HYDRAULIC QUICK HITCH

Size: px
Start display at page:

Download "HYDRAULIC QUICK HITCH"

Transcription

1 HYDRAULIC QUICK HITCH Installation & Operation Manual Important: This manual must be kept with the excavator at all times and referred to as required Harford Attachments Ltd

2 Table of Contents Introduction Harford Uni-Lok quick hitch for excavators Page 2 Introduction Safety features Page 2 Installation Fitting the quick hitch to the excavator Page 3 Installation Fitting the hydraulic components Page 4 Installation Fitting the electrical components Page 6 Safe Operation Connecting an attachment Page 7 Safe Operation Releasing an attachment Page 9 Safe Operation Lifting a Load Page 9 Maintenance Daily checks Page 10 Warranty Earthmoving attachment Page 11 Item Checklist Hydraulic Uni-Lok quick hitch Page 11 Appendix 1 Hydraulic and Electrical circuit Page 12 Appendix 2 EC Declaration of Conformity Page 13 If at any time in the future, you require additional information on the HARFORD UNI-LOK quick hitch or any aspects of its use, please do not hesitate to contact: Harford Attachments Ltd Spar Road, Norwich. NR6 6BY. England Tel +44 (0) Fax +44 (0) info@harfordattachments.co.uk website:

3 Introduction Harford Uni-Lok quick hitch for excavators Thank you for choosing to purchase the Harford Uni-Lok quick hitch for excavators. The information contained in this manual should be thoroughly read and understood by all operators of this quick hitch. The Uni-Lok is a double-locking automatic quick hitch designed to pick up attachments manufactured to the OEM specification. The rear sliding wedge plate provides the primary locking device. Due to the large number of excavator makes and models available worldwide, it is not possible to provide a rigid set of installation instructions that will cover every situation. It is, therefore, extremely important that the installation be carried out by properly skilled persons, preferably with past quick hitch installation experience. It is essential that the operation and maintenance instructions are followed carefully to ensure safe and reliable operation of the quick hitch at all times. Failure to do so could result in serious injury and invalidate warranties. This manual contains the installation and operation instructions for the Uni-Lok quick hitch. If the quick hitch you are about to fit or operate is not the Uni-Lok, please refer to the separate manual. Safety Features There are several safety features that are incorporated into this quick hitch. Each feature further removes the possibility of the attachment unintentionally becoming disengaged. 1. Pilot operated check valve. This is incorporated into the double acting hydraulic cylinder. The attachment should remain locked due to a loss of hydraulic pressure. 2. Sprung loaded rear lock. This ensures that a force is still maintained on the rear locking wedge due to a loss of hydraulic pressure. 3. Rear lock indicator bar. This allows the operator to check that the rear locking wedge is in its correct operating position. This is visible from the cab. 4. Sprung loaded front lock. This ensures that the front pin is secure when connecting an attachment and during operation. This is visible from the cab. 5. Dual switching arrangement. The primary switch is a locked off type to secure against inadvertent activation. The secondary switch is a momentary type so that the attachment can only be released when it is pressed. 2

4 Installation Fitting the quick hitch to the excavator SAFETY NOTICE: It is recommended that safety gloves are worn during the installation of the quick hitch. 1. Remove any existing attachment from the machine dipper arm and crowd link arm. The two original pins that are removed from these pivot points must be used to attach the quick hitch to the excavator (These pins are usually hardened and have greasing facilities). 2. Carefully align the dipper arm between the two front bosses on the hitch as shown by diagram 1. Replace any O rings that were removed previously and slide one of the original pins through the quick hitch and dipper arm. Securely fix the pin in place by using the original or supplied retention method. 3. Repeat step 2 with the crowd link arm linkage. 4. Grease the two pins and visually check that they are located and secured correctly. 5. Use the excavator hydraulics to carefully rotate the quick hitch to the extremes of the crowd cylinder (e.g. no stroke and full stroke). Check the clearance of the quick hitch with any part of the dipper arm and linkage. 6. Fit the supplied yellow warning sticker in the cab in a prominent position. Also supplied are three safety pin not required stickers one to be fitted in the cab in a prominent position and one each side of the dipper arm near to the quick hitch. 7. Medium tensile pins (or better) should be used in both pin location holes of the attachment. Visually check to ensure the pins are correctly fitted and are secure before the attachment is used. Ensure any retention bolts are tightened using double nuts to lock against each other. Diagram 1 3

5 Installation Fitting the hydraulic components. To install this quick hitch requires a solenoid valve, pressure switch, hoses and fittings. The Harford fitting kit consists of these components. This quick hitch has been designed to operate at the excavator s maximum working pressure. If this is more than the hydraulic cylinders maximum pressure (stamped on top) a pressure reducing valve must be fitted. All components must be the correct specification and be installed by skilled and suitably experienced persons. Before doing any welding and work on the electrics of the machine, ensure that battery has been disconnected to prevent damage to the machine circuit. Manifold block 1. The excavator geometry will determine where the manifold block should be placed 2. It should be welded as low down the dipper arm as possible on either the top or sides as shown by the photos below. 3. Ensure it is positioned so that when the hoses are fitted they are not too long, overstretched or impeded by the quick hitch or links during operation. 1. Fit P-Clips & spiral wrap as shown below. 2. Ensure that the hoses are not overstretched. P Clips 4

6 Installation Solenoid Valve Ensure that the solenoid valve is not energised when the quick hitch is in the locked position. This will ensure the coil will not burn out and will also ensure that in the event of an electrical failure, the quick hitch will stay in the locked position. 1. Ensure that you about to fit the correct Solenoid valve. For cylinders rated 3500 and 4000 PSI fit the Delta Solenoid valve and the cylinder rated at 5000 PSI fit the Hydac Solenoid valve. 2. Position solenoid valve in a safe, dry area close to the hydraulic pump, or main valve assembly. 3. The solenoid valve must be connected to the main pressure line of the excavator between the pump and main control valve. It is recommended that the main test port is used. 4. Ensure fixing bolts are tightened. Pressure Switch This switch has been factory set so that it operates when the pressure reaches 150 bar (2175 psi) but it can be adjusted between bar ( psi). 1. Ensure that the pressure switch is fitted into the bucket extend line. Hydraulic hoses Hydraulic oil pressure and fluid can cause serious personal injury. When escaping under pressure it can penetrate body tissue, cause severe tissue damage, loss of limb and possible death. Always check for leaks with the use of a shield and not against any part of your skin. Alternatively shut off the pressure and allow time to de-pressurize. If fluid is injected into your skin you must seek emergency treatment straight away by medical personnel that have knowledge of this kind of injury. Remember some hydraulic fluids are also flammable. Refer to relevant COSHH data sheets for substances that you may come into contact with. 1. Ensure all hydraulic components are suitable for the working pressure. 2. The hydraulic components must be piped according to the relevant circuit as shown on appendix Weld pipe clamps to the excavator arms to retain hose at appropriate positions, hydraulic hoses should follow the paths of existing hydraulic lines of the excavator. Disconnect the negative/earth lead from the battery prior to any welding operation. Remove paint from the weld area prior to welding and use anti-spatter to protect the arm. Protect hydraulic rams and any existing hoses from weld spatter. 4. Cut and fit hose protector where applicable especially where hoses attach to the hydraulic cylinder on the hitch. 5. Hydraulic hoses should be long enough to accomplish their intended function whilst ensuring that during operation the minimum bend radius stated by the hose manufacturer is adhered to. Allowance should be also made for changing characteristics of the hose under differing operating conditions. 6. Avoid contamination within the hydraulic circuit. 5

