PC750 SERIES. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 157, ,055 lb PC750LC-6 PC750SE-6 HYDRAULIC EXCAVATOR PC750

Size: px
Start display at page:

Download "PC750 SERIES. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 157, ,055 lb PC750LC-6 PC750SE-6 HYDRAULIC EXCAVATOR PC750"

Transcription

1 PC750 SERIES PC750LC-6 PC750SE-6 NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 157, ,055 lb PC750 HYDRAULIC EXCAVATOR

2 PC750 Series Hydraulic Excavator WALK-AROUND With the introduction of the PC750, Komatsu has brought the field-proven performance of the Avance Dash 6 series to the 80-ton excavator class. By combining unrivaled control with outstanding productivity, Komatsu continues the tradition of setting new industry standards. High pressure hydraulic system provides fast cycle times and smooth operation. Swing accel function maximizes efficiency and boom control for 90 or 180 loading operations. Two mode settings for the boom allow you to select either a smooth trench floor or aggresive digging in tough materials.. New, Dual Swing motors increase swing torque by 20% Strengthened hydraulic cylinders provide outstanding reliability. Three working modes let you match engine speed, pump speed, and system pressure to the current application. 2

3 PC750 HYDRAULIC EXCAVATOR FLYWHEEL HORSEPOWER 338 kw rpm Self-diagnostic monitor features Current operating conditions Historical information Multi-position, pressureproportional control levers allow the operator to work comfortably while maintaining accuracy. OPERATING WEIGHT kg 157, ,055 lb BUCKET CAPACITY STANDARD: m yd 3 SE: m yd 3 Windshield wiper is mounted to the cab for better visibility and easier window opening. Comfortable cab Komatsu s low-noise cab design uses viscous cab mounts for reduced noise and vibration. New 338 kw 454 HP engine provides plenty of power for maximum productivity, while meeting Tier II emission requirements. Large undercarriage provides excellent machine stability and transportability as well. One-touch oil drain valve helps make maintenance easy. New extended oil and oil filter change intervals lower maintenance and protect the environment. SE model shown above may include optional equipment. Two travel speeds provide smooth, efficient travel around the job site. 3

4 PRODUCTIVITY FEATURES Service Self-Diagnostic Monitor The improved Avance monitor is equipped with an on-board self-diagnostic system. This diagnostic system can display information for the following: Current operating conditions engine speed, hydraulic main pump pressures, and electronic signals. Historical abnormalities records up to 20 deviations within the past 1,000 hours of operation. If an abnormality occurs, the system will display a warning or sound an alarm. Excellent Productivity PC750 Features Fast and smooth hydraulics Excellent digging performance Outstanding machine stability Large drawbar pull High engine output Large bucket capacity Excellent transportability Together, these features make the PC750 the most productive excavator in its class. For the operator the PC750 combines the following: Low noise design Spacious cab Easy routine maintenance New controls for boom vibration Unrivaled control New safety features Outstanding Reliability The latest in computerized stress analysis is combined with field testing to ensure that each component from the frame to the electronics delivers superb reliability. The hydraulic system features: High pressure in-line filters to protect the hydraulic system from coarse contamination PPC filter to protect control circuits Strengthened hydraulic cylinders Stepped hose connections to prevent leaks Strengthened work equipment Strengthened track frame Easy Maintenance One-touch engine oil drain valve Main relief valve quick couplers facilitate troubleshooting hydraulics Extended oil and filter drain intervals from 250 to 500 hours for engine 4

5 PC750 HYDRAULIC EXCAVATOR Easy Operation Self-Diagnostic Monitor Working Mode Selection The Avance excavator is equipped with three working modes. Each mode is designed to match engine speed, pump speed, and system pressure to the current application. Working Mode Application Advantage H/O Heavy-duty Maximum production/power Fast cycle times G/O General Good fuel economy Good cycle times Increased power DH/O Hard-rock Quicker engine response to sudden load changes Heavy Lift Three Working Modes Heavy Lift Mode Travel Speeds Selection Application Result OFF Normal Standard operating pressure ON Heavy lifting Increased working pressure by 10% Travel Speeds The Avance excavator is equipped with two travel speeds to provide smooth, efficient travel around the job site. Swing Accel The swing accel function is designed to control boom and swing speeds to provide optimum responses for different loading angles. As a result, operators can use the same easy motion for 180 loading as they do for 90 loading. Selection ON OFF Unrivaled Control Two-Mode Setting for Boom Result Oil flow to the swing motor is increased. 180 loading operations are most efficient. Oil flow to the boom is increased. 90 loading operations are most efficient. By pushing a button, it is possible to select either a smooth arm operation or powerful boom digging force. Based on your selection, the system chooses the boom head relief valve pressure from two available settings. The LCD portion of the monitor has four different display modes that aid in identifying potential problems before they become major problems: Four Diagnostic Modes 1 Time Display mode is the default mode and shows the time and hour meter reading. 2 User Code Display mode displays a trouble code and sounds an alarm when a problem has been detected. 3 Trouble Data Memory mode monitors 32 separate items and stores up to 20 abnormalities over 999 hours for effective troubleshooting. Together, these modes allow you to troubleshoot 119 different problems to minimize downtime. 5

6 WORKING ENVIRONMENT The Avance cab interior is spacious and provides a comfortable working environment Operator s Cab Multi-Position Controls The multi-position, pressure proportional control levers allow the operator to work in comfort while maintaining precise control. A double-slide mechanism allows the seat and controllers to move together or independently, allowing the operator to position the controllers for maximum productivity and comfort. Cab Mounts The cab rests on viscous damping mounts to reduce vibration and noise from the machine body. Operator fatigue is reduced. Noise The noise levels at the operator s ear have been decreased by improving the cab mounts, and reducing engine operating noise. The multi-position diagnostic monitor is easily reached and can be rotated to remove glare. Plus, the inclined dashboard makes the switches and fuel control dials easier to view and use. Cab mounts Floor Revolving Frame Rubber Silicon Oil 6

7 PC750 HYDRAULIC EXCAVATOR Safety Features The PC750 has been designed for maximum safety and convenience: Travel alarm Large handrails Step light for cab exits at night Large catwalk Fire partitions between hydraulic pumps and engine room Interconnected horn and lights (optional) 7

8 Base Machine SPECIFICATIONS ENGINE Model Komatsu SAA6D140E-3 Type cycle, water-cooled, direct injection Aspiration Turbocharged and aftercooled Number of cylinders Bore mm 5.51" Stroke mm 6.50" Piston displacement ltr 930 in 3 Flywheel horsepower kw rpm (SAE J1349) Governor All-speed, electronic Meets EPA Tier II emission standards. HYDRAULIC SYSTEM Type OLSS (Open-center Load Sensing System) Number of selectable working modes Main pump: Type Variable capacity piston pump Pumps for Boom, arm, bucket, swing, and travel circuits Maximum flow ltr 261 U.S. gal/min Sub-pump for control circuit Gear pump Hydraulic motors: Travel x axial piston type Swing x axial piston type Relief valve setting: Implement circuits kg/cm 2 4,550 psi Travel circuit kg/cm 2 4,550 psi Swing circuit kg/cm 2 4,120 psi Pilot circuit kg/cm psi Hydraulic cylinders: Number of cylinders bore x stroke Boom mm x 1950 mm 7.9" x 76.8" Arm mm x 2250 mm 7.9" x 88.5" Bucket mm x 1610 mm 7.3" x 63.4" DRIVES AND BRAKES Steering control Two levers with pedals Drive method Fully hydrostatic Travel motor Piston motor, in-shoe design Maximum drawbar pull kg 125,660 lb Gradeability % Maximum travel speed: High km/h 2.6 mph Low km/h 1.7 mph Service brake Hydraulic lock Parking brake Wet, multiple-disc SWING SYSTEM Driven by x Hydraulic motors Swing reduction Planetary double reduction Swing circle lubrication Single row, shear type, ball bearing Swing lock Oil disc Swing speed rpm UNDERCARRIAGE Center frame H-frame Track frame Box-section Seal of track Sealed track Track adjuster Hydraulic Number of shoes: PC750-6, SE per side PC750LC per side Number of carrier rollers per side Number of track rollers: PC750-6, SE per side PC750LC-6, SE per side COOLANT AND LUBRICANT CAPACITY (REFILLING) Fuel tank ltr 232 U.S. gal Radiator ltr 22.5 U.S. gal Engine ltr 14.5 U.S. gal Final drive, each side ltr 5.3 U.S. gal Swing drive ltr 6.5 U.S. gal Hydraulic tank ltr 116 U.S. gal OPERATING WEIGHT Operating weight, including kg 26,450 lb counterweight, 8200 mm 26'11" one-piece boom, 3600 mm 11'10" arm, 3.1 m yd 3 SAE heaped bucket, operator, lubricants, coolant, full fuel tank, and standard equipment. Subtract 3000 kg 6,610 lb from operating weight if using optional counterweight. Standard Shoes Operating Weight Ground Pressure Operating Weight Ground Pressure mm in kg lb kg/cm 2 psi kg lb kg/cm 2 psi " , N/A N/A N/A N/A " , , " , , ,010 40" , , ,110 44" N/A N/A N/A N/A , Max. Weight* , , *Maximum weight includes counterweight, full roller guard (PC750-6 only), and 4.8 m yd 3 bucket. LC 8

