PC750LC-6 PC750LC-6 MATERIAL HANDLER. NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 196, ,700 lb REACH

Transcription

1 PC750LC-6 MATERIAL HANDLER NET HORSEPOWER 338 kw 454 HP OPERATING WEIGHT kg 196, ,700 lb REACH m 55' - 62' Note: For standard specifications and features, refer to the Komatsu PC750LC-6 catalog. PC750LC-6 Working MATERIAL HANDLER Gear

2 The Komatsu PC Material Handling series is a full product line with solutions for all of your material handling needs. Komatsu...the unparalleled, one-stop shopping source for rugged and cutting edge material handling equipment! PC750LC-6 Material Handler For Use In: Scrap Processing 4 Stockpiling of recycled materials 4 Transfer station material feeding Bulk Material Handling 4 Coal, coke and ore 4 Sand and gravel 4 Grain Material Handling System Includes: Front attachment with underslung hydraulic cylinders (Customer can select 2 attachment sizes) Plumbing for grapple operation Electrical cable for magnet operation Centralized lube plumbing Magnet connecting link Manual tilt cab riser Material Handler Product Line Features: Centralized lubrication points decrease service time Dual function machine grapple or magnet operation Elevated cab offers excellent all-around visibility Excellent stability insured by Long Track and wide gauge Three pump system assures smooth, fast compound movements maximizing productivity Access platform with stairs and railings Front window guard Hydraulic control package to provide functions to open, close, and rotate grapple Includes control handles and switches in cab Hydraulic-driven 33 kw generator from engine PTO Generator controller and magnet instrumentation mounted in the cab riser Load power gauge with operating switches installed in operator s cab Parts, service, and operator s manual 762 mm 30" widen carbody Model PC270LC-6 PC300MH PC400MH PC600LC-6 PC750LC-6 PC1250LC-7 Kilograms Pounds 70,000 95, , , , ,474

3 PC750LC-6 MATERIAL HANDLER 2-Piece Front STANDARD EQUIPMENT (In addition to PC750LC-6 base variable gauge machine) 2-piece front attachment with hydraulic cylinders 1981 mm 78" manual tilt cab riser with platform, stairs and handrails Lift Performance Front window guard 33 kw hydraulic driven generator Hydraulic plumbing and control package for grapple operation Electrical cable and generator controller for magnet operation Variable wide gauge undercarriage SPECIFICATIONS Komatsu SAA6D140E-2 turbocharged & aftercooled diesel engine Flywheel Horsepower kw rpm (SAE J1349) Operating Weight w/o Grapple 16.7 m 55' kg 196,350 lbs 18.9 m 62' kg 203,700 lbs LIFT CAPACITIES TIPPING OVER FRONT TIPPING OVER SIDE (x 1000 lb.) Note: Capacities are measured at the bare stick tip of the third member. Capacities marked with an asterisk (*) are limited by hydraulic capacities rather than stabilities. Young 2-Piece Front 16.7 m 55' (KO2US55) Reach (ft.) Young 2-Piece Front 18.9 m 62' (KO2US62) Reach (ft.) (ft.) *14.5 *14.5 *18.0 *18.0 * * * * * * * *16.8 *16.8 *17.4 *17.4 *23.0 *23.0 * * * * * * *18.2 *18.2 *20.7 *20.7 *25.4 *25.4 * * * * * * * * *22.0 *22.0 *29.1 *29.1 *30.9 *30.9 *32.8 *32.8 *35.5 *35.5 * * * * * * * *29.4 *29.4 *27.9 *27.9 *33.0 *33.0 *35.3 *35.3 *39.7 *39.7 * * * * * * *35.1 *35.1 *37.1 *37.1 *47.7 *47.7 * * * * * *41.6 *41.6 *69.6 *69.6 * * *42.7 * *16.9 *16.9 *19.4 *19.4 *23.8 *23.8 *9.3 *9.3 (ft.) * * * * *14.4 *14.4 *14.7 *14.7 *23.9 *21.0 * * * *16.2 *16.2 *19.3 *19.3 *23.6 * * * * *21.4 *21.4 *25.2 *25.2 *28.0 *28.0 * * *31.6 * * * * * * * *22.4 *22.4 *26.1 *26.1 *28.5 *28.5 *32.9 *32.9 *35.2 *35.2 * * * * * * * *28.1 *28.1 *22.6 *22.6 *28.7 *28.7 *30.2 *30.2 *33.8 *33.8 *40.5 *40.5 *41.2 *41.2 * * * * * *32.4 *32.4 *27.4 *27.4 *36.1 *36.1 *48.1 *48.1 *49.1 *49.1 * * * *39.2 *39.2 *57.8 *57.8 *59.6 *59.6 *59.9 *59.9 * * *21.0 *21.0 *22.9 *22.9 *9.4 *9.4 *12.7 * Lifting capacities shown do not exceed 75% of minimum tipping loads of 87% of hydraulic capacities. Data supplied by AEM. 2. Lifting capacities shown should not be exceeded. Weight of all lifting accessories must be considered part of the load. 3. Lifting capacities assume the machine is standing level on a firm, uniform supporting surface. The user must make allowances for unfavorable job conditions such as soft or uneven ground or sudden stopping of loads. 4. The least stable position is over the side. 5. The operator should be fully acquainted with the Operation Manual before operating the machine. 6. Capacities apply only to the machine equipped as stated here. 7. Capacities are based on PCSA gross rated loads.

