DOSING UNITS PLASTICOLOR 1500 PLASTICOLOR 2500 PLASTICOLOR 3200 PLASTICOLOR 5000
|
|
- Angela Lawrence
- 6 years ago
- Views:
Transcription
1 DOSING UNITS PLASTICOLOR 1500 PLASTICOLOR 2500 PLASTICOLOR 3200 PLASTICOLOR 5000
2 Function of PLASTICOLOR Dosing Units... 3 PLASTICOLOR PLASTICOLOR PLASTICOLOR PLASTICOLOR PLASTICOLOR Accessories... 8
3 FUNCTION OF PLASTICOLOR DOSING UNITS The PLASTICOLOR neckpiece (2) is mounted between the production machine (1) and the main hopper (5). The PLASTICOLOR screw (4) meters the additive into the main material stream passing through the neckpiece (2). 5 2 The short distance between dosing and actual processing eliminates any risk of material separation Production machine 2 - Neckpiece 3 - PLASTICOLOR dosing unit 4 - Screw 5 - Main hopper CONTROLS FOR PLASTICOLOR DOSING UNITS Serie PC 90/03 Serie PC 90/52 PPM-Control-System PDC-Control-System PLASTICOLOR-Dosing units 3
4 PLASTICOLOR 1500 Area of application: Additives for all processing machines Main materials for small processing machines Dosing capacity: kg/h - (HDPE granules, 4 mm)* Accessories, optional: Manual/pneumatic neckpiece slide Pneumatic quick discharge Level sensors Sensor adapter under hopper Manual hopper slide High capacity insert in the neckpiece Hopper adapter on the neckpiece Screw identification (via the PPM control system) Special seal for processing powder Hopper - Standard: Hopper - Optional: 6 L circular sloped hopper, stainless steel 6 L asymmetrical hopper, aluminium 2 L / 10 L / 20 L circular sloped hopper, stainless steel 2 L / 9 L / 19 L / 21 L / 32 L / 50 L round hopper, stainless steel German Patent Number: DE European Pat.-Nr Countries: AT, BE, CH/LI, DK, ES, FR, GB, IT, NL, PL Screw/cylinder assembly 6/16 yellow Dosing outputs (kg/h)* 8/18 grey 10/20 brown Motor G Motor G * HDPE granules (PE) - lenticular oval, approximately 4 mm x 4.5 mm in diameter and 3.3 mm high with a bulk density of 560 g/l 13/25 red 4 PLASTICOLOR-Dosing units
5 PLASTICOLOR 2500 Area of application: Additives for very large processing machines Main materials for small processing machines Dosing capacity: kg/h - (HDPE granules, 4 mm)* Accessories, optional: Pneumatic neckpiece slide Pneumatic quick discharge Level sensors Sensor adapter under hopper Manual hopper slide High capacity insert in the neckpiece Hopper adapter on the neckpiece Screw identification (via the PPM control system) Special seal for processing powder Hopper - Standard: Hopper - Optional: 20 L circular sloped hopper, stainless steel 20 L asymmetrical hopper, aluminium 10 L / 50 L circular sloped hopper, stainless steel 9 L / 19 L / 21 L / 32 L / 50 L / 70 L round hopper, stainless steel German Patent Number: DE European Pat.-Nr Countries: AT, BE, CH/LI, DK, ES, FR, GB, IT, NL, PL Screw/cylinder assembly 6/16 yellow Dosing outputs (kg/h)* 8/18 grey 10/20 brown * HDPE granules (PE) - lenticular oval, approximately 4 mm x 4.5 mm in diameter and 3.3 mm high with a bulk density of 560 g/l 13/25 red 17/29 green Motor G /34 black PLASTICOLOR-Dosing units 5
6 PLASTICOLOR 3200 Area of application: Main materials for large processing machines Dosing capacity: kg/h - (HDPE granules, 4 mm)* Accessories, optional: Manual/pneumatic neckpiece slide Pneumatic quick discharge Level sensors Sensor adapter under hopper Manual hopper slide High capacity insert in the neckpiece Hopper adapter on the neckpiece Screw identification (via the PPM control system) Special seal for processing powder Hopper - Standard: 50 L circular sloped hopper, stainless steel Hopper - Optional: 50 L asymmetrical hopper, aluminium 20 L circular sloped hopper, stainless steel 21 L / 32 L / 50 L / 70 L / 100 L / 130 L round hopper, stainless steel Dosing outputs (kg/h)* Screw/cylinder 8/17 13/22 17/27 25/36 40/50 assembly yellow brown red green black Motor G Motor G Motor G Motor G * HDPE granules (PE) - lenticular oval, approximately 4 mm x 4.5 mm in diameter and 3.3 mm high with a bulk density of 560 g/l 6 PLASTICOLOR-Dosing units
7 PLASTICOLOR 5000 Area of application: Main materials for very large processing machines specially designed for large quantities, regrind, flakes, etc. Dosing capacity: , kg/h - (HDPE granules, 4 mm)* Accessories, optional: Pneumatic quick discharge Level sensors Manual hopper slide Screw identification (via the PPM control system) Special seal for processing powder Hopper - Standard: Hopper - Optional: 150 L circular hopper, stainless steel 50 L circular sloped hopper, stainless steel 70 L / 100 L / 130 L / 250 L / 350 L / 500 L round hopper, stainless steel German Patent Number: DE European Pat.-Nr Countries: AT, BE, CH/LI, DK, ES, FR, GB, IT, NL, PL Screw/cylinder assembly 50/65 red Dosing outputs (kg/h)* 65/80 green * HDPE granules (PE) - lenticular oval, approximately 4 mm x 4.5 mm in diameter and 3.3 mm high with a bulk density of 560 g/l 80/95 black Motor G , , Motor G , , , Motor G , , , PLASTICOLOR-Dosing units 7
