STARSURGICAL LED
|
|
- Ethan Craig
- 6 years ago
- Views:
Transcription
1 SPEIFITION FETURES HOUSING: FRME: LENS: 20 gauge formed cold rolled steel housing with continuous seam welds. luminum and stainless steel options available. Inset and overlapping doorframe available in aluminum, cold rolled steel, and stainless steel. Extruded inset door available in anodized aluminum or white painted aluminum. Frame held to housing via aircraft cable. crylic lens with optional RFI and symmetric/asymmetric pattern, smooth side out. Inset (cold rolled steel, stainless steel and.050 alum) and Overlapping frame uses a rail hold down system. LE: vailable in three color temperatures 3500 K, 4000 K and 5000 K. Other color temperatures available, consult factory. 0-10V dimming available with % range and 1-100% range. Must specify dimming under options. FSTENERS: Stainless steel Philips flat head screws with captive cage nuts. Finish to match housing. FINISH: GSKET: White antimicrobial powder coat finish following multistage iron phosphate pre-treatment. losed cell EPM and closed cell silicone gaskets prevent air contaminations from entering the fixture. ORERING INFORMTION Ex: SSR22-H/IS-L4401--UN Project: Type: Product: STRSURGIL LE PROUT NOMINL SIZE FMILY MOUNTING (imensional ata Pg. 2) HOUSING SS PPLITION: Operating Rooms, Examination Rooms, Isolation Suites, Laboratories, and more. MOUNTING: Surface (S) or Recessed (R) installation. Recessed mounting accommodates Grid and Flange installations. Recessed fixtures will be supplied with adjustable swing arms that can be used for Flange applications or taped to the side for Grid applications. Recessed install compatible with 1-1/2 and 15/16 Grid systems. Mounting for custom ceilings available, consult factory. LEL: Fixture is certified to UL standards. ertified IP65, ISO4, and NSF. ISO 4 IP65 FRME Inset (I) or Overlap (O) LUMEN OUTPUT (Performance ata Pg. 3) LMP TYPE S = Surface R = Recessed Housing (Grid/Flange installation) 22 = 2x2 24 = 2x4 H = 20Ga. RS (standard) HS = 20Ga. SS (rushed) HP = 20Ga. SS H =.050Ga. lum. IRUITS LENS VOLTGE OPTIONS IE=Extruded lum. L2 = Low IP=Extruded lum. L4 = Standard (Painted) L6 = Medium IP65: L8 = High I=20Ga.RS I=.050 lum. (Painted) I=20Ga.S.S. (rushed) IS=20Ga.S.S. (Painted) O=18Ga.RS (Standard) OS=18Ga.S.S (rushed) OP=18Ga.S.S. (Painted) O=.050 lum. (Painted) KEY 35 = 3500 K 40 = 4000 K 50 = 5000 K 1 = 1 ircuit 2 = 2 ircuits FZ = Fuse* M = 0-10V dimming with % range M1 = 0-10V dimming with 1-100% range S2 = Step im. Module (50-100%) S3 = Step im. Module ( %) IP66 = IP66 rating (only with Overlapping Frame) MS = MIL-ST-461F =.125 Prismatic crylic E=.125 White Frost. Poly. R=.125 Symmetric Pris. crylic with RFI Grid S=.150 Symm. symmetric Pris. crylic with RFI Grid 12 = 120V 27 = 277V 34 = 347V UN = Universal FY = Yoke racket for Recessed mount (Replaces swing arm system) EL1 = Emerg. at. LE Low ( lm) EL2 = Emerg. at. LE High ( lm) RF = (RIF) Radio Interference Filter* TH = Torx Head screws (with center pin) TM = Tandem Mount+ (120V-277V) FZ* M M1 S2 S3 IP66 MS Not IP65 90 = 90 RI For additional options and dimensional details please consult your New Star Lighting Representative. Page 1/3 FY EL1 EL2 RF* TH TM+ 90 Subject to change * annot use with UN voltage + Requires joiner bracket. Supplied with fixture.
