Good To Drill Happy Drilling Forever With PRD RIGS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Good To Drill Happy Drilling Forever With PRD RIGS"

Transcription

1 Good To Drill Happy Drilling Forever With PRD RIGS

2 paranthaman Exporters About Us :- PRD Rigs Good To Drill

3 Water Well Drilling Rigs PRD Max Drill ½ to 20 dia upto 1000 Mtrs Pull up force 31,000 kgf Pull down force 22,000 kgf Top head rotary drive 1170kgs - mtr torque, rpm Optional 10 x 7 1/2 or 8 x 7 1/2 high pressure engine driven Duplex double acting mud pump on separate skid Suitable compressor 1500 cfm /400 psi, 1200cfm/ 350 psi PRD OZ Drill 6 to 20 dia upto 750 Mtrs Pull up force 21,500 kgf Pull down force 14,500 kgf Top head rotary drive 1030kgs - mtr torque, rpm Optional 8 x 7 1/2 high pressure hydraulic driven Duplex double acting mud pump on same truck Suitable compressor 1500 cfm /400 psi, 1200 cfm/ 350 psi 1200 cfm/ 330 psi. PRD Max Drill 6 ½ to 14 dia upto 600 mtrs Pull up force 18,635 kgf Pull down force 12,635 kgf Top head rotary drive 606kgs - mtr torque, rpm Optional 6 x 6 high pressure hydraulic driven Duplex double acting mud pump on board Suitable compressor 1200 cfm / 350 psi.

4 Water Well Drilling Rigs PRD Speed Star 6 ½ to 12 dia upto 363 mtrs Pull up force 9,200 kgf Pull down force 6,320 kgf Top head rotary drive 303kgs - mtr torque, rpm Optional 6 x 6 or 5 x 4 1/2 high pressure hydraulic driven Duplex double acting mud pump on board Suitable compressor 1100 cfm/ 300 psi PRD to 10 dia upto 180 mtrs Pull up force 5,500 kgf Pull down force 2,600 kgf Top head rotary drive 225kgs - mtr torque, 0-90 rpm Optional 5 x 4 1/2 high pressure hydraulic driven mud pump (or) Engine driven centrifugal mud pump Suitable compressor 600 cfm/ 200 psi PRD to 8 dia upto 150 mtrs Pull up force 4,300 kgf Pull down force 2,900 kgf Top head rotary drive 150kgs - mtr torque, 0-90 rpm Engine driven centrifugal mud pump on board Optional 5 x 4 1/2 high pressure engine driven centrifugal mud pump on board Suitable compressor 600 cfm/ 200 psi, 540cfm /185 psi

5 Water Well Drilling Rigs PRD 500 T 4 ½ to 8 dia upto 200 mtrs Pull up force 5,042 kgf Pull down force 3,090 kgf Top head rotary drive 160kgs - mtr torque, 0-80 rpm Engine driven centrifugal pump on separate skid Suitable compressor 600 cfm/ 200 psi PRD Hydraulic Pnematic 450 Portable Drilling Rig DTH cum Rotary Drilling Rig Nominal drilling capacity 150 mtr of 4 ½" bore 3 " OD drill rods Engine driven centrifugal pump on trolley Pull Up force 3000 Kgs Pull Down force 2000 Kgs Top Head Rotary drive of 140 Kg mtr torque 0-25 RPM Pull Up force 3000 Kgs Pull Down force 3000 Kgs Top Head Rotary drive of 114 Kg mtr torque 0-70 RPM Rotary head motor: 6 HP Feed motor: 8 HP PRD DR 2000 Direct Rotary Normal drilling capacity 6", 8", 10" ft 12¼" ft 17¼" ft Hoisting capacity - 40,000 Kgs Mast Length 12 mtr rod handling 9mtr Max Torque -750 Kg -mtr Max Rotary Speed RPM Deck Engine -260 HP Engine driven Duplex Double Acting high Pressure mud pump 10 "x7"

6 Exploration Rigs PRD Mini Core Drill Truck /Track mounted core drilling rig NQ 200 mtrs 3 mtr rod handling mast,rod retrival 6 mtr Pull Up Force 5,000 Kgs Pull Down Force 3,800 Kgs 45 Degree angle drilling option Hydraulic foot clamp 2 speed drill head 3 ton main winch 1 Ton wire line with 250 mtr wire rope High Pressure water Pump PRD Silver Core Drill Truck /Track mounted Core drilling rig NQ 1200 mtrs 6 mtr rod handling mast Pull Up Force 13,700 Kgf Pull Down Force 7,000 Kgf Angle Dump mast for 45 degree drilling Hydraulic foot clamp 4 speed drill head with hydraulic clutch AMC 11 high pressure water pump 10 Ton main winch 2 Ton wire line with 1200 mtr wire rope

7 Exploration Rigs PRD Multi Star Truck /Track mounted Core Cum Reverse Circulation drilling rig 750 mtr of NQ Core /300 mtr Rc/500 mtr DTH 30 Ton heavy duty mast Pull Up Force 21,500 Kgf Pull Down Force 14,500 Kgf 2 speed drilling head RPM Torque range Kg -mtr Suitable compressor 1200 cfm/ 350 psi, 1500 cfm /400 psi Cummins 6 CTA deck Engine Dual Dump mast for 45 Degree angle drilling 30 Ton heavy duty track PRD Gold RC Drill Rig Truck /Track mounted RC drilling rig Reverse Circulation drilling upto -200 mtr 5 mtr rod handling mast Pull Up Force 10,750 Kgf Pull Down Force 7,250 Kgf Dual Dump mast for 45 degree angle drilling Cyclone attachment with sample splitter On Board compressor 1200 cfm /350 psi Optional attachment for Booster

