Installation and Set-Up Manual

Size: px
Start display at page:

Download "Installation and Set-Up Manual"

Transcription

1 MAXX LNX Power Center Mount Legrest Installation and Set-Up Manual NOTE: This manual contains important information related to the installation, set-up and adjustment of our Maxx Pivot Plus Legrests. Please forward to the Dealer, together with the TRx system, in order to properly address the specific needs of the client. TRD0341 Rev B

2 Important! The most important link in the delivery chain is the end user. The user must be satisfied with the product in terms of function, safety and aesthetics. No sale is complete unless the end user receives thorough training in all aspects of the care and use of the system. A complete instruction session with your customer is essential. Only the dealer and the health care professional can ensure that the system is set up properly and safely for the specific needs of the individual user.

3 - 3 - Important Information: Before You Begin! Safety Symbols: Safe and proper installation, set-up and adjustment of your Motion Concepts device depends upon your diligence in following the warnings, cautions and information provided in this Manual. The symbols below are used throughout all Motion Concepts manuals to identify warnings, cautions and important notes. It is very important for you to read and understand them completely. CAUTION! Failure to heed the cautions in this Manual may result in damage to your TRx Power Positioning System. WARNING! Failure to heed the warnings in this manual may result in personal injury. Important! Important information to remember when installing your TRx seating system. Please refer to Section 2.0 of the Motion Concepts Owner s Manual (TRD0000) (provided separately) for detailed safety information related to our Motion Concepts power positioning system and accessories Training Installation and set-up of the Maxx LNX Center Mount Legrest must only be done by a trained technician or healthcare professional. If you are not certified as an installer, please arrange immediately for training by a Motion Concepts technician or sales agent who has been certified to teach the installation and setup of the Maxx LNX Legrest. Every effort will be made to meet your training needs. Note: Before proceeding with the installation/set-up, please ensure that no pages are missing from this manual. Hardware Unless otherwise indicated, all the hardware required to complete the installation will be provided by Motion Concepts. Please refer to the Installation/Assembly Overview Drawing in Section 1.0 to determine the size, type and configuration of the hardware. Tools WARNING! The hardware supplied with all Motion Concepts accessories is high strength. Do not substitute hardware. Use only the hardware supplied. The following tools are required to complete the installation, adjustment & set-up: Wrenches and/or Socket Wrenches: 7/16, 12mm Hex Keys: 4mm, 5mm Standard Screwdriver

4 - 4 - GENERAL SAFETY WARNINGS IMPORTANT! Motion Concepts disclaims all responsibility for any personal injury or damage to property that occurs as a result of improper or unsafe use of the power positioning system or the wheelchair on which the system is installed. WARNING! The following guidelines should be adhered to while operating your Motion Concepts power positioning system to avoid injury and ensure safe operation: Never operate the tilt, elevate seat or power elevating legrest function while underneath a fixed object such as a table or desk. Never use the footplates as support during transfers. When transferring in or out of the seating system, ensure that footplates/foot platforms are in the flipped-up or swing-away position (where applicable). Never exceed the maximum allowable weight capacity for the Maxx LNX center mount legrest Never allow items (i.e.; posture belts, backpacks, coats, etc...) to be trapped under your seat when tilted, or beneath your power legrests when extended, otherwise damage to the system may occur. Always maintain a minimum of 3-inches between bottom of the front riggings and the floor/ground while the wheelchair is in motion to ensure proper ground clearance. Never allow your power center mount legrest to be used as a tie-down point in a vehicle. Use only the designated anchoring points on the power wheelchair. Never operate your power positioning system while driving your wheelchair. WARNING! Danger of injury by moving parts! To avoid personal injury and injury to other individuals from moving wheelchair parts such as wheels, power legrests, and/or tilt or elevate modules, always be aware of your surroundings, especially when children are present. Pinch points may occur during the operation of your power center mount legrest. Always keep hands and fingers clear of moving parts to avoid injury. WARNING! Risk of injury, tipping or damage When travelling down a ramp or incline, never attempt to drive with power elevating leg rests in the extended position. WARNING! Danger of injury if wheelchair and/or power positioning system is used in any other way than the purpose described in this manual! Only ever use the wheelchair/seating system in accordance with the instructions provided in this Owners Manual and your powerbase Owners/Operators Manual Pay strict attention to all safety information provided. WARNING! Any sudden or gradual deterioration in the function/performance of your power positioning system (i.e. increased actuator motor/gearbox noise, rattling, sloppiness, etc...) must be reported to your Dealer immediately. A complete wheelchair inspection by a qualified technician is recommended to ensure there is no unusual wear and tear, or physical damage that requires servicing and/or repair. WARNING! Risk of Injury or damage if correct or improper replacement (service) parts are used Replacement parts for your power positioning system MUST match original Motion Concepts parts WARNING! Do not substitute hardware All hardware used by Motion Concepts in the assembly and installation of our Power Positioning Systems is high strength. Use only the hardware supplied with your seating system. WARNING! Danger of accident and loss of guarantee if maintenance is insufficient! For reasons of safety and in order to avoid accidents which result from unnoticed wear, it is recommended that under normal operating conditions your power positioning system undergoes a complete bi-annual inspection

5 Malleable Calf Pad Maxx LNX Legrest - Assembly Overview Maxx LNX Center Mount Legrest Assembly Long knee-to-heel range shown Independent Curved Calf Pads Cast Foot Platform short knee-to-heel range shown (Note: Legrest Receivers are not shown) Individual Foot Plates

6 Maxx LNX Legrest - Adjustment Overview 2.1 MAXX LNX: Adjustment Overview The maximum user weight capacity for the Maxx LNX center mount legrest is 300 lbs/136 kgs. The Maxx LNX is installed onto the system seat frame or seat side rails via the legrest receivers. The initial (retracted) legrest angle may be set-up to one of three optional configurations. The mounting holes used in the upper legrest crosstube will establish the initial legrest angle (as illustrated in Figure 1A below). The Maxx LNX legrest geometry provides up to 9" of virtual articulation at full extension. The angle at full extension will vary depending on the initial legrest angle (refer to Figure 1B below). FIGURE 1A. INITIAL LEGREST ANGLE SET-UP* A. Initial Angle (+7 ) B. Initial Angle (90 ) A. B. C. Initial Angle (-7 ) C. *When Legrest is Fully Retracted FIGURE 1B. LEGREST ARTICULATION/EXTENSION Legrest geometry provides virtual articulation up to 9 Note: The final legrest angle (at full extension) will vary depending on the intial legrest angle

7 Maxx LNX Legrest - Adjustment Overview 2.1 MAXX LNX: Adjustment Overview (...cont d) The Maxx LNX Legrest is designed to provide infinite knee-to-heel (KTH) adjustment within the established range of the extension bracket. There KTH range available on the Maxx LNX legrest is 13 to 19. Each Maxx LNX legrest may be configured with either a centermount platform (Figure 2.), or individual footplates (Figure 3.). All foot plate/platform options allow adjustment to the footplate angle, while the individual footplates also allow for an offset/bi-level configuration if desired. FIGURE 2. MAXX LNX LEGREST W/ CENTER MOUNT Cast Foot Platform Aluminum Platform w/ Heel Strap* *note: available in a variety of heel strap & platform sizes FIGURE 3. MAXX LNX LEGREST W/ INDIVIDUAL FOOTPLATES UNI-LEVEL Footplate Configuration BI-LEVEL Footplate Configuration