8 THE ADVANTAGES OF THE PLASTICOLOR DOSING UNITS IS TO BE SEEN IN THE PRACTICAL DETAILS PLASTICOLOR QUICK ACTING LATCHES The PLASTICOLOR dosing units can be cleaned very easily thanks to the Quick acting latches. Changing the screws is quick and easy. The pressure bolts ensure a good seal and prevent back pressure on the motor and gears. ROUND MATERIAL INLET The combination of round stainless steel hoppers, round material inlet and round quick discharge ensures a material flow/ cleaning with almost no residue. - = Standard = Optional 8 PLASTICOLOR-Dosing units
9 PLASTICOLOR ROUND SEALING DISC The design of the round sealing disc ensures a perfect flow of material when dosing and also when discharging. - SPECIAL SEAL FOR PROCESSING POWDER A special seal is available for processing powder. = Standard = Optional PLASTICOLOR-Dosing units 9
10 PLASTICOLOR QUICK DISCHARGE with manual slide Very easy discharge of the PLASTI- COLOR dosing units and hoppers thanks to the quick discharge. This allows an quick and troublefree change of colour and change of screw/ cylinder assembly. QUICK DISCHARGE pneumatic The pneumatic quick discharge can be remotely operated, for example for PLASTICOLOR dosing units that are mounted on a platform/gantry or in a high position. NECKPIECE SLIDE Taking a sample via the neckpiece slide. Neckpiece slides secure the units against the neckpiece and make it possible to take samples and conduct volume tests. The units can be filled and emptied during production. - = Standard = Optional 10 PLASTICOLOR-Dosing units
11 PLASTICOLOR NECKPIECE SLIDE pneumatic The pneumatic neckpiece slide facilitates remote opening and closing and thus taking samples remotely. - QUICK DISCHARGE and NECKPIECE SLIDE connecting a hose Using a hose for quick discharge or connecting a hose for taking samples is a practical option for all PLASTICOLOR dosing units that are mounted in a high or inaccessible position. The material can be discharged into a container on the floor. Quick discharge via hose Neckpiece slide taking samples - via hose - = Standard = Optional PLASTICOLOR-Dosing units 11
12 PLASTICOLOR TEST OPENING in the middle of the housing for taking samples Tests for volume control can be done during production via the test slide AUTOMATIC SCREW IDENTIFICATION The combination of a PPM Control, a coded screw coupling and a sensor in the pressure bolt allows a fully automatic screw identification of the screw mounted in the dosing unit. HOPPER SLIDE A hopper slide is being used when changing the screw/cylinder without emptying the hopper. For example when a completely different output with the same material (after changing screw/cylinder) is to be done. = Standard = Optional 12 PLASTICOLOR-Dosing units
13 PLASTICOLOR SENSORS Sensors are used for level control in the hopper and the neckpiece. When processing small amounts of additive or changing materials very frequently, it is helpful to install an adapter for a sensor over the dosing screw. - HIGH CAPACITY INSERT / DEFLECTOR PLATE High capacity inserts for non-pressurised dosing into the main material stream flowing through the neckpiece. HIGH CAPACITY INSERT - - DEFLECTOR PLATE = Standard = Optional PLASTICOLOR-Dosing units 13
14 PLASTICOLOR HOPPER ADAPTER Hopper Adapter for the mounting of a main material hopper on top of the neckpiece. With the Hopper Adapter all hoppers out of the PLASTICOLOR product range will fit, without any steps or restrictions. - CIRCULAR STAINLESS STEEL HOPPER Circular stainless steel hoppers with a round filling area and round discharge ensure an almost residue-free discharge via the quick discharge. - = Standard = Optional 14 PLASTICOLOR-Dosing units
15 MATERIAL FEED HOPPER PLASTICOLOR ASYMMETRICAL HOPPER, ALUMINIUM 6 L 20 L 50 L CIRCULAR SLOPED HOPPER, STAINLESS STEEL ROUND HOPPER, STAINLESS STEEL 2 L 6 L 10 L 20 L 50 L 2 L 9 L 19 L 21 L 32 L 50 L 70 L 100 L 130 L 150 L 250 L, 350 L, 500 L = Standard = Optional PLASTICOLOR-Dosing units 15
16 Woywod production site in Seefeld Woywod Kunststoffmaschinen GmbH & Co. Vertriebs-KG Hauptsitz / Head Office: Bahnhofstraße Gräfelfing Germany Tel.: Fax: Internet: woywod@plasticolor.de Produktion / Factory: Niederlassung Seefeld Lindengasse Werneuchen OT Seefeld Germany Tel.: Fax: woywod.seefeld@plasticolor.de Woywod Kunststoffmaschinen GmbH & Co. Vertriebs-KG
HOPPER LOADER. Serie ITP. Serie ISP. Serie IPL. Serie IPL-P
HOPPER LOADER Serie ITP Serie ISP Serie IPL Serie IPL-P Hopper Loaders type ITP Suitable for: three-phase version for granulate/regrind filter with large filter surface automatic filter cleaning cycle
More informationFor reliable dosing of all granular and free flowing materials.
