310J 310SJ 310SJ TMC 410J 410J TMC 710J

Transcription

1 . 5. M D I G G I N G D E P T H J DOZERS BACKHOES 0J 0SJ 0SJ TMC 0J 0J TMC 70J

2 Smart choices. 0J 6 kw ( hp) 695-kg (,0 lb.) operating weight.-m ( ft. in.) backhoe digging depth.6-kn (9,50 lb.) loader breakout force 996-kg (6,600 lb.) loader lift capacity 0J TMC 7 kw (9 hp) 66-kg (9,0 lb.) operating weight.90-m (6 ft. in.) backhoe digging depth 5.-kN (0,0 lb.) loader breakout force -kg (7,0 lb.) loader lift capacity 0SJ TMC 69 kw (9 hp) 7-kg (,07 lb.) operating weight.55-m ( ft. in.) backhoe digging depth 9.6-kN (,60 lb.) loader breakout force 6-kg (7,9 lb.) loader lift capacity Whether you use them as a shovel or your main machine, there s a J-Series Backhoe Loader to help you get it done. Loaded for bear or barely loaded, you ll benefit from proven John Deere advantages such as attachment interchangeability, ground-level daily servicing, industry-low maintenance costs, smooth and responsive hydraulics, and unsurpassed resale value. Enhancements such as an advanced multifunction diagnostic monitor, durable solid-state electronics, and improved cooling system make the J-Series even simpler to run and cheaper to keep. Plus, Total Machine Control (TMC) and tool carrier options raise the bar even higher, offering one-of-akind control and versatility. PAGES

3 0SJ 69 kw (9 hp) 650-kg (,50 lb.) operating weight.-m ( ft. 6 in.) backhoe digging depth 9.6-kN (,60 lb.) loader breakout force 6-kg (7,9 lb.) loader lift capacity 70J 9 kw (6 hp) 0 -kg (,000 lb.) operating weight 5.-m (7 ft. 0 in.) backhoe digging depth 69.-kN (5,50 lb.) loader breakout force -kg (9,77 lb.) loader lift capacity 0J 7 kw (9 hp) 69-kg (5,00 lb.) operating weight.-m (5 ft. 0 in.) backhoe digging depth 5.-kN (0,0 lb.) loader breakout force -kg (7,0 lb.) loader lift capacity Enhanced cooling package employs oil-to-water hydraulic and transmission coolers. Fewer stacked cores allow faster cold-weather warm-up, less plugging, and simplified cleanout. Total Machine Control (TMC) option features industryexclusive in-the-armrest joysticks for smooth fingertip control, exceptional fatigue-beating comfort, and enhanced productivity. State-of-the-art multi-function monitor with easy-to-read messaging, large analog gauges, and LED warning lights gives vital operating info at a glance. PowerTech wet-sleeve diesels deliver power without compromise and long-term durability. Tool carrier with quickcoupler boasts increased lift capability and best-in-class work-tool visibility plus set-and-forget parallel lift, return-to-carry, and boom height kick-out. It s available on either TMC machine.

4 Worksite Pro top-hook coupler allows quick and easy single-pin bucket changes. Accommo dates 05-, 56-, and 60-mm (,, and -in.) heavy-duty buckets. Optional limited-slip mechanical-front-wheel drive delivers 0 percent of available power to the wheel with the best traction. Engage it on the fly, for true all-wheel drive when and where you need it. Curved-knee loader-boom design enhances visibility and provides superior reach, easily dumping to the center of the truck. For fuller loads, faster. Simply more productive. Whether you re loading trucks, busting up blacktop, picking pipe, digging deep, or moving materials, J-Series Backhoes are more than up to it. Powerful and quick high-pressure hydraulics deliver generous breakout and lift capacity at both ends, along with impressive backhoe crowd power and swing torque. Excavator-style hydraulics smoothly blend functions, so your operators won t have to work hard to be more productive. The standard PowerShift transmission is also easy to operate, offering smooth, on-the-go clutchless shifting. Delivers faster acceleration, higher transport speed, and better hill-climbing capability, too. No other backhoe lineup offers a similar combination of power, speed, and ability. PAGES 5

5 Extendable dipperstick adds digging depth, reach, and ability. Outer-box design grasps objects such as concrete slabs between the bucket and gripper teeth while extending or retracting. For easier loading into trucks. J-Series Backhoes provide the swing-torque, boom, and dipperstick lift capacity needed to crane heavy objects. All front and rear attachments are interchangeable with those from previous John Deere backhoes. High-pressure hydraulics deliver smooth response, superior combined-function metering, and low-effort control regardless of the load or application. Rearward-angled, boxconstructed stabilizers and no-drift cylinders ensure rock-solid stability.

6 Do more without Armrest-mounted controls enable TMC backhoes to be operated with the seat rotated up to 90 degrees from the rear position. For those times when you need to focus on the action beside you. Choose the backhoe hydraulic speed you need. Fast for up to 0-percent quicker cycle times. Medium for normal digging. Or slow for craning objects, working in confined spaces, or excavating around existing utilities. Controls deliver the same low-effort, consistent response, regardless of hydraulic speed. With auto-idle, momentarily releasing the joysticks slows engine speed, reducing fuel consumption and noise. Preset speed automatically resumes when a joystick is activated. Backlit pushbuttons in the sealed switch module allow fingertip control of various functions such as returnto-dig. Go from backhoe- to excavator-style controls at the push of a button. Adjusting hydraulic flow when changing attachments is also pushbutton easy.

7 Want maximum productivity with minimal effort? Add the TMC package to a 0SJ or 0J Backhoe. You ll enjoy intuitive, effortless fingertip lifting a finger. Fatigue-beating joysticks provide smooth, intuitive control of auxiliary loader attachments, extendable dipperstick, backhoe auxiliary attachments, hammer, MFWD, and horn. control and up to 0-percent faster cycle times. Joysticks respond easily to an operator s touch, for quicker, smoother control of loader and backhoe functions. Controls are conveniently located in the armrests, so you can even operate the backhoe while facing to the side. There s also a unique mini-joystick that lets you run both loader and backhoe simultaneously without removing your hands from the controls. Need to reposition quickly or get unstuck? Mini-joystick lets you run the loader and backhoe simultaneously without removing your hands from the joysticks or swiveling the seat. Joystick switch provides fingertip control of hydraulicpowered attachments. Toggle on and off, or push and hold for momentary control. Armrestmounted switches operate the stabilizers. PAGES 6 7

8 Parallel-lift that s simply unparalleled. John Deere backhoes are already highly capable machines. Opt for a tool carrier on a TMCequipped 0SJ or 0J and take versatility to an even higher level. With the most accurate leveling system available on a backhoe loader, you ll have all the finesse you need to get more done. Unlike mechanical loader linkages, exclusive electrohydraulic parallel-lift employs fewer parts, so you ll spend less time on maintenance. And you won t have to worry about replacing current attachments, either. The quick-coupler lets you hook up to a variety of John Deere E- and G-Series as well as non-deere loader attachments. For versatility without parallel, opt for a John Deere tool carrier. PAGES 9

9 Low-profile loader knee is narrower through the line of sight, for a better view of the attachment. Visibility to the forks at truck-bed height is best in class. Worksite Pro quickcoupler lets you change attachments quickly and easily without leaving your seat. Accommodates a wide variety of attachments. Backlit pushbuttons give convenient control of boom height kickout, return-to-dig, and return-to-carry right from the seat. One-of-a-kind electrohydraulic design delivers unsurpassed capability. With true parallel-lift throughout the lift arc, it s perfect for a multitude of materialhandling tasks. Boom height kick-out sets maximum desired dump height, while return-to-carry and return-to-dig predetermine the lowered boom and bucket position. Helps speed production in repetitive loading applications. Unlike traditional designs, John Deere s tool carrier eliminates the Z-bar linkage, self-leveling rod, and numerous grease zerks.

10 Choose from joystick, pilot, two-lever, three-lever, four-lever, or SAE excavator-style controls. For smooth, combined-function metering. (Shown with pilot controls.) Advanced monitor provides: Vital and general operating information including hours, engine speed, and gear selection. Industry-exclusive onboard diagnostics of most sensors and switches for quick troubleshooting. Available machine security system prevents unauthorized machine movement. Requires pass code. Ride-control option smoothes moves over rough terrain, so full loads are more likely to arrive at their destination instead of somewhere in-between. Reduces operator fatigue, too. Comfortably ahead of the competition. Who wouldn t be more productive in the spacious, well-equipped cab of a J-Series Backhoe? Its expansive, curved windshield provides a virtually unobstructed panoramic view of the work at hand and surrounding jobsite. An automatic highvelocity climate-control system and fully adjustable suspension seat ensure year-round comfort. The state-of-the-art multifunction monitor with easyto-read messaging, large analog gauges, and LED warning lights gives vital operating info at a glance. Add to these amenities such as an AM/FM radio, -volt power ports, and generous storage space for cups and other carry-ons, and it s easy to see why your operators will be more comfortably productive. PAGES 0

11 Standard PowerShift transmission allows no-clutch on-the-go shifting on all machines. It s an industry exclusive on the 0J. Optional sound-suppression package significantly reduces noise levels and operator fatigue. With convenient handholds, self-cleaning steps, and wide entryways, getting to work has never been easier. Separate service and park brake systems provide an extra measure of security. No shortage of storage in here. There are cup holders, a place for a cell phone, and extra room for other carry-ons. Need to extend your workday? Deluxe lighting package provides unsurpassed 60-degree illumination (optional on 0J). TMC option (shown) includes a sculpted suspension seat with fully adjustable armrest-mounted joystick controls for all-day comfort. And near-effortless control. Tilt steering wheel is infinitely adjustable. Angles up and out of the way for swiveling the seat or passing through the cab. Highly efficient HVAC system with automotivestyle directional vents helps keep the view clear and the cab comfortable. You ve got cruise control in your pickup why not in your backhoes? Industryexclusive rotary throttle lets you dial-in the speed you need. Engaging the brakes automatically drops engine speed to idle. Auto-idle automatically reduces engine speed when hydraulics aren t in use. Reduces noise and preserves precious fuel. -volt power ports on both sides of the console provide convenient power for cell phones and other devices.

