RE-7 1 West Dolphin Street, Siler City, NC: 3/4 RE-8 1 PITTSBORO PROCESSING PLANT: S+S box metal detector, model Genius, s/n

Transcription

1 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina Real Estate RE-1 1 SILER CITY PROCESSING PLANT: Address: 1101 East 3rd Street. Siler City, Chatham County, North Carolina, A one and partially two story poultry processing plant and support structures totaling approximately 27,101 square feet with concrete foundation, flooring and walls including refrigerated areas and finished office area. Interior clear height is 22 feet. There is adequate plumbing, HVAC and electrical power for plant operations. Plant construction is in stages from Acres (approximately), Zoning: Light Industrial RE-2 1 SILER CITY ADMINISTRATION BLDG: Address: 1100 East 3rd Street. Siler City, Chatham County, North Carolina, Administrative offices totaling approximately 7,472 square feet with concrete foundation, brick exterior, flooring, walls and finished office area. There is adequate plumbing, HVAC and electrical power. Built in Acres (approximately) RE-3 1 VEHICLE MAITENANCE YARD: Address: 1021 Elmer Road (SR 2126), Chatham County, North Carolina, A one story vehicle maintenance building of approximately 7,000 square feet with concrete foundation, flooring and pre engineered steel walls and roof. Interior clear height is 18 feet. There is adequate plumbing, HVAC and electrical power for repair operations. Building was constructed in Acres RE-4 1 BONLEE FEED MILL #1: Address: 4460 Old U.S. Highway 421S, Bonlee Chatham County, North Carolina, An older 7,000 tons per week finish feed facility 120 tall (26) finished feed bins 1,940 tons, (16) ingredient bins 2,180 tons, (9) Liquid tanks of 68,830 gallons. There is approx. 13,160 square feet of floor area. Structure is primarily wood crib/metal clad plant and warehouse buildings. The facility was built in the early 1900 s with a major upgrade in Acres RE-5 1 BONLEE FEED MILL #2: Address: Old U.S. Highway 421S (SR 1176), Bonlee, Chatham County, North Carolina, A 3,500 tons per week finish feed facility 120 tall (16) finished feed bins 500 tons, (18) ingredient bins 1,225 tons, (7) Liquid tanks of 49,760 gallons. There is approx. 13,120 square feet of floor area. Structure is primarily wood crib/metal clad plant and warehouse buildings. The facility was built in the 1950 s-1960 s with upgrades in Acres RE Walter Lambert Rd, Siler City, NC: 12 Acre farm with pond RE-7 1 West Dolphin Street, Siler City, NC: 3/4 Acre undeveloped lot (across street from S&H Oil Co). RE-8 1 PITTSBORO PROCESSING PLANT: Address: 270 Moncure Pittsboro Road, Pittsboro, Chatham County, North Carolina, A one and partially two story poultry processing plant and support buildings totaling approximately 126,368 square feet overall. The plant structure has concrete foundation, flooring and concrete and metal walls including refrigerated areas and finished office area. Interior clear height is 22 feet. There is adequate plumbing, HVAC and electrical power for plant operations. Plant construction is in stages from Acres Siler City - Sale begins in De-Bone Room Ceia box metal detector, model THS/3F, s/n , 17 3/4" x 11-3/4" aperture, mounted on 8' stainless steel frame conveyor, 15" plastic belt 1/2 HP drive motor S+S box metal detector, model Genius, s/n , 19 1/2" x 11 1/2" aperture, mounted on 6' s/s frame conveyor (no belt) 1/2 hp drive motor S+S box metal detector, model GLS, s/n H, 17 1/2" x 9 1/2" aperture CVP Systems vacuum bag sealer, model A200, s/s construction MP Equipment x-ray machine, s/s construction Belt conveyor, s/s frame, 17' long, 24" sanitary belt, electric drive, mounted on track FABCO cutting conveyor, s/s frame, 12' long, 13 1/2" plastic belt, electric drive FABCO incline conveyor, s/s frame, 8 1/2' total run, 8" cleated plastic belt, electric drive Page 1

2 Conveying system, s/s frame, 2-tier, including (1) cutting conveyor 13 1/2' long, 12" plastic belt, (1) incline conveyor, 30' total run, 8" cleated plastic belt, 90º turn, discharge chutes, electric drive MP Equipment x-ray machine, s/s construction Belt conveyor, s/s frame, 17' long, 24" sanitary belt, electric drive, mounted on track Cutting conveyor, s/s frame, 12' long, 13 1/2" plastic belt, electric drive Incline conveyor, s/s frame, 8 1/2' total run, 8" cleated plastic belt, electric drive Conveying system, s/s frame, 2-tier, including (1) cutting conveyor 13 1/2' long, 12" plastic belt, (1) incline conveyor, 30' total run, 8" cleated plastic belt, 90º turn, discharge chutes, electric drive Overhead inclined conveying system, s/s frame, including (2) incline conveyors (1) 4S (1) 30 total run, 9" cleated plastic belts (2) 1/4 hp drive motors (1) 5' discharge, dual 12" plastic belts,1/4 hp drive motor Marel overhead conveying weigh system, s/s frame, including (1) 6' feed, dual 12" plastic belts (1) 20' section 32" plastic belt with (8) pneumatic diverters & (1) 1/4 hp drive motor, Marel M3000 controls Incline conveyor, s/s frame, 20' total run, 12" cleated plastic belt, electric drive 1018 [Lot] (1) S+S, GLS, metal detector, 17 1/2" x 9 1/2" aperture, (1) s/s frame conveyor, 20' long, 12" plastic belt, electric drive Incline conveyor, s/s frame, 20' total run, 12" cleated plastic belt, electric drive 1020 [Lot] (1) S+S, GLS, metal detector, 17 1/2" x 9 1/2" aperture, (1) s/s frame conveyor, 20' long, 12" plastic belt, electric drive Incline conveyor, s/s frame, 18' total run, 12" cleated plastic belt, electric drive Incline conveyor, s/s frame, 26' total run, 12" cleated plastic belt, electric drive GAINCO box packer, model GS3100, s/n , s/s construction with 10' feed belt, 12" plastic belt, electric drive (6/29/11) GAINCO box packer, model GS3100, s/n , s/s construction with 12' feed belt, 12" plastic belt, electric drive (6/29/11) GAINCO box packer, model GS3100, s/n , s/s construction with 13' feed belt, 12" plastic belt, electric drive (6/29/11) Vacuum bag sealer, s/s construction 1027 [Lot] (1) GSE model 460 digital platform scale, 18" x 18" platform, stand mounted (1) Datamax model 019X label printer, CFS touch screen controls and s/s enclosure stand, Weigh/Label system FABCO box conveyor, s/s frame, 40' long, 18" wide, (2) slight jogs, track belt, (4) roller feeds, 2hp drive motor 1029 [Lot] (1) GSE model 460 digital platform scale, 24" x 24" platform, stand mounted (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1030 [Lot] (1) GSE model 460 digital platform scale, 24" x 24" platform, stand mounted (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system Marel profiler, model TSM2-C165, s/n A066198, NEVER INSTALLED, crated for shipment, template slicer/uniform poultry strips (2009) 1032 [Lot] FABCO box conveyor, s/s frame, approximately 140 running feet, 18" wide, 2hp drive motor (partially disassembled) Cone conveyor, s/s frame, 25' long, 57 cones mounted on 3" s/s table top belt, 1 hp drive motor 1034 [Lot] (1) GSE model 460 digital platform scale, 24" x 24" platform, stand mounted (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1035 [Lot] (2) 90º box conveyors, s/s frame (1) 10' (1) 18', 18" wide, track belts, 2 hp drive motors Proceed to Stack Cooler 1036 [Lot] (1) GSE model 460 digital platform scale, 18" x 18" platform stand, mounted, (1) Datamax model DMX label printer, (1) CFS touch screen controls and stainless steel enclosure stand, Weigh/label system Signode strapping machine, model Page 2

