James G. Murphy Co. Commercial & Industrial Auctioneers PUBLIC AUCTION. By Order Secured Creditor

Transcription

1 James G. Murphy Co. Commercial & Industrial Auctioneers PUBLIC AUCTION By Order Secured Creditor (2) Complete Mills w/sawmill Equipment, Rolling Stock, Each Sold as 1 Lot 12 NOON - THURSDAY - JULY 12 Preview at each location by Appointment ONLY Auction will be held at th St, Suite 2300, Denver, CO Cat 980G, Montrose Nicholson A5B, Saratoga Road Montrose, CO To be Sold as 1 Lot 507 E Bridge Ave Saratoga, WY To be Sold as 1 Lot Bid live or bid online with MurphyLIVE! For an appointment to preview each site or for additional information on the equipment go to murphyauction.com Phone

2 Montrose, CO - to be Sold as 1 Lot Road, Montrose, CO Debarker System #1 - Large Log SALEM MARK II 35 ring debarker w/alligator feed chain, press rolls, hydraulic system & controls, operators control booth, drives 42 5-strand log infeed transfer w/log stop & loader, 132 chain, drive 35 2-strand infeed log haul w/hydraulic kickers, 132 chain, drive 40 2-strand outfeed log trough from debarker w/5-arm kicker, 132 chain, drive 40 2-strand infeed log trough to chop saw w/132 chain, drive WEG VECTRUE inverter frequency drive unit L&M 84 circular log cutoff saw w/log hold downs & clamp, 84 inserted tooth blade, log stops, operator control booth & controls, hydraulic system, 200 hp 8 2-strand log outfeed trough from cutoff saw w/132 chain, drive MDI TWA-2000-HD 42 x42 surround type log metal detector w/36 x8 through belt conveyor & controls 10 outfeed log haul w/cross kickers, 132 chain, drive Debarker System #2 - Small Log 1985 VALON KONE ring debarker w/infeed & outfeed centering trough, press rolls, hydraulic system, drives & controls, s/n: R strand log infeed transfer, split deck drive, hydraulic log singulator & loader, 132 chain, drive 50 infeed log haul to debarker w/132 chain w/flights, drive 36 x45 outfeed debarker belt conveyor w/hydraulic log sweeps, centering cover, drive & controls 8 8-strand log transfer to cutoff saw w/hydraulic log kickers w/82 chain 36 x45 infeed belt conveyor to cutoff saw w/drive USNR 72 swing type cutoff saw w/log stops & clamps, 72 inserted tooth blade, hydraulic system, 100 hp drive & controls, w/8 x8 all steel control booth 16 outfeed log trough w/110 chain, drive 36 x16 outfeed log belt conveyor w/drive 36 x55 incline log belt conveyor to sawmill w/hydraulic kickers MDI TWA x36 surround type log metal detector w/controls Debarker Area Waste Wood Systems 100 bark waste conveyor under debarker & cutoff saw w/110 chain & flights 35 bark waste incline conveyor w/110 chain, S-drive, drive & controls 30 2-strand lily pad waste conveyor w/110 chain, S-drive, drive & controls 22 2-strand sawdust waste conveyor w/78 chain, drive & controls 100 bark waste conveyor to yard w/s-drive, chain & flights, drive 40 bark waste conveyor under infeed area w/480 chain, drive & controls 20 incline bark waste conveyor w/110 chain, drive & controls 20 secondary bark waste incline conveyor w/106 chain, drive & controls PEERLESS 30 unit truck loading & storage bin w/hydraulic gates & pump Sawmill - Large Log Side TIMBER JACK hydraulic heavy duty log turner w/hydraulics, controls USNR 7 slant high strain band head rig s/n: 3259, w/inovec scanning system (New 2005), 36 belt type travel bed, adjustable guide system, TEMPOSONIC set works, hydraulic system, 300 hp motor & controls CM&E 34RH pre-slabber w/conical head system, TEMPOSONIC set works, hydraulic system, 200 hp drive, s/n: 2657 USNR log boss 36 2-block slant automatic set computerized carriage w/temposonic set works, rails & pantograph, controls, s/n: INDUSTRIAL ELECTRIC 250 hp dc dual cable carriage drive w/inovec digital controller & IE controls, drive cooling system 8 3-strand incline log lift to head rig area w/124 chain & lift buckets, drive 65 4-strand infeed log transfer to head rig w/78 chain, log stop & loader 36 x30 head rig outfeed rollcase w/board kickers, drop gate, drive & controls 36 3-section, 4 & 5-strand outfeed lumber transfer to resaw w/pin stops, 78 chain, (3) diverters, drives & controls 32 4-strand outfeed lumber transfer to edger drop out w/78 chain Sawmill - Small Log Side SWECAN twin vertical small log head rig system including 70 infeed & outfeed, SHARP chain feed (New 2005), 10 log turning rolls, press rolls, INOVEC Dyna Vision computerized scanning w/surround optimization system (New 2005), CM&E Twin Model 34 RH & LH canter heads, w/ TEMPOSONIC set works, (2) 125 hp drives, s/n s: 2657RH & 2657LH, SWECAN 55 twin vertical high strain band head rig, (2) 200 hp drives, s/n s: BE-002L & BE002R, 36 twin flitch clearing rolls, 20 5-strand lumber landing table transfer w/78 camel back chain, hydraulic systems, drives & controls, substructure to the ground 26 3-strand log transfer from debarker w/78 chain, drive & controls 22 3-strand log transfer w/78 chain & lift buckets, drive & controls 36 log haul w/log sweep, 110 chain, drive motor & controls 30 4-strand infeed log deck transfer to head rig w/124 chain, drive, controls USNR 10 4 step log step feeder w/drive & controls 24 x40 outfeed belt conveyor to resaw w/drive & controls 32 outfeed center cant transfer w/pneumatic sweep kicker, drive Twin 24 x40 2-section outfeed belt conveyor w/drives & controls 24 x30 return belt conveyor w/drive & controls 24 2-section, 4-strand infeed lumber transfer to resaw w/camelback chain CETEC 6 horizontal high strain twin band resaw system including Micro- Select electronic controls, 36 x12 infeed rollcase w/twin 42 4-strand side feed transfers, 42 4-arm jump transfers w/#100 roller chain, 36 through & outfeed rollcase w/press rolls, 250 hp & 150 hp drives, operators booth 36 x32 incline belt conveyor from head rig to resaw lumber landing table 10 4-strand outfeed lumber landing table transfer w/78 camel back chain 8 x10 slat bed resaw outfeed landing table transfer w/drive & controls