9 PC750 HYDRAULIC EXCAVATOR DIMENSIONS with 8.2 m 26'11" boom Arm 3600 mm 11'10" 4600 mm 15'1" 5600 mm 18'4" A Overall length mm 46'3" mm 45'9" mm 44'5" B Length on ground (transport) 8165 mm 26'9" 8260 mm 27'1" 8035 mm 26'4" C Overall height (to top of boom) 4785 mm 15'8" 5970 mm 19'7" 6560 mm 21'6" D Overall width 4005 mm 13'2" E Overall height (to top of cab) 3515 mm 11'6" F Ground clearance, counterweight 1555 mm 5'1" G Min. ground clearance 840 mm 2'9" H Tail swing radius 4205 mm 13'10" R = 4300 mm 14'1" I Length of track on ground 4500 mm 14'9" 5020 mm 16'6" J Track length 5810 mm 19'1" 6330 mm 20'9" K Track gauge 3500 mm 11'6" L Width of crawler 4110 mm 13'6" *4310 mm 14'2" **3390 mm 11'1" M Shoe width 600 mm 24" N Grouser height 50 mm 2" O Machine cab height 3495 mm 11'6" R = Tail swing radius * = PC750LC ** = When retracted BACKHOE RANGE AND BUCKET/ARM COMBINATION Boom length 8200 mm 26'11" 8200 mm 26'11" 8200 mm 26'11" Arm length 3600 mm 11'10" 4600 mm 15'1" 5600 mm 18'4" A Max. digging height mm 39'2" mm 40'1" mm 42'1" B Max. dumping height 8140 mm 26'8" 8560 mm 28'1" 8935 mm 29'4" C Max. digging depth 8445 mm 27'8" 9170 mm 31'0" mm 34'3" D Max. vertical wall digging depth 6275 mm 20'7" 7520 mm 24'8" 8615 mm 28'3" E Max. digging depth of 8' level 8315 mm 27'3" 9300 mm 30'6" mm 34'0" F Max. digging reach mm 44'8" mm 47'4" mm 50'11" G Max. digging reach at ground level mm 43'10" mm 46'1" mm 50'2" H Min. swing radius of implement 5845 mm 19'2" 5870 mm 19'3" 5910 mm 19'5" Bucket digging force kg 66,580 lb kg 66,580 lb kg 66,580 lb Arm crowd force kg 53,351 lb kg 48,060 lb kg 40,785 lb BACKHOE BUCKET AND ARM COMBINATION Bucket Arms Bucket Number Type Capacity OLW Weight of Teeth Tooth Size 11'10" 15'1" 18'4" 9'7" (SE) 2.49 m yd mm 48" 3017 kg 6,652 lb 5 X500 V V X V Komatsu 2.89 m yd mm 54" 3272 kg 7,214 lb 6 X500 V W Y V H Series 3.30 m yd mm 60" 3451 kg 7,608 lb 6 X500 V X Z V SD 3.72 m yd mm 66" 3705 kg 8,168 lb 6 X500 W Y Z V V Used with weights up to 3,500 lb/yd 3, W Used with weights up to 3,000 lb/yd 3 X Used with weights up to 2,500 lb/yd 3, Y Used with weights up to 2,000 lb/yd 3, Z Not useable 9

10 PC750-6 LIFTING CAPACITY C Equipment: Boom: 8200 mm 26'11" Bucket: 3.06 m yd 3 Shoes: 600 mm 24" Heavy lift mode Counterweight: kg 26,450 lb A: Reach from swing center B: Bucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach PC750-6 Arm: 3600 mm 11'10" A 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum Unit: kg lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 7.6 m *12950 *12950 *7550 *7550 *7550 * ' *28,600 *28,600 *16,600 *16,600 *16,600 *16, m *17400 *17400 * *11250 *10550 *7850 * ' *38,400 *38,400 *33,300 31,600 *24,800 *23,300 *17,300 *17, m *33950 *33950 *24250 *24250 *19200 *18750 * *8350 * ' *74,900 *74,900 *53,400 *53,400 *42,400 *41,400 *35,600 30,100 29,200 22,500 *18,400 *18, m * * * ' *59,900 54,900 *46,200 38,600 37,000 28,500 28,200 21,600 *20,200 17, m * * * ' *63,700 51,000 46,500 35,200 *35,400 27,000 27,300 20,700 *22,700 17, m *17500 *17500 * * ' *38,600 *38,600 *64,300 48,700 *45,800 34,500 34,200 25,900 26,600 20,000 23,300 17, m *14550 *14550 *23450 *23450 * ' *32,000 *32,000 *51,700 *51,700 *62,100 47,700 44,700 33,600 33,500 25,200 26,100 19,500 24,700 18, m *21500 *21500 *31200 *31200 * ' *47,400 *47,400 *68,800 *68,800 *57,400 47,600 44,400 33,300 33,200 24,900 27,400 20, m *29350 *29350 *27850 *27850 * * * ' *64,700 *64,700 *61,400 *61,400 *49,700 48,300 *38,500 32,200 *30,800 25,300 29,800 24, m *20800 *20800 *17150 *17150 *13300 *13300 *12550 * ' *45,900 *45,900 *37,800 *37,800 *29,300 *29,300 *27,700 *27,700 Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping. PC750-6 Arm: 4600 mm 15'1" A 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' 12.2 m 40' Maximum Unit: kg lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 7.6 m *8400 *8400 *5950 * ' *18,500 *18,500 *13,100 *13, m *11950 *11950 *10150 *10150 *6150 * ' *26,300 *26,300 *22,400 *22,400 *13,800 *13, m *17850 *17850 * * *7800 *7800 *6550 * ' *39,400 *39,400 *33,600 31,700 *27,000 23,800 *17,200 *17,200 *14,400 *14, m *25,400 *25400 * * * *7100 * ' *56,000 *56,000 *43,800 40,700 *36,300 30,000 29,500 22,800 *20,500 17,500 *15,600 *15, m * * * ' *61,600 53,700 *47,400 37,900 36,700 28,300 28,300 21,700 22,300 16,800 *17,400 15, m *18100 *18100 * * ' *39,900 *39,900 *64,300 50,500 45,900 34,700 35,200 26,800 27,400 20,700 21,700 16,300 *19,900 15, m *21050 *21050 * ' *46,400 *46,400 *64,100 48,700 46,600 34,300 34,100 25,800 26,700 20,100 22,200 16, m *26100 *26100 * ' *57,500 *57,500 *61,300 47,900 44,800 33,600 33,500 25,200 26,300 19,700 24,100 18, m *32450 *32450 * * ' *71,500 *71,500 *55,700 48,000 *42,700 31,900 33,500 25,200 27,700 20, m *26650 *26650 *21150 *21150 * * ' *58,700 *58,700 *46,600 *46,600 *37,000 34,100 *28,600 26, m *14700 *14700 *11750 * ' *32,400 *32,400 *26,000 *26,000 Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping. 10