3 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina HB4310, s/s construction, mobile S+S box metal detector, model GLS, s/n H, 23 1/2" x 13 1/2" aperture, mounted on 6' s/s frame conveyor, 16" plastic belt, mobile, with feed and discharge roller conveyors 1039 [Lot] (2) Box conveyors, s/s frame (1) 90º, 12' long (1) 10' long, 18" wide (2) 2 hp drive motors with 10' roller discharge CEIA box metal detector, model THS/3E, 19 1/2" x 11 1/2" aperture, mounted on 5' s/s frame conveyor, 18" plastic belt, mobile 1041 [Lot] (2) Conveyors, s/s frame (1) 12' box conveyor, 18" wide. track belts (1) discharge 13 1/2' long, 18" plastic/roll belt (2) 2 hp drive motors Proceed back to Bone Cutting Room CVP Systems vacuum bag sealer, model A200, stainless steel construction 1043 [Lot] (2) Box conveyors, s/s frame (1) 90º, 14 1/2' long (1) 10' long, 18" wide, track belts (2) 2 hp drive motors CEIA box metal detector, model THS/3F, s/n , 17 3/4" x 11 3/4" aperture, mounted on 8' s/s frame conveyor, 16" plastic belt 1045 [Lot] (1) GSE model 460 digital platform scale, 6' x 4' floor plattform with ramp, (1) Datamax model DMX label printer, (1) CFS touch screen controls and stainless steel enclosure stand, Weigh/label system Proceed up Stairway 1045A 1 In ground floor platform scale, s/s 4' x 4', GSL 460 digital readout SWF tray erector, model SWF1T6, s/n 5778, with electro cam Plus 5000 controls and Nordson hot melt SWF tray erector, model TF600, s/n , with Electro Cam Plus 5000 controls and Dynatec hot melt SWF tray erector, model TF600, with Electro Cam Plus 5000 controls and Dynatec hot melt SWF tray erector, model SWFIT6, s/n 5777, with Nordson hot melt SWF tray erector, model SWFIT, s/n 3889, with Dynatec hot melt Proceed to Refrigeration Room Frick refrigeration compressor #9, model SCG, s/n SCG , 639 HP, R717 refrigerant, volume ratio , max drive speed rpm 4500, swept volume max speed 2051, max allowable press PS/PSS/ psig 400, Quantum LX controls (2005) Frick refrigeration compressor #8, model SCG, s/n SCG , 639 HP, R717 refrigerant, volume ratio , max speed rpm 4500, design pressure psig 400, Quantum controls (2003) Frick refrigeration compressor #C7, model SCG, s/n SCG , 335 HP, R717 refrigerant, volume ratio , max speed rpm 4500, design pressure psig 400, Quantum controls (2003) Frick 350 refrigeration compressor #7, model TDSH, s/n TDSH193L26750, R717 refrigerant, volume ratio , max speed rpm 4500, design pressure psig 350, Frick controls (1997) Frick refrigeration compressor #6, model RWB II 100H, s/n S0770PFMPLHAA3, 250 HP, R717 refrigerant, max speed rpm 3600, max design pressure psig 300 (1997) Mycom refrigeration compressor #3, model N8WB, s/n M830082, 150 HP, leak (psig) hp 313 LP 185, HYD (psig) hp 470 LP Mycom refrigeration compressor #2, model N8WB, s/n M830011, 150 HP, leak (psig) hp 313 LP 185, HYD (psig) hp 470 LP Mycom refrigeration compressor #4, model N8WB, s/n M830010, 150 HP, leak (psig) hp 313 LP 185, HYD (psig) hp 470 LP [Lot] (2) Receiving tanks, (1) 8' high 6' diameter (1) 9' high 32" diameter with condensate return skid (outside) Proceed Outside Frick recirculator skid #2, 12' long x 3' dia. horizontal tank, (2) 4-1/2" x 2-1/2" centrifugal pumps, MAWP 150/ º F, MDMT -45º 113 psi, National Board # (1995) Page 3

4 Frick recirculator skid #1, 12' long x 3' dia. horizontal tank, (2) 4-1/2" x 2-1/2" centrifugal pumps, MAWP º F, MDMT -45º 11.7 HG psi, National Board #88864 (1989) Tank, 15 1/2' high, 18' diameter, insulated with (3) 2 1/2" x 2 1/2" centrifugal pumps Goulds self priming centrifugal pump, 7" x 7", 5 hp Fiberglass tank, 22' high, 11' diameter with 2 1/2" x 2 1/2" centrifugal pump Goulds self priming centrifugal pump, 7" x 7", 5 hp Proceed up Stairway to Roof (Use Caution) Chilled water make up skid, stainless steel, 18 plates, with (2) 2-1/2" x 2" centrifugal pumps Evapco condenser #EC-9, model PMCB-725, s/n M, 3-fan with vertical pump Imeco condenser #EC-3, model XLP-M-405, s/n LH, evaporative, 3-fan, R717 refrigerant, (1) 10 (1) 5 hp motors, 250 psi with vertical pump (3/17/95) York condenser #EC-3, model XLP-XL-940-LH, s/n , evaporative, 3-fan, R717 refrigerant, (1) 30 (1) 15 hp motors, 3000 psig with vertical pump (3/4/05) York condenser #EC-1, model XLP-XL-940-LH, s/n , evaporative, 3-fan, R717 refrigerant, (1) 30 (1) 15 hp motors, 3000 psig with vertical pump (7/25/03) York horizontal high pressure receiver tank, model HR SP, s/n , 16' long, 8' diameter, MAWP 300/FV 250º F, MDMT -20º F@ 300/FV psi, Nat. Bd # (2005) Proceed to Ice Machine Room Frick tubular icemaker # IMI, stainless steel construction, 30 tubes, 8' auger bottom, s/s 12" with controls and receiving tank and pump Frick icemaker # IM2, s/n , stainless steel construction, MAWP 250 psi@ +200º F, MDMT -20º F@250 psi, Nat. Bd# with receiving tank and pump (1997) Tuthill positive rotary blower, model L3, s/n , 20 hp with 10 hp blower (cover removed), located in room below icemakers Proceed to Munters deck Munters air handler #2, model ICA , s/n 363/ Job#680171, with horizontal receiving tank (6/06) Munters air handler #1, model ICA , s/n 275/ Job#674706, with horizontal receiving tank (7/05) Clima-Cell air handler Goodman air conditioner unit, model CPC120XXX4BXXXAA, s/n , R410A refrigerant, 446/236 psig 1079 [Lot] (3) Air conditioner units, (1) H.C. 1 model TGC180B-4L-350 (1) Weatherking model WRMA-A030iKi0G (1) Lennox model BCSN [Lot] (4) Roots positive rotary blowers, model 59-V-RA1, 10 hp, stand mounted dual configuration with (1) ring compressor blowers (1 never installed) Proceed inside down stairway to Eviseration Room 1081 [Lot] (2) Frick condensers # AU11 & AU13, 3-fan 1082 [Lot] (2) Frick condensers # AU11 & AU13, 3-fan, (chilling room) 1083 [Lot] (5) Condensers # AU19 & AU18,AU17, AU16, AU15, 3-fan, (debone room) 1084 [Lot] (5) Condensers # AU24 & AU23, AU22, AU21, AU20, 3-fan, (debone room) 1085 [Lot] (2) Frigidcoil/Imeco condensers # AU3 & AU4, 4-fan, (located on loading dock) 1086 [Lot] Imeco condensers, 4-fan (cooler #1) Proceed to Boiler Room Cleaver Brooks packaged boiler, model CB-200HP, s/n L60325, natural gas, 8,369,000 BTU/Hr., max pressure 150 psi, with condensate return skid (1975) Kemco Systems water heater, s/n 10870, s/s, natural gas, 200 gpm max, 100 gpm min, 12' high, 5' diameter with centrifuge Page 4