Dosing units For reliable dosing of all granular and free flowing materials. PLASTICOLOR Units are used for high precision dosing and mixing of all granular and free flowing materials. Various materials
More informationVolumetric Feeders, AccuRate Series
Volumetric Feeders, AccuRate Series Volumetric feeding of bulk solids Feeding without internal agitation Gentle material conditioning Economical and simple integration Compact design Application Feeders
More informationFLEX 70 Powder Metering System for four colors in two mixers with one dust filter
POWDER PIGMENTS POWDER METERING SYSTEM FLEX FLEX Powder Metering System Pneumatic dustfree metering of dry pigment for coloring of all kinds of concrete products. Flexible use of inexpensive powder pigment,
More informationBelt Press KD 12. The presses are high-technology quality products, based upon the experiences from the larger belt press series KD10 og KD11.
Belt Press KD 12 Belt Press KD 12 The belt presses model KD 12-800 / -1200 constitutes a new generation of presses designed and manufactured by Danish Wastewater Equipment A/S, in order to meet the less
More informationHopper Loaders S Series
Hopper Loaders S Series English The design criteria and the construction modalities of these Single-phase Loaders put the S Series at the top of quality and performance. The workmanship, the body entirely
More informationOil-Free Compressed Air for the Pneumatic Conveyance of Bulk Powders and Granulates. passion beyond compression
Oil-Free Compressed Air for the Pneumatic Conveyance of Bulk Powders and Granulates GHH Rand Pioneers with a Passion Passion for technology has been part and parcel of our products for over 50 years. Leading
More informationAutomatic Capsule Filling Equipment SPT Series
EBSEOS GmbH Pharmaceutical Machinery & Services Industriestrasse 14 79664 Wehr Tel. ++49 (0)7762 80 68 966 Fax. ++49 (0)7762 80 68 967 Automatic Capsule Filling Equipment SPT Series Capsule Filling Equipment
More informationVD 1100 THE SOLUTION NEW COMBINED SHREDDER-GRANULATOR
VD 1100 THE SOLUTION NEW COMBINED SHREDDER-GRANULATOR FROM BULK TO GRANULATE WITH A SINGLE MACHINE THE REVOLUTION FOR PLASTIC RECYCLER AND PROCESSORS ONE STEP FOR EFFICIENT PLASTICS REPROCESSING The VD
More informationOK Pipe System. OK Pipe System. Kongskilde OK/OKR/OKD
OK Pipe System OK/OKR/OKD Kongskilde OK Pipe System The OK pipe system is ideal for pneumatic and mechanical conveying and for ventilating applications in both farming and industry. The simple and flexible
More informationBULK SOLIDS FEEDING. Distributor of. Rotary Valve RV RVR RVR
BULK SOLIDS FEEDING Distributor of Rotary Valve RV RVR RV RVR Rotary Valve RV RVR High filling efficiency and precise metering in gravity feeding and pneumatic conveying of products in powder and granules.
More informationRittal console systems...
Rittal console systems...... multi-variable Universal console Optionally with short or tall door. Short door offers free field for mounting desk section (see photograph) or keyboard drawer. High level
More informationIn the event of functional problems, troubleshooting must be L. limited to about 0.5 hours, contact the installers support:
Hyundai I40 Hyundai I40 Hyundai I40 Facelift 05/05- Partnr.: HY-06-DHU Fitting instructions electric wiring kit tow bar with -P socket up to DIN/ISO Norm 446. We would expressly point out that assembly
More informationBinding agent spreader TC series
Technical specification Binding agent spreader TC series SW 10 TC SW 16 TC 02 03 Technical specification Binding agent spreader SW 10 TC Binding agent spreader SW 16 TC Container Container capacity 10
More informationA408 GB. Pneumatic oil and diesel pumps 1:1
03 594 A408 GB Pneumatic oil and diesel pumps 1:1 G Operating instructions for Pneumatic oil and diesel pump 1:1 Contents 1. General details 2 1.1 Intended use 2 1.2 Design and functional description 2
More informationFILTERS, REGULATORS & LUBRICATORS
FILTERS, REGULATORS & LUBRICATORS Infinity filters remove solid particles and condensate produced by the compressor. The range includes standard filters, regulators and lubricators for points of use. OFR
More informationSlow-speed. granulation. Rapid Twin
Slow-speed granulation Rapid 100-22 100-34 Twin Slow speed perfection The Rapid 100-Series is specifi cally designed for beside-the-press recycling of hard and brittle materials. The ultraslow rotor speed
More informationTidal Series 5. Level Control For Dry Bulk Materials
Tidal Series 5 Level Control For Dry Bulk Materials Introduction Members of the Schenck Process Group, Stock Redler Ltd are leading providers of feeding, automation and bulk solids handling solutions.
