MODEL 35 and 39 SNACK

Transcription

1 MODEL 35 and 39 SNACK GLASS FRONT MERCHANDISER ILLUSTRATED PARTS MANUAL L0072 REV L AUTOMATED MERCHANDISING SYSTEMS INC 255 WEST BURR BLVD. KEARNEYSVILLE, WV Fax info@amsvendors.com INTERNATIONAL A.M.S. S DE RL DE CV KM. 9 CARR. AL CASTILLO NO MPIO. DE EL SALTO, JAL. MEXICO Fax servicio@amsint.com.mx AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX ,

2 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 2 THIS PAGE INTENTIONALLY LEFT BLANK

3 AMS Glass Front Merchandiser Model 35 and 39 Snack Illustrated Parts Manual Table of Contents SECTION PAGE INTRODUCTION General Introduction 5 Manual Organization 5 Merchandiser Identification 6 Patent Disclosure 7 Publication Notice 7 CABINET ILLUSTRATIONS Cabinet Covers and Screens Illustration 8 Cabinet Left Side and Center Illustration 0 Cabinet Right Side Illustration 4 CHILLER ILLUSTRATIONS Chiller Illustration Angled View 6 Chiller Illustration Top View 8 Chiller Option Ventilated Cabinet Illustration 20 DOOR ILLUSTRATIONS Door, Coin Bay Illustration 22 Door, Hinges, Glass and Lighting Illustration 24 Door, External Parts Illustration 30 Door, Sensor System and Hopper Illustration 32 Door with Optional Trim and Finish Parts Illustration 36 POS Display Illustration 38 ELECTRICAL HARNESS ILLUSTRATIONS 40 HELIX ILLUSTRATIONS Helix Illustrations 56.5 Helix Tray Illustration 60 Universal (Snack/Candy/Food) Tray Illustration & 39 High Capacity Heavy Product Tray Illustration 66 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 3

4 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 4 THIS PAGE INTENTIONALLY LEFT BLANK

5 GENERAL INTRODUCTION The purpose of this manual is to give our customers a way of identifying major service parts for repair and replacement. The illustrations and parts list in this manual are for identification only. Some optional parts are also shown. Illustrations of these major parts are keyed with our part numbers. The illustrations help identify the general design, position and orientation of these parts. The note section may also give important information. Please refer to the section on merchandiser identification on the following pages. Without the model style and serial number it may be difficult to identify the required part. Parts should be ordered from your distributor. It is our intent to assist our customers with up-to-date documentation. However, this manual may not show all parts, variations or changes. Some parts may be shown out of scale. This manual is itself subject to change without notice. If any errors are found, please notify AMS so the correction can be included in later revisions. Engineering data and third party information are generally not included. The graphical data, group assembly data, parts, part assembly, parts breakout information and tabular data conveyed by this manual is proprietary and belongs to AMS, and holders without prior consent of or without knowledge of and by AMS must surrender this data immediately. All measurements are in inches except where specified as Metric. MANUAL ORGANIZATION This manual is divided into general sections. Each section is further divided into the various subsections or subassemblies. These lead off with one or more illustrations showing the parts and each part is identified with a number. Note that some part numbers are for assemblies fabricated as a unit at AMS and are replaceable only as a unit. Also, other part numbers identify optional parts which may or may not have been contracted for and factory installed by AMS. The part number in the illustration is listed with the description or title for that part. In some instances there may be multiple parts to choose from. The correct service or repair part for the style of merchandiser must be selected. A quantities column in the list indicates quantities required. There is a note section where additional information may be found. This manual contains additional and new information for a vendor as currently manufactured. Older revisions of this manual should be kept with older vendors. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 5

6 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 6 MERCHANDISER IDENTIFICATION When requesting service, replacement parts or technical assistance, please use the Model Number and the Serial Number with Date Code, found on the Serial Plate (See Fig. below) affixed to the merchandiser. The plate is usually located inside the window. The information contained on this plate is necessary to determine what parts, kits, or maintenance apply to your vendor. Fig. Typical Serial Plate Model Number Breakdown AMS Example of Serial Number Breakdown Manufacturer Cabinet Trays Selections Width Built Year Month Sequence AMS means this vendor is an Automated Merchandising Systems merchandiser, 35 wide, with six (6) trays making available twenty four (24) positions for different products is translated as U.S. built (), manufactured in 2009, month of February, and was the 275th manufactured that year. Note: Manufactured in Mexico, Built = (2) The next two digits identify the month. The first month of the year is 0 and the last month is 2.

7 PATENT DISCLOSURE This merchandiser and/or certain of its components are covered by one or more of the following U.S. and international patents; U.S. PATENTS: 6,45,699; 6,384,402; 6,520,373; 6,708,079; 6,794,634; 7,9,95; 7,343,220; 7,742,837; 7,446,302; 8,003,93 CANADIAN PATENT: 2,329,34 MEXICO PATENT: 230,74 L0072, Revision L, ECN 3805, 8/5/6 PUBLICATION NOTICE It is our intent to assist our customers with up-to-date documentation: however, this manual may not contain all updates and is subject to revision without notice. Please contact our Service Department with your requests or comments. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 7

8 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 8 CABINET COVERS AND SCREENS ILLUSTRATION

