Impala/Full Size Passenger Car Fuel Tanks

Transcription

1 Fuel Tank Assemblies Impala/Full Size Passenger Car Fuel Tanks These reproduction fuel tanks are manufactured to factory specifications from stamped steel and are available in a variety of finishes to suit your build. Basic zinc coated steel tanks are a great value, offering strong corrosion resistance at a reasonable price. Ni-terne steel tanks provide an OE-quality appearance for discerning restorers. For show-quality builds, stainless steel tanks offer superior corrosion resistance with a spectacular polished finish. Zinc-Coated Fuel Tanks Quality Replacement Tank Standard Corrosion Resistance Manufactured to Factory Specifications Ni-Terne Steel Fuel Tanks OE-Quality Replacement Tank Exceptional Corrosion Resistance Manufactured to Factory Specifications Stainless Steel Fuel Tanks Show-Quality Replacement Tank Superior Corrosion Resistance Stainless Steel Polished Finish Manufactured to Factory Specifications FT4015B Fuel Tanks Correct reproduction fuel tanks for Chevrolet models. These reproduction gas tanks are manufactured to exact specifications and are available in zinc coated steel or ni-terne steel. OS2 Note: Shipped double oversize. Zinc Coated Steel FT4009A ea FT4010A ea FT4011A ea FT4013A ea FT4015A carburetor ea FT4016A fuel injection ea FT4017A 1990 fuel injection ea Station Wagon FT4008A with EEC ea FT4012A ea FT4014A ea Ni-Terne Steel FT4009B ea FT4010B ea FT4011B ea FT4013B ea FT4015B carburetor ea Fuel & Exhaust L Fuel Tanks Correct reproduction fuel tanks for Chevrolet models. These are 16 gallon capacity gas tank. These reproduction gas tanks are manufactured to exact specifications and are available in zinc coated steel or ni-terne steel or stainless steel. Note: Shipped double oversize. OS2 Zinc Coated Steel FT4000A ea FT4001A ea FT4002A ea FT4003A ea FT4004A ea FT4005A ea FT4006A ea FT4007A station wagon ea FT4008A 1970 station wagon with EEC ea Ni-Terne Steel FT4000B ea FT4001B ea FT4002B ea FT4003B ea FT4004B ea FT4005B ea FT4006B ea Stainless Steel FT4002C ea FT4003C ea FT4004C ea FT4005C ea FT4006C ea Stainless Fuel Injection Fuel Tanks Stainless steel gas tanks are a direct replacement for the OE tanks. Each tank is hand formed from 304 grade Stainless Steel and TIG welded. All tanks feature a unique baffle system to control fuel tank slosh. Each tank has baffles running front to rear, side to side, and surrounding the fuel pickups to eliminate fuel starvation during acceleration and hard braking. All fittings and mounting flanges for fuel sending units and fuel pumps are CNC machined from 304 Stainless steel stock to a thickness of 3/8" to ensure a proper seal. All tanks include an installed fuel pump and stainless steel mounting straps with hardware. All tanks have a brushed finish for easy up-keep but can be easily polished to a show finish. Important: Fuel sending unit is not included with tank. Note: Shipped double oversize. No further discounts apply. OS2 Stainless Steel Fuel Tanks w/pump ea w/pump ea w/pump ea w/pump ea w/pump ea w/pump ea w/pump ea Replacement Parts P fuel pump ea ohm sender ea ohm sender ea S filter screen ea 520 Fuel Tank Assemblies Toll Free Order Line

2 Fuel Tank Components Fuel Tank Sending Unit Screw Correct replacement GM37CFI Fuel Injected Classic Tanks A turn key fuel tank that comes with an integrated sender and fuel pump assembly completely installed, just plug and play. Manufactured using Americanmade specially coated Ni-Tern LT35 steel. Built with precise, original mounting strap depressions. Square and round welds to match original specs. Each tank has an in-tank high capacity fuel pump that is PSI/50-60 GPH. Each features a 0-95 ohm fuel sender. Important: Will not fi t station wagon models. OS2 Note: Shipped double oversize. GM37CFI Bel Air ea GM37CFI Biscayne ea GM37CFI 1966 Caprice ea GM37CFI Impala ea Fuel Tank And Muffl er Stencils The steel sheets used to produce fuel tanks and mufflers featured manufacturer name and date code markings. These stencils make it possible to correctly mark mufflers and fuel tanks for an A A A accurate restoration. Fuel Tank or Muffler A Armco Steel ea A Armco Steel ea A Armco Steel ea A Armco Steel ea A Armco Steel ea A Pittsburgh Steel ea A Pittsburgh Steel ea A Pittsburgh Steel ea A Pittsburgh Steel ea A Pittsburgh Steel ea Fuel Tank A USS Steel ea A USS Steel ea A USS Steel ea A USS Steel ea A USS Steel ea A USS Steel ea Fuel Tank Sending Units Reproduction fuel tank sending units for models. Each sending unit will install as original and allow your fuel tank gauge to give the proper reading. Replace your nonworking fuel sending unit with a new, more accurate unit. * For wagon models only. For wagon and El Camino models only Reproduction Sending Units GTS w/5/16" line ea w/3/8" line ea /16" line ea /8" line ea GTS009R /8" line, 1/4" return ea OER Reproduction Sending Units w/5/16" line ea w/3/8" line ea * /16" line, OER ea /16" line ea /8" line ea Fuel Tank Sending Units Reproduction fuel tank sending units for models. Each sending unit will install as original and allow your fuel tank gauge to give the proper reading. CX /8" line ea G Fuel Tank Sending Units Original GM fuel tank sending units for models. Each sending unit will install as original and allow your fuel tank gauge to display properly. Replace your non-working fuel sending unit with a new, more accurate unit. Sedan Models G ea G ea Wagon Models G w/code BAH ea G ea Fuel Tank Gauge Float Filter Correct replacement of the original fuel tank float strainer. This K404 will keep dirt and other elements from clogging or entering the fuel system. This part attaches directly to the fuel tank sending unit. K404 5/16" reproduction ea K405 3/8" reproduction ea G6979 3/8" GM ea Sending Unit Locking Ring Correct replacement locking ring which connects the fuel tank sending unit to the fuel tank. This locking ring replaces the original which are commonly destroyed when they are being removed. This ring helps to seal the sending unit gasket to the tank passenger ea wagon ea E reproduction ea G GM ea Fuel Tank Vent Valve Reproduction plastic fuel tank vent valve that mounts on the frame rail. This valve is commonly broken or missing. A cotton ball was originally installed at the factory to keep dirt from entering the tank (not included). One vapor line comes off of fuel tank and goes to this valve ea fuel tank sending unit mounting screws for all models. B set Fuel Tank Sending Unit Gasket Correct replacement gasket which is used between the sending unit and the locking ring. Available for early and late model full size models passenger ea wagon ea E reproduction ea G GM ea Fuel Tank Sending Unit Installation Sets Correct reproduction fuel tank sending unit installation sets for Impala/full size FT5031 chevrolet cars. FT screws/gasket set FT lock ring/gasket set FT lock ring/gasket set Fuel Sending Unit Float Brass sending unit float that helps send accurate readings to your gauge ea Fuel Tank Sender Lock Ring Tool A handy tool used to remove/install the fuel tank sending unit lock ring on full size models. CX ea Driven Carb Defender This additive controls combustion chamber residue, cleaning and protecting fuel system and intake tract surfaces to keep carburetors functioning properly. Fuel Defender is ideal for everyday drivers or classics that spend time in storage between cruises and special events. One bottle treats up to 25 JG1340 gallons of ethanol-blended fuel. JG oz bottle ea JG1341 case of oz. bottles cs Max Clean Fuel Cleaner Max-Clean targets and cleans deposit build up in the intake system and combustion chamber and is effective on the entire spectrum of engines on the road. Royal Purple's Max-Clean can restore internal engine surfaces, recovering lost fuel economy and performance. RP can ea RP11723 case of 6-20 oz cans cs Fuel Tank Components 521 Fuel & Exhaust L

3 Fuel Components FT4100A FT4101A Fuel Tank Mounting Straps Reproduction fuel tank mounting straps for models produced using heavy duty preformed steel for an original appearance or long lasting stainless steel for corrosion resistance. OE Material All Models Except Wagon FT4100A gal pr FT4101A gal pr FT4102A gal pr FT4103A gal pr FT4104A pr FT4106A gal pr FT4107A gal pr FT4108A gal pr Station Wagon Models FT4110A pr FT4115A gal pr Stainless Steel All Models Except Wagon FT4100B gal pr FT4101B gal pr FT4102B gal pr FT4103B gal pr FT4104B pr FT4106B gal pr Fuel Tank Mounting Strap Bolts Use proper mounting hardware to make installation jobs easier. We offer correct replacement fuel tank strap bolts for full size Chevrolet models. B set B7592 B Fuel Tank Anti-Squeak Felt These felts insert between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. The set includes precision die cut 1/2" sponge neoprene tank to floor cushions and 2 strap to tank inserts. Universal felt measure 3' long x 1-3/4" wide and are flat with no edges. UK universal felt set K sponge neoprene set Fuel Filler Necks Reproduction fuel tank neck for full size models except wagons. Application for models also listed. These steel necks are manufactured like original for a perfect fit exc wagons ea exc wagons ea G sedan ea G wagon ea B K915 K Tank Filler Grommets Replace your missing or damaged tank filler neck grommet with this quality reproduction for full size models. This is the grommet that is installed at the top of the filler neck where it meets the fuel door. B ea K ea Tank to Filler Neck Neoprene Hose Seals inlet filler neck to tank stub neck. This hose will eliminate fuel leaks when properly installed. Each hose is produced with high quality neoprene and will last much longer than the original. K ea clamps required ea Non-Locking Gas Cap Correct reproduction gas cap for full size Chevrolet models including Impala, Bel Air and Biscayne. This is a non-locking gas cap that is for both 6 cylinder and V8 models. * Non-vented gas cap * all ea wagon ea wagon w/o EEC ea ST ST Gas Caps Correct replacement gas caps for full size Chevrolet models. Available in a non-locking cap or a locking cap that includes keys. Non-Locking Gas Caps ST ea ST ea ST ea G wagon - GM ea ST wagon ea ST ea ST wagon ea G vented - GM ea ST ea G vented - GM ea G vented, wagon - GM ea Locking Gas Caps ST ea CX all chrome ea ST ea ST wagon ea ST ea ST wagon ea ST ea clear Fuel & Exhaust L B9001A Fuel Tank Mounting Braces Correct reproduction fuel tank mounting braces for models. Each brace attaches to the bottom of the trunk floor and supports the gas tank. The fuel tank mounting straps attach to these braces. Note: Shipped oversize. EDP Coated OS1 B LH ea B RH ea B required ea B9001A required ea Weld-Thru Coated B9001W required ea Fuel Tank Filler Neck Hose Correct reproduction fuel tank filler neck hose for Impala/full size chevrolet cars. This hose joins the fuel tank with the filler neck. Includes 2 clamps. FT w/ clamps set Universal Billet Fuel Filler Assemblies These billet fuel filler assemblies will add a custom look to any car. Made from machined aluminum they offer OEM quality sealing. Assemblies include billet filler neck, custom billet locking cap with two keys, and fasteners. Assemblies are available in both clear and black anodized finishes. An optional vent kit is also available for applications where venting is required clear anodized ea black anodized ea vent kit ea 522 Fuel Components Toll Free Order Line black