7 Installation 7. If hoses are not pre-assembled ensure any assembly follows hose manufacturers recommendations. 8. Do not re-use old or damaged hose or fittings. If fittings come off during use, do not re-attach but replace the whole hose assembly. 9. Do not mix hydraulic hose and adaptors from different manufacturers and ensure all fittings used are compatible. 10. Ensure all connections are tightened to correct torque e.g. 1/4 BSP = 18Nm, 3/8 BSP = 31Nm. 11. Ensure any spillages are cleaned up. The Harford hydraulic kit supplied conforms to EN 853-2SN. All hoses must be crimped by competent persons using the correct tooling. Further information can be obtained from Harford Attachments. Fitting the electrical components To install this hitch requires a solenoid valve, pressure switch, relay, dual switch arrangement, warning buzzer, appropriate wiring and fuse. Our fitting kit consists of these components. All components must be the correct specification for the excavator and be installed by skilled and suitably experienced persons. Electrical wiring/switching 1. Ensure all electrical components are the correct voltage for the excavator. 2. The electrical components must be wired according to the switch circuit as shown on appendix The switches should be positioned in the cab within easy reach of the operator but not in a position so they can be inadvertently operated. 4. Ensure the warning buzzer is placed in a position so that it can be heard. 6

8 Safe Operation IMPORTANT This quick hitch is operated by a dual switch arrangement. A primary on/off lockable switch and a secondary momentary type. Connecting an attachment 1 Activate the primary switch. to sound the warning buzzer and energise the secondary switch. 2 Fully extend the bucket cylinder and maintain operation of the control stick to ensure the pump works at full pressure as shown in diagram 2. 3 Press and release the secondary switch to retract the rear locking wedge and open the front lock. 4 Lower the Quick hitch front C shaped jaw down towards the front attachment pin ensuring the front lock is in the open position. 5 Engage the front jaw with the front attachment pin as shown by diagram 3. 6 Lift the attachment of the ground and then extend the bucket cylinder as shown in diagram 4. 7 De-activate the primary switch to extend the rear locking wedge and close the front lock. The warning buzzer will turn off. 8 Retract the bucket cylinder slowly to view the indicator bar and front lock to ensure correct operating positions as shown by diagram 5. Conduct rattle test to confirm full engagement of the rear locking wedge. Diagram 2 - Extend the bucket cylinder Diagram 3 - Engage the front jaw Diagram 4 Lift the attachment and then extend the bucket ram 7

9 Safe Operation Diagram 5 Correct operating position Incorrect operating position Incorrect operating position 8

10 Safe Operation During operation there should be no movement between the quick hitch and attachment. If any movement is detected, stop operation immediately, lower attachment to the ground and inspect the hitch. The quick hitch extends the length of the dipper arm and some attachments could hit the cab or boom in certain positions. The quick hitch is designed to accept attachments which are manufactured to OEM specifications and capacities. Oversized attachments could be hazardous when used with this quick hitch and could invalidate any warranties. Ensure the Safe Working Load of the excavator is not exceeded. Refer to the excavator manufacturer s information. If hammers are to be used for long periods of time the quick hitch should be removed to prevent unnecessary wear. Releasing an attachment 1 Ensure people and property are well clear of the immediate area. 2 Activate the primary switch to sound the warning buzzer and energize the secondary switch. 3 Extend the bucket cylinder fully and maintain operation of the control stick to ensure full pressure. 4 Press and release the secondary switch to open the front lock and retract the rear locking wedge. 5 When the front lock is fully open carefully retract the bucket cylinder to disengage the attachment from the Quick hitch. Use the control sticks to position the dipper and boom to ensure the attachment doesn t fall to the ground. 6 De-activate the primary on/off switch to turn off the warning buzzer. 7 The Quick hitch is now ready to connect another attachment. Lifting a load This section only applies to quick hitches that are manufactured with a lifting eye. 1. Ensure that the load to be lifted does not exceed the safe working load of the lifting eye. 2. The lifting eye is designed to be used with a lifting shackle with the same safe working load rating. 3. Release the attachment from the quick hitch prior to using it to lift load. Ensure the safe lifting capacity of the excavator is not exceeded. Refer to excavator manufacturer s information. 9

11 Maintenance Hydraulic oil pressure and fluid can cause serious personal injury. When escaping under pressure can penetrate body tissue, cause severe tissue damage, loss of limb and possible death. Always check for leaks with the use of a shield and not against any part of your skin. If fluid is injected into your skin you must seek emergency treatment straight away by medical personnel that have knowledge of this kind of injury. Remember some hydraulic fluids are also flammable. Refer to relevant COSHH data sheets for substances that you may come into contact with. SAFETY NOTICE: It is recommended that safety gloves are worn during the maintenance of the quick hitch. Daily checks: 1. Clean away any material build up around the front lock, cylinder, springs and wedge. 2. Grease wedge slide housing points 3. Check all pin retainers bolts & nuts for tightness on quick hitch and attachments 4. Check hydraulic hoses for damage, leakage or weeping, stiffness (as hose ages it can become stiff causing it to crack when flexed), blistering and general wear. Replace as required. 5. Check hose fittings at connection points for leaks, poor interfacing with hose or other connectors. Tighten and replace as required 6. Check quick hitch operation by connecting an attachment. 7. Check operation of warning buzzer. 8. Check quick hitch for evidence of wear, fatigue or weld failure. Due to the self tightening and infinite wear feature accommodated with the hydraulic cylinder, if any attachment is fitted to the hitch for long periods of time it should be released daily. If the daily maintenance tasks are adhered to, this will happen automatically. If the quick hitch is damaged in any way and/or there is any doubt as to the continued safety please contact Harford Attachments Ltd, Technical Department on +44 (0)