3 Montrose, CO - to be Sold as 1 Lot 10 7-strand speed up transfer w/81x chain, drive & controls 36 x30 incline belt conveyor to edger w/6-arm drop gate, drive & controls 36 x50 incline belt conveyor to edger w/6-arm drop gate, drive & controls 36 x20 incline return belt conveyor to resaw w/drive & controls 36 x30 incline return belt conveyor to resaw w/drive & controls 32 x30 incline return belt conveyor from edger area to resaw 70 6-strand waste wood transfer under resaw sorting area w/78 chain 26 4-strand decline lumber transfer to gang edger w/78 chain, drive 4 5-strand lumber landing table transfer w/78 camel back chain, drive 40 2-section, 4-strand cant transfer to gang edger w/6 even-ending chain, 78 chain, drive & controls USNR 4-SBA-60 6 x60 combination gang edger, 60 x6 infeed rollcase w/straight edger & jump chains, press rolls, splined arbor, 4 x60 outfeed rollcase, lasers, babbitt guides, auto guide lubrication unit, 400 hp, s/n: strand outfeed landing table transfer w/78 camel back chain 36 6-strand lumber landing table transfer to optimizer edger w/78 chain 24 4-strand lumber transfer w/78 chain, drive & controls 5 2-section bar type lumber unscrambler w/drive & controls COE 2001 optimizing 2 x36 board edger system including 12 6-strand infeed lumber transfer w/even-ending rolls, 4-arm lumber hold back fingers, flitch feeder, 5 4-strand infeed belt transfer w/flitch stops, COE D-TEC 2000 optimizing scanner system, s/n: W w/10 4-strand feed transfer, flitch feeder & clamps, TEMPOSONIC set works, COE 2 x36 6 saw board edger w/16 center chain infeed & press rolls, TEMPOSONIC set works, splined arbor, babbitt guides, 250 hp drive, 36 x12 outfeed belt conveyor w/edge pickers, hydraulic system, auto guide lubrication unit, computerized controls, s/n: W strand edger outfeed lumber landing table transfer w/78 camel back chain, drive & controls 12 x50 belt conveyor w/drive & controls USNR Sweed lumber puller w/24 rubber coated rolls, drive & controls 18 x22 incline belt conveyor to circle resaw w/drive & controls 12 4-strand lumber landing table transfer w/78 camel back chain, I-M circle resaw w/16 x8 infeed rollcase, lumber straight edge, 16 outfeed picking table, rollcase, 25 hp drive & controls 50 3-section, 4-strand lumber drop out transfer w/78 chain, drive & controls 28 5-strand lumber transfer to unscrambler w/78 chain, drive & controls 6 4-section bar type lumber unscrambler w/78 chain & flights 12 5-strand lug type lumber transfer to trimmer w/81x chain & lugs IRVINGTON-MOORE 16 LH pass, 20 motorized gang trimmer w/24 6-strand through lug lumber transfer, even-ending rolls, 7-1/2 hp, s/n: strand green chain w/78 chain, drive & controls (20) 48 x24 unit rollout-sections w/6 x42 rolls 6 3-section bar type lumber unscrambler w/188 chain & flights, s/n: LD strand unit re-entry transfer w/78 chain, drive & controls 54 x60 unit re-entry rollcase w/6 x54 rolls, drive & controls 14 6-strand lumber infeed transfer to water fall unscrambler/loader for stacker w/78 chain, drive & controls 10 6-strand water fall unscrambler/loader w/78 chain & lugs, drive & controls 12 6-strand infeed lumber transfer w/12 x54 even-ending rollcase, 81X chain, drive & controls LUNDEN 16 automatic lumber sticker stacker consisting of 16 6-strand infeed loading transfer, (9) loading-arms, lumber stops, even-ending chain, let down hoist, automatic sticker infeed transfer w/stick feeder & placer, drives & controls, s/n: 617 (25) 36 x8 open forklift all steel sticker racks w/sticker (25) 48 x8 sticker forklift all steel racks w/closed end & backs w/sticker 36 4-strand green chain w/78 chain, drive & controls 18 x35 belt conveyor to stud stacker #1 w/drive & controls 18 x55 belt conveyor to stud stacker #2 w/drive & controls 14 4-strand lumber landing table transfer to stud stacker w/78 chain 10 2-section bar type lumber unscrambler w/81x chain & flights 60 3 roll even-ending rollcase w/12 x60 canted rolls, drive & controls CON-VEY KEYSTONE 8 automatic lumber stacker w/16 2-section, 2 & 3-strand infeed lumber transfer to stacker, dual placer-arms, auto stick placers, hydraulic let down hoist, 20 2-strand unit outfeed transfer w/124 chain, drives & controls s/n: strand lumber landing table transfer w/78 camel back chain 24 3-strand infeed lumber transfer w/78 chain, drive & controls Overhead twin end trim unit w/5 hp arbor motors, steel frame to transfer CON-VEY KEYSTONE 10 automatic lumber stacker w/16 2-section, 2 & 3-strand infeed lumber transfer to stacker, dual placer-arms, auto stick placers, hydraulic let down hoist, 20 2-strand unit outfeed transfer 12 x45 return lumber belt conveyor from stud stackers w/drive & controls Spare electric motors & gear motors, spare mill parts & supplies, mill & roller chain, mill chain sprockets & V-belt pulleys ZEKS Genesis 600 LGS 300 psi air dryer system w/cooler SIEMENS 75 kva transformer by stacker

