N e W. modular plastic belts 7300 and 7200 series
|
|
- Homer Fisher
- 5 years ago
- Views:
Transcription
1 N e W REGINA Chain Products* are available from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40) (800) fx: (40) (800) web: sales@mdmetric.com Request for quotation form: *Note: Motorcycle Chain products are not available from MARYLAND METRICS 80e modular plastic belts 7300 and 7200 series 2.
2 series INDUSTRIES & APPLICATIONS Regina Matveyor series is suitable for handling both loose and packaged products, such as plastic and glass bottles, aluminum and steel cans, in the following industries and applications: INDUSTRIES Bottling and canning Food filling Container manufacturing Ph a r m a c e u t i c a l Pa p e r/c a r d b o a r d Consumer goods APPLICATIONS Depalletizers Pressureless In l i n e r s a n d Co m b i n e r s Si n g l e l a n e a n d Ma s s c o n v e y o r s Ac c u m u l a t i o n t a b l e s Pa c k a g i n g m a c h i n e s Ca s e c o n v e y o r s Palletizers BENEFITS TOP SURFACE BOTTOM SURFACE - Smooth and uniform top surface, thanks to location of retention clip underneath modules and reduced gaps between hinges. - Limited wear, thanks to maximized bottom sliding surface. - Easy assembly and disassembly, thanks to optimized design and location of retention clip, which can be easily rotated from both the bottom and the side of belts and chains. - Active transfer between 90 conveyors and elimination of deadplates, by using Active Transfer Modules (ATM). SIDE BOTTOM - Standardization of wearstrips and easy installation side by side with Matveyor sideflexing chains 782 and 783 series, thanks to the same thickness PRODUCT RANGE: 3/4 PITCH, LIGHT DUTY SERIES, AMERICAN STANDARD SERIES SURFACE AVAILABLE WIDTHS BELT MATERIAL 7300 Solid Top Dedicated and Modular 7200 Flush Grid Dedicated and Modular 7300 ATM (Active Transfer Modules) Solid Top Dedicated MATERIALS Type Description Features Grey Dark Green Ultra Performance Acetal Resin Superior Grade of Acetal Resin (DK 2 ) Ultra Performance special homopolymer acetal resin. Particularly suitable for applications where low coefficient of friction and contained dusting are needed. Next generation material, based on a Delrin acetal resin reinforced with Kevlar, newly developed by Regina and DuPont, able to reach the lowest coefficient of friction with maximum wear resistance. Thanks to the superior properties of, the usage of lubricants can be drastically reduced or even eliminated without loosing performance in conveyor applications. Regina Matveyor series is equipped with high wear resistance PBT material pins. Polyamide material sprockets with stainless steel hardware available for Regina Matveyor series. DuPont Delrin and DuPont Kevlar are registered trade marks of E.I. DuPont De Nemours and Associates 2