12 Warranty Earthmoving attachment Harford Attachments Ltd (the seller) warrants their quick hitches as follows: 1. The seller shall repair or replace at the seller s option any of the goods which are, or which become, defective within 12 months from delivery due to faulty workmanship, materials or faulty design, provided that the buyer shall have notified the seller in writing of such defect and have given the seller a reasonable opportunity to inspect the defective goods. 2. If, in the opinion of the seller, the goods have not been operated or maintained in accordance with the instructions in this manual, or have been subject to unauthorised repair or modification, the warranty will be invalidated. 3. The seller s liability in respect of defects in the goods shall be limited to those stated in this clause and subject to Clause 2(1) of the Unfair Contract Terms Act 1997, the seller shall not be liable whether in contract or in tort, including but not limited to negligence, or by reason of breach of statutory duty or otherwise, for any damage or loss whatsoever suffered by the buyer arising out of or attributable to such defects. The following items are supplied. Item Checklist Item Hydraulic quick hitch Installation and operation manual Warning label Safety pin not required stickers Supplied Electrical fitting kit see note 1 Hydraulic fitting kit see note 1 Notes 1. The electrical and hydraulic kits are essential parts of the hydraulic quick hitch system but may not have been supplied by Harford Attachments Ltd. Harford Attachments Ltd Spar Road, Norwich. NR6 6BY. England Tel +44 (0) Fax +44 (0) info@harfordattachments.co.uk website: 11

13 Appendix 2 12

MECHANICAL QUICK HITCH

MECHANICAL QUICK HITCH MECHANICAL QUICK HITCH Installation & Operation Manual Important: This manual must be kept with the excavator at all times and referred to as required Harford Attachments Ltd Table of Contents Item Checklist

More information

HARFORD SAFELOCK MECHANICAL QUICK HITCH

HARFORD SAFELOCK MECHANICAL QUICK HITCH HARFORD SAFELOCK MECHANICAL QUICK HITCH Installation & Operation Manual Important: This manual must be kept with the excavator at all times and referred to as required Harford Attachments Ltd Table of

More information

THUMB OPERATIONS AND MAINTENANCE MANUAL

THUMB OPERATIONS AND MAINTENANCE MANUAL THUMB OPERATIONS AND MAINTENANCE MANUAL INTRODUCTION Thanks for choosing from JB Attachments range of earthmoving products. The contents of this manual should be thoroughly read and understood by the operators

More information

Table of Contents General Information Safety Message Classifi cation...2 Safety Notes...3 Terminology...4 Coupler Lifting Lug...

Table of Contents General Information Safety Message Classifi cation...2 Safety Notes...3 Terminology...4 Coupler Lifting Lug... Table of Contents General Information Safety Message Classifi cation...2 Safety Notes...3 Terminology...4 Coupler Lifting Lug...6 Assembly and Installation General Information...7 How it works...7 Component

More information

INSTALLATION AND OPERATION MANUAL

INSTALLATION AND OPERATION MANUAL INSTALLATION AND OPERATION MANUAL Dual-Lock + Coupler SERIAL NUMBER: The Dual-Lock+ Coupler (Fully Automatic with Dual Pin Locking) International Patents pending Release 1.2, July 2014 Reference SA612060

More information

INSTALLATION MANUAL - v4

INSTALLATION MANUAL - v4 I-LOCKTM COUPLER INSTALLATION MANUAL - v4 SPECIAL NOTE Your new Wedgelock Coupler fitted with the I-LOCK TM Safety Device requires the installation of a third hydraulic line - please follow the instructions

More information

Snaplock+ Quick Coupler Installation and Operation manual

Snaplock+ Quick Coupler Installation and Operation manual Snaplock+ Quick Coupler Installation and Operation manual The Snaplock+ Coupler (Fully Automatic with Dual Pin Locking) International Patents pending Release 1.1, January 2014 Reference SA612060 IMPORTANT:

More information

Miller Compact Manual Quick Couplers

Miller Compact Manual Quick Couplers Miller: Issue 2 Miller Compact Manual Quick Couplers For Mini Excavators (1 to 10 tonne) and Backhoe Loaders Installation Guide and Operator s Instructions IMPORTANT Keep this manual with the machine at

More information

LOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List

LOG CHOP. Hydraulic Wood Guillotine. Owners Illustrated Instruction Book & Parts List LOG CHOP Hydraulic Wood Guillotine Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk

More information

Dual-Lock+ Coupler Installation and Operation manual

Dual-Lock+ Coupler Installation and Operation manual Dual-Lock+ Coupler Installation and Operation manual SERIAL NUMBER: The Dual-Lock+ Coupler (Fully Automatic with Dual Pin Locking) International Patents pending Release 1.2, July 2014 Reference SA612060

More information

CT-930 MANUAL HYDRAULIC COMPRESSION TOOL TABLE OF CONTENTS

CT-930 MANUAL HYDRAULIC COMPRESSION TOOL TABLE OF CONTENTS PA25202A01 Rev. 01 5-2012 MANUAL HYDRAULIC COMPRESSION TOOL Panduit Corp. 2012 TABLE OF CONTENTS SYSTEM SPECIFICATIONS... 1 OPTIONAL ACCESSORIES... 1 PRECAUTIONS AND GENERAL GUIDELINES... 2 DIE SELECTION...