2 STRSURGIL LE IMENSIONL T SURFE MOUNTING (S) REESSE MOUNTING (R): GRI & FLNGE 3.096" MX " SS22: 4x Ø.31" HOLE SS24: 6x Ø.31" HOLE.875" KO (4).250 " HOLES FOR EILING WIRE TTHMENT INSET FRME LUMINUM EXTRUE INSET FRME OVERLPPING FRME I FRME ETIL IE FRME ETIL O FRME ETIL 2.31" SSS " 3.94" 24.07" 1.38" SSS " 3.94" 48.07" SSR " 4.00" 23.69" SSR " 4.00" 47.69".94" SSR (W/ O FRME) REESSE GRI SSR (W/ O FRME) REESSE FLNGE REOMMENE EILING UT OUTS: SSR22: 22.88" X 22.88" SSR24: 22.88" X 46.88" GRI OMPTIILITY: Spaced at 24 x 48 enters 1-1/2" 1-1/2" 15/16" For additional options and dimensional details please consult your New Star Lighting Representative. Page 2/3 1-1/2"
3 STRSURGIL LE PERFORMNE T MOEL OUTPUT LMP TYPE LUMENS ELIVERE EFFIY (lm/w) INPUT POWER (W) 3500 K Low 4000 K K K Standard 4000 K SS K K Medium 4000 K K K High 4000 K K K Low 4000 K K K Standard 4000 K SS K K Medium 4000 K K K High 4000 K K isplayed information is with a.125 Prismatic Polycarbonate. Subject to change without notice. Visit for additional information and IES files. Performance ata subject to change without notice. For additional options and dimensional details please consult your New Star Lighting Representative. Page 3/3
4 SPEIFITION FETURES HOUSING: FRME: LENS: Project: Type: Product: STRSURGIL FLUORESENT SSS22/SSS24/SSG22/SSG24/SSF22/SSF24 20 gauge formed cold rolled steel housing with continuous seam welds. luminum and stainless steel options available. Inset and overlapping doorframe available in aluminum, cold rolled steel, and stainless steel. Extruded inset door available in anodized aluminum or white painted aluminum. Frame held to housing via aircraft cable. crylic lens with optional RFI and symmetric/asymmetric pattern, smooth side out. Inset (cold rolled steel, stainless steel and.050 alum) and Overlapping frame uses a rail hold down system. ELETRONIS: Electronic instant start ballast <10% TH standard. Lamps by others. FSTENERS: FINISH: GSKET: Stainless steel Philips flat head screws with captive cage nuts. Finish to match housing. White antimicrobial powder coat finish following multistage iron phosphate pre-treatment. losed cell EPM and closed cell silicone gaskets prevent air contaminations from entering the fixture. PPLITION: Surgical Suites, Operating Rooms, Examination Rooms, Isolation Suites, Laboratories, and more. MOUNTING: Surface, Grid or Flange mounting. Flange fixtures come with adjustable 90 swing arm for easy installation. Optional Yoke racket would replace swing arm. Grid fixtures compatible with 1-1/2 and 15/16 Grid systems. Mounting for custom ceilings available, consult factory. LEL: Fixture is certified to UL standards. ertified IP65, ISO4, and NSF. ORERING INFORMTION Ex: SSG24-HS/I UN PROUT NOMINL SIZE FMILY MOUNTING (imensional ata Pg. 2) HOUSING SS LMP TYPE S = Surface G = Grid F = Flange 22 = 2x2 24 = 2x4 H = 20Ga. RS (standard) HS = 20Ga. SS (rushed) HP = 20Ga. SS H =.050Ga. lum. FRME Inset (I) or Overlap (O) IE=Extruded lum. IP=Extruded lum. (Painted) IP65: I=20Ga.RS I=.050 lum. (Painted) I=20Ga.S.S. (rushed) IS=20Ga.S.S. (Painted) O=18Ga.RS (Standard) OS=18Ga.S.S (rushed) OP=18Ga.S.S. (Painted) O=.050 lum. (Painted) IRUITS LENS VOLTGE OPTIONS ISO 4 IP65 # OF LMPS 2 = 2 Lamps 3 = 3 Lamps 4 = 4 Lamps 6 = 6 Lamps 2x2: 14 = Lin. 14W T5 17 = Lin. 17W T8 24 = Lin. 24W T5 HO 2x4: 28 = Lin. 28W T5 32 = Lin. 32W T8 54 = Lin. 54W T5 HO KEY 1 = 1 ircuit 2 = 2 ircuits E1 = Emerg. attery Pack (450 Lumens)* E2 = Emerg. attery Pack (1100 Lumens)* RF = RIF (Radio Interference Filter)* TH = Torx Head screws (with center pin) FY = Yoke racket for Flange mount (Replace swing arm system) If circuit is not specified at time of quote or order, fixture will have single circuit. =.125 Prismatic crylic 12 = 120V E=.125 White Frost. Poly. 27 = 277V R=.125 Symmetric Pris. 34 = 347V crylic with RFI Grid UN = Universal S=.150 Symm. symmetric (120V-277V) Pris. crylic with RFI Grid IP66 = IP66 rating (only with Overlapping Frame) TM = Tandem Mount+ = imming allast* PR = Program Rapid Start FZ = Fuse* MS = MIL-ST-461F E1* E2* RF* TH FY IP66 TM+ * PR FZ* MS Not IP65 * annot use with UN voltage + Requires joiner bracket. Supplied with fixture. onsult factory for lamp-ballast options onsult factory for T5 availability Page 1/2 V
5 IMENSIONL T STRSURGIL FLUORESENT SSS22/SSS24/SSG22/SSG24/SSF22/SSF24 SURFE MOUNTING GRI MOUNTING FLNGE MOUNTING REMOVLE OVER; GSKETE TO HOUSING WITH (2) I. K.O. S I. K.O I. K.O. WTER-TIGHT HU PROVIE (4).4375 I. THRU HOLES OVERLPPING FRME LUMINUM EXTRUE INSET FRME OVERLPPING FRME LUMINUM EXTRUE INSET FRME OVERLPPING OOR LUMINUM EXTRUE INSET OOR Recommended eiling ut-out SSS22 24" 3.94" 24.07" 24" N/ SSS24 24" 3.94" " N/ SSG " 3.94" 24.07" 23.69" N/ SSG " 3.94" N/ SSF " 3.94" 25.25" 25.13" " x " SSF " 3.94" 49.13" 25.13" " x " (SSG) GRI OMPTIILITY: Spaced at 24 x 48 enters 1-1/2" 1-1/2" 15/16" 1-1/2" For additional options and dimensional details please consult your New Star Lighting Representative. Page 2/2 V
STARCLEAN LED SCS22/SCS24/SCR22/SCR24. HC = 20Ga. CRS (standard) HS = 20Ga. SS (Brushed) HP = 20Ga. SS (painted) HA =.050Ga. Alum.