4 Fuel Components Mechanical Fuel Pumps Classic Industries offers replacement fuel pumps for early and late model passenger cars. Choose from a wide range of fuel pumps specifically designed for each year and engine size. Some fuel pumps may M4513 differ slightly in appearance from original, but will fit and function correctly, offering years of service. Note: *Canada models only. **Except 1980 Police models. With AC. 6 Cylinder Engines M , w/elec. wipers ea M , w/o smog ea M , w/smog ea M ea M ea M , short can ea M ea M K, short can ea M K, long can ea M A ea M6951 * A, 2 bbl ea V8 Engines M ea M ea M ea M ea M ea M , 2 bbl ea M , 4 bbl ea M , 425HP ea M ea M , 1st design ea M , 2nd design ea M ea M ea M ea M ea M ea M ea M ea M H,K,L, 2 bbl ea M , 4 bbl. w/o AC ea M , 4 bbl. w/ac ea M , 2 bbl ea M , 4 bbl ea M S ea M V ea M R, w/ac ea M R, w/o AC ea M H,J, w/o AC ea M H,J, w/ac ea M R, w/ac ea M R,M,U ea M H,K,L, 4 bbl ea M H,K,L, 4 bbl ea M V, 2 bbl ea M6624 ** U,G,H ea M L ea M ea M N, Olds Diesel ea M L, exc. Taxi ea M L, Taxi ea M J ea M H ea M N, Olds Diesel ea M L,6, Police ea M H, exc Taxi ea M H, Taxi ea M ea M H, 2 line ea M6626 * H ea M H, 4 bbl ea M H ea M , Chevrolet ea M Y, Oldsmobile ea G3172 G Mechanical Fuel Pumps Correct service replacement fuel pump from General Motors. May differ cosmetically from original. Note: *Without wagon or Police. G w/o 4 bbl ea G w/4 bbl ea G w/4 bbl ea G w/4 bbl ea G ea G , 327 1st design ea G , 2nd design ea G , 2nd design ea G exc. hi perf ea G ea G ea G ea G , ea G , ea G ea G , 400 w/2 bbl ea G bbl., w/o AC ea G w/o AC/Police ea G6988 * bbl ea G ea G ea G cyl., 2 bbl ea G bbl. w/o AC ea G bbl. w/ac ea G w/4 bbl ea G , ea G , 305, ea G , 305, ea G J, 305-H ea G H ea GH Remanufactured AC Fuel Pumps At last, the often difficult to find AC fuel pumps are available for your passenger car as a remanufactured model. Each pump is thoroughly rebuilt including new valves, diaphragm, oil seal, and gasket. Mounting gasket is included with each pump. Pump stamping number can be found on mounting flange. Note: *With Hi-Po. GH (late) 348, # ea GH w/f.i.# ea GH , # ea GH3010 * , # ea GH3010 * , # ea GH , # ea GH , # ea GH , # ea Electric Fuel Pumps Electric fuel pumps will require additional components for installation. Please read the notes carefully to determine the correct style pump for your year and model. You may contact our technical department for more information. Note: New strainers must be used on electric pumps for warranty compliance. Fuel pump strainers are included on electric pumps without notation. If a strainer is listed in the pump description, you must order it separately. Due to electrical requirements on certain fuel pumps, models denoted with one or two asterisks (* or **) require a strainer and wire harness adaptor for installation. * use S20194 strainer & S88536 wire harness ** use S20197 strainer & S88536 wire harness use S20192 strainer. Electric Pumps V6 P /4.3-Z ea P74002 ** /4.3-Z ea P60567 ** /4.3-Z ea P74070 * /4.3-Z ea P74070 ** /4.3-Z ea V8 P /4.3-W ea P74074 * /4.3-W ea P74074 ** /4.3-W ea P74000 ** E ea P74070 * E ea P74070 ** E ea P N, Olds Diesel ea P74000 ** ea P74070 * ea P74070 ** ea P74037 ** P, Caprice ea P74074 ** P, Impala ea P74037 ** P ea P74074 ** P ea Strainers & Harness New strainers must be used on electric pumps for warranty compliance. Due to electrical requirements on certain fuel pumps, models noted above with one or two asterisks (* or **) require a strainer and wire harness adaptor for installation. S20192 strainer ea S20197 strainer ea S88536 wire harness ea Fuel Components P74000 Holley Chrome Fuel Pumps Replace your original fuel pump with a genuine Holley triple chrome plated fuel pump. Each hi-volume mechanical fuel pump flows 60 gallons per hour at 7-1/2 PSI. Features include an adjustable lower housing allowing 360 degree rotation of fuel inletoutlet fittings for custom installations. Applications to fit small block and big block engines. 3/8" NPT inlet and outlet small block ea big block ea 523 Fuel & Exhaust L

5 Fuel Filters GF48 GF Fuel Filters Reproduction fuel filter for full size Chevrolet models. Replaces the original glass bowl in-line fuel filter assembly. Replacement filter elements and reproduction glass bowls are also available. Glass bows feature original style AC markings. Filter Assemblies TF dual 4 bbl ea GF all 5/16" fuel line ea GF ci exc 3x2bbl ea GF ci high peform ea GF ci exc 2x4bbl ea GF ci 340hp ea GF ci 425hp ea GF , 283 & 327ci ea Replacement Parts GF48A filter element with gasket ea TF glass bowl with gasket ea Fuel Filter Superior quality reproduction fuel filter designed for full size models. This fuel filter offers an original appearance and fit with correct AC logo and markings. Single inlet, dual outlet. FF ea T9245 Clear Chrome Fuel Filter Visually inspect the condition of the element. Includes high polished chrome plating for a custom appearance. Not for fuel injection systems. T9245 3/8" inlet and outlet ea T9247 5/16" inlet and outlet ea Bronze Element Chrome Fuel Filter Includes 3/8" diameter straight thru inlet and outlet. Free flowing replaceable bronze element. High quality triple chrome plating. Includes filter with clamps. Not for fuel injection systems. T9407 3/8" ea Carburetor Inlet Fuel Filter Reproduction fuel filter for full size models. These are original Delco fuel filters that are mounted in the carburetor fuel inlet. This item is a service replacement part manufactured by Delco and may differ cosmetically from the originally installed item. D ea Fuel Pump Vacuum/Pressure Tester Tests for fuel line pressure and vacuum leaks. Check for leaky valves, timing, fuel pump, vacuum, pressure and gas line leakage. Easy to read gauge with 3 foot hose and vacuum hose adapter fitting. Gauge measures vacuum from 0 to 28" HG in 1" increments. (0 to 700mm HG in 50mm increments). Measures pressure from 0 to 15 psi in 1/2 psi increments (0-1Kg/cm2 in.1 Kg/cm2 increments). Y ea Fuel Pump Safety Switch This fuel pump safety switch shuts off fuel flow whenever oil pressure drops below 15 psi. This adds a safety factor in case of an accident or engine stall. Designed for 12 volt electrical systems and can be teed into the oil pressure sending unit with an 1/8" NPT tee fuel pump safety switch ea Fuel & Exhaust L 1969 Fuel Filter Bracket Reproduction fuel filter bracket for 1969 big block engines with Quadrajet carburetor. Produced from original material electroplate and galvanized. K ea T9212 Straight Chrome Fuel Filter Disposable in-line filter with chrome housing and paper element. Dress your engine compartment and protect it from harmful contaminates. Not for fuel injection systems. T9177 3/8" inlet and outlet ea T9212 5/16" inlet and outlet ea G Fuel Filter Springs Spring assembly which fits into the carburetor body and keeps tension on the fuel filter. Choose the bbl. or 4 bbl. spring, or the bbl. quadrajet spring. 2 bbl. and 4 bbl. Carburetors JT ea 4 bbl. Quadrajet Carburetors JT ea 524 Fuel Filters Toll Free Order Line G Fuel Vapor Charcoal Canister Original GM fuel vapor charcoal canister used to help cut down or eliminate fuel vapors. Essential part of the fuel and emissions system. G H California ea G ports, 1 term ea G ea G E ea G all ea G all ea G all ea Electric Fuel Pumps These externally-mounted electric fuel pumps are ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT inlets and outlets along with an externally accessible pressure relief valve. Available in a range of pressures with the choice of chrome or cadmium-plated housings. Note: Not for fuel-injected engines. Pumps that produce more than 7 psi should be used with a pressure regulator. Chrome Housing 62531C 100 GPH 7 PSI fuel pump ea 62541C 120 GPH 14 PSI fuel pump ea 62561C 140 GPH 9 PSI fuel pump ea Cadmium Housing GPH 7 PSI fuel pump ea GPH 14 PSI fuel pump ea GPH 9 PSI fuel pump ea

6 Electric Fuel Components Low Profi le Fuel Line Disconnect Set Easily disconnect fuel injection quick connect fuel lines in hard-to-reach locations. 3/8" adapters work on GM fuel lines. 5/16" adapters work on Ford and Chrysler applications set Micro Electric Fuel Pump This compact electric fuel pump is compatible with all gasoline fuels and additives. The solid state design has a low current draw of around one amp and makes a good stand alone pump or booster pump. Designed for carbureted vehicles with a 12 volt negative ground electrical system, this pump supports 4-7 psi at up to 35 gph. Include fittings, mounting hardware and instructions. Note: Not for diesel applications micro electric fuel pump ea E Inline Fuel Pressure Gauge Set and monitor fuel pressure with these easy-to-use gauges! Simply splice into the existing carburetor line to with the anodized aluminum fuel block and 3/8" nipples. Each gauge measures 1-1/2" in diameter with a 0-15 psi range in 1/2 lb increments. Gauges are available in standard form or liquid filled for better vibration resistance standard gauge ea liquid filled gauge ea Edelbrock Pump To Carburetor Fuel Line These high-quality fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet to Edelbrock Single-Feed or Dual-Feed fuel inlet kits. These hose kits are pre-assembled hose with hose ends and are available with stainless steel braided hose or black nylon fabric ProClassic hose. Stainless Steel Braided Hose E8123 small block ea E8124 big block ea Pro Classic Hose E81233 small block ea E81243 big block ea Universal Fuel Pump Relay This universal fuel pump relay will ensure proper wiring which to reduce the risk of damaging the fuel pump, and offers consistent fuel pressure. This relay is used with fuel pump part# E1791 or E1792. E ea In-Line Street/Strip Electric Fuel Pump This in-line electric fuel pump is continuous duty rated and is ideal for EFI applications that require additional pumping capabilities for upgraded modifications. Works superbly as either an in-line booster pump or as a stand-alone unit. Use with EFI regulator part# E1728 for adjustability from 35 to 90 PSI. 57 GPH, 3/8" hose barb fittings. E ea Quiet-Flo Electric Fuel Pumps State-of-the-art electric fuel pumps offer maximum performance in a compact package for carbureted applications. Anodized aluminum housing and high quality internals make it both strong and extremely durable. The E1791 electric fuel pump is factory set to 6.5 PSI does not require a regulator. 3/8" inlet/outlet, 120 GPH free-flow, up to 600 HP. The E1792 electric fuel pump is preset to 12 PSI and requires an external regulator. 1/2" inlet/outlet, 160 GPH freeflow, up to 1000 HP. Important: For proper installation and voltage requirements, use fuel pump relay E1795. E PSI ea E PSI ea Quiet-Flo Electric Fuel Pumps This anodized aluminum EFI fuel pump offers maximum performance in a compact package. Its rugged housing and high quality internals make it both strong and durable. The in-line design keeps the pump motor and components cool even under harsh conditions. Features -10AN inlet/outlet with a flow rate of up to 80 GPH at 45 PSI for high-hp fuel injected applications. This fuel pump supports 835 HP at 12 volts with a current draw of 12 AMPS at 45 PSI. 10AN inlet/outlet 80 GPH at 45 PSI. Important: Dimensions: 6-7/8" X 3-1/4". E ea Quiet-Flo Electric Fuel Pumps For huge horsepower from an EFI engine, this external fuel pump offers the ultimate performance in a compact package. Anodized aluminum housing and high quality internals make it both strong and durable. The in-line design keeps the pump motor and components cool even under harsh conditions. Features a -12AN inlet/outlet with a flow rate up to 120 GPH at 45 PSI, and is compatible with all grades of gasoline and methanol type fuel. Each pump is factory tested and includes mounting brackets. This fuel pump supports up to 1040 HP at 12 volts, drawing 18 AMPS at 70 PSI. 12AN inlet/ outlet 120 GPH at 45 PSI. Important: Dimensions: 7" X 3". E ea Fuel Pressure Regulators For those who want the best! These fuel pressure regulators are machined from aircraft quality aluminum and have fluorosilicone diaphragm material for high temperature protection and extended life. The E1728 features dual -6AN inlet ports, a single -6AN outlet and a -6AN external bypass. Compatible with all grades of gasoline and methanol fuels. Adjustable from 35 PSI to 90 PSI and have 1/8" NPT gauge ports. 180 GPH, w/- 6AN inlet/outlet, PSI for EFI. E ea Fuel Pressure Regulators For those who want the best! These fuel pressure regulators are machined from aircraft quality aluminum and have fluorosilicone diaphragm material for high temperature protection and extended life. The E1729 has a longer body and dual -10AN inlet ports, a single -10AN outlet and a -6AN external bypass. They are compatible with all grades of gasoline and methanol fuels. Both units are adjustable from 35 PSI to 90 PSI and have 1/8" NPT gauge ports. 180 GPH, w/-10an inlet/outlet, PSI for EFI. E ea Fuel Pressure Regulator This fuel pressure regulator is machined from aircraft quality aluminum with fluorosilicone diaphragm material for high temperature protection and extended life. This fuel pressure regulator has a single 3/8" NPT inlet and dual 3/8" NPT outlets for carbureted applications and is adjustable from 5 PSI to 10 PSI, providing extremely consistent pressure regulation. Compatible with all grades of gasoline and methanol, and has a 1/8" NPT gauge port. Includes mounting brackets and hardware. 160 GPH, 5 PSI to 10 PSI for carburetors. E ea Electric Fuel Components 525 Fuel & Exhaust L

