Presented by. OSHA Training Program Information and Application

Transcription

1 Presented by OSHA Training Program Information and Application

2 OSHA OSHA TRAINING PROGRAM INFORMATION OSHA CLASSES In addition to our many other training programs, we now offer OSHA 10 Hour and OSHA 30 Hour Construction Training Courses. WHY IS OSHA TRAINING IMPORTANT? OSHA helps companies protect their employees and reduce the amount of workplace related illnesses, injuries and deaths. OSHA gives workers the right to a safe workplace, information on hazardous chemicals and to present safety concerns to management without fear of discrimination or termination. OSHA also gives workers the opportunity to report any safety violation directly to the agency while keeping their identities anonymous from their employers. OSHA inspections ensure that companies are providing a safe workplace for employees, and the agency can issue citations and fines to companies that have safety violations. Inspections occur on a regular basis, but inspections also occur after an accident at the location or a worker complaint. OSHA has been credited with decreasing the number of workplace fatalities by more than 65 percent since OSHA 10 HOUR CONSTRUCTION COURSE - 2 Day Class, 8 AM 5 PM Who Needs the OSHA 10 Construction Course? Workers - Employees working on site need OSHA 10 Hour Construction Card Topics Include: Introduction to OSHA (Workers Rights, Responsibilities, and Procedures) 2 Hours Minimum Focus 4 Hazards (Falls, Electrocution, Struck-By, Caught-In/Between) 4 Hours Minimum Personal Protective and Lifesaving Equipment (PPE) 30 Minutes Minimum Health Hazards in Construction (Noise, Haz Com, Crystalline Silica, etc.) 30 Minutes Minimum Cranes, Derricks, Hoists, Elevators, & Conveyors - 30 Minutes Minimum Excavations 30 Minutes Minimum Materials Handling, Storage, Use and Disposal 30 Minutes Minimum Scaffolds - 30 Minutes Minimum Stairways and Ladders - 30 Minutes Minimum Tools (Hand and Power) 30 Minutes Minimum Optional (other industry hazards or expansion of above topics) 1 Hour Training book that you can reference for future projects 321 VZ County Road 4500 Ben Wheeler Texas Phone Fax

3 OSHA 30 HOUR CONSTRUCTION COURSE - 4 Day Class, 8 AM 5 PM Who Needs the OSHA 30 Construction Course? Supervisors - On-site supervisors need OSHA 30 Hour Construction Card Topics Include: Introduction to OSHA (Workers Rights, Responsibilities, and Procedures) 2 Hours Minimum Managing Safety and Health (Prevention Programs, Inspections, Analysis, Investigations, Meetings, Communication) 2 Hours Minimum Focus 4 Hazards (Falls, Electrocution, Struck-By, Caught-In/Between) 6 Hours Minimum Personal Protective and Lifesaving Equipment (PPE) 2 Hours Minimum Health Hazards in Construction (Noise, Haz Com, Crystalline Silica, etc.) 2 Hours Minimum Stairways and Ladders -- 1 Hour Minimum Concrete and Masonry Construction 1 Hour Minimum Confined Space Entry 1 Hour Minimum Cranes, Derricks, Hoists, Elevators, & Conveyors -- 1 Hour Minimum Ergonomics 1 Hour Minimum Excavations 1 Hour Minimum Fire Protection and Prevention 1 Hour Minimum Materials Handling, Storage, Use and Disposal 1 Hour Minimum Motor Vehicles, Mechanized Equipment, Signs, Signals, Barricades 1 Hour Minimum Powered Industrial Vehicles 1 Hour Minimum Safety and Health Programs 1 Hour Minimum Scaffolds -- 1 Hour Minimum Steel Erection 1 Hour Minimum Tools (Hand and Power) 1 Hour Minimum Welding and Cutting 1 Hour Minimum Optional (other industry hazards or expansion of above topics) 3 Hours Training book that you can reference for future projects For More Information, Please Contact: training@doorcontrolsusa.com Ben Calhoun / Director of Training / ext. 166 / bcalhoun@doorcontrolsusa.com 321 VZ County Road 4500 Ben Wheeler Texas Phone Fax