www.newstarlighting.com SPEIFITION FETURES Project: Type: Product: STRLEN 22-24 LE SS22/SS24/SR22/SR24 HOUSING: 20 gauge formed cold rolled steel housing with continuous seam welds. luminum and stainless
More informationMEDMASTER DOWNLIGHT Luminaires for Surgical Applications
PRODUCT FEATURES: 6" sealed, recessed downlight with regressed or flush lens trim Conducted emissions controlled as per MIL-STD-461F Delivered lumens: 794-5,543 lm 1% Dimming via 0-10V, DALI or EcoSystem
More informationRAIL 4 RP4D TELESCOPIC LED. RECESSED PERIMETER. DIRECT
RIL 4 RP4D TELESOPI LED. REESSED PERIMETER. DIRET PRT #: PREP Y: PROJET: NOTES: DTE: PPROVL SIGNTURE: DTE (DD/MM/YYYY): PERFORMNE SUMMRY @ 3500K Lumens Meta lanc Meta lanc w/ symmetric 80 RI 596 662 90
More information003 3 foot foot RUN Nominal Length* * For actual lengths see
M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount
More information44 Series 4ft Wall Mount/ Surface Mount Linear Fixture
FETURES & SPECIFICTIONS INTENDED USE linear 4 x 4 fixture for distinctive architectural lighting plans. Ideal for corridors, lobbies, and office areas,4 x 4 Series fixtures can be installed individually
More informationFood Processing Vaportight
PROJECT DTE TYPE NOTES REV: /5/08 - High Lumen Packages, up to 9,00Lm Delivered - mbient operating temps as Low as -0C(-0F) and as High as +0C(+0F) (Temps Vary by Configuration. Verify in Energy Data Section)
More informationNMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
More informationRSS SERIES R S S. Fluorescent Lighting for Hazardous Locations
RSS SERIES Fluorescent Lighting for Hazardous Locations R S S Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Location UL 1598A Marine Outside Type CUL Wet Locations IP66 55 Ambient Temperature
More informationSecureseal HC04 LED. Recessed
Secureseal HC04 LED. Recessed WET IP65 IP65 applicable to x4 only CAT #: PREP BY: DATE: PROJECT: TYPE: NOTES: x, x4 x, x4 7 [0.7] 577 [.7] DRYWALL T-BAR 309.6 [.] Max. Width Drywall Opening 7 [0.7] See
More informationavenue features dimensional data performance Narrow 3" slot T5 fluorescent with opaque satin lens.
features Narrow 3" slot T5 fluorescent with opaque satin lens. Shielding options include corrugated, solid regressed trim, concave louver as well as flush lens. Drywall installation is availale, which
More informationQty: B B lm/6.9W per foot. per foot. 2B lm/15.3W per foot. 2B lm/13.
