 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationTransposition of GTR15 (WLTP) into EU Legislation and UN Regulations
Informal document No. GRPE-72-18 (72 nd GRPE, 11-15 January 2016, agenda item 3(b)) Transposition of GTR15 (WLTP) into EU Legislation and UN Regulations 72 nd GRPE January 2016 Submitted by the expert
More informationConduct on-road training for motorcycle riders
Page 1 of 5 Conduct on-road training for motorcycle riders Level 5 Credits 10 Purpose This unit standard is for licensed motorcycle riding instructors who wish to conduct on-road motorcycle training. People
More informationHandbook 15. Issue 5. Duties of the machine controller (MC) and ontrack plant operator. GERT8000-HB15 Rule Book
GERT8000-HB15 Rule Book Duties of the machine controller (MC) and ontrack plant operator Handbook 15 Issue 5 September 2017 Comes into force 02 December 2017 Published by: RSSB The authoritative version
More informationM&EE Networking Group
Published to RSSB Standards Catalogue Web page on 05/12/2015 COP0008 Issue 6 August 2015 Code of Practice for Tandem Lifting with Two Excavator Cranes M&EE Networking Group No COP0008 Published to RSSB
More informationLloyd s Register Type Approval System Test Specification Number GT04
Lloyd s Register Type Approval System Test Specification Number GT04 Gas Turbines Performance and test specifications for Gas Turbines to be used in Marine, Offshore and Industrial Applications 2004 Lloyd's
More informationRAILWAY GROUP STANDARD GO/RT3000 MASTER RULE BOOK
R A I L T R A C K Safety and Standards Directorate RAILWAY GROUP STANDARD GO/RT3000 MASTER RULE BOOK Railtrack, Safety and Standards Directorate Railtrack House DP01 Euston Square LONDON NW1 2EE 08/1999
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10924-1 Second edition 2016-04-01 Road vehicles Circuit breakers Part 1: Definitions and general test requirements Véhicules routiers Coupe-circuits Partie 1: Définitions et
More informationBallast Water Management Surveyor Guidance An outline of Maritime NZ requirements of Surveyors for the purposes of Ballast Water Management
Ballast Water Management Surveyor Guidance An outline of Maritime NZ requirements of Surveyors for the purposes of Ballast Water Management Ballast water management surveyor guidance Page 1 of 9 Ballast
More information12042/16 MGT/NC/ra DGE 2
Council of the European Union Brussels, 12 October 2016 (OR. en) Interinstitutional File: 2016/0258 (NLE) 12042/16 TRANS 335 LEGISLATIVE ACTS AND OTHER INSTRUMTS Subject: COUNCIL DECISION on the position
More informationEU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL
This document contains an EU proposal for a legal text on an annex on motor vehicles and equipment and parts thereof to the Trade in Goods chapter in the Trade Part of a possible modernised EU-Mexico Association
More informationCALL FOR APPLICATIONS FOR THE SELECTION OF MEMBERS OF THE TACHOGRAPH FORUM
EUROPEAN COMMISSION DIRECTORATE-GENERAL FOR MOBILITY AND TRANSPORT Directorate D - Logistics, maritime & land transport and passenger rights D.3 Road Transport Brussels, 29 January 2016 ARES (2015) 6558037
More informationModernising the Great Western railway
Report by the Comptroller and Auditor General Department for Transport and Network Rail Modernising the Great Western railway HC 781 SESSION 2016-17 9 NOVEMBER 2016 4 Key facts Modernising the Great Western
More informationGO/GN3637. Guidance on Defective On-Train Equipment. Rail Industry Guidance Note for GO/RT3437. Published by: RSSB
GN Published by: Copyright 2015 Rail Safety and Standards Board Limited GO/GN3637 Guidance on Defective On-Train Equipment Issue Two September 2015 Rail Industry Guidance Note for GO/RT3437 Issue record
More informationEUROPEAN UNION AGENCY FOR RAILWAYS Annex 1 006REC1025 V 1.0
Annex 1: Amendments to the technical specification for interoperability relating to the rolling stock locomotives and passenger rolling stock subsystem of the rail system in the European Union (Annex to
More informationOperation of Trams and Light Rail or Metro Vehicles Over Railtrack Controlled Infrastructure
Operation of Trams and Light Rail or Metro Vehicles Over Railtrack Controlled Infrastructure Synopsis This document provides guidance for Train Operators, Station Operators and Railtrack Line in a situation
More informationEU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR CHANGES
EU TOY DIRECTIVE 2009/48/EC: OVERVIEW - REGULATORY CONTEXT AND MAJOR The EU Toy Directive was revised in order to take into account the new technological developments and increasing child safety requirements.