More informationJesHopper. Supplier for The grain and feed milling industry The food industry The chemical/technical industry
advanced weighers and weighing systems for static, dynamic and continuous weighing JesHopper Supplier for The grain and feed milling industry The food industry The chemical/technical industry JesHopper
More informationBucket Elevator Belt Bucket Conveyor
Bucket Elevator TD belt bucket conveyor is suitable for density less than.5t/m3 lump, granular material such as coal, cement, fertilizer, sand, grain, etc.belt bucket conveyor has two types of bucket:
More informationNIVOCONT R VIBRATING ROD LEVEL SWITCHES
For solids NIVOCONT R VIBRATING ROD LEVEL SWITCHES O U R P R O F E S S I O N I S Y O U R L E V E L LEVEL SWITCHES O U R P R O F E S S NIVOCONT R VIBRATING ROD LEVEL SWITCHES MAIN FEATURES Extension up
More informationAudi A6 Sedan (4G) Audi A7 Sportback (4G) Audi A6 Avant (4G5)
Audi A6 Sedan 0- (G) Audi A7 Sportback 00- (G) Audi A6 Avant 0- (G5) Only for models without towbar preparation Partnr.: AU-056-DU Fitting instructions electric wiring kit tow bar with -P socket up to
More informationIRRIGATION IMPACT SPRINKLERS CATALOGUE 2012
IRRIGATION IMPACT SPRINKLERS CATALOGUE 2012 Tel Aviv-Jaffa, Israel E-mail: argos@argosinvest.net Website: www.argosinvest.net AR044 :: PERFORMANCE DATA full circle, plastic impact sprinkler, 1/2" male
More informationVolumetric Feeders, AccuRate Series
Volumetric Feeders, AccuRate Series Volumetric feeding of bulk solids Feeding without internal agitation Gentle material conditioning Economical and simple integration Compact design Application Feeders
More informationEUGEN WOERNER GmbH & Co. KG Postfach 1661 DE Wertheim Am Eichamt 8 DE Wertheim. Piston pump PMW. Air-actuated multiplunger pump
PMW Air-actuated multiplunger pump Capable of delivering both oil and grease up to consistency class Use: - - As feed pump pneumatic drive As cycle-lubrication system in conjunction spraying nozzles Models:
More informationseries PE-45 Polystyrene plenum boxes
series PE-45 Polystyrene plenum boxes www.koolair.com Series PE-45 1 CONTENTS Description 2 Dimensions and Packing 3 Diffusers coding 4 Mounting Instructions 5 2 Series PE-45 Polystyrene plenum box Description
More informationBulk Solids Feeding. Distributor for. Blow-Through Rotary Valves RVS Drop-Through Rotary Valves RVC
Bulk Solids Feeding Distributor for Blow-Through Rotary Valves RVS Drop-Through Rotary Valves RVC Blow-Through Rotary Valves RVS Drop-Through Rotary Valves RVC High filling efficiency and precise metering
More informationVW Golf VII 5G Limo 10/ /2014 VW Golf VII 5G Variant 08/ /2014
VW Golf VII G Limo 0/0-0/0 VW Golf VII G Variant 08/0-0/0 Only for models without towbar prepared connector Partnr.: AU-06-DU Fitting instructions electric wiring kit tow bar with -P socket up to DIN/ISO
More informationVolkswagen. Caddy Caddy Life Caddy Maxi Caddy
Volkswagen Caddy 00-0 Caddy Life 00-0 Caddy Maxi 008-0 Caddy 0-0 Partnr.: VW-096-DU Fitting instructions electric wiring kit tow bar with -P socket up to DIN/ISO Norm 6. We would expressly point out that
More informationMr. Fill: solar powered, compacting waste bin
Mr. Fill: solar powered, compacting waste bin Mr. Fill: solar powered, compacting waste bin The Problem Standard waste bins are not sufficient enough Standard waste bins overfill and cause high cleaning
More informationPneumatic grease pump 50:1 and grease supply system
Pneumatic grease pump 50:1 and grease supply system 03 591 A411 GB G Operating instructions for Pneumatic grease pump 50:1 Contents 1. General Information 2 1.1 Usage Stipulations 2 1.2 Construction &
More informationavian sales & service Screws l Barrels l Granulators Shredders l Pulverisers Tel: l Fax: l
GRANULATOR Stock S a l e Screws l Barrels l Granulators Shredders l Pulverisers GRANULATOR GL-02 1.5KW (2HP) Low speed granulator 1.5KW (2HP) Electric motor & Gearbox Cutting chamber size 290mm x 240mm
More informationADAPTA THE EVOLVING CAPSULE FILLER
ADAPTA THE EVOLVING CAPSULE FILLER ADAPTA The Adapta s DNA has its roots in IMA s 50 years of experience and more than 5,000 capsule filling installations world-wide. This knowledge and experience have
More informationhps Accessories Bench and Demonstration Racks Mechanical Accessories
hps Accessories Bench and Demonstration Racks Mechanical Accessories hps SystemTechnik Lehr- + Lernmittel GmbH Altdorfer Strasse 16 88276 Berg / Germany Phone: + 49 751 /5607580 Telefax: + 49 751 /5607517