11 PC750 HYDRAULIC EXCAVATOR PC750-6 LIFTING CAPACITY C Equipment: Boom: 8200 mm 26'11" Bucket: 3.06 m yd 3 Shoes: 600 mm 24" Heavy lift mode Counterweight: kg 26,450 lb A: Reach from swing center B: Bucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach PC750-6 Arm: 5600 mm 18'4" A 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' 12.2 m 40' Maximum Unit: kg lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 7.6 m *5950 *5950 *4350 * ' *13,100 *13,100 *9,600 *9, m *8900 *8900 *7250 *7250 *4450 * ' *19,600 *19,600 *16,000 *16,000 *9,800 *9, m *11800 *11800 *10500 *10500 * *4700 * ' *26,000 *26,000 *23,200 *23,200 *18,800 18,000 *10,300 *10, m *31000 *31000 *22400 *22400 *17800 *17800 * * * *5050 * ' *68,300 *68,300 *49,400 *49,400 *39,200 *39,200 *32,800 30,100 *28,500 22,600 *21,800 17,200 *11,100 *11, m *30200 *30200 * * * *5500 *5500 5' *66,600 *66,600 *56,400 54,900 *43,500 38,200 *35,600 28,100 28,000 21,300 21,900 16,400 *12,200 *12, m *21300 *21300 * * * ' *47,000 *47,000 *61,000 50,600 *46,600 35,500 34,800 26,400 26,800 20,100 21,100 15,600 *13,700 12, m *21600 *21600 * * ' *47,600 *47,600 *62,700 47,800 43,400 32,200 33,300 25,000 25,800 19,200 20,400 15,000 *15,800 13, m *24900 *24900 * * ' *54,900 *54,900 *61,600 46,300 43,500 32,300 32,400 24,100 25,100 18,600 20,100 14,700 *19,000 14, m *30250 *30250 * ' *66,700 *66,700 *58,000 45,900 43,000 31,800 32,000 23,700 24,900 18,400 21,600 15, m *30350 *30350 * * * * ' *66,900 *66,900 *51,400 46,200 *40,500 32,000 *32,000 23,800 *24,600 19, m *23700 *23700 *18550 *18550 *14400 *14400 *10750 * ' *52,300 *52,300 *40,900 *40,900 *31,800 *31,800 *23,700 *23,700 Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping. 11

12 PC750SE-6 Super Earthmover HYDRAULIC SYSTEM Hydraulic cylinders: Cylinders Number Bore x stroke x rod diameter Boom x 1892 x " x 74.5" x 5.5" Arm x 1610 x " x 63.4" x 4.7" Bucket x 1420 x " x 55.9" x 6.3" OPERATING WEIGHT Operating weight, including 7100 mm 23'4" one-piece boom, 2945 mm 9'8" arm, 3.82 m yd 3 SAE heaped backhoe bucket, operator, lubricants, coolant, full fuel tank, and standard equipment. Shoes Operating Weight Ground Pressure 600 mm kg 1.22 kg/cm 2 24" 170,850 lb psi 700 mm kg 1.06 kg/cm 2 28" 172,390 lb psi WORKING RANGE AND ATTACHMENTS Boom length 7100 mm 23'4" Arm length 2945 mm 9'8" A Maximum digging height mm 37'9" B Maximum dumping height 7565 mm 24'10" C Maximum digging depth 7015 mm 23'0" D Maximum vertical wall digging depth 4930 mm 16'2" E Maximum digging depth of cut for 8' level 6870 mm 22'6" F Maximum digging reach mm 39'11" G Maximum digging reach at ground level mm 38'11" H Minimum swing radius of implement 5645 mm 18'6" Bucket digging force kg 87,960 lb Arm crowd force kg 74,520 lb BACKHOE BUCKET AND ARM COMBINATION Bucket Capacity OLW* Weight SE Boom Number 7.1 m 23'4" of Teeth 2.95 m 9'8" Arm 3.06 m yd mm 56" 3743 kg 8,251 lb 5 Komatsu 3.82 m yd mm 68" 4007 kg 8,835 lb 6 SD 4.20 m yd mm 74" 4140 kg 9,127 lb m yd mm 80" 4495 kg 9,910 lb 7 Used with weights up to 1.8 ton/m 3 3,000 lb/yd 3 Used with weights up to 1.5 ton/m 3 2,500 lb/yd 3 12

13 PC750SE-6 PC750 HYDRAULIC EXCAVATOR DIMENSIONS with 7.1 m 23'4" boom and 2.95 m 9'8" arm PC750SE-6 LIFTING CAPACITY C Equipment: Boom: 7100 mm 23'4" Bucket: 3.82 m yd 3 Shoes: 600 mm 24" Heavy lift mode Counterweight: kg 26,450 lb A: Reach from swing center B: Bucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach PC750SE-6 Arm: 2945 mm 9'8" A 1.5 m 5' 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' Maximum Unit: kg lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 7.6 m *17050 *17050 *12,100 *12,100 25' *37,600 *37,600 *26,600 *26, m *18150 *18150 * *12, ' *40,000 *40,000 *35,400 29,200 *26,900 25, m *33150 *33150 *24300 *24300 * * ' *73,100 *73,100 *53,600 *53,600 *43,300 39,800 36,700 28,200 *28,100 22, m * * ' *59,800 54,500 *46,600 37,500 35,500 27,000 28,200 21, m * ' *63,500 50,900 46,800 35,400 34,300 25,900 27,800 20, m *37950 *36150 * ' *83,700 *79,600 *63,800 48,800 45,300 34,000 33,400 25,000 28,700 21, m *28000 *28000 *35900 *35900 * ' *61,700 *61,700 *79,100 *79,100 *60,400 48,000 44,500 33,300 33,000 24,700 31,400 23, m *38300 *38300 *30800 *30800 * * * ' *84,500 *84,500 *67,900 *67,900 *53,100 48,300 *40,700 33,500 *32,900 27, m *23050 *23050 *17500 *17500 *13450 * ' *50,900 *50,900 *38,600 *38,600 *29,600 *29,600 Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping. 13

14 PC750LC-6 LIFTING CAPACITY C Equipment: Boom: 8200 mm 26'11" Bucket: 3.06 m yd 3 Shoes: 810 mm 32" Heavy lift mode Counterweight: kg 26,450 lb A: Reach from swing center B: Bucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach PC750LC-6 Arm: 3600 mm 11'10" A 3.0 m 10' 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' Maximum Unit: kg lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 7.6 m *12950 *12950 *7550 *7550 *7550 * ' *28,600 *28,600 *16,600 *16,600 *16,600 *16, m *17400 *17400 * * *7850 * ' *38,400 *38,400 *33,300 32,600 *24,800 24,100 *17,300 *17, m *33950 *33950 *24250 *24250 *19200 *19200 * * *8350 * ' *74,900 *74,900 *53,400 *53,400 *42,400 *42,400 *35,600 31,100 *31,000 23,300 *18,400 *18, m * * * * * ' *59,900 56,700 *46,200 39,900 *37,800 29,500 *32,200 22,400 *20,200 18, m * * * * * ' *63,700 52,800 *47,900 36,400 *39,500 28,000 *33,100 21,500 *22,700 17, m *17500 *17500 * * * * * ' *38,600 *38,600 *64,300 50,500 *49,800 35,800 *40,100 26,900 *32,600 20,800 *26,300 18, m *14550 *14550 *23450 *23450 * * * * * ' *32,000 *32,000 *61,700 *61,700 *62,100 49,500 *48,900 34,800 *39,300 26,200 *31,800 20,400 *30,100 19, m *21500 *21500 *31200 *31200 * * * * ' *47,400 *47,400 *68,800 *68,800 *57,400 49,400 *45,700 34,500 *36,600 25,900 *30,300 21, m *29350 *29350 *27850 *27850 *22550 *22550 * * * ' *64,700 *64,700 *61,400 *61,400 *49,700 *49,700 *38,500 33,400 *30,800 26,300 *29,800 25, m *20800 *20800 *17150 *17150 *13300 *13300 *12550 * ' *45,900 *45,900 *37,800 *37,800 *29,300 *29,300 *27,700 *27,700 Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping. PC750LC-6 Arm: 4600 mm 15'1" A 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' 12.2 m 40' Maximum Unit: kg lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 7.6 m *8400 *8400 *5950 * ' *18,500 *18,500 *13,100 *13, m *11950 *11950 *10150 *10150 *6150 * ' *26,300 *26,300 *22,400 *22,400 *13,600 *13, m *17850 *17850 * * *7800 *7800 *6550 * ' *39,400 *39,400 *33,700 32,700 *27,000 24,700 *17,200 *17,200 *14,400 *14, m *25400 *25400 * * * * *7100 * ' *56,000 *56,000 *43,800 41,900 *36,300 31,000 *31,300 23,600 *20,500 18,200 *15,600 *15, m * * * * * * ' *61,600 55,400 *47,400 39,200 *38,600 29,300 *32,600 22,500 *22,700 17,500 *17,400 16, m *18100 *18100 * * * * * * ' *39,900 *39,900 *64,300 52,200 *48,500 35,900 *40,000 27,800 *33,300 21,600 *22,600 17,000 *19,900 16, m *21050 *21050 * * * * ' *46,400 *46,400 *64,100 50,400 *49,800 35,600 *40,200 26,800 32,700 20,900 *23,800 17, m *26100 *26100 * * * * * ' *57,500 *57,500 *61,300 49,700 *48,200 34,900 *38,800 26,200 *31,400 20,500 *28,700 18, m *32450 *32450 * * * * ' *71,500 *71,500 *55,700 49,800 *42,700 33,100 *35,300 26,200 *29,000 21, m *26650 *26650 *21150 *21150 * * ' *58,700 *58,700 *46,600 *46,600 *37,000 35,400 *28,800 27, m *14700 *14700 *11750 * ' *32,400 *32,400 *26,000 *26,000 Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping. 14