Date: Customer: Project: Type: Qty: M125 Order Code: L125 - - - - - - - - - - - - L125 Series L125 M125 Multi-Mount Form Light Engine 1B45 1,2 1116lm/11.9W 1B40 1 1B35 1 1009lm/10.6W 888lm/9.3W 1B30 1
More informationOptions AMF Antimicrobial Finish (All Exposed Surfaces) BLK Black Doorframe. Accessory
PROJECT INFORMATION Job Name LightBox CSMRI SERIES PRODUCT FEATURES:»» Recessed ceiling mount grid; 2' 4'»» Non-ferrous construction»» Antimicrobial finish option available»» Expansive offering of high
More informationWALL MOUNT. Notes: Project: Type: PROJECT INFORMATION DIMENSIONS SECTION VIEWS ORDERING CODE PRODUCT SPECIFICATIONS
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 1/16" 78mm 4 102mm 4 102mm 4 3/8 111mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH/FT
More informationfor environmentally critical applications
Enviroseal LINEAR Wraparound Luminaires for environmentally critical applications ENVIRONMENTAL Transportation Food Processing Hazardous Location table of contents ES, HES, FES Series EnviroSeal Features...4-5
More informationCONVERJ CJ24 2x4 Architectural Recessed
Project Name Date Type CONVERJ CJ24 2x4 Architectural Recessed 3-1/2" (88.9mm) 24" (609.6mm) Key Features Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector
More informationFCW3043 ADA FCW3045 ADA FCW3042 ADA FCW3040 ADA
FCW3043 2.5 in FCW3045 2.3 in FCW3042 2.3 in FCW3040 2.2 in 120 www.fclighting.com *Consult website for updated specification sheets regarding detailed information and performance. FC Lighting, Inc. 2012.
More informationWFHN LED SERIES W F H N L E D. High-Bay Lighting for Heavy Hose-Down Environments
WFHN LED SERIES High-Bay Lighting for Heavy Hose-Down Environments UL 1589 Wet Locations UL 8750 LED Safety NEMA 4X CUL Listed NSF Certified Food Equipment High Pressure Hose-Down One Piece Welded Aluminum
More informationLIGHTPLANE 2R LP2R RECESSED. QuickShip Eligible
LIGHTPLNE 2R LP2R STNDRD SIZES 2 perture Configurable in linear shapes and straight run sections Compatible with Drywall, T-Grid, Slot, and rmstrong Techzone LMPING LED - 80/90 CRI - 3000K/3500K/4000K
More informationRELUCENT L I G HTING
L I G HTING URGIAL THEATER LIGHTING YTEM OF THE FUTURE s surgical lighting products change the way operating room lighting is powered and controlled. s new External Field Illuminator sets new standards
More informationCLARA CLA SUSPENDED, WALL, SURFACE
CLARA CLA STANDARD SIZES 4.75" Hollow Lensed Body Configurable in 2ft increments (suspended mount) ADA-Compliant 2ft/4ft wall sconce LAMPING LED - 80+ CRI - 3000K/3500K/4000K Dimming down to 0% FINISH
More informationCoreLine Recessed the clear choice for LED
CoreLine Recessed the clear choice for LED CoreLine Recessed Whether for a new building or renovation of an existing space, customers want lighting solutions that provide quality of light and substantial
More informationAlloy LED: Delivering Continuous Innovation
GSA Solutions Alloy LED: Delivering Continuous Innovation Alloy LED is a manufacturer and distributor of superior LED lighting solutions that enhance the way people live and work. From our high-quality
More informationNotes: Indirect. 5 1/2" 140mm. 5 1/32 128mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct / Indirect Direct Indirect 5 1/2" 14mm 5 1/2" 14mm 5 1/2" 14mm SHOWN WITH LENS OPTION 5 1/32 128mm ORDERING CODE 5 1/32 128mm 5
More informationWFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
More informationDual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1
More informationCONVERJ CJ22 2x2 Architectural Recessed
Project Name Date Type CONVERJ CJ22 2x2 Architectural Recessed 3-1/2" (88.9mm) 24" (609.6mm) Key Features Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector.
More informationCONVERJ CJ14 1x4 Architectural Recessed
Project Name Date Type CONVERJ CJ14 1x4 Architectural Recessed 3-1/2" (88.9mm) 12" (304.8mm) Key Features Formed 20 gauge cold rolled steel housing. Highly reflective die-formed white painted reflector
More informationSeem 6. Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic.
Seem 6 FLUORESCENT GRID parabolic louver DIMENSIONAL DATA grid 5.53" 14.6mm FEATURES Narrow 6 aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted
More informationHorizon Patient Bed Light LED and Fluorescent Solutions
Horizon Patient Bed Light LED and Fluorescent Solutions Horizon is the perfect blend of design, performance and durability. An aesthetically-pleasing form that minimizes the visual impact in the space.