3 7300 series - dedicated widths Surface: Solid Top Pin Material: PBT Available widths: 3 ¼ (82,5 mm) 4 ½ (4,3 mm) 6 (52,4 mm) 7 ½ (90,5 mm) VERSION WITH TRACKING GUIDE VERSION WITHOUT TRACKING GUIDE Dimension A B E G L P rd GC 7,3 2,33 4,6 43 4,35 9,05 25,4 44, (Solid Top - 3 /4 Pitch) WITHOUT GUIDE D2K D2K 450 WITH GUIDE 7300G G G G G D2K G D2K 450 CHAIN WIDTH W 82, , , , , , PLATE THICKNESS T WORKING LOAD (25 C / 77 F) N lbs BELT WEIGHT Kg/m lbs/ft 0, , , , , , MATERIAL 7300 D2K G D2K ,4 6.00, D2K G D2K , ,82.22 Standard length: 3,048 m (0 feet) 3
4 7300 series - modular belts Surface: Solid Top Pin Material: PBT Working Load (at 25 C / 77 F): N/m (2,055 lb/ft) Belt widths: 9 (228,6 mm) or wider in 3 (76,2 mm) standard increments. Dimension E L P RD T 4,6 4,35 9,05 25,4 8, (Solid Top - 3 /4 Pitch) MATERIAL D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K 060 Belts wider than 524 mm (60 ) available with standard increments of 76,2 mm (3 ) Example: = 63 inches Ref or 7300 D2K 063 On request belts available in /3 (8,5 mm) increments, starting from 9 (228,6 mm) BELT NOMINAL WIDTH W 228, ,8 2 38, , , , , , , , , , , , ,4 5 37, , ,0 60 BELT WEIGHT Kg/m lbs/ft 2,5.44 2, , , , , , , , , , , , , , , , , Belts available in the requested length 4
5 7200 series - DEDICATED WIDTHS Surface: Flush Grid with 20% open surface Pin Material: PBT Available widths: 3 ¼ (82,5 mm) 4 ½ (4,3 mm) 6 (52,4 mm) 7 ½ (90,5 mm) VERSION WITH TRACKING GUIDE VERSION WITHOUT TRACKING GUIDE Dimension a b E g L P RD gc 7,3 2,33 4,6 43 4,35 9,05 25,4 44, (Flush Grid - 3 /4 Pitch) WITHOUT GUIDE D2K D2K 450 WITH GUIDE 7200G G G G G D2K G D2K 450 CHAIN WIDTH W 82, , , , , , PLATE THICKNESS T WORKING LOAD (25 C / 77 F) N lbs BELT WEIGHT Kg/m lbs/ft 0, ,0 0.68, ,68.3 0, , MATERIAL 7200 D2K G D2K ,4 6.00, D2K G D2K , ,68.3 Standard length: 3,048 m (0 feet) 5
6 7200 series - modular belts Surface: Flush Grid with 20% open surface Pin Material: PBT Working Load (at 25 C / 77 F): N/m (2,055 lb/ft) Belt widths: 9 (228,6 mm) or wider in 3 (76,2 mm) standard increments. Dimension E L P RD T 4,6 4,35 9,05 25,4 8, (Flush Grid - 3 /4 Pitch) MATERIAL 7200 D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K D2K 060 Belts wider than 524 mm (60 ) available, with standard increments of 76,2 mm (3 ) Example: = 63 inches Ref or 7200 D2K 063 On request belts available in /3 (8,5 mm) increments, starting from 9 (228,6 mm) BELT NOMINAL WIDTH W 228, ,8 2 38, , , , , , , , , , , , ,4 5 37, , ,0 60 BELT WEIGHT Kg/m lbs/ft, ,6.75 3, , , , , , , , , , 6.2 9, ,4 7.00, , , , Belts available in the requested length 6
7 7300 ATM series - ACTIVE TRANSFER MODULES Surface: Solid Top Pin Material: PBT Available widths: 4 ½ (4,3 mm) + wing 7 ½ (90,5 mm) + wing RIGHT VERSION LEFT VERSION Dimension a b C (k 4 / 2 ) C (k 7 / 2 ) d E g L P RD gc 7,3 2,33 37,5 7,5 48,8 4,6 43 4,35 9,05 25,4 44, GATM (Solid Top - Left Version) 7300GATM 450 LH 7300GATM 750 LH 7300GATM D2K 450 LH 7300GATM D2K 750 LH CHAIN WIDTH W mm inches 60, , , ,2 9.3 PLATE THICKNESS T WORKING LOAD (25 C / 77 F) N lbs BELT WEIGHT Kg/m lbs/ft, ,99.34, ,99.34 MATERIAL Standard length: 3,048 m (0 feet) 7300GATM (Solid Top - Right Version) 7300GATM 450 RH 7300GATM 750 RH 7300GATM D2K 450 RH 7300GATM D2K 750 RH CHAIN WIDTH W 60, , , ,2 9.3 PLATE THICKNESS T WORKING LOAD (25 C / 77 F) N lbs BELT WEIGHT Kg/m lbs/ft, ,99.34, ,99.34 MATERIAL Standard length: 3,048 m (0 feet) 7