15 PC750 HYDRAULIC EXCAVATOR PC750LC-6 LIFTING CAPACITY C Equipment: Boom: 8200 mm 26'11" Bucket: 3.06 m yd 3 Shoes: 810 mm 32" Heavy lift mode Counterweight: kg 26,450 lb A: Reach from swing center B: Bucket hook height C: Lifting capacity Cf: Rating over front Cs: Rating over side : Rating at maximum reach PC750LC-6 Arm: 5600 mm 18'4" A 4.6 m 15' 6.1 m 20' 7.6 m 25' 9.1 m 30' 10.7 m 35' 12.2 m 40' Maximum Unit: kg lb B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs 7.6 m *5950 *5950 *4350 * ' *13,100 *13,100 *9,600 *9, m *8900 *8900 *7250 *7250 *4450 * ' *19,600 *19,600 *16,000 *16,000 *9,800 *9, m *11800 *11800 *10500 *10500 * *4700 * ' *26,000 *26,000 *23,200 *23,200 *18,700 18,700 *10,300 *10, m *31000 *31000 *22400 *22400 *17800 *17800 * * * *5050 * ' *68,300 *68,300 *49,400 *49,400 *39,200 *39,200 *32,800 31,100 *28,500 23,400 *21,800 17,900 *11,100 *11, m *30200 *30200 *25600 *25600 * * * * *5500 *5500 5' *66,600 *66,600 *56,400 *56,400 *43,500 39,500 *35,600 29,100 *30,200 22,100 *25,100 17,100 *12,200 *12, m *21300 *21300 * * * * *6200 *6000 0' *47,000 *47,000 *61,000 52,300 *46,600 36,800 *37,600 27,400 *31,400 21,000 26,000 16,300 *13,700 *13, m *21600 *21600 * * * * ' *47,600 *47,600 *62,700 49,500 *47,000 33,500 *38,600 26,000 31,800 20,000 25,400 15,700 *15,800 13, m *24900 *24900 * * * * * ' *54,900 *54,900 *61,600 48,100 *47,800 33,600 *38,300 25,100 31,100 19,400 *24,400 15,400 *19,000 14, m *30250 *30250 * * * * * ' *66,700 *66,700 *58,000 47,600 *45,400 33,100 *36,300 24,700 *29,100 19,200 *24,000 16, m *30350 *30350 * * * * ' *66,900 *66,900 *51,400 48,000 *40,500 33,200 *31,900 24,800 *24,600 19, m *23700 *23700 *18550 *18550 *14400 *14400 *10750 * ' *52,300 *52,300 *40,900 *40,900 *31,800 *31,800 *23,700 *23,700 Ratings are based on SAE Standard No. J1097. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load. *Load is limited by hydraulic capacity rather than tipping. TRANSPORTATION GUIDE 4-Kit Transportation Type Implements Upper Structure Undercarriage Others Counterweight FOPS Catwalk Others Model PC kg 37,400 lb kg 52,250 lb kg x 2 24,800 lb kg 27,800 lb PC750SE kg 39,400 lb kg 52,250 lb kg x 2 24,800 lb kg 27,800 lb PC750LC kg 37,400 lb kg 52,250 lb kg x 2 28,800 lb kg 27,800 lb 3-Kit Transportation Type Implements Base Machine Others Counterweight FOPS Catwalk Others Model PC kg 37,400 lb kg 101,850 lb kg 27,800 lb PC750SE kg 39,400 lb kg 101,850 lb kg 27,800 lb PC750LC kg 37,400 lb kg 101,850 lb kg 27,800 lb 15

16 STANDARD EQUIPMENT Air cleaner, double element Air conditioner, 20,000 btu; heater, 39,400 btu Alternator, 75 A/24 V AM/FM radio Arm/boom holding valve Auto deceleration Auto warm-up Batteries, 220 Ah/2 x 12 V Cab which includes antenna, ashtray, cigarette lighter, floormat, front windshield wiper, storage box, suspension seat, and 3" seat belt Catwalk Controls, wrist type Counterweight, kg 26,450 lb Dustproof net for radiator Electronic controller Guard, fan Heavy lift system Inline filters, 2 Lights, 4 cab, RH, 2 boom Overheat prevention Pump/engine room partition Rearview mirror, RH and LH Shoes: PC750, 810 mm 32" double grouser PC750LC, 810 mm 32" double grouser Starting motor, 11 kw Swing holding brake Swing/boom priority mode Track, guiding guard Travel alarm Turbocharger cover Vandalism protection provision tabs Variable track gauge Working modes, 3 OPTIONAL EQUIPMENT Additional service valve Bucket linkage kits Counterweight, 9000 kg 19,842 lb with counterweight removal device Shoes: 600 mm 24" double grouser 910 mm 36" double grouser 1010 mm 40" double grouser (LC) 1110 mm 44" double grouser (LC) OPG, Operator Protective Guard, (ISO) level 2 Track roller guards, full length Boom assembly: 7100 mm 23'4" SE 8200 mm 26'11" Arm assembly: 2945 mm 9'8" SE 3600 mm 11'10" 4600 mm 15'1" 5600 mm 18'4" SOLD ONLY WITH BUCKET: Lug bushing Play adjustment mechanism Komatsu "H" Series buckets AESS Komatsu Printed in USA DK09(3M) TP DataKom 09/02 (EV-1) Komatsu America International Company 440 N. Fairway Dr., Vernon Hills, IL Materials and specifications are subject to change without notice is a trademark of Komatsu Ltd. Japan

PC270LC-6. NET HORSEPOWER 130 kw 174 HP OPERATING WEIGHT kg 62,830 65,035 lb HYDRAULIC EXCAVATOR PC270LC-6

PC270LC-6. NET HORSEPOWER 130 kw 174 HP OPERATING WEIGHT kg 62,830 65,035 lb HYDRAULIC EXCAVATOR PC270LC-6 PC270LC-6 NET HORSEPOWER 130 kw 174 HP OPERATING WEIGHT 28500 29500 kg 62,830 65,035 lb PC270LC-6 HYDRAULIC EXCAVATOR PC270LC-6 Hydraulic Excavator WALK-AROUND Komatsu distributors own the reputation of

More information

HYDRAULIC EXCAVATOR. PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine

HYDRAULIC EXCAVATOR. PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine NET HORSEPOWER 66.2 kw 89 HP @ 2200 rpm OPERATING WEIGHT 12600 12871 kg 27,780 28,375 lb PC120-6 PC120LC-6 With Tier 2 SAA4D102E-2 Engine BUCKET CAPACITY 0.34 0.70 m 3 0.44 0.92 yd 3 HYDRAULIC EXCAVATOR

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

PC300LC-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 71,474 74,803 lb HYDRAULIC EXCAVATOR PC300LC-6

PC300LC-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 71,474 74,803 lb HYDRAULIC EXCAVATOR PC300LC-6 PC300LC-6 FLYWHEEL HORSEPOWER 173 kw 232 HP @ 1750 rpm OPERATING WEIGHT 32420 33930 kg 71,474 74,803 lb PC300LC-6 HYDRAULIC EXCAVATOR PC300LC-6 Hydraulic Excavator WALK-AROUND The PC300 follows the strategy

More information

PC600LC-6. NET HORSEPOWER 286 kw 384 HP OPERATING WEIGHT kg 131, ,160 lb HYDRAULIC EXCAVATOR PC600LC-6

PC600LC-6. NET HORSEPOWER 286 kw 384 HP OPERATING WEIGHT kg 131, ,160 lb HYDRAULIC EXCAVATOR PC600LC-6 PC600LC-6 NET HORSEPOWER 286 kw 384 HP OPERATING WEIGHT 59600 60400 kg 131,393 133,160 lb PC600LC-6 HYDRAULIC EXCAVATOR PC600LC-6 Series Hydraulic Excavator WALK-AROUND Komatsu excavators own the reputation

