BAIRD Wall Mounting System WL-2(23")
|
|
- Agnes Clarke
- 6 years ago
- Views:
Transcription
1 BAIRD Wall Mounting System WL-2(23") The WL-2(23") Wall Mounting System is engineered to handle up to and including a 10' (3.0M) antenna. The WL-2(23") has a 23" offset from the wall to the mast. The customer must determine if the 23" offset provides the clearances necessary for proper alignment and/or operation of their antenna. Baird Satellite offers other wall mounting systems with larger offsets (36" - 48" - 60" - 60" HD). PAGE 32
2 BAIRD Wall Mounting System WL-2(36") The WL-2(36") Wall Mounting System is engineered to handle up to and including a 10' (3.0M) antenna. The WL-2(36") has a 36" offset from the wall to the mast. The customer must determine if the 36" offset provides the clearances necessary for proper alignment and/or operation of their antenna. Baird Satellite offers other wall mounting systems with different offsets (23" - 48" - 60" - 60" HD). PAGE 33
3 PRODUCT SPECIFICATIONS MODEL: WL-2(36") Wall Mounting System TYPICAL USAGE Wall mount system (Note: A structural engineer should review the application and determine if the wall is capable of supporting the additional loads imposed by the mounting system and antenna. Handles up to and including a 3.0M antenna for Ku & C band - transmit and receive. The customer must determine if the 36" offset provides the clearances necessary for proper alignment and/or operation of their antenna. SPECIFICATIONS The mount is made of structural steel: Flats/Angles/Channels: A36 Tubing: A500 GR.B All parts are hot dip galvanized after fabrication. Hardware is zinc plated. TOP VIEW Masts available up to 6.62" O.D. Typical mast length is 2' or 3'. Mount comes with a through wall mounting kit consisting of an upper & lower back plate and 16" long threaded rod bolts. FRONT VIEW SIDE VIEW
4 PRODUCT SPECIFICATIONS MODEL: WL-2(23") Wall Mounting System TYPICAL USAGE Wall mount system (Note: A structural engineer should review the application and determine if the wall is capable of supporting the additional loads imposed by the mounting system and antenna. Handles up to and including a 3.0M antenna for Ku & C band - transmit and receive. The customer must determine if the 23" offset provides the clearances necessary for proper alignment and/or operation of their antenna. SPECIFICATIONS The mount is made of structural steel: Flats/Angles/Channels: A36 Tubing: A500 GR.B All parts are hot dip galvanized after fabrication. Hardware is zinc plated. Masts available up to 6.62" O.D. Typical mast length is 2' or 3'. TOP VIEW Mount comes with a through wall mounting kit consisting of an upper & lower back plate and 16" long threaded rod bolts. FRONT VIEW SIDE VIEW
5 BAIRD Wall Mounting System WL-2(48") The WL-2(48") Wall Mounting System is engineered to handle up to and including a 10' (3.0M) antenna. The WL-2(48") has a 48" offset from the wall to the mast. The customer must determine if the 48" offset provides the clearances necessary for proper alignment and/or operation of their antenna. Baird Satellite offers other wall mounting systems with different offsets (23" - 36" - 60" - 60" HD). PAGE 34
6 PRODUCT SPECIFICATIONS MODEL: WL-2(48") Wall Mounting System TYPICAL USAGE Wall mount system (Note: A structural engineer should review the application and determine if the wall is capable of supporting the additional loads imposed by the mounting system and antenna. Handles up to and including a 3.0M antenna for Ku & C band - transmit and receive. The customer must determine if the 48" offset provides the clearances necessary for proper alignment and/or operation of their antenna. SPECIFICATIONS The mount is made of structural steel: Flats/Angles/Channels: A36 Tubing: A500 GR.B All parts are hot dip galvanized after fabrication. Hardware is zinc plated. TOP VIEW Masts available up to 6.62" O.D. Typical mast length is 2' or 3'. Mount comes with a through wall mounting kit consisting of an upper & lower back plate and 16" long threaded rod bolts. FRONT VIEW SIDE VIEW
7 BAIRD Wall Mounting System WL-2(60") The WL-2(60") Wall Mounting System is engineered to handle up to and including a 10' (3.0M) antenna. Note, the WL-2(60") is suitable for 10 (3.0M) antennas with AZ/EL mounts, but is not recommended for 10' (3.0M) steerable antennas. The WL-2(60") has a 60" offset from the wall to the mast. The customer must determine if the 60" offset provides the clearances necessary for proper alignment and/or operation of their antenna. Baird Satellite offers other wall mounting systems with different offsets (23" - 36" - 48" - 60" HD). PAGE 35