More information

3.25 Ton Heavy Duty Floor Jack

3.25 Ton Heavy Duty Floor Jack Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

Release 1.2. HDT Tilt Hitch Installation & Operation Manual. Snaplock Tilt Quick Coupler

Release 1.2. HDT Tilt Hitch Installation & Operation Manual. Snaplock Tilt Quick Coupler Release 1.2 Snaplock Tilt Quick Coupler HDT Tilt Hitch Installation & Operation Manual REVISION 1.1 DATE 20 JULY 2011 Doherty Engineered Attachments Ltd 12 Cherokee Place Mount Maunganui New Zealand Phone

More information

Toll-free: 800 CASCADE ( ) Telephone: NORTH AMERICA

Toll-free: 800 CASCADE ( ) Telephone: NORTH AMERICA NORTH AMERICA Toll-free: 800 CASCADE (227.2233) Telephone: 503-669-6257 cascadewedgelock@cascorp.com PLEASE READ INSTALL MANUAL THOROUGHLY BEFORE INSTALLATION 1 2 3 4 5 6 7 8 9 10 11 12 13 Remove Bucket

More information

Instruction Manual. Single Acting Hydraulic Aluminium Pull Cylinders RAP Series. Maximum Operating Pressure 700 bar

Instruction Manual. Single Acting Hydraulic Aluminium Pull Cylinders RAP Series. Maximum Operating Pressure 700 bar Single Acting Hydraulic Aluminium Pull Cylinders RAP Series Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au

More information

SPH214 Small Panel Handler

SPH214 Small Panel Handler Thomson Engineering Design Ltd SPH214 Small Panel Handler Operator s Instructions Original Document in English Language Issue 2 November 2015 Copyright: Thomson Engineering Design Ltd all rights reserved

More information

Operation and Safety Manual

Operation and Safety Manual Barrel Handler Operation and Safety Manual EZ SPOT UR Inc. 803 25 th St. N Fargo, ND 58102 Toll Free: 877 433 5733 Phone: 701 282 2772 Fax: 701 277 4625 Table of Contents Safety Symbols & Equipment Signs...

More information

ABSOLUTE EQUIPMENT PTY LTD

ABSOLUTE EQUIPMENT PTY LTD Manual Hydraulic Toe Jack Model DTJ Series ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au Phone: +61 7 3865 4006 Fax: +61 7 3102 6288 This is

More information

DELHOIST DOUBLE ACTING TELESCOPIC CYLINDERS Stoney Rise Road (P.O. Box 20), Devonport, Tasmania 7310

DELHOIST DOUBLE ACTING TELESCOPIC CYLINDERS Stoney Rise Road (P.O. Box 20), Devonport, Tasmania 7310 DELHOIST DOUBLE ACTING TELESCOPIC CYLINDERS 171-199 Stoney Rise Road (P.O. Box 20), Devonport, Tasmania 7310 Ph. (03) 6424 5711 Fax. (03) 6424 6983 E-mail sales@dh.au.com Internet: www.dh.au.com - CONTENTS

More information

ABSOLUTE EQUIPMENT PTY LTD

ABSOLUTE EQUIPMENT PTY LTD Manual Hydraulic Toe Jack Model DTJ Series ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au Phone: +61 7 3865 4006 Fax: +61 7 3102 6288 This is

More information

Instruction Manual. Single Acting, Pancake, Locking Collar Hydraulic Cylinders RPLC Series. Maximum Operating Pressure 700 bar

Instruction Manual. Single Acting, Pancake, Locking Collar Hydraulic Cylinders RPLC Series. Maximum Operating Pressure 700 bar Single Acting, Pancake, Locking Collar Hydraulic Cylinders RPLC Series Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au

More information

Instruction Manual. Double Acting Hydraulic, Hollow Piston Cylinders RHD Series. Maximum Operating Pressure 700 bar

Instruction Manual. Double Acting Hydraulic, Hollow Piston Cylinders RHD Series. Maximum Operating Pressure 700 bar Double Acting Hydraulic, Hollow Piston Cylinders RHD Series Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au

More information

OPERATION MANUAL FOR SQUARE DRIVE & LOW PROFILE HYDRAULIC TORQUE WRENCHES NOTICE WARNING

OPERATION MANUAL FOR SQUARE DRIVE & LOW PROFILE HYDRAULIC TORQUE WRENCHES NOTICE WARNING OPERATION MANUAL FOR SQUARE DRIVE & LOW PROFILE HYDRAULIC TORQUE WRENCHES NOTICE Hydraulic Torque Wrenches are designed for installing and removing large bolts having minimal wrench clearance at offshore

More information

3 Ton Trolley Jack. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.

3 Ton Trolley Jack. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

Installation and User Manual

Installation and User Manual Hill Engineering Limited Unit 6 Carnbane Business Park Newry BT35 6QH Northern Ireland Tel +44(0)28 3025 2555 Fax +44(0)28 3026 4020 www.hillattach.com Installation and User Manual This manual must be

More information

Instruction Manual. Single Acting, Aluminium, Locking Collar Hydraulic Cylinders ARSLC Series. Maximum Operating Pressure 700 bar

Instruction Manual. Single Acting, Aluminium, Locking Collar Hydraulic Cylinders ARSLC Series. Maximum Operating Pressure 700 bar Single Acting, Aluminium, Locking Collar Hydraulic Cylinders ARSLC Series Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au

More information

Instruction Manual. Maximum Operating Pressure 510 bar

Instruction Manual. Maximum Operating Pressure 510 bar Single Speed Diesel Power Unit Model HPD11 Maximum Operating Pressure 510 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au Phone: +61 7 3865

More information

Instruction Manual. Single Acting, High Tonnage, Low Height Cylinders RSH Series. Maximum Operating Pressure 700 bar

Instruction Manual. Single Acting, High Tonnage, Low Height Cylinders RSH Series. Maximum Operating Pressure 700 bar Single Acting, High Tonnage, Low Height Cylinders RSH Series Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au

More information

LIFTWATCH 5 RATED CAPACITY INDICATOR

LIFTWATCH 5 RATED CAPACITY INDICATOR Prolec Ltd., 25 Benson Road, Nuffield Industrial Estate, Poole, Dorset, England BH17 0GB LIFTWATCH 5 RATED CAPACITY INDICATOR Operators Guide This guide describes operation of the PROLEC LIFTWATCH 5 RATED

More information

PosiGrab Hydraulic Coupler. Installation and Operation Instructions

PosiGrab Hydraulic Coupler. Installation and Operation Instructions PosiGrab Hydraulic Coupler Installation and Operation Instructions For PosiGrab Couplers Shipped Prior to April 15, 2015 Table of Contents PosiGrab Hydraulic Coupler Installation Instructions Installation

More information

Manifold w/ Needle Valve Instruction Manual

Manifold w/ Needle Valve Instruction Manual MODELS: MFC2 & MFC4 Manifold w/ Needle Valve Instruction Manual SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 - Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com

More information

2 Ton - 50 Ton Bottle Jack

2 Ton - 50 Ton Bottle Jack Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

Operator Instructions for Tension Links

Operator Instructions for Tension Links Operator Instructions for Tension Links Page 1 of 9 Table of Contents Introduction... 3 Markings CE... 3 Electromagnetic Compatibility (EMC)... 3 Tension Link Type/Model Number... 3 Supplier... 3 Service...