More information

PC300HD-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 78,860 80,755 lb HYDRAULIC EXCAVATOR PC300HD-6

PC300HD-6. FLYWHEEL HORSEPOWER 173 kw rpm OPERATING WEIGHT kg 78,860 80,755 lb HYDRAULIC EXCAVATOR PC300HD-6 PC300HD-6 FLYWHEEL HORSEPOWER 173 kw 232 HP @ 1750 rpm OPERATING WEIGHT 35770 36630 kg 78,860 80,755 lb PC300HD-6 HYDRAULIC EXCAVATOR PC300HD-6 Hydraulic Excavator WALK-AROUND The PC300 follows the strategy

More information

PC600LC-6. NET HORSEPOWER 287 kw 385 HP OPERATING WEIGHT kg 131, ,160 lb WITH SA6D140E-3 KOMATSU ENGINE HYDRAULIC EXCAVATOR

PC600LC-6. NET HORSEPOWER 287 kw 385 HP OPERATING WEIGHT kg 131, ,160 lb WITH SA6D140E-3 KOMATSU ENGINE HYDRAULIC EXCAVATOR WITH SA6D140E-3 KOMATSU ENGINE NET HORSEPOWER 287 kw 385 HP OPERATING WEIGHT 59600 60400 kg 131,393 133,160 lb HYDRAULIC EXCAVATOR Series Hydraulic Excavator WALK-AROUND Komatsu excavators own the reputation

More information

PC750LC-6 PC750LC-6 MATERIAL HANDLER. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 196, ,700 lb REACH

PC750LC-6 PC750LC-6 MATERIAL HANDLER. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 196, ,700 lb REACH PC750LC-6 MATERIAL HANDLER NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT 89062-92396 kg 196,350 203,700 lb REACH 16.7-18.9 m 55' - 62' Note: For standard specifications and features, refer to the Komatsu

More information

HYDRAULIC EXCAVATOR PC160LC-7. With Tier 3 Engine. FLYWHEEL HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,640 37,790 lb

HYDRAULIC EXCAVATOR PC160LC-7. With Tier 3 Engine. FLYWHEEL HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,640 37,790 lb FLYWHEEL HORSEPOWER 86 kw 115 HP @ 2200 rpm OPERATING WEIGHT 16620 17140 kg 36,640 37,790 lb PC160LC-7 With Tier 3 Engine BUCKET CAPACITY 0.37 0.95 m 3 0.48 1.24 yd 3 PC 160 LC Photo may include optional

More information

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier

FORESTRY MACHINE PC200LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier NET HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 28610 kg 63,074 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type, Processor/Delimber Carrier PC 200 LL FORESTRY MACHINE Local

More information

HYDRAULIC EXCAVATOR PC228USLC-3 228US. FLYWHEEL HORSEPOWER 107 kw rpm OPERATING WEIGHT kg 50,070 51,280 lb

HYDRAULIC EXCAVATOR PC228USLC-3 228US. FLYWHEEL HORSEPOWER 107 kw rpm OPERATING WEIGHT kg 50,070 51,280 lb FLYWHEEL HORSEPOWER 107 kw 143 HP @ 1950 rpm OPERATING WEIGHT 22710 23260 kg 50,070 51,280 lb WITH E.M.M.S BUCKET CAPACITY 0.50 1.52 m 3 0.65 2.0 yd 3 PC 228US LC Photo may include optional equipment.

More information

FORESTRY MACHINE PC300LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top

FORESTRY MACHINE PC300LL-7. Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top NET HORSEPOWER 180 kw 242 HP @ 1900 rpm OPERATING WEIGHT 42941 kg 94,669 lb Purpose Built Forestry Machine Road Builder, Log Loader Heel Type and Butt -N- Top PC 300 LL FORESTRY MACHINE Local option included

More information

FLYWHEEL HORSEPOWER 125 kw rpm OPERATING WEIGHT kg 52,780 55,189 lb BUCKET CAPACITY m

FLYWHEEL HORSEPOWER 125 kw rpm OPERATING WEIGHT kg 52,780 55,189 lb BUCKET CAPACITY m FLYWHEEL HORSEPOWER 125 kw 168 HP @ 2000 rpm OPERATING WEIGHT 23940 25033 kg 52,780 55,189 lb BUCKET CAPACITY 0.48 1.74 m 3 0.63 2.20 yd 3 HYDRAULIC EXCAVATOR Photo may include optional equipment. Series

More information

EQUIPMENT OPERATING WEIGHT

EQUIPMENT OPERATING WEIGHT PC300-8 PC300LC-8 FLYWHEEL HORSEPOWER Gross: 194 kw 260 HP @ 1950 rpm Net: 184 kw 246 HP @ 1950 rpm OPERATING WEIGHT PC300-8: 31100 32010 kg 68,560 70,570 lb PC300LC-8: 31600 32580 kg 69,670 71,830 lb

More information

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0 GROSS HORSEPOWER 110 KW 147 HP NET HORSEPOWER 103 KW 138 HP OPERATING WEIGHT 23,350 kg MAX HORIZONTAL REACH 15,240 mm Super Long Front PC 210 HYDRAULIC EXCAVATOR H Y D R A U L I C E X C A V A T O R WALK

More information

FLYWHEEL HORSEPOWER 180 kw rpm OPERATING WEIGHT kg 80,989 82,239 lb BUCKET CAPACITY m

FLYWHEEL HORSEPOWER 180 kw rpm OPERATING WEIGHT kg 80,989 82,239 lb BUCKET CAPACITY m FLYWHEEL HORSEPOWER 180 kw 242 HP @ 1900 rpm OPERATING WEIGHT 36736 37303 kg 80,989 82,239 lb BUCKET CAPACITY 0.88 2.33 m 3 1.15 3.05 yd 3 Photo may include optional equipment. HYDRAULIC EXCAVATOR PC300HD-7

More information

COMPACT HYDRAULIC EXCAVATOR PC70-8

COMPACT HYDRAULIC EXCAVATOR PC70-8 PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP / 1950 min -1 Net: 48.5 kw 65 HP / 1950 min -1 OPERATING WEIGHT 6590 kg BUCKET CAPACITY 0.30-0.37m 3 PC 70 Photos may include optional equipment. COMPACT

More information

Hydraulic Excavator PC750LC-7 PC750SE-7 PC750LC/SE-7

Hydraulic Excavator PC750LC-7 PC750SE-7 PC750LC/SE-7 PC750LC-7 PC750SE-7 NET HORSEPOWER 338 kw 454 HP @ 1.800 rpm OPERATING WEIGHT PC750LC-7: 80.645-83.760 kg PC750SE-7: 76.245-78.660 kg BUCKET CAPACITY 3,6-6,0 m³ PC 750 Hydraulic Excavator PC750LC/SE-7

More information

COMPACT HYDRAULIC EXCAVATOR PC70-8

COMPACT HYDRAULIC EXCAVATOR PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP / 1950 min -1 Net: 48.5 kw 65 HP / 1950 min -1 OPERATING WEIGHT 6590 kg BUCKET CAPACITY 0.30-0.37m 3 PC 70 Photos may include optional equipment. COMPACT HYDRAULIC

More information

FLYWHEEL HORSEPOWER 246 kw rpm. OPERATING WEIGHT PC450-7: kg 94,800 95,720 lb PC450LC-7: kg 97,000 97,990 lb

FLYWHEEL HORSEPOWER 246 kw rpm. OPERATING WEIGHT PC450-7: kg 94,800 95,720 lb PC450LC-7: kg 97,000 97,990 lb FLYWHEEL HORSEPOWER 246 kw 330 HP @ 1850 rpm PC450LC-7 OPERATING WEIGHT : 43000 43420 kg 94,800 95,720 lb PC450LC-7: 44000 44450 kg 97,000 97,990 lb PC 450 WALK-AROUND Harmony with Environment Low emission

More information

PC NET HORSEPOWER 68 kw rpm OPERATING WEIGHT kg 27,700 lb. BUCKET CAPACITY m yd 3

PC NET HORSEPOWER 68 kw rpm OPERATING WEIGHT kg 27,700 lb. BUCKET CAPACITY m yd 3 NET HORSEPOWER 68 kw 92 HP @ 2200 rpm OPERATING WEIGHT 12560 kg 27,700 lb PC130-8 BUCKET CAPACITY 0.18 0.6 m 3 0.24 0.78 yd 3 PC 130 Photo may include optional equipment. HYDRAULIC EXCAVATOR PC130-8 H