4 The PC750LC-6 is spacious and provides a comfortable working environment Operator s Cab Multi-Position Controls The multi-position, pressure proportional control levers allow the operator to work in comfort while maintaining precise control. A double-slide mechanism allows the seat and controllers to move together or independently, allowing the operator to position the controllers for maximum productivity and comfort. Cab Mounts The cab rests on viscous damping mounts to reduce vibration and noise from the machine body. Operator fatigue is reduced. Noise The noise levels at the operator s ear have been decreased by improving the cab mounts, and reducing engine operating noise. The multi-position diagnostic monitor is easily reached and can be rotated to remove glare. Plus, the inclined dashboard makes the switches and fuel control dials easier to view and use. Cab mounts Floor Revolving Frame Rubber Silicon Oil

5 Grapple Specifications Komatsu Model PC750LC-6 Grapple Model L0-400B N Size m yd Weight kg w/rotator lb 8,000 11,800 A mm in B mm in C mm in D mm in Typical 4-Tine Grapple (Orange Peel) 1. Grapple Tines 2. Grapple Cylinders Grapple Rotator 4. Mounting Pin Grapple Applications: Select a grapple whose weight including material does not exceed the lift capacity shown for your specific machine. Note: Conditions and material densities vary. Confirm your specific load density before determining safe machine balance. General Material Weights: 1. Steel scrap, clippings compressed or bundled weighs approximately 2,025 lbs 912 kg per yd Shredded steel scraps, unprepared weighs approximately 1,350 lbs 608 kg per yd 3. General Magnet Selection Guide Approximate Approximate Magnet Magnet Generator Magnet Lifting Capacity Diameter KW Rating Operating Weight A B C mm in kg lb kg lb kg lb kg lb T 816 1, M T , , , M T , , , M T , , , , M T , , , , M , , , ,000 T = Typical M = Maximum Magnet Applications: Select a magnet whose weight, including lifted material, does not exceed the lift capacity shown for your specific machine. Legend: A: Pig iron and #1 hot melt; refers in general to low iron content slag or slabs. B: #2 broken; scrap steel or cut offs. C: Steel turnings; scrap from machining processes.

6 Shipping Weights and Dimensions (approximate) 2-Piece Front Model: KO2US55 Description Boom Stick mm ft in 31'6" 26'2" Width mm ft in 4'0" 1'10" mm ft in 5'0" 4'2" Weight kg lb 15,450 7,500 2-Piece Front Model: KO2US62 Description Boom Stick mm ft in 39'9" 26'2" Width mm ft in 4'0" 1'10" mm ft in 5'0" 4'2" Weight kg lb 21,400 7,500 Arm Cylinder Group 2-Piece Front Description 55' 62' mm ft in 10'0" 10'4" Width mm ft in 4'0" 4'6" mm ft in 1'10" 2'6" Weight kg lb 4,500 5,900 Grapple Platform, Ladder, and Railing Description Model L0400B Dimensions L x W x H mm 3658 x 2438 x 2591 ft in 12'0" x 8'0" x 8'6" Weight kg 3719 lb 8,200 Description/Model Dimensions L x W x H mm 1845 x 1245 x 168 ft in 6'1" x 4'1" x 3'10" Weight kg 200 lb 440 Upper Structure & Frame Undercarriage (LC) 750 Others Counterweight Catwalk Others FOPS Weight: kg 52,250 lb Weight: kg x 2 28,800 lb Weight: kg 27,800 lb STANDARD EQUIPMENT Air cleaner, double element Air conditioner, 20,000 btu; heater, 39,400 btu Alternator, 75 A/24 V AM/FM radio Arm/boom holding valve Auto deceleration Auto warm-up Batteries, 220 Ah/2 x 12 V Cab which includes antenna, ashtray, cigarette lighter, floormat, front windshield wiper, storage box, suspension seat, and 3" seat belt Catwalk Controls, wrist type Counterweight, kg 26,450 lb Dustproof net for radiator Electronic controller Guard, fan Heavy lift system Inline filters, 2 Lights, 4 cab, RH, 2 boom Overheat prevention Pump/engine room partition Rearview mirror, RH and LH Shoes: 810 mm 32" double grouser Starting motor, 11 kw Swing holding brake Swing/boom priority mode Track, guiding guard Travel alarm Turbocharger cover Vandalism protection provision tabs Variable track gauge Working modes, 3 OPTIONAL EQUIPMENT Additional service valve Cab riser, 1981 mm 78" manual tilt with stairs and platform Front assembly: 16.7 m 55' 2 piece material handler 18.9 m 62' 2 piece material handler Generator Package Modular 33 kw generator and controller Hydraulic Control Manifold Meter package (volt and amp) Power cable to end of stick Grapples 3.06 m yd 3 orange peel 3.8 m yd 3 orange peel OPG, Operator Protective Guard, (ISO) level 2 Shoes: 1010 mm 40" double grouser 1110 mm 44" double grouser Track roller guards, full length Widen carbody 762 mm 30" AESS Printed in USA DK05/03(2.5M) SFI 5/03(EV-1) 440 N. Fairway Drive Vernon Hills, IL Materials and specifications are subject to change without notice is a trademark of Komatsu Ltd. Japan