4 Montrose, CO - to be Sold as 1 Lot Sawmill Waste Wood System SYNCRO-COIL 24 x32 vibratory conveyor under trim saw w/drive 24 x100 sawdust waste belt conveyor from trim saw w/drive & controls 30 waste conveyor under head rig w/110 chain, drive & controls 18 x45 1st-section waste belt conveyor from head rig w/return 18 x45 2nd-section waste belt conveyor from head rig w/drive & controls LINCOLN 400 amp electric-arm welder w/leads 40 waste conveyor under twin resaw w/110 chain, drive & controls SYNCRO-COIL 24 x110 main mill vibratory waste conveyor w/sawdust dropout, 5 fiberglass metal detector-section, drive & controls MDI metal detector unit w/coil & controls 95, 70 waste conveyors w/110 chain & controls MILLER 500 amp electric arc welder, s/n: H x20 waste belt conveyor under circle resaw w/drive & controls 16 7-strand waste trash transfer by chipper area w/78 chain, drive BLACK & CLAWSON chip pack w/5 x8 double deck chip screen, 5 cyclone, drives & controls, s/n: (replaced screen 2008) KOCKUMS 54 8 knife horizontal feed top discharge waste wood chipper w/300 hp drive motor & controls, s/n: D (Note: replaced 8 knife chipper disc 2008) 85 incline sawdust waste wood conveyor to truck bin w/110 chain & flights 95 incline chip waste wood conveyor to truck bin w/110 chain & flights PEERLESS 42-unit, 14 unit truck loading & storage bins for chips Filing & Grinding Room Equipment (4) ARMSTRONG #4 LH & RH bandsaw sharpener w/clamps & stands, s/n s: 13489, 5534, 3982 ARMSTRONG #5 stretcher roll w/top & bottom anvils, bench & 2 welding clamp, s/n: ARMSTRONG #4 stretcher roll w/top & bottom anvils, bench & 2 welding clamp, s/n: ARMSTRONG #2 circle saw sharpener ARMSTRONG 3450-C60 tension gauge grinder (3) hoe bandsaw guide grinders WRIGHT TALON DS-1 carbide circle saw side grinder WRIGHT W-150 HDB carbide circle saw top & face grinder ARMSTRONG #3-60C circle saw stretcher roll w/tip station, s/n: ACME short model circle saw sharpener, s/n: 0129 (2) IMW 240 babbitt guide grinders YORK chain saw sharpener ACME tall model circle saw sharpener, s/n: 4951 VOLLMER CHC/025 circle saw top & face grinder, s/n: 3340 PRECISION GK-440 tub knife grinder, s/n: PAC-738 HANCHETT size 20 bandsaw shear WESTERN MACHINERY 875E finger head joint knife grinder, s/n: DONALDSON Torit UMA-250 dust collection system NEWMAN G-132 traveling bed babbitt grinder, s/n: Filing room tools & supplies including: swedges, shapers, grinders, 4 x12 aluminum straight edge, anvils, hand tools, electric & pneumatic tools, large quantity of saw blades, grinding wheels, saw bits, guides, knives, RONDAMAT grinder, ARMSTRONG grinder Compressor Room SULLAIR LS-25S 300 hp rotary screw air cooled air compressor w/cooler, controls, s/n: SULLAIR TS hp rotary screw air cooled air compressor w/cooler, controls, s/n: AIRTEK CT-1200 refrigerated air dryer unit w/controls ZEKS Genesis 800 LCG air dryer unit w/controls 24 x5 vertical air receiver tank Maintenance Shop Area CLAUSING 20 floor type drill press w/vise COLL CRIMP II T hydraulic hose crimping machine HYD-MECH S-20 Series II metal cutting bandsaw w/roll table I-M 20 ton arbor press w/hydraulic pump LAGUN FTV-2 adjustable speed milling machine w/vise SUMMIT engine lathe w/20 swing, 3 & 4-jaw chucks, 80 bed, power feed, tail stop & tooling, s/n: 4111 CLAUSING-METOSA engine lathe w/28 swing, 3-jaw chuck, 72 bed, power feed, tail stop & tooling MILLER Big 40G 250 amp portable arc welder w/diesel engine MILLER Bobcat 225G 225 amp portable arc welder/generator w/roll cart RIDGID 535 pipe threader w/dies & roll cart (3) MAX 10 ton hydraulic floor jacks. (3) ESAB Migmaster amp mig arc welders MILL-POWER 24 x40 vibratory conveyor w/drive installed VICTOR DC-2400 radial torch set w/auto speed controls & cutting table MILLER 251 Millermatic wire feed arc welder SAFETY-KLEEN solvent tank/parts cleaner (5) VICTOR torch sets w/carts Large quantity of mill parts & supplies including: machine parts, air & hydraulic cylinders, bearings, roller & mill chain, DC drive, electrical boxes, rolls of flat belting, hydraulic hose & fittings, steel racks & steel, welding supplies nuts & bolts, steel storage cabinets, pipe fittings, electrical supply room consisting of electrical fittings, wire, light & light bulbs, switches, starters, electrical controls, fuses, bench grinder, heaters, conduit rack & conduit, disc grinders, porta powers, bench grinders, vises, small steel shop tables, electric & pneumatic hand tools, grease pumps & oil lube equipment, space heaters, ladders, hose reels, steel saw horses, hydraulic jacks, anvils, hand trucks, hand tools, office furnishings Additional photos & information on our website: murphyauction.com

5 Montrose, CO - to be Sold as 1 Lot Boiler & Kiln Area (2) MOORE OREGON 105 double track gas/diesel fired dry kilns w/multi zone controls, in-out & through track (New 2006 COE kiln controls & control room), 1997 CLEAVER/BROOKS CB psi gas/diesel fired package boiler w/water system, RANSOME gas vaporizer unit, spare parts, supplies & controls, s/n: OL (176) 8 x8 all steel tubing & channel kiln carts (27) 4 x8 all steel channel & I-beam kiln carts Planer Area 20 5-strand unit infeed transfer w/81x chain, drive & controls 60 5-arm unit breakdown hoist w/drive & controls 8 x24 sticker reclaim belt conveyor w/drive & controls 16 2-section, 5-strand infeed lumber transfer w/lumber hold backs, overhead press wheels, 81X chain, board feeder, drive & controls 12 6-strand lug type lumber transfer w/81x chain & lugs, drive & controls WAGNER 750 moisture detector system w/(4) scanning panels & controls 24 x20 lumber drop-out belt conveyor w/drive & controls 6 6-strand drop-out landing table transfer w/78 camel back chain 24 4-strand planer infeed lumber transfer w/36 5-arm drop-out, 81X chain WOODS 415M2 6 x15 14 knife planer w/profile, 100 hp top cylinder, 60 hp bottom cylinder, 35 hp & 40 hp side head, s/n: 32566, OREGON dual pineapple feed table, hydraulic press rolls SALEM 36 x60 planer lumber slowdown belt w/drive & controls Planer shavings 200 hp 60 blower w/blow pipe & controls 8 3-strand outfeed lumber landing table transfer w/78 camel back chain 14 3-strand planer