5 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina pump and pressure blower Stainless steel tank, 4000 gallons, 11' high, 8' diameter with (3) centrifugal pumps Brown & Morrison roto-jet pump, model R11 2x2, s/n 01DR , 50 hp, size S Brown & Morrison roto-jet pump, model R11 2x2, s/n , 50 hp, size S Stainless steel tank, rectangular 4' x 4' x 6' Stainless steel tank, 5' straight side, 3' diameter, 20" s/s legs, open top with cover, 2" x 2 1/2" mounted centrifugal pump Proceed Outside Sanova mixing system, including: (1) mix skid, (5) assorted pumps, (5) accutator valves, steam valves, (2) control panels, (1 with AB Panelview 600), (1) transformer with breaker box and portable building with A/C 1095 [Lot] (2) Poly tanks, spray insulated 12' high, 10' diameter Gardner Denver package air compressor, model V570A, s/n S324645, 70kw, 3760 rpm, 125 psig (located in compressor room at front of build by parking lot) (4/10) Proceed to Vacuum Room # Nash vacuum pump, 60 hp, model CL1002, s/n 74U Nash vacuum pump, 60 hp, model CL1002, s/n 74U Voomer/Vacuum Pump Systems vacuum pump, model VG100-M, s/n 1336, 75 hp Nash vacuum pump, model CL702, s/n , 40 hp Vooner/VacAir vacuum pump, model LP7CM, s/n 832, 40 hp Garnder Denver air compressor, model EDE0JF, s/n B9GAB9C, 50 hp, 125 psig with air dryer and receiving tank Proceed Outside Waste water tank, MS, 50' long x 24' wide x 16' high Gorman-Rupp self priming centrifugal pump, model T6A60S-B/F, s/n , 7" x 7", 40 hp Gorman-Rupp self priming centrifugal pump, model T6A60S-B/F, s/n , 7" x 7", 40 hp 1105A 1105B [Lot] [Lot] (3) Gorman-Rupp self priming centrifugal pumps, 7" x 7", 25 hp (located behind vacuum room) (2) Gorman-Rupp self priming centrifugal pumps, 4 1/2" x 4 1/2", 20 hp (located behind vacuum room) 1106 [Lot] (2) Poly tanks, 8' straight side, 7 1/2' diameter, dome top ((1) located by vacuum room) Liquid Tech Tank Systems pretreated poultry process s/s wastewater tank, model 03180, s/n 92-36, 1,739,568 gallon capacity, 36' high, 92' diameter, bolted construction (8/03) Proceed to Waste Treatment Room FRC Environmental stainless steel waste treatment system, model T32, s/n 996, including: (1) tank 8-1/2' long x 6-1/2' wide x 9-1/2' high, (1) tank 11-1/2' long x 6-1/2' wide x 12' high V-bottom, (1) 10 pass tube with associated pumps and controls (6/28/2002) Waste treatment tank, 13 1/2' long, 10 1/2' wide, 9 1/2' high, V-bottom, 10 pass tube, associated pumps and controls Chemical mix system, including (2) dosing pumps (2) poly tanks 6 1/2' high, 5 1/2' diameter with clamp on mixer and (1) poly receiving tank 7 1/2' high, 3 1/2' diameter hp air compressor, vertical tank mount Proceed outside to rear of Building Waste water tank, MS, 40' long x 6-1/2' wide x 8' deep x 9' high, with (2) 2-1/2" x 3" centrifugal pumps Atlantis chemical feed system, including s/s tank skid with dosing pump (mobile) Storage tank, MS, 24' high, 9 1/2' diameter, bolted construction with 2 1/2" x 2 1/2" Gorman Rupp centrifugal pump Praxair horizontal CO2 tank, 55' long, 7' diameter, 100,000 lb capacity, MWP 350 psig Poly tank "chilled water", insulated, 24' Page 5