9 CABINET COVERS AND SCREENS PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTES 3000 Screw, Sheet Metal, TEK 8-8 (/2 Long) For One Trim Screw, Sheet Metal, TEK 8-8 (3/4 Long) For Rear Trim When Option P/N 2308 Is Installed Rivet, Pop, Steel, /8 (/4 Long) 8 Quantities For One Cover Wrapper, Rear Chiller Hole Cover Use For Ambient (No Chiller) Option Wrapper, Rear Chiller Hole Cover Use For Ambient (No Chiller) Option Trim, Rear Chiller Hole Tank - Rear Chiller Hole Cover (35 ) 2087 Wrapper, Rear Chiller Hole Cover (39 ) Use For Ambient (No Chiller) Option Screen, Expanded Metal, Rear Chiller Hole Add To Other Rear Screens Screen, Rear Chiller Hole (39 ), 4 Mesh. ¼ x ¼ Wrapper Bottom Chiller Hole Cover (35 ) 2087 Wrapper Bottom Chiller Hole Cover (39 ) 2469 Screen, Bottom, Insect (35 ), Ver. 2 Aluminum 8 x6 Mesh Screen, Rear Chiller Hole, (39 ) 8 Mesh (/4 x /4 ) 2464 Trim, Bottom Chiller Hole (35 ) Ver Trim, Rear Chiller Hole (39 ) Use For Ambient (No Chiller) Option NOTE: The rear opening and the bottom opening are not the same size on 35 Cabinets (ECN 770). All screen materials are fitted to trim parts, and trim parts are attached to the outside of the cabinet with screws. The combination of screens may differ. Covers to seal the cabinet are always attached flush inside and outside the cabinet (without using trim) with rivets. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 9

10 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 0 CABINET LEFT SIDE AND CENTER ILLUSTRATION Europe Only

11 CABINET LEFT SIDE AND CENTER PARTS LIST ITEM PART NO. PART NAME QTY. NOTES 3000 Sheet Metal Screw TEK # Screw, 5/6-8, Type F 6 4 Per Leg Rivet, Steel, /8", /4" Grip, Blk Steel Rivet, 3/8" Grip Length /4" Nut, Square, Machine Washer, #0 SAE Flat 2 For Door Stop Cable (2 Places) Screw, Sheet Metal, TEK For Lock Assembly Bushing, Open/Closed Nut, 0-32, w/nylon Insert 2 For Door Stop Cable (2 Places) Screw, 0-32 x ¾ Phillips Pan Head 2 For Door Stop Cable (2 Places) 3067 Spacer,.92 ID x.25 Length x 3/8 Dia. 2 For Door Stop Cable (2 Places) Strain Relief, Button Lock Wire Tie, Panel Mount 4 33 Push Nut, 3/6 Stud Leg, Roller Bracket Leveling Leg 5 Cabinet To Be Leveled Using All Legs Lock, Flange Lock, Cage Roller, Molded (Nylon) Cable Assembly, Door Stop, Modified Cover Plate, Hinge Hole, Ver. 2 For Top Hinge Extension, Left Vertical Rail Mount Assembly, Leg, Left Front with Thread Covers Assembly, Leg, Front Hinge With Thread Covers Assembly Leg, Rear with Thread Covers Shaft, Headed Roller (Zinc Plated) Rail Mount, Left Vertical Ver. 2 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX ,

12 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 2 ITEM PART NO. PART NAME QTY. NOTES Assembly, Cabinet, (35 ) 2207 Assembly, Cabinet, (39 ) Contact AMS for your application 2323 Shipping Board 40 Long, Not Treated, (DOM) Shipping Board 38-3/8 Long, Not Treated, (DOM) Shipping Board 40 Long, Treated (ISPM 5), (EXPORT) Shipping Board 38-3/8 Long, Treated (ISPM 5), (EXPORT) Assembly, Low Temp/Snack Cabinet Lock Power Entry Module, 230V Europe Only Plate, Power Entry Module, CE Europe Only Sheet Metal Screw TEK # Liner, Power Cord Exit Cover, Wire Bushing Sheet Metal Screw, ¼ 3 For Lock Assembly

13 THIS PAGE INTENTIONALLY LEFT BLANK AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 3

14 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 4 CABINET RIGHT SIDE ILLUSTRATION U.S. SINGLE LAMP SOUTH AFRICA ISRAEL SIZE 2X 5 4 ELECTRICAL COMPONENT OPTIONS EUROPE 7 4

15 CABINET RIGHT SIDE PARTS LIST ITEM PART NO. PART NAME QTY. NOTES 3000 Sheet Metal Screw TEK # Nut, 8-32, Hex, Machine Screw For Attaching Power Harness Rivet, Pop, Steel, /8 x ¼ Grip Length Rivet, Pop, Steel, /8 x 3/8 Grip Length 4 For Attaching Washer, #0 SAE Flat 2 For Power Harness Filter, R.F.I For Filtering Electrical Noise Relay, Refrigeration, Single Pole For 24V Control of Optional Chiller Screw, Sems, 8-32 For Power Harness Assembly, Fuse Holder With Fuses Use P/N AG Fast Blow Fuse Only Transformer, Class II, 20V / 24V For Power 3258 Transformer, CE, 230V / 24V For Power Switch, Rocker, On/Off For 24VAC Circuit Control Cover Plate, Column, Fixed Cover Plate, Transformer Flange, Right Vertical Stiffener, Right Vertical Rail Mount Plate, Fuse Holder, Socket And Power Switch Mount Attached Inside of Rail Mount Decal, 24V Fuse, Ver Assembly, Cabinet, (35 ) 2207 Assembly, Cabinet, (39 ) Rail Mount, Right Vertical, Snack, (35 ) Contact AMS for your application Rail Mount, Right Vertical, Snack, (39 ) AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 5