12 Totally welded mainframe resists torsional stress, absorbs shock loads, and delivers maximum strength. Simplifies service access to major components, too. Powertrain components are isolated from shock-load stress and individually removable to help speed repairs and downtime. Solid-state electrical system eliminates numerous relays and connectors for enhanced reliability. Headline Nothing lasts like a Deere. Built with state-of-the-art tools and techniques by a quality-conscious workforce at our worldclass facility in Dubuque, Iowa, J-Series Backhoes deliver unsurpassed reliability and uptime. Everything about these backhoes from their exceptionally durable one-piece, totally welded mainframe to their box-constructed loaders, booms, and dippersticks is designed for maximum uptime. When you know how they re built, you ll run a John Deere. PAGES

13 Engine hood is constructed of a resilient composite material that resists impacts and damage. Standard grille extensions further protect the front end. No more stacked hydraulic and transmission coolers in front of the radiator. With improved airflow, fan speed has been reduced for less debris build-up and noise. Cleanout is easier, too. Backhoe boom, dipperstick, stabilizers, and loader are box-constructed of low-alloy steel for maximum strength. Wet-sleeve liners provide uniform engine cooling and longer durability than cast-inblock designs. Large pins and replaceable bushings deliver long-term durability, and keep the backhoe and loader tightly secured and digging true. Sealed front axle and larger kingpins and differentials help ensure drivetrain durability. Unlike axles that rely on internal augers to direct oil to critical components, Deere s design provides fulltime, full-axle lubrication on any angle in any terrain. Planetary final drives distribute loads over three gears and are sealed in a cooling oil bath for long life and trouble-free service.

14 Headline Open wide and be awed. 500-hour engine and,000-hour hydraulic oil service intervals enable J-Series Backhoes to work longer between changes. Wide-mouth fuel tank allows fast, ground-level fill-ups. Generous capacity lets you work longer before refueling. Diagnostic test ports and available fluid-sample ports help speed preventative maintenance and troubleshooting. Compare routine maintenance costs with other backhoes during their first,000 hours. You ll discover what owners already know it costs less to run a Deere. Your John Deere dealer has the parts and service you need to stay productive, and offers a wide variety of preventative maintenance and support programs to help control costs.

15 Convenient lube and periodic maintenance chart ensures that nothing gets overlooked. Synthetic bushings in the loader linkage and extendable dipperstick eliminate numerous grease zerks. Vertical spin-on engine, transmission, and hydraulic filters and quick-release fuel filters allow quick, no-spill changes. Tilt the hood and discover the many advantages that make J-Series Backhoes the simplest, least expensive to maintain. Same-side groundlevel access to checkpoints makes quick work of the daily routine. Service intervals have been extended so you can work longer between changes. And because no maintenance beats low maintenance, self-adjusting serpentine belts, park brake, and wet-disc brakes seldom, if ever, require attention. With the John Deere J-Series, you ll spend less time and expense getting ready for work and more time getting work done. If something goes wrong, the monitor displays easyto-understand diagnostic information to get you back up and running quickly. Split floor mats and a large removable panel provide convenient, top-side access to internal components. PAGES 5

16 0J Engine 0J For use in U.S., Canada, and Europe For use outside U.S., Canada, and Europe Manufacturer and Model John Deere PowerTech TM E 05HT05 turbocharged, standard John Deere PowerTech 05T optional turbocharged Non-Road Emissions Standard EPA Tier /EU Stage IIIA EPA Tier /EU Stage II Displacement L (76 cu. in.).5 L (76 cu. in.) Net Peak Power (ISO99) kw ( rpm 59 kw (79 rpm Net Peak Torque (ISO99) Nm (70 rpm 0 Nm (50 rpm Net Torque Rise % % Lubrication pressure system with spin-on filter and cooler pressure system with spin-on filter and cooler Air Cleaner dual-stage dry type with safety element and evacuator valve dual-stage dry type with safety element and evacuator valve Cooling Fan Type suction Engine Coolant Rating deg. C ( deg. F) Engine Oil Cooler oil to water Powertrain Transmission speed, helical-cut gears, full PowerShift TM with hydraulic reverser standard; electric clutch cutoff on loader lever Torque Converter single stage, dual phase with.6: stall ratio; 0 mm ( in.) Maximum Travel Speeds with Standard Engine Forward Reverse Gear km/h (.5 mph) 7. km/h (.5 mph) Gear km/h (6.5 mph). km/h (. mph) Gear km/h (. mph) N/A Gear km/h (. mph) N/A Axles Axle Oscillations, Stop to Stop (both axles).... deg. Axle Ratings Mechanical-front- Standard wheel drive Rear Static kg 000 kg 000 kg (9,6 lb.) (6,55 lb.) (,660 lb.) Dynamic kg 6000 kg 7000 kg (5,7 lb.) (, lb.) (5, lb.) Ultimate kg 00 kg kg (7,6 lb.) (6,70 lb.) (67,6 lb.) Differentials hydraulic locking rear, electric, foot actuated; open front Steering (ISO500) hydrostatic power and emergency steering Axle Mechanicalfront-wheel drive Non-powered front Curb-Turning Radius With Brakes m ( ft. 9 in.). m ( ft. in.) Without Brakes m ( ft. 5 in.).9 m ( ft. in.) Bucket Clearance Circle With Brakes m ( ft. in.) 9.9 m ( ft. 5 in.) Without Brakes m (6 ft. in.) 0.76 m (5 ft. in.) Steering Wheel Turns (lock to lock) Final Drive (mechanical-front wheel and rear axle) heavy-duty, outboard planetary final drives distribute shock loads over gears Brakes (conform to ISO 50) Service power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing Parking spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control PAGES 6 7

17 Hydraulics 0J Main Pump open center, single gear Pump rpm Backhoe L/m ( gpm) Loader L/m ( gpm) System Relief Pressure Backhoe kpa (,65 psi) Loader kpa (,00 psi) Bucket Dump at Maximum Height sec. Boom Lower (power down) sec. Backhoe Controls two-lever manual standard; pilot controls with pattern select, three-lever manual controls with foot swing, and manual and/or electric auxiliary functions optional Loader Controls single-lever control with electric clutch cutoff switch standard; manual auxiliary function optional Cylinders Type heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Loader Boom () mm (.5 in.) 50 mm (.97 in.) 790 mm (.0 in.) Loader Bucket () mm (.5 in.) 50 mm (.97 in.) 7 mm (9.9 in.) Backhoe Boom () mm (. in.) 56 mm (.0 in.) mm (. in.) Backhoe Crowd () mm (. in.) 6 mm (. in.) 55 mm (.77 in.) Backhoe Bucket () mm (.5 in.) 50 mm (.97 in.) 9 mm (5. in.) Backhoe Swing () mm (.5 in.) 5 mm (.77 in.) 0 mm (.0 in.) Backhoe Extendable Dipperstick () mm (. in.) mm (.6 in.) 06 mm (. in.) Backhoe Stabilizer () mm (.5 in.) 50 mm (.97 in.) 500 mm (9.69 in.) Non-Powered Axle () mm (.76 in.) mm (.65 in.) mm (.9 in.) Mechanical-Front-Wheel Drive () mm (.6 in.) mm (.65 in.) 0 mm (.7 in.) Electrical Voltage volt Alternator Rating amp Lights halogen: front and rear (,500 candlepower each); turn signals and flashers front and rear; stop and tailights and rear reflectors Operator Station Type (SAE J00) canopy, isolation mounted, ROPS/FOPS, left/right access, with molded roof Tires/Wheels Front Rear Non-Powered Front Axle L-6 SL F- () 9.5L- R- (0) Mechanical-Front-Wheel Drive NHS SS- () 9.5L- R- (0) Serviceability Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element, Vertically Mounted micron filtration /,000 service hours Refill Capacities Cooling System L (6 qt.) Rear Axle L (9 qt.) Engine Oil (including vertical spin-on filter).... L ( qt.) Torque Converter and Transmission L (6 qt.) Fuel Tank (with ground-level fueling) L ( gal.) Hydraulic System L ( gal.) Hydraulic Reservoir L (0. gal.) Mechanical-Front-Wheel-Drive Housing Axle L (7 qt.) Planetary (each) L ( qt.) Operating Weights With Full Fuel Tank, 79-kg (75 lb.) Operator, and Standard Equipment kg (,0 lb.) Typical with Cab, Mechanical-Front-Wheel Drive, Extendable Dipperstick, and 5-kg (,000 lb.) Counterweight kg (6,0 lb.) Optional Components Cab kg (50 lb.) Mechanical-Front-Wheel Drive with Tires kg (70 lb.) Extendable Dipperstick kg (0 lb.) Front Loader Coupler kg (60 lb.) Backhoe Bucket Coupler kg (0 lb.)