6 high, 12' diameter Weigh bridge, 58' long, 9 1/2' wide with (2) GSE model 465 digital readout, capacity CLC 30 tons, 100,000 x 20 lb Proceed inside to Cooler Nitrogen freeze tunnel stainless steel construction Incline conveyor, s/s frame, 11' total run, 12" cleated plastic belt, 1 hp drive motor, mobile Belt conveyor, s/s frame, 16' long, 12" plastic belt 1120A 1 S+S metal detector, model GLS , s/n H, 13 1/2" x 7 1/2" aperture with stand Vooner FloGard vacuum pump, model VG10A-M, s/n 2250, never installed (12/20/06) Berry R & D rotary screen, model BWS-6, s/n 1769, s/s construction (1/7/10) 1123 [Lot] (1) GSE model 460 digital platform scale, 18" x 18" platform, stand mounted, (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1124 [Lot] (1) GSE model 460 digital platform scale, 18" x 18" platform, stand mounted, (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1125 [Lot] (1) Doran model 7000XL digital platform scale, 18" x 18" platform, stand mounted, (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1126 [Lot] (1) GSE model 460 digital platform scale, 18" x 18" platform, (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1127 [Lot] (1) GSE model 460 digital platform scale, 24" x 24" platform, (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1128 [Lot] (1) GSE model 460 digital platform scale, 24" x 24" platform, (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system 1129 [Lot] (1) GSE model 460 digital platform scale, 24" x 24" platform stand mounted, (1) Datamax model DMX label printer, CFS touch screen controls and s/s enclosure stand, Weigh/label system Signode strapping machine, model HB-4310, s/s construction, mobile with additional roll of strapping Signode strapping machine, model HB-4310, s/s construction, mobile with additional roll of strapping GSE digital platform scale, model 450, s/n , 24" x 24" platform, stand mounted Doran digital platform scale, model 700XLM, s/n XL707054, 18" x 18" platform, cap n max 10000d Doran digital platform scale, model 700XLM, s/n XL730238, 18" x 18" platform, cap n max 10000d 1135 [Lot] (3) Doran digital platform scales, model 700XLM, s/n XL704231, XL721722, XL708444, (1) 12" x 12" (2) 10" x 10" platforms, cap n max 10000d 1136 [Lot] (2) Doran digital platform scales, model 700XLM, s/n XL708048, XL708443, 10" x 10" platforms, cap n max 10000d 1137 [Lot] (4) Digital scales, (3) Salter Brecknell model C3235 portable, battery powered, built-in charger (1) OHAUS Pioneer 1138 [Lot] (2) Datamax label printers, model DMX , s/n / , with CFS touch screen controls and s/s stand 1139 [Lot] (2) Cutting tables, s/s frame (1) 67 1/2" long, 23 1/2" wide, 36 1/2" high (1) 68" long, 24" wide, 32" high 1140 [Lot] Assorted bearings, contents on 11 pallets WEIR Roto-Jet pump, model R11, s/n 10DR , size 2 x 2 (no drive motor, never installed) Toshiba 150 hp motor, (never installed) Worldwide Electric Corp 60 hp motor, (never installed) Baldor 50 hp motor, (never installed) 1145 [Lot] (2) Baldor 40 hp motors, (never installed) 1146 [Lot] (2) Baldor 30 hp motors, (never installed) Page 6

7 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina 1147 [Lot] (14) Baldor explosion proof motors, (1) 7 1/2 (3) 3 (2) 2 (7) 1/2 (1) 3/4 hp (never installed), contents on pallet 1148 [Lot] (7) Motors, (4) 10 (3) 7 1/2 hp (never installed), contents on 2 pallets 1149 [Lot] (12) Motors, (1) 20 (10) 15 (1) 7 1/2 hp (never installed), contents on 4 pallets 1150 [Lot] (38) Assorted motors, 5 hp, 3 hp, 2 hp, 3/4 hp, 1/2 hp (never installed), contents on 3 pallets 1151 [Lot] (38) Assorted motors, 3 hp, 2.2 kw, 1/2 hp (never installed), contents on 4 pallets SEW gear drive, model KF107R77016DDT80K4-KS, (never installed) 1153 [Lot] (2) Gear drives, model KT37TDRE80M4DH, (never installed) 1154 [Lot] (12) SEW Assorted gear drives, (never installed) 1155 [Lot] (53) Assorted gear reducers, (never installed), contents on 4 pallets 1156 [Lot] (14) Chemical dosing pumps, (5 never installed) 1157 [Lot] Electrical, drives, breakers, modules, switches (contents on 18 pallets) 1158 [Lot] Cable and wire, (contents on 5 pallets) 1159 [Lot] Assorted fuses, (contents on pallet) 1160 [Lot] Electrical fittings, (contents on 8 pallets) 1161 [Lot] Brass and copper, fittings, valves, tubing (contents on pallet) 1162 [Lot] Stainless steel valves, (contents on pallet) 1163 [Lot] Stainless steel clamps, (contents on pallet) 1164 [Lot] Stainless steel fittings, (contents on pallet, 1 box) 1165 [Lot] Stainless steel chain, belt, nuts, bolts, (contents on 2 pallets 1166 [Lot] Sprockets, couplings, pullies, (contents on 9 pallets) 1167 [Lot] (13) Sections roller conveyor, s/s frame, various sizes 1168 [Lot] (14) Stainless steel mobile carts 1169 [Lot] Stainless steel table (2) mobile drain tables 1170 [Lot] (13) Stainless steel tables, (various sizes) 1171 [Lot] (23) Stainless steel stands, racks, tables 1172 [Lot] Assorted stands, operators platforms, racks Aluminum 10-step warehouse ladder Cotterman 9-step warehouse ladder 1175 [Lot] (2) 20' Extension ladders, (1) aluminum (1) fiberglass 1176 [Lot] (4) 12' Fiberglass ladders 1177 [Lot] (3) 10' Fiberglass ladders 1178 [Lot] (4) 8' Fiberglass ladders 1179 [Lot] (4) 6' Fiberglass ladders 1180 [Lot] (2) Polar Cool swamp coolers, s/s frame, mobile 1181 [Lot] Plastic barrels and dollies 1182 [Lot] Plastic tubs, shovels 1183 [Lot] EZ Rizer covers, approximately 100 Proceed to De-Bone Room 1184 [Lot] (4) Electrical, breakers, contacts, switches, UPS, (contents on 9 pallets) 1185 [Lot] Conduit fittings and parts, (contents on 8 pallets) 1186 [Lot] Assorted wire, (contents on 4 pallets) 1187 [Lot] (20) Motors, 5 hp to 1/4 hp, never installed (contents on 3 pallets) Lincoln 75 hp motor 1189 [Lot] (4) Motors, (2) 50 hp (2) 40 hp (contents on stand and pallet) 1190 [Lot] (7) Motors, (1) 20 hp () 10 hp (1) 5 hp (4) 4 kw (contents on pallet) 1191 [Lot] Assorted motors and parts, (contents on 6 pallets) 1192 [Lot] Hydraulic valves and motors, (contents on 2 pallets) 1193 [Lot] Assorted pipe fittings, (contents on 5 pallets) 1194 [Lot] Assorted sprockets, couplings, pullys, chain, (contents on 6 pallets) 1195 [Lot] Separator parts, (contents on 5 pallets) Page 7