8 PRODUCT SPECIFICATIONS MODEL: WL-2(60") Wall Mounting System TYPICAL USAGE Wall mount system (Note: A structural engineer should review the application and determine if the wall is capable of supporting the additional loads imposed by the mounting system and antenna. Handles up to and including a 3.0M antenna for Ku & C band - transmit and receive. The customer must determine if the 60" offset provides the clearances necessary for proper alignment and/or operation of their antenna. SPECIFICATIONS The mount is made of structural steel: Flats/Angles/Channels: A36 Tubing: A500 GR.B All parts are hot dip galvanized after fabrication. Hardware is zinc plated. Masts available up to 6.62" O.D. Typical mast length is 2' or 3'. TOP VIEW Mount comes with a through wall mounting kit consisting of an upper & lower back plate and 16" long threaded rod bolts. FRONT VIEW SIDE VIEW
9 BAIRD Wall Mounting System WL-2HD(60") The WL-2HD(60") is a heavy duty wall mount designed to handle up to and including a 10' (3.0M) antenna. The heavy duty version was engineered to be a more rigid mount, for better performance when used in conjunction with steerable and/or Ku band applications. The WL-2HD(60") has a 60" offset from the wall to the mast. The customer must determine if the 60" offset provides the clearances necessary for proper alignment and/or operation of their antenna. Baird Satellite offers other wall mounting systems with different offsets (23" - 36" - 48" - 60"). PAGE 36
10 PRODUCT SPECIFICATIONS MODEL: WL-2HD(60") Wall Mounting System TOP VIEW MAST TYPICAL USAGE Wall mount system (Note: A structural engineer should review the application and determine if the wall is capable of supporting the additional loads imposed by the mounting system and antenna. Handles up to and including a 3.0M antenna for Ku & C band - transmit and receive. The customer must determine if the 60" offset provides the clearances necessary for proper alignment and/or operation of their antenna. SPECIFICATIONS The mount is made of structural steel: Flats/Angles/Channels: A36 Tubing: A500 GR.B All parts are hot dip galvanized after fabrication. Hardware is zinc plated. Masts available up to 6.62" O.D. Typical mast length is 2' or 3'. Mount comes with a through wall mounting kit consisting of an upper & lower back plate and 16" long threaded rod bolts. FRONT VIEW SIDE VIEW
Non Penetrating Mast Mount for 2.4M Antennas
April 27, 2007 INSTALLATION MANUAL Non Penetrating Mast Mount for 2.4M Antennas GENERAL DYNAMICS PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658USA Phone 828-464-4141 www.gdsatcom.com Non-Penetrating
More informationTable of Contents. Kit Maximum Examples Index by Kit Number Terms and Conditions...Inside Back Cover
Table of Contents Antenna Mounts Light Standoff Mounts...2 Medium Standoff Mounts...4 Heavy Standoff Mounts...6 Fixed Crossover Assemblies...8 Universal Crossover Assemblies...8 Hybrid Crossover Assemblies...9
More informationPower Heads. Standard Unload. Power Sweep. Commercial Unload. Bin Systems. Unloading
Standard Unload Power Sweep Commercial Unload Power Heads Unloading Bin Systems Klean Sweep the finishing touch. The unique back-up shield and torque tube combination adjusts for close floor clearance
More informationAlbuquerque Public Schools Industrial Fencing Material and Installation on Demand BID #18-059KN. Bid Tabulation Abstract
Albuquerque Public Schools Industrial Fencing Material and Installation on Demand BID #18-059KN Bid Tabulation Abstract ITEM # DESCRIPTION BRAND NAME Fabric - Smooth galvanized, 2 in. mesh, open hearth
More informationSITE ACCESSORIES CATALOG USA.
SITE ACCESSORIES CATALOG USA 2019 www.trylon.com Pictorial Table of Contents Page 2 Sector V-Frames Page 4 RRU Mounts Page 5 Rotatable Standoff Mounts Page 6 Light Standoff Mounts Page 8 Medium Standoff
More informationEFFECTIVE WIND VELOCITY FORMULA SHEET
ROOF MOUNTS EFFECTIVE WIND VELOCITY FOULA SHEET ROHN recommends a minimum mph Effective Wind be used for determining ballast requirements. V = C1 C2 V e V e = Effective Wind at centerline of antenna for
More informationEFFECTIVE WIND VELOCITY FORMULA SHEET
RM ROOF MOUNTS EFFECTIVE WIND VELOCITY FORMULA SHEET ROHN recommends a minimum mph Effective Wind be used for determining ballast requirements. Refer to page 2 for ballast requirements and general notes.
