CONSTRUCTION EQUIPMENT

Transcription

1 CONSTRUCTION EQUIPMENT U.S. PRICE LIST EXCAVATORS PL-200 CX SAP REVISION 17 EFFECTIVE FEBRUARY 9, 2015 THIS IS AN ELECTRONIC COPY ONLY HARD COPIES WILL NOT BE DISTRIBUTED. This price list is intended for dealers with the Excavators (CX) contract only. The prices included in this revision supersede any prices established prior to the effective date shown unless specifically identified in a price bulletin as superseding this price list. Below is a list of Family(s) and Model(s) that are included in this price list. Crawler Excavator (Midi) CX75C Tier 4 Final CX80C Tier 4 Final Crawler Excavator (Conventional) CX130D Tier 4 Final CX145C MSR Tier 4 Interim CX160D Tier 4 Final CX210D Tier 4 Final CX235C MSR Tier 4 Interim CX250D Tier 4 Final CX300D Tier 4 Final CX350D Tier 4 Final CX470C Tier 4 Interim CX700B CX800B PLEASE NOTE: Retain the price book pages of the discontinued series for your records. Copyright 2015 By CNH Industrial America LLC Page 1 of 178

2 Page 2 of 178

3 General Information Prices shown herein are suggested prices only and in no way are they to be construed as limiting or restricting the dealer in his determination of the ultimate retail selling price. It is understood that the dealers are free to determine their selling price. Subject to any Federal, State or local laws. Where shown herein liquid capacities are U.S. measure unless otherwise noted. ADVANCE FREIGHT Advance freight will be added to the machinery invoice as a separate net charge for machinery shipped from field locations or from other than specified Ex Works locations. PRICES Prices are Ex Works factory, where the goods are manufactured, except where noted. For detailed information concerning prices, please refer to your OPERATING GUIDE. Prices and specifications are subject to change without notice. CONTENTS OF ORGANIZATION Case Construction Equipment Inc issues price lists and revisions covering each Case contract. U.S. Price List is published in U.S. funds. Canadian Price List is published in Canadian funds. Assure that you are using the correct price list. The Canadian price lists are denoted by a Maple Leaf on the price list cover page and the symbol (CDN) is printed at the head of the Factory Supplied Attachments List columns. Freight, duty and sales taxes are NOT included in any wholegoods or attachment prices shown in the price list. Any appropriate freight, duty, Federal, State, and Provincial taxes will be added to the machinery invoice as separate net charges. PROCEDURE The price pages for each machine (or group of machines) lists both Factory and Factory Supplied Attachments. Each price list is comprised of the various machines sold under that contract. Each price book section has Factory, Factory Supplied Attachments, or Third Party Supplied Attachments pages. When ordering and pricing a machine follow the ordering instructions listed for that machine. Attachments listed following the Factory Supplied Attachments or Third Party Supplied Attachments heading are available for installation in the field. ATTACHMENTS Expect Attachments to be shipped within 2-3 weeks from order entry. Page 3 of 178

4 General Information DISTRIBUTION OF PRICE LISTS / REQUESTS FOR ADDITIONAL COPIES Price lists will be provided electronically via that Dealer Portal. Contact information for additional copies of Case Construction Equipment Price Lists Additional price lists, divider tabs and binders may be ordered at the Document Management Center. From Dealer Portal click on Tools then Document Management Center link. Any questions you can call the Document Management Center at You will only receive price lists for contracts covered by your current Dealer Agreement with the Company. The revisions are dated and are effective as of that date. However, PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. Page 4 of 178

5 EXCAVATORS TABLE OF CONTENTS CX SERIES EXCAVATORS CX75C MINIMUM SWING RADIUS CRAWLER EXCAVATOR Standard Features..... EX- 07 Price List.. EX- 09 Factory Supplied Accessories..... EX- 15 CX80C CRAWLER EXCAVATOR Standard Features..... EX- 17 Price List.. EX- 19 Factory Supplied Accessories..... EX- 23 CX130C STANDARD EXCAVATOR Standard Features..... EX- 25 Price List.. EX- 29 Factory Supplied Accessories..... EX- 35 CX145C MINIMUM SWING RADIUS CRAWLER EXCAVATOR Standard Features..... EX- 37 Price List.. EX- 39 Factory Supplied Accessories..... EX- 47 CX160C CRAWLER EXCAVATOR Standard Features..... EX- 49 Price List.. EX- 51 Factory Supplied Accessories..... EX- 61 CX210C CRAWLER EXCAVATOR Standard Features..... EX- 63 Price List.. EX- 65 Factory Supplied Accessories..... EX- 73 CX210C LR CRAWLER EXCAVATOR Standard Features..... EX- 75 Price List.. EX- 77 Factory Supplied Accessories..... EX- 83 CX235C MINIMUM SWING RADIUS CRAWLER EXCAVATOR Standard Features..... EX- 85 Price List.. EX- 87 Factory Supplied Accessories..... EX- 93 CX250D STD CRAWLER EXCAVATOR Standard Features..... EX- 95 Price List.. EX- 97 Factory Supplied Accessories..... EX- 105 CX250C LR CRAWLER EXCAVATOR Standard Features..... EX- 107 Price List.. EX- 109 Factory Supplied Accessories..... EX- 115 CX300D CRAWLER EXCAVATOR Standard Features..... EX- 117 Price List.. EX- 119 Factory Supplied Accessories..... EX- 127 Page 5 of 178

6 EXCAVATORS TABLE OF CONTENTS CX350D CRAWLER EXCAVATOR Standard Features..... EX- 129 Price List.. EX- 131 Factory Supplied Accessories..... EX- 139 CX470C CRAWLER EXCAVATOR Standard Features..... EX- 141 Price List.. EX- 143 Factory Supplied Accessories..... EX- 149 CX470C MASS CRAWLER EXCAVATOR Standard Features..... EX- 151 Price List.. EX- 153 CX700B CRAWLER EXCAVATOR Standard Features..... EX- 159 Price List.. EX- 161 Factory Supplied Accessories..... EX- 167 CX800B CRAWLER EXCAVATOR Standard Features..... EX- 169 Price List.. EX- 171 Factory Supplied Accessories..... EX- 177 Page 6 of 178