8 1196 [Lot] Nordson assorted parts, (contents on 2 pallets) 1197 [Lot] Assorted Starflex parts, (contents on 3 pallets) 1198 [Lot] (3) Poly Clip System bag clippers, model Plastic [Lot] Gorman Rupp pump parts, (contents on 4 pallets) 1200 [Lot] Assorted valves, (contents on pallet) Dayton 12 1/2" blower, model 4C217, (never installed) 1202 [Lot] Gardner Denver compressor parts, (contents on 3 pallets) Stainless steel sterilizer tank, 24" long, 18" wide, 20" deep, 12" legs with s/s cups True Hone knife sharpener Creusen knife sharpener, model DP7200T, with (2) True Hone sharpeners (1) model HCA (1) LC 1206 [Lot] Knives, scissors, knife sharpeners, (contents on 4 pallets) 1207 [Lot] Scalder parts, (contents in crate) 1208 [Lot] TSM, DCI, Marel parts, (contents on 10 pallets) 1209 [Lot] Scales, weigh cells, digital readouts, (contents on 5 pallets) 1210 [Lot] (2) Belt splicers, (1) 40" (1) 24" with travel cases Rotary air valve Incline conveyor, s/s frame, 13 1/2 total run, 24" cleated plastic belt, 1 hp drive motor Incline belt conveyor, s/s frame, 15 1/2 long, 16" cleated plastic belt, 3/4 hp drive motor 1214 [Lot] Eviseration line parts, (contents on 3 pallets, 1 tub outside on pad) Proceed to Parts Store Building 1215 [Lot] Hardware, nuts, bolts, screws, fuses, (contents in cubby cabinets, Lawson style drawers and boxes on floor) 1216 [Lot] (2) Justrite flammable liquid storage cabinet, model 25600, 60 gallon, 227 litre capacity 1217 [Lot] (31) Shelf units with contents, plumbing, seals, chain, signs, assorted parts 1218 [Lot] (2) Storage cabinets (1) red cabinet (3) shelf units (2) offices, with contents Proceed Upstairs 1219 [Lot] Eviseration line parts, contents on 18 shelf units 1220 [Lot] V-belts, chain belts, fittings, contents on 7 shelf units 1221 [Lot] (34) Shelf units with contents, fan blades, PVC fitting and assorted parts Proceed out rear deck 1222 [Lot] (2) Pipe racks with contents, stainless, OVC, steel, (located outside, rear of building) Proceed to Maintenance Shop Miller arc welder, model Dialarc, s/n KA789720, constant current AC/DC Miller welder, model Syncrowave 200, s/n LK310378L Miller DC plasma cutting system, model Spectrum 500, s/n KA Rigid electric pipe threader, model 300T, s/n ED47621-I Ellis 9 drill press, model 9400, s/n 94D Jet 8" dual pedestal grinder Shop press frame, (no hydraulics) Lewis Machine Co grinder, model CBS, s/n [Lot] Rigid (2) manual pipe threaders, holder, reamer (6) dies, conduit bender (2) lube guns Welding table, 8' long, 4' wide, 34" high with vise Dayton job box Dayton job box Dayton job box 1236 [Lot] Welding table, 60" long, 38" wide, 38" high with anvil (3) stands Proceed to Garage Shop Page 8

9 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina Betenbender 10' shear, model , s/n , electric, 1/4", 10g cap Roper Whitney Pexto 10' brake, model 1012A, s/n , manual, 12 g capacity Miller arc welder, model Invision 354MP, s/n KK096854, DC inverter with S-22A 24V wire feed Miller arc welder, model Miller Matic 200, s/n KB105367, CV/DC Miller welder, model Thunderbolt XL, s/n LF460441Y, CC/AC/DC, 225/150 amp, cart mounted Miller welder, model Thunderbolt XL, s/n LC565534, CC/AC/DC, 225/150 amp Miller welder, model Thunderbolt XL, s/n LC601482, CC/AC/DC, 225/150 amp, cart mounted Lincoln welder, model AC/DC/225/125L, s/n , AC/DC, cart mounted 1245 [Lot] (2) welding carts (3) cylinder dollies Rigid electric drain snake, model K750, s/n VW Conduit bender Mobile filter unit Eaton/Crookmotor truck transmission, model FR016210B-1C, s/n [Lot] Truck and forklift parts, radiator, filters, gaskets, miscellaneous (contents on 11 pallets and 2 shelf units) Gates hydraulic hose crimper, model Powercrimp 300B, with fittings and hose on 3 pallets Kellog American 5 hp air compressor, mounted on horizontal receiving tank Makita 14" cut off saw Makita portable band saw 1255 [Lot] (2) Porter Cable portable band saws 1256 [Lot] DeWalt 7 1/4" circular saw and 2.5 mm planer 1257 [Lot] (2) Makita sawsalls 1258 [Lot] Makita angle drill and Bosch chipper Makita rotary hammer 1260 [Lot] Makita cordless tools, (3) drills (1) flourescent light (1) flashlight (4) batteries (1) charger Milwaukee 3/8" cordless hammer drill, with (4) batteries (1) charger 1262 [Lot] (2) Big Red hydraulic service jacks, 2-ton capacity 1263 [Lot] Hand tools, welding supplies, scissor sharpener, pulleys, foggers, swageloc (contents on table) Welding table, 8' long, 4' wide, 33" high 1265 [Lot] (3) Gas weed wackers (1) shovel (1) post digger (1) tiller 1266 [Lot] Fittings, nuts, bolts, screws, washers (contents in cubby cabinets and Lawson style drawers) Delta job box Dayton job box Protectoseal flammable storage cabinet, model [Lot] (5) Hand trucks 1271 [Lot] Scrap on layout pad, s/s, m/s, tanks, fans, racks, grating, polytanks (including pipe rack on side of garage with contents) ' Storage trailer, with contents (motors, brushes, cleaning supplies, parts) with stairway ' Storage trailer, with contents (belting and hose) ' Storage trailer, with contents (pumps, motors, hose, parts) /2' Storage trailer, with contents (filters) Proceed to Forklift Charging Room Hyundai LPG forklift, model NLFT5CTTT, s/n HB , 2600 lb. cap., 185" lift, solid tire, side shift Hyundai LPG forklift Komatsu electric forklift, model FB15MH2, s/n A, 3-wheel, 2780 lb capacity, 185" lift, solid tire, 36V with Precision Mark I battery charger Yale electric pallet jack, model MPW060LEN24T2748, s/n A897N04386D, Page 9