8 Maxx LNX Legrest Installation & Set-Up 3.1 MAXX LNX: Basic Legrest Set-Up The basic set-up of the Maxx LNX legrest is intended to ensure that the users feet remain properly supported in both the retracted and extended legrest position. The basic set-up is performed in two simple steps. Step 1. Retracted Position: With the legrest retracted and the user properly seated in the chair, adjust the knee-to-heel (KTH) of the legrest assembly to optimize the comfort/ positioning of the clients legs. Once the KTH is set, the legrest should then be fully extended with the user still seated in the chair. Step 2. Extended Position: While extended, adjust the depth of the Maxx LNX assembly inward or outward (as needed) so that the footplate just makes contact with the users feet 1 (refer to section B. Maxx LNX Depth/Articulation Adjustments). Re-tighten the legrest receivers to secure the legrest into position. 1 IMPORTANT! when the legrest is fully extended, ensure the clients feet are supported at the heel by the foot plate/platform, as well as the calf pad(s). Knee-to-Heel Legrest Depth Adjustment Adjustment** 1 2 Extension Bracket Range of Adjustment (13-19 ) **Note: Depth/Articulation Adjustments will differ depending on the type of seating system maintain a minimum 3 ground clearance when wheelchair s in motion 3.2 MAXX LNX: Comfort Adjustments In addition to the basic set-up (KTH and Legrest Depth adjustments), it may also be necessary/desireable to make additional adjustments to the legrest assembly to meet the specific needs of the client. The following Sections A. thru E. illustrate all the available Maxx LNX legrest adjustments in greater detail. A. KNEE-TO-HEEL (KTH) ADJUSTMENT: KTH set-up is controlled via the legrest extension bracket. Split footplates utilize two individual extension brackets (to allow independent footplate adjustment), while the centermount foot platform utilizes a onepiece extension bracket. The slotted channel in the bracket allows for infinite KTH adjustability within the available channel length: LNX Extension Bracket/ KTH Range = 13 to 19 KTH WARNING! Always maintain a minimum of 3-inches between bottom of the front riggings and the floor/ground while the wheelchair is in motion to ensure proper ground clearance. If necessary, elevate the front rigging or tilt the seat to achieve proper ground clearance.

9 A. KNEE-TO-HEEL ADJUSTMENTS (... cont d) Maxx LNX Legrest Installation & Set-Up I. Individual Footplate: Uni-Level KTH Adjustments Each individual footplate is installed onto its own separate extension bracket. Two sets of mounting screws are requiredper extension bracke. The extension brackets/kth is adjusted via the upper 2 screws on the extension bracket (refer to image i.) To maintain strength and stability at longer KTH settings, the spacer block must be installed at the bottom of the extension bracket (see image ii). i. Adjustment Screws ii. Spacer Block KTH Range 13 to 19 Note: Front shroud, cosmetic trim and calf pads are not shown for illustration purposes. II. Individual Footplate: Bi-Level KTH Adjustments The separate extension brackets allow each footplate to be adjusted independently for bi-level (offset) configurations. For bi-level set-up, it is recommended that the footplates be first set to the shortest KTH height. With the shorter KTH set, adjust the opposite footplate to the longer KTH position (see images iii. and iv.). With the footplates/extension brackets set to their desired KTH lengths, re-tighten all 4 screws to secure the footplates into place. IMPORTANT! In a bi-level configuration, the spacer block should remain aligned with the higher footplate (i.e.; shorter KTH)- as indicated below. iii. loosen 2 upper screws Note: Front shroud and calf pads are not shown for illustration purposes iv. Adjust the offset footplate/ bracket to desired KTH length and re-tighten screws Individual Footplate Loosen lower screws in the spacer block Refasten spacer block at the shorter KTH

10 Maxx LNX Legrest Installation & Set-Up A. KNEE-TO-HEEL ADJUSTMENTS (... cont d) III. Centermount Platform KTH Adjustments The centermount foot platform is installed onto a one-piece extension bracket. The extension bracket/knee-to-heel (KTH) length is adjusted via the upper adjustment screws on the extension bracket (refer to image v.) The spacer block remains installed at the bottom of the extension bracket for added strength/stability. Note: Front shroud and calf pads are not shown for illustration purposes. v. KTH Range 13 to 19 Adjustment Screws Center Mount Platform WARNING! Always maintain a minimum of 3-inches between bottom of the front riggings and the floor/ground while the wheelchair is in motion to ensure proper ground clearance. If necessary, elevate the front rigging or tilt the seat to achieve proper ground clearance. IV. Cosmetic Trim Each LNX legrest comes with a strip of Cosmetic Trim that can be installed in order to cover the exposed edges along the extension bracket, and improve the overall aesthetics of the LNX legrest. To Install: Once the final KTH length is determined, cut the cosmetic trim to the desired length and press the strip into the slots at the front of the spacer block and the main body (extrusion). (see images below) Cosmetic Trim Spacer Block Main Body Trim Installed Measure and cut trim to length Press trim into place

11 Maxx LNX Legrest Installation & Set-Up B. MAXX LNX DEPTH/ARTICULATION ADJUSTMENTS: If the footplate correctly supports the feet in the retracted position, but not in the extended position, then an articulation adjustment is required. This adjustment is made by changing the legrest depth. Depending on the type of seat frame, it is accomplished in two ways: WARNING! Risk of Serious Injury or Loss of Stability. Adjustments involving the legrest depth and seat depth may have a significant effect on the overall stability of the wheelchair. The final set-up should be determined based on the stability and driveability requirements of the end user. We recommend that depth adjustments only be performed by a trained technician or healthcare professional. NOTE: If you have any questions or concerns regarding depth adjustments to the Maxx LNX legrest, please contact our Customer Service Department for assistance I. LNX Depth Adjustable Legrest Receivers: (FOR CLASSIC SEATING SYSTEMS) For Motion Concepts seating systems fitted with our classic square tube side frames, the overall depth of the Maxx LNX Legrest is controlled via two depth adjustable legrest receivers. To adjust the depth of the Maxx LNX, loosen the locking screw on each seat side frame and slide both legrest receivers in or out (equally) to the desired position/ depth (refer to image i.) The adjustable depth receivers offer infinite depth adjustment within the channel length on the receiver. legrest receiver i. seat side frame locking screw Depth Adjustment (Classic Side-Frames) II. LNX Legrest Depth/Articulation Adjustment with Ultra-Rails: LNX Legrest depth/articulation adjustments (up to 7/8 (22mm)) can be made via the adjustment screws at the front of each seat side frame/ultra-rail. Crossbar Ultra-Rail Depth/Articulation Adjustment LNX Maxx CM Legrest Note: Lower LNX Legrest assembly is not shown