8 SPROCKETS FOR 7300/7200 SERIES Material: Reinforced Polyamide Bolts and nuts in stainless steel material Machined version Molded version MACHINED SPLIT DRIVE AND IDLER SPROCKETS N TEETH Z 7 2 PITCH DIAMETER OUTSIDE DIAMETER BORE SIZE SQUARE BORE ROUND BORE WEIGHT RB RB inches SQ REF. DRIVE REF. IDLER REF. kg lbs 03, , , , /6 /4 3 /8 7 /6 /2 3 /6 /4 3 /8 7 /6 /2 2 MPBAS Q MPBAS Q MPBAS Q MPBAS Q MPBAS Q MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS T MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F MPBAS F ,25 0,25 0,24 0,23 0,23 0,23 0,43 0,42 0,4 0,40 0,40 0,40 0, TYPE Other bore sizes in imperial units are available on request, within the range specified in the table. Bore sizes in metric units are also available: 25 mm to 35 mm for 7T and 25 mm to 50 mm for 2T. Example: Z=2, 30mm round bore, drive ref.: MPBAS T MOLDED SPLIT DRIVE AND IDLER SPROCKETS N TEETH Z PITCH DIAMETER OUTSIDE DIAMETER BORE SIZE SQUARE BORE ROUND BORE WEIGHT RB RB SQ REF. DRIVE REF. IDLER REF. kg lbs 45, , , , , , inches 3 /6 /4 3 /8 7 /6 /2 2 2 /2 3 /6 /4 3 /8 7 /6 /2 2 2 /2 3 /6 /4 3 /8 7 /6 /2 2 2 /2 MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS Q MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS T MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F MPBS F ,43 0,42 0,42 0,42 0,4 0,4 0,38 0,35 0,44 0,44 0,44 0,43 0,43 0,42 0,40 0,36 0,47 0,47 0,47 0,46 0,46 0,45 0,43 0, TYPE Other bore sizes in imperial units are available, within the range specified in the table. Bore sizes in metric units are also available: 25 mm up to 65 mm. Example: Z=25, 40mm round bore, drive ref.: MPBS T
9 SPROCKETS/POCKETS POSITIONING INSTRUCTIONS 7300/7200 SERIES DEDICATED WIDTHS DRIVE AND IDLER SPROCKET DRIVE AND IDLER SPROCKET DRIVE SPROCKETS DRIVE SPROCKETS IDLER SPROCKET IDLER SPROCKET For lighter duty applications, N drive sprocket and N idler sprocket can be used. MODULAR BELTS DRIVE SPROCKETS / HEAVY DUTY APPLICATIONS DRIVE SPROCKETS / LIGHT DUTY APPLICATIONS IDLER SPROCKETS Please contact Regina Application Engineering department for a more detailed evaluation 2. 9
10 SPROCKETS/POCKETS POSITIONING INSTRUCTIONS 7300 SERIES ACTIVE TRANSFER MODULES LEFT VERSION RIGHT VERSION DRIVE AND IDLER SPROCKET DRIVE AND IDLER SPROCKET LEFT VERSION DRIVE SPROCKETS IDLER SPROCKET RIGHT VERSION DRIVE SPROCKETS IDLER SPROCKET For lighter duty applications, N drive sprocket and N idler sprocket can be used. Please contact Regina Application Engineering department for a more detailed evaluation. 0.