More informationSLIM PENDANT DIRECT. Project. Type. Notes. Ordering Guide PERFORMANCE PER LINEAR FOOT AT 3500K 1 / 8. axislighting.com. Shown with VL optic
Project Type Notes Shown with SO lens Shown with louver Shown with VL optic PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY DISTRIBUTION UP DOWN 1 3/8" up/1down at 8 lm/ft
More informationROUND SQUARE E DOLOGY.COM S P E C I F I C AT I O N S H E E T SPECIFICATION SHEET ROUND&SQUARE TRIM&TRIMLESS FIXED. Project name: Type:
ELEMENT PLUS - S ROUND&SQUARE &LESS FIXED SPECIFICATION SHEET PAGE: 1 OF 3 ROUND - 46511 LESS LESS - 46531 5" (126mm) General information Luminaire characteristics: Power input-lumens-efficacy: BO: 13W,
More informationMHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
More informationRECESSED ASYMMETRIC MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 5" SHOWN WITH LENS OPTION 3 13/32 ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3
More informationSUPERPLANE 2.5R SP2.5R CONTROLROLL OPTICS RECESSED. QuickShip Eligible
SUPERPLNE 2.5R CONTROLROLL OPTICS STNDRD SIZES 2.5" perture Configurable in linear shapes and straight run sections CONTROLROLL Optics up to 250 feet of seamless illumination LMPING LED - 80/90 CRI - 000K/500K/4000K
More informationNotes: 4 1/4" 108mm. 4 1/4" 108mm
PROJECT INFORMATION Project: Notes: Type: Approved by: Date: DIMENSIONS SECTION VIEW 4 1/4" 108mm 25 1/4" 641mm SIDE VIEW 25" 635mm 25 1/4" 641mm 4 1/4" 108mm SHOWN WITH ORDERING CODE 1 2 3 4 5 6 7 8 9
More information1.38. Kilo Profile /adjustable bracket Maximum system length In series. Lumens / Watt (with clear lens) LENS MOUNTING FINISH
Features Efficacy up to 92 lm/w - a 4% increase over the standard Kilo model V lass 2 fixtures made to order up to 144. Fixtures can be linked up to depending on output Suitable for undercabinet, millwork
More informationSeem mm 4.50" 4.00" 101.6mm. Narrow 4" linear fluorescent allows for both individual or continuous runs.
FLUORESCENT recessed companion wall mount companion DIMENSIONAL DATA FEATURES Narrow 4" linear fluorescent allows for both individual or continuous runs. Frosted acrylic flush lens provides even illumination,
More informationEDGE EX1 1 Suspended Direct Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended Direct Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationCatalog Number. Notes
. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the
More informationMHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
More informationProject Name. 23-5/8 (600.2mm)
LiFT 2x2 Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 23-5/8 (600.2mm) 23-5/8 (600.2mm) 5-5/8 (143mm) Formed 20 gauge cold rolled steel housing Highly reflective die-formed white painted reflector
More informationavenue led features dimensional data performance Narrow 3" slot LED with frosted satin lens.
led features Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid regressed trim or flush lens. Avenue B LED allows ceiling tiles to rest on fixture rails, keeping
More informationseem 4 grid features dimensional data performance
grid seem features Narrow " aperture slot fluorescent luminaire that integrates with the ceiling for a clean unobtrusive aesthetic. Frosted acrylic flush lens provides even illumination, high performance
More informationFINA F48B 48 Direct and Uplight Architectural Round
Project Name Date Type FINA F48B 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish
More informationFINA F36B 36 Bidirectional Architectural Round
Project Name Date Type FINA F36B 36 Bidirectional 4-1/2 4-7/8 (114.3mm) (123.8mm) 33-15/16 (862mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with 1/4 trim Aluminum
More informationVIA 2 PLUS RECESSED W W W. L U M E N W E R X. C O M
VIA 2 PLUS RECESSED W W W. L U M E N W E R X. C O M DESCRIPTION Via 2 PLUS combines the elegance of Via 2 with the added architectural element of a lens which protrudes ½" below the surface plane. Via
More informationAvenue B. Grid Mount (Regress Trim Shown) Flush Lens. Drywall Flange (Regress Trim Shown) Narrow 3" slot LED with frosted satin lens.