10 6,000 lb capacity, 24 Volt Yale electric pallet jack, model MPW060LEN24T2748, s/n A897N05239G, 6,000 lb capacity, 24 Volt Yale electric pallet jack, model MPW060LEN24T2748, s/n A897N05234G, 6,000 lb capacity, 24 Volt Yale electric pallet jack, model MPW060LEN24T2748, s/n A897N05123F, 6,000 lb capacity, 24 Volt Yale electric pallet jack, model MPW060LEN24T2748, s/n A897N05232G, 6,000 lb capacity, 24 Volt Yale electric pallet jack, model MPW060LEN24T2748, s/n A897N05231G, 6,000 lb capacity, 24 Volt Yale electric pallet jack, model MPB040ACN24C2748, s/n N562900, 4,000 lb capacity, 24 Volt; with IBCI charger (located upstairs) Yale electric pallet jack, model MPW060LEN24T2748, s/n A897N05233G, 6,000 lb capacity, 24 Volt (non operational) GNB 24 Volt pallet jack battery V-Line 24 Volt pallet jack battery Volt pallet jack battery Dougherty 24 Volt pallet jack battery 1291 [Lot] (2) 24 Volt pallet jack batteries, (1) V-Line (1) C-Line 1292 [Lot] (2) V-Line 24 Volt pallet jack batteries GNB 24-Volt battery charger, model Fer Charger GNB 24-Volt battery charger, model Fer Charger GNB 24-Volt battery charger, model Fer Charger GNB 24-Volt battery charger, model Fer Charger C & D 24-Volt battery charger, model Ranger II Eagle 24-Volt battery charger, model Mark II Dougherty/Yale pallet jack, 5500 lb/2500 kg capacity Dougherty/Yale pallet jack, 5500 lb/2500 kg capacity 1301 [Lot] (2) Dougherty/Yale pallet jacks, 5500 lb/2500 kg capacity 1302 [Lot] (2) Dougherty/Yale pallet jacks, 5500 lb/2500 kg capacity 1303 [Lot] (2) Dougherty/Yale pallet jacks, 5500 lb/2500 kg capacity 1304 [Lot] (2) Dougherty/Yale pallet jacks, 5500 lb/2500 kg capacity 1305 [Lot] (3) Dougherty/Yale pallet jacks, 5500 lb/2500 kg capacity 1306 [Lot] (3) Pallet jacks, (1) Dougherty/Yale 5500 lb/2500 kg capacity (1) Crown 5000 lb (1) Liftrite 1307 [Lot] Assorted electrical, contents in 5 plastic totes (on 2 pallets) 1308 [Lot] Assorted belting, contents in plastic tote (on 5 pallets) 1309 [Lot] Galvanized fittings, contents in plastic tote 1310 [Lot] PVC fittings, contents in plastic tote and on 2 pallets 1311 [Lot] (15) Plastic totes, various sizes 1312 [Lot] Plastic parts bins, various sizes, contents in 9 plastic totes 1313 [Lot] Raingear, boots, gloves, contents on 6 pallets 1314 [Lot] Bump hats, hair nets, beard covers, contents on 6 pallets 1315 [Lot] Assorted plastic bins, contents on 4 pallets 1316 [Lot] Assorted plastic bins, contents on 4 pallets 1317 [Lot] 32 gallon refuse barrels, covers and shovels, contents on 5 pallets 1318 [Lot] Janitorial, pails, seat covers, mops, handles, hand dryers, soap dispensers, contents on 5 pallets Proceed upstairs to Cafeteria Area 1319 [Lot] Janitorial, refuse barrels, pails, paper products, bins, shovels 1320 [Lot] Boots, bump hats, gloves, respirators, rain gear, hair nets, tape, (merchandise on Page 10

11 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina shelves) 1321 [Lot] (66) 5-door cubby lockers, with (7) galvanized coat racks and (2) metal 3-shelf stands 1322 [Lot] (3) Vending machines 1323 [Lot] Folding tables and chairs, 35 tables, approximately 100 chairs Proceed to Conference Room 1324 [Lot] (2) Conference tables, (28) green arm chairs 1325 [Lot] Refrigerator, coffee maker, (2) microwaves 1326 [Lot] (2) TV's, overhead projector, file, 2 mobile stands, s/s stand Proceed to Office Area Hearing test booth 1328 [Lot] Office furnishings, desk, credenza, side file, (3) 4-drawer files, swivel arm chair, (4) side chairs, bookcase, fax, shredder and flat screen 1329 [Lot] Office furnishings, desk with extension, 4-drawer file, swivel arm chair, (4) steno chairs, bookcase, fax, end table, (2) side chairs and flat screen 1330 [Lot] Supply closet contents 1331 [Lot] Office furnishings, (4) desks, (1) 4 (1) 2-drawer file, (2) swivel arm chairs, (2) flat screens (1) printer 1332 [Lot] Office furnishings, (2) desks, credenza, table, (1) 4 (1) 2-drawer file, safe, (2) swivel arm chairs, (2) flat screens (1) printer 1333 [Lot] Office furnishings, (2) desks, credenza, bookcase, side table, (1) 4 (2) 2-drawer fax, swivel arm chair, (4) steno chairs, (2) refrigerators, (2) flat screens (1) printer 1334 [Lot] Office furnishings, L-shaped desk, credenza, 2-drawer lateral, (4) 4 (2) 2-drawer files, (2) tables, fax, steno chair, side chair, (2) flat screens (1) printer Proceed to Human Resources Fargo label printer 1336 [Lot] Office furnishings, (3) desks, credenza, (1) lateral file, (12) 4 (1) 2-drawer files, (2) tables, (2) bookcases, (4) steno chairs, (2) Proceed to Nurses Office side chairs, (5) flat screens (2) printers 1337 [Lot] Eamination table and chair, doctor's scale, CMI intoxilyzer, (2) hand dynamometer, (2) blood pressure, (1) stethoscope 1338 [Lot] Office furnishings, desk, (4) 4-drawer files, (6) 2-drawer files, (2) steno chairs, refrigerator, fax, (3) printers, (2) flat screens Proceed to USDA Office 1339 [Lot] Refrigerator and microwave 1340 [Lot] Office furnishings, (3) desk, credenza, (2) 4-drawer legal, (8) 2-drawer files, (8) chairs Proceed downstairs to Lab on Mezzanine Digital platform scale stainless steel 1342 [Lot] (2) Salter/Brecknell digital scales, model C3235, 6 kg x kg / 12 lb x 0.02 lb capacity, portable, battery power, built-in charger 1343 [Lot] (3) Salter/Brecknell digital scales, model C3285, 3 kg x kg / 6 lb x lb, portable, battery power, built-in charger 1344 [Lot] Lab equipment, (1) Fisher incubator (1) hot plate (1) Vortex mixer (3) ph meters (1) chlorine tester (1) thermocouple thermometer (1) light meter (1) petite lightbox, assorted weights Market Forge autoclave, model Sterilematic Portable weigh cell, with case and printer 1347 [Lot] (7) Matheson toxic gas detectors, model 8014KB 1348 [Lot] (7) Hach chlorine test kits, with (5) boxes sampling device 1349 [Lot] (2) Refrigerator/freezers 1350 [Lot] File cabinets and chairs, (7) 4 (9) 2-drawer files Proceed to Main Floor 1351 [Lot] (3) Stainless steel trough sinks, (through out plant) 1352 [Lot] (2) Stainless steel slicers 1353 [Lot] (2) Stainless steel feed stands (1) mobile tub Page 11