More information2.88 OD Universal Mast Mount
Revision A January 19, 2006 ASSEMBLY MANUAL 2.88 OD Universal Mast Mount GENERAL DYNAMICS PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658USA Phone 828-464-4141 www.gdsatcom.com 2.88 O.D. Universal
More informationInstruction Manual For The WildBlue 65cm x 75cm Elliptical Ka Antenna
Raven 2009ODU Manual Instruction Manual For The WildBlue 65cm x 75cm Elliptical Ka Antenna 1035-09-004-A Caution This instruction leaflet will assist you in the correct installation of the product. Read
More informationDirectional Antenna MHz K SITEL Caponago Tel.02 /
47 86 MHz K 72 6 4. SITEL Caponago Tel.2 / 95.74.6.9 ly polarized broadband directional antenna made of aluminum and protected by a fiberglass cover. Type No. K 72 6 47 K 72 6 41 A Input 7-16 female N
More information2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
Frequency Range Dual Polarization HPBW Adjust. Electr. DT 1695 2690 2 10 set by hand or by optional RCU (Remote Control Unit) Y1 X 35 2-Port Antenna 1695 2690 35 19.5dBi 2 10 T Type No. 80010678 Highband
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationvex TITANIUM WITH MATTE BLACK LIP // matte black STREET SERIES SIZE OFFSET BACKSPACE LUGS LOAD RATING TITANIUM BLACK
20 17 STREET SERIES SS vex SIZE OFFSET BACKSPACE LUGS LOAD RATING TITANIUM BLACK 16x8 0mm 4.50 5 and 6 Lug/ 8 Lug 2650 lbs./ 3640 lbs. $215.50 $205.50 311 17x8.5 0mm 4.75 5 and 6 Lug/ 8 Lug 2650 lbs./
More informationProduct Submittals for Project
Product Submittals for Project May 011-1 Couplings Figure 577 Light Weight Rigid Coupling For Fire Protection Pressure Rating and Listing / Approval information contact Tyco Fire Suppression & Building
More informationContinue to use current part numbers, we will help you translate these to new part numbers.
Valued Customer Pelco Products Inc. is continuously searching for ways to improve our products or services. Many customers have requested that our part numbering system offer unique part numbers. You asked
More informationCLAMPED PIPE SHOE EME-CS1 (1/2 8 )
CLAMPED PIPE SHOE EME-CS1 (1/2 8 ) Designed to eliminate field welding requirements for pipe supports. Ease of installation. Easy to install due to bolt system. Fields of application: Offshore and onshore
More informationType 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
More informationInstallation Guide for HP3 & HP4 ANTENNAS
Installation Guide for HP3 & HP4 ANTENNAS with Cast Mount 495R Billerica Ave. North Billerica, MA 01862 USA Tel (978)459-8800 fax (978)459-3310 / 8814 email; sales@radiowaves.com www.radiowaves.com IMPORTANT!
More informationLIMITED SECURITY RACK (LSR)
Builder of High Performance, High Quality Truck Products Dyna-Tube Extrusion, aerodynamic radius corner shape, high strength low weight. Offset design to accomadate the new style exhaust systems. 4 Foot
More informationRevision C, June 2016 Pipe Kit for Mounting 1 to 3 Antennas 800PIPEKIT-X GENERAL INFORMATION
Revision C, June 2016 Pipe Kit for Mounting 1 to 3 Antennas 800PIPEKIT-X GENERAL INFORMATION The 800PIPEKIT-X is used for mounting one to three Commscope base station antennas to an existing pole measuring
More informationGrade Crossing Signaling Systems Products
Grade Crossing Signaling Systems Products Wayguard S60 Series Grade Crossing Gate Mechanisms Pinnacles Cross Arms and Junction Boxes A71 A78 A83 A86 A95 A100 Wayguard EBell Series Electronic Bells Sidelight
More informationSTANDARD 80 SERIES GUYED TOWER GENERAL USE FEATURES. Phone (309) Fax (309) The Industry Standard
G GUYED TOWERS - 80 STANDARD 80 SERIES GUYED TOWER 80 SERIES GENERAL USE The ROHN Model 80 Guyed Tower is designed with variable sized legs and braces to allow construction to heights of 1000. This tower
More informationSteel Fabrications Equipment Brackets
April 2004 Page 25 of 43 H. R. Steel; Each bracket includes (2) 1/2 x 1 hex bolts, flat washers, and special retaining clips as well as (1) 1/2 x 2 captive carriage bolt, shake proof washer, lockwasher,
More informationPipe Hangers, Strut & Accessories
I N D U S T R I E S I N C. Base Price List September 22, 2008 Pipe Hangers, Strut & Accessories Phone 800.243.4844 860.647.1431 Fax 860.647.1160 180 Olcott Street Manchester, CT 06040 w w w. e m p i r