8 Blast Hole Rigs PRD Blast Hole Rig Drilling Capacity mm- 200 mm DTH method upto -30 mtr Mounted on heavy duty track frame Mast to Handle 7.6 mtr drill rods Hydraulic Motor chain drive feed Rotary Head with 300 kg at Torque RPM On board compressor 900 cfm / 350 psi Option of twin cyclone dry type dust control system Centralized air conditioned Control Cabin PRD Drill Max HC 500 M Hole Diameter mm (31/2"-5") Drill -Dia 76mm(3") Drill Rod Length 3,050 mm (10 ft) Drill Depth upto 15m (50 ft) Weight 4,750 kg Height 2,250 mm Length 5,500 mm Width 2,150 mm Ground Clearance 280 mm Rotation Torque 1765 Nm Rotation Rpm 0-50 rpm Pull Up / Down Force 1500 Kg (14.7 Kn) Tramming Speed 2.5 km/hr PRD EX 65 Hole Diameter mm-165 mm Drill Depth - 20 mtr max Rod Handling Capacity - 6 mtr single pass Pull up/down Force kg / 2500 kg Pull up/ Down Speed - 80 mtr / min Rotation RPM - 0 to 100 RPM Rotation Torque - 300kg-mtr Suitable Compressor cfm-200 psi 1100 cfm- 300 psi Optional Attachments - Dust Collector, Water Injection, Hands Free Rod Changing System

9 Special Purpose Equipments PRD Tractor Mounted Drill Rig Pile drilling 1200 mm dia upto - 30 mtrs (water assisted) DTH Cum Rotary Drilling 200 mtrs,6 "hole Tractor Capacity - 75 HP 4x4 Max Pull Up / Pull Down Capacity :7900/ 5400 Kgs Max Rotary Head Torque 400 Kg -mtr Max Rotary Head Speed -0 to 80 RPM Optional attachments -RC drilling, Core drilling PRD Pole Drill DTH drilling 1000mm dia upto 15 mtrs Max Pull Up Capacity :20,000 Kgs Max Rotary Head Torque 1200 Kg -mtr Max Rotary Head Speed -0 to 50 RPM Deck Engine 160 HP On Board cfm /600 psi Compressor (twin compressor)

10 Well Installation & Maintenance PRD Test Pumping Unit Boom Capacity :12 ton Max.vertical reach : 9800mm Max.horizontal reach :1000 mm Genset unit : 40 kva Winch Capacity 5 ton Rope diameter :16 mm Max.speed :30mtr/min PRD Giraffe Pump Installation Unit Boom Capacity :10 ton Max.vertical reach : 7200mm Max.horizontal reach :1000 mm Genset unit : 20 kva Winch Capacity 3 ton Rope diameter :12 mm Max.speed :50mtr /min

11 DTH Tools DOWN THE HOLE ROCK DRILLING TOOLS We are a leader in design, manufacture, servicing and repair of Down-the -Hole (DTH) percussive rock drilling products. We offer market s most comprehensive range of DTH hammers and button bits. DTH product solutions for water well, mining and as well as for contractors in construction. Our DTH products include : Down the Hole hammers (2-12 inches diameter) Down the Hole Button bits (2-24 inches ) Down the Hole over burden drilling systems (4 3/4-12 inches).

12 Manufacturing Unit PARANTHAMAN EXPORTERS Plot No : M8, SIPCOT SEZ for Engineering products, Perundurai Tamilnadu.India Mob : Website : Happy Drilling Forever With PRD RIGS

NEW ROCKPEN 300 DRILL RIGS VARIOUS STANDARD MODELS AND CUSTOM UNITS FABRICATED TO CUSTOMERS CHOICE

NEW ROCKPEN 300 DRILL RIGS VARIOUS STANDARD MODELS AND CUSTOM UNITS FABRICATED TO CUSTOMERS CHOICE Drillers Mecca cc t/a Drilling Enterprises & Compressors Wesbank Approved Supplier Mobile: 083 655 2267 Office: 079 546 7132 Fax: 086 684 1621 E-mail: piet@drillmecca.com Website: www.drillmecca.com Factory

More information

Accessories: Dust collector. Slope winch. Bit grinder Application: Water wells

Accessories: Dust collector. Slope winch. Bit grinder Application: Water wells Deltabase 430 - DTH drill rig Deltabase 430 - DTH drill rig Deltabase 430 is a compact, lightweight drill rig especially designed for DTH work on modern job sites. The DB 430 is optimised to drill 4 to

More information

RC DRILLING DEPTH GUIDELINES DRILL ROD / CORE BARREL. Hole Depth METRIC. Hole Depth U.S. 4 (101,6 mm) 700 m ft. 4-1/2 (114,3 mm) 600 m 1.

RC DRILLING DEPTH GUIDELINES DRILL ROD / CORE BARREL. Hole Depth METRIC. Hole Depth U.S. 4 (101,6 mm) 700 m ft. 4-1/2 (114,3 mm) 600 m 1. Drilling depth capacity s are based on feedback from field operatives and can be reasonably expected with vertical, water filled holes, by well-trained drilling crew using high quality drilling tools.

More information

TOTAL SOLUTION FOR DRILLING

TOTAL SOLUTION FOR DRILLING TOTAL SOLUTION FOR DRILLING FROM DURGA TRACTORS 19,20 GIDC KALOL, GUJARAT, INDIA-382721 AN ISO 9001:2008 COMPANY Company Profile. Durga Tractors is the leading Name in drilling rig and tractor loaders

More information

DANDO MULTITEC 4000 MK3

DANDO MULTITEC 4000 MK3 DANDO MULTITEC 4000 MK3 Multipurpose Drilling Rig WWW.DANDO.CO.UK Multitec 4000 Features 4 speed rotary head mounted to a hydraulic side shift with optional floating spindle. Hydraulic head tilt available.