More informationUltrablend UB 975. Dosing and Blending: Gravimetric Dosing Systems. Description. Rugged, modular construction
170 / T Esc Run Enter Stop U 75 Typical application of a gravimetrich batch blender. Gravimetric atch lender osiersteuerung Printer Host omponent is described below. escription olortronic's gravimetric
More informationGB. SIMATEK UNIVERSALELEVATOR Capacity BULK SYSTEMS A/S. X, Y, Z : The measurement are in Meters
SIMATEK UNIVERSALELEVATOR Capacity Filling Zone 1 =62% Filling Zone 2 =70% Construction form "A", "B", "D1", "H", "T1" Construction form "C", "D2", "T2" Chain- Chain- Type Gear speed Kap. Type Gear speed
More informationSafety Shut-off Valve SL/SID/RSL
Safety Shut-off Valve SL/SID/RSL High accuracy shut-off Low pressure loss Operating temperature up to -30 C Easy maintenance DVGW-approval Applications They are designed for transmission and distribution
More informationVibratory Conveyors. Trough conveyors Tube conveyors. with electric motor vibrators or electromagnetic drive
Vibratory Conveyors Trough conveyors Tube conveyors with electric motor vibrators or electromagnetic drive VIBRA MASCHINENFABRIK SCHULTHEIS GmbH & Co. Im großen Ahl 47-51 D-63075 Offenbach am Main Tel.
More informationIn the event of functional problems, troubleshooting must be. limited to about 0.5 hours, contact the installers support:
SET ltea 00- & 009-0 SET ltea Free Track 007- & 009-0 SET ltea L 006- & 009-0 SET Toledo 00-0 SET Leon 00- & 009-0 Partnr.: VW-6-DU Fitting instructions electric wiring kit tow bar with -P socket up to
More informationIn the event of functional problems, troubleshooting must be L. limited to about 0.5 hours, contact the installers support:
Volkswagen Passat Sedan 00-00 & 0-0 Volkswagen Passat Variant 00-00 & 0-0 Volkswagen Passat CC 008-0 Volkswagen CC 0Partnr.: VW-096-DU Fitting instructions electric wiring kit tow bar with -P socket up
More informationErsatzteilekatalog Nurmi Spare Parts Catalog Nurmi
Ersatzteilekatalog Nurmi Spare Parts Catalog Nurmi Grunddaten Bitte geben Sie bei allen Ersatzteilbestellungen die folgenden Grunddaten an, um eine reibungslose Lieferung zu gewährleisten: ) Serien-Nr.
More informationSyntron Pneumatic Vibrators
Pneumatic Vibrators Syntron Pneumatic Vibrators Syntron Material Handling offers two types of Syntron Pneumatic Vibrators turbine and piston. Turbine models feature rotary action designed to keep noise
More informationLINEAR fireplace inserts Open fireplaces shine in a new splendour
LINEAR fireplace inserts Open fireplaces shine in a new splendour More safety for your open fireplace. This is now possible for almost all open fireplaces with the new LINEAR fireplace insert. Available
More informationPRODUCT CATALOGUE. 24-Volt DC valve actuators for spindle valves, pressure reducers, ball valves and butterfly valves
PRODUCT CATALOGUE 24-Volt DC valve actuators for spindle valves, pressure reducers, ball valves and butterfly valves Innovative and user-friendly Simplest form of actuation through integrated motor controls
More informationProduct - Specification
Product - Specification GL Filter Series Element Type A Brief Description Parker Zander, High-performance GLseries filters, containing A grade filter elements are designed for the surfaceactive adsorption
More informationGRANULES AGGLOMERATE PRODUCTION PLANT
MAGMA MACCHINE srl OFFER FOR: MR C02 GRANULES AGGLOMERATE PRODUCTION PLANT INCLUDED OF: Support plant structure Dosing and pouring system for prepolymer Activation system for adhesive with water Mixer
More informationCapanivo Series CN 4000
Capanivo Series CN 4000 Instruction manual 010516 1 UWT GmbH Westendstraße 5 Tel.: +49 (0)831 57123-0 Internet:www.uwt.de D-87488 Betzigau Fax: +49 (0)831 76879 E-Mail: info@uwt.de Scope of this instruction
More informationTOOLS FOR THE SPECIALIST IMPACT WRENCHES
TOOLS FOR THE SPECIALIST ES MACHINE FEATURES Planetary gear Rotation direction reversible Type for underground mining (6 1035 0010) Push button actuation inlet and exhaust Torque adjustment TECHNICAL SPECIFICATION
More informationSIMPLE PRECISE RELIABLE SIMPLE PRECISE RELIABLE. Bredal A/S. Nimvej Vejle. Denmark. Tel.: (+45)
F8 F8 12 meter spreader for spreading powder material. The auger is made of stainless steel to secure the longest possible durability and minimal need for maintenance. The auger can be mounted onto K-models
More informationBelt Press KD 10. Function The sludge dewatering takes place in three phases.