7 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR Standard Equipment ENGINE: ELECTRICAL: Isuzu AP-4LE2X turbocharged 24 Volt system Tier 4 Final Certified Alternator: 50 AMP 4 Cylinder liquid cooled diesel Batteries: 2 High Pressure Common Rail Cooled EGR with variable controlled BLADE: valve CX75C W/DOZER BLADE ONLY DOC - diesel oxidation catalyst Hydraulically controlled dozer blade 133 cu. in. (2.2 liter) displacement - Blade width: 7'7" Horsepower: - Blade height: 1'6" - Net (SAE) 55.2 (41.2kw) at 2000 RPM UPPER STRUCTURE: Fuel Tank Capacity: 31.7 gal. (US) Swing brake Long Life Anti-freeze (protect to - Casted counterweight 34ºF) Upper undercovers 500 hour greasing interval - turntable OPERATOR'S CAB: bearing 4-point iso-mounted ROPS cab Pressurized cab UNDERCARRIAGE: - Climate control: AC/Heat/Defrost X-pattern car-body - Fully adjustable deluxe seat with LC/long undercarriage: 9 4 (2.85M) 3 seat-belt Track gauge: 6 6 (1.99M) - AM/FM radio with dual speakers Shoes: 3-bar/18 (39 per side) - Floor mats Hydraulic adjustable track tension - 12-volt outlet Tapered upper track frame - In-cab light Sealed outer flange rollers Cab roof skylight Front track guides Safety glass: Lower under covers - Two-piece front window - Front windshield wiper with washer TRACK DRIVE: Waterproof/illuminated membrane 2-speed independent hydrostatic travel switches (max. 3.2 mph) Low-effort pilot controls SAHR disc brakes Full-color LCD display - rearview Drive motor guards camera ready Dial type throttle control for engine speed Work mode selector: SP, H, Auto One-touch idle External rearview mirrors Programmable anti-theft protection Page 7 of 178 -PX6A 01 C JAN-15

8 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR Standard Equipment HYDRAULICS: OPTIONAL EQUIPMENT: Control pattern change selector Attachments: Open-center system - Offset boom: 12 9 Two - variable displacement axial - Arm: 7' 2" piston pumps with regulating system - Arm: 5' 9 (for offset boom) One - pilot control gear pump - Arm: 6' 10" (for offset boom) Auxiliary hydraulic valve FOPS cab top guard (Level 2) Boom anti-drift valve Front grill guard (2 x 2 mesh) 5000 hour hydraulic oil change interval Front rock guard (OPG 2) 1000 hour hydraulic filter change Rear View Camera interval Hose Burst Check Valve (HBCV) Refuel Pump ATTACHMENTS: Auxiliary hydraulics Arm: 5'6" (less bucket) Steel shoes: 3-bar/24 Boom: 12'4" one piece Rubber shoes: Hammer operation adaptable Rubber track pads bolted on Reinforcing required for steel crusher/cutter operation Swing brake Order from Factory Supplied Attachments: MISCELLANEOUS: Please consult excavator Parts catalogue attachments weight limits prior to Single key lock-up selecting a coupler and large bucket. Travel alarm and horn Excessive bucket and coupler weight Centralized lube bank will negatively impact machine Rubber bumpers for upper sides performance. (order through Service Parts) Working lights: 1x boom, 1 x cab Page 8 of 178 -PX6A 01 C JAN-15

9 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR Models COMMERCIAL MODEL Weight Factory Data List Price CX75C W/DOZER BLADE 16,133 LB $133, Page 9 of 178 -PX6A 01 C JAN-15

10 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR Factory Supplied Options Order Code Description Weight Factory Data List Price BOOMS SD_E5311 BOOM Standard Boom 12'4" (3.75 M) Standard Boom Offset Boom 12'9" (3.89 M) Offset Boom For use with CX75C w/dozer blade No Charge $8, ARMS SD_E5320 ARM/DIPPERSTICK For use with Standard Boom '6" (1.7 M) Arm No Charge '2" (2.2 M) Arm $2, For use with Offset Boom '9" (1.75 M) Standard Arm $1, For use with CX75C w/dozer Blade ' 10" (2.11 M) Standard Arm For use with CX75C w/dozer Blade $1, TRACK SHOES SD_E5199 TRACK SHOES " (450mm) Steel Shoes, 3-bar No Charge "(600mm) Steel Shoes 3-bar $1, Blade will not fully cover track width when using 24" shoes " (450mm) Rubber Track Rubber pads bolted on regular 18" track $6, LANGUAGE SD_47083 OPERATOR'S MANUAL English Literature No Charge French Canadian Literature No Charge Spanish Literature No Charge Page 10 of 178 -PX6A 01 C JAN-15

11 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR ADDITIONAL EQUIPMENT CXM ADDITIONAL OPTIONS SD_E5443 CAB GUARD (FOPS) XE5443X FOPS Top Cab Guard/Level 1 No Charge FOPS Top Cab Guard/Level 2 $1, SD_E5444 CAB GUARD (FRONT) XE5444X No Front Guard No Charge Front grill guard - 2 x 2 mesh $1, Front rock guard (OPG 2) $2, vertical bars (one piece/full length) SD_E6410 AUXILIARY HYDRAULICS XE6410X No Optional Hydraulics No Charge For use with Standard Boom Single Acting Auxiliary Hyd $4, Single Acting Auxiliary Hydraulics For use with hammers or vibratory compaction plate applications Joystick activated with Electronic Proportional Controls Provides single direction flow Includes manually adjustable relief valve to set required pressures Notes: 1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Page 11 of 178 -PX6A 01 C JAN-15

12 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR Double Acting Auxiliary Hyd Double Acting Auxiliary Hydraulics For use with thumb applications $3, Joystick Activated with Electronic Proportional Controls Provides single pump, two-way flow Hydraulic plumbing provided to the end of the boom only, no piping to the arm This system is not switchable to single acting flow Notes: 1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Multi-Function Auxiliary Hyd Multi-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushers $7, Does not include the in-cab Electronic Pressure Control feature Joystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flow Secondary Low-flow Auxiliary Hydraulics can be added Includes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applications Notes: 1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C Series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Page 12 of 178 -PX6A 01 C JAN-15

