FOR HARRINGTON CUMALONG LEVER PULLER. 3/4, 1, 1 1/2, 2, 3, 6 and 9 Ton Capacity Model L4 BEFORE USING THIS PRODUCT:

Transcription

1 I EFFECTIVE: November, 2002 J, OWNER'S (OPERATOR'S) MANUAL AND SAFETY INSTRUCTIONS FOR HARRINGTON CUMALONG LEVER PULLER 3/4,, /2, 2, 3, 6 and 9 Ton Capacity Model L4 Jt. A BEFORE USING THIS PRODUCT: ALWAYS SAVE THIS BOOK FOR FUTURE REFERENCE ALWAYS READ OWNER'S (OPERATOR'S) MANUAL AND SAFETY INSTRUCTIONS WARNING: IMPROPER lever hoist use could result in death or serious injury. To avoid these hazards: : NEVER hoist loads over or near people. : NEVER work under or near hoisted loads. : ALWAYS operate, inspect and maintain this hoist in accordance with applicable safety codes and regulations. These safety instructions contain important information to help you use the chain hoist in a safe manner. J, AIIIMGTO IS S ND S

2 6. WARRANTY.'L All products sold by Harrington Hoists, Inc. are warranted to be free from defect in material and workmanshipfrom date of shipment by Harrington forthe following periods: Manual Hoists & Trolleys -2 years Electric Hoist & Trolleys, Crane Components - year Spare/Replacement Parts - year Theproduct must be used in accordance with manufacturer's recommendations and must not have beensubject to abuse, lack of maintenance, misuse, negligence, or unauthorized repairs or alterations. Shouldany defect in material or workmanship occur during the above time period in any product, as determineby Harrington Hoist's inspection ofthe product, Harrington Hoists, Inc. agrees, at its discretion,either to replace (not including installation) or repairthe part of product free of charge and deliversaid item F.O.B. Harrington Hoists, Inc. place of business to customer. Customer must obtaina Return Goods Authorization as directed by Harrington or Harrington's published repair centerprior to shipping product for warranty evaluation. An explanation of the complaint must accompanythe product. Product must be returned freight prepaid. Upon repair, the product will be coveredfor the remainder of the original warranty period. If it is determined there is no defect, or thatthe defect resulted from causes not within the scope of Harrington's warranty, the customer will beresponsibleforthe costs of returning the product. HarringtonHoists, Inc. disclaims any and all other warranties of any kind expressed or implied as to theproduct'smerchantability or fitness for a particular application. Harrington will not be liable for death,injuriesto persons or property or for incidental, contingent, special or consequential damages,loss or expense arising in connection with the use or inability whatever, regardless of whether damage,loss or expense results from any act or failure to act by Harrington, whether negligent or wilful,or from any other reason. 7. PARTS LIST Whenordering Parts, please provide the Hoist model number and serial number located on the Hoist nameplate(seefig. below).. CD+rG. 4) HARRINGTON LB05~ TON CAPACITY Mod"'0- SelialHo- H"'~"""'ioI._I"'-. M'='i,f~&45 -. LB Nameplate 29

3 II I ~ ~ ADDITIONAL PARTS FOR 6 TON CAPACITY ADDITIONAL PARTS FOR 9 TON CAPACITY.. ~

4 Fig. No. Part Name Parts per Hoist Capacity 3/4T T /2T 2T 3T 6T 9T Top Hook Complete Set Top Hook Assembly L L40000 L40005 L L L L Hook Assembly L Latch Assembly L L40705 L L L Shaft L Shaft Stopper Pin 2 L Top Yoke A, B Set L Idle Sheave L Socket Bolt Lever Nut 3 L Bottom Hook Complete Bottom Hook Assembly L L40200 L40205 L L L L Hook Assembly L L Latch Assembly L L40705 L L L Shaft L Shaft Stopper Pin 2 L Bottom Yoke Set L L Idle Sheave L S ocket Bolt 3(2) L ever Nut 3(2) L L Name Plate C L Chain Pin L M30405 M M Chain Stopper Link L L L Slotted Nut for Fig. No. 9 M M M Split Pin for Fig. No Split Pin for Fig. No Side Plate A Assembly L L45005 L Side Plate B Assembly L L L Gear Case L L L Gear # 2 2 L L45205 L Pinion L4008 L405 L Load Gear L44008 L4405 L Load Sheave L46008 L4605 L Washe r L47008 L4705 L Friction Plate 2 L45008 L Ratchet Disc L L Friction Disc L L Bushing L L Pawl 2 L L45505 L Pawl Spring 2 L L45805 Figures in parenthesis show the number for 9 ton capacity. 3

5

6 LEVER ASSEMBLY FOR LOAD SIGNAL TYPE Fig. No. Part Name Parts per Hoist Capacity 3/4T T /2T 2T 3T 6T 9T Lever Complete Set Y2SE Y2SU00-62 Y2SE05-62 Y2SU Y2SE Grip L423S008 3 Name Plate with Rivets L L L L L L L Name Plate B L480S008 33

7 Harrington Hoists, Inc. 40 West End Ave. Manheim, PA 7545 Phone: Toll Free: Fax: Harrington Hoists-Western Division 234 Pomona Rincon Rd. #03 Corona, CA Phone: Toll Free: Fax: L4LBPL