7 Fuel & Exhaust L Flames Bow Tie SS SB Fuel Pump Bolts Dress up your full size Chevrolet with these one-of-a kind dress-up bolt sets. Logo is stamped directly onto the head of the bolts. They are available in decorative chrome plated or polished stainless steel versions. What better way to make a statement than with these unique bolts. Note: Must specify logo prefi x C=Flames, D=Bow Tie, E=SS logo, G= C chrome set 56460S stainless set AR43161 Fuel Pump Bolt Sets Make sure that mechanical fuel pumps stay properly aligned by using ARP s durable black oxide finished chrome moly or rust-proof stainless bolts (both materials are rated at 170,000 psi and considerably stronger than Grade 8 hardware). Your choice of either conventional hex heads or 12-point head. Washers are included. Made in USA. Hex Head AR13162 black oxide set AR43162 stainless set 12-Point AR13161 black oxide set AR43161 stainless set Fuel Pump Bolt Sets If you want to really dress your engine, then take a look at these polished stainless steel or polished chrome fuel pump bolts. These are the original style hex-head bolts for all small block or big block fuel pumps. Includes a set for installation of one fuel pump. AK116A polished chrome set AK116B polished stainless set Fuel Pump Mounting Bolts Correct small head 3/8" bolts with lock washers. Available for all 8 cylinders small block or big block models small block pr big block pr Fuel Components D D Bow Tie Fuel Pump Block Off Plate The Bow Tie never goes out of style and neither do these official Chevrolet chrome block off plates. Covers the hole on engine where fuel pump normally goes when using an electric fuel pump. Available for big blocks and small blocks. Includes a non-asbestos gasket. D small block ea D big block ea Fuel Pump Relay Located under the hood, mounted on the LH side of the firewall, the fuel pump relay may become inoperative due to excessive heat and electrical loads. Replace the burned out fuel pump relay in your full size passenger car with one of these high quality reproduction and get the fuel flowing once again L ea L ea ea ea ea Fuel Pump Mounting Plate This plate is used to cover the large access area for the fuel pump push rod, and provides a mounting surface for the fuel pump on V-8 small block engines, or 348 and 409 engines. Features 1 pump arm opening and 4 mounting holes. G ea Fuel Pump Push Rod Correct fuel pump push rod for all V8 engines, small block or big block without x2 bbl ea Fuel Pump Mounting Gasket The original gasket mounts between the fuel pump and the engine block providing an air and water tight seal for the fuel pump. For small block or big block models with mechanical pump. G6993 all ea Fuel Hose Pinch Clamp Reproduction green pinch clamp for 3/8" fuel hose. These clamps are commonly found on the hose connecting the fuel tank float to the main fuel line leading to the engine. K ea Vapor Return Hose Line Clamp Reproduction red pinch clamp for 1/4" gas hose. These clamps are commonly found on the fuel vapor return line connecting the fuel tank float to the fuel pump vapor return line. K ea Fuel Hose Sets Fuel Hose Set This set is designed to replace the fuel hoses on single one piece gas lines. Includes correct 12" forward fuel line hose (near fuel pump) and 5-1/4" rear fuel line hose (near fuel tank) with 4 clamps. K set 526 Fuel Pump Components Toll Free Order Line K0061 Correct replacement fuel hose for all models equipped with 4 bbl. carburetors. For models with or without vapor return line. Includes correct size hose with mounting clamps. K0061 w/o return set K0096 w/return set Emissions Hose Stamps On GM assembly lines, hoses were marked to verify correct installation. These stamps were used to identify emissions hose size and placement. A A / ea A / ea A / ea SWAN Fuel Hose Stamp Put an authentic touch on your restoration by marking your fuel lines. This stamp was used by hose supplier SWAN on all rubber fuel hose that connected the main fuel line to the fuel sending unit and fuel pump. A ea GM Fuel Hose Stamps On GM assembly lines, hoses were marked to verify correct installation. These stamps were used to identify hose size and placement. 1/4" hose was used for fuel return hose, 5/16" and 3/8" was A used for main fuel lines. A / ea A / ea A / ea Fuel Hose Stamp On GM assembly lines, hoses were marked to verify correct installation. This stamp was used to identify fuel hoses and was stamped about every 1". A GAS ea Trunk Vapor Hose Stamp On GM assembly lines, hoses were marked to verify correct installation. This stamp were used to identify hose on GM vehicles with an in trunk fuel filler neck vapor system. A ea Hose Marking Ink Pad This pre-inked ink pad is the correct frost white ink for marking hoses. The slow-drying water based ink makes mistakes easy to correct before the ink becomes permanent. A white ink ea

8 Full Length Fuel Lines Correct reproduction fuel lines which extend from the fuel tank to the fuel pump and fuel pump to carburetor. You can choose between OEM material lines which were factory original or stainless steel reproduction fuel lines which add corrosion resistance. Each fuel line is produced and guaranteed to fit perfectly! Replacing your fuel lines can improve your fuel system while retaining originality. Fuel Lines Fuel Pump to Carburetor Lines BPC6602 BGL Original Material Fuel Lines Note: Shipped double oversize. OS2 BGL big block 3/8" fuel line - 3 piece set BGL small block 5/16" fuel line - 1 piece ea BGL big block 3/8" fuel line - 3 piece set BGL small block 5/16" fuel line - 1 piece ea BGL small block 5/16" fuel line - 1 piece ea BGL /8" line station wagon - 1 piece ea BGL SS small block 3/8" fuel line - 3 piece set BGL big block 3/8" fuel line - 3 piece set BGL /8" station wagon piece set BGL /4" return line piece ea BGL small block 5/16" fuel line - 1 piece ea BGL big block 3/8" fuel line - 1 piece ea BGL small block 5/16" fuel line ea BGL big block 3/8" fuel line ea BGL /4" return line ea BGL /4" return line ea BGL small block 5/16" fuel line ea BGL big block 3/8" fuel line ea BGL /4" return line ea BGL /4" return line ea BGL /8" main line ea BGL /16" vapor line ea Stainless Steel Fuel Lines Note: Shipped double oversize. OS2 BGL5801S 1958 big block 3/8" fuel line - 3 piece set BGL5802S 1958 small block 5/16" fuel line - 1 piece ea BGL5901S big block 3/8" fuel line - 3 piece set BGL5902S small block 5/16" fuel line - 1 piece ea BGL6202S small block 5/16" fuel line - 1 piece ea BGL6203S /8" line station wagon - 1 piece ea BGL6301S SS small block 3/8" fuel line - 3 piece set BGL6301S big block 3/8" fuel line - 3 piece set BGL6302S /8" station wagon piece set BGL6303S /4" return line piece ea BGL6501S small block 5/16" fuel line - 1 piece ea BGL6502S big block 3/8" fuel line - 1 piece ea BGL6701S small block 5/16" fuel line ea BGL6702S big block 3/8" fuel line ea BGL6703S /4" return line ea BGL6803S /4" return line ea BGL6901S 1969 small block 5/16" fuel line ea BGL6902S 1969 big block 3/8" fuel line ea BGL6903S /4" return line ea BGL7001S /4" return line ea BGL7002S /8" main line ea BGL7003S /16" vapor line ea Fuel Tank Vent Line Set Replace the original worn out fuel tank vent line with Classic Industries OEM style reproduction. Each fuel line represents a quality crafted line bent to exacting proportions for easy installation and originality. Original Material BFV trunk mounted vent line - hardtop set BFV trunk mounted vent line - convertible set Stainless Material BFV6601S trunk mounted vent line - hardtop set BFV6901S trunk mounted vent line - convertible set Original Material BPC , 3x2 carburetor, 5 lines, 6 fittings ea BPC , 4 bbl. with AC ea BPC , 3x2, vacuum 2nd line set ea BPC , 4 bbl, w/o AC ea BPC , 3x2 carburetor, 3 line set ea BPC5901F /way brass adapter for BPC ea BPC , 2 bbl ea BPC /250 hp ea BPC /300 hp - L74, 2 pieces ea BPC , 6 cylinder ea BPC , 2x4 bbl., 2 lines, 5 fittings ea BPC /340hp, with 2 fittings - chrome ea BPC , 1/4" return with fittings - chrome ea CPC , 2 bbl ea BPC , 2 bbl ea BPC /275HP w/carter carburetor ea BPC with Quadrajet ea FPC /275hp, 5/16" line ea FPC /275hp, 3/8" line ea FPC /325hp, with Quadrajet ea BPC with Quadrajet ea BPC SS Quadrajet - 3 piece ea FPC , 2 bbl ea BPC with Quadrajet, 3 lines ea Stainless Material BPC5801S , 3x2 carburetor, 5 lines, 6 fittings ea 348, 4 bbl. with AC ea BPC5802S 1958 BPC5803S , 3x2, vacuum 2nd line set ea 348, 4 bbl, w/o AC ea BPC5804S BPC5901S , 3x2 carburetor, 3 line set ea 4/way brass adapter for BPC5901S ea BPC5901F BPC5903S , 2 bbl ea BPC6201S /250 hp ea BPC6202S /300 hp, 2 pieces ea BPC6206S , 6 cylinder ea BPC6209S , 2x4 bbl., 2 lines, 5 fittings ea 283, 2 bbl ea CPC6502S 1965 BPC6602S , 2 bbl ea BPC6604S /275HP w/carter carburetor ea BPC6609S with Quadrajet ea FPC6705S /275hp, 5/16" line ea FPC6707S /275hp, 3/8" line ea FPC6709S /325hp, with Quadrajet ea BPC6709S with Quadrajet ea BPC6803S SS Quadrajet - 3 piece ea FPC6901S , 2 bbl ea BPC6903S with Quadrajet, 3 lines ea K0094 Fuel and Brake Line Clips Correct clip for attaching fuel and brake lines to the frame on various GM models. These clips are designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is 3/8", bolt not included. K22163 each ea K0094 set of set Fuel Line Clip Set Reproduction fuel line clip set for Impala and full size Chevrolet models. Each set includes the correct number of clips and bolts. GLC set GLC /8" line set GLC return set GLC /8" line set Fuel Lines GLC Fuel & Exhaust L

9 Remanufactured Carburetors Small Block 4 bbl. Carburetors These Rochester carburetors are remanufactured to original specifications. These are replacement carburetors which include a current production date ea ea , ea ea ea , ea , ea ea ea ea ea ea , ea , ea , ea Cal. closed loop ea , 350 w/o computer ea , 350 w/o computer ea , 350 closed loop ea 1304A Cylinder 1 and 2 bbl Carburetors We offer quality replacement carburetors for 6 cylinder full size models. These Rochester carburetors are remanufactured to original specifications. These are replacement carburetors which include a current production date. 1304A ea ea , 230, 250 w/at ea , 230, 250 w/mt ea , ea , ea , ea ea ea ea ea ea ea (3.8L) ea (3.8L) clsd lp ea (3.8L) clsd lp ea (3.8L) w/o cmptr ea 2523 Fuel & Exhaust L Small Block 2 bbl. Carburetors We offer quality replacement carburetors for 283, 305, 307, 327, or bbl. full size models. These Rochester carburetors are remanufactured to original specification. These are replacement carburetors which include a current production date , ea ea ea ea ea ea , 307, ea ea , 350, 396 w/rmt chk ea 2539A ea , ea , 350, ea ea , ea ea 2574A , ea , ea ea , ea Federal ea California ea Federal ea California ea ea (4.4L) ea (4.4L) closed loop ea Big Block 4 bbl. Carburetors Rochester carburetors are remanufactured to original specifications which include a current production date. All have original style manual, electric, climatic or remote choke, and new electronic parts if computer controlled , ea , ea 4362A , 402, ea 4363A , ea 4372A , ea ea ea ea ea 528 Carburetors Toll Free Order Line A