13 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR For use with Offset Boom Offset Boom Single Aux Hyd Offset Boom Single Acting Auxiliary Hydraulics For use with Offset Boom option only For use with hammer applications $5, Joystick Activated with Electronic Proportional Controls Provides single direction flow Includes manually adjustable relief valve to set required pressures Notes: 1) Not for use other Auxiliary Hydraulics options, with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Offset Boom Double Aux Hyd Offset Boom Double Acting Auxiliary Hydraulics For use with Offset Boom option only For use with thumb applications $4, Joystick Activated with Electronic Proportional Controls Provides single pump, two-way flow Hydraulic plumbing provided to the end of the boom only, no piping to the arm This system is not switchable to single acting flow Notes: 1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or SD_E6417 SECONDARY AUXILIARY HYDRAULICS XE6417X No Extra Auxiliary Hydraulics No Charge Page 13 of 178 -PX6A 01 C JAN-15

14 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR Secondary Low Flow Aux Hyd Secondary Low Flow Auxiliary Hydraulics Provides low-flow for rotation or tilt hydraulic attachments. $4, For use with Standard Boom option Not for use with Offset Boom option Joystick Activated with Electronic Proportional Controls Notes: 1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option. 2) For dealer installed auxiliary hydraulic kits contact: HKX ( or SD_E9702 REAR VIEW CAMERA XE9702X No Rear View Camera No Charge Rear View Camera $ SD_E9730 SAFETY VALVE XE9730X No Hose Burst Check Valve No Charge Hose Burst Check Valve (HBCV) $2, SD_E9874 REFUEL PUMP XE9874X No Refuel Pump No Charge Refuel Pump $1, Page 14 of 178 -PX6A 01 C JAN-15

15 -PX6A 01 CX75C MIN SWING RADIUS CRAWLER EXCAVATOR Factory Supplied Attachments Order Code Description Weight Factory Data List Price Case Coupler Buckets " Heavy Duty Coupler Bucket with 3 teeth (.24 cu. yd.) " Heavy Duty Coupler Bucket with 4 teeth (.32 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.41 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.50 cu. yd.) " Heavy Duty Coupler Bucket with 6 teeth (.59 cu. yd.) Case Multi Fit Coupler Hydraulic Powerlatch Coupler Full Kit and Pins Optimized for use with Case coupler buckets. Also can be used with a wide range of buckets from other manufacturers including pin-on types. Includes hydraulic installation kit and instructions. 440 LB $2, LB $2, LB $2, LB $2, LB $3, LB $7, Case Pin On Buckets " Ditching Bucket (.60 cu. yd.) 535 LB $2, " Ditching Bucket (.70 cu. yd.) 550 LB $2, " Heavy Duty Bucket 450 LB $1, with 3 teeth (.21 cu. yd.) " Heavy Duty Bucket 530 LB $1, with 4 teeth (.31 cu. yd.) " Heavy Duty Bucket 600 LB $2, with 5 teeth (.39 cu. yd.) " Heavy Duty Bucket 685 LB $2, with 5 teeth (.48 cu. yd.) " Heavy Duty Bucket with 6 teeth (.57 cu. yd.) 790 LB $2, Page 15 of 178 -PX6A 01 C JAN-15

16 (This page intentionally left blank) Page 16 of 178

17 -PX6B 01 CX80C CRAWLER EXCAVATOR Standard Equipment ENGINE: ELECTRICAL: Isuzu AU-4LE2X turbocharged 24 Volt system Tier 4 Final Certified Alternator: 50 AMP 4 Cylinder liquid cooled diesel Batteries: 2 High pressure common rail Cooled EGR with variable BLADE: controlled valve Hydraulically controlled dozer blade DOC - diesel oxidation catalyst - Blade width: 7'7" 133 cu. in. (2.2 liter) displacement - Blade height: 1'6" Horsepower: - Net (SAE) 55.2 (41.2kw) at UPPER STRUCTURE: 2000 RPM Swing brake Fuel Tank Capacity: 31.7 gal. (US) Casted counterweight Long Life Anti-freeze Upper undercovers (protect to - 34ºF) 500 hour greasing interval - turntable bearing OPERATOR'S CAB: 4-point iso-mounted ROPS cab UNDERCARRIAGE: Pressurized cab X-pattern car-body - Climate control: AC/Heat/Defrost LC/long undercarriage: 9 4 (2.85M) - Fully adjustable deluxe seat with Track gauge: 6 2 (1.99M) 3 seat-belt Shoes: 3-bar/18 (39 per side) - AM/FM radio with dual speakers Hydraulic adjustable track tension - Floor mats Tapered upper track frame - 12-volt outlet Sealed outer flange rollers - In-cab light Front track guides Cab roof skylight Lower under covers Safety glass: - Two-piece front window TRACK DRIVE: - Front windshield wiper with washer 2 speed independent hydrostatic travel Waterproof/illuminated membrane (max. 3.2 mph) switches SAHR disc brakes Low-effort pilot controls Drive motor guards Full-color LCD display - rearview camera ready Dial type throttle control for engine speed Work mode selector: SP, H, Auto One-touch idle External rearview mirrors Programmable anti-theft protection Page 17 of 178 -PX6B 01 C APR-15

18 -PX6B 01 CX80C CRAWLER EXCAVATOR Standard Equipment HYDRAULICS: OPTIONAL EQUIPMENT: Control pattern change selector Attachments: Open-center system - Arm: 7'2" Two - variable displacement axial FOPS cab top guard (Level 2) piston pumps with regulating Front grill guard (2 x 2 mesh) system Front rock guard (OPG 2) One - pilot control gear pump Rear View Camera One position mode selector Hose Burst Check Valve (HBCV) Auxiliary hydraulic valve Refuel Pump Boom anti-drift valve Auxiliary hydraulics 5000 hour hydraulic oil change interval Steel shoes: 3-bar/ hour hydraulic filter change Rubber shoes: interval - 18 Rubber track pads bolted on steel ATTACHMENTS: Arm: 5'6" (less bucket) Order from Factory Supplied Swing Boom: 11'6" one piece Attachments: Hammer operation adaptable - Please consult excavator Reinforcing required for attachments weight limits prior to crusher/cutter operation selecting a coupler and large bucket. Excessive bucket and coupler weight MISCELLANEOUS: will negatively impact machine Parts catalogue performance. Single key lock-up Travel alarm and horn Centralized lube bank Rubber bumpers for upper sides (order through Service Parts) Working lights: 1 x boom, 1 x cab Page 18 of 178 -PX6B 01 C APR-15