More information

Dando Drilling International

Dando Drilling International Dando Drilling International Dando Terrier and Tooling The Dando Terrier drilling rig has been designed specifically for sampling and testing for geotechnical and environmental analysis. The rig is crawler

More information

ECM-720 CM-760D CM-780D

ECM-720 CM-760D CM-780D Setting The Pace Hydraulic Crawler Drills ECM-720 CM-760D CM-780D HOLE QUALITY PENETRATION RATE ACCESSORY LIFE Tough Enough To Lead, Highest Quality Atlas Copco crawler drills are designed and manufactured

More information

LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved.

LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview. Copyright 2011 Boart Longyear. All rights reserved. LX 4 GEO-TECHNICAL DRILL (DB520) Technical Overview LX 4 GEO-TECHNICAL DRILL HIGH DRILLING POWER IN A SMALL PACKAGE, THE MULTIPURPOSE LX 4 IS AN ESSENTIAL TOOL ON TODAY'S JOB SITE Power and Versatility

More information

DRILLS. Caterpillar Performance Handbook Edition 44

DRILLS. Caterpillar Performance Handbook Edition 44 DRILLS Caterpillar Performance Handbook Edition 44 800.47.4228 www.hawthornecat.com 2014 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, BUILT FOR IT, their respective logos, Caterpillar Yellow, the

More information

Copyright 2012 Boart Longyear. All Rights Reserved. LX 11 MULTIPURPOSE DRILL. Technical Overview

Copyright 2012 Boart Longyear. All Rights Reserved. LX 11 MULTIPURPOSE DRILL. Technical Overview Copyright 2012 Boart Longyear. All Rights Reserved. LX 11 MULTIPURPOSE DRILL Technical Overview 1 LX 11 Copyright 2012 Boart Longyear. All Rights Reserved. The LX11 is a powerful medium-sized exploration

More information

Christensen CT20. Surface core drill rig for mineral exploration

Christensen CT20. Surface core drill rig for mineral exploration Christensen CT20 Surface core drill rig for mineral exploration MODERN DEEP HOLE DRILLING Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck mounted or crawler mounted,

More information

MODULAR SHACK MOUNTED DRILL RIG VD5000M

MODULAR SHACK MOUNTED DRILL RIG VD5000M MODULAR SHACK MOUNTED DRILL RIG VD5000M STANDARD TECHNICAL SPECIFICATIONS Model Type VD5000M Skid mounted, open shack, all hydraulic chuck drive core drill, specially designed for diamond core drilling

More information

D90KS and 1190E blasthole drills

D90KS and 1190E blasthole drills D90KS and 1190E blasthole drills Sandvik is a high-technology engineering group with world-leading positions in selected areas tools for metal working, advanced materials technology, and mining and construction.

More information

RD20/RD20XC/APL DRILL RIGS. Oil and Gas Drilling atlascopco.com/rd20

RD20/RD20XC/APL DRILL RIGS. Oil and Gas Drilling atlascopco.com/rd20 RD20/RD20XC/APL DRILL RIGS Oil and Gas Drilling atlascopco.com/rd20 THE INDUSTRY STANDARD Approximately 300 RD20 s operating worldwide have earned a reputation for reliability, strength and drilling performance.

More information

(800) TOLL FREE ORDER LINE 2910 Schoeneck Road Macungie, PA SEPTEMBER 2015 SALE FLYER

(800) TOLL FREE ORDER LINE 2910 Schoeneck Road Macungie, PA SEPTEMBER 2015 SALE FLYER Prices subject to change without notice. Freight extra unless otherwise noted. Financing available. (800) 346-7805 TOLL FREE ORDER LINE SEPTEMBER 2015 SALE FLYER PREFER TO RECEIVE OUR MONTHLY SALE FLYERS

More information

Excavator-mounted drill rigs

Excavator-mounted drill rigs Excavator-mounted drill rigs ADVANCED DRILLING TECHNOLOGY Turning insurmountable obstacles into temporary This is between you and the rock. Man against the toughest surface nature can provide. Finding

More information

WALKING PAD TELEMAST RIG

WALKING PAD TELEMAST RIG WALKING PAD TELEMAST RIG The Dawn of a New Era Power To Go, Faster With over a decade of proven reliability and more than 200 patented Telemast rigs in operation around the world today, a new era begins

More information

DeltaBase 102 Technical Data Sheet

DeltaBase 102 Technical Data Sheet Release Date: Sept 16th 2008 Page 1 of 6 PRODUCT OVERVIEW The DeltaBase 102 Anchor drill rig for double-head drilling systems, rotary / percussion operations is specially designed for the following key

More information

Blast hole drilling rigs - SBM series

Blast hole drilling rigs - SBM series Blast hole drilling rigs - SBM series Nordmeyer SMAG SBM Series Blast Hole Drilling Rigs: modern, efficient, powerful, reliable. SBM Drilling Rigs represent cost-effective drilling using both rotary drilling

More information

MD6250. Rotary Blasthole Drill Specifications 11.2 or 13.6 m (36.7 or 44.6 ft) Mast Configurations. Basic Specs

MD6250. Rotary Blasthole Drill Specifications 11.2 or 13.6 m (36.7 or 44.6 ft) Mast Configurations. Basic Specs MD6250 Rotary Blasthole Drill Specifications 11.2 or 13.6 m (36.7 or 44.6 ft) Mast Configurations Description The MD6250 crawler-mounted blasthole drill is designed to drill from 152-250 mm (6-9.8 in)