18 Overall Dimensions 0J A Ground Clearance (minimum) mm ( in.) B Overall Length (transport) m ( ft. in.) C Width over Tires m (7 ft. in.) D Height to Top of ROPS/Cab m (9 ft. 0 in.) E Length from Axle to Axle Non-Powered Front Axle m (6 ft. in.) Mechanical-Front-Wheel-Drive Axle m (7 ft. 0 in.) G D N M L K P R S T F O Q A U V B E H C I J Backhoe Dimensions / Performance 0J Backhoe specifications are with 60-mm x 0.-m ( in. x 6.5 cu. ft.) bucket Bucket Range mm ( 0 in.) Digging Force Bucket Cylinder kn (,06 lb.) Crowd Cylinder kn (7,006 lb.) Swing Arc deg. Operator Control two levers Leveling Angle deg. Stabilizer Angle Rearward deg. With Standard With Optional Extendable Dipperstick Backhoe Retracted Extended F Loading Height (truck loading position) m (0 ft. in.). m ( ft. in.). m ( ft. in.) G Reach from Center of Swing Pivot m (7 ft. 0 in.) 5.5 m ( ft. in.) 6.5 m ( ft. 5 in.) H Reach from Center of Rear Axle m ( ft. in.) 6.5 m ( ft. 7 in.) 7.59 m ( ft. in.) I Digging Depth (SAE maximum) m ( ft. in.).9 m ( ft. 5 in.) 5.6 m (7 ft. in.) J Digging Depth (SAE) 60-mm ( ft.) Flat Bottom m ( ft. in.).7 m ( ft. in.) 5. m (7 ft. 0 in.) 0-mm ( ft.) Flat Bottom m ( ft. 0 in.).06 m ( ft. in.) 5. m (7 ft. 0 in.) K Stabilizer Width (transport) m (7 ft. in.). m (7 ft. in.). m (7 ft. in.) L Stabilizer Spread (operating) m (0 ft. in.).0 m (0 ft. in.).0 m (0 ft. in.) M Stabilizer Overall Width (operating) m ( ft. 7 in.).5 m ( ft. 7 in.).5 m ( ft. 7 in.) N Bucket Rotation deg. 90 deg. 90 deg. O Transport Height m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.) PAGES 9

19 Loader Dimensions / Performance 0J P Bucket Dump Angle (maximum) deg. Q Rollback Angle at Ground Level deg. Heavy-duty Heavy-duty Heavy-duty long lip Multipurpose Multipurpose Bucket Capacity m (.00 cu. yd.) 0.6 m (. cu. yd.) 0.96 m (.5 cu. yd.) 0.77 m (.00 cu. yd.) 0.96 m (.5 cu. yd.) Width mm (6 in.) mm (6 in.) mm (6 in.) 0 mm ( in.) mm (6 in.) Weight kg (00 lb.) 90 kg (60 lb.) 05 kg (9 lb.) 77 kg (,699 lb.) 795 kg (,750 lb.) Breakout Force kn (9,50 lb.). kn (9,500 lb.) 9.9 kn (,975 lb.) 7. kn (,75 lb.) 6. kn (,75 lb.) Lift Capacity (full height) kg (6,600 lb.) 076 kg (6,775 lb.) 9 kg (6,75 lb.) 55 kg (5,65 lb.) 757 kg (,75 lb.) R Height to Bucket Hinge Pin (maximum) m ( ft. in.). m ( ft. in.). m ( ft. in.). m ( ft. in.). m ( ft. in.) S Dump Clearance (bucket at 5 deg.) m ( ft. 0 in.).69 m ( ft. 0 in.). m ( ft. in.).59 m ( ft. 6 in.).59 m ( ft. 6 in.) T Reach at Full Height (bucket at 5 deg.) mm (0.9 in.) 767 mm (0. in.) 09 mm (.9 in.) mm (. in.) mm (. in.) U Digging Depth Below Ground (bucket level) mm (6. in.) 75 mm (6.9 in.) 7 mm (5. in.) 97 mm (7. in.) 97 mm (7. in.) V Length From Front Axle Centerline to Bucket Cutting Edge m (6 ft. in.).0 m (6 ft. in.). m (7 ft. in.).5 m (7 ft. in.).0 m (7 ft. in.) Lift Capacity with Quick-Coupler / Forks Hydraulic Capacity mm ( in.) tines 5-mm (60 in.) tines A' Maximum Height kg (,50 lb.) 556 kg (,0 lb.) B' Maximum Reach kg (5,95 lb.) 67 kg (5, lb.) C' At Ground Line kg (7,700 lb.) 69 kg (7,07 lb.) D' Below Ground Line mm (0. in.) 6 mm (0. in.) A' B' C' D' Lift capacities are over-end values in kg (lb.) according to SAE J. Figures listed are 7% of the maximum lift force available. Base vehicle includes counterweight. 0J Backhoe with Standard Dipperstick 0J Backhoe with.07-m ( ft. 6 in.) Extendable Dipperstick, Retracted 0J Backhoe with.07-m ( ft. 6 in.) Extendable Dipperstick, Extended (,59) 66 (,) 0 (,7) 00 (,67) 9 (,) 9 (,966) 005 (,0) 7 (,) 7 (,050) 59 (,775) 5 (,7) 7 (,96) 07 (,6) 6 (,00) 5 (,067) 07 (,66) 5 (,7) 5 (,9) 5 (,96) 0 (,75) 056 (,5) DIPPER 5 (,55) 96 (,5) 6 (,) DIPPER DIPPER 7 (7,656) WITH 5 (,75) (,) (,76) (,79) (6,55) WITH WITH AT (,65) 056 (,7) 77 (,99) 79 (,70) AT 65 AT 65 5 (,55) (,7) (,697) 0 SWING PIVOT SWING PIVOT SWING PIVOT (,5) 969 (,6) 750 (,65) 07 (,66) 9 (,05) 7 (,6) 00 (,9) 900 (,9) 76 (,579) 0 (,6) 76 (,9) 706 (,557) 00 (,) 6 (,9) 70 (,59) 7 (,575) 0 FEET METERS FEET METERS FEET METERS For more detailed spec information and available options, log on to

20 0SJ Engine 0SJ For use in U.S., Canada, and Europe For use outside U.S., Canada, and Europe Manufacturer and Model John Deere PowerTech TM E 05HT05 turbocharged, standard John Deere PowerTech 05T turbocharged, standard* Non-Road Emissions Standard EPA Tier /EU Stage IIIA EPA Tier /EU Stage II Displacement L (76 cu. in.).5 L (76 cu. in.) Net Peak Power (ISO99) kw (9 rpm 69 kw (9 rpm Net Peak Torque (ISO99) Nm ( rpm Nm ( rpm Net Torque Rise % 6% Lubrication pressure system with spin-on filter and cooler pressure system with spin-on filter and cooler Air Cleaner dual-stage dry type with safety element and evacuator valve dual-stage dry type with safety element and evacuator valve *This engine not available on 0SJ TMC. Cooling Fan Type suction Engine Coolant Rating deg. C ( deg. F) Engine Oil Cooler oil to water Powertrain Transmission speed, helical-cut gears, full PowerShift TM with hydraulic reverser standard; electric clutch cutoff on loader lever Torque Converter single stage, dual phase with.6: stall ratio; 0 mm ( in.) Maximum Travel Speeds with Standard Engine Forward Reverse Gear km/h (.5 mph) 7. km/h (.5 mph) Gear km/h (6.5 mph). km/h (. mph) Gear km/h (. mph). km/h (. mph) Gear km/h (.5 mph) N/A Axles Axle Oscillations, Stop to Stop (both axles).... deg. Axle Ratings Mechanical- Standard front-wheel drive Rear Static kg 000 kg 000 kg (9,6 lb.) (6,55 lb.) (,660 lb.) Dynamic kg 6000 kg 7000 kg (5,7 lb.) (, lb.) (5, lb.) Ultimate kg 00 kg kg (7,6 lb.) (6,70 lb.) (67,6 lb.) Differentials hydraulic locking rear, electric, foot actuated; limited slip front Steering (ISO500) hydrostatic power and emergency steering Axle Mechanicalfront-wheel drive Non-powered front Curb-Turning Radius With Brakes m ( ft. 9 in.). m ( ft. in.) Without Brakes m ( ft. 5 in.).9 m ( ft. in.) Bucket Clearance Circle With Brakes m ( ft. in.) 9.9 m ( ft. 5 in.) Without Brakes m (6 ft. in.) 0.76 m (5 ft. in.) Steering Wheel Turns (lock to lock) Final Drive (mechanical-front wheel and rear axle) heavy-duty, outboard planetary final drives distribute shock loads over gears Brakes (conform to ISO 50) Service power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing Parking spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control PAGES 0