lumber transfer w/78 roll-top chain, drive & controls IRVINGTON 16 motorized trimmer w/8-strand lugged feed lumber transfer w/even ending rolls, drives & controls WORTHINGTON 25 hp rotary air compressor w/drive, 32 x8 horizontal air receiver tank & controls 60 5-strand planer green chain transfer w/78 chain, drive & controls (12) 4 x8 all steel lumber carts 7 4-strand incline lumber transfer w/81x chain, drive & controls GILLINGHAM-BEST 3-arm automatic lumber stacker w/4-strand thru transfer, 3 stacking & let down-arms, even ending chain, drives & controls 16 3-strand unit outfeed transfer w/81x chain, drive & controls 12 4-strand unit infeed transfer to package system w/81x chain SIGNODE unit package system including 60 x45 infeed unit rollcase, SIGNODE hydraulic top, side & end squeeze unit w/pneumatic bander, 60 x24 outfeed unit rollcase, drives, hydraulic system & controls 20 3-strand unit outfeed transfer w/81x chain, drives & controls 50 2-strand unit sorting transfer by package are w/81x chain, drive & controls (3) SIGNODE banding carts w/banding tools SULLAIR rotary screw air cooled air compressor, 75 hp, s/n: SULLAIR SRH 630 refrigerated air dryer unit w/controls, s/n: 3-D x40 under trimmer belt conveyor w/drive & controls 18 x50 incline truck landing belt conveyor w/drive & controls Precision End Trim Line 60 x30 infeed unit rollcase w/drive & controls 48 2-arm unit breakdown hoist w/drive & controls 12 x24 2-section infeed belt conveyor from planer w/drive & controls 36 4-strand lumber landing table transfer w/78 camel back chain 48 2-section bar type lumber unscrambler w/81x chain & flights LSI 2 saw precision end trim (P.E.T.) system consisting of 8 2-section, 2-strand loading transfer w/188 & 78 chain, even ending rolls, lumber auto board space roll system w/press rolls, 2-saw trimmer w/7-1/2 hp arbor motors, 2-strand through lug transfer, press rolls, end & grade stamp units, drive & controls 24 2-section, 2-strand lumber pet outfeed transfer w/78 chain LSI automatic hydraulic stud stacker w/2-arm loader & let down hoist w/hydraulic system, drives & programmable controls 10 x42, 10 x14 waste wood belt conveyors w/drive & controls SIGNODE unit packaging system including 60 x32 unit infeed rollcase to package unit, SIGNODE hydraulic package unit w/top, side & end squeeze, SIGNODE automatic feed & strap unit, hydraulic unit & controls, 60 x20 outfeed unit, rollcase 24 2-strand unit outfeed transfer w/78 chain, drive & controls AJAX 25 hp tank mounted air compressor by pet area PEERLESS 62 truck loading & storage bin w/hydraulic gates, pump unit Bid live or bid online with MurphyLIVE!

6 Montrose, CO - to be Sold as 1 Lot Planer Grinding Room HANCHETT traveling head knife grinder w/auto lube system & controls, s/n: 147 YATES AMERICAN side head grinder w/#2 taper spindles & controls, s/n: LINCOLN Wire-Matic 255 wire feed arc welder LINCOLN R3R amp arc welder VICTOR torch set w/cart JET 10 bench grinder w/stand Spare mill supplies consisting of planer side heads, planer parts & supplies, bearings, mill & roller chain, V-belts, V-belt sheaves, sprockets & motors Hand, power & pneumatic tools Finger Joint Equipment PAUL optimized cutoff system including: (2) optimized chop saws, VISION SYSTEM colored eye scanner, auto feeder, 3-strand x chain infeed w/drive, 3-arm breakdown hoist, 10 cross transfer w/electrics, s/n: (saw); 0515(Vision) SULLAIR 10-40AC 40 hp rotary screw air compressor w/tank, s/n: B WESTERN INDUSTRIAL SYSTEM 2 x8 finger joint line w/short block assembly attachment, 84 x16 walking floor feed bin, dump bin feed unit, 24 infeed belt, profile-section w/(2) 5 hp trim saw units, (2) 7-1/2 hp score heads, (2) 20 hp cutter heads, even ending & lug loader unit, ABQUIP glue system, auto corner feeder, assembly press-section, 20 flying cutoff saw, CUTLER/HAMMER Panelmate touch screen, programmable controls, hydraulic units, spare finger jointer heads & drives, s/n: FJ Heavy Equipment Shop Area LINCOLN R3R-300 electric welder w/steel stand REZNOR waste oil burner system JET 8 bench grinder w/stand MAKITA abrasive cutoff saw w/stand INGERSOLL RAND T hp tank mounted air compressor SWEED transmission jack 12 jib boom on wheel w/2 ton chain hoist VICTOR torch set w/cart HOTSY steam cleaner SAFETY-CLEAN solvent tank LINCOLN pneumatic grease pump DAYTON fleet battery charger ESTERLY 10 ton floor jack MILWAUKEE abrasive cutoff saw CRAFTSMAN 15 floor mounted drill press, 1 hp LAWSON parts bins w/spare parts, nuts, bolts, fittings, etc. Small shop equipment & tools consisting of hydraulic jacks, pneumatic tools, electric tools, lifting chains & straps, ladders, workbenches & tables, vises, barrel carts & hand tools Large quantities of spare parts & supplies consisting of hydraulic hose & fittings, forklift parts, loader parts, filters, truck tires, forklift tires, oil & lube supplies & truck wheels