More information

SOILMEC FAR EAST PTE.LTD SOILMEC ARABIA LLC

SOILMEC FAR EAST PTE.LTD SOILMEC ARABIA LLC Microdrilling Microdrilling EQUIPMENT / TECHNOLOGIES PSM-8 PSM-8B PSM-8G STM-8G SM-14 PSM-16G STM-16G MICROPILES ANCHORINGS JET GROUTING OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT OPTIONAL KIT

More information

Drilling Profits Portable air power

Drilling Profits Portable air power Drilling Profits Portable air power Elgi, established in 1960, designs and manufactures a wide range of compressors. The company has gained its reputation for design and manufacture of screw compressors

More information

HDD ASSIST OVERCOMING DIFFICULT SITUATIONS

HDD ASSIST OVERCOMING DIFFICULT SITUATIONS HDD ASSIST OVERCOMING DIFFICULT SITUATIONS Presented by: Venue: Amanda Kitchin Business Development Trenchless Technology UKSTT Roadshow Reading ABOUT US Mammoth Equipment Ltd and MTS Suction Systems UK

More information

EWS Resources - Plant &Equipment

EWS Resources - Plant &Equipment ABN: 48 608 947 548 EWS Resources - Plant &Equipment Table of Contents 1 PILE DRIVING... 2 1.1 Pile Driving Barge MH6176 (Dunnit)... 2 1.2 Pile Driving Barge MH6054 (Gunna)... 3 1.3 Pile Driving Barge

More information

SANDVIK DT922i THE ULTIMATE ALL-ROUNDER

SANDVIK DT922i THE ULTIMATE ALL-ROUNDER SANDVIK DT922i THE ULTIMATE ALL-ROUNDER SEE THE BIG PICTURE At Sandvik, we have worked with drilling solutions for more than 50 years creating cutting-edge technology to serve you with the best solution

More information

A PIONEER IN PILE DRIVING

A PIONEER IN PILE DRIVING A PIONEER IN PILE DRIVING Junttan has 40 years experience in developing and manufacturing the industry s leading piling equipment. During this time, we have established a solid position as the recognised

More information

Surface Miner. T1460 Surface Miner T1760 Surface Miner

Surface Miner. T1460 Surface Miner T1760 Surface Miner T1460 T1760 The Greener Choice over Blasting Greatly reduced noise & dust pollution Eliminates the need for drilling & blasting with dangerous explosives Productive alternative when in proximity to populated

More information

EK90 GEAX MULTI-PURPOSE DRILLING RIG

EK90 GEAX MULTI-PURPOSE DRILLING RIG www.geax.it EK90 EK90 is a multi-purpose drilling machine designed to reach the highest grade of versatility, ease of use, easy transportation, working speed and low maintenance. It can work with different

More information

SmartROC T35 & T40 Surface drill rigs for quarrying and construction

SmartROC T35 & T40 Surface drill rigs for quarrying and construction SmartROC T35 & T40 Surface drill rigs for quarrying and construction SmartROC T35 hole diameter: 64 115 mm (2.5" 4.5") SmartROC T40 hole diameter: 76 127 mm (3" 5") World champion of fuel efficiency SmartROC

More information

T50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6

T50. Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: mm / 4 6 powerroc T50 Surface drill rig for limestone and cement quarrying, open pit mining, and aggregate quarrying. Hole diameter: 102 152mm / 4 6 trustful performer with striking efficiency Everything about

More information

Dando Drilling International

Dando Drilling International Dando Drilling International Dando Terrier MK2 The new compact, versatile Dando Terrier MK2 has been designed specifically for sampling and testing for site investigation and environmental analysis. Crawler

More information

Secoroc Rock Drilling Tools LARGE DTH SOLUTIONS

Secoroc Rock Drilling Tools LARGE DTH SOLUTIONS Secoroc Rock Drilling Tools LARGE DTH SOLUTIONS secoroc Cluster drills The Cluster drill Range With the need for larger diameters in the foundations market worldwide we have adapted our Cluster drill packages

More information

KESHO RAM SONI & SONS

KESHO RAM SONI & SONS KESHO RAM SONI & SONS SINCE 1969 With quality as our forte, we have been supplying a wide range of Drilling, Mining and other Industrial Equipment and Tools to our reputed clients from variegated industry

More information

Piling rig with fixed leader system LRH 600 LRH

Piling rig with fixed leader system LRH 600 LRH Piling rig with fixed leader system LRH 6 EN LRH 18.3 Concept and characteristics LRH 6 Special features Dimensions and weights LRH 6 fixed leader 9.5 14 3 3 5 52625 5 515 Max. 15 6695 12 8 Min. 62 R 698

More information

Atlas Copco Blasthole T4BH series

Atlas Copco Blasthole T4BH series Atlas Copco Blasthole T4BH series Drills DTH and Rotary drilling Multi pass Holediameter 5 %in 97/8 in (143 251 mm) Maximum hole depth for 25 ft tower: 147 ft (45 m) Maximum hole depth for 30 ft tower:

More information

COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 6 SPECIFICATIONS BROCHURE

COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 6 SPECIFICATIONS BROCHURE COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 6 SPECIFICATIONS BROCHURE HIGHLIGHTS Name: Discovery 6 Brand Loadcraft Power: 550 HP Year: 2013 Double Drum: Drawworks and Sandline Drums : Self-propelled Land

More information

HANDY MAXIDRILL. Drilling Unit::