12 1354 [Lot] (10) Stainless steel single sinks throughout plant ((1) with 3 stations) 1355 [Lot] Stainlesss steel pipe throughout plant 1356 [Lot] Stainlesss steel ductwork throughout plant 1357 [Lot] Stainlesss steel conveyor, stands and frames Siler City - Administrative Office Building Toshiba copier/fax/scanner, model e Studio 200L Konica Minolta copier/fax/scanner, model bizhub C [Lot] (3) Printers, (1) Ricoh InfoPrint 1532, (1) HP Officejet J4680 all-in-one (1) Brother HL 5140 laserjet 1404 [Lot] Office furnishings, (1) executive desk (2) credenzas (1) conference table (1) bookcase (1) executive chair (7) green swivel arm chairs 1405 [Lot] Office furnishings, (1) L-shpaed desk (2) 2-drawer lateral files (1) credenza (1) printer stand (1) bookcase (2) blue steno chairs (2) brown arm chairs (1) 2-drawer file (1) printer, flat screen and typewriter 1406 [Lot] Office furnishings, (1) desk (1) credenza (1) table (2) bookcases (2) 4-drawer legal files (1) executive chair (6) blue arm chairs (1) flat screen (1) printer 1407 [Lot] Office furnishings, (1) desk (1) credenza (1) table (1) bookcase (1) 4-drawer (2) 2-drawer files (1) swivel arm chair (2) side arm chairs (1) flat screen 1408 [Lot] Office furnishings, (1) desk (1) credenza (1) bookcase (1) 2-drawer lateral (2) 4-drawer files (1) steno chair (4) blue side arm chairs (1) refrigerator (1) printer (1) scanner 1409 [Lot] Office furnishings, (2) desks (1) bookcase (1) legal (4) letter 4-drawer files (1) swivel arm chair (1) brown side chairs (1) flat screen Fire King 4-drawer legal file 1411 [Lot] Office furnishings, (1) computer desk (1) bookcase (1) 2-door storage cabinet (3) 4-drawer legal files 1412 [Lot] Office furnishings, (1) desk (1) credenza (1) bookcase (1) 4-drawer legal file (1) swivel arm chair (2) side chairs (1) fax (1) flat screen 1413 [Lot] Office furnishings, (2) offices (2) desks (3) tables (5) chairs (2) printers (2) flat screens 1414 [Lot] Office furnishings, (2) desks (1) credenza (3) 4-drawer lateral files (1) 2-drawer file (1) chair (1) printer 1415 [Lot] Office furnishings, (3) offices: (3) desks (9) file cabinets (1) bookcase (8) chairs (3) flat screen monitors (2) typewriters (1) printer 1416 [Lot] Office furnishings, (2) offices: (2) desks (9) file cabinets (2) bookcases (4) chairs (2) flat screen monitors (2) printers (1) fax HP 42" plotter, model C777OB, s/n BG32K3206J Kyocera copier, model Taskalfa A 1 Neopost postage machine, with Pitney Bowes scale 1419 [Lot] (2) 4-drawer legal files 1420 [Lot] ATT telephone system, model System 75, with (5) distributin panels (3) UPS and rack (no phone sets) 1421 [Lot] Breakroom furnishings, (1) refrigerator (1) microwave (1) toaster oven (1) coffee maker (2) vending machines (2) round tables (5) stacking chairs Toshiba copier/fax/scanner, model e Studio 200L Xerox copier, model Copycenter Canon copier, model Image Runner 5000S 1425 [Lot] (4) 4-drawer letter files 1426 [Lot] (6) 4-drawer letter files 1427 [Lot] (6) 4-drawer letter files 1428 [Lot] Conference table with 12 chairs 1429 [Lot] Office furnishings, (4) offices: (4) desks (2) tables (3) bookcases (5) file cabinets (10) chairs (3) flat screen monitors (2) printers 1430 [Lot] Office furnishings, (3) offices: (3) desks (1) computer stand (1) bookcase (3) file cabinets (10) chairs (2) flat screen monitors (1) fax 1431 [Lot] Office supplies, contents in room Page 12

13 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina 1432 [Lot] Reception furnishings, (8) blue arm chairs (2) tables (2) lateral files (1) receptionist chair (1) fax (1) flat screen monitor 1433 [Lot] (2) Projectors, (1) NEC (1) Boxlight 1434 [Lot] (3) Overhead projectors MBM folder, model 207M 1436 [Lot] (2) Printers, (1) Ricoh Info Print 1532 (1) Ricoh Aficio AP610N 1437 [Lot] (10) Fax machines and printers 1438 [Lot] (9) PC drives, with (4) flat screens, keyboards, mouses, cable 1439 [Lot] Avaya Communications phone system, model Definity, with (14) phone sets, (3) boxes (2 still on wall), (1) box accessories 1440 [Lot] Walkie talkies Symtech headlight aligner, model HBA Ease diagnostic system, mobile 1443 [Lot] Conference room furnishings, (3) tables (24) tan swivel arm chairs (1) podium (1) office table Pittsboro - Sale begins on Process floor - Vaccum Room Bin dump, stainless steel, 6' x 4' x 4' with hydraulics A-one hopper, model A-1-Hopper V, s/n , s/s V-bottom, 60" x 60", 12" straight side, 32" V-bottom with (2) actuator valves Hopper, s/s, slant bottom, 72" x 72", 20" to 45" slant Henneken vacuum tumbler, s/s, 4' long, 5' diameter, no vacuum, covers removed for cleaning Brine tank, s/s, 36" straight side, 30" diameter, 20" legs, top mount mixer, 1 1/2" x 1 1/2" s/s centrifugal pump, mobile Weightronix bagger, model WI-130, s/s, mobile Weightronix bagger, model WI-130, s/s, mobile Marel horizontal slicer, model TSM2-C165, s/n A035514, s/s construction (2005) Marel horizontal slicer, model TSM2-C165, s/n A035513, s/s construction (2005) Marel weigh grader loader, model DWU, s/n A009983, s/s frame, Marel 3000 controls with 13' feed bucket elevator, 5 1/2" x 5 1/2" x 3" buckets and 16 station belt conveyor, 22' long dual 18" plastic belts 2011 [Lot] DSI portioner, model 624, s/n 4198, s/s construction, with 14 1/2' discharge conveyor, 35 1/2" s/s mesh belt, with flow waterknive, model 20XD-60, s/n , 60 KPSi, 420 MPA, 100 hp with Panel Mate control (11/01) Weigh grader loader, s/s frame, Marel 3000 controls, (2) approximately 24 total run bucket type feed conveyors 8" x 4 1/2" x 3" buckets, 16 station belt conveyor, 22' long, dual 18" plastic belt tier conveying system, s/s frame, approximately 36' overhead run chain and roller, 22' lower run chain belt with 18' feed conveyor 2014 [Lot] Diversion conveying system, s/s frame, with 8' feed conveyor, 18" plastic belt, 60' 180º run with (3) 4 1/2' 90º turns with cross over stairs Z bucket elevator, s/s frame, 2' feed, 9' high, 5' discharge, 12" x 10" x 4" buckets Incline conveyor, s/s frame, 16' total run, 12" cleated plastic belt 2017 [Lot] Overhead conveyors, s/s frame (3) 30; runs (1) 12' run, 12" plastic belts 2018 [Lot] (2) Incline conveyors, s/s frame, (1) 22' total run, 6" cleated plastic belt (1) 24' total run (no belt) Z bucket elevator, s/s frame, 6' feed, 7' high, 4' discharge, 12" x 10" x 4" buckets Incline conveyor frame, s/s, 20' total run,(no belt) 2021 [Lot] (2) Incline conveyors, s/s frame, (1) 15' total run, 10" cleated plastic belt USA Sales horizontal slicer, 401 B Series 164, s/s frame, dual land with compression belt, 6 & 3' long, 12" belts, mobile Incline belt conveyor, s/s frame, 9' long, 12" plastic belt Page 13