More information

PC600LC-8 MATERIAL HANDLER. NET HORSEPOWER 320 kw 429 1,800 rpm OPERATING WEIGHT kg 145, ,586 lb REACH

PC600LC-8 MATERIAL HANDLER. NET HORSEPOWER 320 kw 429 1,800 rpm OPERATING WEIGHT kg 145, ,586 lb REACH MATERIAL HANDLER NET HORSEPOWER 320 kw 429 HP @ 1,800 rpm OPERATING WEIGHT 66083 67399 kg 145,686 148,586 lb REACH 16.8 18.3 m 55' 60' PC 600 LC Photos may include optional equipment MATERIAL HANDLER M

More information

PC600LC-8. FLYWHEEL HORSEPOWER 320 kw rpm OPERATING WEIGHT kg 126, ,280 lb

PC600LC-8. FLYWHEEL HORSEPOWER 320 kw rpm OPERATING WEIGHT kg 126, ,280 lb FLYWHEEL HORSEPOWER 320 kw 429 HP @ 1800 rpm OPERATING WEIGHT 57300 60000 kg 126,320 132,280 lb PC600LC-8 UCKET CAPACITY 1.57 3.81 m 3 2.05 4.98 yd 3 PC 600 LC Photo may include optional equipment. HYDRAULIC

More information

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN STANDARD EQUIPMENT Alternator, 0 Ampere, 4V Anti-slip plates Auto-decel Automatic engine warm-up system atteries, 1 Ah/ x 1V oom holding valve ROPS cab (ISO 1117-) Corrosion resistor Counterweight Dry

More information

HYDRAULIC EXCAVATOR PC130-8

HYDRAULIC EXCAVATOR PC130-8 HORSEPOWER Gross: 72.1 kw 96.6 HP @ 2200 rpm Net: 68.4 kw 91.7 HP @ 2200 rpm OPERATING WEIGHT 12380 12740 kg 27,300 28,100 lb BUCKET CAPACITY 0.18 0.6 m 3 0.24 0.78 yd 3 PC 130 Photo may include optional

More information

HYDRAULIC EXCAVATOR PC800-8E0 BACKHOE PC800-8E0 LOADING SHOVEL

HYDRAULIC EXCAVATOR PC800-8E0 BACKHOE PC800-8E0 LOADING SHOVEL PC800-8E0 BACKHOE PC800-8E0 LOADING SHOVEL HORSEPOWER Gross: 370 kw 496 HP @ 1800 rpm Net: 363 kw 487 HP @ 1800 rpm OPERATING WEIGHT Backhoe: 74500 78110 kg 164,240 172,200 lb Loading shovel: 77300 kg

More information

HYDRAULIC EXCAVATOR PC700LC-8R BACKHOE

HYDRAULIC EXCAVATOR PC700LC-8R BACKHOE HORSEPOWER Gross:323 kw 433 HP @ 1800 rpm Net:320 kw 429 HP @ 1800 rpm OPERATING WEIGHT 65700 67800 kg 144,840 149,470 lb BACKHOE PC 700 LC Photo may include optional equipment. WALK-AROUND Productivity

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8 PC00-8 PC00LC-8 FLYWHEEL HORSEPOWER Gross: 116 kw 155 HP @ 000 rpm Net: 110 kw 148 HP @ 000 rpm OPERATING WEIGHT PC00-8: 19400 0010 kg 4,770 44,110 lb PC00LC-8: 0630 1460 kg 45,480 47,310 lb PC 00 Photo

More information

D58E-1 D58P-1. HORSEPOWER 130 HP 97 kw. BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 CRAWLER D58-1 DOZER D58-1

D58E-1 D58P-1. HORSEPOWER 130 HP 97 kw. BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 CRAWLER D58-1 DOZER D58-1 D58E-1 D58P-1 HORSEPOWER 130 HP 97 kw BLADE CAPACITY Up to 4.2 yd 3 3.2m 3 D58-1 CRAWLER D58-1 DOZER D58E-1, D58P-1 CRAWLER DOZER Flywheel Horsepower: 130 HP 97 kw @ 1900 RPM Operating Weight: D58E-1:

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

EU Stage IV Engine HYDRAULIC EXCAVATOR BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 123 kw / rpm. max.

EU Stage IV Engine HYDRAULIC EXCAVATOR BUCKET CAPACITY OPERATING WEIGHT ENGINE POWER kg. 123 kw / rpm. max. EU Stage IV Engine HYDRAULIC EXCAVATOR ENGINE POWER 123 kw / 165 HP @ 2.000 rpm OPERATING WEIGHT 22.400-23.030 kg BUCKET CAPACITY max. 1,38 m³ Walk-Around ENGINE POWER 123 kw / 165 HP @ 2.000 rpm OPERATING

More information

PC3000. PC3000 Super Shovel HYDRAULIC SHOVEL. OPERATING WEIGHT ton 551, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped

PC3000. PC3000 Super Shovel HYDRAULIC SHOVEL. OPERATING WEIGHT ton 551, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped OPERATING WEIGHT 250 258 ton 551,500 569,000 lb SHOVEL CAPACITY 15 m 3 19.5 yd 3 SAE 2:1 heaped PC3000 Super Shovel BACKHOE CAPACITY 15 m 3 19.5 yd 3 SAE 1:1 heaped HYDRAULIC SHOVEL PC3000 PC3000 Super

More information

PC800LC-8 MATERIAL HANDLER. NET HORSEPOWER 363 kw rpm OPERATING WEIGHT kg 193, ,955 lb REACH

PC800LC-8 MATERIAL HANDLER. NET HORSEPOWER 363 kw rpm OPERATING WEIGHT kg 193, ,955 lb REACH MATERIAL HANDLER NET HORSEPOWER 363 kw 487 HP @ 1800 rpm OPERATING WEIGHT 87796 89339 kg 193,555 196,955 lb REACH 16.8 20.7 m 55' 68' PC 800 LC Photos may include optional equipment MATERIAL HANDLER M

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

Super Long Front PC240LC-7 PC240NLC-7 PC240LC/NLC-7

Super Long Front PC240LC-7 PC240NLC-7 PC240LC/NLC-7 NET HORSEPOWER 125 kw 168 HP @ 2.000 rpm OPERATING WEIGHT 26.119 kg - 29.634 kg MAX. HORIZONTAL REACH 18.250 mm PC240LC-7 PC240NLC-7 PC 240 Super Long Front PC240LC/NLC-7 PC240-7 H YDRAULIC EXCAVATOR WALK-AROUND

More information

D41E-6 D41P-6. HORSEPOWER 105 HP 78 kw BLADE CAPACITY 3.4 yd m 3 CRAWLER DOZER D41-6

D41E-6 D41P-6. HORSEPOWER 105 HP 78 kw BLADE CAPACITY 3.4 yd m 3 CRAWLER DOZER D41-6 D41E-6 HORSEPOWER 105 HP 78 kw BLADE CAPACITY 3.4 yd 3 2.6 m 3 CRAWLER DOZER D41-6 H i g h P r o d u c t i v i t y Powerful, Fuel-Efficient Engine: The Komatsu S6D102E engine is a fuelefficient, direct-injection

More information

HYDRAULIC EXCAVATOR PC850-8R1 BACKHOE

HYDRAULIC EXCAVATOR PC850-8R1 BACKHOE STANDARD EQUIPMENT ENGINE AND RELATED ITEMS: Air cleaner, double element, dry Engine, Komatsu SAA6D140E-5 Variable speed cooling fan, with fan guard ELECTRICAL SYSTEM: Alternator, 60 amp, 4 V Auto decelerator

More information

PC LC. NET HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,770 37,740 lb BUCKET CAPACITY m

PC LC. NET HORSEPOWER 86 kw rpm OPERATING WEIGHT kg 36,770 37,740 lb BUCKET CAPACITY m NET HORSEPOWER 86 kw 115 HP @ 2200 rpm OPERATING WEIGHT 16680 17120 kg 36,770 37,740 lb PC160LC-8 BUCKET CAPACITY 0.37 0.95 m 3 0.48 1.24 yd 3 PC 160 LC HYDRAULIC EXCAVATOR Photo may include optional equipment.