21 Hydraulics 0SJ Main Pump open center, gear type, tandem with unloader Pump rpm Backhoe L/m (6 gpm) Loader L/m ( gpm) System Relief Pressure Backhoe kpa (,65 psi) Loader kpa (,65 psi) Backhoe Controls two-lever manual standard; pilot controls with pattern select, three-lever manual controls with foot swing, and manual and/or electric auxiliary functions optional Loader Controls single-lever control with electric clutch cutoff switch standard; manual auxiliary function optional Cylinders Type heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Loader Boom () mm (.5 in.) 50 mm (.97 in.) 790 mm (.0 in.) Loader Bucket () mm (.5 in.) 50 mm (.97 in.) 7 mm (9.9 in.) Backhoe Boom () mm (.7 in.) 56 mm (.0 in.) 795 mm (.0 in.) Backhoe Crowd () mm (.5 in.) 6 mm (. in.) 60 mm (.7 in.) Backhoe Bucket () mm (.5 in.) 56 mm (.0 in.) 0 mm (.9 in.) Heavy-Duty Option () mm (.9 in.) 6 mm (. in.) 0 mm (.9 in.) Backhoe Swing () mm (.5 in.) 50 mm (.97 in.) 7 mm (0.9 in.) Backhoe Extendable Dipperstick () mm (.76 in.) 0 mm (.57 in.) 067 mm (.0 in.) Backhoe Stabilizer Standard () mm (.5 in.) 50 mm (.97 in.) 500 mm (9.69 in.) Longer Optional () mm (.9 in.) 50 mm (.97 in.) 500 mm (9.69 in.) Non-Powered Axle () mm (.76 in.) mm (.65 in.) mm (.9 in.) Mechanical-Front-Wheel Drive () mm (.6 in.) mm (.65 in.) 0 mm (.7 in.) Electrical Voltage volt Alternator Rating amp Lights halogen: front and rear (,500 candlepower each); turn signals and flashers front and rear; stop and tailights and rear reflectors Operator Station Type (SAE J00) canopy, isolation mounted, ROPS/FOPS, left/right access, with molded roof Tires/Wheels Front Rear Non-Powered Front Axle L-6 SL F- () 9.5L- R- (0) Mechanical-Front-Wheel Drive /0- I- (0) 9.5L- R- (0) 0/0R XMCL 500/70R XMCL Serviceability Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element, Vertically Mounted micron filtration /,000 service hours Refill Capacities Cooling System L (6 qt.) Rear Axle L (9 qt.) Engine Oil (including vertical spin-on filter).... L ( qt.) Torque Converter and Transmission L (6 qt.) Fuel Tank (with ground-level fueling) L ( gal.) Hydraulic System L ( gal.) Hydraulic Reservoir L (0. gal.) Mechanical-Front-Wheel-Drive Housing Axle L (7 qt.) Planetary (each) L ( qt.) Operating Weights With Full Fuel Tank, 79-kg (75 lb.) Operator, and Standard Equipment kg (,50 lb.) Typical with Cab, Mechanical-Front-Wheel Drive, Extendable Dipperstick, and 5-kg (,000 lb.) Counterweight kg (7,00 lb.) Optional Components Cab kg (50 lb.) Mechanical-Front-Wheel Drive with Tires kg (5 lb.) Extendable Dipperstick kg (90 lb.) Front Loader Coupler kg (60 lb.) Backhoe Bucket Coupler kg ( lb.)

22 Overall Dimensions 0SJ A Ground Clearance (minimum) mm ( in.) B Overall Length (transport) m ( ft. 6 in.) C Width over Tires m (7 ft. in.) D Height to Top of ROPS/Cab m (9 ft. in.) E Length from Axle to Axle Non-Powered Front Axle m (6 ft. in.) Mechanical-Front-Wheel-Drive Axle m (7 ft. 0 in.) G D N M L K P T F R O S Q A U V B E H C I J Backhoe Dimensions / Performance 0SJ Backhoe specifications are with 60-mm x 0.-m ( in. x 7.5 cu. ft.) bucket Bucket Range mm ( 0 in.) Digging Force Bucket Cylinder kn (,990 lb.) With Heavy-Duty Cylinder Option kn (5,6 lb.) Crowd Cylinder kn (,090 lb.) Swing Arc deg. Operator Control two levers With Standard With Optional Extendable Dipperstick Backhoe Retracted Extended F Loading Height (truck loading position) m ( ft. in.). m ( ft. in.).9 m ( ft. in.) G Reach from Center of Swing Pivot m ( ft. in.) 5.66 m ( ft. 7 in.) 6.6 m ( ft. in.) H Reach from Center of Rear Axle m ( ft. 9 in.) 6.7 m ( ft. in.) 7.7 m (5 ft. in.) I Digging Depth (SAE maximum) m ( ft. 6 in.).55 m ( ft. in.) 5.6 m ( ft. 5 in.) J Digging Depth (SAE) 60-mm ( ft.) Flat Bottom m ( ft. in.).50 m ( ft. 9 in.) 5.56 m ( ft. in.) 0-mm ( ft.) Flat Bottom m ( ft. in.).9 m ( ft. 9 in.) 5. m (7 ft. 6 in.) K Stabilizer Width (transport) m (7 ft. in.). m (7 ft. in.). m (7 ft. in.) L Stabilizer Spread (operating) Standard Stabilizers m (0 ft. in.).0 m (0 ft. in.).0 m (0 ft. in.) Long Stabilizers m ( ft. in.).5 m ( ft. in.).5 m ( ft. in.) M Stabilizer Overall Width (operating) Standard Stabilizers m ( ft. 7 in.).5 m ( ft. 7 in.).5 m ( ft. 7 in.) Long Stabilizers m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.) N Bucket Rotation deg. 90 deg. 90 deg. O Transport Height m ( ft. 6 in.). m ( ft. 5 in.). m ( ft. 5 in.) PAGES

23 Loader Dimensions / Performance 0SJ P Bucket Dump Angle (maximum) deg. Q Rollback Angle at Ground Level deg. Heavy-duty Heavy-duty Heavy-duty long lip Heavy-duty Multipurpose Multipurpose Bucket Capacity m 0.6 m 0.96 m.00 m 0.96 m.00 m (.00 cu. yd.) (. cu. yd.) (.5 cu. yd.) (. cu. yd.) (.5 cu. yd.) (. cu. yd.) Width mm (6 in.) mm (6 in.) mm (6 in.) 7 mm (9 in.) mm (6 in.) 7 mm (9 in.) Weight kg (00 lb.) 90 kg (60 lb.) 05 kg (9 lb.) 5 kg (, lb.) 795 kg (,750 lb.) 7 kg (,00 lb.) Breakout Force kn (,60 lb.) 9. kn (,05 lb.) 5. kn (0,0 lb.) 5. kn (0,00 lb.). kn (9,700 lb.).9 kn (9,650 lb.) Lift Capacity (full height) kg (7,9 lb.) kg (7,5 lb.) kg (7,0 lb.) 69 kg (7,00 lb.) 0 kg (6,700 lb.) 996 kg (6,600 lb.) R Height to Bucket Hinge Pin (maximum) m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.) S Dump Clearance (bucket at 5 deg.) m ( ft. 0 in.).69 m ( ft. 0 in.). m ( ft. in.).6 m ( ft. in.).6 m ( ft. 7 in.).6 m ( ft. 7 in.) T Reach at Full Height (bucket at 5 deg.) mm (0.9 in.) 767 mm (0. in.) 9 mm (5.9 in.) 765 mm (0. in.) mm (. in.) mm (. in.) U Digging Depth Below Ground (bucket level) mm (6. in.) 75 mm (6.9 in.) 7 mm (5. in.) 06 mm (. in.) 5 mm (7. in.) 5 mm (7. in.) V Length From Front Axle Centerline to Bucket Cutting Edge m (6 ft. in.).0 m (6 ft. in.). m (7 ft. in.).0 m (6 ft. in.).0 m (7 ft. in.).5 m (7 ft. in.) Lift Capacity with Quick-Coupler / Forks Hydraulic Capacity mm ( in.) tines A' Maximum Height kg (,570 lb.) B' Maximum Reach kg (6,97 lb.) C' At Ground Line kg (9, lb.) D' Below Ground Line mm (. in.) 5-mm (60 in.) tines 9 kg (,70 lb.) 00 kg (6,6 lb.) kg (,56 lb.) mm (. in.) A' B' C' D' Lift capacities are over-end values in kg (lb.) according to SAE J. Figures listed are 7% of the maximum lift force available. Base vehicle includes counterweight. 0SJ Backhoe with Standard Dipperstick 0SJ Backhoe with.07-m ( ft. 6 in.) Extendable Dipperstick, Retracted 0SJ Backhoe with.07-m ( ft. 6 in.) Extendable Dipperstick, Extended (5,55) 699 (,75) 99 (,) 5 (,9) (,67) 99 (,) (5,66) 659 (,65) 5 (,9) 5 (,95) 997 (,97) (,9) 6 (5,75) 60 (,57) 0 (5,07) (,09) (,55) 99 (,) 99 (6,609) 55 (,06) 59 (5,7) DIPPER (,95) 50 (,7) 979 (,5) DIPPER DIPPER 566 (,9) WITH 6 (,76) 70 9 (,6) 67 (,69) 965 (,7) WITH (,) WITH AT 65 (,5) 57 (,77) 99 (,90) 99 (,09) AT 65 AT 65 (,05) (,6) (,05) 0 SWING PIVOT SWING PIVOT SWING PIVOT 6 (,95) (,606) 9 (,0) 95 (,5) 50 (,56) 906 (,997) 6 (,70) 7 (,) 96 (,975) 5 (,7) 7 (,6) 9 (,97) 9 (,7) 0 (,5) 90 (,9) 500 (,06) 9 (,05) 0 FEET METERS FEET METERS FEET METERS For more detailed spec information and available options, log on to