16 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 6 CHILLER ILLUSTRATION ANGLED VIEW

17 CHILLER PARTS LIST ANGLED VIEW ITEM PART NO PART DESCRIPTION QTY NOTES 3000 Sheet Metal Screw TEK # Screws, ¼ x ¾, Self Tapping, Hex Head 2 For Attaching To Tank Walls Screws, ¼ x, Self Tapping, Hex Head 6 For Attaching To Tank Floor Evaporator Fan/Motor Assembly, 220V, 50Hz, Phase Evaporator Fan/Motor Assembly, 0V, 60Hz, Phase Note Voltage! Evaporator Cover Plate (35 ) 2036 Evaporator Cover Plate (39 ) Evaporator Plenum Assembly, /4, Chiller, 20V 2053 Assembly, /4, Chiller, 220V See Note Assembly, Chiller Housing, English (35 ) Assembly, Chiller Housing, Spanish (35 ) Housing must seal against Cabinet As Shown 2205 Assembly, Chiller Housing, English (39 ) Housing must seal against Cabinet As Shown Assembly, Chiller Housing, Spanish (39 ) Supplied with access Door Bracket, Temperature Sensor, Sensit II Assembly, Cabinet, (35 ) 2207 Assembly, Cabinet, (39 ) Contact AMS For Your Application Evaporator Mounting Panel, Stamped Drain Pan For Stamped Pan Assemblies Assembly, Stamped Evaporator Drain Pan Use with 299, Evaporator Mounting Panel NOTE: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system, creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty. Ambient snack merchandisers have no chillers or chiller parts. Ventilated merchandisers have a forced air system without any chiller. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 7

18 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 8 CHILLER ILLUSTRATION TOP VIEW

19 CHILLER PARTS LIST TOP VIEW ITEM PART NO. PART DESCRIPTION QTY. NOTES (See Note A Below) 3065 Fan, Condenser Assembly, 220V, 50Hz, Phase Note Voltage! 308 Fan, Condenser Assembly, 0V, 60Hz, Phase Note Voltage! Sponge (Condenser Drain Pan) Refrigeration Harness Use with Both 0V or 220V Systems Assembly, /4 H.P. Chiller, 240V, Ver. 2, AMS (WV) Assembly, /4 H.P. Chiller, 20V, Ver. 2, AMS (WV) See Note A Evaporator Mounting Panel, Stamped Drain Pan Used with Stamped Pan Assemblies Assembly, Stamped Evaporator Drain Pan Use with 299, Evaporator Mounting Panel Condenser Drain Pan Assembly, Formed Stamped Fabrication with 4 Sponges NOTE A: Chiller assemblies are charged with refrigerant and are replaceable only as an assembly. The refrigeration system is pressurized and sealed at the factory. Puncturing or cutting any component in the system will cause refrigerant gas and liquid to be propelled out of the system, creating an immediate physical hazard. Use caution to avoid accidentally opening the refrigerant system. It should also be noted that releasing refrigerant to the atmosphere is a federal crime and is punishable by law. Any service work requiring the system to be opened must be performed by a licensed technician using certified recovery equipment. Unauthorized service to the sealed refrigerant system may void the warranty. Ambient snack merchandisers have no chillers or chiller parts. Ventilated merchandisers have a forced air system without any chiller. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 9

20 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 20 CHILLER OPTION VENTILATED CABINET ILLUSTRATION

21 CHILLER OPTION VENTILATED CABINET ILLUSTRATION ITEM PART NO. PART DESCRIPTION QTY. NOTES 3000 Screw, Sheet Metal, TEK Screw, Sheet Metal, TEK Trim, Chiller Hole Qty. For Two Trim Parts 2 Qty. For Ventilator Assembly Replace Item For Rear Trim only When Option P/N 2308 is Installed 2040 Screen, Rear Chiller Hole, 8 Mesh (/4 X /4 ) 2308 Screen, Expanded Metal, Rear Chiller Hole Add to other rear screens 2463 Screen, Bottom Chiller Hole, (35 ) 8 Mesh, Ver Screen, Rear Chiller Hole 2464 Trim, Bottom Chiller Hole (35 ) Ver Trim, Chiller Hole (39 ) 2989 Assembly, Cabinet, (35 ) 2207 Assembly, Cabinet, (39 ) Assembly, Ventilator, Ver. 3, (35 ) 0V Assembly, Ventilator, Ver. 4, (39 ) 0V Tank is Inside, Wrapper is Outside NOTE: The rear opening and the bottom opening are not the same size on 35 Cabinets (ECN 770). All screen materials are fitted to trim parts, and trim parts are attached to the outside of the cabinet with screws. The combination of screens may differ. Covers are not used. Cabinet is shown without any other parts. Ambient snack merchandisers have no chillers or chiller parts. Chiller units provide refrigeration in the cabinet. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 2

22 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 22 DOOR, COIN BAY ILLUSTRATION