7 Montrose, CO - to be Sold as 1 Lot Rolling Stock & Related Equipment DART KW 120 log stacker w/detroit diesel engine, single pass log forksnon operational, pneumatic tires, EROPS, Hrs: 6,152, s/n: DART KW 120 log stacker w/detroit diesel engine, single pass log forks, pneumatic tires, EROPS, Hrs: 6,163, s/n: DART KW 80 log stacker w/cummins diesel engine, single pass log forks, pneumatic tires, EROPS, Hrs: 5,380 CATERPILLAR 980G wheel loader w/diesel engine, MEDFORD log forks, pneumatic tires, EROPS & GP slide in bucket, Hrs: 17,102, s/n: 2KR03574 CATERPILLAR 980G wheel loader w/diesel engine, MEDFORD log forks, pneumatic tires, EROPS & GP slide in bucket, Hrs: 35,329, s/n: 2KR00416 (FIRE DAMAGE) CATERPILLAR 966D wheel loader w/diesel engine, MEDFORD log forks, pneumatic tires, EROPS, Hrs: 17,851, s/n: 99Y02681 CATERPILLAR 966D wheel loader w/diesel engine, MEDFORD log forks, slip on bucket, pneumatic tires, EROPS, Hrs: 19,310, s/n: 99Y03046 CATERPILLAR 966C wheel loader w/diesel engine, FLECO log forks & slip on bucket, pneumatic tires, EROPS, s/n: 76J6722 JOHN DEERE 690-ELC track mounted log loader w/diesel engine, YOUNG boom & grapple, EROPS, Hrs: 15,521, s/n: DW690EL CASE 9030-B track mounted log loader w/diesel engine, PIERCE boom & hydraulic swivel grapple, EROPS, Hrs: 15,351, s/n: DAC CASE 9040-TK track mounted log loader w/diesel engine, PIERCE boom & hydraulic swivel grapple, EROPS, right track, s/n: AC KOMATSU WA350 rubber tire loader, quick attachment w/forks & bucket, Hrs: 20,632, s/n: W JOHN DEERE 648G rubber tire log skidder, rear grapple & winch, Hrs: 1,366, s/n: DW648GX CLARK Bobcat 722 skid steer loader, gas, Hrs: 3,612, s/n: 4982-M CATERPILLAR 426 backhoe loader w/diesel engine, GP front bucket, 18 backhoe bucket, 2 wheel drive, pneumatic tires, outriggers, Hrs: 7,117, s/n: 7BC02072 CATERPILLAR 966C rubber tire wheel loader, GP bucket, s/n: 6J3221 CATERPILLAR D8K crawler dozer w/diesel engine, tilt, angle blade, 2 barrel rear ripper, OROPS, Hrs: 2,200, s/n: 77V7170 CATERPILLAR D6D crawler tractor w/diesel engine, tilt, angle blade, HYSTER winch, OROPS, Hrs: 990, s/n: 4X5029 JOHN DEERE 772BH road grader w/diesel engine, 16 blade, slope sheet, front & rear ripper, Hrs: 2,989, s/n: JOHN DEERE 772A road grader w/diesel engine, 14 blade, snow wing, slope sheet, EROPS, s/n: 11068T JOHN DEERE 770A road grader w/diesel engine, 14 blade, EROPS, s/n: HYSTER H250H 25,000 lb forklift w/diesel engine, side shift, pneumatic tires, lumber forks, drops, Hrs: 2,997, s/n: C007P1890X CATERPILLAR V ,000 lb forklift w/diesel engine, side shift & swivel, pneumatic tires, lumber forks, EROPS, Hrs: 1,477, s/n: 21V88 CATERPILLAR V-200B 20,000 lb forklift w/diesel engine, side shift & swivel, pneumatic tires, lumber forks, EROPS, Hrs: 36,897 CATERPILLAR V-180B 18,000 lb forklift w/diesel engine, side shift & swivel, pneumatic tires, EROPS, lumber forks, Hrs: 53,400, s/n: 68Y00978 HYSTER H155XL 15,500 lb forklift w/diesel engine, side shift, lumber forks, pneumatic tires, EROPS, Hrs: 2,098, s/n: F006A07467N HYSTER H155XL 15,500 lb forklift w/diesel engine, side shift, lumber forks, pneumatic tires, EROPS, Hrs: 4,399, s/n: F006A02771J HYSTER H155Xl 15,500 lb forklift w/diesel engine, side shift, lumber forks, pneumatic tires, EROPS, Hrs: 9,997, s/n: F006D03561T HYSTER P150B 15,000 lb rough terrain forklift w/diesel engine, side shift, pneumatic tires, EROPS, lumber forks, Hrs: 9,410, s/n: C007P04307D HYSTER H135XL2 13,500 lb forklift w/diesel engine, side shift, lumber forks, pneumatic tires, EROPS, Hrs: 1,913, s/n: F006V02067Z HYSTER H135XL2 13,500 lb forklift w/diesel engine, side shift, lumber forks, pneumatic tires, EROPS, Hrs: 7,411, s/n: F006V02016Z INGERSOLL-RAND VR-90 9,000 lb, 40 reach forklift, Hrs: 3,420, s/n: 5171-S KOMATSU FG25G 5,000 lb pneumatic forklift, Hrs: 1,040, s/n: A CONDOR RT48A rough terrain manlift w/gas engine, Hrs: 3,064, s/n: P BANTAM S ton hydraulic rough terrain crane w/diesel engine, outriggers, EROPS, s/n: KENWORTH W-900 T/A chip dump truck w/diesel engine, Miles:405,181, s/n: S INTERNATIONAL Paystar 5000 T/A water truck w/diesel engine, 4,000 gallon water tank & spray system, Miles:250,899, s/n: D3117GG KENWORTH W-900 T/A dump truck w/diesel engine, 10 yard dump box, s/n: S 1972 KENWORTH W axle hog fuel truck w/diesel engine, 30 yard steel hog fuel dump bed, Miles:19,188, s/n: FORD F-250 3/4 ton 4x4 crew cab pickup w/gas engine, auto transmission, air, tilt, cruise, Miles: 128,275, s/n: 1FTSW21578EA GMC 2500 HD 3/4 ton 4x4 crew cab pickup w/diesel engine, auto transmission, air, tilt, cruise, tool box & cab guard, s/n: 1GTHK23607F GMC SL1500 1/2 ton 4x4 club cab pickup w/gas engine, auto transmission, air, tilt, cruise, fuel tank & pump, s/n: 2GTEK19M7T FORD Ranger 1/2 ton 4x4 regular cab pickup w/gas engine, 4 spd transmission, air, tilt, cruise, bed rack, s/n: 1FTCR11X9MTA FORD F-250 Ranger 3/4 ton 4x4 club cab pickup w/gas engine, 4 spd transmission, fuel tank & pump, s/n: X26SKBH0594 FORD F axle flatbed truck w/gas engine, 8 steel flatbed, cab rack, s/n: F60KV OTTAWA COMMANDO 30 2-axle yard goat w/gas engine, EROPS, Miles:56,131, s/n: KENWORTH W923 T/A water fire truck, Hrs: 7,418, s/n: PETERBILT 375 T/A tractor, Miles:801,000, s/n: 1XP-BD99X-X KENWORTH T/A tractor, miles: 712,000 ATHEY-147-B street sweeper w/gas engine, air suction system, EROPS, Hrs: 8,168, s/n: 1A9D24DB6GR BIG TEX 170-DM axle dove tail flatbed trailer w/ramps, s/n: 16VCX1827Y1E FONTAIN TA-50-NGB 50 ton detachable gooseneck, 3-axle lowboy trailer w/honda 11 hp hydraulic pump unit, Lic:K133938, s/n: 4LF4S549T WILKENS approx. 45 live floor T/A trailer Custom material screening plant w/(2) LOCKWOOD belt load out conveyors w/2 axle carrier MAR-HOOK 10 ton trailer loader w/r&m cable hoist & controls CARDINAL 10 x70 above ground 60 ton load cell truck scales w/ CARDINAL digital computerized weighing system, electronic readout & EPSON ticket printer (2) 10,000 gallon above ground safety type fuel tanks ACE 6,000 gallon above ground double wall safety type fuel tank w/ BENNETT pump 1,000 gallon above ground double wall safety type fuel tank w/tokheim pump