LED corrugated regress trim solid regress trim flush lens DIMENSIONAL DATA Grid Mount (Regress Trim Shown) FEATURES Narrow 3" slot LED with frosted satin lens. Shielding options include corrugated or solid
More informationCentera LED Fully Luminous 2x2
TM Centera Fully Luminous Series provides comfortable, even, diffuse light for use in private offices, open office areas, upscale retail applications, public circulation areas, and classrooms. Fully luminous
More informationDescription. Material. LED Chip. Mounting. Max Length. Environment. Certifications. Warranty. Dimming
Quantum 2 Square 0808K Description The Quantum 2 SQUARE 0808K Channel is a frosted lensed aluminum channel fixture that is powered by Quantum 2 High Density 15 LED tape light. It is dimmable, surface and
More informationFINA F48 48 Direct and Uplight Architectural Round
Project Name Date Type 48 Direct and Uplight Architectural Round 4-1/2 4-7/8 (114.3mm) (123.8mm) 45-15/16 (1166.8mm) Key Features Extruded aluminum housing is rolled and welded for seamless finish with
More informationLUCEN 2x2 ARCHITECTURAL RECESSED LUMINAIRE
Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 3-3/4 (95.3mm) 23-3/4 (603.3mm) 23-3/4 (603.3mm) Pre-painted formed 22 gauge cold rolled steel housing Highly reflective die-formed white painted
More informationEDGE EX1B 1 Suspended Bidirectional Linear
Project Name Date Type 3-9/16 (90.5mm) EDGE EX1 1 Suspended idirectional Linear 1-1/2 (38.1mm) 1-3/4 (44.5mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationSeries DKS 2"W Low Profile LED Surface Mount
2"W FEATURES & SPECIFICATIONS INTENDED USE Full body micro silhouette makes a bold statement with a minimal design in brushed nickel powder coated finish (consult factory for other finishes). Scaled to
More informationNotes: 4 3/4" 121mm. (1) Compatible with Redwood systems
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 4 3/4" 121mm 5 1/32 128mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 VERSION 3 NOM.
More informationNotes: 3 13/32. (5) Please consult factory (6) Available with T8 lamp only
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS Direct Indirect 3 13/32 ORDERING CODE 3 13/32 SHOWN WITH LENS OPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT
More informationRecessed linear illumination system
Extruded aluminum linear illumination system, Kilo Recessed is available in sections up to 116 in total. Specifically designed LED engine provides constant illumination levels from the beginning to the
More informationEDGE EX4B 4 Suspended Bidirectional Linear
Project Name Date Type 4-3/4 (120.7mm) EDGE EX4 4 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Room-Side Maintenance
More informationDELTA RAIL SYSTEM SYMMETRIC OPTICAL SYSTEM STANDARD SPECIFICATIONS DR 1 320MH-PS. 29,700 36,000 40, , mm 400MH 400MH-PS 1000MH-BT37 DR 2
SPECIFICATIONS DELTA RAIL SYSTEM SYMMETRIC OPTICAL SYSTEM STANDARD Number of Lamps Lamp Type All smaller wattages available Lumen Package Initial lumens, based on published lamp information 004 DR 405mm
More informationWALL MOUNT DIRECT. Project. Type. Notes
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 35K NOMINAL LUMEN OUTPUT INPUT WATTS EFFICACY 3 lm/ft 3.25 W/ft* 93 lm/w 4 lm/ft 4.4 W/ft* 91 lm/w Flush.5 2 5 lm/ft 5.55 W/ft* 9 lm/w * Based on a 4 foot
More informationProject Name. 24 (609.6mm) 24 (609.6mm)
Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 24 (609.6mm) 24 (609.6mm) 3 (76.2mm) Formed 20 gauge cold rolled steel housing Highly reflective die-formed white painted reflector Wiring access
More informationCatalog Number. Notes
. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the
More informationNotes: 3 1/2" 89mm. 1/2" 13mm
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 1/2" 13mm 3 1/2" 89mm 12 35mm ORDERING CODE 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LIGHT DISTRIBUTION
More informationSURFACE MOUNTED. Project. Type. Notes. culus Listed Type I.C.
Project Type Notes PERFORMANCE AT 4000K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 2400 lm 22.76 W 103 lm/w 4000 lm 41.17 W 97 lm/w 5000 lm 53.46 W 94 lm/w 6500 lm 70.65 W 92 lm/w 7700 lm 85.33 W 90 lm/w
More informationCatalog Number. Notes. Type 4" (10.2) 3.2" (8.1)
Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The 4" Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing
More informationProject Name. 24 (609.6mm)
2x4 Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 48 (1,219.2mm) 3 (76.2mm) 24 (609.6mm) Formed 20 gauge cold rolled steel housing Highly reflective die-formed white painted reflector Wiring
More informationCatalog Number. Notes
Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light
More informationAvenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
Avenue A FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm
More informationAvenue A. Grid Mount. Drywall Flange. lens. Narrow aperture high performance T5/T5HO asymmetric wall wash.
FLUORESCENT drywall row mount open optic clear lens mr16 companion linear recessed wall mount DIMENSIONAL DATA Grid Mount 4.00" 101.60mm.54" 13.72mm Drywall Flange 2.20" 55.88mm 3.20" 81.28mm 4.3" 109.22mm
More informationRECESSED WALL WASH MOUNT
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEWS 3 13/32 4 3/8" 4" IC culus Listed Type I.C. SHOWN WITH LENS OPTION ORDERING CODE 2 15/16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PRODUCT SPECIFICATIONS
More informationEDGE EX44 4 x 4 Suspended Direct Linear
Project Name Date Type 4 (101.6mm) EDGE EX44 4 x 4 Suspended Direct Linear 3-3/4 (95.3mm) 4-7/16 (112.7mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationNotes: (1) not recommended with staggered lamping (2) Not available with T8 lamping.