23 DOOR, COIN BAY PARTS LIST ITEM PART NO. PART NAME QTY. NOTES 3000 Screw, Sheet Metal TEK Carriage Bolt, #0-24,/2" Nut, Hex, Machine Screw, # per DBV Opening Nut, Hex, Machine Screw, # Rivet, Steel, /8", Black, Grip Length /4" Washer, Flat Steel, SAE Std., #6 Screw 5/ Washer, Flat Steel, SAE Std., #0 Screw 7/32 x ½ PC Board Support (3/6") 6 For Control Board Rivet, Nylon, Trim 2 Hold Door Closed Scavenger Button, Blk 2463 Assy., Coin Chute, Upper Scavenger Guide, Epoch Assembly, Plastic Coin Cup Assembly, Plastic Coin Cup, Gray Coin Box Bulkhead DBV Cover Plate 2 Flat Steel Plate, per DBV Opening Assembly, Coin Chute, Lower Bracket, Pushbutton Alignment, Epoch Assembly, Coin Box Epoch & ADA Short Door Stiffener, Upper, Without Fuse And Switch Door Stiffener, Upper, Locking, w/o Fuse And Switch Not Shown Door Stiffener, Bottom With Switch Assembly, Coin Door, Upper (5") Control Board, Isolated LED Power Mounting Panel, Changer, Multi-Use Assembly, Display, Ver. 3, Escutcheon (OLED) Contains display board Assembly, Scavenger System, VER. 3, ADA Escutcheon, Epoch Assy., Foamed Door, Snack, Epoch (35 ) 2506 Assy., Foamed Door, Snack, Epoch-ADA (35 ) Assy., Foamed Door, Snack, Epoch (39 ) Assy., Foamed Door, Snack, Epoch-ADA (39 ) Contact AMS for your application. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 23

24 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 24 DOOR, HINGES, GLASS AND LIGHTING ILLUSTRATION

25 DOOR HINGES, GLASS AND LIGHTING LAMPS PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTES 3000 Sheet Metal Screw TEK # Carriage Bolt, ¼-20, ¾ Rivet, Pop, Steel, /8 Diameter Sheet Metal Screw TEK # For Glass Retainers LED Assembly, ETI 9 For Single LED Option Nut, Hex With Lock Washer LED Assembly, ETI 9 3 For Dual LED Option Harness, LED Connector Cable, 3 For Dual LED Option LED Clip, Ver. 2 6 For Dual LED Option Screw, Sheet Metal, TEK 8-8, Clear Zinc, ½ L 9 For Dual LED Option 2238 Retainer, Vertical Eyelet Hinge, Washer Plate Lock Bolt Mounting Bracket Assembly, Top Hinge, 3/ Assembly, Bottom Hinge Bottom, 3/ Extrusion, Glass Installation, Ver. 2, 6.9 (35 ) Extrusion, Glass Installation, Ver. 2, (39 ) Extrusion, Glass Installation, Ver. 2, (35 ) Extrusion, Glass Installation, Ver. 2, (39 ) Extrusion, Glass Installation, Ver. 2, 3.68 (Epoch-ADA 35 & 39 ) Retainer, Horizontal Eyelet 2 2 Horizontal 2 Vertical Lock Bolt Cover, Black Lock Bolt Cover, White AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 25

26 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 26 ITEM PART NO. PART DESCRIPTION QTY. NOTES 225 Retainer, Glass Window, Bottom, /8 (35 ) 223 Retainer, Glass Window, Bottom, /8 (39 ) Ambient/Vent. (Single Pane Option) 2228 Retainer, Dual Glass Window, Bottom, 5/8 (35 ) 2225 Retainer, Dual Glass Window, Bottom, 5/8 (39 ) Chilled (Dual Pane Option) Retainer, Glass Window, Bottom, /8, Epoch-ADA (35 ) Retainer, White Glass Window, Bottom, /8, Epoch-ADA (39 ) Ambient/Vent. (Single Pane Option) Retainer, White Dual Glass Window, Bottom, 5/8, Epoch-ADA (35 ) Retainer, White Dual Glass Window, Bottom, 5/8, Epoch-ADA (39 ) Chilled (Dual Pane Option) 227 Window, Glass, Single Pane, /8 (35 ) 226 Window, Glass, Single Pane, /8 (39 ) Ambient/Vent. (Dual Pane Option) Window, Glass, Dual Pane, 5/8 (35 ) 228 Window, Glass, Dual Pane, 5/8 (39 ) Window, Glass, Single Pane, /8, Epoch-ADA (35 ) Window, Glass, Single Pane, /8, Epoch-ADA (39 ) Chilled (Dual Pane Option) Ambient/Vent. (Single Pane Option) Window, Glass, Dual Pane, 5/8, Epoch-ADA (35 ) 2509 Window, Glass, Dual Pane, 5/8, Epoch-ADA (39 ) Chilled (Dual Pane Option) Tray Restraint, Reduced Depth, Snack, Black Tray Restraint, Reduced Depth, Snack, White Assembly, False Leg Install When Vendor is Installed on Site Corner, Window Trim, Plastic 4