Belt Press KD 10 Belt Press KD 10 The belt press models KD 10-1500 / - 2500 constitute a new generation of high-pressure belt filter presses constructed and produced by Danish Wasterwater Equipment A/S.
More informationShopping trolleys. Shopping trolleys series
Shopping trolleys EL Simply logical: EL series 2 No fuss at the checkout The most obvious feature of this trolley is the elegant base frame without rack, one of the reasons it is popular with sales staff.
More informationGW MK3 DELUGE VALVE HYDRAULIC & PNEUMATIC SPARES 100mm (4 ) 150mm (6 ) 200mm (8 )
25 46 22 29 26 17 27 24 35 23 33 34 2 39 12 13 9 6 36 15 4 37 14 EXTERNAL RESET 32 31 16 8 29 28 30 48 49 22 21 5 18 44 11 10 19 20 47 3 7 38 16 22 7 46 HYDRAULIC VALVE SERVICE PARTS: ITEM DESCRIPTION
More informationOWNER'S MANUAL RED LINE ProCoater PC201IF 100 kv electrostatic powder spray system
OWNER'S MANUAL RED LINE ProCoater PC201IF 100 kv electrostatic powder spray system Tel: (91 22) 242477 / 2424787 Fax: (91 22) 6646696 INTRODUCTION Congratulations on your purchase of the RED LINE ProCoater
More informationLELY Broadcast Spreaders
LELY Broadcast Spreaders Accuracy and Dependability www.lelyturf.com partners in turfcare Unmatched in versatility and dependability Lely broadcast spreaders are the world s most popular machines used
More informationSafety. Operating instructions Solenoid valve VGP DANGER. Contents WARNING CAUTION. Changes to edition Elster GmbH Edition 10.
27 Elster GmbH Edition.7 Translation from the German 344297 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Solenoid valve Contents Solenoid valve... Contents... Safety....
More informationVolumetric Chamber Metering
Volumetric Chamber Metering With the KOCH metering device it is possible to meter material with an accuracy of up to 0.005 %. You can colour shotweights from 1 to 5000 grams and this if required using
More informationData sheet OK Pipe System- OK/OKR/OKD
Data sheet OK Pipe System- OK/OKR/OKD 121025 EXP GB IND PIP BRO 0416 Kongskilde industries A/S Tel. +45 33 68 37 00 mail@kongskilde.com www.kongskilde.com The OK pipe system is ideal for pneumatic and
More informationLighting technology. Sturdy. Pioneering. Extraordinary. Powerful.
Lighting technology. Sturdy. Pioneering. Extraordinary. Powerful. Dear business partner, Tradesmen, industry and service providers need robust and powerful lamps for long-term use even under the harshest
More informationSolidFlow. Monitoring of Solids. Product Information. SWR engineering Messtechnik GmbH
EN SolidFlow Product Information Monitoring of Solids SWR engineering Messtechnik GmbH Using SolidFlow is a sensor especially developed for measuring the flow rate of solids conveyed in metallic ducts.
More informationMESSKO COMPACT SERIES OIL TEMPERATURE ORDERING SPECIFICATIONS.
MESSKO COMPACT SERIES OIL TEMPERATURE ORDERING SPECIFICATIONS. M ES SKO INS TR U ME NTS MESSKO Compact Series - North America Version Type MT-ST160SK(TT) Oil Temperature Project/Reference: US probe 7RM
More informationDRYRAPID. The versatile dry feed conveying system
DRYRAPID The versatile dry feed conveying system Both DR 850 and DR 1500 are flexible, efficient pipe conveying systems for d Wherever dry feed whether meal or pellets has to be conveyed or rationed out
More informationPlastics & Packaging ONE STOP SHOPPING. Canada USA
T H E C O N V E Y I N G P R O D U C T S P E O P L E Plastics & Packaging C O N V E Y I N G P R O D U C T S G U I D E Canada 1-800-263-1942 USA 1-800-263-7782 sales@lorenz.ca www.lorenzproducts.com ISO
More informationDK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
More informationVACUUM CONVEYOR SYSTEM
ISO 9001 CERTIFIED 0575 Ⅱ 1Dc 90 C / Ⅱ 2 GD c 100 C VACUUM CONVEYOR SYSTEM Why!! We are VMECA Vacuum conveyor system? Minimal Maintenance Low Noise Level Automatic Filter Cleaning System Simple to Installation
More informationRenault Clio IV Renault Clio IV Estate Renault Captur
Renault Clio IV Renault Clio IV Estate Renault Captur Partnr.: RN--DU Fitting instructions electric wiring kit tow bar with -P socket up to DIN/ISO Norm 6. We would expressly point out that assembly not
More informationSafety. Operating instructions Solenoid valve for gas VG 6 VG 15/10 DANGER. Contents WARNING CAUTION. Changes to edition 07.15
17 Elster GmbH Edition 1.17 Translation from the German 519 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Solenoid valve for gas VG VG 15/1 Contents Solenoid valve for gas
More informationBS EN Natural. (Orange for Non-sheathed) (Red & Black) or (Brown & Blue) (Red, Yellow, Blue) or (Brown, Black, Grey)
LOW SMOKE HALOGEN FREE (LSHF) FIRE RESISTANT CABLES Voltage Rating (Uo/U) : /0V, /7V or 00/00V Standards Complied Main Specification Fire Tests Flame Retardant Test Test on Acid Gas Evolved Smoke Density
More informationALLWEILER. Pressure-relief valves, indirectly pilot-controlled. Series DVI