More information

POWER PINNER CD HAND WELDER 7300 OPERATOR S MANUAL

POWER PINNER CD HAND WELDER 7300 OPERATOR S MANUAL POWER PINNER CD HAND WELDER 7300 OPERATOR S MANUAL Copyright: April 7, 2014 Gripnail Corporation Revised: January 25, 2018 An Employee Owned Company 97 Dexter Road East Providence, Rhode Island 02914-2045

More information

VEHICLE POSITIONING JACK

VEHICLE POSITIONING JACK VEHICLE POSITIONING JACK Model No: VPJ300 PART NO: 7624100 OPERATING & MAINTENANCE INSTRUCTIONS GC06/12 INTRODUCTION Thank you for purchasing this CLARKE Vehicle Positioning Jack. Before attempting to

More information

MULTI-COUPLER OPERATIONS AND MAINTENANCE MANUAL

MULTI-COUPLER OPERATIONS AND MAINTENANCE MANUAL MULTI-COUPLER OPERATIONS AND MAINTENANCE MANUAL (P) PUBLISHED SEPTEMBER 2012 CONTENTS 1.0 INTRODUCTION 1.1 WARRANTY REGISTRATION 1.2 TO THE OWNER 2.0 SAFETY INSTRUCTIONS 2.1 JB ATTACHMENTS MULTI COUPLER

More information

Warranty Information Operators Manual Installation Instructions. Sudenga

Warranty Information Operators Manual Installation Instructions. Sudenga Warranty Information Operators Manual Installation Instructions Sudenga Rust Sales, Inc. 2964 164 th Ave SE Harwood, ND 58042 (800) 478-7801 (701) 282-9194 www.hopperwalker.com Limited Warranty Statement

More information

RAPID ROLLER OPERATOR S MANUAL. L&C ENTERPRISES - U.S.A, Inc N.75 Drive, Escanaba, MI OWNER S NAME MODEL

RAPID ROLLER OPERATOR S MANUAL. L&C ENTERPRISES - U.S.A, Inc N.75 Drive, Escanaba, MI OWNER S NAME MODEL RAPID ROLLER OPERATOR S MANUAL OWNER S NAME MODEL SERIAL NUMBER DATE OF PURCHASE L&C ENTERPRISES - U.S.A, Inc. 6652 N.75 Drive, Escanaba, MI 49829 906-786-1008 1-866-786-1009 LIMITED WARRANTY L&C Enterprises-USA,

More information

COUPLER. Operation Manual SPECIAL NOTE. Series THE WEDGELOCK I-LOCK COUPLER RANGE COMPLIES WITH AS

COUPLER. Operation Manual SPECIAL NOTE. Series THE WEDGELOCK I-LOCK COUPLER RANGE COMPLIES WITH AS TM COUPLER Operation Manual 902-002-12 Rev 1 TWO LINE DUAL SWITCH THE WEDGELOCK I-LOCK COUPLER RANGE COMPLIES WITH AS4772-2008 C2 Series SPECIAL NOTE Your new Wedgelock Coupler is fitted with the I-LOCK

More information

LOG SPLITTER. Heavy Duty PTO Driven. Owners Illustrated Instruction Book & Parts List

LOG SPLITTER. Heavy Duty PTO Driven. Owners Illustrated Instruction Book & Parts List LOG SPLITTER Heavy Duty PTO Driven Owners Illustrated Instruction Book & Parts List Grovebury Road, Leighton Buzzard, Bedfordshire. LU7 4UX. UK. Tel:01525 375157. Fax:01525 385222. Email: enquires@brownsagricultural.co.uk

More information

HYDRAULIC LEVELING SYSTEMS OPERATIONS MANUAL (For systems with touch pad part number , , , , or no number at all)

HYDRAULIC LEVELING SYSTEMS OPERATIONS MANUAL (For systems with touch pad part number , , , , or no number at all) HYDRAULIC LEVELING SYSTEMS OPERATIONS MANUAL (For systems with touch pad part number 500089, 500105, 500210, 500456, 500535 or no number at all) Visit us on the web at www.powergearus.com 82-L0040-01 Rev.

More information

Assembly instructions. Control System SS5. The noble art of digging. Version 1.0

Assembly instructions. Control System SS5. The noble art of digging. Version 1.0 Assembly instructions Control System SS5 The noble art of digging Version 1.0 Table of contents Safety instructions General information...4 Cautions...4 Symbols...6 Control 1. Checklist, electronics...7

More information

Power Float Manifold. Installation and Operations Manual Module 11A

Power Float Manifold. Installation and Operations Manual Module 11A Power Float Manifold Installation and Operations Manual Module 11A 2/14 Table of Contents 1 Features 3 2 Functional Purpose 3 3 4 Specifications System Installation 3 4 4.1 Hydraulic Connection 4 4.2 Electric

More information

1500 Series Roll Off Hoist. Owner s Manual (5-06)

1500 Series Roll Off Hoist. Owner s Manual (5-06) 1500 Series Roll Off Hoist Owner s Manual (5-06) Section 1: General Information Introduction Safety Information Warranty Information Table of Contents Section 2: Operation Operating the P.T.O. Operating

More information

Click Here for Printable PDF File. CHAPTER 3 - BASIC INFORMATION for PERFORMING HYDRAULIC SYSTEM MAINTENANCE

Click Here for Printable PDF File. CHAPTER 3 - BASIC INFORMATION for PERFORMING HYDRAULIC SYSTEM MAINTENANCE HWH Online Technical School Lesson 1: Introduction to Hydraulics Chapter 3 - "BASIC INFORMATION for PERFORMING HYDRAULIC SYSTEM MAINTENANCE" (Filename: ML57000-012-CH3.DOC Revised: 22APR16) Click Here

More information

OPERATORS MANUAL SAFETY & WARRANTY SECTION

OPERATORS MANUAL SAFETY & WARRANTY SECTION OPERATORS MANUAL SAFETY & WARRANTY SECTION KMW Ltd. 198 N. Hwy 281 Great Bend, Kansas 67530 800 445-7388 Fax 620 793-6737 ïïïkâãïäç~çéêëkåçã SAFETY FIRST This symbol, the industry s Safety Alert Symbol,