27 ITEM PART NO. PART DESCRIPTION QTY. NOTES 22 Retainer, 42 Glass Window, Vertical, /8 (35 ) 220 Retainer, 42 Glass Window, Vertical, /8 (39 ) Ambient/Vent. (Dual Pane Option) Retainer, 42 Dual Glass Window, Vertical, 5/8 (35 ) 2224 Retainer, 42 Dual Glass Window, Vertical, 5/8 (39 ) Chilled (Dual Pane Option) Retainer, 36 Glass Window, Vertical, /8, Epoch-ADA (35 ) 2224 Retainer, 36 Glass Window, Vertical, /8, Epoch-ADA (39 ) Ambient/Vent. (Dual Pane Option) Retainer, White, 36 Dual Glass Window, Vertical, 5/8, Epoch-ADA (35 & 39 ) Chilled (Dual Pane Option) 224 Retainer, Glass Window, Top, /8 (35 ) 222 Retainer, Glass Window, Top, /8 (39 ) Ambient/Vent. (Dual Pane Option) Retainer, Dual Glass Window, Top, 5/8 (35 ) 2223 Retainer, Dual Glass Window, Top, 5/8 (39 ) Retainer, Glass Window, Top, /8, Epoch-ADA (35 ) Retainer, Glass Window, Top, /8, Epoch-ADA (39 ) Chilled (Dual Pane Option) Ambient/Vent. (Dual Pane Option) Retainer, Dual Glass Window, Top, 5/8, Epoch-ADA (35 ) Retainer, Dual Glass Window, Top, 5/8, Epoch-ADA (39 ) Chilled (Dual Pane Option) Assy., Foamed Door, Snack, Epoch (35 ) Assy., Foamed Door, Snack, Epoch-ADA (35 ) Assy., Foamed Door, Snack, Epoch (39 ) Assy., Foamed Door, Snack, Epoch-ADA (39 ) Contact AMS for your application Cable Clamp, 3/8 Dia. Black Nylon 3 For Single or Dual AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 27

28 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 28 ITEM PART NO. PART DESCRIPTION QTY. NOTES Harness, LED Connector Cable, Harness, LED Connector Cable, Receptacle, Connector/PCB Housing, Nylon, Ellenby Lighting Harness, LED Connector Cable, 70

29 THIS PAGE INTENTIONALLY LEFT BLANK AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 29

30 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 30 DOOR, EXTERNAL PARTS ILLUSTRATION POS DISPLAY (REF)

31 DOOR, EXTERNAL PARTS LIST ITEM PART NO. PART NAME QTY. NOTES Carriage Bolt, #0-24, /2 Long 2 For Securing T-handle Nut, Hex, Machine Screw, # For Securing T-handle 3 30 Self Threading Nut, ¼ Stud 8 For Securing Escutcheon Screw, Type B, #8, Pan Head, Phillips #2 2 For Securing Keypad T-Lock Assembly Lockset And Keys Contact AMS for your application Assembly, DBV Mounting Bezel Decal, Guaranteed Delivery Optional Item Lens, Escutcheon, GFM, Ver Escutcheon, Plastic, Epoch Escutcheon/Keypad Assy. Includes Escutcheon, Lighted Keypad & Buttons and Display Lens 2277 Button, 0.90 Dia. Round, Escutcheon 2 2 Key Escutcheon Assembly, Lighted Keypad Assembly, Keypad, Epoch LED DBV Cover Panel, Gray 2 Optional Item Assy., Foamed Door, Snack, Epoch (35 ) 2 Key Escutcheon Assy., Foamed Door, Snack, Epoch-ADA (35 ) Assy., Foamed Door, Snack, Epoch (39 ) Contact AMS for your application Assy., Foamed Door, Snack, Epoch-ADA (39 ) Assy., Top Hinge, 3/ Assy., Bottom Hinge, 3/6 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 3

32 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 32 DOOR, SENSOR SYSTEM AND HOPPER ILLUSTRATION DETAIL A 24 2 A A

33 DOOR, SENSOR SYSTEM AND HOPPER PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTES 3000 Screw, TEK Screw, Machine, Type F, ¾ Long, Self-Tap, Phillips, Round Head Rivet, Pop, Steel, /8 x /4 Grip Bearing, Nyliner Snap-In Washer, Flat Steel, SAE Std., #0 Screw 7/32 X ½ Grommet, Rubber, -/2 ID x (-3/4 OD X.062 Groove) Harness Pass-Through 7 33 Pushnut, 3/6 Stud Tape, 3/8 X /4 Urethane Foam 4-5/8 Long Each Piece Vend Door, Shaft (35 ) 2008 Vend Door, Shaft (39 ) Product Kicker, Left w/out flange 2457 Product Kicker, Left (Left Hand When Facing Front Of Door) 246 Product Kicker Right w/out flange 2458 Product Kicker Right (Right Hand When Facing Front Of Door) Detector, Product Sensor Emitter, Product Sensor Assembly, Product Sensor Emitter Bracket Assembly, Product Sensor Detector Bracket Lens, Product Sensor Bracket Assembly, Vend Hopper, (35 ) Assembly, Vend Hopper,.5 CU. FT. Hopper (39 ) Assembly, Vend Door, Snack (35 ) Assembly, Vend Door, Snack,.5 CU. FT. Hopper (39 ) Black Spacer Sensor Board, Primary, Ver. 5 Add () Sensor Extension Sensor Board, Secondary, Ver. 5 Add () Sensor Extension Assembly, Primary Delivery Sensor Bracket, Epoch Assembly, Secondary Delivery Sensor Bracket Assembly, Secondary Delivery Sensor Cover Assembly, Primary Delivery Sensor Cover AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 33

34 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 34 ITEM PART NO. PART DESCRIPTION QTY. NOTES Assy., Foamed Door, Snack, Epoch (35 ) Assy., Foamed Door, Snack, Epoch-ADA (35 ) Assy., Foamed Door, Snack, Epoch (39 ) Contact AMS for your application Assy., Foamed Door, Snack, Epoch-ADA (39 ) Deflector Plate,.5 Helix Tray, RH (39 Only) Deflector Plate,.5 Helix Tray, LH (39 Only) Rivet to Hopper For.5 Helix Tray (39 ) Deflector Plate, 2.25 Height, -/8 CU. FT. Hopper (35 ) Rivet to Hopper in place of or Deflector Plate, 2.25 Height,.5 CU. FT. Hopper (39 ) Deflector Plate, 2.7 Height, -/8 CU. FT. Hopper (35 ) Rivet to Hopper in place of or Deflector Plate, 2.7 Height,.5 CU. FT. Hopper (39 ) NOTE: The product sensor option may not have been contracted for nor installed on your vendor.