19 -PX6B 01 CX80C CRAWLER EXCAVATOR Models COMMERCIAL MODEL Weight Factory Data List Price CX80C 18,585 LB $139, Page 19 of 178 -PX6B 01 C JAN-15

20 -PX6B 01 CX80C CRAWLER EXCAVATOR Factory Supplied Options Order Code Description Weight Factory Data List Price BOOMS SD_E5311 BOOM Standard Boom No Charge ARMS SD_E5320 ARM/DIPPERSTICK '6" (1.7 M) Arm No Charge '2" (2.2 M) Arm $2, TRACK SHOES SD_E5199 TRACK SHOES " (450mm) Steel Shoes, 3-bar No Charge "(600mm) Steel Shoes 3-bar $1, " (450mm) Rubber Track $6, Rubber pads bolted on regular 18" track LANGUAGE SD_47083 OPERATOR'S MANUAL English Literature No Charge French Canadian Literature No Charge Spanish Literature No Charge ADDITIONAL EQUIPMENT CXM ADDITIONAL OPTIONS SD_E5443 CAB GUARD (FOPS) XE5443X FOPS Top Cab Guard/Level 1 No Charge FOPS Top Cab Guard/Level 2 $1, SD_E5444 CAB GUARD (FRONT) XE5444X No Front Guard No Charge Front grill guard - 2 x 2 mesh $1, Page 20 of 178 -PX6B 01 C JAN-15

21 -PX6B 01 CX80C CRAWLER EXCAVATOR Front rock guard (OPG 2) vertical bars (one piece/full length) $2, SD_E6410 AUXILIARY HYDRAULICS XE6410X No Optional Hydraulics No Charge Single Acting Auxiliary Hyd $4, Single Acting Auxiliary Hydraulics For use with hammers or vibratory compaction plate applications Joystick activated with Electronic Proportional Controls Provides single direction flow Includes manually adjustable relief valve to set required pressures Notes: 1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Double Acting Auxiliary Hyd Double Acting Auxiliary Hydraulics For use with thumb applications $3, Joystick Activated with Electronic Proportional Controls Provides single pump, two-way flow Hydraulic plumbing provided to the end of the boom only, no piping to the arm This system is not switchable to single acting flow Notes: 1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Page 21 of 178 -PX6B 01 C JAN-15

22 -PX6B 01 CX80C CRAWLER EXCAVATOR Multi-Function Auxiliary Hyd Multi-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushers $7, Does not include the in-cab Electronic Pressure Control feature Joystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flow Secondary Low-flow Auxiliary Hydraulics can be added Includes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applications Notes: 1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C Series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or SD_E6417 SECONDARY AUXILIARY HYDRAULICS XE6417X No Extra Auxiliary Hydraulics No Charge Secondary Low Flow Aux Hyd $4, Secondary Low Flow Auxiliary Hydraulics Provides low-flow for rotation or tilt hydraulic attachments. For use with Standard Boom option Not for use with Offset Boom option Joystick Activated with Electronic Proportional Controls Notes: 1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option. 2) For dealer installed auxiliary hydraulic kits contact: HKX ( or SD_E9702 REAR VIEW CAMERA XE9702X No Rear View Camera No Charge Rear View Camera $ SD_E9730 SAFETY VALVE XE9730X No Hose Burst Check Valve No Charge Hose Burst Check Valve (HBCV) $2, SD_E9874 REFUEL PUMP XE9874X No Refuel Pump No Charge Refuel Pump $1, Page 22 of 178 -PX6B 01 C JAN-15

23 -PX6B 01 CX80C CRAWLER EXCAVATOR Factory Supplied Attachments Order Code Description Weight Factory Data List Price Case Coupler Buckets " Heavy Duty Coupler Bucket with 3 teeth (.24 cu. yd.) " Heavy Duty Coupler Bucket with 4 teeth (.32 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.41 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.50 cu. yd.) " Heavy Duty Coupler Bucket with 6 teeth (.59 cu. yd.) Case Multi Fit Coupler Hydraulic Powerlatch Coupler Full Kit and Pins Optimized for use with Case coupler buckets. Also can be used with a wide range of buckets from other manufacturers including pin-on types. Includes hydraulic installation kit and instructions. 440 LB $2, LB $2, LB $2, LB $2, LB $3, LB $7, Case Pin On Buckets " Ditching Bucket (.60 cu. yd.) 535 LB $2, " Ditching Bucket (.70 cu. yd.) 550 LB $2, " Heavy Duty Bucket 450 LB $1, with 3 teeth (.21 cu. yd.) " Heavy Duty Bucket 530 LB $1, with 4 teeth (.31 cu. yd.) " Heavy Duty Bucket 600 LB $2, with 5 teeth (.39 cu. yd.) " Heavy Duty Bucket 685 LB $2, with 5 teeth (.48 cu. yd.) " Heavy Duty Bucket with 6 teeth (.57 cu. yd.) 790 LB $2, Page 23 of 178 -PX6B 01 C JAN-15