8 Saratoga, WY - to be Sold as 1 Lot 507 E Bridge Ave, Saratoga, WY Debarker & Log Merchandising System PRENTICE 410-B hydraulic pad mounted heel boom loader w/log grapple, hydraulic system, electric drive & controls 1998 NICHOLSON A5-B RH 27 ring debarker w/infeed & outfeed press rolls, ring drive system, hydraulic system, controls, s/n: x7 debarker operators control booth for debarker area 40 6-strand log infeed split drive transfer w/log stop & loader, 132 chain, drive 60 infeed log trough w/480 chain, drive 50 debarker outfeed log trough w/5-arm over head sweep type log kicker 36 6-strand log transfer w/log stop & loader, 132 chain, drive 55 log trough to cutoff saw w/110 chain, drive 55 outfeed log trough w/132 chain, drive 40 outfeed log trough w/5-arm overhead sweep type log kicker, 110 chain 30 5-strand log transfer w/s-drive, 124 chain, drive 45 infeed log trough to gang bucking system w/rotary log kicker, log sweep to mill, 132 chain, drive MDI 42 x42 surround type metal detector w/36 x12 belt conveyor, fiberglass tub, MDI controls 5 saw gang block bucking system w/(5) 72 inserted tooth cutoff saws, 42 hour glass rollcase, log stops, hydraulic system L.P. 72 swing type log cutoff saw w/20 hour glass infeed rollcase, hydraulic system, log stops & hold downs, control booth & controls, drives Debarker & Log Merchandising Area Waste Wood Handling System 95 bark waste conveyor from debarker w/110 chain, drive 40 sawdust waste conveyor from chop saw w/110 chain, drive 100 main waste conveyor #1 under chop saw area w/110 chain, drive 40 main incline waste conveyor #2 with 110 chain, drive 160 bark & sawdust #2 incline waste conveyor to hog w/480 chain, S-drive, catwalk, drive WEST SALEM MACHINERY CO B waste wood hammer hog w/drop chute, catwalk, 200 hp drive, s/n: outfeed bark dump conveyor w/110 chain, drive 85 bark & sawdust incline waste conveyor to hog w/1x6 round link chain Sawmill Area 24 3-strand incline block transfer w/124 chain, flights, drive w/block sweep 65 4-strand head rig infeed block transfer w/log stop & loader, 82 chain, drive CORLEY auto-set stud log carriage w/(2) head blocks, TEMPOSONIC set works, pantograph, rails & controls SEARING/TYRONE-BERRY SM 160 hydraulic carriage w/hydraulic system, carriage bumpers & controls CM&E #32 8 knife head rig RH pre-slabber w/150 hp drive motor & controls MCDONOUGH 6 RH high strain band head rig w/lewis controls log scanning system, 300 hp drive motor, hydraulic system, controls, operators control booth 32 x45 outfeed head rig rollcase w/12 rolls, drive 32 3-strand block incline transfer w/log stop & loader, 124 chain w/flights, drive 24 3-strand block infeed transfer to twin head rig w/82 chain, drive MCDONOUGH 5 twin band head rig w/sharp chain feed system, press rolls, 2000 Hi-Tech log scanning system w/controls, twin CM&E 48 spiral type pre-slabber w/150 hp drive & motors, MCDONOUGH 5 twin high strain band head rig w/150 hp drives & controls Twin 12 & 20 3-strand head rig outfeed lumber transfers w/78 chain, drives 36 2-section dropout transfer from twin head rig w/10 slat bed transfer, 2-strand lumber transfer w/78 chain, drives PRESCOTT 5 horizontal band resaw w/infeed & outfeed rollcases, 200 hp drive motor & controls, s/n: section outfeed cross lumber transfer from resaw w/78 chain, drives 16 2-strand lumber storage transfer w/81x chain, drive 42 2-section, 3-strand lumber cross transfer w/78 chain, drives L-P 4 x36 gang edger w/14 infeed canted rollcase, 45 outfeed rollcase, splined arbor, babbitt guides, 350 hp drive motor & controls Electrical room w/plc cabinets, A-B 3-section motor control center & misc. disconnects workbench, storage shelves, electrical parts & supplies, SONY computer system, electrical tooling & SKK 10 1 ton roll-a-round bridge crane unit MILLER Gold Star 452, 550 amp electric arc welder Twin outfeed rollcase w/jump chain, approx. 80, (1) 42, (1) 30 rolls Additional photos & information on our website: murphyauction.com

9 Saratoga, WY - to be Sold as 1 Lot Sawmill Waste Wood Systems 30 head rig #1 waste wood conveyor w/110 chain, drive 16 head rig #2 waste wood conveyor w/110 chain, drive VIBRA-PRO 24 x32, 24 x85, 24 x100 main mill vibratory waste conveyors 24 resaw waste conveyor w/110 chain, drive 42 chip waste conveyor to barker area w/110 chain, drive VIBRA-PRO 24 x50 vibratory waste conveyor w/drive & controls VIBRA-PRO 24 x30 #3 main mill vibratory waste conveyor w/5 fiberglass tub-section, MDI metal detector w/controls to chipper VIBRA-PRO 24 x60 vibratory waste conveyor from circle resaw PRECISION 66 8 knife waste wood chipper w/horizontal feed, top discharge, 300 hp drive motor & controls, s/n: chip conveyor under chop saw area w/s-drive, 110 chain, drive 42 incline chip conveyor to surge bin w/82 chain & flights, drive 12 x16 chip surge bin w/twin auger feed, drive PRECISION 8 x8 double deck chip screen w/drive & controls US METAL WORKS 24 x24 chip feeder w/drive & controls ROOTS 827 high pressure blower w/silencers, 200 hp drive motor & controls 55 incline chip conveyor to bin w/82 chain & flights, drive Spare RADER high pressure blower by chip bin L-P 60 unit waste wood truck loading bin w/live bottom feed & drive Filing & Grinding Room Equipment (2) ARMSTRONG #4 RH, (1)#4LH bandsaw sharpeners w/clamps & stands, s/n s: 3572, 7541, 4551 ARMSTRONG #5, #4 stretcher rolls w/anvil, welding clamp & stand, s/n s: 1409, 4425 Hoe head rig guide grinder w/bench MICHIGAN MK traveling head knife grinder w/knife clamps, s/n: 406 CM&E slabber head knife grinder w/grinding head, s/n: 262 NEWMAN G head rotary tub knife grinder, s/n: IMW babbitt guide grinder ARMSTRONG #54 circle saw grinder, s/n: VOLLMER CHC-20-H carbide circle saw grinder, s/n: 790 WRIGHT W-350 circle saw top & face grinder SYSTI-MATIC circle saw dual side grinder ARMSTRONG 3-10-C circle saw stretcher roll, s/n: JACOBSON JM-300 circle saw dual side grinder 48 x12 vertical air receiver tank Filing & grinding room tooling & supplies