HANDY MAXIDRILL. Drilling Unit:: Handy Maxidrill is a hydraulic drilling mobile unit, totally independent, and suitable for vertical drilling on any inclined and in any type of rock. Handy Maxidrill is made up by a drilling unit placed

More information

chain sprocket SIMPLEX DUPLEX TRIPLEX

chain sprocket SIMPLEX DUPLEX TRIPLEX chain sprocket SIMPLEX DUPLEX TRIPLEX CHAIN SPROCKET DRIVE The Transmission of mechanical power without slippage and with a high degree of maintained efficiency is a basic function of the Roller Chain

More information

FLEXIROC T30 R. Construction Edition. Hole diameter: mm (1 3/4 3 1/2 )

FLEXIROC T30 R. Construction Edition. Hole diameter: mm (1 3/4 3 1/2 ) FLEXIROC T30 R Construction Edition Hole diameter: 45 89 mm (1 3/4 3 1/2 ) EXTEND YOUR RECH ND VERSTILITY THE FLEXIROC T30 R CONSTRUCTION EDITION IS TOPHMMER RIG DESIGNED FOR WIDE RNGE OF DRILLING PPLICTIONS.

More information

44. Bit record form Rig site daily drilling report form Office drilling report Computerized drilling information network

44. Bit record form Rig site daily drilling report form Office drilling report Computerized drilling information network Figures v Tables vii Foreword ix Acknowledgments xi Units of Measurement xii Introduction 1 Well Planning 5 Bits 9 Bit Selection 9 Bit Design 11 How Bits Drill 12 Roller Cone Bits 13 Natural Diamond Bits

More information

MD6420. Rotary Blasthole Drill. 10 Meter Mast Configuration Rotary Drive System. Compressor (Standard) Operating Temperature

MD6420. Rotary Blasthole Drill. 10 Meter Mast Configuration Rotary Drive System. Compressor (Standard) Operating Temperature MD6420 Rotary Blasthole Drill 10 Meter Mast Configuration Rotary Drive System Hole diameter Up to 311 mm Up to 12.25 in Torque 0-15 185 N m 0-11, 200 lbf-ft Depth single pass Up to 10.29 m Up to 33 ft

More information

Excavator-mounted rock drills. more holes less costs easier than ever

Excavator-mounted rock drills. more holes less costs easier than ever Excavator-mounted rock drills more holes less costs easier than ever The AutoDrill system makes the drilling process easy and effective All ExcaDrill units are equipped with the AutoDrill automatic drilling

More information

AERIAL LIFTS 19' Skyjack SJIII3219 Indoor Scissor Lift 20' Electric Indoor Scissor Lift Genie Rough Terrain Scissor Lift 45' Genie Articulating Manlift AIR EQUIPMENT / COMPRESSORS 185cfm Air Compressor

More information

Pneumatic crawler drill

Pneumatic crawler drill 27 / 28 Pneumatic crawler drill CRAWLER ASSEMBLY The crawler uses parts designed and time tested by Furukawa. These include the track-link crawler chains and track rollers. The ruggedly constructed crawler

More information

GEOTHERMAL WELL DRILLING COSTING A CASE STUDY OF MENENGAI GEOTHERMAL FIELD

GEOTHERMAL WELL DRILLING COSTING A CASE STUDY OF MENENGAI GEOTHERMAL FIELD Presented at SDG Short Course I on Exploration and Development of Geothermal Resources, organized by UNU-GTP, GDC and KenGen, at Lake Bogoria and Lake Naivasha, Kenya, Nov. 10-31, 2016. Kenya Electricity

More information

Drilling Rig LB enus LB

Drilling Rig LB enus LB Drilling Rig LB 24-27 enus LB 23.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment

More information

SCORPION DC, LLC Rig 1 Sky Top 4 Axle Carrier 6500 Drilling Depth

SCORPION DC, LLC Rig 1 Sky Top 4 Axle Carrier 6500 Drilling Depth SCORPION DC, LLC Rig 1 Sky Top 4 Axle Carrier 6500 Drilling Depth Series 60 Detroit Diesel Engine Allison 5860 Transmission (1) 125 KW Generator (1) 75 KW Generator Sky Top 4210 (470HP) 1 Drill Line 95

More information

STOPEMATE ROCK DRILL Rock Drill and Blast Rig Technical Overview

STOPEMATE ROCK DRILL Rock Drill and Blast Rig Technical Overview Copyright 2011. All rights reserved. STOPEMATE ROCK DRILL Rock Drill and Blast Rig Technical Overview Copyright 2011. All rights reserved. STOPEMATE The StopeMate TM Production Drill is unique by design

More information

Cyclone Manufacturing Sandblast and Abrasive Blast Equipment Manufacturing. SandBlasters, Dust Collector, and Specialty Equipment

Cyclone Manufacturing Sandblast and Abrasive Blast Equipment Manufacturing. SandBlasters, Dust Collector, and Specialty Equipment Cyclone Manufacturing Sandblast and Abrasive Blast Equipment Manufacturing. SandBlasters, Dust Collector, and Specialty Equipment Our Top Selling Models PK-36 Top & Side Door Opening Blast Cabinet 6035

More information

ATTACHMENT E: CONSTRUCTION EQUIPMENT SUMMARY

ATTACHMENT E: CONSTRUCTION EQUIPMENT SUMMARY ATTACHMENT E: CONSTRUCTION EQUIPMENT SUMMARY Equipment Use Improve Access Roads (per mile) Bulldozer Grade access roads 1 4 10 Road Grader Grade access roads 1 4 10 Loader Load haul trucks, transport materials