More information

HEAVY DUTY TROLLEY JACK. Operation Manual

HEAVY DUTY TROLLEY JACK. Operation Manual HEAVY DUTY TROLLEY JACK 4T Operation Manual Make sure to read and fully understand the instruction manual before using this product and keep the manual properly 1 General Description Product Description

More information

4200 & 6200 Owner s Manual & Parts Book

4200 & 6200 Owner s Manual & Parts Book 00 & 00 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model PN: - Dealer Date --0 Description Page To The Owner & Maintenance Safety Precautions & Torque Specifications Skid

More information

Operator s Manual. GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK

Operator s Manual. GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK Easy-Load Operator s Manual GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK Certificate of CE Conformity Date: 10 February 2003 Machine Model: Description: Easy-Load High Tipping Trailer Serial Number: I

More information

ADVANTAGE. The Workshops Main Street Garton-on-the-Wolds Driffield, YO25 3ET Tel: Fax:

ADVANTAGE. The Workshops Main Street Garton-on-the-Wolds Driffield, YO25 3ET Tel: Fax: 1 ADVANTAGE www.agriweld.co.uk The Workshops Main Street Garton-on-the-Wolds Driffield, YO25 3ET Tel: 01377 259140 Fax: 01377 259141 Email: sales@agriweld.co.uk 2 Contents Page 3 Page 4 Technical Information

More information

BOLT TENSIONERS. carefully before use and retain it for reference.

BOLT TENSIONERS. carefully before use and retain it for reference. BOLT TENSIONERS This manual contains IMPORTANT WARNINGS, CAUTIONS and other instructions. Read and understand the instructions manual carefully before use and retain it for reference. TORCUP MIDDLE EAST

More information

2 Speed Hydraulic Hand Pump

2 Speed Hydraulic Hand Pump Porto-Power Blackhawk Automotive is a licensed trademark 2 Speed Hydraulic Hand Pump Operating Instructions & Parts Manual B65122 B65421 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 816-891-6390

More information

8" - 12" Hydraulic Steel Squeeze Off Tool

8 - 12 Hydraulic Steel Squeeze Off Tool 8" - 12" Hydraulic Steel Squeeze Off Tool ECN 19130 C812S Hydraulic Steel Squeeze Off Tool for Steel Pipe Page 1 of 8 This Footage Tools C812S Steel Squeeze Off Tool is sold with one pump configuration

More information

Gauge Adapter Instruction Manual

Gauge Adapter Instruction Manual Instruction Manual MODELS: CF3812, CF3812E, CF3814 & CF4514 CF3812-M1_092017! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that

More information

CO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080

CO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080 CO 3-WAY PNEUMATIC VALVE INSTRUCTION MANUAL 2080 STI S.r.l has taken every care in collecting and verifying the documentation contained in this Instruction Manual. The information herein contained are

More information

Instruction Manual. Maximum Operating Pressure 700 bar

Instruction Manual. Maximum Operating Pressure 700 bar Remote Hydraulic Cutter Model HC-120R Maximum Operating Pressure 700 bar ABSOLUTE EQUIPMENT PTY LTD 2/186 Granite Street, GEEBUNG QLD 4034 Australia sales@absoluteequipment.com.au Phone: +61 7 3865 4006

More information

Clevis Plunger & Base Instruction Manual

Clevis Plunger & Base Instruction Manual MODELS: CED09 & CED16 SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 - Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com CED09-M0_102017 Clevis

More information

Operator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0

Operator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0 Operator s Manual Nitro 750 Nitro 750X Nitro 1000 Nitro 1000X September.27.2018REV0 Table of Contents Introduction...3 Safety.....4 Equipment Requirements......5 What You Have Received. 5 Serial Number...6

More information

MG12K24T60V4 Mechanical Grapple

MG12K24T60V4 Mechanical Grapple 170 State Route 271 Attachment Solutions MG12K24T60V4 Mechanical Grapple Operators Manual KENCO Mechanical Grapple Operation Manual 1 TABLE OF CONTENTS 170 State Route 271 Section I. General Information....

More information

OPERATOR MANUAL Chopper Hopper

OPERATOR MANUAL Chopper Hopper 1 OPERATOR MANUAL Chopper Hopper www.agriweld.co.uk The Workshops Main Street Garton-on-the-Wolds Driffield, YO25 3ET Tel: 01377 259140 Fax: 01377 259141 Email: sales@agriweld.co.uk 2 Contents Page 3 User

More information

Pressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -

Pressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings - Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural

More information

Hydraulics Troubleshooting

Hydraulics Troubleshooting Hydraulics Troubleshooting Hydraulic Power Units When there is a problem with a KTI Power Unit; from the pump tag we need the Model, Serial Number, Date and the last 6 digits of the trailer VIN#. An option

More information

Traileyre Bale Transporters. Models 1496 & Instruction Manual & Operating Guide

Traileyre Bale Transporters. Models 1496 & Instruction Manual & Operating Guide Traileyre Bale Transporters Models 1496 & 1498 Instruction Manual & Operating Guide EC Declaration of Conformity in accordance with BS EN ISO/IEC 17050-1:2004 David Ritchie (Implements) Ltd., Carseview

More information

Safe use of quick hitch devices on excavators. SIM 02/2007/01 Version 2. Target Audience: Construction Division Staff Construction Inspectors

Safe use of quick hitch devices on excavators. SIM 02/2007/01 Version 2. Target Audience: Construction Division Staff Construction Inspectors Safe use of quick hitch devices on excavators SIM 02/2007/01 Version 2 Target Audience: Construction Division Staff Construction Inspectors Date issued: 2007-06-27 Review date: 2011-06-27 OG Status: Fully

More information

MODEL 890 / 892 POWER POST 10 TON CAPACITY

MODEL 890 / 892 POWER POST 10 TON CAPACITY MODEL 890 / 892 POWER POST 10 TON CAPACITY Jackco Transnational Inc. LIMITED ONE YEAR WARRANTY Jackco Transnational Inc. warrants all Jackco equipment and tools to the original purchaser against any manufacturing

More information

OPERATOR MANUAL SUBSOILER

OPERATOR MANUAL SUBSOILER OPERATOR MANUAL SUBSOILER www.agriweld.co.uk The Workshops Main Street Garton-on-the-Wolds Driffield, YO5 3ET Tel: 01377 59140 Fax: 01377 59141 Email: sales@agriweld.co.uk Contents Page 3 Page 4 Page 5

More information

Elgin Hydraulic Clutch-Brake ECB-240, Product Number FORM NO. L F FORM NO. L F-0704