10 Edelbrock Carburetors Thunder Carburetors The Thunder Series carburetors share all the performance advantages of the popular Performer Series but with innovative new features. The Quick-Tune secondary air valve can be easily adjusted to match your needs. Whether you want the secondaries to "kick in" early or late, you can set the air valve using standard tools, with no extra springs. Its a quick and simple process. These carburetors include all of the performance features of the Performer Series carburetors and also include distinctive black hardware, dual fuel inlets (shipped with left side plugged), lightweight ball-burnished and CNC-profiled body, and the Quick-Tune secondary. They re available in 650 CFM and 800 CFM sizes with manual or electric choke. There s even an 800 CFM version specifically designed for off road vehicles. These Edelbrock carburetors bolt-on and run right out of the box! Simply dependable, proven performance for almost any carbureted vehicle. All Edelbrock carburetors come with an installation kit and owners manual. EnduraShine Finish The EnduraShine finish carburetors offer an everlasting show quality appearance, extreme durability and unmatched performance. The durable finish won t turn blue like chrome and it doesn t require countless hours of polishing and maintenance to maintain the everlasting shine. These bright silver chrome finish carburetors are powder coated for durability. The clear top coat enhances the polished aluminum look for a great appearance. Performer Carburetors Performer Series carburetors complete the Edelbrock Power Package System for a smooth running and great performing "no guesswork" parts combination. By design, Performer Series square-bore carburetors are refined to provide the widest possible torque range when matched with Edelbrock Performer, Performer RPM, RPM Air-Gap or Torker II manifold and camshaft combinations. However, these carburetors are not limited to these applications, they also match well with most stock and other manifolds of similar design. Performer Series square-bore carburetors are all aluminum, ball burnished and lightweight. There are no power valves to blow out or plastic parts to break. The two piece construction resists warping and the metering rods can be changed in seconds without removing the carburetor. These Edelbrock carburetors bolt-on and run right out of the box! Simply dependable, proven performance for almost any carbureted vehicle. All Edelbrock carburetors come with an installation kit and owners manual. E CFM Carburetors Recommended for most Performer applications and small cubic-inch Torker II applications. E CFM manual choke ea E CFM manual choke with EnduraShine Finish ea E CFM electric choke ea E CFM electric choke with EnduraShine Finish ea 800 CFM Carburetors Recommended for most small block Performer RPM or Torker II applications and big block Performer applications. E CFM manual choke ea E CFM manual choke with EnduraShine Finish ea E CFM electric choke ea E CFM electric choke with EnduraShine Finish ea 650 CFM Off Road Carburetors The new Thunder Series off road carbs include spring loaded needles and seats for outstanding performance in rough terrain. E CFM manual choke ea E CFM electric choke ea Dual Feed Fuel Lines for Thunder Series Carbs Designed especially for the new Thunder Series AVS carburetors, these dual feed lines include chromed parts and a stainless steel braided line for high quality looks and performance. Available with or without fuel filter. Replacement filters are also available separately. E8133 w/blue anodized fuel filter ea E8128 w/polished aluminum fuel filter ea E8132 with 3/8" barbed end and no filter ea E8130 blue anodized fuel filter only ea E8129 polished aluminum fuel filter only ea E CFM Carburetors Recommended for small cubic-inch Performer and dual quad applications. Includes both timed and full vacuum ports for ignition advance. E CFM manual choke ea E CFM electric choke ea 600 CFM 50-State Legal Electric Choke Carburetor 50 state street legal for all 1980 and earlier GM V8s (E.O. #D ). Calibrated for maximum fuel economy. Includes timed vacuum ports, EGR and fuel vapor outlet. E CFM electric choke ea 600 CFM Carburetors Recommended for most Performer applications and small cubic-inch Torker II applications. Includes both timed and full vacuum ports for ignition advance. E CFM manual choke ea E CFM manual choke with EnduraShine Finish ea E CFM electric choke ea E CFM electric choke with EnduraShine Finish ea 750 CFM Carburetors Recommended for most Performer RPM or Torker II applications and 402 c.i. Performer applications. Provides excellent fuel economy when used on 454 c.i. Performer applications. Includes both timed and full vacuum ports for ignition advance. E CFM manual choke ea E CFM electric choke ea EPS 800 CFM Carburetors The new EPS 800 carb is designed and calibrated for street high-performance engines. Dyno tests show that the EPS 800 carb outperformed a Holley #3310 carb out of the box by 26 ft/lbs. of torque and 22 horsepower on a small block Chevy equipped with Performer RPM components. Features include a high-capacity accelerator pump, and an improved secondary cluster design. E CFM manual choke ea E CFM electric choke ea Carburetors 529 Fuel & Exhaust L

11 Don t settle for anything less than a perfect factory original replacement! These new Holley carburetor assemblies are designed to replace the factory original exactly. Each carburetor is manufactured from the original Holley tooling ensuring an authentic and powerful replacement of the original factory installed carburetor. Carburetors 1969 Holley Carburetor Manufactured with original Holley tooling! For 1969 models equipped with a 396/375hp or 427/425hp. This 780CFM carburetor is stamped with the GM # GE and the Holley list #4346-GE. HC /375hp ea HC /425hp ea 1970 LT1 Z28 Holley Carburetor This Holley carburetor assembly for LT1-equipped 1970 models is an exact reproduction equipment, manufactured by Holley themselves, using their original tooling. Replaces GM part number on both automatic and manual transmission cars. Important: Carburetor is stamped with current manufacturing date. H AT or MT ea 600 CFM Holley Carburetor Classic offers newly re-manufactured 600 CFM Holley carburetors. They feature an original finish, vacuum secondaries, and Power Valve blowout protection. For all engines with or without air injection reactor (smog). These replacements are similar to the units installed on Z28s with cross ram induction and can be used to replace list numbers 3810S, 4410A, and Important: Throttle solenoid used on some models not included. Order separately. Carburetor is stamped with current manufacturing date CFM replacement carb ea 1969 Holley Carburetor Manufactured with original Holley tooling! For 1969 models equipped with a 427 ZL1. This is a 850CFM double pump carburetor with mechanical secondaries and the Holley list #4296. HC /425hp ZL ea 1970 Holley Carburetor This Holley carburetor assembly for 1970 models is for LS6, L78, L89, 396 and 454 high performance engines. Each carburetor is manufactured from the original Holley tooling insuring an authentic and powerful replacement of the original factory installed carburetor. Replaces GM part number for automatic transmission. Important: Carburetor is stamped with current manufacturing date. H AT ea Fuel & Exhaust L Holley Carburetor Manufactured with original Holley tooling! For models equipped with a 302 and /375hp. This is a 780CFM carburetor stamped with the GM # DZ and the Holley list #4053-DZ. HC ea HC /375hp ea Crossram Holley Carburetor Manufactured with original Holley tooling! For models equipped with a 302 and the crossram dealer option. This 585CFM double pump carburetor comes with mechanical secondaries and the Holley list #4295. Fits front or rear location. 2 required. HC ea 1970 Holley Carburetor This Holley carburetor assembly for 1970 models is for LS6, L78, L89, 396 and 454 high performance engines. Each carburetor is manufactured from the original Holley tooling insuring an authentic and powerful replacement of the original factory installed carburetor. Replaces part number for manual transmissions. Important: Carburetor is stamped with current manufacturing date. H MT ea 530 Holley Carburetors Toll Free Order Line

12 Holley 390 CFM Carburetor This Holley 4160 Series 390 CFM 4 barrel carburetor is ideal for small displacement V8 or V6 engines. It features side hung float bowls, a universal throttle lever, vacuum secondaries, and an electric choke. This is one of the simplest ways to get more performance from your engine. H CFM four barrel ea Holley Vacuum Secondary Carburetors These classic Holley 4160 Series carburetors are available in several sizes and with manual or electric choke. These carburetors feature vacuum secondaries and power valve blowout protection. All are bright chromate finish. H CFM manual choke ea H CFM electric choke ea H CFM manual choke ea H CFM electric choke ea Holley Mechanical Secondary Carburetors These classic Holley H Series double pump carburetors are available in several sizes and with manual or electric choke. These carburetors feature mechanical secondaries, center H4779 hung float bowls and power valve blowout protection. All have manual choke. H CFM manual choke ea H CFM manual choke ea H CFM manual choke ea H CFM manual choke ea H CFM manual choke ea H CFM manual choke ea Carburetors Holley Street Avenger Carburetors The Holley 4150 Series Street Avenger Series carburetors are the first true performance carbs specifically designed, dyno tested, and calibrated for performance on the street. They feature the No Trouble adjustable vacuum secondary, four vacuum ports, electric choke, external H80670 float adjustment, and the new Gen IV Power Valve. If you re looking for better throttle response, quicker acceleration, enhanced fuel economy and superior driveability, the Street Avenger carbs are your answer. H CFM four barrel ea H CFM four barrel ea H CFM four barrel ea Holley 650 CFM Carburetor This Holley 4150 Series 650 CFM 4 barrel carburetor is ideal for most moderate performance small block V8 engines. It features center hung float bowls, a universal throttle lever, vacuum secondaries, and an electric choke. This is one of the simplest ways to get more performance from your engine. H CFM electric choke ea Holley Accelerator Pump Cam Set This set will allow you to tailor accelerator pump performance to the engine s actual requirements. Each cam has a different shape to give different results. The shape of each cam directly affects the accelerator pump stroke and pump capacity. A steeply rising cam shape will give a fast, heavy fuel shot right off idle. Conversely, a gentle sloping ramp will spread the pump action over a longer period of time. H2012 includes 8 pump cams set Fuel & Exhaust L Holley Carburetors 531