More information

+91-8048079302 Gamzen Plast Private Limited http://www.gamzenmachines.com/ Our Company is a well-known & popular manufacturer, exporter and wholesaler of machines & equipment such as the concrete mixtures,

More information

The drilling- and sounding rig RSB 0/ 1.4 is suitable für soil investigation according to DIN 4021 table 3, sub 1 and 2 as listed below: I:] I:J

The drilling- and sounding rig RSB 0/ 1.4 is suitable für soil investigation according to DIN 4021 table 3, sub 1 and 2 as listed below: I:] I:J The drilling- and sounding rig RSB 0/ 1.4 is suitable für soil investigation according to DIN 4021 table 3, sub 1 and 2 as listed below: I:] I:J Soil sampling for soil mechanics, investigating construction

More information

Boomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2

Boomer M2 Battery. Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Effectively powered the Boomer M2 Battery is a battery powered face drill rig with zero emissions for coverage areas up to 65 m 2 Boomer M2 Battery Cutting costs and boosting productivity

More information

Secoroc Rock Drilling Tools COP 66 DTH HAMMER. Taking blasthole drilling to a new dimension

Secoroc Rock Drilling Tools COP 66 DTH HAMMER. Taking blasthole drilling to a new dimension Secoroc Rock Drilling Tools COP 66 DTH HAMMER Taking blasthole drilling to a new dimension THE COP 66: FASTER, LIGHTER, SHORTER and built on success The new COP 66 and its new platform design represent

More information

Atlas Copco Blasthole Drills DM-M3

Atlas Copco Blasthole Drills DM-M3 Atlas Copco Blasthole Drills DM-M3 It all starts with the blasthole... and the blasthole starts with the DM-M3 power and performance. A unique patented feed system: Longer head travel with smaller cylinder

More information

DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY MODEL LP-12 NSN

DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY MODEL LP-12 NSN TM 5-3820-256-24-6 TECHNICAL MANUAL UNIT, INTERMEDIATE DIRECT SUPPORT AND INTERMEDIATE GENERAL SUPPORT MAINTENANCE MANUAL DRILLING SYSTEM, WELL, ROTARY, TRUCK MOUNTED, AIR TRANSPORTABLE, 600 FEET CAPACITY

More information

TEMPEST 100 VH. Drilling equipment:

TEMPEST 100 VH. Drilling equipment: TEMPEST 100VH is a hydraulic block cutter electrically powered studied for the bank vertical and horizontal drilling. The principal feature of TEMPEST 100VH is, certainly, the presence of an electrical

More information

JCB FASTRAC 2155/2170

JCB FASTRAC 2155/2170 ABS BRAKING FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB SMOOTHSHIFT TRANSMISSION. C A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 m (ft-in) A Height to cab 2.88 (9-5) B

More information

Sandvik DP series Unleash the power

Sandvik DP series Unleash the power Sandvik DP series Unleash the power Proven productivity Rock-steady power. For the toughest drilling jobs Are you looking for a drill with the power and control to handle the toughest conditions in a mine

More information

750HP PORTABLE DRILLING RIG W/ WALKING SYSTEM

750HP PORTABLE DRILLING RIG W/ WALKING SYSTEM 750HP PORTABLE DRILLING RIG W/ WALKING SYSTEM PAGE 1 OF 7 DRAWWORKS: TSM 7000 Drawworks, 750hp, grooved f/1-1/8 Drill Line, p/b 540HP CAT C-15, w/allison CLT- 6061 Automatic Transmission, Right Angle Drive,

More information

LM 75 UNDERGROUND CORING DRILL. Technical Overview. Copyright 2018 Boart Longyear. All rights reserved.

LM 75 UNDERGROUND CORING DRILL. Technical Overview. Copyright 2018 Boart Longyear. All rights reserved. LM 75 UNDERGROUND CORING DRILL Technical Overview Copyright 2018 Boart Longyear. All rights reserved. Copyright 2018 Boart Longyear. All rights reserved. "Q" is a trademark of Boart Longyear LM 75 UNDERGROUND

More information

Technical data Hydraulic crawler crane HS 875 HD

Technical data Hydraulic crawler crane HS 875 HD Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight

More information

Piling Rig LRH 100 LRH

Piling Rig LRH 100 LRH Piling Rig LRH 1 EN LRH 31.5 Concept and characteristics LRH 1 Dimension and weights LRH 1 18.4 18.4 18.4 18.4 19 1998-243 6 45 875 368 R 376 9 44 545 Technical data Total height 19.98-24.3 m Max. pile

More information

Technical data Piling rig LRH 100

Technical data Piling rig LRH 100 Technical data Piling rig LRH 1 Concept and characteristics Leader top for auxiliary rope Leader top Hydraulic hammer Auxiliary rope Leader Rope guide Leader ball joint Radius adjustment device Boom Pile

More information

Auction Ring 1 -Ramp - North Auction Theatre

Auction Ring 1 -Ramp - North Auction Theatre Edmonton, AB, CAN - Oct 24, 2017 - Index Summary All times listed are approximate. Day 1 - Tuesday October 24 2017 Auction Ring 1 -Ramp - North Auction Auction Ring Auction Ring 1 -Ramp - North Auction

More information

Industrial Lifting Equipment

Industrial Lifting Equipment Industrial Lifting Equipment Safety Reliability Efficiency Expertise Lifting ir Winches LIFTSTR Portable Winches - Reliable and Safe Lightweight and compact design Versatile Easy to carry. Robust steel

More information

Winch & Hoist. Markets and Applications Overview. Safety Reliability Efficiency Expertise Service

Winch & Hoist. Markets and Applications Overview. Safety Reliability Efficiency Expertise Service Winch & Hoist Markets and Applications Overview Safety Reliability Efficiency Expertise Service Winch & Hoist Industrial Air Hoist Range: 0.25 to 2 ton capacity SAFETY RELIABILITY EFFICIENCY EXPERTISE

More information

Technical data Hydraulic crawler crane HS 895 HD

Technical data Hydraulic crawler crane HS 895 HD Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating

More information

RIGS LOADCRAFT INDUSTRIES, LTD. WORKOVER. drawworks PARTS/SERVICE. mud systems (80 0 ) L O A D C R A F T I N D U S T R I E S, LT D.