24 (This page intentionally left blank) Page 24 of 178

25 -PX6D 02 CX130D CRAWLER EXCAVATOR Standard Equipment ENGINE: HYDRAULICS: Isuzu AR-4JJ1X Auto power boost Tier 4 Final Certified Auto swing priority Selective Catalytic Reduction (SCR) Arm speed assistance (2 pump flow) Diesel Oxidation Catalyst (DOC) Auxiliary flow control Cooled Exhaust Gas Recirculation Auxiliary valve (CEGR) Boom speed assistance (2 pump flow) EGR Coolers Bucket curl assist Four-cylinder turbo-charged diesel Control levers pre-wired for auxiliary VGT turbocharger hydraulics Electronic fuel injection Electronically controlled hydraulic High pressure common rail system pumps Neutral safety start Holding valve (Boom and Arm) Auto-engine warm up Fire wall Glow-plug pre-heat Hydraulic filter restriction indicator Fuel Economy Assist System (FEA) Neutral pump de-stroke Engine Protection Feature (EPF) Oil cooler Dual-stage fuel filtration Power save Dual element air filter Pump stand-by pressure Remote oil filter Auto travel speed change Drain for fuel tank Selectable work modes Remote engine oil drain Free swing 500-hour engine oil change interval Hydraulic oil sample port 24-volt system Control pattern selector Engine oil sample port Pre-set auxiliary pump settings Battery disconnect switch Auxiliary valve Emergency engine stop 5,000-hour hydraulic oil change External Fuel and DEF gauges interval Fan housing 1,000-hour hydraulic filter change Fuel cooler interval Fuel filter restriction indicator SAHR brake Fuel shut-off valve Idle start UPPER STRUCTURE: Radiator, oil cooler, intercooler - ISO mirrors (3) protective screen Cab ISO-mounts (fluid and spring) Upper mounted work light (70 watt) FUEL ECONOMY SYSTEMS: Swivel guard belly pan Engine Idle / Fuel Economy System: Center cover (over main CV) Auto-idle Fuel tank belly pan One-touch idle Handrail (RH access) Auto-idle shut-down Lifting eyes for counterweight BEC Boom Economy Control Lockable fuel cap, service doors and AEC Auto Economy Control toolbox SWC Swing Relief Control SSC Spool Stroke Control Page 25 of 178 -PX6D 02 C FEB-15

26 -PX6D 02 CX130D CRAWLER EXCAVATOR Standard Equipment ATTACHMENTS: OPERATOR STATION (continued): Boom 15 ft. 2 in. (4.63 m) Controls pre-wired for auxiliary Arm 8 ft. 2 in. (2.50 m) Straight travel Heavy-duty bucket linkage AM/FM radio w/ antenna, 2 speakers Boom mounted work light (70 watt) and Bluetooth capabilities Auxiliary pipe brackets Aux-in port for personal electronics Centralized grease fittings Radio mute switch (joystick) Attachment cushion valve Rear-view camera Arm and boom regeneration Anti-theft system (start code system) Bucket anti-clatter device Rubber floormat Chrome pins 12-volt electric outlet Easy Maintenance System (EMS) 24-volt cigarette lighter bushings Windshield wiper/washer Teardrop pin retention keepers Cup holder Storage compartments OPERATOR STATION: Warm/cool storage compartment ROPS protection Travel alarm with cancel switch FOPS cab (Level 1) Ignition keys Pressurized cab One key start & lock-up Face vent Cab filter (external) Cab lights (2) Cab handrails Interior dome light Operator's manual One-touch lock front window One piece window (right) UNDERCARRIAGE: Safety glass windows Long undercarriage Gate lock hydraulic activation 23.6 in. (600 mm) steel shoes, triple Emergency exit and hammer semi-grouser Clear (polycarbonate) roof window w/ Full overlap turntable bearing tub sunshade No track chain guides AC/heat/defrost w/ auto climate Hydraulic track adjustment control Sealed link chain LED Color monitor 7 in (180 mm) Steps 26 selectable languages for monitor Carbody belly pan (swivel guard) On-board diagnostic system X-pattern carbody 10 programmable attachments settings Lashing points (tie downs) on monitor - 5 single flow, 5 dual flow FRONT DOZER BLADE: Seatbelt 3 in. (76 mm) 8 ft. 6 in. (2.59m) width - comes with Heated high-back cloth seat with air 23.6 in. (600 mm) steel shoes suspension and 65o tilt adjustment Sliding seat 3.54 in. (90 mm) Adjustable armrests Tilting consoles 4-position Sliding cockpit 3.15 in. (80 mm) Low-effort joystick controls Page 26 of 178 -PX6D 02 C APR-15

27 -PX6D 02 CX130D CRAWLER EXCAVATOR Standard Equipment EXTRA FILTER KIT: OPTIONAL EQUIPMENT (continued): Engine oil filter FRONT DOZER BLADE Filter wrench Hydraulically controlled front dozer Fuel filters blade Grease gun 8 ft. 2 in. (2.49 m) width - comes Green plug oil drain hose for with 19.7 in. (500 mm) rubber link engine oil drain chain Hydraulic return filter 8 ft. 10 in. (2.69 m) width - comes Pilot circuit hydraulic filter with 27.6 in. (700 mm) steel shoes OPERATOR STATION CASE ProCare FOPS cab top guard (Level 2) 3-yr/3000-hr factory warranty, Front grill guard 2 x 2 in. planned maintenance and (50.8 x 50.8 mm) screen mesh SiteWatch telematics Front rock guard vertical bars (two CASE SiteWatch Telematics piece)/opg 1 includes hardware and a 3-yr Front rock guard vertical bars (one Advanced data subscription piece)/opg 2 Vandal guard (front window) w/ common key OPTIONAL EQUIPMENT: Rain deflector (not available with ENGINE Front guards) Refueling pump Sun visor HYDRAULICS Side-view camera Auxiliary hydraulics: LED Package: includes 1 Side view Single acting/joystick activated camera and 6 LED Lights (2 front Double acting/joystick activated cab mounted, 2 rear mounted and (thumb) 1 mounted on each side) Multi-function/joystick activated Secondary low-flow/joystick PARTS OFFERING: activated Hammers; Thumbs Proportional hydraulic controls Rubber bumper guard Hose Burst Check Valve (HBCV) ATTACHMENTS Heavy-duty arm 6 ft. 11 In. (2.11 m) Long arm - 9ft. 11 In. (3.01 m) Quick Coupler/Case multi-pin grabber Buckets: Heavy-duty/Extremeduty/Ditching Load holding control UNDERCARRIAGE 19.7 in. (500 mm) rubber link chain, bolt-on rubber pads on steel chain 27.6 in. (700 mm) steel shoes, triple semi-grouser Double track chain guides Page 27 of 178 -PX6D 02 C FEB-15

28 (This page intentionally left blank) Page 28 of 178

29 -PX6D 02 CX130D CRAWLER EXCAVATOR Models COMMERCIAL MODEL Weight Factory Data List Price CX130D STD LC $199, CX130D STD DZB $213, Page 29 of 178 -PX6D 02 C FEB-15