13 Fuel & Exhaust L Performance Carburetors Quick Fuel Technology Hot Rod Carburetors The Hot Rod Series Carburetor Main Body Features: High-Flow Center Section Design Flat Surfaces: CNC Precision Finish Changeable Screw-In Idle Air Bleeds Changeable Screw-In High Speed Bleeds High-Performance Down-Leg Boosters except 650 CFM Electric Choke Fuel Bowl Features: Fuel Level Sight Windows Externally Adjustable Needle & Seat Dual Feed Fuel Inlet Notched Secondary Float Billet Throttle Base Plate Features: Adjustable Secondary Housing on Vacuum Secondary Models Easy Access Secondary Idle Air Flow Adjustment Strong, Lightweight Billet Aluminum Corrosion Resistant Bright Anodized Appearance Button Torx Head Throttle Plate Screws Power Valve Blow Out Protection Slip Link Linkage on Mechanical Secondary Models Billet Metering Block Features: 4 Corner Idle System on Mechanical Secondary Models Changeable Idle Feed Restrictions Durable, No Warping or Porosity Problems Secondary Jet Extensions on Mechanical Secondary Models Non-Stick Gaskets PROFORM Street Series Carbs Based on the highly successful Race Series carburetors, PROFORM street carburetors are constructed with lightweight aluminum. Fine tuning is accomplished by simply changing air bleeds, not opening up calibration restrictions with a drill bit! These dual fuel feed inlet carburetors are hand assembled in the U.S. using PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, aluminum fuel bowls, and a high performance billet throttle base plate. Mechanical Secondaries CFM electric choke ea CFM electric choke ea CFM electric choke ea CFM electric choke ea Vacuum Secondaries CFM electric choke ea CFM electric choke ea CFM electric choke ea PROFORM Race Series Carbs Finally an affordable high-performance race carburetor! PROFORM s Race Series Carburetors are hand assembled in Bowling Green, Kentucky utilizing PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, aluminum fuel bowls, and a high performance billet throttle base plate. These are square bore base plate. Mechanical Secondaries CFM no choke ea CFM no choke ea CFM no choke ea CFM no choke ea Vacuum Secondaries CFM no choke ea CFM no choke ea of carburetors is designed for street applications. Made from light-weight aluminum castings and packed full of features. Hand assembled and engine tested in the CB USA! Available in both vacuum and mechanical secondary configurations. Note This product is not CARB exempt. Products that are not CARB exempt are legal in most states, but may not be used in California or states with similar emissions laws except on pre-1976 vehicles. Mechanical Secondary Carburetors CB CFM ea CB CFM ea CB CFM ea CB CFM ea Vacuum Secondary Carburetors CB CFM ea CB CFM ea CB CFM ea Quick Fuel Technology Slayer Carburetor The 600 and 750 cfm Slayer Series carburetors are designed with the same engineering innovations and featured on all QFT products. They are designed with a secondary metering plate with CB changeable jets, eliminating the need for a costly secondary metering block. Note This product is not CARB exempt. Products that are not CARB exempt are legal in most states, but may not be used in California or states with similar emissions laws except on pre-1976 vehicles. CB CFM electric choke ea CB CFM electric choke ea Quick Fuel Technology Street Carburetors Super Street carburetors offer race performance in a lightweight, streetfriendly package. These carburetors are manufactured from aluminum and designed for maximum tunability through idle feed adjustment and power CB valve channel restrictions, as well as idle and high-rpm air bleeds. Note *Features blow-through annular booster. This product is not CARB exempt. Products that are not CARB exempt are legal in most states, but may not be used in California or states with similar emissions laws except on pre-1976 vehicles. Mechanical Secondary Carburetors CB CFM ea CB CFM annular booster ea CB * 650 CFM annular booster ea CB CFM E85 compatible ea CB CFM ea CB CFM annular booster ea CB CFM E85 compatible ea CB CFM ea CB CFM ea Vacuum Secondary Carburetors CB CFM ea CB CFM ea CB CFM ea CB CFM ea Street Demon Carburetors The Street Demon redefines the street carburetor with clean looks, brisk performance, and universal design. Available in 625 and 750 cfm, the Street Demon supports stock and mildly modified V8's with smooth, crisp throttle response. A dual bolt pattern works with most four barrel spread bore and square flange intake manifolds. Includes integrated 700R4/200R4 transmission kickdown location and electric choke. Choose from all-aluminum construction or a polymer main body design. Made in USA. Note: No further discounts apply D CFM ball burnished ea D CFM ball burnished ea D CFM polymer main body ea D CFM polymer main body ea D CFM hand polished ea D CFM hand polished ea 532 Carburetors Toll Free Order Line D1900 D1901 D1902 Demon Universal Installation Set This set contains installation hardware for most Demon 4 barrel carburetors, including mounting studs, washers, nuts, air cleaner studs, vacuum caps, throttle cable balls with bushing adapters for throttle levers and three types of base gaskets for square and spread bore carburetors, including a gasket for the Street Demon. D Demon installation set set

14 Performance Fuel Systems Street Demon TPS Set When using an electronic overdrive transmission, such as a 4L60E, with a carbureted engine, the transmission control unit requires a throttle position signal. This sensor bolts on to the carburetor and sends the proper signal to the computer. The simple design allows for easy calibration and voltage adjustments. Includes all necessary installation hardware. Made in USA. Note: No further discounts apply D1951 Street Demon TPS set set Street Demon Throttle Solenoid Set Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to automatically increase engine rpm. This throttle solenoid set from Demon Fuel systems includes the solenoid, bracket, and mounting nut. Made in the USA. D set Street Demon Cable Brackets These brackets remove the guesswork when installing a Street Demon carburetor in almost any carbureted GM application. All brackets have a clear zinc D1952 coating for corrosion protection and include installation hardware. Made in USA. Throttle Rod Adapter D1952 for mechanical linkage ea Throttle and Transmission Kickdown D1953 bracket set set Carburetor Cover Keep dirt and contaminants out of your carburetor while working on your engine with the air cleaner removed. Produced using tough plastic construction. For all 4 bbl. carburetors. 5-1/8" diameter T bbl ea MSD Atomic EFI High Horsepower Fuel Set High horsepower fuel components set for MSD Atomic EFI sets. This set supports 620 horsepower at the crankshaft and supplies more fuel to the Atomic EFI throttle body than the standard Atomic EFI fuel pump. Includes 15' of 3/8" fuel line, inline electric fuel pump, fuel filter, brackets and EFI-specific fuel line clamps set MSD Atomic EFI LS Set The Atomic EFI system makes installing and tuning an LS engine easy! Wiring is basic and there is no bulky computer to mount! A power module, an ECU, and most of the wiring harness are built into the fuel rails to keep installation simple and uncluttered. A small handheld tuner enables quick setup and custom programming. Set rev limits, fan temperatures, use nitrous inputs for target A/F and spark retard and more! Available for LS2/LS3, L92, LS7 as well as Gen III and Gen IV truck engines. Installation kits for LS1/LS6 engines available separately. Supports up to 1,000 hp. Important: **Use with Note: Fuel pump and fuel lines not included. Special order must be prepaid. No further discounts apply Gen III truck LS set Gen IV truck LS set LS2/LS3 & L set LS set ** LS1/LS6 install kit set 2900 MSD Atomic EFI Set The MSD Atomic EFI set fits all engines making up to 525 horsepower at the crankshaft. The annular ring charge injection design produces a better air/fuel mixture and distributes it evenly among the cylinders. As a result, engines idle, start and drive better with the Atomic EFI set. Throttle bodies feature 80lb. injectors and a self-calibrating throttle position sensor. The master set is complete and ready to use out of the box. It includes the EFI throttle body, electric fuel pump, fuel line and filter with hardware, power module with wide-band O2 sensor and handheld controller. Also available are the throttle body set which includes everything except for the fuel system components. Or purchase the fuel components separately. Note: Atomic EFI sets are California emissions approved for carbureted General Motors vehicles 1987 and older. E.O number D-722. No further discounts apply. Atomic EFI Master Set set Throttle Body Set set Fuel System Components for up to 525hp set Edelbrock High Pressure Fuel System Sets Upgrading to fuel injection requires a high pressure fuel system. Edelbrock offers a number options for converting a low pressure fuel system to high pressure for fuel injection installation. Return-Style Fuel System Includes high pressure fuel pump, fuel filter, supply and return hose, adjustable pressure regulator with return port, fittings, mounting brackets, and hardware. Supports up to 600 HP. Important: Requires return fi tting to be installed in fuel tank. E3604 return style fuel system set Fuel Sump Module System Fuel sump modules are fed by the low pressure fuel pump and store fuel in the under the hood before providing regulated high pressure to the fuel injectors without the need of a return system. Includes 13" x 7-3/4" x 5" sump, high pressure fuel pump and regulator pre-installed, wiring harness, fuel filters, hose, fittings, brackets and mounting hardware. Supports up to 600 HP. E psi fuel sump system set E psi fuel sump system set E-Street Universal EFI System Upgrade any carbureted V8 to electronic fuel injection with this E-Street universal throttle body EFI system! Easily installs on any intake manifold with a square flange 4150 style mount and accepts virtually any cleaner. Includes high flow four-barrel throttle body, simple-to-install wiring harness, wide band O2 sensor, computer with a pre-loaded tune, and a handheld touchscreen for easy step-by-step wireless programming. E3600 w/o fuel system set Carburetors E3604 Novice-Friendly Tuning Software With Full Parameter Controls. Self-Mapping Fuel Curve Corrects And Dials In Your Tune! Progressive Throttle Linkage Improves Driveability And Mileage. 533 Fuel & Exhaust L

15 Carburetor Components Holley Throttle Cable Bracket This chrome throttle cable bracket can be used with all 4150 and 4160 model square bore Holley carburetors. It includes dual stainless steel return springs. H2088 with springs ea TH350 Kickdown Bracket This bracket is designed to bolt to a small block V8 intake manifold and provides a convenient mounting point for the transmission kickdown bracket. H ea TH700-R4 Trans. Cable Bracket This bracket is designed to be for Holley 4150 and 4160 square bore carburetors only. It bolts onto the carburetor flange ear and provides a convenient mounting point for transmission and throttle cable. H ea Holley Vacuum Secondary Diaphragm This vacuum secondary diaphragm fits most 4150 and 4160 square bore Holly carburetors. H1354 Manual Choke Cable Manual choke cable for Holley carburetors. Cable length is 6 feet and the control knob has the Holley name prominently displayed. H45228 diaphragm ea 6 ft length ea Transfer Tube O-Ring Seals These fuel resistant O-rings will help prevent dangerous fuel leaks at your carburetors fuel transfer tube. Both old and new style O-rings are available. H2637 old style pr H10897 new style pr H34150 H10897 H45229 Manual Choke Cable Mounting Hardware This universal bracket mounts inside the vehicle under the dashboard to secure the choke control cable. The cable clamp kit is for Holley model 4010, 4150, and 4160 carburetors only. Cable Bracket H45229 universal ea Cable Clamp Kit H , 4150, & 4160 carbs set Holley Carburetor Ball Stud Set Install your Holley carburetor and hook it right up to your throttle linkage with these throttle ball studs. H202 set of four set Fuel & Exhaust L Holley Fuel Inlet Nut Correct replacement fuel inlet nut for models with Holley carburetor and 5/16" fuel lines. K required ea Holley Carburetor Clear Fuel Sight Plugs These kits will enable you to eyeball the carburetors fuel level without ever having to remove another sight plug. No muss, no fuss, no mess. Sold in pairs. H6057 clear fuel sight plugs pr Holley Fuel Lines We offer chromed copper fuel lines for Holley carburetors. The hard lines are manufactured with seamless copper tubing and are double flared at the ends with 5/8"-18 inverted flare inlets. H3439 adjustable 4150 & 4500 carbs ea H carbs ea H carbs ea Float Adjustment Tool No more slight-of-hand tricks! Easily adjust your carburetor float level with this hand float adjustment tool. 5/8" socket and built-in screwdriver blade protects your engine and hands from fuel spray ea Holley Transmission Kickdown Stud Install your Holley carburetor and hook it up right with this transmission kickdown stud. 534 Holley Carburetor Components Toll Free Order Line H2040 transmission kickdown stud ea Aluminum Power Valve Remover Tool Never damage your metering blocks again! This new aluminum power valve remover tool makes power valve removal a snap. Simply place the tool over the power valve and give it an easy turn ea