14 2024 [Lot] Miscellaneous stainless steel, tables, stands, sink, frames, in groups as marked in 2 rooms 2025 [Lot] (4) Starflex baggers, model SES Incline belt conveyor, s/s frame, 24' total run with (2) 6' hang conveyors, 12" rubber belt 2027 [Lot] (2) Box conveyors, s/s frame (1) 32' 180º run (1) 18' "S" curve, chain belt 2028 [Lot] Box conveying system, including s/s frame (1) 6 1/2', 18" belt conveyor (2) 9', 18" belt conveyors (2) 8' 90º box conveyors and roller conveyors 2029 [Lot] Overhead box conveying system, s/s frame, from processing floor to deboning room and box erector room, approximately 300' Proceed upstairs to Deboning Room Bin dump, stainless steel, 6' x 6' x 4' with hydraulics Hopper elevator, s/s, 6' x 5' x 4', 9' elevator 3' discharge, 12" cleated plastic belt Overhead distribution conveyor and hopper, s/s frame, 27' long, 24" belt with 5' x 6' hopper conveyor, 5' belt Singulator, s/s, 56" diameter Marel weigh deck, model DWU-1900/300, s/n A008244, s/s, with 5' high speed dual belt feed, 12" belt and Marel series 2000 digital readout (2001) Marel flow line, s/s, double cone, 26 station, 42" long, 14' discharge, 12" belts Hopper, s/s, slant bottom, 72" x 72", 20" to 45" slant Marel weigh deck, model DWU-1900/300, s/n A003966, s/s, with 5' high speed dual belt feed, 12" belt and Marel series 2000 digital readout (2000) Marel flow line, s/s, double cone, 26 station, 42" long, 14' discharge, 12" belts Reject conveying system, s/s frame including 20' dual lane run, 10' inclined run 25' inclined run, 12' straight run (various size belt) Double conventional cone line, s/s frame, 62' long, 24" belt Incline reject conveyor, s/s frame, approximately 50' run, 12" cleated plastic belt Feed conveyor to wing platform, s/s frame, approximately 80' run with incline section, 12" cleated plastic belt 2043 [Lot] Conveying system, s/s frame including (1) 12' (1) 18' (1) 20' suspended and 40'overhead incline, runs, various size belts 2044 [Lot] Conveyors, s/s frame (1) 12' (1) 18' incline, 12" cleated plastic belt (1) 10', 18' belt 2045 [Lot] Wing process platform, including (7) Cantrell wing processors and associated conveyors 2046 [Lot] Box conveyor, s/s frame, approximately 110' run with crossover stairs GSE digital platform scale, model 460, 24" x 24" platform 2048 [Lot] (3) Stainless steel trough sinks, and (1) wash sink 2049 [Lot] Miscellaneous stainless steel, tables and stands as grouped and numbered Proceed upstairs to Box Room SWF tray erector, model TF600V, s/n , with Dynamic hot melt and electro cam Plus 5000 series controls SWF tray erector, model TP600VK, s/n SWF10280, with dynamic hot melt, (Located in room across hall) SWF tray erector, model SWF1T4, s/n 3687, with dynamic hot melt Ice maker, (located on roof) Proceed to Pump Room Morris remote ammonia water rechiller, model WRC-RA-2000 HSS, s/n , max WP º F, Shell TH.500 in, Head TH.375 in, Nat. Bd# 217, 21' long, 2' diameter with receiving tank Reimers Electra Steam Inc electric boiler, model R-36, s/n , max S.W.P. 100 psi, max operating 15 psi with condensate return Proceed to Next Room Kemco water heater, stainless steel, Page 14

15 Auction 3698 Omtron USA (Townsend Poultry) Durham, North Carolina natural gas, BTUH, 12.0 x 106, with blower, (1) pump, 11' high x 6' dia Stainless steel tank, 9' high, 9' diameter with (1) vertical pump and (2) centrifugal pumps Brown & Morrison roto jet pump, model RGB 2 x 2, s/n , 60 hp Brown & Morrison roto jet pump, model RGB 2 x 2, s/n , 60 hp Proceed outside to East side of Building Chicago blower skid, model 20, s/n , 30 hp Gardner Denver air compressor, 25 hp with receiving tank Proceed to West Side of Building 2063 [Lot] Gardner Denver air compressor, 50 hp with Lewis 25 hp air compressor and receiving tank Kobalt air c ompressor, 5 hp, vertical tank mount 2065 [Lot] (2) Hydraulic pumps, 40 hp Proceed to Front of Building Storage tank, MS, 32' high x 40' dia Storage tank, m/s, 40' high, 70' diameter 2068 [Lot] (3) Centrifugal pump 2069 [Lot] (3) Centrifugal pumps Proceed to Area outside Shop Tomco horizontal carbon dioxide tank, s/n , 52,000 lb. cap., 30' long x 7' dia Praxair horizontal carbon dioxide tank, 45,000 lb capacity, 30' long, 7' diameter 2073 [Lot] (3) Receiving tanks, (1) horizontal 22' long, 4 1/2' diameter (1) vertical 8' high, 3' diameter (1) horizontal 6' long, 2' diameter (overhead) Fuel tank, 5' long, 3' diameter Proceed to staging Area by Loading dock Processing 2075 [Lot] (2) Stainless steel totes, 40" x 40" x 40" Ross Industries tenderizing belt, model TC 700 WSSP, s/n 4753, 7' long, 24" belt, mobile Screen, 6' long, 24" diameter SWF tray feeder Meat grinder, with attachments, hopper feed and tank Inject Star pickle injector, model B1-100, s/n [Lot] Stainless steel hopper 72" x 72", 36" V-bottom (1) conveyor frame (1) blower WEHN roto jet pump, model 2200B 2 X 2, s/n 17DR , (no drive motor) Grundfoss vertical pump, model CR1508AGJAEHOGE, (no drive motor) Toshiba 100 hp motor Holland Supply 100 hp motor Holland Supply 100 hp motor 2087 [Lot] (5) Motors, (1) 150 (1) 60 (2) 40 (1) 15 hp 2088 [Lot] (7) Motors, (contents on pallet) 2089 [Lot] (3) Square D drive controls, model Econoflex Pressure steam washer MEYN wing processor, model , s/n SWP0572, (2008) 2092 [Lot] (27) Motors 2093 [Lot] (16) Motors 2094 [Lot] Gear drives and reducers 2095 [Lot] (17) Electric belt drives (2) belts 2096 [Lot] (6) Pumps, (2) dosings (2) centrifugal (2) vacuum 2097 [Lot] Janitorial/safety, shovels, boots, hair nets, mop heads, towel and soap dispensers " Dock lift Stainless steel link belt, 34" x 55' 2100 [Lot] Stainless steel pipe, tables, stands, (in vacuum room and room behind wall) Proceed to Maintenance Shop Jet lathe, model PGH, with chuck, tool holder, 84" bed Page 15