More informationBRACKETS, MOUNTS & HARDWARE
HIGH VOLTAGE SWITCHGEAR & AUTOMATION EQUIPMENT SECTION 6 Brackets, Mounts & Misc. Hardware CAT. NO: 040930G May, 2008 INERTIA Engineering & Machine Works, INC. Fax: (209) 931-8186 6665 Hardaway Road, Stockton,
More informationCouplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications
Figure 71 Flange Adapters (ANSI Class 5/150) The Figure 71 Flange Adapter is capable of pressures up to 300 psi (20,7 bar) depending on pipe size and wall thickness. It provides a direct transition from
More informationAFC Catalogue Section 4 Antennas and Reflectors. 1. Large antenna specifications (3.7m, 4.3m & 5.0m diameter)
FC Catalogue Section 4 ntennas and Reflectors. Large antenna specifications (.7m, 4.m & 5.0m diameter). -ft/.7m diameter motorized antenna system. 4-ft/4.m diameter motorized antenna system 4. 6-ft/5.0m
More information10 X 10 NPMM Installation
May 20, 2016 Revision E ASSEMBLY MANUAL Installation General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com 10' x 10' NPMM INSTALLATION INSTRUCTIONS
More informationEquipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER DS (GUN METAL GRAY FINISH)
Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER 21-823DS (GUN METAL GRAY FINISH) 1 ITEM NO. PART NUMBER DESCRIPTION QTY. 1 21-202DOSK AIR FILTER; OFFSET 2.75" X
More informationDIAL DAMPER REGULATOR SET (1/4 ) Product Data Sheet
DIAL DAMPER REGULATOR SET (/4 ) Elgen s Dial Damper Regulator Set is used for controlling the damper inside the ductwork. /4 regulator sets for dampers up to 0. Quick and easy installation Kit Components
More information91 (2311 mm) (1581mm) (1375 mm)
ALVARADO MSTX Maximum Security Turnstile Technical Specifications Dimensions Unit Height: Unit Width: Unit Depth: 91 (2311 mm) 62.25 (1581mm) 54.125 (1375 mm) Materials Yoke: (Curved Section) Yoke Guard
More informationP R O D U C T C A T A L O G
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. P R O D U C T C A T A L O G 2017 Feb. 2 www.aaatech.com P R O U D L Y S E R V I N G I N D U S T R Y S I N C E 1 9 7 1 AAA Technology & Specialties Co.,
More informationGrade Crossing Signaling Systems Products
Grade Crossing Signaling Systems Products Wayguard S60 Series Grade Crossing Gate Mechanisms A77 A84 Pinnacles Wayguard EBell Series Electronic Bells Mast Adapter Mounts A85 A86 Sidelight Cantilevered
More informationMerlin/3 Way Separation Gate Installation Manual. Technical Manual Revision 01
Merlin/3 Way Separation Gate Installation Technical 006798 Revision 01 Contents Contents... 2 Important information - read this first... 4 Icons... 4 1. Introduction... 5 2. Services... 5 3. BOM... 6 3.1
More informationFIBERGLASS DEAD-ENDS & TANGENT ARMS
FIBERGLASS DEAD-ENDS & Index FIBERGLASS DEAD-ENDS & Introduction.... 1 Dead-End Arm s.... 2 Dead-End Arms Code.... 3 FDA20 Series.... 4 FDA25 Series.... 5 FDA30 Series.... 6 Tangent Arms Series.... 7 Tangent
More informationTruck Chassis Weights & Dimensions :
Truck Chassis Weights & Dimensions : KERAX 350.34 6X4 HD-WKP GVW Max. Body Length (W) Min. Body Length (W) Total Payload Chassis Cab Weight Front Load Distribution Rear Load Distribution Front Axle Max.
More information2005 ODU Assembly Job Aid
Summary This Job Aid covers: Verify AZ/EL Assembly Alignment Antenna Back Bracket Assembly Antenna Boom Arm Assembly Antenna TRIA Attachment Mounting the Antenna Base-Assembly Installing the Antenna Elliptical
More informationModel m x 1.6 m NPRM with Roof Pads For 96 cm, 1.0 m and 1.2 m Antenna Systems
Installation Instructions 8000839-02 Model 60063-04.6 m x.6 m NPRM with Roof Pads For 96 cm,.0 m and.2 m Antenna Systems Skyware Global 35 Industrial Park Drive Smithfield, NC 27577 USA Telephone: +-99-934-97
More information4" and 6" Rigid Unloader Instructions
1004 East Illinois Street Assumption, IL 62510 217-226-4421 4" and 6" Rigid Unloader Instructions Instructions Date: 01-22-09 Printed in the U.S.A. Page 1 of 6 Copyright 2009 by www.gsiag.com Group RA-3036
More informationTO BE USED FOR MAINTENANCE MICHIGAN DEPARTMENT OF TRANSPORTATION. 2 3/16" x 2 3/16" x 10 Ga. 12" 15.5" 1 1/2" x 1 1/2" x 12 Ga.