12 Maxx LNX Legrest Installation & Set-Up II. LNX Legrest Depth/Articulation Adjustment with Ultra-Rails: (...cont d) WARNING! Risk of injury and/or property damage DO NOT remove the safety set-screw located inside the adjustment slots. The set-screw helps to prevent the LNX CM Legrest from disengaging from the wheelchair in the event of a sudden impact or collision. Depth Adjustments: 1. Using a 5mm (3/16 ) hex key, loosen the screws inside the adjustment slot at the front of the left and right ultra-rails (1). 2. Carefully slide the LNX legrest assembly (cross bar) inward or outward (2) until the desired position is achieved. 3. Following the articulation adjustment, tighten the adjustment screw(s)* on each side of the LNX Legrest to secure it in place. *Note: in the more rearward positions, only one adjustment screw (per side) will remain visible (3). IMPORTANT! Ensure at least one adjustment screw is always visible on each side of the LNX Maxx Legrest, and that all visible screws are fully secured Articulation Adjustment Screws (x2) Maximum Forward Adjustment Safety Set-Screw Note: Left side adjustment shown Adjustment Slot Ultra-Rail Range of Adjustment = 22mm (7/8 ) Maximum Rearward Adjustment C. CALF PAD ADJUSTMENTS: I. Malleable Calf Panel The malleable calf panel provides a greater level of support without the need for a multitude of adjustments. This unique one-piece calf panel utilizes a bendable steel inner skeleton that is molded directly into the foam pad. The calf panel can be manipulated/shaped (by hand) to match the contour of the clients legs. The malleable calf panel installs in a fixed position on the legrest assembly. (refer to images below). Malleable Calf Panel Fixed Mounting Position (2 screws) bendable steel inner skeleton

13 Maxx LNX Legrest Installation & Set-Up II. Independent Curved Calf Pads The overall height/ position of the curved calf pads on the legrest assembly can be adjusted via the calf pad mounting plate (both pads are adjusted at once)- see images below. To adjust the mounting position of the calf pads, loosen the two mounting screws on the front shroud cover, and slide the calf pads up or down via the slot in the mounting plate. The mounting plate provides a 1-1/4 (32mm) range of vertical adjustment. Independent Curved Calf Pad Calf Pad Mounting Plate height adjustment slots shroud/cover The independent calf pads are installed via a mounting bracket into the side tabs of the calf pad mounting plate. The calf pads may be configured (independently) in one of three mounting positions (depths) on the mounting plate (3/8 (9.5mm) increments) as illustated in the images below. Calf Pad/ Bracket Installation mounting bracket Calf Pad Depth Adjustment 3/8 increments REAR VIEW mounting plate Curved calf pads may also be adjusted independently on their respective mounting bracket using the mounting screws at the rear of the calf pads. The calf pads may be mounted in numerous configurations to ensure a high level of comfort for the client- sample configurations are illustrated below. Independent Calf Pad Adjustment (Sample Configurations): Centered Extended Position (maximum) Lowered Offset Raised Offset Angled

14 I. Individual Footplate- Angle Adjustment Maxx LNX Legrest Installation & Set-Up D. FOOTPLATE ANGLE ADJUSTMENTS The Split Footplates (Bi-Level or Uni-Level) can be independently adjusted to set the desired footplate angle for each footplate. The angle of the Center Mount Platform is also adjusted via a button head screw at the rear of the foot platform. Once set, these footplate angles will remain consistent throughout the extension and retraction of the legrest assembly. The angle* of each individual footplate is adjusted via the button head screw in the mounting bracket at the rear of each footplate (Refer to images below). To set the maximum upward footplate angle, fully extend the set screw (ensure there is adequate screw thread remaining in the footplate to hold it in place). To maximize the downward footplate angle, the screw may be completely removed. *Note: The final angle of the footplate(s) will be dictated by the initial angle set up of the Maxx LNX Legrest - see Section 2.1 Footplate Angle Adjustment Maximized Upward Angle (with set screw fully extended) Button Head Screw 25 ο range (approx.) INSIDE VIEW (left footplate) Maximized Downward Angle (with set screw removed) II. Individual Footplate- Width Adjustment The width of each individual footplate can be adjusted relative to its corresponding extension bracket by varying the orientation of the mounting hardware. The adjustable mounting hardware consists of a main bolt and four (4) 1/4 (6mm) spacers. Each footplate may be adjusted independently by changing the location/ position of the spacers along the mounting bolt- as illustrated in images i. - v. below. e.g.; Width Adjustment (+1/4 (6mm)) Extension Bracket 1/4 (6mm) Spacers Short KTH model shown i. Standard (Narrow)

15 Maxx LNX Legrest Installation & Set-Up II. Individual Footplate- Width Adjustment (...cont d) ii. Medium Narrow (+1/4 (6mm) per side) iii. Medium (+1/2 (13mm) per side) iv. Medium Wide (+3/4 (19mm) per side) v. Wide (+1 (26mm) per side) III. Center Mount Platform- Angle Adjustment The angle* of the center mount platform is determined by an adjustable button head screw at the rear of the foot platform (refer to images below). To set the maximum upward footplate angle, fully extend the button head screw (ensuring there is adequate screw thread remaining in the foot platform to hold it in place). To maximize the downward foot platform angle, the screw may be completely removed. *Note: the final angle of the foot platform will be dictated by the initial angle set up of the Maxx LNX Legrest- see Section 2.1 Foot Platform Angle Adjustment Maximized Upward Angle (set screw fully extended) 22 ο range (approx.) Maximized Downward Angle (set screw removed) button head screw TOP VIEW

16 USA 700 Ensminger Rd. Suite 112 Tonawanda, NY, USA Canada 84 Citation Dr. Units 1-3 Concord, Ontario, Canada L4K 1C

Maxx LNX Power Center Mount Legrest

Maxx LNX Power Center Mount Legrest Maxx LNX Power Center Mount Legrest Installation, Set-Up & Adjustment TRD0341 Rev A - 2 - - 3 - Important! The most important link in the delivery chain is the end user. The user must be satisfied with

More information

Installation and Set-Up Manual

Installation and Set-Up Manual MAXX PIVOT PLUS LEGREST (for Manual and Power Legrest Models) Installation and Set-Up Manual NOTE: This manual contains important information related to the installation, set-up and adjustment of our Maxx

More information

- 3 - Important! Note: Before proceeding with the installation/ set-up, please ensure that no pages are missing from this manual.

- 3 - Important! Note: Before proceeding with the installation/ set-up, please ensure that no pages are missing from this manual. Centermount Extending Articulating (CMX) Legrest Installation, Set-Up & Adjustment User Manual TRD0272- CMX Legrest Set-Up/ Adjustment Manual, Rev 2.1- February 5, 2010 - 2 - - 3 - i Important! The most

More information

i NOTE: This installation manual contains important set-up and adjustment information. Please forward to the Dealer, together with the TRx system, in

i NOTE: This installation manual contains important set-up and adjustment information. Please forward to the Dealer, together with the TRx system, in Multi-Axis Armrest Mount Installation & Set-Up Manual i NOTE: This installation manual contains important set-up and adjustment information. Please forward to the Dealer, together with the TRx system,

More information

i NOTE: This installation manual contains important information related to set-up

i NOTE: This installation manual contains important information related to set-up TRx Heavy-Duty Swing Away Legrests Installation and Set-Up Manual i NOTE: This installation manual contains important information related to set-up and adjustments. Please forward to the Dealer, together

More information

Matrx Back Interface for the

Matrx Back Interface for the Matrx Back Interface for the Quantum Tru-Balance 3 Seating System Installation Instructions TRD0357, Rev A Important Symbols in this Manual Setting up and operating your wheelchair safely depends on your