30 -PX6D 02 CX130D CRAWLER EXCAVATOR Factory Supplied Options Order Code Description Weight Factory Data List Price BOOMS SD_E5311 BOOM Standard Boom 15'2" (4.63 M) Boom No Boom Less boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided. No Charge ($3,800.00) ARMS SD_E5320 ARM/DIPPERSTICK '10" (2.11 M) Heavy-duty Arm ($500.00) ' 2" (2.50 M) Standard Arm No Charge '10" (3.0M) Standard Arm $ XE5320X No Arm/Dipperstick ($2,400.00) Less arm, bucket cylinder and linkage TRACK SHOES SD_E5199 TRACK SHOES " (600mm) Steel Shoes Triple-Grouser Steel Shoes " (700mm) Steel Shoes Triple-Grouser Steel Shoes " (500mm) Rubber Track Steel Chain with individual rubber tracks (steel base coated with rubber) No Charge $1, $11, LANGUAGE SD_47083 OPERATOR'S MANUAL French Canadian Literature No Charge Spanish Literature No Charge English Literature No Charge Page 30 of 178 -PX6D 02 C FEB-15

31 -PX6D 02 CX130D CRAWLER EXCAVATOR ADDITIONAL EQUIPMENT CXC HYDRAULIC OPTIONS SD_E6410 AUXILIARY HYDRAULICS XE6410X No Optional Hydraulics No Charge Not for use with No Boom Single Acting Auxiliary Hyd $6, Single Acting Auxiliary Hydraulics For use with hammers or vibratory compaction plate applications Joystick activated with Electronic Proportional Controls Provides single direction flow Includes manually adjustable relief valve to set required pressures Notes: 1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C/D series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Double Acting Auxiliary Hyd Double Acting Auxiliary Hydraulics For use with thumb applications $5, Joystick Activated with Electronic Proportional Controls Provides single pump, two-way flow Hydraulic plumbing provided to the end of the boom only, no piping to the arm This system is not switchable to single acting flow Notes: 1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C/D series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Page 31 of 178 -PX6D 02 C FEB-15

32 -PX6D 02 CX130D CRAWLER EXCAVATOR Multi-Function Auxiliary Hyd Multi-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushers $9, Does not include the in-cab Electronic Pressure Control feature Joystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flow Secondary Low-flow Auxiliary Hydraulics can be added Includes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applications Notes: 1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C/D Series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or SD_E6417 SECONDARY AUXILIARY HYDRAULICS XE6417X No Extra Auxiliary Hydraulics No Charge Secondary Low Flow Aux Hyd $6, Low Flow Electrical Proportional Control Joystick Activated Provides low-flow for rotation or tilt of hydraulic tools. Notes: 1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option. 2) For dealer installed auxiliary hydraulic kits contact: HKX ( or CAB OPTIONS SD_E5443 CAB GUARD (FOPS) XE5443X FOPS Top Cab Guard/Level 1 No Charge FOPS Top Cab Guard/Level 2 $1, SD_E5444 CAB GUARD (FRONT) XE5444X No Front Guard No Charge Front grill guard - 2 x 2 mesh $1, Front rock guard (OPG 1) $2, vertical bars (two piece/upper and lower) Front rock guard (OPG 2) vertical bars (one piece/full length) $2, Page 32 of 178 -PX6D 02 C FEB-15

33 -PX6D 02 CX130D CRAWLER EXCAVATOR Vandal Guard $ SD_E5449 RAIN DEFLECTOR XE5449X No Rain Deflector No Charge Rain Deflector $ Not for use with Front grill guard - 2 x 2 mesh option , Front rock guard (OPG 1) option , or Front rock guard (OPG 2) option SD_E5451 SUN VISOR XE5451X No Sun Visor No Charge Sun Visor $ WORKLIGHT OPTIONS SD_E5414 AUX. WORKLIGHTS FOR CAB Standard Working Lights No Charge LED Working Lights Package $4, LED Package includes: 6 LED lights and 1 side view camera - 2 LED lights are mounted on the front of cab, 2 rear mounted (above rear view camera), and 1 mounted on each side (2) BUCKETS SD_E6300 EXCAVATOR BUCKET(S) XE6300X No Bucket Buckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section No Charge ADDITIONAL OPTIONS SD_E5206 TRACK CHAIN GUIDE XE5206X No Track Chain Guide No Charge Double Track Chain Guide $ SD_E9730 SAFETY VALVE XE9730X No Hose Burst Check Valve No Charge Hose Burst Check Valve (HBCV) $9, boom and arm SD_E9740 SIDE VIEW CAMERA XE9740X No Side View Camera No Charge Side View Camera $ SD_E9874 REFUEL PUMP XE9874X No Refuel Pump No Charge Refuel Pump $1, Page 33 of 178 -PX6D 02 C FEB-15

34 (This page intentionally left blank) Page 34 of 178

35 -PX6D 02 CX130D CRAWLER EXCAVATOR Factory Supplied Attachments Order Code Description Weight Factory Data List Price Case Coupler Buckets " Heavy Duty Coupler Bucket with 4 teeth (.43 cu. yd.) " Heavy Duty Coupler Bucket with 4 teeth (.56 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.70 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.83 cu. yd.) Case Multi Fit Coupler Hydraulic Powerlatch Coupler Full Kit and Pins Optimized for use with Case coupler buckets. Also can be used with a wide range of buckets from other manufacturers including pin-on types. Includes hydraulic installation kit and instructions. 775 LB $4, LB $5, LB $5, ,055 LB $5, LB $8, Case Pin On Buckets " Heavy Duty Bucket 969 LB $3, with 4 teeth (.43 cu. yd.) " Heavy Duty Bucket 1,073 LB $3, with 4 teeth (.56 cu. yd.) " Heavy Duty Bucket 1,227 LB $3, with 5 teeth (.70 cu. yd.) " Extra Heavy Duty Bucket 1,050 LB $3, with 4 teeth (.51 cu. yd.) " Extra Heavy Duty Bucket 1,200 LB $4, with 4 teeth (.66 cu. yd.) " Extra Heavy Duty Bucket 1,375 LB $4, with 5 teeth (.81 cu. yd.) " Extra Heavy Duty Bucket 1,500 LB $4, with 5 teeth (.97 cu. yd.) " Ditching Bucket (.79 cu. yd.) 860 LB $3, " Ditching Bucket (1.02 cu. yd.) 1,000 LB $3, " Heavy Duty Bucket with 5 teeth (.83 cu. yd.) 1,351 LB $4, Page 35 of 178 -PX6D 02 C FEB-15