2 3/16" x 2 3/16" x 10 Ga. TOP VIEW 18" 1" 7/16" Hole 1 1/2" x 1 1/2" x 12 Ga. two sides only steel tubing 1 1/2" x 1 1/2" x 12 Ga. @ 18" long steel angle 15.5" 12" TRAFFIC 3/8" Hex head grade 5 steel
More informationSlim profile steel system for doors and windows
Slim profile steel system for doors and windows 2 TABS thermal insulation system 3 Window and door variants 5 References 15 Overview of products and items 39 The latest information and technical descriptions
More informationTERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG
TERRATORQUE HELICAL ANCHORS AND HELICAL PILING PRODUCT CATALOG INTRODUCTION TerraTorque offers quality helical anchors and helical piling to industry. Our products are available in square shaft (type TS)
More information2018 CATALOGUE Industrial Products and Price List
McGowan Fence & Supply Limited 811 Progress Avenue Scarborough, Ontario M1H 2X4 Tel (416)431-5556 Fax (416)431-2595 2018 CATALOGUE Industrial Products and Price List QUALITY and Service Since 1948 TERMS
More information74CM KU-BAND TYPE 743 ANTENNA SYSTEM with Factory Assembled Az/El Mount
January 2016 Revision A ASSEMBLY MANUAL 8001107-01 74CM KU-BAND TYPE 743 ANTENNA SYSTEM with Factory Assembled Az/El Mount A ORIGINAL RELEASE EC-02390 JAN 2016 R. Thompson REV. DESCRIPTION DATE APPROVED
More informationSaf-T Vent EZ Seal. Technical and Dimensional Data. Single Wall AL 29-4C Stainless Steel Special Gas Vent
Technical and Dimensional Data Saf-T Vent EZ Seal Single Wall AL 29-4C Stainless Steel Special Gas Vent 130 Industrial Boulevard Turners Falls, MA 01376 Copyright 2001 Heat-fab, Incorporated Saf-T Vent
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net Call to order: (815) 244-3500 SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine Screw
More informationSize Box Qty. Item# Less Box Box
Post Caps External Post Caps White Tan Stone 4 x 4 125 IVC0100 0.95 0.86 5 x 5 160 IVC0110 1.38 1.24 4 x 4 125 IVC0101 1.09 0.98 5 x 5 160 IVC0111 1.48 1.33 4 x 4 125 IVC0102 1.09 0.98 5 x 5 160 IVC0112
More informationNew. Axle Spindles. Universal Tie Plates. Tie Plates. Axle Tie Plate Kits. Includes: nut, washer and cotter pin.
Axle Spindles Spindle Bearing Description Surface Part # 1-1/4 x 7 1 80055 1-1/4 x 7 (a) 1-1/16 80060 1-3/4 x 8-1/4 1-1/16 x 1-3/8 80235 2 x 8-1/4 1-1/16 x 1-3/8 80325 Eliminator, 1,750# (b) 80324 Nut/Washer/Cotter
More informationSingle Profiles. Standard NbV U Series
Standard NbV U Series Single Profiles All profiles from 0 NbV thru 8 NbV are from S450 J2 Modified in lengths to 12 meters. Longer lengths are available on request. PTI typically stocks 6 meter lengths
More informationAero Materiel. Locks and latches
Aero Materiel Locks and latches E3 Material and finish Zinc alloy, powder coated or chrome plated and steel plated Max static load 300N NEMA4/IP65 sealing is achieved by using optional flange gasket Recommended
More informationINSTALLATION GUIDE Canted Billet 4-Bar, 4x2 Rear Frame
INSTALLATION GUIDE 7154 Canted Billet 4-Bar, 4x2 Rear Frame Description: Non-application specific, weld-in, 4 x 2 rear frame for use with Chassisworks 6241 billet aluminum suspension links. IMPORTANT:
More informationSTANDARD PIPE CLAMP FIG. 520 & 521
Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod
More informationF3 Dual Tower Trainer F3DTT
F3AT TOWER BOM (Quantities shown in table on the left are for (1) Tower. Actual quantity per machine is double.) PART NO. QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-0020 1 7/16-14 UNC x 5 Bolt 01-1331
More informationConfigurations & Parts Identification
900 TWS Trailer Suspension Series Configurations & Parts Identification Hutchens Industries Advancing the Practical Application of Suspension Technology Springfield, MO n (00) 654-24 n (41) 62-5012 Fax
More informationModel Mast Adapter with 4-Foot Boom. User s Manual 1165 NATIONAL DRIVE SACRAMENTO, CALIFORNIA WWW. ALLWEATHERINC. COM
Model 30319 Mast Adapter with 4-Foot Boom User s Manual 1165 NATIONAL DRIVE SACRAMENTO, CALIFORNIA 95834 WWW. ALLWEATHERINC. COM TABLE OF CONTENTS INTRODUCTION... 1 INSTALLATION... 2 CALIBRATION... 5 MAINTENANCE...