11 SPROCKETS/WEAR STRIP POSITIONING INSTRUCTIONS 7300/7200 SERIES DEDICATED WIDTHS AND MODULAR BELTS N OF TEETH Z 7 2 A B C D E R 47, , , , , , , , , , ACTIVE TRANSFER MODULES INFEED DISCHARGE ATM 4 / 2 ( Left and Right Versions ) N OF TEETH Z INFEED DISCHARGE A F G L F G L 47, ,2.90 2, , ,7.84 7, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ATM 7 / 2 ( Left and Right Versions ) N OF TEETH Z A F G L F G L 47, , , , , , , , INFEED 2, , , , , , , , , , , , DISCHARGE 7, , , , , , , , , , , , , , , 6.50 Note: it is recommended to perform pre-production tests and make adjustments as necessary, to both infeed and discharge belt, for successful product transfer. Please contact Regina Application Engineering department for a more detailed evaluation. 2.
12 ITALY Regina CaTene CaLiBRaTe S.p.a. HeaD office: Via Monza, Cernusco Lombardone (LC) - Italy Tel Fax sales@reginachain.net MEXICO Regina de MeXiCo S.a. de C.v. Av. Aviación Col. San Juan de Ocotan 4509 Zapopan, Jalisco Mexico Tel Fax sales.mx@reginachain.net USA Regina USa, in C. 305 E. Mahn Court Oak Creek, WI USA Tel Fax CHINA Regina Tian Jin CHain & BeLT Co., LTD. Xi Qing Economic Development Area, Xiang Rui road n. 7 Tian Xiang Industrial Zone Tian Jin - China Tel Fax sales.cn@reginachain.net FRANCE Regina industr ie S.a.R.L. Z.A.C. des Chatelliers 34 Rue des Frères Lumière Saint Jean De Braye - France Tel Fax sales.fr@reginachain.net UNITED KINGDOM Regina international LiMiTeD Unit, Dyneley Road, Greenbank Business Park Whitebirk, Blackburn, Lancs BB 3AB - United Kingdom Tel Fax sales.uk@reginachain.net ARGENTINA Regina in TeRna Tiona L S.a. Diagonal 90, Josè Leon Suarez Prov. Buenos Aires Argentina Tel Fax sales.ar@reginachain.net GERMANY Regina Tel Fax sales.de@reginachain.net SPAIN CaDena S Regina españa, S.L. Calle Industria, La LIagosta - Barcelona - España Tel Fax sales.es@reginachain.net REGINA Chain Products* are available from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40) (800) fx: (40) (800) web: sales@mdmetric.com Request for quotation form: *Note: Motorcycle Chain products are not available from MARYLAND METRICS Regina ConveyoR is a registered trademark of: 4 copyright 203 maryland metrics/regina catene calibrate s.p.a.
Modular Belts and Components for Nose Over Transfer
Modular Belts and Components for Nose Over Transfer INDEX ABSTRACT End-to-end transfer description and general criticalities... 3 Regina solution to best tackle end-to-end transfer... 3 Regina ½ pitch
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationExtra Heavy Duty modular belts 2508 & 2630 Series
Extra Heavy Duty modular belts 2508 & 2630 Series EMERSON. E CONSIDER IT SOLVED. APPLICATIONS Pictures by courtesy of Hohmeier Anlagenbau GmbH and Audi AG Ingolstadt - Germany 2508 HEAVY DUTY BELTS PATENT
More informationExtra Heavy Duty Modular Belts 2508 & 2630 Series
Extra Heavy Duty Modular Belts 2508 & 2630 Series Applications Dual Strand Test Tunnel Sgle Strand Car Wash Individual Pushers Mount Easily On Belt Surface Pictures by courtesy of Hohmeier Anlagenbau GmbH
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationModular transfer plates with rollers
Modular transfer plates with rollers For heavy duty construction, and for bigger width please see page 328-330 Create a smooth transfer between two conveyors Can be used individually or back-to back Ultra
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationRenold Roller Chain products are available from
Renold Roller Chain products are available from MARYLAND METRICS RENOLD Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationRexnord 6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
Rexnord 6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Automotive Solution Breakthrough 6990 Series H4 Hybrid MatTop Chain Rexnord 6990 Series Hybrid H4 MatTop
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationMain features: All the Megablue product line is FDA/USDA/USDA Dairy Approved.