RIGS LOADCRAFT INDUSTRIES, LTD. WORKOVER. drawworks PARTS/SERVICE. mud systems (80 0 ) L O A D C R A F T I N D U S T R I E S, LT D. LOADCRAFT INDUSTRIES, LTD. WE BUILD RIGS. L O A D C R A F T I N D U S T R I E S, LT D. RIGS drawworks WORKOVER mud systems PARTS/SERVICE (80 0 ) 8 0 3-018 3 3811 N. BRIDGE B R A D Y, T E X A S 7 6 8 2

More information

Precision Air Drilling Services Equipment Information & Specifications

Precision Air Drilling Services Equipment Information & Specifications Equipment Information & Specifications Joy Super Booster Specifications Joy WB-12 5000 Specifications Page 2 of 10 Table of Contents Joy Super Booster Specifications... 2 Joy WB-12 5000 Specifications...

More information

SPECIFICATION OF ZJ40/2250LDB DRILLING RIG

SPECIFICATION OF ZJ40/2250LDB DRILLING RIG SPECIFICATION OF ZJ40/2250LDB DRILLING RIG SECTION CATEGORY A HOISTING EQUIPMENT B ROTARY EQUIPMENT C PUMPING AND HIGH PRESSURE DISCHARGE SYSTEM D LOW PRESSURE MUD SYSTEM E PRIME MOVERS / TRANSMISSION

More information

Rotary Drilling Co. Ltd. Presentation

Rotary Drilling Co. Ltd. Presentation Rotary Drilling Co. Ltd. Presentation Geographical distribution of services A. jelszavak kezelése HSE performance in line with industry benchmark. *Statistics are counted according to IADC. HSE performance

More information

RENTAL PRICE LIST. Fast Moving Items CURRENT HOURS: For items not listed, call

RENTAL PRICE LIST. Fast Moving Items CURRENT HOURS: For items not listed, call Fast Moving Items RENTAL PRICE LIST For items not listed, call 330-724-2100 www.gauerrental.com 676 E. Waterloo Rd Akron Toll Free: 1-866-212-8888 330-724-2100 CURRENT HOURS: Monday-Friday 7:30am - 4:30pm

More information

Secoroc Rock Drilling Tools DTH equipment

Secoroc Rock Drilling Tools DTH equipment Secoroc Rock Drilling Tools DTH equipment Product catalogue 770-483-0788 Contents Guide to product codes...5 7 Bit shanks... 8 Drill bits... 9 23 Hammers...24 27 Reverse circulation...28 29 Economy kits...30

More information

STOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview

STOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview STOPEMASTER SERIES Rock Drill and Blast Rig Technical Overview Copyright 2011. All rights reserved. Copyright 2011. All rights reserved. For more information on the Stopemaster scan with a QR code reader

More information

Land Rigs. The core of drilling innovation

Land Rigs. The core of drilling innovation Land Rigs The core of drilling innovation Land Rigs 1 Land Rigs Series Drillmec s deep roots in the manufacturing of drilling rigs start back in 1929 and since then continuously improved rig design by

More information

About Us. Quality you demand experience and service to back it up.

About Us. Quality you demand experience and service to back it up. About Us Quality you demand experience and service to back it up. Keystone Drill Services, Inc. (formerly known as two separate entities Keystone Drill Services and Stockdale Mine Supply) have over 100

More information

Drilling Rig LB LB

Drilling Rig LB LB Drilling Rig LB 28-32 EN LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment

More information

Piling and drilling rig LRB

Piling and drilling rig LRB Piling and drilling rig LRB 355 54.5 Concept and characteristics LRB 355 Leader top adjustable incl. aux. winch 8 t Vertical travel device Leader. m Inclination device Attachment with quick connection

More information

Technical data Piling and drilling rig LRB 125

Technical data Piling and drilling rig LRB 125 Piling and drilling rig LRB 125 Concept and characteristics Leader top Auxiliary winch Leader Vertical travel device Tool with quick connection Inclination device Leader rotation device Parallel kinematics

More information

SR-50 LDP CFA BFS DP SR-50. Hydraulic Rotary Rig

SR-50 LDP CFA BFS DP SR-50. Hydraulic Rotary Rig SR-50 LDP CFA BFS DP Hydraulic Rotary Rig SR-50 Rotary Soilmec rotaries are designed and manufactured to meet the need for increased production and performance on various applications, with the added benefit

More information

HYDRAULIC WORKOVER SERVICES

HYDRAULIC WORKOVER SERVICES HYDRAULIC WORKOVER SERVICES Technology at work for you. Cudd Energy Services (CES) offers a diversified portfolio of solutions for today s well challenges. From a simple completion job to a complex well

More information

Megamarine Services Pte Ltd

Megamarine Services Pte Ltd Megamarine Services Pte Ltd Based in Singapore, Megamarine Services Pte Ltd is established by Mr. Chris Goh Ngak Eng in 2006, targeting to serve customer from Building & Construction, Marine & Offshore,

More information

Instructions for filling out the Equipment for Hire Registration Form (Other than Dump Trucks)