More information

ATTENTION DEALERS i Important Information on Tilt Actuator Warranty Claims: Dealers must contact our Technical Service Department prior to installing

ATTENTION DEALERS i Important Information on Tilt Actuator Warranty Claims: Dealers must contact our Technical Service Department prior to installing Installation/ Replacement Instructions for the Ultra-Low CG Tilt and Recline s ATTENTION DEALERS i Important Information on Tilt Warranty Claims: Dealers must contact our Technical Service Department prior

More information

ELITE HEAVY-DUTY BACK

ELITE HEAVY-DUTY BACK WARRANTY Every Matrx Elite HD back is carefully inspected and tested to provide optimum performance. Each back is guaranteed to be free from defects for a period of 24 months from the date of purchase,

More information

Support Harness Mounting Bracket Assembly for the

Support Harness Mounting Bracket Assembly for the Support Harness Mounting Bracket Assembly for the Matrx PB and Matrx Elite Back Cushion Installation & Set-up Manual DEALER: This manual contains important Safety, Installation and Set-up information specific

More information

i IMPORTANT! The installation instructions contained in this manual should only be carried out by a qualified technician. INSTALLATION/USER MANUAL

i IMPORTANT! The installation instructions contained in this manual should only be carried out by a qualified technician. INSTALLATION/USER MANUAL i IMPORTANT The installation instructions contained in this manual should only be carried out by a qualified technician. INSTALLATION/USER MANUAL i IMPORTANT TRANSPORTING THE CLIENT WITHIN A WHEELCHAIR

More information

Lateral Hip Support INSTALLATION & SET-UP MANUAL. (with Fixed or Removable Hardware) Lateral Hip Support- Fixed Assembly

Lateral Hip Support INSTALLATION & SET-UP MANUAL. (with Fixed or Removable Hardware) Lateral Hip Support- Fixed Assembly Lateral Hip Support (with Fixed or Removable Hardware) Lateral Hip Support- Fixed Assembly Lateral Hip Support- Removable Assembly (Note: assemblies diagrams are shown for left side only) INSTALLATION

More information

MOTION CONCEPTS OWNERS MANUAL

MOTION CONCEPTS OWNERS MANUAL MOTION CONCEPTS Power Positioning System OWNERS MANUAL (for Ultra-Low Classic and Ultra-Low Maxx (Modular) Systems) DEALER: This manual contains important safety, maintenance and operating information

More information

User Manual. Invacare Matrx Genera Back. Model Number GB. 1 General

User Manual. Invacare Matrx Genera Back. Model Number GB. 1 General User Manual DEALER: This manual MUST be given to the user of the product. USER: BEFORE using this product, read this manual and save for future reference. Invacare Matrx Genera Back Model Number GB 1 General

More information

SERVICE MANUAL SEDEO PRO+ VERSION

SERVICE MANUAL SEDEO PRO+ VERSION SERVICE MANUAL EN SEDEO PRO+ VERSION - 05 Sedeo Pro+ 05 Handicare All rights reserved. The information provided herein may not be reproduced and/or published in any form, by print, photo print, microfi

More information

REACH USER MANUAL USER: READ THIS MANUAL BEFORE USING THIS DEPENDENT MOBILITY BASE AND SAVE FOR FUTURE REFERENCE

REACH USER MANUAL USER: READ THIS MANUAL BEFORE USING THIS DEPENDENT MOBILITY BASE AND SAVE FOR FUTURE REFERENCE USER MANUAL CHAIR PROVIDER: THIS MANUAL MUST BE GIVEN TO THE USER OF THIS DEPENDENT MOBILITY BASE USER: READ THIS MANUAL BEFORE USING THIS DEPENDENT MOBILITY BASE AND SAVE FOR FUTURE REFERENCE Revision

More information

18 Wide. MRI Transport Wheelchairs. Overall Width: 26 Wheelchair, With Fixed Footrest. Specifications:

18 Wide. MRI Transport Wheelchairs. Overall Width: 26 Wheelchair, With Fixed Footrest. Specifications: MRI Transport Wheelchairs 18 Wide Overall Width: 26 Wheelchair, With Fixed Footrest Removable Full Length Padded Arms Fixed Footrests Seat To Floor Height: 19 1/4 Seat Width: 18 Overall Width: 26 Overall

More information

510 REV04 REV DATE: 09/2/2014 USER MANUAL

510 REV04 REV DATE: 09/2/2014 USER MANUAL 510 REV04 REV DATE: 09/2/2014 USER MANUAL CONTENTS 1 General... 4 Operating Safety Warnings... 5 Features... 6 Safety Inspection Checklist... 7 Troubleshooting... 9 Labels... 10 2 Front Riggings... 11

More information

Rodeo Upgrades Q2 2014

Rodeo Upgrades Q2 2014 Rodeo Upgrades Q2 2014 New Rodeo Convaid is excited to announce new standard features and accessory options on the Rodeo Tiltin-Space Wheelchair. All new orders received as of June 19 2014 will have all

More information

INSTALLATION/USERS MANUAL

INSTALLATION/USERS MANUAL INSTALLATION/USERS MANUAL ! IMPORTANT: The installation and set up instructions should be carried out by a qualified technician. IMPORTANT: It is important to refer to the wheelchair owner s manual for

More information

AL625 & AL625HD INSTALLATION & OWNER S MANUAL

AL625 & AL625HD INSTALLATION & OWNER S MANUAL AL625 & AL625HD INSTALLATION & OWNER S MANUAL These instructions are provided to assist you in the installation of the AL625. If you require further assistance, our trained staff is ready to provide you

More information

USER MANUAL PRODUCT CODE: WC CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE PAGE 1

USER MANUAL PRODUCT CODE: WC CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE PAGE 1 by USER MANUAL PRODUCT CODE: WC01059 CareCo (UK) Ltd, Hubert Road, Brentwood, Essex, CM14 4JE PAGE 1 CONTENTS 1. INTRODUCTION 2. IDENTIFICATION OF PARTS 3. SAFETY REGULATIONS 4. SAFETY WARNINGS 5. USER

More information

9.0 - Preventive Maintenance:

9.0 - Preventive Maintenance: 9.0 Preventive Maintenance - 125 - In an effort to assist technicians during service or maintenance on an installed seating system, wherever possible, Motion Concepts has designed our TRx power positioning

More information

K710 Product Manual. Support Station. K710 Product Manual

K710 Product Manual. Support Station. K710 Product Manual K710 Product Manual Support Station K710 Product Manual Contents Important information 2 Safety messages 3 Recommended use 4 Item dimensions 5 Check your order 6 Installation 6 Basic components 7 Accessories

More information

Quick Release Mounting Hardware

Quick Release Mounting Hardware Mounting Hardware USER MANUAL Quick Release Mounting Hardware Stealth s User Manual and Maintenance Guide for ADI s Quick Release Mounting Hardware Customer Satisfaction 1.0 Stealth Products strives for

More information

Wallaby Wheelchair. Item #s: WB1200-2GFR, WB1400-2GJB. Accessories WB ELR - Elevating Leg Rests WB Headrest Extension STDS833N - Anti-Tippers