Pressure-relief valves, indirectly pilot-controlled Series DVI Range of application The pressure-relief valves of Series DVI can be applied for maximum operating temperatures up to 150 C (higher temperatures
More informationSolids Flowmeters. Continuous In-Line Weighing
Solids Flowmeters Continuous In-Line Weighing Accurate Continuous In-Line Weighing Of Dry Bulk Materials Competitive industries worldwide find they improve the quality of end product, increase operating
More informationOK Pipe System OK/OKR/OKD
OK Pipe System OK/OKR/OKD The OK pipe system is ideal for pneumatic and mechanical conveying and for ventilating applications in both farming and industry. The simple and flexible pipe systems may be adjusted
More informationRSD Series Radial Slot Diffuser
RSD Series Radial Slot Diffuser Typical Applications The RSD is suitable in high turndown applications and is able to maintain occupant comfort over a wide airflow range in cooling. With adjustable pattern
More informationBATHROOM HARDWARE. Bathroom Hardware
Bathroom Hardware s... 10-1 to 10-4 Shower Door Guides... 10-4 Shower Door Brackets... 10-5 Shower Door Sweeps... 10-5 Shower Door Latches... 10-5 Shower Door Handles... 10-5 to 10-6 Miscellaneous Shower
More informationPrimary Shredder. Diesel / Electric Type 450/650/750/850/950
Primary Shredder Diesel / Electric Type 450/650/750/850/950 Technical Specifications The HAMMEL-primary shredder processes extremely difficult materials like waste wood, railway sleepers, root stems, green
More informationEXTRACTAVATOR PRODUCT CATALOG ADAPTIVE MIXING TECHNOLOGY
PRODUCT CATALOG ADAPTIVE MIXING TECHNOLOGY OUR EXPERTISE: BULK HANDLING MIXSYS is the partner of many companies in various fields. We know that each business area requires specific needs and our expertise
More informationCHEZACARB. Conductive Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE
CHEZACARB Carbon Black for Polymer Compounds SIMPLY IMPROVING EVERYDAY LIFE CHEZACARB AC COMPOUNDS CHEZACARB Volume resistivity as a function of CB content (extruded sheets) 1E+09 Carbon Black for Polymer
More informationMSB kw
MSB_BIANCA_ENG 10-03-2004 23:36 Pagina 3 Cod. 2200772235-1M - 03/04 - ALKARIA Rotary Screw Compressor MSB 11-15 - 18-22 - 30 kw GB MSB_VOLTA_ENG 10-03-2004 23:39 Pagina 1 Rotary Screw Compressor MSB DRY
More informationSafety Storage Cabinets
Safety Storage s Safety storage cabinets with folding doors - Overview Ingeniously simple - simply ingenious Convenient and efficient. AGT - Open two doors with one grip of the hand - almost effortless!
More informationV A C U U M F I L L E R & P O R T I O N I N G S Y S T E M S VACUUM FILLER
V A C U U M F I L L E R & P O R T I O N I N G S Y S T E M S VACUUM FILLER PERFECTION AT THE HIGHEST LEVEL REX is setting new standards - Vacuum filling machines of the highest standard The new REX vacuum
More informationCleaning Technology Municipal Technology. Scrubmaster B120 R Compact ride-on scrubber-drier. Comfortable and powerful for efficient cleaning results
Cleaning Technology Municipal Technology Scrubmaster B120 R Compact ride-on scrubber-drier Comfortable and powerful for efficient cleaning results Safe and fatigue-free working: The ergonomic and back-friendly
More informationHints. 1) Han-Modular Inserts. See: HARTING Industrial Connectors Han, chapter 06. 2) Han-HC contacts
Features Split hood for easy assembly Separate assembly panels for Han HC Modular and Han-Modular offer variable mounting options Hood and surface mounted housing with external PE termination Ideal as
More informationPRACTICA MID TO HIGH-SPEED CAPSULE FILLING MACHINE
PRACTICA MID TO HIGH-SPEED CAPSULE FILLING MACHINE PRACTICA The Practica capsule filling machine covers low, medium and highspeed production requirements and performs single product dosing (powder/granulate
More informationSSV SL-022 Safety Shut-off Valve
SSV SL-022 Safety Shut-off Valve These shut-off valves are designed for transmission and distribution networks, as well as commercial and industrial use. KEY BENEFITS High accuracy shut-off Low pressure
More informationPaliotol Yellow K 0961 HD
Technical Information Plastic Additives TI/EVN 1184 e November 21 Page 1 of 6 = registered Trademark of BASF Specialty Chemicals Holding GmbH Paliotol Yellow K 961 HD General properties Chemical character
More informationType VSD35. Nominal length up to 1500 mm: one spigot
Type VSD35 Nominal length up to 1500 mm: one spigot NUMEROUS VARIANTS FOR MANY DIFFERENT INSTALLATION SITUATIONS Slot diffusers with 35 mm diffuser face (nominal width) and adjustable air control elements
More informationOperating instructions Binary level sensor. LI214x /00 04/2016
Operating instructions Binary level sensor LI214x 704776/00 04/2016 Contents 1 Preliminary note................................................. 3 1.1 Symbols used...............................................