MEGABLUE Megablue Megablue is Megadyne s product, specifically created to give a good alternative to the classical plastic modular belt for the food processing industry. This product, with its smooth surface,
More information7400 Series Nose Bar Conveyors
700 Series Nose Bar Conveyors Installation, Maintenance and Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866 TEL: 6-67-7600 Hartland, WI 509-000
More informationSection 10 Conveyors and Transport Components
1 Section Conveyors and Transport Components Roller elements, roller profiles, support rollers, and other components are perfect to set up lean manufacturing work cells. These non-powered roller elements
More information7400 Series End Drive Conveyors
700 Series End Drive Conveyors Installation, Maintenance and Parts Manual Flat Belt Conveyor Cleated Belt Conveyor DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN OMNI-GRID & OMNI-LITE Turn Curve belting
More informationEngineering Manual Multidirectional Roller Top Belt Series 2253RT
Engineering Manual Multidirectional Roller Top Belt Series 2253RT 1Chains 1 0& sprockets 5 0Wear 5strips 5 3accessories 3 0 0 5return 1 0systems 5 4supports 0 5 Curves 0 0& 0tracks 5 a Side 5 1guide 5
More informationModular belt conveyor WL678X
Modular belt conveyor 678X Contents System information...139 Conveyor sections...140 Modular Belts - Introduction...141 Modular belts...142 Conveyor Beams - Introduction...143 Conveyor frame components...145
More informationStainless steel systems
Stainless steel systems Copyright FlexLink 2014 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has
More informationModular belt conveyor WL526X
Modular belt conveyor 526X Modular plastic belt conveyor 526X Contents System information...123 Conveyor sections...124 Modular Belts - Introduction...125 Modular belts...126 Conveyor Beams - Introduction...127
More informationApplications MEGABLUE
MEGABLUE MEGABLUE MEGABLUE is Megadyne s product, specifi cally created to give a good alternative to the classical plastic modular belt for the food processing industry. This product, with its smooth
More informationModular belt conveyor WL374X
S Modular belt conveyor Contents System information...107 Conveyor sections...109 Modular Belts - Introduction...110 Modular belts...111 Conveyor Beams - Introduction...112 Conveyor frame components...114
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 14. siegling prolink modular belts. 11/17 (Ref-No. 888) Straight running belts Pitch 12.7 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 11/17 (Ref-No. 888) SERIES 14 Straight running belts Pitch 12.7 (0.50 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49
More informationSeries SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni X-MPB C page 3-4 Datasheet: uni X-MPB C EN Plastic Modular Belt Series uni X-MPB Type C Running
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-48EP- 0/09/202 48EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-48EP- 0/09/202 Cleco
More informationRexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
More informationCOMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...
COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N OMNI-FLEX 3 X 1 FLAT
More informationEXCERPT FROM PROLINK ENGINEERING MANUAL SERIES 13. siegling prolink modular belts. 12/17 (Ref-No. 888) Straight running belts Pitch 8 mm (0.
EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) SERIES 13 Straight running belts Pitch 8 (0.31 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0, Fax +49 511
More informationAmmeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application Content uni OWL 66% page 3-4 Datasheet: uni OWL 66% Plastic Modular Belt Series uni OWL Type 66% Belt material
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationMicroSpan. Chain. Chain. revised SpanTech LLC
Chain MicroSpan Chain 1 27 SpanTech LLC Contents Overview... 3 MicroSpan Chain Types... 3 The Nose Bar... 6 Chain Fabrication... 8 Chain Widths... 8 MicroSpan Sprockets... 9 Standard Split Sprocket...