Wallaby Wheelchair. Item #s: WB1200-2GFR, WB1400-2GJB. Accessories WB ELR - Elevating Leg Rests WB Headrest Extension STDS833N - Anti-Tippers by Wallaby Wheelchair Item #s: WB1200-2GFR, WB1400-2GJB Accessories WB ELR - Elevating Leg Rests WB 8021 - Headrest Extension STDS833N - Anti-Tippers EU Authorized Representative Drive Medical LTD Introduction

More information

CONTENTS: 5740AH - 40 Ton Air/Hydraulic Shop Press 5750AH - 50 Ton Air/Hydraulic Shop Press OWNER'S MANUAL

CONTENTS: 5740AH - 40 Ton Air/Hydraulic Shop Press 5750AH - 50 Ton Air/Hydraulic Shop Press OWNER'S MANUAL OWNER'S MANUAL CONTENTS: Page 1 Specifications 2 Safety Information and Warranty Information 3 Parts List 4-6 Assembly Instructions 7 Pump and Ram Assembly Instructions 8 Procedure for Bleeding Air 9 Pump

More information

RESTWELL RISE & RECLINE ARMCHAIRS LARS AND SVEN - OWNER S HANDBOOK MODEL DESCRIPTION

RESTWELL RISE & RECLINE ARMCHAIRS LARS AND SVEN - OWNER S HANDBOOK MODEL DESCRIPTION RESTWELL RISE & RECLINE ARMCHAIRS LARS AND SVEN - OWNER S HANDBOOK CONTENTS 1. Introduction 2. Model Description 3. Parts Description 4. Personal Safety 5. Installation Instructions 6. Operating Instructions

More information

9000 Series, 9000P, and Jymni Anti-tipper Installation

9000 Series, 9000P, and Jymni Anti-tipper Installation 9000 Series, 9000P, and Jymni Installation Adjustable Kit Nos. 1058752, 1058836, 1064520 and 1101960, Non adjustable Kit Nos. 1113764, 1113765 and 1113766 en 9000 Series, 9000P and Jymni s User Manual

More information

XXL-Rehab Minimaxx Folding Wheelchair

XXL-Rehab Minimaxx Folding Wheelchair user manual user manual user manual user manual user manual user manual L-Rehab Minimaxx Folding Wheelchair Strongly engineered and functionally designed exclusively for bariatric users! Push handle Back

More information

Assembly & Installation Instructions

Assembly & Installation Instructions TM P R O D U C T S Assembly & Installation Instructions FOR 28 SERIES SNOWPLOW PIVOT ASSEMBLY AND FLOAT LIMITER 99103000 FOR SERIAL NUMBERS 28D100000 TO 28D100770 97100552A 1. THINK SAFETY, ALWAYS WEAR

More information

INSTRUCTION MANUAL STANDING WHEELCHAIR. KARMAN HEALTHCARE INC. City of Industry, CA

INSTRUCTION MANUAL STANDING WHEELCHAIR. KARMAN HEALTHCARE INC. City of Industry, CA INSTRUCTION MANUAL STANDING WHEELCHAIR KARMAN HEALTHCARE INC. City of Industry, CA 91748 www.karmanhealthcare.com **Karman Healthcare Inc. Recommends Patient Seek Physicians Counsel Before Purchase TABLE

More information

MINOS GLOBAL ALU User Manual

MINOS GLOBAL ALU User Manual MINOS GLOBAL ALU User Manual Think Global Introduction Thank you for choosing a MINOS wheelchair. Our company is young but we have broad experience in the sector. The wheelchair you have just bought is

More information

SERVICE MANUAL. Seat system for electric wheelchair

SERVICE MANUAL. Seat system for electric wheelchair SERVICE MANUAL US VS Seat system for electric wheelchair How to contact Permobil Permobil Inc. USA 6961 Eastgate Blvd. Lebanon, TN 37090 USA Phone: 800-736-0925 Fax: 800-231-3256 Email: info@permobilusa.com

More information

R310, R320, R330, R340 & R350 Product Manual. Compass Chair. R310, R320, R330, R340 & R350 Product Manual

R310, R320, R330, R340 & R350 Product Manual. Compass Chair. R310, R320, R330, R340 & R350 Product Manual R310, R320, R330, R340 & R350 Product Manual Compass Chair R310, R320, R330, R340 & R350 Product Manual Contents Important information 3 Safety messages 4 Recommended use and item dimensions 5 Check your

More information

Synergy TRU-Balance BASIC OPERATION INSTRUCTIONS. Power Tilt. Front Riggings ACN#

Synergy TRU-Balance BASIC OPERATION INSTRUCTIONS. Power Tilt. Front Riggings ACN# Synergy TRU-Balance BASIC OPERATION INSTRUCTIONS Power Tilt ACN# 088 609 661 2 SAFETY GUIDELINES Basic Operation Instructions WARNING! An authorized Pride Provider or a qualified technician must perform

More information

Jupiter. Uncompromised comfort and postural support in keeping with a contemporary home setting

Jupiter. Uncompromised comfort and postural support in keeping with a contemporary home setting Jupiter Uncompromised comfort and postural support in keeping with a contemporary home setting Jupiter Jupiter is the ideal home use chair for children through to adults, that combines comfort with superior

More information

Apollo Tilt Wheelchair 18" and 20" Instruction Manual

Apollo Tilt Wheelchair 18 and 20 Instruction Manual Apollo Tilt Wheelchair 18" and 20" Instruction Manual Table of Contents Contents Table of Contents... 2 Introduction... 3 Warning... 4 Safety Guidelines... 5 Parts of the Tilt Wheelchair... 6 Setup & Operation...

More information

Owner s Operations Manual

Owner s Operations Manual Owner s Operations Manual AQUA REHAB TILT COMMODE Future Mobility Healthcare Inc. 3223 Orlando Drive Mississauga, ON L4V 1C5 905 671-1661 1 888 737-4011 Fax: 1-888-670-3377 e-mail: customersupport@future-mobility.com

More information

Advancement Chair. R901, R902, & R903 Product Manual

Advancement Chair. R901, R902, & R903 Product Manual Advancement Chair R901, R902, & R903 Product Manual Contents Warnings and Important Information 3 Recommended Use 4 User and Item Dimensions 4 Assembly and Adjustment Information 5 Maintenance 14 Cleaning

More information

Installation Guide Philips MP90 VHM Wall Mount Kit

Installation Guide Philips MP90 VHM Wall Mount Kit Installation Guide Philips MP90 VHM Wall Mount Kit The purpose of this guide is to describe the procedures for installing the MP90 VHM Wall Mount Kit. Table of Contents Section 1.0: Mounting the VHM-Series

More information

Owners Manual POWER PLUS MOBILITY OUR PRODUCTS WILL MOVE YOU

Owners Manual POWER PLUS MOBILITY OUR PRODUCTS WILL MOVE YOU Owners Manual POWER PLUS MOBILITY OUR PRODUCTS WILL MOVE YOU At Power Plus Mobility, we care! Thank you for choosing a wheelchair from Power Plus Mobility Inc. We are always improving in our ways to serve

More information

HOW TO RELEASE/ REATTACH BACK SUPPORT ACTUATOR AND GAS SPRING

HOW TO RELEASE/ REATTACH BACK SUPPORT ACTUATOR AND GAS SPRING Welcome to the quick reference guide for the Quickie SmartSeat. This guide was created to assist you in the set-up of your SmartSeat.The Quickie SmartSeat with Intelli-motion represents a breakthrough

More information

Mx1 SuperLite Mount. Back Cushion. Installation/User Manual

Mx1 SuperLite Mount. Back Cushion. Installation/User Manual Mx1 SuperLite Mount Back Cushion Installation/User Manual DEALER: This manual contains important safety, Installation and Set-up information specific to the Invacare Matrx Mx1 SuperLite Mount Back. This

More information

9000 Topaz Wheelchair

9000 Topaz Wheelchair Owner s Operator and Maintenance Manual 9000 Topaz Wheelchair DEALER: This manual MUST be given to the user of the wheelchair. USER: BEFORE using this wheelchair, read this manual and save for future reference.

