22956 Hwy 61 PO Box 295 Morley, MO Phone: Fax: MODOT 04/17/17

Transcription

1 -GENERAL SERVICES FLEET SECTION TP Viking TP 26, 26' Tow Plow with swivel tongue, (1) 12' moldboard and (1) 14', base angles drilled for carbide edges (no cutting edges included), 10 gauge steel with 1/4" poly overlay moldboards. Dual Arvin Meritor 18,000 LB steer axles with connecting linkage. ABS brakes and fenders. Federal safety lights and reflectors, rear perpendicular to the travel lane and two pedestals for customer supplied warning lights. ICC bumper, tow loop to match Premier 100NS hook. Trailer painted School bus yellow (4421). Parts and instruction manuals included EA 73, , TP Viking TP26 LH, 26' left hand discharge Tow Plow with swivel tongue, (1) 12' moldboard and (1) 14', base angles drilled for carbide edges, 10 gauge steel with 1/4" poly overlay moldboards. Dual Arvin Meritor 18,000 LB steer axles with connecting linkage. ABS brakes, and fenders. Federal safety lights and reflectors, rear perpendicular to the travel lane and two pedestal mounted amber rotating beacons. ICC bumper, tow loop to match Premier 100A hook. Trailer painted Omaha orange. Parts and instruction manuals inluded EA 73, , TP Viking TP26, Bi-Directional Tow Plow with the ability to plow right or left, with extended drop tongue, (2) 12' moldboards (right hand and left hand) and (2) 14' moldboards (right hand and left hand), base angles drilled for carbide edges (no cutting edges included), 10 gauge steel with 1/4" poly overlay moldboards. Dual Arvin Meritor 18,000 LB steer axles with connecting linkage. In cab control for deployment shift. ABS brakes and fenders. Federal safety lights and reflectors, rear perpendicular to the travel lane and high visibility lighting package. ICC bumper, tow loop to match 1.00 EA 114, ,500.00

2 -GENERAL SERVICES FLEET SECTION Premier 100NS hook. Trailer painted School Bus Yellow. Parts and instruction manuals included. TP Carbide cutting edges - 3/4" x 6" with 1/2" cover 1.00 EA 2, , blade - 26' with hardware installed TP Kueper GK5 Rubber/Ceramic Blades & Hardware 1.00 EA 4, , for Tow Plow Moldboards - 26' installed TP Kueper Tuca Carbide for a Tow Plow - 26' with 1.00 EA 6, , hardware installed TP Joma blades installed on 26' Tow Plow 1.00 EA 12, , TP gallon poly tank mounted to TP26 Tow Plow 1.00 EA 2, , for direct liquid or ballast. No plumbing or delivery equipment included TP gallon poly tank mounted to TP26 Tow Plow 1.00 EA 2, , for direct liquid or ballast. No plumbing or delivery equipment included (FOR BI-DI TOW PLOW) TP Baffle Balls for 1025 gallon tank 1.00 EA 1, , TP gallon poly tank mounted to TP26 Tow Plow EA For spreader pre-wet. No plumbing or delivery equipment included TP gallon poly tank mounted to TP26 Tow Plow EA 1, , For pre-wet and/or direct liquid. No plumbing or delivery equipment included. TP gallon poly tank with bands 1.00 EA 2, , TP Corten steel spreader - Tow Plow mounted with 7.8 cubic yard capacity, 24"wide conveyor with 50:1 gearbox, front discharge spinner, poly spinner disc and front discharge 1.00 EA 18, , TP Stainless steel spreader - Tow Plow mounted with 7.8 cubic yard capacity, 24"wide conveyor with 50:1 gearbox, front discharge spinner, poly spinner disc and front discharge 1.00 EA 20, ,900.00

3 -GENERAL SERVICES FLEET SECTION TP Tow plow spreader hose kit plumbed trailer tongue 1.00 EA bulkhead TP Shurco side roll manual load cover for Tow Plow 1.00 EA 2, , spreader TP Conveyor motor sensor 1.00 EA TP Connection Bulkhead plate for wire harness, 1.00 EA hydraulic lines and air lines - mounted to Tow Plow tongue (Standard) TP Whelen 360 degree LED warning lights 1.00 EA TP Whelen high visibility light package with MoDOT 1.00 EA 2, , specific Whelen 400 Lights TP TP Moldboard light (Single direction) 1.00 EA TP TP Moldboard light (FOR BI-DI TOW PLOW) 1.00 EA TP Whelen upgrade light pkg for RH or LH Tow Plow 1.00 EA 4, , TP Whelen upgrade light pkg for Bi-directional Tow 1.00 EA 4, , Plow TP Discharge chute for truck mounted spreader to 1.00 EA drop over Tow Plow tongue. 12 gauge Corten steel TP Tow plow spinner assembly for dump truck use EA 1, , not installed TP Discharge chute for truck mounted spreader includes: "Y" chute and diverter plate to direct material to either side of the TowPlow tongue (2) 8" flexible tubes to discharge salt at road level 1.00 EA 1, , TP Viking Cives hydraulic prewet package for Tow 1.00 EA 2, , Plow Spreader - Open loop (Tank purchased separately) TP Viking Cives hydraulic prewet package for Tow 1.00 EA 3, ,150.00

4 -GENERAL SERVICES FLEET SECTION Plow Spreader - Closed loop (Tank purchased separately) TP Remote mounting bracket for customer supplied valve to operate spreader and prewet. Includes valve mounting bracket, hydraulic lines plumbed to a bulkhead at the trailer tongue, and installation of customer supplied valve bank EA TP Certified Power hydraulic powered Pre wet system for Tow Plow Spreader includes pre wet pump enclosure, wire harness and plumbing kit with nozzles - tank to be purchased seperately EA 3, , TP Mounting equipment for direct liquid application equipment. includes mounting brackets for liquid pump, valve enclosure, plumbing and spray nozzles. MOUNTING parts only installed and painted at time of trailer frame manufacture EA 3, , TP Viking Cives 3-lane direct liquid application equipment package for unspecified controller. Includes: enclosure with liquid pump and motor, stainless steel spray bar with nozzles, and required plumbing 1.00 EA 9, , TP lane direct liquid application equipment package for Tow Plow. Includes: pump with valves, wire harness, plumbing and nozzles, harness for Certified Power ACS Controller 1.00 EA 9, , TP Gravity feed SS spray bar, no nozzels 1.00 EA 1, , TP LaserLine GL3000PMC Laser System 1.00 EA 2, , TP Single color camera and (2) nozzle wash kit. Single 7" LCD flat panel display with (3) camera inputs and double knuckle monitor mount. Not installed 1.00 EA 1, , TP Hubometer installed on rear wheel of Tow Plow 1.00 EA TP Certified power spreader manifold for Tow Plow 1.00 EA 3, ,600.00

5 -GENERAL SERVICES FLEET SECTION spreader conveyor, spinner and prewet in an enclosure mounted on Tow Plow. Manifold in an enclosure mounted to the Tow Plow frame with hydraulics hoses for pressure, return and load sense line. Electric harness from manifold to the cab mounted controller (three piece) TP Freight to all locations for 26' Tow Plow 1.00 EA Prepared By: Lauren Sub-Total 401, Memo: TOW PLOW RENEWAL (NO CHANGE FROM 2016) Shipping Discount 0.00 must fill out the information below before the order can be processed. Taxes 0.00 Total 401, Accepted by: : P.O.#: *d price does not include any applicable taxes. * are Due Upon Receipt unless prior credit * for established accounts, NET 30 days *Please note if chassis is furnished, it is as a convenience and terms are Net Due on Receipt of Chassis