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More information3.25, 4.5, 7.5 Tabletop Conveyor Specifications
3.25, 4.5, 7.5 Tabletop Conveyor Specifications Complete Conveyor Systems and Equipment Conveyor Specifications Frame Material Thickness Material Finish Design 12 GA Mild steel Stardust Silver" powder
More informationPROLINK ENGINEERING MANUAL
EXCERPT FROM PROLINK ENGINEERING MANUAL 01/19 (Ref-No. 888) SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Forbo Siegling GmbH Lilienthalstraße 6/8, D-30179 Hannover Phone +49 511 6704 0 www.forbo-siegling.com,
More informationFROST. Components and Services for Power & Free Systems ALUMINUM
FROST Components and Services for Power & Free Systems ALUMINUM Frost Company Introduction Frost Incorporated Founded: 1913 Located: 2020 Bristol, N.W. Grand Rapids, MI 49504 Tel: 1.616.453.7781 Fax: 1.616.453.2161
More informationASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time.
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. PRODUCT TECHNICAL BULLETIN Reduced Radius Omni-Pro 100 USA and International
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More informationModular plastic belt conveyor WK
Modular plastic belt conveyor Contents System information...405 Belts introduction...406 Belts...407 Conveyor sections...408 Conveyor frame components introduction...409 Conveyor frame components...410
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationRFC SPECIALTY LOCKING DEVICES
RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142
More informationDTS -C. Conveyor Design Manual. Comb System 4707/
DTS -C Comb System Conveyor Design Manual 4707/5997-7705 Rexnord, Rex, TableTop, MatTop and DTS-C are trademarks of Rexnord Industries, Inc. All rights reserved. Table of Contents Introduction / Safety.................................
More informationOmni-Pro 075. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 075 USA and
More informationMatTop Chains. Overview Rexnord MatTop Chains. Solid Top Chains Hybrid. Perforated Top Chains 6391T. RubberTop Chains
MatTop Chains Solid Top Chains 1000 1005 1010 2000 2015 3125 5935 6300 6995 6995 Hybrid 7700 8505 Perforated Top Chains 500 1000 2000 2016 5936 6391T 7706 8506 Overview Rexnord MatTop Chains RubberTop
More informationAutoweigh Feeder Series 400 A New Generation of Weigh Feeders
Autoweigh Feeder Series 400 A New Generation of Weigh Feeders Simply The Best Narrow Width Weigh Feeder Money Can Buy Precise Measurement The Milltronics 400 Series is one of the most accurate in-motion
More informationCV-Series. Single Curve Conveyors
CV-Series Single Curve Conveyors J O I N T H E Q U I E T R E V O L U T I O N I N C O N V E Y O R T E C H N O L O G Y V-Series Engineered to have the tightest turning radius in the industry. Built for nearly
More informationApplications MEGABLUE
MEGABLUE MEGABLUE MEGABLUE is Megadyne s product, specifi cally created to give a good alternative to the classical plastic modular belt for the food processing industry. This product, with its smooth
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More information7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
More informationMulti-Conveyor LLC. Your best, conveyed better. Quick Ship Conveyors Catalog. Quality. Quick Delivery. Value
Multi-Conveyor LLC Your best, conveyed better. S uccess L ine Quick Ship Conveyors Catalog Quality Quick Delivery Value 25 Windustrial Road PO Box 10 Winneconne, Wisconsin 54986 Phone (920) 582-7960 Fax
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More information35 Series Screwdrivers
Parts Manal 823121EN 35 Series Screwdrivers For additional product information visit our website at http://www.apextoolgroup.com 823121EN Cleco Description Language Version: This Parts Manual is the Original
More informationFrom a modest beginning in 1976 producing small. quantities of gravity conveyor rollers, Arnott Handling
ARNOTT HANDLING LTD From a modest beginning in 1976 producing small quantities of gravity conveyor rollers, Arnott Handling Equipment Limited has grown to become one of the United Kingdom s foremost manufacturers
More informationMay 2009 English Version Issue 3.0
S Y S T E M P L A S T E N G I N E E R I N G M A N U A L 05/09 ENG E N G I N E E R I N G M A N U A L May 2009 English Version Issue 3.0 ENGINEERING MANUAL Issue 3.0 - May 2009 - English version The information
More informationP R O D U C T T E C H N I C A L B U L L E T I N
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N USA and International