16 Carburetor Components H37485 Holley Carburetor Sets These sets are just what you need to make your Holley carburetor perform like new again. They include new gaskets, O-rings, pumps, diaphragms, needles and seats, power valves, and detailed instructions to help you step-by-step through the rebuilding process Series with Vacuum Secondaries H CFM set H CFM set H CFM set 4150 Double Pump with Mechanical Secondaries H set When your Holley carburetor is due for a performance rebuild, it s time to get a Holley TricKit Set. This set contains all the parts you ll need to perform a complete rebuild on your Holley vacuum secondary or double pumper carburetor. Plus its got extra parts related to carburetor calibration that are required to accomplish a real performance tune. These include accelerator pump discharge nozzles, accelerator pump cams, vacuum secondary springs, and extra gaskets. A carburetor exploded view and detailed tuning guide are also included. This Holley Trick Kit has it all! H37933 Holley Trickit Set set EFI Fuel Return Adapter When converting a carbureted vehicle to an EFI system that requires a fuel return system, there's no longer any need to buy an expensive fuel tank. This adapter creates a return system simply by cutting a 2-3/4" section out of any standard 2" fuel filler tube. Made from aluminum with a 3/8" fitting that points 90 degrees downward to direct fuel back to the bottom of the tank. Each set includes the adapter with two buna rubber sleeves and four stainless steel clamps for a leak proof seal fuel return line adapter set Carburetor Wedge Plate During hard acceleration the float bowls in a carburetor become uneven, causing moderate fuel starvation. This aluminum spacer tilts the carburetor forward 5 degrees to help keep it level by tilting it forward 5 degrees This spacer measures.830" at its thickest point and has a dual bolt pattern for standard Holley, Carter AFB, and Edelbrock carburetors. Note: Not legal for use on pollution controlled vehicles ea H2037 Holley Carburetor Throttle Studs Install your Holley carburetor and hook it up right with these throttle studs. Measurement based on diameter of throttle stud. H2037 7/32" diameter ea H2038 1/4" diameter ea Holley Carburetor Float Bowl Screws These are reproductions of the screws for Holley dual float carburetor bowls. This is a set of 8, 2-1/2" flat blade screws. A must when rebuilding your Holley dual float carburetor Holley float bowl screws set Holley Carburetor Gaskets These are reproductions of the gaskets for Holley dual float carburetors. This is a 2 piece set consisting of the base gasket as well as the air cleaner gasket. A must when rebuilding your Holley dual float carburetor Holley gaskets pr Holley Carburetor Gaskets H10851 We offer a selection of the most commonly needed Holley carburetor gaskets. Base Gasket & Studs H & 4160 carbs,.250" ea H & 4160 carbs, 5/16" ea Base Gasket H & 4160 carbs,.204" ea H & 4160 carbs, 5/16" ea H & 4160 carbs, 1/16" ea H & Quadrejet carbs, 1/4" ea Metering Block H , 4160 & 4165 carbs pr H , 4160 & 4165 carbs pr H , 4160 & 4165 carbs pr Fuel Bowl H , & 4160 carbs pr H carbs pr Rubber Air Cleaner Base Gasket This buna rubber air cleaner base gasket forms a positive seal between the air cleaner and the top of carburetors with a 5-1/8" neck. Designed for air cleaners with a straight lip, the gasket has a groove that fits over the lip for a superior seal against dust and debris. It can also be flipped and used on air cleaners with a rolled lip rubber air cleaner base gasket ea Holley Carburetor Air Cleaner Gaskets This circle shaped gasket is installed between the carburetor body and the base of the air cleaner. Its a must for keeping small particles of dirt from entering your engine. They measure 5" in diameter and are available in two thicknesses " diameter.060" thick ea H " diameter.200" thick ea Holley Carburetor Secondary Spring Housing Make changing your vacuum secondary spring a simple job with this quick change housing. It is simple to install on any vacuum secondary Holley carburetor. H set Holley Carburetor Secondary Spring Set This set will allow you to adjust the opening of your secondaries. Includes seven color coded springs from light to heavy. H piece set set Carburetor Components 535 Fuel & Exhaust L

17 Holley Jet Assortment Set The Holley jet assortment set is the professional way to track-tune your Holley carburetor for top performance. The set consists of two 2 each of 36 different jet sizes ranging from #64 to #99. The jets are contained in a plastic case that keep them separated and make them easily accessible. Jet sizes selected will give the broadest range of adjustment and performance for most performance carburetor applications. H36181 Carburetor Components Holley Main Jets These Holley jets are the professional way to track-tune your Holley jet assortment set set carburetor for top performance. They are sold in sets of two and are available in jet sizes ranging from #40 to #110. The jets will give the broadest range of adjustment to get the most performance out of your Holley carburetor. H12240 # pr H12241 # pr H12242 # pr H12243 # pr H12244 # pr H12245 # pr H12246 # pr H12247 # pr H12248 # pr H12249 # pr H12250 # pr H12251 # pr H12252 # pr H12253 # pr H12254 # pr H12255 # pr H12256 # pr H12257 # pr H12258 # pr H12259 # pr H12260 # pr H12261 # pr H12262 # pr H12263 # pr H12264 # pr H12265 # pr H12266 # pr H12267 # pr H12268 # pr H12269 # pr H12270 # pr H12271 # pr H12272 # pr H12273 # pr H12274 # pr H12275 # pr H12276 # pr H12277 # pr H12278 # pr H12279 # pr H12280 # pr H12281 # pr H12282 # pr H12283 # pr H12284 # pr H12285 # pr H12286 # pr H12287 # pr H12240 H12288 # pr H12289 # pr H12290 # pr H12291 # pr H12292 # pr H12293 # pr H12294 # pr H12295 # pr H12296 # pr H12297 # pr H12298 # pr H12299 # pr H # pr H # pr H # pr H # pr H # pr H # pr H # pr H # pr H # pr H # pr H # pr Street Demon Calibration Set This calibration kit allows fine tuning of Street Demon carburetors. Although the carburetors are already fine tuned other adjustments and modifications may be necessary for optimal performance in built engines with large cams. This kit includes an assortment of primary jets, metering rods and step-up springs along with secondary jets all in a convenient plastic storage case. D1921 Demon calibration set set H6506 Carburetor Needle and Seat We offer several needle and seat assemblies for Holley carburetors. The seat size determines how much fuel can flow at a certain pressure. Tune your Holley carburetor to flow the right amount of fuel at the proper pressure with a new Viton-tipped needle and seat. H adjustable ea H adjustable ea H adjustable ea H off road ea H Holley Electric Fuel Pumps We offer externally mounted Holley electric fuel pumps. They are available in ratings from 97 GPH to 140 GPH. The 97 GPH red pump is set at 7 PSI and does not require a regulator. The 110 GPH blue and the 140 GPH black pump is set at 14 PSI. The black can be used for gas or alcohol fuel. H GPH red pump ea H GPH blue pump ea H GPH black pump ea H12803 regulator 4-1/2 to 9 PSI ea Fuel & Exhaust L E1489 Edelbrock Carburetor Calibration Sets These sets include a selection of metering rods, jets, and step up springs that allow fine tuning and calibration of Edelbrock Performer and Thunder Series carburetors for mildly to extremely built motors, especially motors with performance camshafts that cause low intake manifold vacuum. Made in USA. Note: Not legal for pollution controlled vehicles. No further discounts apply. Performer Series Sets E1479 for set E1480 for 1407, 1410, 1412 & set E1486 for 1403, 1404 & set E1487 for set E1488 for set E1489 for set Thunder AVS Series Sets E1840 for 1805 & set E1841 for 1812 & set E1842 for set Holley Accelerator Pump Squirters We offer several sizes of accelerator pump squirters. Choose from straight type or tube style to fit 4150, 4160, and 4500 series carburetors. All include 2 gaskets. Straight Type H straight pr H straight pr H straight pr H straight pr H straight pr H straight pr H straight pr H straight pr Tube Type H tube pr H tube pr H tube pr H tube pr H tube pr H tube pr H tube pr H tube pr Holley Power Valves The power valve is a key component of the power enrichment system of Holley performance carburetors. These power valves incorporate power valve blowout protection. Standard Flow H " Hg ea H " Hg ea H " Hg ea H " Hg ea H " Hg ea H " Hg ea H " Hg ea High Flow H " Hg ea H " Hg ea H " Hg ea H " Hg ea H " Hg ea H " Hg ea H " Hg ea 536 Holley Carburetor Components Toll Free Order Line H12140 H12565

18 Carburetor Parts Fuel Pump Safety Switch If your motor stalls and your float sticks or if you re in an accident, your electric fuel pump will keep running, fueling a possible fire. Make your muscle car safer with this Fuel Pump Safety Switch. Wired in-line with your fuel pump, the switch monitors the tachometer signal and shuts off the fuel pump when the engine stops running. When the key is turned on, the fuel pump is allowed to prime for 3 seconds. After priming, the pump is only allowed to run when the engine is running. Internal 7.5A resettable fuse. No plumbing into oil pressure lines. No priming button needed. Works with all replacement and high performance electric fuel pumps. Made in the USA and has a 1 year warranty. Measures 2" x 1.5" x 1". RE ea 1967 Rochester Carburetor Repair Kit You ve got the original carburetor but it needs work. What do you do? You get a carburetor repair kit and fix it! This OE style repair kit is fabulous for repairing minor problems associated with original Rochester carburetors. Each repair kit includes gaskets, pump, needle and seat, float gauge, guide, ball, spring and retainer. Perfect for off-the-car repair. K MT w/2 bbl ea T2046 Carburetor Stud Kit We offer a variety of stud kits to fit just about any Holley or Rochester carburetor. Each kit includes 4 studs, 4 nuts and 4 washers. T /8" kit set T2047 2" kit set T2106 3" kit set Direct Replacement Carb Main Body Replacement carburetor main body for Holley 750 CFM (#3310) vacuum secondary carburetors. This all new main body replacement will help to enhance the look and performance of your Holley carburetor without a complete replacement C ea GM Carburetor Adjusting Tool Easily adjusts GM C-4 carburetor idle mixture screws. Flexible shaft lets you reach hard to get at screws. Reversible bit fits double-d and hex head screws. X ea Carburetor Tee Connector Cap For all bbl. Holley carburetors bbl. Holley ea Holley Carburetor Air Cleaner Stud Correct reproduction stud used to retain the air cleaner to the carburetor. This stud is for all big block models ea HC295 universal ea Carburetor Insulator Reproduction carburetor insulators for models with 235 ci inline 6 cylinder engines. Installs between the carburetor and intake manifold. CX insulator ea /32" Holley Dual-Feed Fuel Line Chrome dual-feed fuel line kits for Holley carbs. High quality gas lines specifically designed for Holley dual feed carburetors /32" inlet center to center ea /16" inlet center to center ea ED Quadrajet Carburetor Rebuild Kits Bring your original carburetor back to original working order by replacing the crucial components with this complete rebuild kit for original or Edelbrock replacement quadrajet carburetors. Each part is manufactured to exact specifications assuring a quality part and an authentic rebuild. Includes all parts and gaskets necessary for a complete rebuild. Available for models. ED CFM kit ED CFM kit H4674 H2657 H209 Holley Throttle Solenoid Components Some vehicles, especially vehicles with air conditioning, require a throttle solenoid to increase engine RPM in certain conditions. The Holley bracket is designed to be used with H4674 and H2657 carburetors. The nut and solenoid are universal and can be used as replacement components for other carburetors. H4674 throttle solenoid ea H2657 solenoid nut ea H209 solenoid bracket ea 1969 Big Block Fuel Line Y-Block Excellent reproduction of the OEM style L and COPO 9560/ engine fuel line Y-block. This brass fitting mounts to the intake manifold where the two carburetor fuel inlet lines meet. Includes correct mounting bracket. YB38B ea Fuel Lines for Edelbrock Carburetors These fuel line and filter sets fit Thunder Series or Performer Series Carburetors. Features chromed hard steel line and Russell fuel filter. The dual feed lines include a stainless steel braided flex line for highquality looks and performance. Single Feed Lines for Square Bore Carbs E8134 w/blue anodized fuel filter ea E8131 w/polished fuel filter ea E8126 w/3/8" barbed hose end, no filter ea Dual Feed Lines for Thunder Series AVS Carbs E8133 w/blue anodized fuel filter ea E8128 w/polished fuel filter ea E8132 w/3/8" barbed hose end, no filter ea Replacement Fuel Filter E8130 blue anodized fuel filter only ea E8129 polished fuel filter only ea Carburetor Parts E Fuel & Exhaust L