More informationWIRE BASKET TRAY CANADIAN ELECTRICAL RACEWAYS INC.
CANADIAN ELECTRICAL RACEWAYS INC. WIRE BASKET TRAY Made of heavy-gauge zinc plated wire mesh, CER basket tray is ideal for your commercial or industrial cable management project. A full range of cable
More informationRADIOFLECT. passive repeaters page 46
RDIOFLET passive repeaters page 46 RDIOFLET passive repeaters This range of calzavara products forms part of an interesting technical solution to supply and install microwave radio links, in areas where
More informationI N D U S T R I E S, I N C. MARINE I-BEAMS LADDER SYSTEMS
CHANNEL-TRACK & TUBE-WAY MARINE I-BEAMS LADDER SYSTEMS I-Beam Siderail Ladder Cable Tray End View 1.5".595" 4.188".344" 1.039" 1.5" 4 Siderail Example Rung Detail.85" Features: 1. Siderail is roll formed
More informationINSTALLATION INSTRUCTIONS ELEVATION REAR BUMPER FORD F150
INSTALLATION INSTRUCTIONS PARTS LIST: 1 Elevation Bumper Assembly 2 Plastic Plugs (license plate mount) 6 12-1.75mm x 50mm Hex Bolts 8 4mm x 10mm Socket Head Screws 12 12mm x 37mm OD x 3mm Flat Washers
More informationGS-FLANGE SYSTEM. SAE psi
SAE 10000 psi Flange dimensions...160 Retain ring flanges...161 Grooving direct on to pipe...162 Flange for welding...163 Tee block, Elbow block...164 Blind flange...165 Seal carriers...166 Retain ring...167
More informationI N G F E AT U R. Torca Products, Inc. PRODUCTS
F E AT U R I N G Torca Products, Inc. PREMIUM EXHAUST CLAMPING PRODUCTS EXHAUST CLAMPING PRODUCTS BEST TorcTite PRE-FORMED EXHAUST CLAMPS W/ GASKET ATTACHED TO REACTION BLOCK Superior performance Best
More information(4) 10mm x 35mm Bolt/8mm Nut Plates. (2) 12mm Double Nut Plates. (2) Center Mounting Brackets (use for driver or passenger side)
PARTS LIST: PREMIUM RUNNING BOARD Qty Description Qty Description 1 Driver/Left Running Board 8 10mm Lock Washers 1 Passenger/Right Running Board 4 10-1.5mm Hex Nuts 2 Driver/Left Mounting Brackets (front
More informationFull Line EC&N Catalog: Elbows, Couplings & Nipples NORTH AMERICA S BEST-IN-CLASS ELBOWS, COUPLINGS & NIPPLES. years
Full Line EC&N Catalog: Elbows, Couplings & Nipples NORTH AMERICA S BEST-IN-CLASS ELBOWS, COUPLINGS & NIPPLES years We ve been connecting America Picoma is America s leading brand of steel elbows, couplings
More informationPulltarps Tower with Electric Drive
Pulltarps Tower with Electric Drive 513-0011 / 513-0012 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 www.pulltarps.com 607-0116 RH 08/26/13 Pulltarps Tower Installation
More informationSection K. Cabtray - Cable Management System
Section K Cabtray - Cable Management System Introducing Cabtray Cabtray Standard Range Cabtray Load Carrying Capacity mm High Tray Joiner Kit K5 50 mm High Tray Joiner Kit K6 Tray Joiner Kit Trapeze Support
More informationAll fitting are offered at 300mm Radius as standard and others Radius available on request.