24 0SJ with Total Machine Control TM See page 0 for Engine, Cooling, and Powertrain information. Hydraulics 0SJ TMC Main Pump pressure-compensated load-sensing (PCLS) axial piston Pump rpm Backhoe L/m ( gpm) Loader L/m ( gpm) System Relief Pressure Backhoe kpa (,65 psi) Loader kpa (,65 psi) Backhoe Controls TMC electrohydraulic controls standard; auxiliary functions optional Loader Controls TMC electrohydraulic controls standard; auxiliary function and TMC tool carrier optional Cylinders Type heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Loader Boom () mm (.5 in.) 50 mm (.97 in.) 790 mm (.0 in.) Tool-Carrier Option () mm (.5 in.) 50 mm (.97 in.) 67.9 mm (6.9 in.) Loader Bucket () mm (.5 in.) 50 mm (.97 in.) 7 mm (9.9 in.) Tool-Carrier Option () mm (.9 in.) 56 mm (.0 in.) 79. mm (.7 in.) Backhoe Boom () mm (.7 in.) 56 mm (.0 in.) 795 mm (.0 in.) Backhoe Crowd () mm (.5 in.) 6 mm (. in.) 60.5 mm (.7 in.) Backhoe Bucket () mm (.9 in.) 6 mm (. in.) 0 mm (.9 in.) Backhoe Swing () mm (.5 in.) 50 mm (.97 in.) 7 mm (0.9 in.) Backhoe Extendable Dipperstick () mm (.76 in.) 0 mm (.57 in.) 067 mm (.0 in.) Backhoe Stabilizer Standard () mm (.5 in.) 50 mm (.97 in.) 500 mm (9.69 in.) Longer Optional () mm (.9 in.) 50 mm (.97 in.) 500 mm (9.69 in.) Non-Powered Axle () mm (.76 in.) mm (.65 in.) mm (.9 in.) Mechanical-Front-Wheel Drive () mm (.6 in.) mm (.65 in.) 0 mm (.7 in.) Electrical Voltage volt Alternator Rating amp Lights halogen: front and rear (,500 candlepower each); turn signals and flashers front and rear; stop and tailights and rear reflectors Operator Station Type (SAE J00) canopy, isolation mounted, ROPS/FOPS, left/right access, with molded roof Tires/Wheels Front Rear Non-Powered Front Axle L-6 SL F- () 9.5L- R- (0) Mechanical-Front-Wheel Drive /0- I- (0) 9.5L- R- (0) 0/0R XMCL 500/70R XMCL Serviceability Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element, Vertically Mounted micron filtration /,000 service hours Refill Capacities Cooling System L (6 qt.) Rear Axle L (9 qt.) Engine Oil (including vertical spin-on filter).... L ( qt.) Torque Converter and Transmission L (6 qt.) Fuel Tank (with ground-level fueling) L ( gal.) Hydraulic System L ( gal.) Hydraulic Reservoir L (0. gal.) Mechanical-Front-Wheel-Drive Housing Axle L (7 qt.) Planetary (each) L ( qt.) PAGES 5

25 Operating Weights 0SJ TMC With Full Fuel Tank, 79-kg (75 lb.) Operator, and Standard Equipment (Cab, Extendable Dipperstick, and 567-kg [,50 lb.] Counterweight) kg (,07 lb.) Optional Components Tool Carrier (includes mechanical-frontwheel drive) kg (,06 lb.) Backhoe Bucket Coupler kg ( lb.) Overall Dimensions A Ground Clearance (minimum) mm ( in.) B Overall Length (transport) m ( ft. 6 in.) C Width over Tires m (7 ft. in.) D Height to Top of ROPS/Cab m (9 ft. in.) E Length from Axle to Axle Non-Powered Front Axle m (6 ft. in.) Mechanical-Front-Wheel-Drive Axle m (7 ft. 0 in.) G D N M L K P R S T F O Q A U V B E H C I J Backhoe Dimensions / Performance 0SJ TMC Backhoe specifications are with 60-mm x 0.-m ( in. x 7.5 cu. ft.) bucket Bucket Range mm ( 0 in.) Digging Force Bucket Cylinder kn (5,6 lb.) Crowd Cylinder kn (,090 lb.) Swing Arc deg. Operator Control two joysticks With Extendable Dipperstick Retracted Extended F Loading Height (truck loading position) m ( ft. in.).9 m ( ft. in.) G Reach from Center of Swing Pivot m ( ft. 7 in.) 6.6 m ( ft. in.) H Reach from Center of Rear Axle m ( ft. in.) 7.7 m (5 ft. in.) I Digging Depth (SAE maximum) m ( ft. in.) 5.6 m ( ft. 5 in.) J Digging Depth (SAE) 60-mm ( ft.) Flat Bottom m ( ft. 9 in.) 5.56 m ( ft. in.) 0-mm ( ft.) Flat Bottom m ( ft. 9 in.) 5. m (7 ft. 6 in.) K Stabilizer Width (transport) m (7 ft. in.). m (7 ft. in.) L Stabilizer Spread (operating) Standard Stabilizers m (0 ft. in.).0 m (0 ft. in.) Long Stabilizers m ( ft. in.).5 m ( ft. in.) M Stabilizer Overall Width (operating) Standard Stabilizers m ( ft. 7 in.).5 m ( ft. 7 in.) Long Stabilizers m ( ft. in.).0 m ( ft. in.) N Bucket Rotation deg. 90 deg. O Transport Height m ( ft. 5 in.). m ( ft. 5 in.)