Elgin Hydraulic Clutch-Brake ECB-240, Product Number FORM NO. L F FORM NO. L F-0704 Elgin Hydraulic Clutch-Brake ECB-20, Product Number 96225 FORM NO. L-20283-F-070 1 FORM NO. L-20283-F-070 In accordance with Nexen s established policy of constant product improvement, the specifications

More information

Instruction Manual PC104/PC105 3-PHASE SOCKET TESTER. Check out what else you can get from Martindale:

Instruction Manual PC104/PC105 3-PHASE SOCKET TESTER. Check out what else you can get from Martindale: Check out what else you can get from Martindale: 17th Edition Testers Accessories Calibration Equipment Continuity Testers Electricians Kits Environmental Products Full Calibration & Repair Service Fuse

More information

Assisted Steering Hydraulic Installation Manual for Vehicle Kit Number Fits Only AGCO Gleaner R62/R65 (after S/N 66000) and R72/R75 (after

Assisted Steering Hydraulic Installation Manual for Vehicle Kit Number Fits Only AGCO Gleaner R62/R65 (after S/N 66000) and R72/R75 (after F i e l d p i l o t U s e r M A N U A L Assisted Steering Hydraulic Installation Manual for Vehicle Kit Number 91-02340 Fits Only AGCO Gleaner R62/R65 (after S/N 66000) and R72/R75 (after S/N 76000) Combines

More information

CONTENTS: SPECIFICATIONS 5712BT - 12 TON BENCH TOP HYDRAULIC SHOP PRESS OWNER'S MANUAL

CONTENTS: SPECIFICATIONS 5712BT - 12 TON BENCH TOP HYDRAULIC SHOP PRESS OWNER'S MANUAL OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Warning Information 3 Assembly and Operating Instructions 4 Preventative Maintenance and Warranty Information 5 Exploded View Drawing and Parts List SPECIFICATIONS

More information

PHASERS. Operating and Instruction Manual. a n d A C C E S S O R I E S

PHASERS. Operating and Instruction Manual. a n d A C C E S S O R I E S VOLTMETERS PHASERS a n d A C C E S S O R I E S Operating and Instruction Manual HD ELECTRIC COMPANY 1 4 7 5 L A K E S I D E D R I V E WA U K E G A N, I L L I N O I S 6 0 0 8 5 U. S. A. PHONE 847.473.4980

More information

OPERATOR INSTRUCTIONS

OPERATOR INSTRUCTIONS AUTOLOCK QUICK HITCH The Claw Owner & Operator must read and be fully aware & familiar with all safety instructions contained in this booklet OPERATOR INSTRUCTIONS PT. NO. 00065004 C CONTENTS PAGE SECTION

More information

CPCS renewal test factsheet

CPCS renewal test factsheet CPCS renewal test factsheet Introduction to the CPCS renewal test The industry-led CPCS Management Committee has determined that key safety-related knowledge must be checked on each category prior to the

More information

Instruction Sheet. 1/2 HP Portable Electric Pumps SAFETY FIRST. L2062 Rev. F 02/ IMPORTANT RECEIVING INSTRUCTIONS 2.

Instruction Sheet. 1/2 HP Portable Electric Pumps SAFETY FIRST. L2062 Rev. F 02/ IMPORTANT RECEIVING INSTRUCTIONS 2. Instruction Sheet 1/2 HP Portable Electric Pumps L2062 Rev. F 02/12 Index: English:...................................... 1-7 Français:.................................... 8-14 Deutsch:...................................

More information

INSTRUCTION MANUAL FOR THE THERMOCOUPLE ATTACHMENT UNIT (TAU)

INSTRUCTION MANUAL FOR THE THERMOCOUPLE ATTACHMENT UNIT (TAU) INSTRUCTION MANUAL FOR THE THERMOCOUPLE ATTACHMENT UNIT (TAU) Model Number: 41756 (100 125Vac) 41757 (220 240Vac) Manufactured in the United Kingdom CONTENTS Chapter Page Specification 3 What the TAU does

More information

24-48 HP250II Butterfly Valve. Operation and Maintenance Manual. Job Name: Contractor: Date: Document #: 2448HP250OOOM Revision Date: 1/10/11

24-48 HP250II Butterfly Valve. Operation and Maintenance Manual. Job Name: Contractor: Date: Document #: 2448HP250OOOM Revision Date: 1/10/11 24-48 HP250II Butterfly Valve Operation and Maintenance Manual Job Name: Contractor: Date: Document #: 2448HP250OOOM Revision Date: 1/10/11 SAFETY MESSAGES All safety messages in the instructions are flagged

More information

Operator s Manual. Sabre Crop Divider

Operator s Manual. Sabre Crop Divider Operator s Manual Sabre Crop Divider Canadian Agri Technologies Inc. 47 Halparin Drive Winnipeg, MB. R3X 1Z9 ph. 204 992.2484 fax. 204 237.0552 www.sabredivider.com TOLL FREE PARTS LINE 1 866 792-8437

More information

Instruction Manual Montage- und Betriebsanleitung Notice d utilisation

Instruction Manual Montage- und Betriebsanleitung Notice d utilisation Instruction Manual Montage- und Betriebsanleitung Notice d utilisation 2 Cast Fifth Wheel 2 Guss-Sattelkupplung Sellette 2 en fonte C O N N E C T Y O U R B U S I N E S S W I T H F O N T A I N E C O N T

More information

Mini Jacks Instruction Manual

Mini Jacks Instruction Manual J11050-M0_062017 Instruction Manual MODELS: J11050, J11055-5 Ton Capacity J11100-10 Ton Capacity J11200-20 Ton Capacity This is the safety alert symbol. It is used to alert you to potential personal injury

More information

CONTENTS: 5740AH - 40 Ton Air/Hydraulic Shop Press 5750AH - 50 Ton Air/Hydraulic Shop Press OWNER'S MANUAL

CONTENTS: 5740AH - 40 Ton Air/Hydraulic Shop Press 5750AH - 50 Ton Air/Hydraulic Shop Press OWNER'S MANUAL OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Safety Information and Warranty Information 3 Parts List 4-6 Assembly Instructions 7 Pump and Ram Assembly Instructions 8 Procedure for Bleeding Air 9 Pump

More information

HYDRAULIC SPREADER. Max. Pressure: 10,000 PSI (700 BAR) Unit Weight: HS2000 = 4.8 LBS. (2.17 Kg) HS3000 = 22 LBS. (9.98 Kg)