4 This form must be submitted no later than 2 weeks prior to scheduled class date Class size will be limited to 40 students and will be filled according to date of received application Please confirm your enrollment with our training department before making travel arrangements APPLICATION FOR OSHA 10 AND OSHA 30 PLEASE PRINT LEGIBLY AND COMPLETE ALL SECTIONS FIRST NAME LAST NAME CUSTOMER # APPLICANT S EMPLOYER JOB POSITION BUSINESS PHONE STREET ADDRESS CITY STATE ZIP ADDRESS OWNER/PRESIDENT S NAME DO YOU CURRENTLY HOLD A 10 HOUR OR 30 HOUR OSHA CONSTRUCTION CARD? DO YOU WORK ON AUTOMATIC PEDESTRIAN DOORS? ARE YOU AAADM CERTIFIED? WHAT INDUSTRY DO YOU SERVICE? IS YOUR COMPANY A DISTRIBUTOR OF ANY BRAND? ARE YOU AN ONSITE SUPERVISOR OR WORKER? 2017 OSHA TRAINING SCHEDULE PLEASE SELECT THE DATE AND CLASS THAT YOU PLAN TO ATTEND OSHA 10 Hour Construction Course Training Dates Jan Feb Apr May Jun Aug Sep Oct Nov Dec OSHA 30 Hour Construction Course Training Dates Jan Mar Apr May Jul Sep Nov Application to: training@doorcontrolsusa.com Or, Fax Application to: Ben Calhoun / Director of Training / ext. 166 / bcalhoun@doorcontrolsusa.com 321 VZ County Road 4500 Ben Wheeler Texas Phone Fax

5 2017 OSHA CONSTRUCTION COURSES TRAINING FEES Applicants should submit their completed training application along with check made payable to Door Controls USA, Inc. or complete the credit card payment form below. Please send all completed paperwork to Door Controls USA, Inc. for processing. CREDIT CARD PAYMENT FORM DOOR CONTROLS USA OSHA TRAINING FEES Students Name: CUSTOMER NUMBER: Company Name: INVOICE NUMBER: OSHA 10 Hour - $250 OSHA 30 Hour - $500 CREDIT CARD NUMBER: EXP DATE: SEC CODE: NAME ON CARD: CREDIT CARD BILLING ADDRESS: CITY: _ STATE: ZIP: PHONE NUMBER: CONFIRMATION REQUESTED: FAX NO FAX NUMBER: (PREFERRED) ATTN: TAKEN BY: 321 VZ County Road 4500 Ben Wheeler Texas Phone Fax

6 LODGING SUGGESTIONS DCS Inn.5 miles 121 PR 8773 Ben Wheeler, TX (903) (This is a Door Controls USA, Inc. Property*) $65.00 per night Low Places 1.5 miles 2189 VZ County Road 4501 Ben Wheeler, TX (903) (This is a Door Controls USA, Inc. Property*) $85.00 per night *For more information regarding lodging at one of the Door Controls USA, Inc. Properties, please contact: marketing@doorcontrolsusa.com or Quality Inn 15 minutes 2406 North Trade Days Blvd (Hwy 19) Canton, TX (903) (Ask for Door Controls USA Rate) (free breakfast, WIFI, pool, spa) $64.99 per night (Price may Increase during First Monday Trade Day: $80 to $120) If making reservations online, please call to confirm. Super 8 Motel 15 minutes I-20 Canton, TX (903) (Ask for Door Controls USA Rate) $59.00 per night (Price may Increase during First Monday Trade Day: $70 to $110) If making reservations online, please call to confirm. Holiday Inn Express Hotel & Suites 28 minutes 1119 E Tyler St Athens, TX (903) (Ask for Door Controls USA Rate) (free breakfast) $77.00 per night - If making reservations online, please call to confirm. La Quinta Inn and Suites 30 minutes 204 West Centennial Blvd Lindale, TX (903) (Ask for Door Controls USA Rate) 10% off bar rate - If making reservations online, please call to confirm. Hampton Inn 30 minutes 3505 South Main Lindale, TX (903) (Ask for Door Controls USA Rate) $89.00 per night - If making reservations online, please call to confirm.

7 Notes Trip to: Door Controls USA Inc 321 Vz County Road 4500 Ben Wheeler, TX (903) miles 1 hour 41 minutes From Dallas-Fort Worth International Airport (DFW) to Door Controls USA, Inc. Dallas-Fort Worth International Airport (DFW) 3200 E Airfield Dr, Dfw Airport, TX (972) Start out going north on E Airfield Dr toward E 31st St. Miles Per Section Go 0.1 Mi Miles Driven 0.1 mi 2. Make a U-turn at E 31st St onto E Airfield Dr. If you reach E 30th St you've gone about 0.1 miles too far Go 0.5 Mi 0.7 mi 3. Turn left onto W Walnut Hill Ln. If you are on S Airfield Dr and reach S 26th Ave you've gone about 0.7 miles too far Go 0.9 Mi 1.5 mi 4. Turn slight right onto TX-161. TX-161 is just past Orion Dr Calvary Church is on the corner If you reach Esters Rd you've gone about 0.2 miles too far Go 0.6 Mi 2.2 mi 5. Merge onto TX-161 S via the ramp on the left. Go 0.9 Mi 3.0 mi 6. Merge onto TX-183 E toward Dallas. Go 9.9 Mi 13.0 mi 7. TX-183 E becomes I-35E S / US-77 S. Go 5.1 Mi 18.1 mi 8. Merge onto I-30 E via EXIT 428A on the left toward Texarkana. Go 8.1 Mi 26.2 mi 9. Keep right to take US-80 E via EXIT 53B toward Terrell. Go 19.1 Mi 45.3 mi 10. Take TX-557-SPUR E toward I-20 E / Shreveport. Go 4.4 Mi 49.7 mi

