Rotary Telescopic Handlers. Product Range

Transcription

1 Rotary Telescopic Handlers Product Range

2 Turn your world around with 360 rotation! n Rotate at will Bobcat offers a new level of versatility and efficiency with the range of rotating telescopic handlers. With 360 rotation, you can lift and precisely position big, bulky and heavy loads anywhere on your site. And with the full range of attachments, you obtain three machines in one: man platform, telescopic handler and crane. Our range will give you a whole new perspective of your site and spin your world around! Continuous rotation* Lift and rotate over obstacles Fast and precise positioning Accessibility: increase your scope on worksites *(except TR35160 at +/- 200 ) n Maximum safety for peace of mind Load control system for no risk of overloading Easy to read information on load weight, boom extension, type of attachment, turret position, etc Automatic recognition of attachment mode, with load chart for each Deadman switch to prevent uncontrolled movements n Efficiency of 3 machines in 1 Minimize worktime Maximize mobility and reach locations that an ordinary man platform or crane wouldn t Maximize safety while rotating Maximize lifting height versus a standard telescopic handler n Very user-friendly 2 joysticks similar to crane controls Easy to use load control system Proportional movements Easy to switch attachment modes Convenient attachment coupling

3 Boost your efficiency with features that do the job n Our range is loaded with features to help you maximize your efficiency: High-flow gear pump offers optimum power, precision and flexibility. Open-centre load sensing system and electroproportional valves let you raise and extend the boom while operating attachments, with proportional movements at any engine speed. Optimum load charts make sure you get best-in-class lifting capacity at any reach. eature: Large range of Fattachments. enefit: Highly versatile; Bpossibility to tackle a wide variety of jobs. eature: Large Fwindscreen (and sun visor). enefit: Excellent Battachment visibility for your high-reach work. eature: Rear axle locks Fduring rotation. enefit: Greater safety Bduring operation on tyres. eature: Frame Flevelling (except TR35160). enefit: Angle B+/- 8 for better handling on uneven ground and precise positioning. eature: Remote control. F enefit: Easily place loads Bprecisely in confined spaces. Operate the machine from outside the cab. eature: Stabilizers. F enefit: Greater safety and stability, Bthanks to levelling on uneven ground. All four stabilizers are independently controlled and include intermediate positions, for narrow streets or spaces and for avoiding obstacles. The wide contact area ensures adaptability to all surfaces. À The TR35160 is equipped with different stabilizers. À

4 n Man platform-ready Our range is ready for mounting man platforms. No additional options are required. n Hydrostatic transmission The easy-to-use, heavy-duty hydrostatic transmission allows accurate positioning for greater safety and precision, as well as continuous speed control. n Remote control open doors for more applications All the models in our range can be equipped with radio remote control. Get more done, by remote-controlled boom functions. n Travel speed Travel time is downtime for construction equipment. But our machines can move quickly from one job site to another, and are back to work in no time. n Exceptional manoeuvrability Whatever your working environment, there is a steering mode to suit your requirement: 1. Front-wheel steering for road travel; gets you to your next site quickly. 2. All-wheel steering gives you better on-site handling and a smaller turning radius, for sharp turns in small and narrow spaces. 3. Crab steering lets you position loads to the side with perfect precision in cramped areas. PERFORMANCE Lifting height (on tyres) Lifting height (on stabilizers) Rated capacity Capacity at maximum height (on tyres) Capacity at maximum height (on stabilizers) Capacity at maximum reach (on tyres) Capacity at maximum reach (on stabilizers) Maximum reach (on tyres) Maximum reach (on stabilizers) Levelling corrector WEIGHTS Weight (unladen) ENGINE Make / Model Fuel / Cooling Rated power Maximum torque at 1400 RPM Number of cylinders Displacement TRACTION Standard tyres Low speed (forward/reverse) High speed (forward/reverse) drive SySTEM Transmission Main drive HydRAULIC SySTEM Pump type Combined pump capacity Working pressure BRAkES Engine braking Emergency brake Parking brake Service brake dimensions Overall width Overall length (with carriage) Overall height Ground clearance Wheelbase Track width External turning radius (with forks) Internal turning radius Rotation