35 THIS PAGE INTENTIONALLY LEFT BLANK AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 35

36 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 36 DOOR WITH OPTIONAL TRIM AND FINISH PARTS ILLUSTRATION TRIM OPTION 5 WINDOW COVER WITH TRIM OPTION

37 DOOR WITH OPTIONAL TRIM AND FINISH PARTS LIST ITEM PART NO. PART NAME QTY. NOTES 3000 Screw, Sheet metal, TEK For Securing Trim Rivet, Aluminum, ¼ Diameter, Natural (/4 Grip) 5 For Securing Window Covers Window Cover, Polycarbonate (35 ) Window Cover, Polycarbonate (39 ) Contact AMS for your application Trim, Plastic Insert, For Recessed Base (3.93 ) (35 ) Trim, Plastic Insert, For Recessed Base (37.25 ) (39 ) 2 Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (65.38 ) 2 Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (30.2 ) Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (29.4 ) Snaps into Trim Base Trim, Plastic Insert, For Recessed Base (23.9 ) (35 ) Trim, Plastic Insert, For Recessed Base (29.68 ) (39 ) 2 Snaps into Trim Base Recessed Trim Base With Holes, Painted (35 ) Recessed Trim Base With Holes, Painted (39 ) 2 Black Paint Finish Recessed Trim Base With Holes, Painted 2 Black Paint Finish Recessed Trim Base With Holes, Painted Black Paint Finish Recessed Trim Base With Holes, Painted Black Paint Finish Recessed Trim Base With Holes, Painted (35 ) Recessed Trim Base With Holes, Painted (39 ) 2 Black Paint Finish Trim, Vend Eyelet Assy., Foamed Door, Snack, Epoch (35 ) Assy., Foamed Door, Snack, Epoch-ADA (35 ) Assy., Foamed Door, Snack, Epoch (39 ) Contact AMS for your application Assy., Foamed Door, Snack, Epoch-ADA (39 ) Trim, Plastic Coin Cup Trim, Plastic Coin Cup, Gray NOTE: Trim Packages, Window Cover Packages and other options contracted for and installed at AMS may not apply to your vendor. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 37

38 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 38 POS DISPLAY ILLUSTRATION

39 POS DISPLAY PARTS LIST ITEM PART NO. PART DESCRIPTION NOTES POS Display Insert POS Display Diffuser LED Board POS Display Card (AMS) ENGLISH POS Display Card (IAMS) SPANISH Lightbox Assembly Bushing AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 39

40 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 40 ELECTRICAL HARNESS ILLUSTRATIONS

41 20" +/- 3" BLACK WIRE - LINE WHITE WIRE - NEUTRAL 6/3 SJT CABLE, PVC JACKET 300V, 3 AMP, 60 C MINIMUM BLACK = LINE WHITE = NEUTRAL GREEN = GROUND GREEN WIRE - GROUND IEC 320-STYLE, RIGHT ANGLE FEMALE CONNECTOR 25V-3A RATED, MOLDED NEMA 5-5P, RIGHT ANGLE, 25V-3A RATED, MOLDED 2042, POWER CORD ASSEMBLY, 5V DOMESTIC AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 4

42 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L , HARNESS, BALLAST/TRANSFORMER LINE

43 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 43

44 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 44

45 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 45

46 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 46

47 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 47

48 THERMOSTAT TYPE TEMPERATURE SENSOR 2468 TEMPERATURE SENSOR AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 48 2

49 AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 49

50 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 50

51 4 CONDUCTOR RIBBON CABLE TO CONTROL BOARD TERMINAL J9 TO DISPLAY BOARD DISPLAY HARNESS, LIGHTED POS POWER AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 5

52 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L ASSEMBLY, LIGHTED KEYPAD LED LIGHTING J " Cable " Cable "A" LED LIGHTING J2.0".0" 2 BLACK (GROUND) BLACK (GROUND) 2 RED (POWER) RED (POWER) HARNESS, LED CONNECTOR CABLE PIN MARKED ON CONNECTOR

53 " CABLE " CABLE LENGTH " A " KEY INSERTED INTO POSITION 3 CONTROLLER J 3.0 A RED (POWER) TUBING 2.0" LED LIGHTING J2 SECTION A-A WIRE SIDE 2 KEY 3 A BLACK (GROUND) 2699 HARNESS, LED CONTROL CABLE BLACK (GROUND) RED (POWER) PIN MARKED ON CONNECTOR AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 53

54 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 54 ELECTRICAL HARNESS PARTS LIST PART NO. PART DESCRIPTION QTY. NOTES 373 Power Cord, Australia 393 Power Cord, Continental Europe 394 Power Cord, U.K. and Ireland 3208 Power Cord, India and South Africa 2042 Power Cord Assembly, 5V Domestic 2044 Harness, Refrigeration For Chiller Power 2046 Harness, Door Motors 2047 Harness, Tray, 0 Column Use For 5 Column Tray 2048 Harness, Motor Distribution 2049 Harness, Ballast/Transformer Line 2054 Harness, R.F.I. Filter Ground Harness, Ground 2058 Harness, Multi-Drop Bus Use For Both SII and S Jumper Wire 2 Australia 240V Single 2070 Harness, Transformer and Fuse 2405 Harness, Refrigeration Relay T9A 2425 Harness, Delivery Sensor Detector/Control Primary to Control Board 2426 Harness, Delivery Sensor Detector/Emitter Secondary to Primary Board 2427 Harness, Product Sensor Emitter Secondary to Emitter Board (Optional) 2428 Harness, Product Sensor Detector Primary to Detector Board (Optional)