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

CRAWLER EXCAVATOR SERIES PC600-6

CRAWLER EXCAVATOR SERIES PC600-6 RWLER EXVTOR SERIES P600-6 The machine shown may vary according to territory specifications The P600-6 is a state of the art European made excavator, setting new standards for cycle times, operator comfort,

More information

FLYWHEEL HORSEPOWER 485 kw rpm OPERATING WEIGHT kg 235, ,560 lb HYDRAULIC EXCAVATOR

FLYWHEEL HORSEPOWER 485 kw rpm OPERATING WEIGHT kg 235, ,560 lb HYDRAULIC EXCAVATOR FLYWHEEL HORSEPOWER 485 kw 651 HP @ 1800 rpm OPERTING WEIGHT 106700 113200 kg 235,270 249,560 lb HYDRULIC EXCVTOR PC1250-7 Series Hydraulic Excavator WLK-ROUND Protected hydraulic circuit The cool-running

More information

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34. 922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,

More information

HYDRAULIC EXCAVATOR PC450-8 PC450LC-8

HYDRAULIC EXCAVATOR PC450-8 PC450LC-8 HORSEPOWER Gross: 270 kw 362 HP / 1900 min -1 Net: 257 kw 345 HP / 1900 min -1 OPERATING WEIGHT : 43400 43820 kg PC450LC-8: 44400 44850 kg PC450LC-8 PC 450 Photo may include optional equipment. HYDRAULIC

More information

COMPACT HYDRAULIC EXCAVATOR

COMPACT HYDRAULIC EXCAVATOR PC88MR-8 HORSEPOWER Gross: 0.7 kw 68 HP @ 190 rpm Net: 9 kw 6 HP @ 190 rpm OPERATING WEIGHT 822 839 kg 18,10 18,10 lb BUCKET CAPACITY 0.09 0.3 m 3 0.12 0. yd 3 PC 88MR Photo may include optional equipment.

More information

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN

HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN STANDARD EQUIPMENT Alternator, 0 Ampere, 4V Anti-slip plates Auto-decel Automatic engine warm-up system atteries, 110 Ah/ x 1V oom holding valve Corrosion resistor Counterweight, 90kg 0,330lb Dry type

More information

TOUGH WORLD. TOUGH EQUIPMENT.

TOUGH WORLD. TOUGH EQUIPMENT. Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E

More information

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) 925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator

More information

PC270LC-8. With Tier 3 Engine. NET HORSEPOWER 140 kw rpm OPERATING WEIGHT kg 65,336 67,393 lb

PC270LC-8. With Tier 3 Engine. NET HORSEPOWER 140 kw rpm OPERATING WEIGHT kg 65,336 67,393 lb NET HORSEPOWER 140 kw 187 HP @ 2050 rpm OPERATING WEIGHT 29636 30569 kg 65,336 67,393 lb PC270LC-8 With Tier 3 Engine BUCKET CAPACITY 0.58 1.63 m 3 0.76 2.13 yd 3 PC 270 LC Photo may include optional equipment

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

COMPACT HYDRAULIC EXCAVATOR

COMPACT HYDRAULIC EXCAVATOR OPERATING WEIGHT,780 kg 3,20 lb 2,55 kg,750 lb 2,80 kg 6,3 lb 3, kg 6,20 lb 3,575 kg 7,880 lb,755 kg 0,80 lb 5,60 kg,380 lb COMPACT HYDRAULIC EXCAVATOR C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND OPERATING

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,8 m³ PC130-7 HYDRAULIC EXCAVATOR PC130-7

NET HORSEPOWER 66 kw rpm OPERATING WEIGHT kg BUCKET CAPACITY max. 0,8 m³ PC130-7 HYDRAULIC EXCAVATOR PC130-7 NET HORSEPOWER 66 kw 88 HP @ 2.200 rpm OPERATING WEIGHT 13.000 kg BUCKET CAPACITY max. 0,8 m³ PC 130 H YDRAULIC EXCAVATOR WALK-AROUND The is a rugged, productive, all-european machine. Designed and expressly

More information

350LC-8 HYDRAULIC EXCAVATOR. Australian Specification

350LC-8 HYDRAULIC EXCAVATOR. Australian Specification FLYWHEEL HORSEPOWER Gross: 194 kw 260 HP @ 190 rpm Net: 184 kw 246 HP @ 190 rpm OPERATING WEIGHT PC30LC-8: 3,600 36,80 kg PC30LC-8 Australian Specification PC 30LC-8 Photo may include optional equipment.

More information

NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC35MR-3 PC 35MR. Photo may include optional equipment.

NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC35MR-3 PC 35MR. Photo may include optional equipment. NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC 35MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance and Versatility

More information

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8

HYDRAULIC EXCAVATOR PC200-8 PC200LC-8 FLYWHEEL HORSEPOWER Gross: 110 kw 147 HP / 2000 min -1 Net: 103 kw 138 HP / 2000 min -1 OPERATING WEIGHT PC200-8M0: 19800 20500 kg PC200LC-8M0: 20700 21700 kg PC200-8 PC200LC-8 PC 200 HYDRAULIC EXCAVATOR

More information

PC270-8 HYDRAULIC EXCAVATOR CEN

PC270-8 HYDRAULIC EXCAVATOR CEN FLYWHEEL HORSEPOWER Gross:19 kw 00 HP @ 00 rpm Net:10 kw 1 HP @ 00 rpm OPERATING WEIGHT 10 00 kg 9,0 1,0 lb PC0- PC 0 www.komatsu.com Printed in Japan 000 IP.As(10) Photo may include optional equipment.

More information

HYDRAULIC EXCAVATOR PC800LC-8. With Tier 3 Engine

HYDRAULIC EXCAVATOR PC800LC-8. With Tier 3 Engine PC800LC-8 With Tier 3 Engine FLYWHEEL HORSEPOWER 363 kw 487 HP @ 1800 rpm OPERTING WEIGHT 81400 87200 kg 179,400 192,240 lb UCKET CPCITY 1.70-4.53 m 3 2.23-5.93 yd 3 PC 800 LC Photo may include optional

More information

HYDRAULIC EXCAVATOR COMPACT PC70-8

HYDRAULIC EXCAVATOR COMPACT PC70-8 FLYWHEEL HORSEPOWER Gross: 50.7 kw 68 HP @ 1950 min -1 Net: 48.5 kw 65 HP @ 1950 min -1 OPERATING WEIGHT 6500 kg BUCKET CAPACITY 0.3-0.37m 3 PC 70 www.komatsu.com Printed in Japan 201106 IP.As Photo may

More information

HYDRAULIC EXCAVATOR HB335/335LC-1 HB365/365LC-1. Preliminary. HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1

HYDRAULIC EXCAVATOR HB335/335LC-1 HB365/365LC-1. Preliminary. HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1 HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1 H335/335LC-1 H365/365LC-1 Preliminary OPERTING WEIGHT H335-1: 32200-33100 kg H335LC-1: 33500-34500 kg H365-1: 34400-34700

More information

HYDRAULIC EXCAVATOR PC138US-8 138US. HORSEPOWER Gross: 72.1 kw rpm Net: 68.4 kw rpm

HYDRAULIC EXCAVATOR PC138US-8 138US. HORSEPOWER Gross: 72.1 kw rpm Net: 68.4 kw rpm HORSEPOWER Gross: 72.1 kw 96.6 HP @ 2200 rpm Net: 68.4 kw 91.7 HP @ 2200 rpm OPERATING WEIGHT 13480 13850 kg 29,720 30,540 lb BUCKET CAPACITY PC138US-8 0.18 0.6 m 3 0.24 0.78 yd 3 PC 138US Photo may include

More information

Doosan Infracore DX225LL TECHNICAL DATA

Doosan Infracore DX225LL TECHNICAL DATA Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)

More information

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more

More information

PC270-7 HYDRAULIC EXCAVATOR. FLYWHEEL HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 59,300 61,310 lb

PC270-7 HYDRAULIC EXCAVATOR. FLYWHEEL HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 59,300 61,310 lb FLYWHEEL HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 26900 27810 kg 59,300 61,310 lb PC270-7 UCKET CAPACITY 1.26 m 3 1.65 yd 3 PC 270 PC270-7 WALK-AROUND PC270-7 Hydraulic Excavator uilding on

More information

HYDRAULIC EXCAVATOR PC BACKHOE PC LOADINGSHOVEL

HYDRAULIC EXCAVATOR PC BACKHOE PC LOADINGSHOVEL BACKHOE LOADINGSHOVEL HORSEPOWER Gross: 728 kw 976 HP @ 1800 rpm Net: 713 kw 956 HP @ 1800 rpm OPERATING WEIGHT Backhoe: 200000 204120 kg 440,920 450,000 lb Loading shovel: 195000 kg 429,900 lb PC 2000