HYDRAULIC SPREADER. Max. Pressure: 10,000 PSI (700 BAR) Unit Weight: HS2000 = 4.8 LBS. (2.17 Kg) HS3000 = 22 LBS. (9.98 Kg) Form No. 103525 Operating Instructions for: HS2000 HS3000 HYDRAULIC SPREADER Max. Pressure: 10,000 PSI (700 BAR) Unit Weight: HS2000 = 4.8 LBS. (2.17 Kg) HS3000 = 22 LBS. (9.98 Kg) Definition: Hydraulic

More information

FOR ENGCON TILTROTATOR/ROTATOR EC/ECR02-30 THE WIDEST RANGE ON THE MARKET

FOR ENGCON TILTROTATOR/ROTATOR EC/ECR02-30 THE WIDEST RANGE ON THE MARKET Tiltrotator/rotator EC/ECR02-30 English FOR ENGCON TILTROTATOR/ROTATOR EC/ECR02-30 THE WIDEST RANGE ON THE MARKET Original instruction manual Version 201002 Congratulations for choosing engcon s tiltrotator/rotator.

More information

XP-115 Multi-Port Power Pack Operation and Maintenance Manual

XP-115 Multi-Port Power Pack Operation and Maintenance Manual XP-115 Multi-Port Power Pack Operation and Maintenance Manual http://www.torsionx.com Safety Guide To use the XP-115 Multi-Port Power Pack safely you must follow correct operation guidelines and inspect

More information

CE Operating and Maintenance Manual

CE Operating and Maintenance Manual CE Operating and Maintenance Manual Demolition and Sorting Grab Type S 450-D Zijtveld Grijpers The Netherlands www.zijtveld-grijpers.nl 1 Introduction Dear User, The Demolition/Selector grab is a piece

More information

Pro Series 2120 COMMERCIAL ROLLER SHUTTER OPENER

Pro Series 2120 COMMERCIAL ROLLER SHUTTER OPENER AUTOMATIC TECHNOLOGY AUSTRALIA PTY LTD Pro Series 2120 COMMERCIAL ROLLER SHUTTER OPENER OWNERS COPY Installation Instructions WARNING It is vital for the safety of persons to follow all instructions. Failure

More information

XP-AIR Multi-Port Power Pack Operation and Maintenance Manual

XP-AIR Multi-Port Power Pack Operation and Maintenance Manual XP-AIR Multi-Port Power Pack Operation and Maintenance Manual http://www.torsionx.com Safety Guide To use the XP-AIR Multi-Port Power Pack safely you must follow correct operation guidelines and inspect

More information

Prime Attachments & Custom Fab Brush Mower Owners/Operators Manual

Prime Attachments & Custom Fab Brush Mower Owners/Operators Manual Prime Attachments & Custom Fab Brush Mower Owners/Operators Manual The operator is responsible for the safe operation and maintenance of the machine. It is important that anyone who uses the machine is

More information

Multi Bale Handler. No Instruction Manual & Operating Guide

Multi Bale Handler. No Instruction Manual & Operating Guide Multi Bale Handler No. 1412 Instruction Manual & Operating Guide EC Declaration of Conformity in accordance with BS EN ISO/IEC 17050-1:2004 David Ritchie (Implements) Ltd., Carseview Road, Forfar, Scotland

More information

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-126 REV A 12/09

INSTALLATION AND MAINTENANCE MANUAL FORM #PM-126 REV A 12/09 HAND CRANK & MOTORIZED POWER CORD REELS: SERIES 1125PC SERIES: 1125PC HAND CRANK SERIES: 1125PC MOTORIZED COXREELS The technical data and images which appear in this manual are for informational purposes

More information

Heavy Duty Bottle Jacks

Heavy Duty Bottle Jacks Heavy Duty Bottle Jacks Models: 10300 & 10500 10300 10500! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol

More information

Hydraulic Gear Puller Instruction Manual

Hydraulic Gear Puller Instruction Manual + HGP053-M0_052015 Hydraulic Gear Puller Instruction Manual MODELS: HGP053 HGP103 HGP153 HGP253 HGP503-5 Ton Capacity -10 Ton Capacity -15 Ton Capacity -25 Ton Capacity -50 Ton Capacity SFA Companies 10939

More information

The Kenlift. Attachment Solutions

The Kenlift. Attachment Solutions Attachment Solutions The Kenlift Concrete median barrier handling device Operators Manual Conforms to ASME B 30.20, BTH-1 Design Category B, Service Class 3 TABLE OF CONTENTS Section I. General Information....

More information

20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT

20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT 20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT PART NO: 7614058 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this

More information

Operating Manual High Viscosity Dispense Valve Item #

Operating Manual High Viscosity Dispense Valve Item # Operating Manual High Viscosity Dispense Valve Item # 984594 CLOSE OPEN Item # 984594 Label # 8901197 Warnings INJECTION HAZARD Spray from the valve, hose leaks, or ruptured components can inject fluid

More information

Low Profile Service Jack Jack Stand Combo

Low Profile Service Jack Jack Stand Combo Low Profile Service Jack Jack Stand Combo Jack Stands Low Profile Service Jack U.S. Patent No. 6,199,379! This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

More information

Westfield, Mayrath, Hutchinson, Wheatheart

Westfield, Mayrath, Hutchinson, Wheatheart Warranty Information Operators Manual Installation Instructions Westfield, Mayrath, Hutchinson, Wheatheart Rust Sales, Inc. 2964 164 th Ave SE Harwood, ND 58042 (800) 478-7801 (701) 282-9194 www.hopperwalker.com

More information

Pistol Grip Battery-powered Pressing Tool

Pistol Grip Battery-powered Pressing Tool OPERATION MANUAL Serial Number Pistol Grip Battery-powered Pressing Tool PSTLPRESS-TOOL32kN Read and understand all of the instructions and safety information in this manual before operating or servicing

More information

SHOP PRESS ASSEMBLY INSTRUCTIONS

SHOP PRESS ASSEMBLY INSTRUCTIONS SHOP PRESS ASSEMBLY INSTRUCTIONS 240AO - 40 Ton Air Over Shop Press PRESS SPECIFICATIONS Sunex Part No. A B C D E F G H 240AO 74.2" 32" 29.7" 12" 6.7" 1.2" Air Assist Y(2) A - Total Height B - Inside Width

More information

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber

More information

50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP

50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP 50 TONNE HYDRAULIC PRESS MODEL NO: CSA50FP PART NO: 7615202 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this

More information