26 Loader Dimensions / Performance (See page 5 for line art) 0SJ TMC P Bucket Dump Angle (maximum) deg. Q Rollback Angle at Ground Level deg. Heavy-duty Heavy-duty Heavy-duty long lip Heavy-duty Multipurpose Multipurpose Bucket Capacity m 0.6 m 0.96 m.00 m 0.96 m.00 m (.00 cu. yd.) (. cu. yd.) (.5 cu. yd.) (. cu. yd.) (.5 cu. yd.) (. cu. yd.) Width mm (6 in.) mm (6 in.) mm (6 in.) 7 mm (9 in.) mm (6 in.) 7 mm (9 in.) R Height to Bucket Hinge Pin (maximum) m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.) Standard Loader Option Weight kg (00 lb.) 90 kg (60 lb.) 05 kg (9 lb.) 5 kg (, lb.) 795 kg (,750 lb.) 7 kg (,00 lb.) Breakout Force kn (,60 lb.) 9. kn (,05 lb.) 5. kn (0,0 lb.) 5. kn (0,00 lb.). kn (9,700 lb.).9 kn (9,650 lb.) Lift Capacity (full height) kg (7,9 lb.) kg (7,5 lb.) kg (7,0 lb.) 69 kg (7,00 lb.) 0 kg (6,700 lb.) 996 kg (6,600 lb.) S Dump Clearance (bucket at 5 deg.) m ( ft. 0 in.).69 m ( ft. 0 in.). m ( ft. in.).6 m ( ft. in.).6 m ( ft. 7 in.).6 m ( ft. 7 in.) T Reach at Full Height (bucket at 5 deg.) mm (0.9 in.) 767 mm (0. in.) 9 mm (5.9 in.) 765 mm (0. in.) mm (. in.) mm (. in.) U Digging Depth Below Ground (bucket level) mm (6. in.) 75 mm (6.9 in.) 7 mm (5. in.) 06 mm (. in.) 5 mm (7. in.) 5 mm (7. in.) V Length From Front Axle Centerline to Bucket Cutting Edge m (6 ft. in.).0 m (6 ft. in.). m (7 ft. in.).0 m (6 ft. in.).0 m (7 ft. in.).5 m (7 ft. in.) Tool-Carrier Loader Option Weight kg (5 lb.) 96 kg (7 lb.) 90 kg (60 lb.) 9 kg (,05 lb.) 766 kg (,67 lb.) 79 kg (,77 lb.) Breakout Force kn (,7 lb.) 5.9 kn (,900 lb.) 5. kn (0,00 lb.) 50.9 kn (,50 lb.). kn (9,70 lb.). kn (9,60 lb.) Lift Capacity (full height) kg (7,06 lb.) 69 kg (7,00 lb.) 00 kg (6,65 lb.) 76 kg (7,5 lb.) 70 kg (5,950 lb.) 656 kg (5,50 lb.) S Dump Clearance (bucket at 5 deg.) m ( ft. 6 in.).6 m ( ft. 7 in.).5 m ( ft. in.).59 m ( ft. 6 in.).50 m ( ft. in.).50 m ( ft. in.) T Reach at Full Height (bucket at 5 deg.) mm (0.6 in.) 7 mm (9. in.) 6 mm (. in.) 76 mm (0.0 in.) 6 mm (.9 in.) 6 mm (.9 in.) U Digging Depth Below Ground (bucket level) mm (5.5 in.) 0 mm (5.5 in.) mm (. in.) 0 mm (5.5 in.) 5 mm (6.0 in.) 5 mm (6.0 in.) V Length From Front Axle Centerline to Bucket Cutting Edge m (7 ft. in.).5 m (7 ft. in.).0 m (7 ft. 7 in.).5 m (7 ft. in.). m (7 ft. 7 in.).7 m (7 ft. 5 in.) Lift Capacity with Quick-Coupler / Forks Hydraulic Capacity mm ( in.) tines 5-mm (60 in.) tines A' Maximum Height kg (,75 lb.) 05 kg (,56 lb.) B' Maximum Reach kg (7,50 lb.) 9 kg (7,6 lb.) C' At Ground Line kg (9,700 lb.) 0 kg (9,5 lb.) D' Below Ground Line mm (. in.) mm (. in.) A' B' C' Lift capacities are over-end values in kg (lb.) according to SAE J. Figures listed are 7% of the maximum lift force available. Base vehicle includes counterweight. D' 0SJ TMC Backhoe with.07-m ( ft. 6 in.) Extendable Dipperstick, Retracted 0SJ TMC Backhoe with.07-m ( ft. 6 in.) Extendable Dipperstick, Extended SWING PIVOT 99 (,) 5 (,9) (,67) 99 (,) 59 5 (,9) 5 (,95) 997 (,97) (,9) 0 (5,07) (,09) (,55) 99 (,) 59 (5,7) (,95) 50 (,7) 979 (,5) DIPPER DIPPER 70 9 (,6) 67 (,69) 965 (,7) WITH (,) WITH 57 (,77) 99 (,90) 99 (,09) AT 65 AT 65 7 (,6) (,606) 50 (,56) 7 (,) 7 (,6) 0 (,5) 500 (,06) 0 0 SWING PIVOT 9 (,05) 0 9 (,0) 906 (,997) 96 (,975) 9 (,97) 90 (,9) 9 (,05) 0 FEET METERS FEET METERS PAGES 6 7

27 0J Engine 0J For use in U.S., Canada, and Europe For use outside U.S., Canada, and Europe Manufacturer and Model John Deere PowerTech TM E 05HT05 turbocharged, standard John Deere 05T PowerTech turbocharged, standard* Non-Road Emissions Standard EPA Tier /EU Stage IIIA EPA Tier /EU Stage II Displacement L (76 cu. in.).5 L (76 cu. in.) Net Peak Power (ISO99) kw (9 rpm 7 kw (96 rpm Net Peak Torque (ISO99) Nm (06 rpm 7 Nm (7 rpm Net Torque Rise % 6% Lubrication pressure system with spin-on filter and cooler pressure system with spin-on filter and cooler Air Cleaner dual-stage dry type with safety element and evacuator valve dual-stage dry type with safety element and evacuator valve *This engine not available on 0J TMC. Cooling Fan Type suction Engine Coolant Rating deg. C ( deg. F) Engine Oil Cooler oil to water Powertrain Transmission speed, helical-cut gears, full PowerShift TM with hydraulic reverser standard; electric clutch cutoff on loader lever Torque Converter single stage, dual phase with.6: stall ratio; 0 mm ( in.) Maximum Travel Speeds with Standard Engine Forward Reverse Gear km/h (.7 mph) 7. km/h (.6 mph) Gear km/h (6.7 mph).6 km/h (.5 mph) Gear km/h (.6 mph).6 km/h (. mph) Gear km/h (. mph) N/A Axles Axle Oscillations, Stop to Stop (both axles).... deg. Axle Ratings Mechanical- Standard front-wheel drive Rear Static kg 000 kg 000 kg (9,6 lb.) (6,55 lb.) (,660 lb.) Dynamic kg 6000 kg 7000 kg (5,7 lb.) (, lb.) (5, lb.) Ultimate kg 00 kg kg (7,6 lb.) (6,70 lb.) (67,6 lb.) Differentials hydraulic locking rear, electric, foot actuated; limited slip front Steering (ISO500) hydrostatic power and emergency steering Axle Mechanicalfront-wheel drive Non-powered front Curb-Turning Radius With Brakes m ( ft. 9 in.). m ( ft. in.) Without Brakes m ( ft. 5 in.).9 m ( ft. in.) Bucket Clearance Circle With Brakes m ( ft. in.) 9.9 m ( ft. 5 in.) Without Brakes m (6 ft. in.) 0.76 m (5 ft. in.) Steering Wheel Turns (lock to lock, flow amplified) to.6. to. Final Drive Mechanical-Front Wheel heavy-duty, outboard planetary final drives distribute shock loads over gears Rear Axle heavy-duty, outboard planetary final drives distribute shock loads over gears Brakes (conform to ISO 50) Service power assisted, hydraulic wet disc, mounted inboard, self-adjusting and self-equalizing Parking spring-applied, hydraulically released, wet, multi disc, independent of service brakes with electric switch control

28 Hydraulics 0J Main Pump pressure-compensated load sensing (PCLS), axial piston Pump rpm Backhoe L/m ( gpm) Loader L/m ( gpm) System Relief Pressure Backhoe kpa (,65 psi) Loader kpa (,65 psi) Backhoe Controls two-lever manual standard; pilot controls with pattern select, three-lever manual controls with foot swing, and manual and/or electric auxiliary functions optional Loader Controls single-lever control with electric clutch cutoff switch standard; manual auxiliary function optional Cylinders Type heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Loader Boom () mm (.5 in.) 50 mm (.97 in.) 790 mm (.0 in.) Loader Bucket () mm (.5 in.) 50 mm (.97 in.) 7 mm (9.9 in.) Backhoe Boom () mm (.9 in.) 6 mm (. in.) 97 mm (5. in.) Backhoe Crowd () mm (.5 in.) 6 mm (. in.) 69 mm (7.9 in.) Backhoe Bucket () mm (.9 in.) 6 mm (. in.) 0 mm (.9 in.) Backhoe Swing () mm (.5 in.) 50 mm (.97 in.) 7 mm (0.9 in.) Backhoe Extendable Dipperstick () mm (.76 in.) 0 mm (.57 in.) mm (7.7 in.) Backhoe Stabilizer, Standard () mm (.9 in.) 50 mm (.97 in.) 500 mm (9.69 in.) Non-Powered Axle () mm (.76 in.) mm (.65 in.) mm (.9 in.) Mechanical-Front-Wheel Drive () mm (.6 in.) mm (.65 in.) 0 mm (.7 in.) Electrical Voltage volt Alternator Rating amp Lights halogen: front and rear (,500 candlepower each); turn signals and flashers front and rear; stop and tailights and rear reflectors Operator Station Type (SAE J00) canopy, isolation mounted, ROPS/FOPS, left/right access, with molded roof Tires/Wheels Front Rear Non-Powered Front Axle L-6 SL F- () 9.5L- R- (0).5/75-6. SL F- (0) L- R- (0) Mechanical-Front-Wheel Drive /0- I- (0) 9.5L- R- (0) 0/0R XMCL 500/70R XMCL.5/0- I- (0) L- R- (0) Serviceability Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element, Vertically Mounted micron filtration /,000 service hours Refill Capacities Cooling System L (6 qt.) Rear Axle L (9 qt.) Engine Oil (including vertical spin-on filter).... L ( qt.) Torque Converter and Transmission L (6 qt.) Fuel Tank (with ground-level fueling) L ( gal.) Hydraulic System L (5 gal.) Hydraulic Reservoir L (0. gal.) Mechanical-Front-Wheel-Drive Housing Axle L (7 qt.) Planetary (each) L ( qt.) Operating Weights With Full Fuel Tank, 79-kg (75 lb.) Operator, and Standard Equipment kg (5,00 lb.) Typical with Cab, Mechanical-Front-Wheel Drive, Extendable Dipperstick, and 5-kg (,000 lb.) Counterweight kg (,50 lb.) Optional Components Cab kg (50 lb.) Mechanical-Front-Wheel Drive with Tires kg (5 lb.) Extendable Dipperstick kg (6 lb.) Front Loader Coupler kg (60 lb.) Backhoe Bucket Coupler kg ( lb.) PAGES 9