Instructions for filling out the Equipment for Hire Registration Form (Other than Dump Trucks) Instructions for filling out the Equipment for Hire Registration Form (Other than Dump Trucks) 1. Personal Info: Ensure your legal company name is on the form. 2. Equipment Info: Ensure you complete all

More information

24/ / / / Auger Boring Machines

24/ / / / Auger Boring Machines 24/30-150 36-600 42/48-600 48/54-900 60-1200 72-1200 84/96-1800 Auger Boring Machines Available in Sizes to Perform all your Underground Boring Needs Manufacturing the Latest in Auger Boring Technology

More information

BOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m²

BOOMER E1/E2 SERIES. Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² BOOMER E1/E2 SERIES Hydraulic face drilling rigs for medium to large drifts and tunnels with cross sections up to 112 m² FOR POWER AND PRODUCTIVITY THE BOOMER E1 AND BOOMER E2 RIGS HAVE EXTENSIVE COVERAGE

More information

Megamarine Services Pte Ltd

Megamarine Services Pte Ltd Megamarine Services Pte Ltd Based in Singapore, Megamarine Services Pte Ltd is established by Mr. Chris Goh Ngak Eng in 2006, targeting to serve customer from Building & Construction, Marine & Offshore,

More information

FEMA's Schedule of Equipment Rates

FEMA's Schedule of Equipment Rates DEPARTMENT OF HOMELAND SECURITY FEDERAL EMERGENCY MANAGEMENT AGENCY DISASTER ASSISTANCE DIRECTORATE PUBLIC ASSISTANCE DIVISION WASHINGTON, D.C. 20472 www.fema.gov/government/grant/pa/eqrates.shtm (May

More information

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment

model PROVISIONAL product guide features contents 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment features 200 mton (220 ton) capacity 865 m-ton (6,267 ft-kips) Maximum Load Moment 89 m (292') Heavy-Lift Boom 98,4 m (323') Fixed Jib on Heavy-Lift Boom 113,8 m (373') Luffing Jib on Heavy-Lift Boom 253

More information

TECHNO INDUSTRIES Material Handling Equipment Manufacturers

TECHNO INDUSTRIES Material Handling Equipment Manufacturers TECHNO INDUSTRIES Material Handling Equipment Manufacturers SINCE 1979 Tackle the load with TACKLERS About Techno Industries Established in the year 1979. TACKLERS brand Manufacturers, Suppliers & Exporters

More information

FASTRAC 3200/3230 XTRA

FASTRAC 3200/3230 XTRA ABS BRAKING FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB P-TRONIC TRANSMISSION. A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 495/70R24 A Height to exhaust 3.17 (10-5) 3.09

More information

Portable Compressors MOBILAIR M13-M270 With the world-renowned SIGMA PROFILE Free air delivery: 1.2 to 26.9 m³/min.

Portable Compressors MOBILAIR M13-M270 With the world-renowned SIGMA PROFILE Free air delivery: 1.2 to 26.9 m³/min. Portable Compressors MOBILAIR M13-M270 With the world-renowned SIGMA PROFILE Free air delivery: 1.2 to 26.9 www.hpccompressors.co.uk Made in Germany KAESER s renowned MOBILAIR range of portable compressors

More information

DH M-5 SPECIFICATION

DH M-5 SPECIFICATION SPEC.F5-5501E PHOENIX Series DH658-135M-5 Hydraulic Pile Driving Rig SPECIFICATION October, 2007 Nagoya, Japan Tel : 81- (52) - 623-3529 Fax: 81- (52) - 623-4349 Due to company policy of continuous development

More information

AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER

AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258

More information

2011 SUGGESTED RENTAL RATES FOR CONSTRUCTION EQUIPMENT

2011 SUGGESTED RENTAL RATES FOR CONSTRUCTION EQUIPMENT SUGGESTED RENTAL RATES FOR CONSTRUCTION EQUIPMENT FOREWARD This edition of the Nova Scotia Road Builders Association Suggested Schedule of Rental Rates for Construction Equipment is presented for the information

More information

P-62M / P-62L PNEUMATIC SUPPORT LEG

P-62M / P-62L PNEUMATIC SUPPORT LEG P-62M / P-62L PNEUMATIC SUPPORT LEG Pneumatic support leg P-62M / P-62L is used to increase performance and improve the comfort of working with a WUP-22 drilling machine. The support is intended to support

More information

Lotus. Water Well Products

Lotus. Water Well Products Lotus Water Well Products We are an export oriented business house engaged in manufacturing, distributors, exports and imports of Rock Drilling Tools and Equipments, all types of Construction Machinery

More information

Kelly bar type Earth Drilling Rig Bell pile technique

Kelly bar type Earth Drilling Rig Bell pile technique Excavated Bell pile Kelly bar type Earth Drilling Rig Bell pile technique NIPPON SHARYO, LTD 日本車両 This [Bell pile technique] which is able to increase the end-bearing capacity of the pile by enlarging

More information

Oil Rigs Now Houston, Texas

Oil Rigs Now Houston, Texas Oil Rigs Now Houston, Texas 713-570-6450 DRAWWORKS: SUPERIOR 1000M New (2006) Single Drum Drawworks, 1,000 Hp Lebus grooved for 1-1/4 Drilling Line, Air operated Makeup & Breakout Catheads, Over-Running

More information

COMPACT UTILITY EQUIPMENT

COMPACT UTILITY EQUIPMENT COMPACT UTILITY EQUIPMENT ATTACHMENTS COMPACT UTILITY ATTACHMENTS 1 Attachments are easy to operate with each machine s convenient, functional levers. 2 Quick-connect attachment plate on all mini skid

More information