More informationSkoda Yeti In the event of functional problems, troubleshooting must be L. limited to about 0.5 hours, contact the installers support:
Skoda Yeti 00- Partnr: SK-0-DU Fitting instructions electric wiring kit tow bar with -P socket u to DIN/ISO Nor 6 We would exressly oint out that assebly not carried out roerly by a coetent installer will
More informationFan Jet Mini 65, 130 & 240
FAN JET MINI Fan Jet Mini 65, 130 & 240 The Mini is designed for restricted spreading of slug pellets from approximately 2 12 metres, typically mounted to the back of a cultivator immediately prior to
More informationZANASI PLUS MEDIUM-HIGH SPEED CAPSULE FILLING MACHINES
ZANASI PLUS MEDIUM-HIGH SPEED CAPSULE FILLING MACHINES ZANASI PLUS WORKING CYCLE ZANASI PLUS CAPSULE FILLING MACHINES OFFER MAXIMUM VERSATILITY IN TERMS OF THE COMBINED DOSING OF VARIOUS PRODUCTS WITHIN
More informationPaint feed made to measure!
Extremely reliable Long service life Highly economical Pneumatic feed pumps Paint feed made to measure! Innovative and only from WAGNER: Pneumatic feed pumps Powerful performance! Constant power thanks
More informationPRODUCTS.
PRODUCTS ABFALLBEHÄLTER & CONTAINER WEBER GmbH & Co. KG quality made in germany Weber is one of the leading manufacturers of waste management products and offers a high-quality range of waste containers
More informationIntake Air Shut-off Valve
Intake Air Shut-off Valve Model 4261M Overview Diesel run-away is a potential problem that can cause damage to equipment. A diesel engine can run away and self destruct on hydrocarbon vapors, even if the
More informationFinish & SuperFinish. Airless diaphragm pumps. Finish & SuperFinish. Wide range of applications Various performance classes Innovative QLS technology
Finish & SuperFinish Finish & SuperFinish Airless diaphragm pumps Wide range of applications Various performance classes Innovative QLS technology wagner-group.com Powerful and robust diaphragm pumps Fully
More informationBuchholz Relay MBP Gas and Oil Actuated Relay
Buchholz Relay MBP Gas and Oil Actuated Relay Reed switches for detection of gas formation and dropping oil level Flap valve to protect in case of excessive high oil flow rate Separated oil and switching
More informationair-cooled 18,000 rpm 25,356 xg 24,000 rpm 45,078 xg refrigerated Table-Top High-Speed Centrifuges High performance instrument for the daily routine
air-cooled 18,000 rpm 25,356 xg 24,000 rpm 45,078 xg refrigerated Table-Top High-Speed Centrifuges High performance instrument for the daily routine Universal Centrifuges High-Speed Centrifuges with Flexible
More informationRacks, baskets and storage for tubes pipettes and flasks
Racks, baskets and storage for tubes pipettes and flasks TUBE RACKS Schematic diagram indicating external measurements A-B-C-D A D C B A: Total length. B: Total width. C: Total height including feet. D:
More informationLighting series JLZ Lighting series JELZ
C A B I N L I G H T S Lighting series JFZ Lighting series JFZS Lighting series JLZ Lighting series JELZ 2011/09 CABIN LIGHTS Description of lighting: The JUNG lighting series JFZS, JFZ, JLZ and JELZ are
More informationExtremely quiet due to unique flexible drive system. Super High-Speed Centrifuge. Refrigerated - 30,000 rpm / 70,434 xg
Extremely quiet due to unique flexible drive system Super High-Speed Centrifuge Refrigerated - 30,000 rpm / 70,434 xg Super High-Speed High-Speed Centrifuge with Flexible Axis! This provides the best smooth
More informationGARBAGE CANS 120L / 240L
1 2 GARBAGE CANS 120L / 240L GARBAGE CAN 120L CHARACTERISTICS Garbage can volume: 120l Garbage can dimensions: (LxWxH) 560x480x940 Maximum load capacity of the garbage can: 100 ± 5 kg Garbage can weight:
More informationConsumer confidence indicator
February 2016 BUSINESS AND CONSUMER SURVEY RESULTS 120 Graph 1: Economic sentiment indicator (s.a.) 110 100 90 80 70 long-term average (1990-2015) = 100 Euro Area (EA) European Union (EU) 60 1990 1992
More informationPOWDER TRANSFER CONTAINMENT VALVES
1 POWDER TRANSFER CONTAINMENT VALVES PharmaSafe Features & Benefits Ensure industry regulatory compliance. Process toxic powders, ensuring the safety of your personnel and a dust free environment. Reduce
More information