36 (This page intentionally left blank) Page 36 of 178

37 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT Standard Equipment ENGINE: OPERATOR'S CAB (Continued): Isuzu AM-4JJ1X Cab interior features: Tier-4a Interim Certified (cooled EGR) Cup holder 183 cubic in. displacement/3.0 Liter Storage compartments Turbocharged/air cooled intercooler Warm/cool storage compartments Horsepower: Easy access fuse box Net: 100 ( RPM Interior dome light High pressure common rail system One touch lock front window Auto engine warm-up One key start & lock-up FEA (Fuel Economy Assist System) Interior Light (1 x 10 watt) Engine Idle/Fuel Economy System: Two-speed independent travel Auto Idle Straight travel One-touch Idle Travel alarm and horn Idle Shut-down Windshield wiper and washer Fuel Capacity: Programmable anti-theft system 53 gallons (200 L) AEC (auto economy control) ELECTRICAL: BEC (boom economy control) 24-volt system Two batteries (12 volt/92 Ah) OPERATOR'S CAB: 50 Amp Alternator ROPS protection Worklights (4 x 70 watt) Pressurized cab area Boom mounted (1) AC/heat/defrost with auto control Upper mounted (1) Electronics: Cab top mounted (2) Color monitor (7 in/180 mm) with Rearview camera view HYDRAULICS: Rearview camera Open-center system design AM/FM radio with antenna and Optional auxiliary hydraulics 2-speakers Selectable work modes (3) Aux-in port for personal electronics Auto power boost 12-volt electric socket Auto swing priority 24-volt cigarette lighter SWC (swing relief control) KAB Air-suspension seat (cloth) SSC (spool stroke control) Seat belt 5000 hour hydraulic oil change interval Adjustable arm rests 1000 hour hyd. filter change interval 4-position tilting consoles Sliding cockpit (7 in/180 mm) Low-effort joystick controls Clear (poly carbonate) roof window External rearview mirrors Rubber floormat Page 37 of 178 -PX6E 01 C FEB-15

38 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT Standard Equipment UNDERCARRIAGE: OPTIONAL EQUIPMENT: X-pattern carbody Cab and Operator s Station: Undercarriage: Side view camera STD LC: 12 4 (3.76 M) length Sun visor STD DZB: 11 6 (3.50 M) length FOPS top cab guard (Level 2) Track Gauge: Front grill guard (2 x 2 mesh) STD: 6 6 (1.99 M) gauge Front rock guard (OPG 1) Shoe: Front rock guard (OPG 2) STD: 23.6 triple grouser Vandal guard 6.75 pitch Rain deflector 43 shoes per side Control pattern change selector LC: Carrier rollers (2 per side) Free swing DZB: Carrier rollers (1 per side) Hose burst check valve (HBCV) LC: Track rollers (7 per side) Refueling Pump DZB: Track rollers (7 per side) Auxiliary hydraulics Grease lubricated and strutted track Attachments: chains Arm: 6 10 (2.10 M) Standard Arm Hydraulic track adjustment (for offset boom only) Single track chain guides Arm: 6 10 (2.10 M) Heavy-duty SAHR disc parking break Arm: 9 10 (3.00 M) Standard Arm Tapered upper track frame Undercarriage: DOZER BLADE: Rubber shoes: 23.6 (600 mm) Dozer blade width: 8 6" (2590 mm) Steel/triple-grouser: 27.6 (700 mm) Dozer blade height: 22" (570 mm) Track chain guides double ATTACHMENTS: Order from Wholegood Attachments Standard LC and DZB Versions: -Third Party section: Boom: 15 2 (4.63M) Buckets Arm: 8 2 (2.50 M) Coupler/Case multi-pin grabber Heavy-duty bucket linkage Auxiliary pipe brackets Attachment cushion valve Arm and boom regeneration Arm and boom holding valves Centralized grease bank CASE ProCare 3-yr/3000-hr factory warranty, planned maintenance and SiteWatch telematics CASE SiteWatch Telematics includes hardware and a 3-yr Advanced data subscription Page 38 of 178 -PX6E 01 C FEB-15

39 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT Models COMMERCIAL MODEL Weight Factory Data List Price CX145C MSR LC 39,500 LB $186, CX145C MSR W/DOZER 31,746 LB $202, Page 39 of 178 -PX6E 01 C FEB-15

40 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT Factory Supplied Options Order Code Description Weight Factory Data List Price BOOMS SD_E5311 BOOM Standard Boom 15' 6" (4.72 M) Standard Boom Offset Boom 15' 6" (4.72 M) Offset Boom For use with CX145C MSR W/DOZER No Boom Less boom, hoist and arm cylinders and plumbing. Boom foot and cylinder pins are provided. No Charge $24, ($3,898.00) ARMS SD_E5320 ARM/DIPPERSTICK ' 2" (2.50 M) Standard Arm For use with CX145C MSR LC and CX145C MSR W/DOZER FOR USE WITH STANDARD BOOM (options ) ' 10" (2.11 M) Standard Arm For use with CX145C MSR W/DOZER FOR USE WITH OFFSET BOOM (options ) '10" (2.11 M) Heavy-duty Arm For use with CX145C MSR LC and CX145C MSR W/DOZER FOR USE WITH STANDARD BOOM (options ) (Recommended for heavy-duty applications - example: hammer) '10" (3.0M) Standard Arm For use with CX145C MSR LC and CX145C MSR W/DOZER FOR USE WITH STANDARD BOOM (options ) XE5320X No Arm/Dipperstick Less arm, bucket cylinder and linkage No Charge $ $ $1, ($2,367.00) TRACK SHOES SD_E5199 TRACK SHOES "(600mm) Steel Shoes Triple-Grouser Steel Shoes " (700mm) Steel Shoes Triple-Grouser Steel Shoes No Charge $1, Page 40 of 178 -PX6E 01 C FEB-15