29 Overall Dimensions 0J A Ground Clearance (minimum) mm ( in.) B Overall Length (transport) m ( ft. in.) C Width over Tires m (7 ft. in.) D Height to Top of ROPS/Cab m (9 ft. in.) E Length from Axle to Axle Non-Powered Front Axle m (6 ft. in.) Mechanical-Front-Wheel-Drive Axle m (7 ft. 0 in.) G D N M L K P R S T F O Q A U V B E H C I J Backhoe Dimensions / Performance 0J Backhoe specifications are with 60-mm x 0. m ( in. x 7.5 cu. ft.) bucket Bucket Range mm ( 0 in.) Digging Force Bucket Cylinder kn (,0 lb.) Crowd Cylinder kn (,7 lb.) Swing Arc deg. Operator Control two levers With Standard With Optional Extendable Dipperstick Backhoe Retracted Extended F Loading Height (truck loading position) m ( ft. 6 in.).6 m ( ft. in.).7 m (5 ft. 6 in.) G Reach from Center of Swing Pivot m (9 ft. in.) 6.07 m (9 ft. in.) 7. m ( ft. in.) H Reach from Center of Rear Axle m ( ft. in.) 7.9 m ( ft. 7 in.). m (7 ft. in.) I Digging Depth (SAE maximum) m (5 ft. 0 in.).90 m (6 ft. in.) 6.0 m (0 ft. 0 in.) J Digging Depth (SAE) 60-mm ( ft.) Flat Bottom m (5 ft. in.).5 m (5 ft. in.) 6.07 m (9 ft. in.) 0-mm ( ft.) Flat Bottom m ( ft. 7 in.).55 m ( ft. in.) 5. m (9 ft. in.) K Stabilizer Width (transport) m (7 ft. 7 in.).0 m (7 ft. 7 in.).0 m (7 ft. 7 in.) L Stabilizer Spread (operating) m ( ft. in.).5 m ( ft. in.).5 m ( ft. in.) M Stabilizer Overall Width (operating) m ( ft. in.).0 m ( ft. in.).0 m ( ft. in.) N Bucket Rotation deg. 90 deg. 90 deg. O Transport Height m ( ft. in.).9 m ( ft. 0 in.).9 m ( ft. 0 in.)

30 Loader Dimensions / Performance (See page 9 for line art) 0J P Bucket Dump Angle (maximum) deg. Q Rollback Angle at Ground Level deg. Heavy-duty long lip Heavy-duty Heavy-duty Multipurpose Bucket Capacity m (.5 cu. yd.).00 m (. cu. yd.).5 m (.50 cu. yd.).00 m (. cu. yd.) Width mm (6 in.) 7 mm (9 in.) mm (9 in.) 7 mm (9 in.) Weight kg (9 lb.) 5 kg (, lb.) 5 kg (,0 lb.) 7 kg (,00 lb.) Breakout Force kn (0,0 lb.) 5. kn (0,00 lb.) 5. kn (0,70 lb.).9 kn (9,650 lb.) Lift Capacity (full height) kg (7,0 lb.) 69 kg (7,00 lb.) 0 kg (7,070 lb.) 996 kg (6,600 lb.) R Height to Bucket Hinge Pin (maximum) m ( ft. 0 in.).5 m ( ft. 0 in.).5 m ( ft. 0 in.).5 m ( ft. 0 in.) S Dump Clearance (bucket at 5 deg.) m ( ft. in.).69 m ( ft. 0 in.).67 m ( ft. 9 in.).6 m ( ft. 7 in.) T Reach at Full Height (bucket at 5 deg.) mm (5.5 in.) 76 mm (0.0 in.) 77 mm (.0 in.) mm (. in.) U Digging Depth Below Ground (bucket level) mm (. in.) 70 mm (6.7 in.) 57 mm (6. in.) mm (7. in.) V Length From Front Axle Centerline to Bucket Cutting Edge m (7 ft. in.).0 m (6 ft. in.).0 m (6 ft. in.).5 m (7 ft. in.) Lift Capacity with Quick-Coupler / Forks Hydraulic Capacity mm ( in.) tines A' Maximum Height kg (,570 lb.) B' Maximum Reach kg (6,97 lb.) C' At Ground Line kg (9, lb.) D' Below Ground Line mm (. in.) 5-mm (60 in.) tines 9 kg (,70 lb.) 00 kg (6,6 lb.) kg (,56 lb.) mm (. in.) A' B' C' D' Lift capacities are over-end values in kg (lb.) according to SAE J. Figures listed are 7% of the maximum lift force available. Base vehicle includes counterweight. 0J Backhoe with Standard Dipperstick 0J Backhoe with.-m ( ft.) Extendable Dipperstick, Retracted 0J Backhoe with.-m ( ft.) Extendable Dipperstick, Extended SWING PIVOT 565 (5,655) 7 (5,9) 9 (5,9) 76 (6,055) DIPPER WITH AT (,5) 577 (,67) 555 (,) 57 (,66) 9 (,9) 56 (,0) (5,09) 0 (,7) 9 (,959) 70 (5,6) DIPPER WITH AT 60 (,96) 56 (,99) 0 (,95) (,9) 0 (,) 7 (,750) (,6) 0 0 SWING PIVOT 6 (,60) 9 (,06) 6 (,6) 65 (,00) 60 (,55) 6 (,967) (,59) 0 (,95) 5 (,50) 59 (,997) 50 (,56) 90 (,) 7 (,79) 0 0 SWING PIVOT 565 (,50) 0 (,59) 59 (,7) 5 (,9) 606 (,5) 7 (,) DIPPER WITH AT (,06) 9 (,06) 9 (,079) 97 (,0) 95 (,0) 99 (,07) 9 (,05) 9 (,0) 9 (,0) 906 (,997) 90 (,9) 90 (,9) 9 (,00) 0 0 FEET METERS FEET METERS FEET METERS For more detailed spec information and available options, log on to PAGES 0

31 0J with Total Machine Control TM See page 7 for Engine, Cooling, and Powertrain information. Hydraulics 0J TMC Main Pump pressure-compensated load-sensing (PCLS) axial piston Pump rpm Backhoe L/m ( gpm) Loader L/m ( gpm) System Relief Pressure Backhoe kpa (,65 psi) Loader kpa (,65 psi) Backhoe Controls TMC electrohydraulic controls standard; auxiliary functions optional Loader Controls TMC electrohydraulic controls standard; auxiliary function and TMC tool carrier optional Cylinders Type heat-treated, chrome-plated, polished rods; hardened-steel (replaceable bushings) pivot pins Bore Rod Diameter Stroke Loader Boom () mm (.5 in.) 50 mm (.97 in.) 790 mm (.0 in.) Tool-Carrier Option () mm (.5 in.) 50 mm (.97 in.) 67.9 mm (6.9 in.) Loader Bucket () mm (.5 in.) 50 mm (.97 in.) 7 mm (9.9 in.) Tool-Carrier Option () mm (.9 in.) 56 mm (.0 in.) 79. mm (.7 in.) Backhoe Boom () mm (.9 in.) 6 mm (. in.) 97 mm (5. in.) Backhoe Crowd () mm (.5 in.) 6 mm (. in.) 69. mm (7.9 in.) Backhoe Bucket () mm (.9 in.) 6 mm (. in.) 0 mm (.9 in.) Backhoe Swing () mm (.5 in.) 50 mm (.97 in.) 7 mm (0.9 in.) Backhoe Extendable Dipperstick () mm (.76 in.) 0 mm (.57 in.) mm (7.7 in.) Backhoe Stabilizer, Standard () mm (.9 in.) 50 mm (.97 in.) 500 mm (9.69 in.) Non-Powered Axle () mm (.76 in.) mm (.65 in.) mm (.9 in.) Mechanical-Front-Wheel Drive () mm (.6 in.) mm (.65 in.) 0 mm (.7 in.) Electrical Voltage volt Alternator Rating amp Lights halogen: front and rear (,500 candlepower each); turn signals and flashers front and rear; stop and tailights and rear reflectors Operator Station Type (SAE J00) canopy, isolation mounted, ROPS/FOPS, left/right access, with molded roof Tires/Wheels Front Rear Non-Powered Front Axle L-6 SL F- () 9.5L- R- (0).5/75-6. SL F- (0) L- R- (0) Mechanical-Front-Wheel Drive /0- I- (0) 9.5L- R- (0) 0/0R XMCL 500/70R XMCL.5/0- I- (0) L- R- (0) Serviceability Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element, Vertically Mounted micron filtration /,000 service hours Refill Capacities Cooling System L (6 qt.) Rear Axle L (9 qt.) Engine Oil (including vertical spin-on filter).... L ( qt.) Torque Converter and Transmission L (6 qt.) Fuel Tank (with ground-level fueling) L ( gal.) Hydraulic System L (5 gal.) Hydraulic Reservoir L (0. gal.) Mechanical-Front-Wheel-Drive Housing Axle L (7 qt.) Planetary (each) L ( qt.)