More informationInteroperability TSIs applicable to Railway vehicles. Innotrans, September, 2010
Interoperability TSIs applicable to Railway vehicles Innotrans, 21-24 September, 2010 1. Purpose of the presentation 2. Geographical scope (Directives and TSIs) 3. Technical scope of TSIs 4. TSIs applicable
More information(submitted by the Dutch delegation)
EUROPEAN COMMISSION ENTERPRISE DIRECTORATE-GENERAL Single market, regulatory environment, industries under vertical legislation Automotive industry Motor Vehicles Working Group (MVWG) Brussels, 27 October
More informationRequirements for the Application of Standard Vehicle Gauges
Synopsis This document defines standard vehicle gauges and the associated application rules for rolling stock and for infrastructure. [This document contains one or more pages which contain colour] Copyright
More informationCouncil of the European Union Brussels, 18 July 2014 (OR. en)
Council of the European Union Brussels, 18 July 2014 (OR. en) 11932/14 ADD 1 TRANS 367 COVER NOTE From: European Commission date of receipt: 9 July 2014 To: General Secretariat of the Council No. Cion
More information185-40(02) (Head Restraints)
LVVTA Low Volume Vehicle Standard 185-40(02) (Head Restraints) Page 1 of 10 Low Volume Vehicle Technical Association Incorporated Low Volume Vehicle Standard 185-40(02) (Head Restraints) This Low Volume
More informationANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions
ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS Article 1 General Provisions 1. This Annex shall apply to motor vehicles in UNECE vehicle regulations' category M1 as well as parts and equipment regulated
More informationECE/TRANS/180/Add.6/Amend.1/Appendix 1
6 April 2011 Global registry Created on 18 November 2004, pursuant to Article 6 of the Agreement concerning the establishing of global technical regulations for wheeled vehicles, equipment and parts which
More informationResearch Brief. Simulation and verification of results from 125mph current collection modelling for two pantographs. T841 - January 2011.
Research Brief Simulation and verification of results from 125mph current collection modelling for two pantographs Overview On behalf of the Vehicle / Train Energy System Interface Committee (V/TE SIC),
More informationElectric vehicle charging system
TECHNICAL REFERENCE (ICS 43.120) TECHNICAL REFERENCE FOR Electric vehicle charging system Published by SPRING Singapore 2 Bukit Merah Central Singapore 159835 SPRING Singapore Website: www.spring.gov.sg
More information1 YORK REGION TRANSIT EXTENSION OF EXISTING DIAL-A-RIDE PILOT PROJECT AND STOCK TRANSPORTATION SCHOOL BUS CONTRACTS
1 YORK REGION TRANSIT EXTENSION OF EXISTING DIAL-A-RIDE PILOT PROJECT AND STOCK TRANSPORTATION SCHOOL BUS CONTRACTS The Transit Committee recommends the adoption of the recommendations contained in the
More informationGuidance on the Energy TSI
Rail Industry Guidance on the Energy TSI Synopsis This document gives guidance on interpreting the requirements of the Energy Technical Specification for Interoperability 2014 (), Commission Regulation
More informationLand Transport Rule Omnibus Amendment 2013
DRAFT Omnibus Amendment 2013 Rule 10009 This is the public consultation (yellow) draft of Land Transport Rule: Omnibus Amendment 2013. It contains proposals for making minor technical or other amendments
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/GRSP/2017/27 Distr.: General 22 September 2017 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationCUSC Panel 30 September 2016 John Martin National Grid
CMP251 Removing the error margin in the cap on total TNUoS recovered by generation and introducing a new charging element to TNUoS to ensure compliance with European Commission Regulation 838/2010 Place
More informationDraft Agenda. Item Subject Responsible Time. 4. GAS INFORMATION SERVICES PROJECT IMO 10 min. 5. OPTIONS FOR GAS BULLETIN BOARD SYSTEM IMO 15 min
Gas Advisory Board Draft Agenda Meeting No. 1 Location: Parmelia Hilton, Swan B Room 14 Mill Street, Perth WA 6000 Date: 20 December 2011 Time: 11:15am 12:15pm Item Subject Responsible Time 1. WELCOME
More informationBEFORE THE PUBLIC UTILITIES COMMISSION OF THE STATE OF CALIFORNIA
BEFORE THE PUBLIC UTILITIES COMMISSION OF THE STATE OF CALIFORNIA Order Instituting Rulemaking Concerning Energy Efficiency Rolling Portfolios, Policies, Programs, Evaluation, and Related Issues. R.13-11-005
More informationParking Control Bylaw 2014
Parking Control Bylaw 2014 1 Thames-Coromandel District Council - Parking Control Bylaw 2014 1. TITLE 1.1. This Bylaw is the Thames-Coromandel District Council Parking Control Bylaw 2014. 2. EXPLANATORY
More informationThe Commonwealth of Massachusetts
The Commonwealth of Massachusetts DEPARTMENT OF PUBLIC UTILITIES D.P.U. 16-64-H November 6, 2017 Investigation of the Department of Public Utilities, on its own Motion, Commencing a Rulemaking pursuant
More informationEconomic and Social Council
United Nations Economic and Social Council ECE/TRANS/WP.29/205/83 Distr.: General 24 August 205 Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization
More informationTanks: Informal Working Group on the inspection and certification of tanks
Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods Joint Meeting of the RID Committee of Experts and the Working Party on the Transport of Dangerous
More informationWhereas pursuant to Article 4b of Regulation (EEC) No 3164/76, as inserted by Regulation (EEC) No 1841/88, the Council must adopt the measures
Council Regulation (EEC) No 881/92 of 26 March 1992 on access to the market in the carriage of goods by road within the Community to or from the territory of a Member State or passing across the territory
More information