41 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT " (500mm) Rubber Track Steel Chain with individual rubber tracks (steel base coated with rubber) $9, LANGUAGE SD_47083 OPERATOR'S MANUAL English Literature No Charge French Canadian Literature No Charge Spanish Literature No Charge ADDITIONAL EQUIPMENT CXC HYDRAULIC OPTIONS SD_E6410 AUXILIARY HYDRAULICS XE6410X No Optional Hydraulics No Charge For use with Standard Boom Single Acting Auxiliary Hyd $6, Single Acting Auxiliary Hydraulics For use with hammers or vibratory compaction plate applications Joystick activated with Electronic Proportional Controls Provides single direction flow Includes manually adjustable relief valve to set required pressures Notes: 1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Page 41 of 178 -PX6E 01 C FEB-15

42 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT For use with Offset Boom Double Acting Auxiliary Hyd Double Acting Auxiliary Hydraulics For use with thumb applications $5, Joystick Activated with Electronic Proportional Controls Provides single pump, two-way flow Hydraulic plumbing provided to the end of the boom only, no piping to the arm This system is not switchable to single acting flow Notes: 1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Multi-Function Auxiliary Hyd Multi-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushers $8, Does not include the in-cab Electronic Pressure Control feature Joystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flow Secondary Low-flow Auxiliary Hydraulics can be added Includes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applications Notes: 1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C Series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Page 42 of 178 -PX6E 01 C FEB-15

43 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT Offset Boom Single Aux Hyd Offset Boom Single Acting Auxiliary Hydraulics For use with Offset Boom option only For use with hammer applications $6, Joystick Activated with Electronic Proportional Controls Provides single direction flow Includes manually adjustable relief valve to set required pressures Notes: 1) Not for use other Auxiliary Hydraulics options, with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or Offset Boom Double Aux Hyd Offset Boom Double Acting Auxiliary Hydraulics For use with Offset Boom option only For use with thumb applications $6, Joystick Activated with Electronic Proportional Controls Provides single pump, two-way flow Hydraulic plumbing provided to the end of the boom only, no piping to the arm This system is not switchable to single acting flow Notes: 1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow. 2) Heavy duty bucket linkage is standard equipment on C series excavators. 3) For dealer installed auxiliary hydraulic kits contact: HKX ( or SD_E6417 SECONDARY AUXILIARY HYDRAULICS XE6417X No Extra Auxiliary Hydraulics No Charge Page 43 of 178 -PX6E 01 C FEB-15

44 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT Secondary Low Flow Aux Hyd Secondary Low Flow Auxiliary Hydraulics Provides low-flow for rotation or tilt hydraulic attachments. $6, For use with Standard Boom option Not for use with Offset Boom option Joystick Activated with Electronic Proportional Controls Notes: 1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option. 2) For dealer installed auxiliary hydraulic kits contact: HKX ( or SD_E6423 CONTROL PATTERN SELECTION XE6423X No Control Pattern Valve No Charge Control Pattern Selector Valve $ CAB OPTIONS SD_E5443 CAB GUARD (FOPS) XE5443X FOPS Top Cab Guard/Level 1 No Charge FOPS Top Cab Guard/Level 2 $1, SD_E5444 CAB GUARD (FRONT) XE5444X No Front Guard No Charge Front grill guard - 2 x 2 mesh $1, Front rock guard (OPG 1) $2, vertical bars (two piece/upper and lower) Front rock guard (OPG 2) $2, vertical bars (one piece/full length) Vandal Guard $ SD_E5449 RAIN DEFLECTOR XE5449X No Rain Deflector No Charge Rain Deflector $ Not for use with Front grill guard - 2 x 2 mesh option , Front rock guard (OPG 1) option , or Front rock guard (OPG 2) option SD_E5451 SUN VISOR XE5451X No Sun Visor No Charge Sun Visor $ Page 44 of 178 -PX6E 01 C FEB-15

45 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT BUCKETS SD_E6300 EXCAVATOR BUCKET(S) XE6300X No Bucket Buckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section No Charge ADDITIONAL OPTIONS SD_E5206 TRACK CHAIN GUIDE XE5206X No Track Chain Guide No Charge Double Track Chain Guide $ SD_E9730 SAFETY VALVE XE9730X No Hose Burst Check Valve No Charge Hose Burst Check Valve (HBCV) $9, boom and arm SD_E9740 SIDE VIEW CAMERA XE9740X No Side View Camera No Charge Side View Camera $ SD_E9741 FREE SWING XE9741X No Free Swing No Charge Free Swing $ switch activated SD_E9874 REFUEL PUMP XE9874X No Refuel Pump No Charge Refuel Pump $1, Page 45 of 178 -PX6E 01 C FEB-15

46 (This page intentionally left blank) Page 46 of 178

47 -PX6E 01 CX145C MIN SWING RADIUS CRAWLER EXCAVAT Factory Supplied Attachments Order Code Description Weight Factory Data List Price Case Pin On Buckets " Heavy Duty Bucket 969 LB $3, with 4 teeth (.43 cu. yd.) " Heavy Duty Bucket 1,073 LB $3, with 4 teeth (.56 cu. yd.) " Heavy Duty Bucket 1,227 LB $3, with 5 teeth (.70 cu. yd.) " Heavy Duty Bucket 1,351 LB $4, with 5 teeth (.83 cu. yd.) " Extra Heavy Duty Bucket 1,050 LB $3, with 4 teeth (.51 cu. yd.) " Extra Heavy Duty Bucket 1,200 LB $4, with 4 teeth (.66 cu. yd.) " Extra Heavy Duty Bucket 1,375 LB $4, with 5 teeth (.81 cu. yd.) " Extra Heavy Duty Bucket 1,500 LB $4, with 5 teeth (.97 cu. yd.) " Ditching Bucket (.79 cu. yd.) 860 LB $3, " Ditching Bucket (1.02 cu. yd.) 1,000 LB $3, Case Coupler Buckets " Heavy Duty Coupler Bucket with 4 teeth (.43 cu. yd.) " Heavy Duty Coupler Bucket with 4 teeth (.56 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.70 cu. yd.) " Heavy Duty Coupler Bucket with 5 teeth (.83 cu. yd.) Case Multi Fit Coupler Hydraulic Powerlatch Coupler Full Kit and Pins Optimized for use with Case coupler buckets. Also can be used with a wide range of buckets from other manufacturers including pin-on types. Includes hydraulic installation kit and instructions. 775 LB $4, LB $5, LB $5, ,055 LB $5, LB $8, Page 47 of 178 -PX6E 01 C FEB-15