More information

SERVICE MANUAL. Stander. Seat Assembly for Permobil Power Wheelchair

SERVICE MANUAL. Stander. Seat Assembly for Permobil Power Wheelchair SERVICE MANUAL US Stander Seat Assembly for Permobil Power Wheelchair How to contact Permobil Permobil Inc. USA 6961 Eastgate Blvd. Lebanon, TN 37090 USA Phone: 800-736-0925 Fax: 800-231-3256 Email: info@permobilusa.com

More information

Lower Extremities USER MANUAL RLSHW100. Stealth s User Manual and Maintenance Guide for Residual Limb Support

Lower Extremities USER MANUAL RLSHW100. Stealth s User Manual and Maintenance Guide for Residual Limb Support Lower Extremities USER MANUAL RLSHW100 Stealth s User Manual and Maintenance Guide for Residual Limb Support Customer Satisfaction 1.0 Stealth Products strives for 100% customer satisfaction. Your complete

More information

US208S Scooter / Power Chair Carrier Lift N Go 117 Mini Electric Lift Electric Tote & 130 Swing Away Installation Guide & Owners Manual

US208S Scooter / Power Chair Carrier Lift N Go 117 Mini Electric Lift Electric Tote & 130 Swing Away Installation Guide & Owners Manual 7325 Douglas Rd. Lambertville, MI 48144 Phone: 1-800-541-3213 Fax: (734) 568-6705 www.wheelchaircarrier.com E-mail: admin@wheelchaircarrier.com US208S Scooter / Power Chair Carrier - 210 Lift N Go 117

More information

VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate

VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) and VHM-PL (Locking) Variable Height Arm with Slide-In Mounting Plate (Refer to qualified

More information

Universal Pitch Adjustable Wall Mount For Flat Panel Display UPM-2401

Universal Pitch Adjustable Wall Mount For Flat Panel Display UPM-2401 INSTALLATION INSTRUCTIONS Universal Pitch Adjustable Wall Mount For Flat Panel Display UPM-2401 Your new Chief Universal Pitch-Adjustable Wall Mount (UPM-2401) is a quick disconnect mounting system with

More information

Owner s Manual. Bariatric Manual Wheelchairs. Specializing in Bariatric Patient Aids

Owner s Manual. Bariatric Manual Wheelchairs. Specializing in Bariatric Patient Aids Owner s Manual Bariatric Manual Wheelchairs 700 LB CAPACITY XL Series Wheelchair by ConvaQuip Specializing in Bariatric Patient Aids P.O. Box 3417 * Abilene, TX 79604 U.S.A. Toll 800/637-8436 * FAX 325/677-7217

More information

Invacare Ultra Low Maxx by Motion Concepts

Invacare Ultra Low Maxx by Motion Concepts Invacare Ultra Low Maxx by Motion Concepts Supplement to power wheelchair user manual en Modular Non-Powered and Powered Positioning System User Manual This manual MUST be given to the user of the product.

More information

TDX SP2. Modern Design Meets Timeless Performance in the Next Generation of TDX (Total Driving experience) Call to order invacare.

TDX SP2. Modern Design Meets Timeless Performance in the Next Generation of TDX (Total Driving experience) Call to order invacare. I N VA C A R E TDX SP2 POWER WHEELCHAIR Modern Design Meets Timeless Performance in the Next Generation of TDX (Total Driving experience) The Invacare TDX SP2 Power Wheelchair with Maxx Positioning System

More information

Stowe Cargo Management System

Stowe Cargo Management System Installation Guide Stowe Cargo Management System Table of Contents 1. Pre-Installation (Page 2) a. Notes, Installation Kit contents & Tools needed 2. How to Install the Stowe Cargo Management System (Pages

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. R p. 1 of 16 INSTALLATION & OWNER S MANUAL V4211 HARD SIDED CAB KIT and/or V4275 CAMO HARD SIDED CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner.

More information

Owner s Operations Manual AQUA REHAB COMMODE.

Owner s Operations Manual AQUA REHAB COMMODE. Owner s Operations Manual AQUA REHAB COMMODE Future Mobility Products - One Buffalo River Place,Buffalo, NY 14210 1-855-938-8873 1-716-783-9130, fax 1-716-783-9236 www.futuremobility.com AQUA REHAB COMMODE

More information

FGSH-450 by Prism Medical

FGSH-450 by Prism Medical FGSH-450 by Prism Medical Introduction... 2 Overview... 2 Components of the Floor Lift... 3 Specifications... 4 Cautions... 5 Shipping & Transportation Instruction... 6 Assembly Instruction......7 Operation

More information

USA CANADA.

USA CANADA. CANADA Motion Concepts 84 Citation Dr., Unit 1-7 Concord, ON L4K 3C1 Toll Free Tel: 1.866.748.7943 Tel: 905.695.0134 Fax: 905.695.0138 USA Motion Concepts 700 Ensminger Rd., Suite 112 Tonawanda, NY 14150

More information

Prime Engineering GRANSTAND II

Prime Engineering GRANSTAND II OWNER S MANUAL PRODUCT PHOTO PARTS LIST ASSEMBLY INSTRUCTIONS FITTING & ADJUSTING DAILY USAGE ACCESSORIES MAINTENANCE WARRANTY Prime Engineering GRANSTAND II Manufactured By Prime Engineering A Division

More information

For who you are & what you need...

For who you are & what you need... For who you are & what you need... ProCare IC REV 1 1209 AMG Medical Inc. Alpharetta, GA 30022 1-866-321-4846 Montreal, QC H4T 1V5 1 (800) 363-2381 www.amgmedical.com Dealer: this manual must be given

More information

ASSEMBLY / OPERATION INSTRUCTIONS. Low Profile Motorcycle Dolly

ASSEMBLY / OPERATION INSTRUCTIONS. Low Profile Motorcycle Dolly ASSEMBLY / OPERATION INSTRUCTIONS 1,500LB CAPACITY Low Profile Motorcycle Dolly Model: 03-CG1500-01(B1) WARNING BEFORE USE PLEASE READ ALL WARNINGS AND INSTRUCTIONS TO PREVENT SERIOUS INJURY Drop-Tail

More information

Condor Manual. Corporation

Condor Manual. Corporation Condor Manual Corporation PREFACE IMPORTANT, PLEASE READ CAREFULLY Thank you for your purchase with Amico Accessories Inc. This unit is designed for long lasting performance, providing the end user complies