Heavy Duty Profile Standard s:,,,,,,,, 0-. Other widths are also available on request. EMI Ladder is designed to give a maximum Cable Loading Capacity whilst retaining high strength. By utilizing high
More informationA14. external sliding system. 175kg max panel weight. 3m (h) x 4m (w) max panel size. side or top-fixed tracking. precision-ground bearings
A14 external sliding system 175kg max panel weight 3m (h) x 4m (w) max panel size side or top-fixed tracking precision-ground bearings A14 SLIDING HARDWARE SYSTEM A14: SLIDING SYSTEM Precision bearing
More informationCustom Sheet Metal Air Duct & Fittings Accessories Hardware & Fasteners HVAC Duct Systems & Custom Fittings
Custom Sheet Metal Air Duct & Fittings Accessories Hardware & Fasteners HVAC Duct Systems & Custom Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel 905-624-3854 / 905-290-2334
More informationMSG. model PEDESTRIAN GATES DESCRIPTIVE SPECIFICATIONS COMMON APPLICATIONS TYPICAL INSTALLATION SITES ALVARADOMFG.COM
model Our full height security gates look and function much better than an on site or custom fabricated gate. With several models to choose from, the can meet almost any application or requirement. COMMON
More informationRAM HD Steering Stabilizer Clamp Installation Instructions
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SYNERGY MFG. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF SYNERGY MFG IS PROHIBITIED. Revisions Rev. Description
More informationAny reference to OEM names or OEM product identification numbers/descriptions/pictures/model numbers is for identification only and does not indicate
135 EXHAUST COMPONENTS Chrome stack, curved style Dia Length Intel Material F247701 4 18 4 I.D. Chrome F247702 4 36 4 I.D. Chrome F247703 4 78 4 I.D. Chrome F247704 5 18 5 I.D. Chrome F247705 5 36 5 I.D.
More informationSTANDARD PRODUCTS CATALOG
STANDARD PRODUCTS CATALOG 1 NO. 1 SUMMER 01 We are not limited to the enclosed items. We have the ability to custom fabricate products to meet your needs. A few of the items we also fabricate are: Pipe
More informationCommercial Body Fittings 8th Edition. Door Hinge Raised Blade Zinc Plated & Stainless Steel. Door Hinge Raised Blade Zinc Plated & Stainless Steel
HINGES Commercial Body Fittings 8th Edition Door Hinge Raised Blade & No. HNVN731/SS wgt. 0.88kg l 30G Polished stainless steel No. HNVN731/ZP wgt. 0.88kg l mild steel Door Hinge Raised Blade & 22 85 105
More informationSteel Ladder Cable Trays & Accessories
Steel Ladder Cable Trays & Accessories CONTACT GIGA Enterprises Mr. Kostas Samaras Thermaikou 54, Nea Efkarpia 56429 Thessaloniki, Greece Email: info@gigaenterprises.com Phone: +30 698 695 9164 Website:
More informationElite Antennas Product Catalogue
Elite Antennas Product Catalogue Spun aluminium reflectors: 0.34m to 4.5m Elite Antenna manufacture spun, prime-focus aluminium reflectors for commercial, military and research applications. We offer a
More informationAT Line AT Models, USS/UAT Models, And UT Models 4 ft Nominal Width Units
4 ft Nominal Width Units 14-2E4 14-2F6 14-2E9 14-2F12 14-3E4 14-3F6 14-3E9 14-3F12 14-2F4 14-2G6 14-2F9 14-2G12 14-3F4 14-3G6 14-3F9 14-3G12 Page 2 of 11 7 ft Nominal Width Units 17-2G9 17-2G18 27-2G36
More informationPART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10
PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1
More informationInstallation Instructions. DISH 500+ and DISH 1000+
Installation Instructions DISH 500+ and DISH 1000+ Attention and Warning Symbols You must be aware of safety when you install and use this system. This guide provides various procedures. If you do some
More informationStructural Support Products. Wireless Site Solutions Ordering Guide Version 2.1
Structural Support Products Wireless Site Solutions Ordering Guide Version 2.1 TOWER MOUNTS G2 Series High Capacity Sector Frames Quick-Vee Medium Capacity Sector Frames Sector Frame Reinforcement Kits
More informationGeneral Cable Support Information
General Cable Support Information Applications Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels, or other devices
More informationCONFIGURATION OF CABLE SUPPORT SYSTEMs
CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)
More informationReduction wheel and hanger bearing stabilize and support the flight auger against the weight of the grain.