including swedges, shapers, leveling gauge, grinders, hand tools, parts & supplies saw anvils, bench vises, grinding wheels, saw carts, hand truck, babbitt pot, blower, VICTOR torch set, welding stand, babbitt jigs, saw blades, etc. Maintenance Shop Area OSDICK 14 radial-arm drill press w/power head & T-slot table MILWAUKEE vertical milling machine w/vise, s/n: 22R-5572 WESTWARD 15 floor type drill press SIDNEY 72 engine lathe w/16 swing, 72 bed, tail stop, steady rest, lathe tooling, s/n: 6931 RIDGID 800 pipe & bolt threader w/dies & cart, s/n: MILLER 500 amp electric arc welder BALDOR 8 bench grinder on stand Roll bed 100 ton hydraulic arbor press w/pump & controls KALAMAZOO 12 abrasive cutoff saw w/stand GATES 707 hydraulic hose machine w/hydraulic pump, hose & fittings COLL-O-CRIMP IT-400 hydraulic hose machine w/pump, hose & fittings Small shop tools, mill parts & supplies including of pneumatic tools, power tools, floor jacks, bolt bins w/contents, steel inventories, hydraulic pumps & motors, bearings, chain hoist, V-belts, roller chain sprockets, space heaters, mills parts & supplies, spare motor & gear motor inventory including electric motors to 300 hp, gear motors to 10 hp, gear boxes, 4 x16 & 4 x24 steel shelf units Mill parts & supplies store room & storage area including mill chain, roller chain, fire system parts, electrical wire & conduit, light bulbs, hose, bushings, couplings, pipe fittings & valves, oilers, air valves, large quantity of bearings, electrical spare parts, supplies, etc. 18 x48 vertical air receiver tank Boiler & Kiln Systems 280 troughing belt incline hog fuel conveyor w/16 pipe uprights, belt cover, catwalks, installed new WELLONS hog fuel boiler system including WELLONS 120 unit rotary hog feed & storage bin w/drives & controls, s/n: B ; 75 incline hog fuel conveyor w/480 chain to boiler, 2001 WELLONS 350 psi hog fuel boiler w/wellons environmental air scrubbing system, ash collection unit, water softener system, chemical mixing & feed system, condensate tank unit, heating surface 6989, 50,000 lb PPH, automatic feed system, hydraulic units, WELLONS PLC boiler controls, installed 2001, s/n: B ; ALLEN BRADLEY 6-section motor control center w/starters & switches BABCOCK & WILCOX boiler system including BABCOCK & WILCOX gas & hog fuel fired 625 hp package boiler system w/31,500,000 btu high pressure burner unit, JOHNSON burner controls, WELLONS 100 unit rotary hog fuel feed bin w/twin outfeed auger feed unit, 100 hog fuel conveyor to boiler w/480 chain, all drives & controls, s/n: FM-1636 KEWANEE portable hog fuel boiler w/pumps, controls, valves & drives RIDGID 300 pipe threader w/dies & stand MILLER 275 amp arc welder 2000 WELLONS 102 prefabricated double track dry kilns w/zone controls, in, out & through kiln rail, WELLONS control room & controls (2) 102 cinder block double track dry kilns w/kiln track, kiln controls

10 Saratoga, WY - to be Sold as 1 Lot Planer Area 40 2-strand unit infeed transfer w/82 chain, drive L-P 72 3-arm unit breakdown hoist w/drive, cross transfer to pineapple feed 8 x36 sticker reclaim belt conveyor w/drive 30 2-strand sticker bundle transfer w/drive & WOODS 415-M2 6 x15 12 knife, 4 head motorized planer, s/n: 31938; NEWMAN 455 dual pineapple planer feed table, s/n: 4442; hydraulic drives for planer & feed table w/hydraulic system & controls, 48 x12 outfeed planer slow down belt, all drives & controls 72 planer low pressure blower system w/100 hp drive & blow pipe ACCU-VAR automatic power correction unit w/plc controls, 500 KVAR CUTLER/HAMMER M-50 2-section main power service w/disconnects & switches, 1,600 amp main 14 3-strand lumber transfer & grading table w/138 chain, drive SIMPLE-SIMON 2 saw stud trimmer system w/8 2-strand lumber infeed transfer, 20 3-strand lug through transfer, 6 3-strand outfeed lumber transfer w/78 camel back chain, 5 hp saw arbor motors, adjustable even ending lumber fence, automatic lumber grade stamp unit w/all drives 24 2-section, 3-strand hula saw infeed lumber transfer w/78 chain, drive L-P 2-saw hula saw w/8 roll table, lumber stops, 6 x12 block discharge belt conveyor, (2) 3 hp saw arbor motors 18 x40 trimmer & hula saw belt waste conveyor w/drive Swing type 4 cutoff saw w/drive 36 3-strand hula saw green chain w/78 RT chain, drive (14) 4 x6 rollout lumber carts 24 3-strand green chain from stud trimmer w/78 chain, drive HEMCO stud stacker system including 4-section lug pass thru lumber transfer, 10 lugged separation transfer, DATAPPLY automatic stud labeler unit, HEMCO stud stacker w/3-arm stacker, 2-arm unit let down hoist, end squeeze, hydraulic system, drives & controls SIGNODE unit package system including 54 x24 infeed unit rollcase, SIGNODE automatic steel banding unit w/auto feed strap unit, SIGNODE automatic power strapping head, top & side squeeze, 54 x20 outfeed unit rollcase, hydraulic system, drive & controls (2) all steel rail car loading docks w/24 platform, 30 x8 incline forklift ramps 18 x55, 18 x30 waste belt conveyors WILLIAMS 18 x32 drop feed waste wood pulverizer w/bottom discharge, 125 hp drive motor, hog sub base & controls 36 BURNS low pressure blower system w/blow pipe & controls 6 x14 block outfeed waste conveyor w/drive & controls QUINCY N.W. QNW-241-D rotary screw air cooled air compressor w/50 hp drive motor & controls, s/n: C 32 x6 horizontal air receiver tank PNEUMATECH EE-250 air dryer w/controls Mill Equipment QUINCY N.W. QNW-1500-B 300 hp rotary screw air cooled air compressor w/drive & controls, s/n: KEENE CORP. DD603ED150 desiccant air dryer unit w/pre filter & controls, s/n: x8 vertical air receiver tank PORTLAND IRON WORKS carriage drive BM&M 8 x12 