PROJECT INFORMATION Project: Notes: Type: DIMENSIONS SECTION VIEW 3 5/8" 92mm 2 1/4 57mm ORDERING CODE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PRODUCT SPECIFICATIONS 1 PRODUCT ID 2 OPTICS 3 LENGTH (FT)
More informationMAR SERIES Fluorescent Lighting for Hazardous Locations
MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA
More informationProject Name. 23-3/4 (603.3mm)
LUCEN 2x4 Project Name Date Type ARCHITECTURAL RECESSED LUMINAIRE 3-3/4 (95.3mm) 48 (1224mm) 23-3/4 (603.3mm) Pre-painted formed 22 gauge cold rolled steel housing Highly reflective die-formed white painted
More informationUR4L 4" Series Square Adjustable Regressed Trim with Square Opening
Project Notes Fixture Type Date PAGE 1/7 ø 1-3/4" (44 mm) 4-1/2" (114 mm) 1-3/8" (34 mm) 4-7/8" (124 mm) 2-1/2" (63 mm) -25AN (illustrated) 1/8" (3 mm) SPECIFICATIONS LED MODULE LED MODULE (CONT D) DELIVERED
More informationEX3. Project Name _ K. R_x_ Rectangle. MAC JB Junction Box Movable AC
EDGE EX3 Project Name Date Type SUSPENDED DIRECT LINEAR LUMINAIRE 3-1/2 (88.9mm) 5-3/8 (136.5mm) LED Product Partner 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector
More informationUR4J 4" Series Square Downlight Regressed Trim with Square Opening
Project Notes Fixture Type Date PAGE 1/7 2-5/8" (68 mm) 4-5/16" (110 mm) 1-3/8" (34 mm) 4-7/8" (124 mm) 2-5/8" (68 mm) 1/8" (3 mm) 4-7/8" (124 mm) ø 1-5/8" (42 mm) -04BRAN (illustrated) SPECIFICATIONS
More informationArdito LED - A2RSF SPECIFICATION SHEET. 2-1/2" Series. Ultra-Thin Profile Round Regressed Shower Trim SPECIFICATIONS
PAGE 1/6 Project Notes Fixture Type Date A2RSF-22-XXX (illustrated) 2-1/2" high-efficiency dimmable LED downlight. Offered in Remodel NON-IC (with optional mounting plate), new construction NON-IC and
More informationBeams Spot (15 to 21.5 ) Narrow Flood (24 to 28.5 ) Flood (38 to 39 ) Wide (60 to 65 ) Reflectors Aluminum reflectors
6" COMMERCIAL RECESSED- Project: Type: Catalogue #: Drawn by: Date: Our commercial recessed 6 inch downlight is available for Non-IC and remodeler construction and is suitable for all commercial lighting
More informationEDGE EX33 3 x 3 Suspended Direct Linear
Project Name Date Type 3-1/4 (82.6mm) 3 x 3 Suspended Direct Linear 2-1/4 (57.2mm) 2-7/8 (73mm) Key Features 6063-T5 Extruded aluminum housing Highly reflective die-formed white painted reflector Wiring
More informationLower Optics. Upper Optics. A Acrylic diffuser G 75% Down Kit J 100% Down Kit
Linear Project: Spec Type: Catalog No: Qty Line Notes: 24x5Lx /4000K Ordering guide With FloatPlane LED, it s easier than ever to integrate sleek and sporty style into your layout and within budget. Fresh
More informationMagnaPro Hazardous Area Drop Lens Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
More informationProject: Type: Qty: Height Lamping Finish Voltage Options. Series MTRQ /8" (1252mm) /16" (551mm) Options
Project: Type: Qty: _ Series Height Lamping Finish Voltage Options Series Height Lamping Finish Voltage Options MTR Square Column 2 2 ft. 4 4 ft. 6 6 ft. Metal Halide 2H050 (2x)50w 2H070 (2x)70w T8 2T8
More informationIPS. Interior IPS. Tungsten Halogen. Metal Halide. Fluorescent. Symmetric Ceiling. Pendant. Product. Exterior 2F36-8F50. Interior.