BIN unloading systems The Best Just Got Better Breaking away from the pack...gsi's redesigned Direct Gear Drive Bin Sweep is cleaning up the competition. A Direct Gear Drive sweep is the most convenient
More informationF3 Adjustable Tower Dual Stack Medical (With EVO Stack) F3ATM-E REV A
F3AT TOWER BOM (Quantities shown in table below are for (1) Tower. Actual quantity per machine is double.) PART NO. (EVO STACK)/QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt
More information100L. 942 mm. 335 mm 385 mm
1/5 Altea 60L Altea 100L Altea 60L pedal Body and pedal colour Lid and pedal base colour 100L 60L (pedal) 60L Easy Empty Avalilable colour for plastic bags "Slim-Fit" 942 mm 995 mm 910 mm OUTDOOR INDOOR
More informationCooper & Turner Ltd STRUCTURAL
Cooper & Turner Ltd STRUCTURAL Page 1 of 6 Dimensions of Fully Threaded Bolts/Setscrews CHARACTERISTIC STANDARD Thread d M12 M16 M20 M24 M30 M36 p (pitch) 1.75 2 2.5 3 3.5 4 a max. 5.3 6 7.5 9 10.5 12
More informationMiX 2310i with IP Housing. P r o d u c t I n f o r m a t i o n G u i d e
MiX 2310i with IP Housing P r o d u c t I n f o r m a t i o n G u i d e VISION 2 The MiX 2310i extends the MiX Telematics range of fleet tracking hardware, complementing the FM Communicator and FM Tracer
More informationHANGERS, STRUT, AND FITTINGS SUBMITTAL
HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam
More information5. STRAUB-FLEX / STRAUB-REP
5. STRAUB-FLEX / 5.1 STRAUB-FLEX For gas and water supply, sewage treatment, industrial plants, power plants and shipbuilding: STRAUB- FLEX is the optimal pipe joint. Suitable for suction or pressure lines,
More informationportable telescoping towers
portable telescoping towers 10m, 20m, and 30m Standard Heights N E L L O www.nelloinc.com N E L L O Founded in 2002 by a team of experienced engineering and manufacturing professionals, Nello has grown
More informationService Bulletin NO. 9 NO. 3
Service Bulletin 04-052 Applies To: 2005 CR-V ALL September 3, 2004 2005 CR-V: PDI and New Model Information This service bulletin gives you the information needed for PDI of the 2005 CR-V. It also describes
More informationINSTRUCTION MANUAL G-550
INSTRUCTION MANUAL G-550 VERTEX STANDARD CO., LTD. 4-8-8 Nakameguro, Meguro-Ku, Tokyo 153-8644, Japan VERTEX STANDARD US Headquarters 17210 Edwards Rd., Cerritos, CA 90703, U.S.A. International Division
More informationV
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT R1 0 8 0 8 set by hand or by optional RCU (Remote Control Unit) X 65 R2 X 65 4-Port Antenna / 65 /65 17.5/17.5dBi 0 8 /0 8 T Type
More informationWheatland Tube Company
Rigid Steel Conduit Hot-Dip Galvanized Rigid Nipples Elbows Couplings Running Thread Electrical Metallic Tubing (EMT) Elbows Rigid Aluminum Conduit Nipples Elbows Couplings Intermediate Metal Conduit (IMC)
More informationEC&N. Elbows, Couplings & Nipples
EC&N Elbows, Couplings & Nipples ELBOWS, COUPLINGS & NIPPLES Superior physical protection for electrical conductors Established in 1877, Wheatland Tube is the only conduit manufacturer that also produces
More informationSafety Ladders: Hot Dip Galvanized/Stainless Steel
Y-Spar Guide-rail profile: 50 x 32 mm. Comes with joint plate. Mounting brackets extra to order. Recommended mounting distance 1400 mm - max. 1680 mm. Installation of bracket to ladder is carried out through
More informationPFF WSP
3 February 2014 1050340 - FlowMax Fuel Filter Kit (I-00172) - 1 - Flowmax Filter Kits Installation Instructions This kit is designed for V3 Flomax pumps only P/N# P/N# 1050340-PFF 1050340-WSP PLEASE READ
More informationRemote Oil Filter Mount
Remote Oil Filter Mount Part No. ENV-140 Made in USA Important: Read these instructions in their entirety prior to installation. Rev 170925 Parts List 1 x ENV-140 remote filter mount 1 x M22x1.50 oil filter
More informationSTRAIGHT CONVEYOR UNITS AND RIGHT-ANGLE TRANSFER
FICHE TECHNIQUE AIRPORT \ In general, conveyor units injecting luggage on downstream conveyor units, positioned at 90, operate in two ways: Automatic direction Two directions, for flow separation and maintenance
More informationHolley Ford 351W Hi-Ram Modular Intake Manifold Kits
Holley Ford 351W Hi-Ram Modular Intake Manifold Kits Holley P/N Engine Application & Induction Configuration 300-241 Hi-Ram, 1 x 95mm LS Throttle Body (longitudinal mount) w/ port EFI provisions & fuel
More information