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More information48EP Series Electronically Controlled Pistol Grip Nutrunner
Parts Manual PL2EN-8EP /0/20 8EP Series Electronically Controlled Pistol Grip Nutrunner For additional product information visit our website at http://www.apextoolgroup.com PL2EN-8EP /0/20 Cleco General
More informationDesign Innovative, robust construction, straight section eliminated before and after curve. Features Speed: Up to 70 meters per minute
The new modular radius belt is available in different widths with a closed-top surface capable of handling a variety of package sizes, types and configurations including delicate products and applications
More informationMay 2011 English Version Issue 3.6
E N G I N E E R I N G M A N U A L May 2011 English Version Issue 3.6 ENGINEERING MANUAL Issue 3.4 - April 2011 - English version APPLICATION CONSIDERATIONS. The proper selection and application of power
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationSingle action two way cross block
Connecting clamps Single action two way cross block SINGLE ACTION TWO WAY CROSS BLOCK PATENTED Feature: the special design provides a means for rapid adjustment of both vertical and horizontal side rail
More informationModular plastic belt conveyor WL
Modular plastic belt conveyor WL Contents System information...389 Conveyor sections...390 Belts introduction...391 Belts...392 Accessories for use with Friction top belt...392 Conveyor frame components
More informationAirtight Containers. Anti-allergic Airtight Containers GN 1/9 GN 1/6 GN 1/4 GN 1/3. 6 x. 6 x. 6 x. 6 x. 6 x. Ref / 1.
Airtight Containers GN 1/9 Ref. 0300 / 0.6qt 6/8x41/4x. Ref. 0301 / 1.1qt 6/8x41/4x4 Ref. 030 / 1.6qt 6/8x41/4x6 GN 1/6 Ref. 0303 / 1.qt 6/8x63/8x. Ref. 0304 / 1.9qt 6/8x63/8x4 Ref. 030 /.qt 6/8x63/8x6
More informationSIT Power Transmission, a history of passion and technology
SIT Power Transmission, a history of passion and technology SIT S.p.A., a core member of the Scaglia Group which was founded nearly 200 years ago in Bergamo Italy, has a 50 years history dedicated to manufacturing
More information19RA Series Right Angle Nutrunner
Parts Manual P12-1014EN 19RA Series Right Angle Nutrunner For additional product information visit our website at http://www.apextoolgroup.com P12-1014EN Cleco Model Nomenclature A 19 R A X XX XX X Tool
More informationP R O D U C T T E C H N I C A L B U L L E T I N SUPER SMALL RADIUS OMNI-GRID. Turn Radius = 0.8 x (the Belt Width) (Patent Pending)
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N TABLE OF CONTENTS
More informationPRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
More informationALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
More informationALLROUNDER 270 S. Distance between tie bars: x (270 x 270 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.
Facts and figures ALLROUNDER 27 S Distance between tie bars: 1.63 x 1.63 (27 x 27 mm) Clamping force: 28, 38, 44 tons Injection unit: 1.4 oz, 2.3 oz, 3.7 oz www.arburg.com 27 S Machine dimensions 78.35
More informationParts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX
Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome
More informationTable of Contents BDU Series Features and Benefits
Table of Contents BDU Series.............................................. 3-13 Features and Benefits..................................................................................3 How to Order.........................................................................................4
More information7600 Series Center Drive Conveyors
7600 Series Center Drive Conveyors Installation, Maintenance and Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866 TEL: 6-67-7600 Hartland, WI
More informationCONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP
CONVEYOR INSTALLATION MANUAL I VERSION 1 Rexnord TableTop and MatTop Chains Rexnord Roller Upgrade System REXNORD FLATTOP Rexnord Industries, LLC For more than one hundred years, Rexnord has provided superior
More informationFood Grade Positive Drive Line
Food Grade Positive Drive Line The Next Step in Belting SuperDrive The homogeneous PositiveDrive belt, recognized worldwide as the best choice where hygiene and conveying efficiency are essential. The
More informationParamax Series Control Ball Valve. Specification Data CM6004 7/97
Paramax Control Ball Valve Specification Data CM6004 7/97 Table of Contents Numbering System........................ 3 Specifications............................ 4 Seal Ring Limitations......................