More information

INSTALLATION & OWNER S MANUAL

INSTALLATION & OWNER S MANUAL Rev. L p. 1 of 16 INSTALLATION & OWNER S MANUAL V4262 CAMO (SOFT SIDED) CAB KIT INSTALLATION & OWNER S MANUAL The contents of this envelope are the property of the owner. Be sure to leave with the owner

More information

AmTryke Adult Recumbent Model JT2000 #50-FC-2000

AmTryke Adult Recumbent Model JT2000 #50-FC-2000 AmTryke Adult Recumbent Model JT2000 #50-FC-2000 TOOLS Needed for Assembly 5 mm Allen Wrench 8 mm Socket or Wrench 10 mm Socket or Wrench 14 mm Socket or Wrench 15 mm Socket or Wrench 22 mm Socket or Adjustable

More information

Enigma Travel Chair and Lightweight Aluminium Wheelchair Owner s Handbook

Enigma Travel Chair and Lightweight Aluminium Wheelchair Owner s Handbook Enigma Travel Chair and Lightweight Aluminium Wheelchair Owner s Handbook Please read this manual before operation for maintenance instructions and safe usage of this wheelchair. Introduction The Enigma

More information

Note Section. Set-to-Spec. This section must be filled out, otherwise the selection will default to the mid-range measurements.

Note Section. Set-to-Spec. This section must be filled out, otherwise the selection will default to the mid-range measurements. AADL W659/W991 Quantum Q6 Edge Z with TB3 Power Positioning FOR AADL USE ONLY Pride Mobility Products Co. 5096 South Service Rd, Beamsville, ON, L0R 1B3 Phone: 888-570-1113 Fax: 866-514-1303 Discount:

More information

ELECTRIC MOBILITY CORP. POWER SEATING SYSTEM OWNERS MANUAL

ELECTRIC MOBILITY CORP. POWER SEATING SYSTEM OWNERS MANUAL ELECTRIC MOBILITY CORP. POWER SEATING SYSTEM OWNERS MANUAL TABLE OF CONTENTS 1. GENERAL GUIDELINES 3 2. SPECIFICATIONS 6 3. SAFETY INSPECTION AND MAINTENANCE CHECKLIST 7 4. TILT ONLY 8 5. RECLINE ONLY

More information

Toyota Prado 120 Backbone - RTPB2

Toyota Prado 120 Backbone - RTPB2 Toyota Prado 120 Backbone - RTPB2 Fit Time: 1.5 Hours Layout: IMPORTANT INFORMATION Maximum carrying capacity: Suitable Pioneers On Road Cargo Allowance Off Road Cargo Allowance Static Allowance Roof Allowance

More information

Insignia. Owner s Operator and Maintenance Manual. DEALER: This manual MUST be given to the user of the wheelchair.

Insignia. Owner s Operator and Maintenance Manual. DEALER: This manual MUST be given to the user of the wheelchair. Owner s Operator and Maintenance Manual Insignia DEALER: This manual MUST be given to the user of the wheelchair. USER: BEFORE using this wheelchair, read this manual and save for future reference. For

More information

STELLAR. 15" Seat Width 18" Seat Width. Requires Heavy Duty Base and Seat Frame. Extended delivery lead times may apply.

STELLAR. 15 Seat Width 18 Seat Width. Requires Heavy Duty Base and Seat Frame. Extended delivery lead times may apply. C u s t o m e r a n d O r d e r I n f o r m a t i o n Purchase Order * Dealer/Provider Name * Purchaser Name and Contact Information * Billing Address * Tag v.072318 Shipping Address * * required F r a

More information

BENTLEY. 15" Seat Width 18" Seat Width. Requires Heavy Duty Base and Seat Frame. Extended delivery lead times may apply.

BENTLEY. 15 Seat Width 18 Seat Width. Requires Heavy Duty Base and Seat Frame. Extended delivery lead times may apply. C u s t o m e r a n d O r d e r I n f o r m a t i o n Purchase Order * Dealer/Provider Name * Purchaser Name and Contact Information * Billing Address * Tag v.072318 Shipping Address * * required F r a

More information

Operating Instructions

Operating Instructions Operating Instructions Capella Operating Instructions OPERATING SAFETY WARNINGS Please read and obey all instructions and warnings listed in this manual, ignoring these warnings could result in serious

More information

FUZE T20. Order Form - Canada Prices in Canadian Dollars. January 1, C u s t o m e r a n d O r d e r I n f o r m a t i o n.

FUZE T20. Order Form - Canada Prices in Canadian Dollars. January 1, C u s t o m e r a n d O r d e r I n f o r m a t i o n. C u s t o m e r a n d O r d e r I n f o r m a t i o n Purchase Order * Dealer/Provider Name * Purchaser Name and Contact Information * Billing Address * Tag v.070118 Shipping Address * * required F r a

More information

US208S Scooter Carrier - US208P Power Chair Carrier 210 Lift N Go 130 Swing Away Installation Guide & Owners Manual

US208S Scooter Carrier - US208P Power Chair Carrier 210 Lift N Go 130 Swing Away Installation Guide & Owners Manual 7325 Douglas Rd. Lambertville, MI 48144 Phone: 1-800-541-3213 Fax: (734) 568-6705 www.wheelchaircarrier.com E-mail: admin@wheelchaircarrier.com US208S Scooter Carrier - US208P Power Chair Carrier 210 Lift

More information

TDX 2 Ultra featuring

TDX 2 Ultra featuring Ultimate Control. Ultimate Comfort. The Invacare TDX2 Ultra is an elite, high performance, centre wheel drive power wheelchair equipped with the advanced Ultra Low Maxx seating system. Designed to be the

More information

ACCLAIM OPERATOR, PARTS, AND INSTALLATION MANUAL BX4330 ACCLAIM

ACCLAIM OPERATOR, PARTS, AND INSTALLATION MANUAL BX4330 ACCLAIM ACCLAIM OPERATOR, PARTS, AND INSTALLATION MANUAL BX4330 ACCLAIM Tow Bar Class III (5000 lb) 2 Inch Coupler TOWING PRODUCTS DIVISION Page 1 of 8 292-2205 4/23/09 SAFETY DO NOT INSTALL, OPERATE OR USE THIS

More information

20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT

20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT 20 TONNE HYDRAULIC PRESS MODEL NO: CSA20FBT PART NO: 7614058 OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the press GC0516 INTRODUCTION Thank you for purchasing this

More information

Standard Base Price : 2,950. Standard Features

Standard Base Price : 2,950. Standard Features Power Wheelchair Retail Prescription Form PRONTOM41PP010716 Tel: 01656 776222 Fax: 01656 776220 JULY 2016 Email: ordersuk@invacare.com Online Spares available at: www.invacare.co.uk Customer Ref : Account

More information

T his chapter contains instructions for installing the RICON S-Series (ADA) Transit Use Wheelchair and Standee Lift

T his chapter contains instructions for installing the RICON S-Series (ADA) Transit Use Wheelchair and Standee Lift II. INSTALLATION T his chapter contains instructions for installing the RICON S-Series (ADA) Transit Use Wheelchair and Standee Lift with Manual Rollstop into most vans and buses, although custom installations

More information

S E R V I C E M A N U A L

S E R V I C E M A N U A L Invacare Action ³ NG & Action XT S E R V I C E M A N U A L ( M A I N T E N A N C E A N D A D J U S T M E N T ) The procedures in this manual MUST be performed by a qualified technician. 1606084-C September