19 Carburetor Parts Choke Thermostat Mounting Screw This mounting screw holds the thermostatic choke assembly to the intake manifold ea K Carburetor Choke Sets Replace your damaged or worn choke assembly with these complete sets. Sets include the cover, rod, choke spring, screw and clip on rod. Small Block K all with Holley carb set K /350hp with QJ set K L78 engine set Big Block K all with Holley carb set K /325hp or 350hp QJ set K /375hp L set K , 402 with QJ set Choke Rods During a multitude of years and mechanics modifications, the choke rods can become damaged or missing. Replacing this choke rod will allow your carburetor to function correctly and keep your engine running smooth. Also includes correct attachment clip /275hp ea with hi perf ea with LT1 (Z28) ea K Remote Choke Thermostat Cover Reproduction remote choke thermostat covers for full size models with Rochester 4 bbl carburetors with the choke thermostat mounted to the intake manifold ea K L78, 396, 402 w/qj ea HRT Choke Heat Riser Tubes For efficient choke operation, make sure your choke heat tube is present and clear of obstructions. Note: *Exhaust manifold to carburetor line. OE Style Material HRT cyl ea HRT bbl ea BCH cyl., ea HRT Tri-Power ea HRT , Carter 4bbl ea HRT , Carter 4bbl ea HRT x 4bbl ea LCT bbl ea LCT bbl ea LCT w/2 x 4bbl ea LCT w/2 x 4bbl ea LCT400 * /250hp ea LCT400 * /300hp ea Stainless Steel HRT005S cyl ea HRT401S bbl ea BCH5701S cyl., ea HRT404S Tri-Power ea HRT400S , Carter 4bbl ea HRT400S , Carter 4bbl ea HRT402S x 4bbl ea Choke Tube Insulation CTC " long ea Rochester Carburetor Heat Baffl e Carburetor heat radiation baffle. For V8 full size models originally equipped with Rochester 4 barrel carburetors (without special high performance engine) all ea Carburetor Adapter Adapt a Holley or AFB 4 bbl. carburetor to a Quadrajet 4 bbl. manifold with this adaptor plate. Includes all necessary hardware. E ea Carburetor Spacer Set Easily optimize the flow rates of air and fuel in your car with this modular 1" carb spacer set! Each spacer set comes with one frame and three popular inserts: open, 4-hole, and tapered 4-hole. Dial in exactly the right flow to get the most from your motor! carburetor spacer set T2063 Holley/AFB Carburetor Spacers Carburetor spacer kits are now available for Holley carburetors. Each kit includes mounting hardware and gaskets. We offer a variety of sizes and styles for most popular GM vehicles. Open Center T2063 3/8" tall, Hiker set T2094 3/8" tall, with vacuum tube and cap set T2084 1" tall set T2103 1" tall, with 3/8" fitting for PVC set Open Center T2081 2" tall set Ported T2280 3/8" tall set T2187 1" tall, with plug for PVC hook-up set T2048 2" tall set Fuel & Exhaust L Thermostatic Choke Coil Over many years of driving, the choke coil winding can suffer from distortion, causing faulty operation. Will install as original and will ensure countless hours trouble free driving. E Holley 4bbl ea E Quadrajet ea ea Heat Shield for 4 bbl. Holley Carburetor OER manufactured heat shield for all GM models with Holley Carburetors. This heat shield will help cool the intake charge for better performance with 4 bbl ea Accelerator Throttle Rod This rod is for use when modifications will not allow the use of the original rod between the accelerator pedal lever and the carburetor. Bend and shape as needed. 14-1/2" long. Note: Not for cable operated applications. AL ea Billet Choke Covers These chrome-plated choke covers enhance the appearance of dressed engines by covering the plastic choke on Edelbrock, Demon, & Holley carburetors. Each billet aluminum cover comes with a snap-in louvered insert. Available as an individual cover or as a kit with polished stainless steel conduit choke cover ea choke cover kit ea 538 Carburetor Parts Toll Free Order Line

20 Carburetor Parts ALK Carburetor Linkage Sets Here are those hard to find linkage rods for single and multiple carb set-ups. Each set includes the necessary hardware when required. Note: *Includes 2nd rods. **Includes hardware. CLR400 * Tri-Power set CLR401 * Tri-Power set CLR w/4 bbl set ALK400 ** x 4 bbl set Carb & Throttle Arm Linkage Bushing Use this rubber bushing/plastic sleeve combo or just the plastic sleeve or bushing as a replacement for your carburetor linkage or throttle arm linkage bushings. K bushing/sleeve set Carb Linkage Bracket and Spring Chevrolet carburetor accelerator linkage bracket and spring set needed to connect 2 x 4 barrel carburetors. TF set Carburetor Rod Clip Reproduction of the carburetor rod to accelerator rod clip for full size Chevrolet car models ea T2386 Throttle Return Spring Mounts to intake manifold on drivers side. Required by many race sanctioning bodies and a great idea for any high performance car. Includes chrome brackets, springs, bushings, and fastener. T2386 big block set T2387 small block w/carb spacer set Throttle Return Spring Set Fits Holley 2300 and bbl. or Holley 4150 and bbl. carburetors mounted on any manifold. DC set Carburetor Linkage Plate Each plate is triple chrome plated for a beautiful and custom finish. For GM cables. T2333 Holley/AFB ea Quadrajet Throttle Cable Bracket This reproduction of the Quadrajet throttle cable bracket is the most correct on the market for a true restoration. Stamped with GM # Fits full size models with 327, 350, 396, 427, 454, LS5 and L34 engines with a Quadrajet carburetor ea Holley Throttle Cable Bracket Reproduction of the Holley throttle cable bracket for a true restoration. Stamped with GM # For full size models with 327, 350, 396, 427, 454, LS6, L78 and L89 engines with a Holley carburetor ea T9756 Throttle Cable Bracket Kit Chrome plated bracket set small block Chevy with cable type linkage. May be used with either round or square mounts. You do not have to remove the carburetor to install. Allows full adjustment. Note: Use T9757 also if you have a TH350 transmission. T9756 small block set T trans. kickdown bracket ea Accelerator Return Spring Correct reproduction of the commonly missing spring which inserts between the carburetor and water neck. K big block ea K big block ea cyl. outer ea K cyl. inner ea 1968 Carburetor Return Spring K0135 K0154 Correct reproduction carburetor return spring found on 396 and 427 models. Correct green color. HC ea Universal Carb Return Spring Bracket This replacement chrome universal carb return bracket is designed to replace the original bracket for most carburetors chrome ea Throttle Cable Kickdown Bracket Chrome throttle cable transmission kickdown bracket for vehicles with a TH350 transmission. T ea Morse Cable Bracket Chrome plated bracket for Holley or Quadrajet carburetor linkage plates. Can be used with part number T2333. T ea T9619 Carburetor Mount Linkage Bracket These brightly polished, chrome plated brackets can be installed on vehicles equipped with Holley carburetors. For GM cables. T9619 manual transmission ea T9620 automatic transmission ea Carburetor Parts 539 Fuel & Exhaust L

21 Full Size Chevrolet Headers Hedman Hedders Classic Industries stocks a full line of Hedman Hedders for full size Chevrolet models. These units are designed to replace the heavy, and restrictive factory manifolds with tubular steel manifolds. These Hedders are not only lighter, but will also increase your Chevrolet s performance. Tork-Step hedders feature an innovative design that allows for and increased overall torque curve. Sets are complete and ready to bolt on. Includes collector and header to head gaskets, collectors, and bolts. We offer Hedman Hedders for use with or without air injection (smog tubes). Important: Available in black only. Be sure to read the important notes listed on the bottom of this page pertaining to each header system for correct application. Note: Shipped oversize. No further discounts apply. OS1 Part# Year Engine See Notes AC PS AT Column AT Floor MT Column MT Floor Smog Notes Tube Dia. Coll. Dia. Price Y Y Y Y Y C 1-5/8" 3" set , 6, 25, 208 Y Y Y Y N N 1-3/4" 3" set , Y Y Y Y Y C 1-5/8" 3" set , 20, 208 Y Y Y Y Y Y C 1-3/4" 3" set , 5, 20, 208 Y Y Y Y Y Y C 1-3/4" 3" set Shorty 1, 6, 15, 20, 45, 208 Y Y N Y N Y C 1-3/4" 3" set Shorty 1, 6, 15, 45, 49, 208 N Y N Y N N B, D 2" 3" set Shorty 4, 5, 6, 15, 20, 208 Y Y N Y N Y C 1-3/4" 3" set Shorty 1, 4, 6, 15, 20, 208 Y Y N Y N Y C 1-3/4" 3" set , 4, 6, 103, Y Y Y N N C, N 1-5/8" 3" set Shorty 1, 4, 6, 15, 103, Y Y Y N N C, N 1-5/8" 3" set , 6, 45, 103, Y Y Y N N B, D 1-5/8" 3" set , 5, 6, 45, 103, Y Y Y N N F, K 1-5/8" 3" set Shorty 1, 6, 15, 45, 103, Y Y Y N N B, D 1-5/8" 3" set Tork-Step 1, 6, 15, 45, 103, Y Y Y N N B, D 1-1/2 x 3" set 1 5/8" D-port 1, 6, 15, 45, 103, Y Y Y N N B, D 1-5/8" 3" set Shorty 4, 5, 6, 15, 45, 103, Y Y Y N N F, N 1-5/8" 3" set Shorty 1, 6, 15, 45, 49, 103 N Y N N N Y B, D 1-5/8" 3" set Shorty 4, 5, 6, 15, 49, 103 N Y N Y N Y B, D 1-5/8" 3" set Fuel & Exhaust L Hedman Hedder Notes 1) Without smog injection or injection heads. 4) Includes parts necessary to retain emission devices. (50-State). 5) With A.I.R. system. 6) Modifi cation to stock exhaust required to retain catalytic converter. 15) Shortie hedder (Max. ground clearance). 20) Not recommended for use with aluminum heads. 25) Engine swap, all parts must be factory stock. 26) AC equipped vehicles require bracket # ) Not legal for sale or use in California on pollution controlled motor vehicles. 49) Will not fi t Saginaw close ratio P/S with 825 power steering box. 103) Will fi t with angle plug heads - Chevrolet aluminum only. 121) Must modify rotary R4 AC bracket. 208) Due to aluminum cylinder heads on GEN VI engines, 502 BB Chevy will have clearance problems on some applications. Bottom of header fl anges may hit head bolts. Notching may be necessary Doug s Headers Hedman Emission Notes B) Not applicable or intended for street or highway use. Legal only for racing vehicles which may never be used upon a highway. C) For vehicles 1964 through 1974 without A.I.R. system, considered as O.E. replacement parts when existing emission controls are not removed from vehicle. D) Not legal for sale or use in California. F) For vehicles 1964 through 1974 with A.I.R. system, considered as O.E. replacement parts and do not require an E.O. #, when existing emission controls are not removed from vehicle. K) only, 50 state legal for these years only. N) only, 50 state legal for these years only. Doug s headers are carefully developed to fit each specific vehicle application. Doug s headers are available for full size Chevrolet models with small block or big block V8 engines, with and without air-injection ports, and with console or column shifters. Heavy-duty machined and finished header flanges, the smooth mandrel bends tubes, and a protective Metallic Ceramic Thermal Barrier Coating (MCTBC) make Doug's Headers an excellent choice for exhaust system performance. Important: Headers are intended for off-highway use only and are not designed for use on California vehicles with pollution control devices. Be sure to read the important notes listed on 8304 the bottom of this page pertaining to each header system for correct application. Note: Shipped oversize. OS1 Part# Year Engine Smog See Notes AC PB PS AT Column AT Floor MT Column MT Floor Tube Dia. Coll. Dia. Port Shape Price , 92, 96, Y Y Y Y Y Y Y 1 5/8" 3" oval set Y Y N Y Y Y Y 1 3/4"-2" 2 1/2" same as head set , 92, Y Y N Y Y Y Y 1 5/8"-2" 2 1/2" oval set 93, 96, 126, , 52, 69 Y Y Y N Y N Y 1 3/4" 3" same as head set , 92, 93, Y Y Y N Y Y Y 1 5/8" 3" oval set , 69, 133 Y Y Y Y Y N N 1 3/4" 3" same as head set , 36, 92, 93, 96 Y Y Y Y Y N N 1 5/8" 3" oval set , 36, 92, 93, 96, 214 Y Y Y N N N Y 1 5/8" 3 oval set Doug s Header Notes 5) Shorty design for maximum ground clearance. 36) Fits D-Port cylinder heads including ZZ4 crate engines. 52) Will not fi t Saginaw close ratio with 825 power steering box. 69) Big block frame stands and motor mounts must be used to insure proper engine location and header fi t. 92) Will fi t most angle plug heads including factory Chevrolet "Bow-Tie" heads. 93) Vehicles with locking steering columns require linkage removal. 96) May require AC bracket ) Fits Edelbrock angle plug heads. 126) Tri-Y design. Doug s Header Notes 133) Will not fi t with Powerglide transmission. 180) Requires LS1 adapter plate set SK ) Includes 3" to 2 1/2" reducers with O2 fittings 214) Must use non-shell type motor mounts Doug s Emission Notes 3) The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission-controlled motor vehicles/motor vehicle engines (pre-1974 domestic vehicles certifi ed to California standards, pre-1974 domestic vehicles certifi ed to federal standards and all pre-1974 foreign vehicles), per the manufacturer's application guide. 540 Headers Toll Free Order Line