32 Operating Weights 0J TMC With Full Fuel Tank, 79-kg (75 lb.) Operator, and Standard Equipment (Cab, Extendable Dipperstick, and 567-kg [,50 lb.] Counterweight) kg (9,0 lb.) Optional Components Tool Carrier (includes mechanical-frontwheel drive) kg (,06 lb.) Backhoe Bucket Coupler kg ( lb.) Overall Dimensions A Ground Clearance (minimum) mm ( in.) B Overall Length (transport) m ( ft. in.) C Width over Tires m (7 ft. in.) D Height to Top of ROPS/Cab m (9 ft. in.) E Length from Axle to Axle Non-Powered Front Axle m (6 ft. in.) Mechanical-Front-Wheel-Drive Axle m (7 ft. 0 in.) G D N M L K P R S T F O Q A U V B E H C I J Backhoe Dimensions / Performance 0J TMC Backhoe specifications are with 60-mm x 0.-m ( in. x 7.5 cu. ft.) bucket Bucket Range mm ( 0 in.) Digging Force Bucket Cylinder kn (,0 lb.) Crowd Cylinder kn (,7 lb.) Swing Arc deg. Operator Control two joysticks With Extendable Dipperstick Retracted Extended F Loading Height (truck loading position) m ( ft. in.).7 m (5 ft. 6 in.) G Reach from Center of Swing Pivot m (9 ft. in.) 7. m ( ft. in.) H Reach from Center of Rear Axle m ( ft. 7 in.). m (7 ft. in.) I Digging Depth (SAE maximum) m (6 ft. in.) 6.0 m (0 ft. 0 in.) J Digging Depth (SAE) 60-mm ( ft.) Flat Bottom m (5 ft. in.) 6.07 m (9 ft. in.) 0-mm ( ft.) Flat Bottom m ( ft. in.) 5. m (9 ft. in.) K Stabilizer Width (transport) m (7 ft. 7 in.).0 m (7 ft. 7 in.) L Stabilizer Spread (operating) m ( ft. in.).5 m ( ft. in.) M Stabilizer Overall Width (operating) m ( ft. in.).0 m ( ft. in.) N Bucket Rotation deg. 90 deg. O Transport Height m ( ft. 0 in.).9 m ( ft. 0 in.) PAGES

33 Loader Dimensions / Performance 0J TMC P Bucket Dump Angle (maximum) deg. Q Rollback Angle at Ground Level deg. Heavy-duty long lip Heavy-duty Heavy-duty Multipurpose Bucket Capacity m (.5 cu. yd.).00 m (. cu. yd.).5 m (.50 cu. yd.).00 m (. cu. yd.) Width mm (6 in.) 7 mm (9 in.) mm (9 in.) 7 mm (9 in.) Standard Loader Option Weight kg (9 lb.) 5 kg (, lb.) 5 kg (,0 lb.) 7 kg (,00 lb.) Breakout Force kn (0,0 lb.) 5. kn (0,00 lb.) 5. kn (0,70 lb.).9 kn (9,650 lb.) Lift Capacity (full height) kg (7,0 lb.) 69 kg (7,00 lb.) 0 kg (7,070 lb.) 996 kg (6,600 lb.) R Height to Bucket Hinge Pin (maximum) m ( ft. 0 in.).5 m ( ft. 0 in.).5 m ( ft. 0 in.).5 m ( ft. 0 in.) S Dump Clearance (bucket at 5 deg.) m ( ft. in.).69 m ( ft. 0 in.).67 m ( ft. 9 in.).6 m ( ft. 7 in.) T Reach at Full Height (bucket at 5 deg.) mm (5.5 in.) 76 mm (0.0 in.) 77 mm (.0 in.) mm (. in.) U Digging Depth Below Ground (bucket level) mm (. in.) 70 mm (6.7 in.) 57 mm (6. in.) mm (7. in.) V Length From Front Axle Centerline to Bucket Cutting Edge m (7 ft. in.).0 m (6 ft. in.).0 m (6 ft. in.).5 m (7 ft. in.) Tool-Carrier Loader Option Weight kg (60 lb.) 9 kg (,05 lb.) 50 kg (,5 lb.) 79 kg (,77 lb.) Breakout Force kn (0,00 lb.) 50.9 kn (,50 lb.) 7. kn (0,60 lb.). kn (9,60 lb.) Lift Capacity (full height) kg (6,65 lb.) 76 kg (7,5 lb.) 09 kg (6,5 lb.) 656 kg (5,50 lb.) R Height to Bucket Hinge Pin (maximum) m ( ft. in.).0 m ( ft. in.).5 m ( ft. 0 in.).0 m ( ft. in.) S Dump Clearance (bucket at 5 deg.) m ( ft. in.).59 m ( ft. 6 in.).57 m ( ft. 5 in.).50 m ( ft. in.) T Reach at Full Height (bucket at 5 deg.) mm (. in.) 76 mm (0.0 in.) 77 mm (.0 in.) 6 mm (.9 in.) U Digging Depth Below Ground (bucket level).... mm (. in.) 0 mm (5.5 in.) 0 mm (5.5 in.) 5 mm (6.0 in.) V Length From Front Axle Centerline to Bucket Cutting Edge m (7 ft. 7 in.).5 m (7 ft. in.).5 m (7 ft. in.).7 m (7 ft. 5 in.) Lift Capacity with Quick-Coupler / Forks Hydraulic Capacity mm ( in.) tines 5-mm (60 in.) tines A' Maximum Height kg (,75 lb.) 05 kg (,56 lb.) B' Maximum Reach kg (7,50 lb.) 9 kg (7,6 lb.) C' At Ground Line kg (9,700 lb.) 0 kg (9,5 lb.) D' Below Ground Line mm (. in.) mm (. in.) A' B' C' D' Lift capacities are over-end values in kg (lb.) according to SAE J. Figures listed are 7% of the maximum lift force available. Base vehicle includes counterweight. 0J TMC Backhoe with.-m ( ft.) Extendable Dipperstick, Retracted 0J TMC Backhoe with.-m ( ft.) Extendable Dipperstick, Extended SWING PIVOT (5,09) 0 (,7) 9 (,959) 70 (5,6) 7 (,79) DIPPER WITH AT (,56) (,96) 56 (,99) 0 (,95) (,9) 0 (,) 7 (,750) 6 (,60) 6 (,6) 60 (,55) (,59) 5 (,50) 0 0 SWING PIVOT 565 (,50) 0 (,59) 59 (,7) 5 (,9) 606 (,5) 7 (,) DIPPER WITH AT (,06) 9 (,06) 9 (,079) 97 (,0) 95 (,0) 99 (,07) 9 (,05) 9 (,0) 9 (,0) 906 (,997) 90 (,9) 90 (,9) 9 (,00) 0 0 FEET METERS FEET METERS

34 70J Engine 70J For use both in and outside U.S., Canada, and Europe Manufacturer and Model John Deere PowerTech TM E 606HT067 turbocharged, standard Non-Road Emissions Standard EPA Tier /EU Stage IIIA Displacement L ( cu. in.) Net Peak Power (ISO99) kw (6 rpm Net Peak Torque (ISO99) Nm (0 rpm Net Torque Rise % Lubrication pressure system with spin-on filter and cooler Air Cleaner dual-stage dry type with safety element and evacuator valve Cooling Fan Type suction Engine Coolant Rating deg. C ( deg. F) Engine Oil Cooler oil to water Powertrain Transmission speed, helical-cut gears, full PowerShift TM with hydraulic reverser standard; electric clutch cutoff on loader lever Torque Converter single stage, dual phase with.95: stall ratio; 0 mm ( in.) Maximum Travel Speeds with Standard Engine and L- Rear Tires Forward Reverse With Front Tires and Mechanical-Front-Wheel Drive Gear km/h (. mph) 6.9 km/h (. mph) Gear km/h (6. mph). km/h (7. mph) Gear km/h (5.5 mph) 7.5 km/h (7. mph) Gear km/h (. mph) N/A With.5/75-6. Front Tires Gear km/h (. mph) 6.9 km/h (. mph) Gear km/h (6. mph).6 km/h (7. mph) Gear km/h (5.5 mph) 7.7 km/h (7. mph) Gear km/h (. mph) N/A Axles Axle Oscillations, Stop to Stop (both axles).... deg. Axle Ratings Mechanical- Standard front-wheel drive Rear Static kg 500 kg kg (50,596 lb.) (0,76 lb.) (, lb.) Dynamic kg 7700 kg 900 kg (0, lb.) (6,976 lb.) (,605 lb.) Ultimate kg 600 kg 6 00 kg (90,90 lb.) (96, lb.) (0,95 lb.) Differentials hydraulic locking rear, electric, foot-actuated; limited slip front Steering (ISO500) hydrostatic power and emergency steering Axle Mechanicalfront-wheel drive Non-powered front Curb-Turning Radius With Brakes m ( ft. in.).07 m ( ft. in.) Without Brakes m (5 ft. in.).65 m (5 ft. in.) Bucket Clearance Circle With Brakes m (6 ft. in.). m (7 ft. in.) Without Brakes m (9 ft. 7 in.). m (0 ft. 5 in.) Steering Wheel Turns (lock to lock, flow amplified) to.. to.5 Final Drive Mechanical-Front Wheel heavy-duty, inboard planetary final drives distribute shock loads over gears Rear Axle heavy-duty, inboard planetary final drives distribute shock loads over gears PAGES 5