55 PART NO. PART DESCRIPTION QTY. NOTES 2468 Temperature Sensor, and Harness Integral to Sensor, for Chiller 2484 Harness, Power Distribution, Integral Socket 2485 Harness, On/Off Switch 2584 Harness,.5 Helix Tray 2590 Harness, Control Power & Refrigeration Relay 2592 Harness, Executive Mech. Connector Power Cord Assembly, 5, US and Canada With GFCI, Use in U.S. and Canada Power Input Harness Ambient Harness, Transformer, No Ballast Use with LED Lighting 2405 Harness, Display Lighted POS Power Harness Assembly, Lighted Keypad Harness, LED Connector Cable, Harness, LED Connector Cable, Harness, LED Control Cable, Harness, LED Control Cable, 2 NOTE: Some assemblies, such as the keypad, are fabricated with the harness as a unit. These are replaceable only as a unit. Some harness assemblies listed above are for options which may not have been contracted for and installed by AMS. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 55

56 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 56 HELIX ILLUSTRATIONS SLOT WIDTH TYPICAL SLOTS DIAMETER 7.8 TYPICAL.5 HELIX TRAY SMALL HELIX TYPICAL SLOTS SLOT WIDTH DIAMETER 22 7/8 TYPICAL SMALL HELIX SLOT WIDTH TYPICAL SLOTS DIAMETER TYPICAL LARGE HELIX 22 7/8

57 HELIX PARTS LIST PART NO. HELIX DESCRIPTION * SLOT (VEND) WIDTH NUMBER OF SLOTS (PITCH) HELIX OUTSIDE DIAMETER TURNS QTY. PER COLUMN NOTES Helix, Small CW, Black 2 5/ CW Set Use With As A Set Helix, Small CCW, Black 2 5/ CCW Set Helix, Small CW, Black 7/ CW Set Use With As A Set Helix, Small CCW, Black 7/ CCW Set Helix, Small CW, Black CW Helix, Small CW, Black 2 / CW Helix, Small CW, Black CCW Helix, Small CCW, Black 2 / CCW Helix, Small CCW, Black 2 / CCW Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black 7/ CCW Helix, Small CCW, Black / CCW Helix,.5, CCW, Black 5.5 CCW Use in.5 Helix Tray Helix,.5, CCW, Black 9/ CCW Use in.5 Helix Tray 2336 Helix, 3, CCW, Black CCW Bottle Tray 2337 Helix, 3, CCW, Black CCW Bottle Tray *Contact your distributor for special helix diameters and pitch. *Contact AMS for your application. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 57

58 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 58 PART NO. HELIX DESCRIPTION * SLOT (VEND) WIDTH NUMBER OF SLOTS (PITCH) HELIX OUTSIDE DIAMETER TURNS QTY. PER COLUMN NOTES Helix, 3.75 CCW, Black 4 / CCW Large Diameter Helix, 3.75 CCW, Black 3 / CCW Large Diameter Helix, 3.75 CCW, Black 2 5/ CCW Large Diameter Helix, 3.75 CCW, Black CCW Large Diameter Helix, 3.75 CCW, Black 3/ CCW Large Diameter Helix, 3.75 CCW, Black / CCW Large Diameter Helix, 3.75 CCW, Black / CCW Large Diameter Helix,.5, CCW, Black 7/8 0.5 CCW Use in.5 Helix Tray Helix,.5, CCW, Black 20.5 CCW Use in.5 Helix Tray Helix,.5, CCW, Black / CCW Use in.5 Helix Tray *Contact your distributor for special helix diameters and pitch. Contact AMS for your application.

59 THIS PAGE INTENTIONALLY LEFT BLANK AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 59

60 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 60.5 HELIX TRAY ILLUSTRATION

61 .5 HELIX TRAY PARTS LIST ITEM PART NO. PART DESCRIPTION QTY. NOTES 3000 Screw, TEK Rivet, Pop, Steel, / Latch, Nylon, Gum and Mint Strike, Nylon, Gum and Mint Motor, Single Helix Extrusion, Gum and Mint Rail Extrusion Mount, Upper (Gum and Mint)(Right Side) Extrusion Mount, Upper (Gum and Mint)(Left Side) Extrusion Mount, Lower (Gum and Mint)(Right Side) Extrusion Mount, Lower (Gum and Mint)(Left Side) Extrusion, Price Marker, Reduced Height 2046 Rail, Gum and Mint, Reduced Depth (35 )(Right Side) Rails To Fit Tray To 35 Cabinet 2 Rail, Gum and Mint, Reduced Depth (39 )(Assy., Lighted Keypad Rails To Fit Tray To 39 Cabinet Right Side) Rail, Gum and Mint, Reduced Depth (35 )(Left Side) Rails To Fit Tray To 35 Cabinet Rail, Gum and Mint, Reduced Depth (39 )(Left Side) Rails To Fit Tray To 39 Cabinet Doubler, Tray.5 Helix Tray Tray Body,.5 Helix Tray Tray Back,.5 Helix Tray Tray Inner Side,.5 Helix Tray 2 Parts Are Factory Assembled As A Unit Tray Inner Section,.5 Helix Tray Tray Inner Mid Section,.5 Helix Tray Divider, Tray,.5 Helix Tray, RH Divider, Tray,.5 Helix Tray, LH Tray Slide Channel,.5 Helix Tray, RH Tray Slide Channel,.5 Helix Tray, LH Helix Adapter,.5 Helix Tray Helix,.5 Tray, Counterclockwise, Black Helix,.5 Tray, Counterclockwise, Black 2 Tray is Equipped With Two of Each Bracket, Stop,.5 Helix Tray Harness,.5 Helix Tray Deflector,.5 Helix Tray, RH (39 ) Use When.5 Tray Is Installed Deflector,.5 Helix Tray, LH, (39 ) Use When.5 Tray Is Installed NOTE: Tray also comes in scrolling price option. Contact your distributor for details. AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 6