8 11. Merge onto I-20 E via the exit on the left toward Shreveport. Go 37.5 Mi 87.2 mi 12. Take EXIT 537 toward FM-773 / Van / FM-16 / Ben Wheeler. Go 0.2 Mi 87.3 mi 13. Stay straight to go onto I-20 E. Go 0.2 Mi 87.6 mi 14. Take the 1st right onto FM-773. If you are on I-20 E and reach FM-16 you've gone about 0.3 miles too far Go 5.2 Mi 92.8 mi 15. Turn left onto TX-64. TX-64 is 0.5 miles past Oates Dr If you reach FM-279 you've gone about 0.2 miles too far 16. Take the 2nd left onto VZ County Road VZ County Road 4500 is 0.1 miles past VZ County Road 4501 If you reach FM-858 you've gone a little too far VZ COUNTY ROAD 4500 is on the right. If you reach VZ County Road 4501 you've gone about 0.2 miles too far Go 0.4 Mi Go 0.09 Mi 93.2 mi 93.3 mi 93.3 mi Door Controls USA Inc 321 Vz County Road 4500, Ben Wheeler, TX (903) mi 93.3 mi Total Travel Estimate: miles - about 1 hour 41 minutes 10mi 20km 2011 MapQuest - Portions 2011, Intermap Terms

9 Notes Trip to: Door Controls USA, Inc 321 Vz County Road 4500 Ben Wheeler, TX (903) miles 1 hour 29 minutes From Dallas Love Field (DAL) to Door Controls USA, Inc. Dallas Love Field (DAL) 8008 Cedar Springs Rd, Dallas, TX (214) Start out going southeast on Cedar Springs Rd / Herb Kelleher Way toward Aviation Pl. Continue to follow Cedar Springs Rd. Miles Per Section Go 1.8 Mi Miles Driven 1.8 mi 2. Turn left onto Inwood Rd. Inwood Rd is 0.4 miles past Manor Way Maple Lawn Elementary School is on the corner If you reach Cherrywood Ave you've gone a little too far 3. Take the 3rd right onto Lemmon Ave. Lemmon Ave is just past Rawlins St Cvs Pharmacy is on the right If you reach Lemmon Wood Plz you've gone about 0.1 miles too far 4. Turn right onto N Central Expy. N Central Expy is 0.1 miles past Howell St If you reach N Washington Ave you've gone about 0.1 miles too far Go 0.4 Mi Go 2.7 Mi Go 0.6 Mi 2.2 mi 4.8 mi 5.4 mi 5. Merge onto I-45 S via the ramp on the left toward I-30. Go 0.7 Mi 6.2 mi 6. Merge onto I-30 E / US-67 N via EXIT 284A. Go 6.8 Mi 13.0 mi 7. Keep right to take US-80 E via EXIT 53B toward Terrell. Go 19.1 Mi 32.1 mi 8. Take TX-557-SPUR E toward I-20 E / Shreveport. Go 4.4 Mi 36.4 mi 9. Merge onto I-20 E via the exit on the left toward Shreveport. Go 37.5 Mi 74.0 mi 10. Take EXIT 537 toward FM-773 / Van / FM-16 / Ben Wheeler. Go 0.2 Mi 74.1 mi

10 11. Stay straight to go onto I-20 E. Go 0.2 Mi 74.4 mi 12. Take the 1st right onto FM-773. If you are on I-20 E and reach FM-16 you've gone about 0.3 miles too far Go 5.2 Mi 79.6 mi 13. Turn left onto TX-64. TX-64 is 0.5 miles past Oates Dr If you reach FM-279 you've gone about 0.2 miles too far 14. Take the 2nd left onto VZ County Road VZ County Road 4500 is 0.1 miles past VZ County Road 4501 If you reach FM-858 you've gone a little too far VZ COUNTY ROAD 4500 is on the right. If you reach VZ County Road 4501 you've gone about 0.2 miles too far Go 0.4 Mi Go 0.09 Mi 80.0 mi 80.1 mi 80.1 mi Door Control Service Inc 321 Vz County Road 4500, Ben Wheeler, TX (903) mi 80.1 mi Total Travel Estimate: miles - about 1 hour 29 minutes 10mi 20km 2011 MapQuest Terms