triple drop chip screen w/drive and misc. steel, s/n: WIG-WAG rail car chip loading system for mill drives, blow pipe, car mover SPECIALTY WOOD PRODUCTS MACHINERY CO bin stud bin sorter w/sort system, drives & controls (24) heavy duty H-beam log scaling bunks Mill equipment & supplies including electric motors, gear motors, rollcases, metal cutting bandsaw, high and low pressure blowers & feeders, mill sprockets, hydraulic & air cylinders, filing room equipment, belt conveyor, electrical wire, chipper parts, edger parts & misc. Heavy Equipment Shop Shop equipment & tooling including ALKOTA steam cleaner, hydraulic barrel press, bench grinders, workbenches w/vises, LINCOLN arc welder, pneumatic grease pump, torch cart, NORTHERN drill press, GATES hydraulic hose machine, abrasive cutoff saw, tire spreader, storage racks, 32 x6 vertical air receiver tank, bolt bins w/contents, equipment parts & supplies, tires, filters, oil & grease WELLONS double track kiln w/fans, sides, rail, fin tube, controls, catwalk, desks, chairs, computer systems, printers, small TV s, COMPAQ data system, paper shredder, refrigerator, battery charger & office supplies Equipment Not Installed Hula saw system, belt conveyors, transfers, sorter parts, catwalks, stairs, frames, dump bins, L-P edger system, infeed system & positioning system, air compressors, SHARP chain, ATLAS compressor, TRISTATE finger joint line, INDUSTRIAL chop saws, pay-out table, SM CYCLO drives, heaters, fans, stretcher, rolls, chain, lights, hydraulic unit, COE scanner, electrics,-armstrong stretchers, coolers, LINCOLN welders, kiln fans & welders, break down hoist, fans, hydraulic units, belt conveyor, kiln carts, singulator, stacker, catwalks, landing table, blow pipe, misc. structural steel & racks, 20 wood shed Planer Grinding Room NIELSEN 800 automatic side head grinder w/set-up stand & controls JET 14 bench type drill press Planer grinding room spare parts & supplies including spare planer head, planer cylinders, planer knives, set-up stands, CLIMAX portable key-way cutter, SIGNODE bander, misc. parts & supplies, deck & chairs LINCOLN 250 amp bullet electric welder PEERLESS 62 unit by-products truck loading & storage bin w/hydraulic gates & pump system (250+) 1 x4 x54 kiln stickers Approx. (200) all steel tube type kiln trucks w/steel wheels

11 Saratoga, WY - to be Sold as 1 Lot Rolling Stock & Related Equipment LETOURNEAU 2594 log stacker w/cummins diesel engine, single pass log forks, pneumatic tires, EROPS, s/n: LETOURNEAU 2594 log stacker w/cummins diesel engine, log forks & mast off machine, s/n: CATERPILLAR 980F wheel loader w/diesel engine, BALDERSON log forks, pneumatic tires, EROPS, Hrs: 45,662, s/n: 8JN00889 CATERPILLAR 966C wheel loader w/diesel engine, MEDFORD log forks & slip-on bucket, pneumatic tires, EROPS, Hrs: 05186, s/n: 76J6670 CASE 1845C 4x4 skid steer loader w/diesel engine, front bucket, cushion tires, OROPS, Hrs: 5,070, s/n: JAF GEHL x4 skid steer loader w/diesel engine, front bucket, cushion tires, OROPS, Hrs: 5,069, s/n: KOEHRING 6633L track mounted log loader w/heel boom & KOEHRING hydraulic grapple, diesel engine, EROPS, s/n: PRENTICE 625 track mounted log loader w/heel boom & grapple, diesel engine, EROPS, Hrs: 9,852, s/n: CP CAT V-180B 18,000 lb dual pneumatic forklift, Hrs: 9,827, s/n: 68Y01263 CAT V-180B 18,000 lb dual pneumatic forklift, diesel, s/n: 68Y00496 HYSTER S80BCS 8,000 lb forklift w/propane engine, side shift, hard tires, lumber forks, OROPS, Hrs: 2,674, s/n: C HYSTER H80 8,000 lb forklift w/gas engine, dual pneumatic tires, lumber forks, side shift, OROPS HYSTER H70XL 7,000 lb forklift w/gas engine, side shift, cushion tires, lumber forks, OROPS, Hrs: 2,576, s/n: F K GALION 150A 15 ton rough terrain hydraulic crane w/diesel engine, pneumatic tires, EROPS, Hrs: 4, ROSS-CONDOR 60N 60 rough terrain manlift w/gas & propane engine, Hrs: 7,032, s/n: N CATERPILLAR 14E road grader w/diesel engine, 14 grader blade, rear ripper, EROPS, 4 wheel rear drive, Hrs: 14,511, s/n: 72G935 INTERNATIONAL TD20-C crawler tractor w/diesel engine, 11 front hydraulic blade, ATECO rear single barrel ripper, OROPS, Hrs: 1,246, s/n: U FWD carrier 2 axle rotary snow removal unit w/snogo snow head, (2) diesel engine, EROPS, Miles: 21,399, s/n: portable troughing belt chip reload conveyor w/electric drive, on single axle carrier INTERNATIONAL VF-190 T/A axle dump truck w/diesel engine, 10 yard dump box PETERBILT axle water truck w/diesel engine, 4,000 gallon water tank, pump & hose reel, s/n: CHEVROLET /2 ton 4x4 club cab pickup w/gas engine, 4 spd transmission, cab guard, tool box, fuel tank, Miles: 211, CHEVROLET /4 ton 4x4 regular cab pickup w/gas engine, automatic transmission, air, tilt, cruise, tool box, fuel tank, cab guard, Miles: 124,599 M-B COMPANY 72 sweeper head attachment for skid steer loader YAMAHA Bravo snow mobile w/snowbird 8 S/A ATV trailer, Miles: 2,276 L-P 10,000 lb log truck trailer loader w/pendant hook, drive & controls RICE LAKE WEIGHING SYSTEMS 10 x70 above ground truck scales w/748-p digital readout & FARGO SP-2000 printer Bid live or bid online with MurphyLIVE! TERMS AND CONDITIONS buyers are responsible for any damage to the real property

12 Public Auction Thursday, July 12, 2012 James G. Murphy Co. Commercial & Industrial Auctioneers P.O. Box 82160, Kenmore, WA PRESORTED FIRST CLASS MAIL U.S. POSTAGE PAID SEATTLE, WA PERMIT NO. 963 LeTourneau Saratoga, WY James G. Murphy Co. Commercial & Industrial Auctioneers PUBLIC AUCTION (2) Complete Mills w/sawmill Equipment, Rolling Stock, Each Sold as 1 Lot Thursday, July 12, Noon Montrose, CO & Saratoga, WY Bid live or bid online with MurphyLIVE!