More informationAdvised minimum width SLIDING ROLLERS SERIES 20
Pitch Drive system Belt width Advised minimum width Rod diameter 20 mm Central Multiples of 8 mm 120 mm Ø 4.6 mm FLAT TOP FLUSH GRID RAISED RIB FRICTION TOP SLIDING ROLLERS TRIAN SERIES 20 SERIES 20 SERIES
More informationOmni-Pro 120. USA and International Patents Pending
ASHWORTH ENGINEERING Committed to on-time delivery of defect-free products and services, fit for use, exactly as promised, every time. P R O D U C T T E C H N I C A L B U L L E T I N Omni-Pro 120 USA and
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni S-MP C page 3-6 uni S-MP CS 22% page 7-10 uni S-MP N page 11-14 Datasheet: uni
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 6100 Series Sanitary End Drive Conveyors Table of Contents Warnings General Safety......................... 2 Introduction.................................... 2
More informationChain return components
42 HD Polyethylene High Density Self-lubricating ROLLER 12303V 12303N 12307V 12307N 128V 128N 128V 128N 12 12 Cod. 12304N Cod. 12303V Cod. 12863N ROLLER 12895V 12895N 12896V 12896N 12897V 12897N 12862V
More informationALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
More informationFacts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
More informationInstallation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 7200/7300 Series Top Mount Drive Package for Heavy Load 90 Sanitary Gearmotors Table of Contents Warnings General Safety.................... 2 Introduction................................
More informationDavid Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiter
David Brown Sadiguard Torque Limiting Couplings Simply the best positive protection against overloads and jamming David Brown Sadiguard torque limiters positive action eliminates the inaccuracies of shearing
More informationULTIMA Ni-Cd BATTERY: PEAK PERFORMANCE WITH ULTRA LOW MAINTENANCE
ULTIMA Ni-Cd BATTERY: PEAK PERFORMANCE WITH ULTRA LOW MAINTENANCE ULTRA LOW MAINTENANCE Ni-Cd FOR WHEN SAFETY CANNOT BE COMPROMISED Developed in line with long proven nickel-cadmium technology, the Ultima
More information14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner
Parts Manual 14TTA-2311 Pistol Grip Clecomatic Clutch Nutrunner For additional product information visit our website at http://www.apextoolgroup.com Model Nomenclature A 14 T T A - 2311 Tool Series 14
More informationALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
More informationFood Grade Positive Drive Line
Food Grade Positive Drive Line The Next Step in Belting SuperDrive The homogenous PositiveDrive belt, recognized worldwide as the best choice where hygiene and conveying efficiency are essential. The unique
More informationAiretool. 999-C-45 ( ) Electric Rolling Motor. Operating & Service Manual PL EN 01/26/2012
Operating & Service Manual PL19-6009EN 999-C-45 (8405492) Electric Rolling Motor For additional product information visit our website at http://www.apextoolgroup.com PL19-6009EN Description Tool Specifications
More informationSERIES 54 PROXIMITY SENSORS
SERIES 54 PROXIMITY SENSORS SERIES 54 The Series 54 inductive proximity sensor provides position indication for quarter turn valves. The superior design offers reliable and durable valve monitoring and
More information