IPS Interior IIP 906 Clear Prismatic Product Symmetric Ceiling Pendant Exterior Fluorescent Wattage Range Metal Halide Wattage Range Tungsten Halogen Wattage Range IPS Interior 2F36-8F50 292 IPS Interior
More informationLED Parking Garage. Optional motion sensor
LED Parking Garage The Element II LED luminaire is the ideal choice for efficient, worry-free parking garage lighting applications. The features and benefits of the Element II solve the lighting challenges
More informationGLASS ACT SINGLE RPD14 SUSPENDED, WALL, SURFACE
GLASS ACT SINGLE RPD14 STANDARD SIZES Ceiling, Suspended Pendant, or Single/Double-Sided Wall Mount Luminaire LAMPING LED - 90+ CRI - 2700K/3000K/3500K/4000K Output: 500lm (at 83 lm/w) per luminaire Dimming
More informationThe Tracking Magnet Surface High-tech LED lighting system for interior architecture
Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent
More information800 TO 2800 LUMEN 4 LED CYLINDER HYPERBOLIC/PARABOLIC/WALLWASH OPEN APERTURE
ENVIRONMENTALLY FRIENDLY, ENERGY EFFIIENT Lumen packages suitable for ceiling heights ranging from 8 to over 35 Efficacies up to 111 lm/w Superior-quality white LED light output using hip on oard technology
More informationSeries SKD 2"W Low Profile LED Surface Mount
FEATURES & SPECIFICATIONS INTENDED USE Full body micro silhouette makes a bold statement with a minimal design in brushed nickel powder coated finish (consult factory for other finishes). Scaled to the
More informationDL-FLEX (-UP, -UP-HO, -UP-ULTRA)
-HO -ULTRA DESCRIPTION DL-FLEX series is a unique commercial grade modular lighting system featuring 3 levels of light output with a wide range of accessories and a variety of control options. This unique
More informationNOVENTA NV3.5 SUSPENDED, WALL, SURFACE, RECESSED. STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections
NOVENTA NV3.5 SUSPENDED,, SURFACE, RECESSED STANDARD SIZES 3.5" Aperture corner profile Configurable in individual straight run sections LAMPING LED - Direct or Indirect - 80/90 CRI - 3000K/3500K/4000K
More informationHealthcare. Multi-Med Patient Room Luminaire 2x4
Healthcare Multi-Med Patient Room Project: Location: Cat.No: Type: Lamps: Notes: Qty: ME640N & ME640NLG Exam/Ambient/Reading Functions Ordering guide The Philips Day-Brite / CFI Multi-Med Patient Room
More informationProject. Type. Notes. (1) D dimming (0-10V) 5% standard
Project Type Notes PERFORMANCE AT 35K NOMINAL LUMEN OUTPUT TOTAL lm/ft INPUT WATTS EFFICACY UP DOWN 125 lm/ft 1 lm/ft 225 lm/ft 26 W/ft 87 lm/w 1 lm/ft 1 lm/ft 2 lm/ft 23 W/ft 89 lm/w 1 lm/ft 5 lm/ft 15
More informationPERIMETER - RECESSED. Regressed 3" BMPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern
Flush Regressed 2" Regressed 3" Project Type 6 7 Notes PERFORMANCE PER LINEAR FOOT AT 4K 2 3 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 11 lm/w 5 lm/ft 4.6 W/ft 19 lm/w 75 lm/ft 7. W/ft
More informationPERIMETER - RECESSED. Flush BBPRLED OPRI ( 1) 14 PRODUCT ID LINEAR OR CORNER QTY TOTAL LENGTH. 3D VIEW - Inside Corner Pattern
Regressed 4" Regressed 3" Regressed 2" Flush Project Type 8 6 15 /16 5 15 /16 Notes 4 3 2 PERFORMANCE PER LINEAR FOOT AT 4K NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 11 lm/w lm/ft 4.6
More informationPENDANT MOUNT - DIRECT
Project Type Notes PERFORMANCE PER LINEAR FOOT AT 4K CABLE 2 1 /4 STEM 2 1 /4 NOMINAL LUMEN OUTPUT INPUT WATTS* EFFICACY 4 lm/ft 3.6 W/ft 111 lm/w 5 lm/ft 4.7 W/ft 16 lm/w 75 lm/ft 7.5 W/ft 1 lm/w 1 lm/ft
More information1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC Part #: MHFL-1000W Made in the USA The powerful and efficient MHFL-1000W metal halide light fixture from Larson
More informationLinear. TruGroove Recessed
Linear TruGroove Recessed Project: Spec Type: Catalog No: Qty Line Notes: 30LxDL /4000K Ordering guide TruGroove Recessed delivers unrivaled performance and a truly innovative design making a definitive
More informationMHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
More informationLED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA
LED LINEAR CORTANA This simple and elegant suspended LED linear light with wide optics is ideal for general uniform ambient lighting applications where clean, modern architectural design is required. Use
More information131 1 x 4. Lensed Static Troffer, Grid Mount FEATURES & SPECIFICATIONS ORDERING INFORMATION
FEATURES & SPECIFICATIONS INTENDED USE 1 x 4 of applications. Troffer is ideal for all commercial and industrial SIZE W x L x H in inches (mm) 11.75W x 48.0L x 4.0Dp (300 x 1220 x 100) LAMP 1 or 2 lamp
More information