62 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 62 UNIVERSAL (SNACK/CANDY/FOOD) TRAY ILLUSTRATION

63 UNIVERSAL (SNACK/CANDY/FOOD) TRAY PARTS LIST ITEM PART NO. PART DESCRIPTION NOTES Tray Stop Tray Stop, LH Helix Per Column. See Helix Section Harness, Tray 0 Column Extrusion, Candy Pusher Optional, 2 Per 2022 & Divider With Cutouts Bar, Candy Pusher Optional, Per Divider With Cutouts Kit, Helix Splitter Optional, Per Selection Extrusion, Price Marker, Reduced Height (35 ) Extrusion, Price Marker, Reduced Height (39 ) Kit, Cup Rail, Small Helix Optional, Per Selection Kit, Cup Rail, 4 Helix Tray Doubler, Ver. 2 (35 ) Tray Doubler, Ver. 2 (39 ) Tray Corner, Ver. 2 (RH) Tray Corner, Ver. 2 (LH) Label Sheet, Reduced Height, Price Edge Trim, Tray Corner Right Hand Corner Only 2045 Tray Body, Reduced Depth (35 ) Tray Body, Reduced Depth (39 ) Helix Adaptor, Without Hub 238 Assembly, Tray Divider Assembly, Tray Divider, High Assembly, Tray Divider, Extra High Helix Alignment Device, PVC Label Sheet, Reduced Height, Price W/$ Label Sheet, Reduced Height, Location, White Motor, With Home Circuit, CCW Motor, With Home Circuit, CW Tray Stop, Intermediate, Slim Includes Divider With 2033 Spring, Select Type, Numbers To Form Columns Optional Kit, Mini-Dispenser Optional, Per Selection AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 63

64 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 64 ITEM PART NO. PART DESCRIPTION NOTES Assembly, Tray Rail, Snack (RH) Assembly, Tray Rail, Snack (LH) Screw, Sheet Metal, Type B, #8-8 Safety Screws For Rails Rivet, Steel, Black /8 Dia X /8 Grip Rivet, Steel, Black /8 Dia X ¼ Grip Canoe Clip 2 Per Helix Alignment Device Wire Tie, Stand Off Wire Tie, Panel Mount 32 3 Helix Ejector Rivet, Steel, /8, Plated NOTE: Tray also comes in scrolling price option. Contact your AMS distributor for details.

65 THIS PAGE INTENTIONALLY LEFT BLANK AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 65

66 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L and 39 HIGH CAPACITY HEAVY PRODUCT TRAY ILLUSTRATION

67 35 and 39 HIGH CAPACITY HEAVY PRODUCT TRAY PARTS LIST ITEM PART NO. PART DESCRIPTION NOTES Tray Stop Tray Stop, LH 3* Extrusion, Price Marker, Reduced Height (35 ) Extrusion, Price Marker, Reduced Height (39 ) Tray Corner, Ver. 2 (RH) Tray Corner, Ver. 2 (LH) Tray Doubler, Ver. 2 (35 ) Tray Doubler, Ver. 2 (39 ) Edge Trim, Tray Corner Right Hand Corner Only Tray Reinforcement (35 ) 2283 Tray Reinforcement (39 ) Tray Body, HCHP, Reduced Depth (35 ) Tray Body, HCHP, Reduced Depth (39 ) Canoe Clip Rivet, Steel, Black, /8 Dia.. X /8 Grip Wire Tie, Standoff Optional Contact Your Distributor Wire Tie, Panel Mount Rivet, Steel, /8, Plated Helix Adaptor, Without Hub 6 3 Helix Ejector Tray Divider, 3-3/ Tray Divider, 4-7/8 Select Type, Numbers To Form Columns Tray Divider, Helix Per Column See Helix Section Assembly, Candy Pusher Optional Contact Your Distributor Assembly, Helix Alignment Device Optional Contact Your Distributor Motor, With Home Circuit, CCW Optional Contact Your Distributor AUTOMATED MERCHANDISING SYSTEMS INC, (304) / FAX , 67

68 AMS GLASS FRONT MERCHANDISER, MODEL 35 and 39 SNACK, ILLUSTRATED PARTS MANUAL, L0072, REV. L 68 ITEM PART NO. PART DESCRIPTION NOTE Harness, Tray, 0 Column Universal Tray Clip,.75" Screw, Sheet Metal, Type b, #8-8 Supplied, Not Shown Assembly, Heavy Product Rail, Service, RH Supplied, Not Shown Assembly, Heavy Product Rail, Service, LH Supplied, Not Shown *Tray also comes in scrolling price option. Contact your AMS distributor for details.