5 TR35160 TR45190 TR50210 TR40250 mm mm kg kg kg kg kg mm mm N/A +/- 8 +/- 8 +/- 8 kg Iveco NEF F4GE0454A-TC Perkins 1104D-ETA Perkins 1104D-ETA Perkins 1104D-ETA Diesel / Liquid Diesel / Liquid Diesel / Liquid Diesel / Liquid kw (HP) 74 (102) 106 (144) 106 (144) 106 (144) Nm l /70/20" 18-R22.5" 18-R22.5" 18-R22.5" km/h km/h Hydrostatic with hydraulic regulation Hydrostatic with hydraulic regulation Hydrostatic with hydraulic regulation Hydrostatic with hydraulic regulation 2 speed gearbox 2 speed gearbox 2 speed gearbox 2 speed gearbox Single gear pump Double gear pump Double gear pump Double gear pump l/min bar Hydrostatic Hydrostatic Hydrostatic Hydrostatic mm mm mm mm mm mm mm mm /

6 Three machines in one: numerous possibilities! n Versatility: the capability to do more The range offers the chance to do so much more on your site, with attachments that make it a three-in-one solution. Attach one of our man platforms and use it as an aerial work platform. Use it with pallet forks or buckets, and it s a telescopic handler. Add a winch or jib, and it becomes a crane The possibilities are nearly endless! A MAN PLATFORM 3 A TELESCOPIC HANDLER 2 A CRANE 1 ROTATING MAN PLATFORM (EXPANdABLE TO 4.2 M 300 kg) This rotating platform accommodates up to 3 persons at one time and 300 kg of load. It extends hydraulically within seconds from 2.40 m up to 4.20 m. Set up is quick and its rotation (up to 90 ) makes it easy to adjust the platform to the worksite! HydRAULIC WINCH + EXTENSION JIB Raise and lower loads without moving the boom! A range of extension jibs with winches are available with proportional control system for precise load positioning. PALLET FORkS Use to lift, carry and place all kinds of pallet materials on uneven surfaces in industrial or construction areas. Forks have a standard length of 1200 mm. Capacity ranges vrom 3.8 t to 5.0 t. ROTATING MAN PLATFORM (EXPANdABLE TO 5.8 M 300 kg) This large rotating platform can expand from 2.40 m up to 5.80 m within seconds. It accommodates up to 3 persons at one time and 300 kg of load. The set up is quick and easy. The large width makes the platform convenient for all aerial work where space is required. EXTENSION JIB WITH HOOk Use this handy attachment to position loads in places that are otherwise difficult to access. The jib equipped with a hook increases lifting height and forward reach. Jibs have a capacity of 0.6 t, 1.2 t or 2.0 t and a reach varying from 1.3 m, to 2.5 m and 4.5 m. LIGHT MATERIAL BUCkET Boost productivity using large capacity buckets for light material handling (with load weight no higher than 0.8 t/m³). Choose among four heaped capacities available: 0.75 m³, 1 m³, 1.5 m³ and 2 m³. ROTATING MAN PLATFORM (EXPANdABLE TO 4.2 M 800 kg) Expand hydraulically this rotating man platform from 2.40 m up to 4.20 m within seconds. Designed to accommodate up to 3 people, with a maximum load capacity of 800 kg. This model is particularly useful where high load capacity is required at high reach. Other configurations available. HydRAULIC WINCH (WITH CABLE GUIdE) Choose from a 3.8 t or 5.0 t hydraulic winch to raise and lower loads without moving the boom. The double pull and cable guide increase performance and smooth operation. A version without cable guide can also be selected. MIXING BUCkET This rugged, cost-effective attachment lets you mix, transport and pour concrete or other mixes more quickly than a stand-alone mixer (capacity of 500 l). FIXEd MAN PLATFORM (120X kg) This fixed platform accommodates up to 3 persons at one time and 300 kg of load. It extends hydraulically within seconds from 1.20 m up to 2.15 m. Set up is quick and easy. Other configurations available. HOOk Add a hook and turn your rotary telescopic handler into a cost efficient and easy to use crane with all the mobility and versatility of a standard crane. The use of the hook increases the working scope considerably. CONCRETE BUCkET Two different buckets (400 l and 600 l) allow you to put concrete fast and efficiently where you want it. A hydraulic opening system makes it easy to empty the bucket.

7 Comfort at its best with fingertip control n Ergonomic design for comfortable operation all day long Designed to be productive but also very comfortable for a full day of work in the best conditions Large cab interior offers plenty of legroom Spacious glazed cab offering excellent panoramic visibility for more ease and safety n Simple and logical control Easy to use, multifunctional, proportional joystick for fast and precise positioning of the boom Second joystick for independent rotation of the turret available as an option n Maximize uptime, with easy maintenance Easy access to the main components (engine, hydraulic system, boom, etc) Quick and effortless routine servicing n The service you trust, from the dealer you know Our well-developed dealer network has the knowledge and experience to take the best care of our Bobcat customers. No matter where you are, you ll get the service you expect and can rely on!