More information

3875 Cypress Drive Petaluma, CA Fax

3875 Cypress Drive Petaluma, CA Fax 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) Variable Height Arm with Fixed Angle Front End for Flat Panel / Keyboard Bracket (L Brackets

More information

Single Seat Trailer. Owner s manual and safety instructions

Single Seat Trailer. Owner s manual and safety instructions Single Seat Trailer Owner s manual and safety instructions Owner s Manual Every effort has been made to ensure your trailer is of top quality and proven safe design, ready to provide you with many years

More information

Toyota Prado 150 Backbone - RTPB1

Toyota Prado 150 Backbone - RTPB1 Fit Time: 1.5 Hours Layout: IMPORTANT INFORMATION Maximum carrying capacity: Suitable Suitable On Road Cargo Off Road Cargo Pioneers On Road & Off Road Cargo Allowance Pioneers Allowance Allowance Static

More information

M1 - NPO. Dealer Information. Client Information. Client Measurements

M1 - NPO. Dealer Information. Client Information. Client Measurements Dealer Information * Contact: Dealer Code: * Dealer Name: Address: * City: * Province: * Phone#: * Fax#: PO#: Email Address: Client Information Permobil recommends that the client is evaluated by a certified

More information

A3 Seats and Seat Belts

A3 Seats and Seat Belts 7DEOHRI&RQWHQWV A3 Seats and Seat Belts A3 Seats and Seat Belts Table of Contents Table of Contents... 1 Safety... 1 Warnings and Cautions... 1 Introduction... 2 List of Figures... 1 Seats... 2 Driver's

More information

GAS CYLINDER LIFTS BEFORE YOU BEGIN

GAS CYLINDER LIFTS BEFORE YOU BEGIN I N S T R U C T I O N M A N U A L GAS CYLINDER LIFTS The LM Series gas cylinder lifts are smooth, quiet reliable lift mechanisms for your valuable equipment in a mobile application. The LM Series can be

More information

LIVE OUT QUICKIE QM-7 LIMITS WITH EXPERIENCE IT ALL. SEDEO Ergo Seating

LIVE OUT QUICKIE QM-7 LIMITS WITH EXPERIENCE IT ALL. SEDEO Ergo Seating EXPERIENCE IT ALL The QUICKIE QM-7 with SEDEO Ergo Seating and SpiderTrac 2.0 suspension redefines powered wheelchair technology, inside and out. Travel further, take on new challenges, and be your independent

More information

Sequoia 2 Post System

Sequoia 2 Post System Sequoia 2 Post System Owner s Manual Use and Care Fault Finding Warranty Information Table of Contents Sequoia 2 Post System Introduction... 3 Overview... 3 Placement of the Sequoia... 4 Components of

More information

REVERSIBLE OUTER COVER: >PELVIC OBLIQUITY KIT

REVERSIBLE OUTER COVER: >PELVIC OBLIQUITY KIT POSTURE SEAT MaTRx PS cushion is designed to provide superior positioning, stability and comfort. The design features an anatomically contoured shape with a unique waffled ischial relief recess, and an

More information

Gives useful tips, recommendations and information for efficient, trouble-free use.

Gives useful tips, recommendations and information for efficient, trouble-free use. User Manual DEALER: This manual MUST be given to the user of the product. USER: BEFORE using this product, read this manual and save for future reference. Invacare Matrx PB 1 General 1.1 Symbols Signal

More information

Invacare Action 4 NG S E R V I C E M A N U A L

Invacare Action 4 NG S E R V I C E M A N U A L Invacare Action 4 NG S E R V I C E M A N U A L ( M A I N T E N A N C E A N D A D J U S T M E N T ) The procedures in this manual MUST be performed by a qualified technician. 1606085- A Novemb er 2016 TABLE

More information

IL500 Sierra Inclined Platform Lift

IL500 Sierra Inclined Platform Lift IL500 Sierra Inclined Platform Lift Installation & Service Manual www.harmar.com 800-833-0478 IMPORTANT: Read and understand this manual thoroughly before attempting to install or operate the lift. If

More information

ULTRA TDX 2. Retail Order Form Max user weight 136kg (21.4 stone) Featuring

ULTRA TDX 2. Retail Order Form Max user weight 136kg (21.4 stone) Featuring TDX 2 ULTRA Retail Order Form Max user weight 136kg (21.4 stone) Featuring lass leading shear reduction C with our ESR Mechanism chieve the perfect fit with simple A and precise adjustment features Maximise

More information

VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications

VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 +1.707.773.1100 Fax 707.773.1180 www.gcx.com VHM-P (Non-Locking) Variable Height Arm with VESA Mounting Plate for 75 x 75mm or 100 x 100mm applications

More information

BENTLEY. Order Form - AADL - W322 Prices in Canadian Dollars. October 1, W h e e l L o c k s. A n t i - T i p p e r s. B a c k P o s t S t y l e

BENTLEY. Order Form - AADL - W322 Prices in Canadian Dollars. October 1, W h e e l L o c k s. A n t i - T i p p e r s. B a c k P o s t S t y l e C u s t o m e r a n d O r d e r I n f o r m a t i o n Purchase Order * Tag Dealer/Provider Name * Purchaser Name and Contact Information * Billing Address * Shipping Address * * required F r a m e T y

More information

Installation and Service Manual

Installation and Service Manual RAVE Star Lift Installation and Service Manual WARNING! STRICT ADHERENCE TO THESE INSTALLATION INSTRUCTIONS is required and will promote the safety of those installing this product, as well as those who

More information

SAFETY SAFETY CABLE INSTALLATION /00 1 of 6

SAFETY SAFETY CABLE INSTALLATION /00 1 of 6 SAFETY DO NOT INSTALL, OPERATE OR USE THIS EQUIPMENT UNTIL THE FOLLOWING OPERATING AND SAFETY INSTRUCTIONS HAVE BEEN READ AND UNDERSTOOD. This symbol is used to bring attention to safety precautions and

More information

Important. Contents. Contact us:

Important. Contents. Contact us: Operator's Manual Third Edition Third Printing Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall

More information

Installation Manual for VHM-25 Series Arms Channel Mount

Installation Manual for VHM-25 Series Arms Channel Mount 3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Manual for VHM25 Series Arms Channel Mount Install Time: 1015 minutes The purpose of this manual

More information

G3-MS20 G3-MS40 G3-MS24 G3-MS51 G3-MS52 G3-MS53 G3-MS50 G3-MS80 AURA SERIES

G3-MS20 G3-MS40 G3-MS24 G3-MS51 G3-MS52 G3-MS53 G3-MS50 G3-MS80 AURA SERIES AURA SERIES G3-MS G3-MS5 G3-MS5 G3-MS53 G3-MS0 G3-MS0 G3-MS50 G3-MS80 IMPORTANT SAFETY INFORMATION It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals, whether

More information

GECKO UPRIGHT STANDER USER MANUAL

GECKO UPRIGHT STANDER USER MANUAL GECKO UPRIGHT STANDER USER MANUAL IMPORTANT! Do not use the Gecko without reading and understanding these instructions. Failure to understand these instructions could result in a serious injury to your

More information