More information

HYDRAULIC SHOVEL. PC Super Shovel. OPERATING WEIGHT ton 556, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped

HYDRAULIC SHOVEL. PC Super Shovel. OPERATING WEIGHT ton 556, ,000 lb SHOVEL CAPACITY 15 m yd 3 SAE 2:1 heaped OPERATING WEIGHT 252-265 ton 556,000-584,000 lb SHOVEL CAPACITY 15 m 3 19.5 yd 3 SAE 2:1 heaped PC3000-6 Super Shovel BACKHOE CAPACITY 15 m 3 19.5 yd 3 SAE 1:1 heaped PC 3000 HYDRAULIC SHOVEL Photo may

More information

EC460 VOLVO EXCAVATOR LONG CRAWLER

EC460 VOLVO EXCAVATOR LONG CRAWLER VOLVO EXCAVATOR EC460 LONG CRAWLER Engine power, gross: 239 kw (321 hp) Operating weight: 44.3 ~ 46.0 t Buckets (SAE): 1900 ~ 2300 l Low-emission, turbocharged Cummins diesel engine with direct injection

More information

CRAWLER DOZER. NET HORSEPOWER 79 kw rpm OPERATING WEIGHT D39EX-22: 9040 kg 19,930 lb D39PX-22: 9480 kg 20,900 lb D39PX-22 D39EX-22

CRAWLER DOZER. NET HORSEPOWER 79 kw rpm OPERATING WEIGHT D39EX-22: 9040 kg 19,930 lb D39PX-22: 9480 kg 20,900 lb D39PX-22 D39EX-22 NET HORSEPOWER 79 kw 105 HP @ 2200 rpm OPERATING WEIGHT D39EX-22: 9040 kg 19,930 lb D39PX-22: 9480 kg 20,900 lb D39EX-22 D39PX-22 D 39 C RAWLER D OZER WALK-AROUND All-around visibility Super-slant nose

More information

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51 CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349

More information

NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR. Photo may include optional equipment.

NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR. Photo may include optional equipment. NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. PC18MR-3 C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance

More information

Specifications R220LC-9A / R220NLC-9A

Specifications R220LC-9A / R220NLC-9A Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel

More information

HYDRAULIC EXCAVATOR PC300-8M0 PC300LC-8M0 PC350LC-8M0. Australian - NZ Specification

HYDRAULIC EXCAVATOR PC300-8M0 PC300LC-8M0 PC350LC-8M0. Australian - NZ Specification PC300LC-8M0 Australian - NZ Specification Flywheel Horsepower Gross: 194 kw 260 HP / 1950 min -1 Net: 187 kw 250 HP / 1950 min -1 operating weight : 33400 33900kg PC300LC-8M0: 34200 34700kg : 35800 36600kg

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged

More information

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel

More information

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m) CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

PC130F-7 HYDRAULIC EXCAVATOR 130F FLYWHEEL HORSEPOWER OPERATING WEIGHT kg, lb. 66 kw rpm

PC130F-7 HYDRAULIC EXCAVATOR 130F FLYWHEEL HORSEPOWER OPERATING WEIGHT kg, lb. 66 kw rpm FLYWHEEL HORSEPOWER 66 kw 88 HP @ 2.200 rpm OPERATING WEIGHT 13.975 kg, 30.809 lb PC 130F 200-8 130F Photo may include optional equipment. HYDRAULIC EXCAVATOR H YDRAULIC E XCAVATOR WALK-AROUND The hydraulic

More information

FLYWHEEL HORSEPOWER 40,5 kw / rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,28 m³ PC78MR-6 78MR-6. Midi-Excavator PC78MR-6

FLYWHEEL HORSEPOWER 40,5 kw / rpm OPERATING WEIGHT kg BUCKET CAPACITY 0,28 m³ PC78MR-6 78MR-6. Midi-Excavator PC78MR-6 FLYWHEEL HORSEPOWER 40,5 kw / 54 HP @ 1.850 rpm OPERATING WEIGHT 8.270 kg BUCKET CAPACITY 0,28 m³ PC 78MR-6 Midi-Excavator M IDI-EXCAVATOR PRODUCTIVITY FEATURES Tight tail swing Operators can focus more

More information

PC2000 PC Backhoe Loading Shovel. OPERATING WEIGHT Backhoe: 440, ,000 lb kg

PC2000 PC Backhoe Loading Shovel. OPERATING WEIGHT Backhoe: 440, ,000 lb kg -8 Backhoe Loading Shovel HORSEPOWER Gross: 976 HP 728 kw @ 1800 rpm Net: 956 HP 713 kw @ 1800 rpm OPERATING WEIGHT Backhoe: 440,920 450,000 lb 200000 204120 kg OPERATING WEIGHT Loading Shovel: 429,900

More information

308E. Mini Hydraulic Excavator

308E. Mini Hydraulic Excavator 308E Mini Hydraulic Excavator Engine Weights Engine Model Cat C3.3 DI Turbo Operating Weight Standard Stick 7160 kg Net Power @ 2,400 rpm 46.8 kw Operating Weight Long Stick 7190 kg Gross Power @ 2,000

More information

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted CX210C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Fuel Type Cylinders Isuzu AM-4HK1X Tier 4 Interim Certified (Cooled EGR) Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

306E. Mini Hydraulic Excavator. Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg

306E. Mini Hydraulic Excavator. Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg 306E Mini Hydraulic Excavator Engine Weights Engine Model Cat C2.6 (DI Turbo) Operating Weight 5795 kg Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) 306E Features Increased Performance

More information

FLYWHEEL HORSEPOWER 228 kw rpm OPERATING WEIGHT kg 84,440 lb MOBILE CRUSHER. Photos may include optional equipment.

FLYWHEEL HORSEPOWER 228 kw rpm OPERATING WEIGHT kg 84,440 lb MOBILE CRUSHER. Photos may include optional equipment. FLYWHEEL HORSEPOWER 228 kw 306 HP @ 1950 rpm OPERATING WEIGHT 38300 kg 84,440 lb MOBILE CRUSHER Photos may include optional equipment. BR480RG-1 Mobile Crusher WALK-AROUND Komatsu s newly designed BR480RG-1

More information

PC30MR. U.S. EPA Tier 4 Final Engine. Australian-NZ specifications COMPACT HYDRAULIC EXCAVATOR. Printed in Japan IP.As OPERATING WEIGHT

PC30MR. U.S. EPA Tier 4 Final Engine. Australian-NZ specifications COMPACT HYDRAULIC EXCAVATOR. Printed in Japan IP.As OPERATING WEIGHT U.S. EPA Tier 4 Final Engine Australian-NZ specifications https://home.komatsu/en/ Printed in Japan 201711 IP.As PC30MR COMPACT HYDRAULIC EXCAVATOR CEN00798-00 Materials and specifications are subject

More information

EQUIPMENT ENGINE HYDRAULIC SYSTEM

EQUIPMENT ENGINE HYDRAULIC SYSTEM EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2

More information

CRAWLER EXCAVATORS EH160 LC. Specifications.

CRAWLER EXCAVATORS EH160 LC. Specifications. CRAWLER EXCAVATORS Specifications EH160 LC www.newhollandconstruction.com EH160 LC MACHINE DIMENSIONS A M C E I F L G H D K J B Standard Arm Optional Arm Arm Length 10 2 (3.10 m) 8 6 (2.60 m) A. Overall

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged

More information

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,

More information

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal

More information

Undercarriage. Lubricant and Coolant Capacity. Travel System

Undercarriage. Lubricant and Coolant Capacity. Travel System MATERIAL HANDLER Operating Weight: 76,49 lbs (8, kg) SAE Net Horsepower: with fan pump 49 HP (69 kw) without fan pump HP (97 kw) Swing Torque: 96,6 lbf-ft. (66. kn m) Engine Isuzu AH-6WGXYSS- Tier turbocharged

More information

LIUGONG & DEALERS GLOBAL>>>

LIUGONG & DEALERS GLOBAL>>> LIUGONG & DEALERS GLOBAL>>> STRONG PRESENCE, SUBLIME SUPPORT LiuGong has established a solid infrastructure with over 12,000 employees worldwide, 320 dealers, 7 regional parts depots and 9 strategically

More information

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade

More information

Dimensions & Working Range

Dimensions & Working Range We build a better future Dimensions & Working Range R35Z-9 Dimensions With Tier 4 Engine installed mm (ft.in) A B C D E F Overall width of upper structure Overall width of cab Overall height of cab Tail

More information

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt

More information