22 Exhaust Manifolds EMBB16P 1968 Small Block Exhaust Manifolds There's no better feeling than knowing you re replacing an integral part of your engine with correct reproductions! Each reproduction exhaust manifold is specifically designed to replace the original exactly, including correct part numbers cast into each manifold. This reproduction is regarded as the early style and does not include smog tube holes. Sold in pairs only for a complete replacement. E small block pr Fenton Small Block Headers Classic Fenton cast iron small block headers split dual exhaust systems into a unique, high-flow quad exhaust system. Universal fit for , 327 & 350 ci engines. AJ5314 small block pr EMBB17P A E Big Block Exhaust Manifolds Reproduction exhaust manifolds for full size big block models. These extremely high-quality manifolds are designed and manufactured to exact original specifications including the correct casting numbers for models. The manifolds are also correct for big blocks with the exception of the casting numbers, which were different. Reproduction manifolds were outflow tested to ensure factory equivalent specifications. We now offer your choice of manifolds for early models not equipped with air injection tubes, or manifolds with correct air injection tube hole locations. Manifolds are sold in pairs only. Without Air Injection Tube Holes EMBB16P big block pr With Air Injection Tube Holes EMBB17P big block pr A Big Block Exhaust Manifolds Long discontinued by GM, these hard-to-find exhaust manifolds are available as reproductions. These Special High Performance 427 ci big block manifolds are manufactured from heavy cast iron, as original, and feature the factory markings, lettering, and numbers. Designed without A.I.R holes. Available individually or as a pair. A LH cast# ea A RH cast# ea A LH/RH pair pr EMSB15P Small Block Exhaust Manifolds There's no better feeling than knowing you re replacing an integral part of your engine with correct reproductions! Each reproduction exhaust manifold is specifically designed to replace the original exactly, including correct part numbers cast into each manifold. This reproduction is regarded as the early style and does not include smog tube holes. Used on small block engines. Sold in pairs only for a complete replacement. Available with or without holes for Air Injection tubes. Note: *For automatic transmission only. E316 * w/o Air Injec pr EMSB15P w/air Injec pr AJ5312 Fenton 6 Cylinder Headers Classic Fenton high performance headers are here. These quality cast iron headers split single 6 cylinder exhaust systems into a high-flow, high-performance dual exhaust system. Fits all Chevrolet 6 cyl 216, 235, and 261 ci engines. AJ cylinder headers pr AJ5313 bolt set set A Ram's Horn Exhaust Manifolds These exhaust manifolds are based on the famous high performance small block Chevy Ram's Horn manifolds from the 1950's and 60's. Manufactured from heavy cast iron without air injection ports or alternator/generator bracket provisions. Available in raw cast iron, black ceramic, silver ceramic or with a heavy chrome finish. Includes mounting hardware and gaskets. Sold in pairs. Note: Not legal for use on pollution controlled vehicles. A raw cast manifolds pr A chrome manifolds pr A black ceramic manifolds pr A silver ceramic manifolds pr Exhaust Manifolds 541 Fuel & Exhaust L

23 Exhaust Parts C=Flames D=Bow Tie E=SS 56488S G=350 H= Exhaust Manifold Bolt Sets Dress up your full size Chevrolet with these one-of-a kind dress-up bolt sets. Logo is stamped directly onto the head of the bolts. They are available in decorative chrome plated or polished stainless steel versions. What better way to make a statement than with these unique bolts. Note: Must specify logo prefi x C=Flames, D=Bow Tie, E=SS logo, G=350, H=454. Chrome Header Bolts 56461C small block set 56418C small block 1" long set 56477C small block std exh set 56488C big block set 56498C w/lt-1 engine set Stainless Steel Header Bolts 56461S small block set 56418S small block 1" long set 56477S standard exhaust set 56488S big block set 56498S LT-1 engine set EML001 EML Exhaust Manifold Bolt Locks Get the factory look and keep the manifold bolts tight to help eliminate exhaust leaks. Classic Industries offers these original style reproduction exhaust manifold bolt locks designed for the purist who demands perfection. Set of 4 stainless steel. EML small block set EML , set TF Exhaust Manifold Flange Studs Reproduction exhaust manifold studs for 1958 V8 models. These studs install as original on the outlet flange where the head pipe connects. Stud sets are available in both steel and long lasting stainless steel. Sets include three 3" studs, three 2" studs and six nuts. TF steel set TF stainless steel set Exhaust Manifold Bolt & Stud Set Correct style exhaust manifold bolt and stud set will replace the rusted or broken originals. Includes 1 long bolt, 3 medium-length bolts, 7 short bolts and 1 stud small block, AC set Big Block Exhaust Manifold Bolts Reproduction of the exhaust manifold bolts for big block engines from These black, hardened bolts have the correct head markings. This is a set of 16 bolts that include correct stainless steel washers, just like original. K big block set Fuel & Exhaust L AK119A Header Bolt Set Includes all original style hex head bolts for small block or big block headers. Choose from polished stainless steel or polished chrome bolts. Small block sets include 12 bolts, and big block sets include 16 bolts. AK119A small block chrome set AK119B small block stainless set AK118A big block chrome set AK118B big block stainless set Exhaust Manifold to Pipe Stud Set Correct reproduction studs and nuts used to attach the exhaust pipes to exhaust manifold. Each set includes a set of studs for the installation of both exhaust manifolds. Includes 3 short and 3 long studs. K set Header Bolt Sets ARP manufactures premium grade bolt sets to facilitate installation of exhaust headers in both stainless steel or 8740 chrome moly steel. The Stainless 300 material is not affected by corrosion or extreme heat. What s more, the compact 12-point nut version lets you easily slip a socket close to the pipe. Each ARP bolt set includes the specific number of parts for your application, plus premium-quality washers and hex or 12-point nuts, as required. Each small block set contains 12 bolts and each big block kit contains 16 bolts. Made in USA. Small Block - 3/8" Dia. Hex Head Bolts AR1111 black oxide 3/4" long set AR4111 stainless 3/4" long set AR11111 black oxide 1" long set AR41111 stainless 1" long set Small Block - 3/8" Dia. 12-Point Bolts AR1121 black oxide 3/4" long set AR4121 stainless 3/4" long set AR11211 black oxide 1" long set AR41211 stainless 1" long set Big Block - 3/8" Dia. Hex Head Bolts AR1112 black oxide 3/4" long set AR4112 stainless 3/4" long set AR11112 black oxide 1" long set AR41112 stainless 1" long set Big Block - 3/8" Dia. 12-Point Bolts AR1122 black oxide 3/4" long set AR4122 stainless 3/4" long set AR11212 black oxide 1" long set AR41212 stainless 1" long set Big Block Exhaust Manifold Bolts Reproduction of the exhaust manifold bolts for big block engines from These are black, hardened bolts that feature the correct flanged head, just like original. Set of 16 bolts big block set 542 Exhaust Hardware Toll Free Order Line AR Small Head Header Bolt Sets Working in a tight space? These 12 piece small head bolt sets are designed to replace regular hex head bolts for easier access and fewer skinned knuckles. Available in both black oxide and zinc finishes. Black Oxide Hex Head /8"-16 x 3/4" set /8"-16 x 1" set Zinc Hex Head /8"-16 x 3/4" set /8"-16 x 1" set

24 Exhaust Parts HC Ram Horn Manifold Bolt Set Set of original type bolts to mount the ram horn exhaust manifold. K ram horn exhaust set Original GM Exhaust Clamps Factory replacement exhaust pipe clamps which are superior to aftermarket clamps. These clamps include the U-bolt, clamp closeout and two attachment nuts. Excellent for the hard core restorer. G /2" clamp ea HC OEM Style Muffl er Clamps Correct replacement muffler clamps are designed to replace the factory originals. Each clamp includes hardware. See below for correct application. Either 2" or 2-1/4" pipes. Standard Clamp HC w/2" ea HC w/2-1/4" ea Guillotine Clamp HC w/2" ea HC w/2-1/4" ea K Exhaust Manifold Bolt Set Set of original type bolts to mount exhaust manifold. Available for small block or big block. K small block set K big block set Replacement Style Steel Clamps Correct replacement style clamps for applications. Each clamp is listed as standard style or heavy duty. Please check your applications carefully before ordering " clamp std 5/16" u-bolt ea " clamp hd 3/8" u-bolt ea /4" clamp std 5/16" u-bolt ea /4" clamp hd 3/8" u-bolt ea /2" clamp hd 3/8" u-bolt ea " clamp hd 3/8" u-bolt ea Exhaust Flanges Replacement exhaust flange for full size models cyl ea cyl ea , ea ea E small block ea E big block ea Aluminum Collector Gasket Set Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts /2" collector set " collector set /2" collector set Aluminum Header Gaskets Soft conforming aluminum gaskets easily conform to the header flanges for a superior seal. Each set comes with 2 gaskets Chevy small block, square port pr Chevy big block, round port pr E243 E244 Stainless Steel Clamps Stainless or plated exhaust clamps for chambered or aluminized exhaust systems. Stainless or plated clamps offer long-lasting effectiveness over the original style non-coated clamps. E240 2" clamp stainless ea E /4" clamp stainless ea E /2" clamp stainless ea E243 2" clamp plated ea E /4" clamp plated ea E /2" clamp plated ea Exhaust Pipe Packing Gasket Original GM pipe packing was commonly used with models. This unit installs between the headpipe and exhaust manifold outlet. Heat-resistant gasket which helps prevent exhaust leaks. Measures 2-1/32" i.d. x 2-1/2" o.d. G ea Exhaust Pipe Packing Gasket This heat-resistant gasket installs between the headpipe and exhaust manifold outlet. Measures 2" i.d. x 2-1/2" o.d gasket ea Exhaust hardware 543 Fuel & Exhaust L

25 Exhaust Components Before After Keep Cast Iron Manifolds Looking New! Apply this non-toxic manifold dressing to your manifolds with a cloth and polish them to a silvery shine. One 3 ounce container will do approximately 3 sets of manifolds. Burn proof up to 1800 degrees fahrenheit. For those before-show touch-ups, try our quikstik manifold dressing touch-up stick. CY ounce can ea Lower Heat Stove This lower heat stove was originally installed on models. For V8 small block engines small block ea Air Heat Stove Mounting Stud This is the factory stud used to mount the air heat stove to the exhaust manifold. Fits , , 350 and all models. G ea Exhaust Manifold Heat Riser Valve Heat riser valves are located between the exhaust manifold and the head pipe and are used to hasten the warm up of a cold engine. A malfunctioning or frozen valve can cause loss of power or exhaust manifold damage. Fits Chevrolet small block models with 2" headpipe. Note: Images are shown from the bottom (pipe) side small block ea Fuel & Exhaust L R Reproduction Smog Tubes We offer reproduction smog tubes also known as air injection reactor tubes which are manufactured exactly as original! These tubes are cosmetically correct in every detail! Each tube is manufactured to exact factory specifications including correct bends and outlets for installation onto the exhaust manifold. A correct threaded outlet head is installed for easy installation of the smog pump check valves. Original GM tubes are finished in the correct zinc plating. R engine (repro) pr R engine (repro) pr R engine (repro) pr R engine (repro) pr R engine (repro) pr R engine (repro) pr G V8 SB, MT, LH (GM) ea Upper Heat Stove Reproduction exhaust manifold upper heat stove which is used with the air heat tube to preheat the air cleaner thermo-sensor. This item mounts on the RH (passenger side) exhaust manifold. The air tube is inserted into this item. This upper heat stove fits small block V8 models small block ea Steel Exhaust Manifold Tube Chevrolet passenger car stainless steel exhaust manifold tube that is inside of the exhaust manifold. TF V ea Air Injection Tube Eliminator Plug Correct block-off plug used when converting currently produced exhaust manifolds with holes for air injection tubes back to pre-smog usage. EMP330 all ea GM Exhaust Manifold Heat Risers Heat riser valves are located between the exhaust manifold and the head pipe and are used to hasten the warm up of a cold engine. A malfunctioning or frozen valve can cause loss of power or exhaust manifold damage. Note: Images are shown from the bottom (pipe) side. G , 409, ea G , ea EMR Exhaust Components Toll Free Order Line G5131 EMR003 Repro Exhaust Manifold Heat Risers Stock replacement heat riser valves are available for V8 engines as well as blank plates for improved flow. Note: Images are shown from the bottom (pipe) side. EMR001 w/2" headpipe w/valve ea EMR002 w/2-1/2" headpipe w/valve ea EMR003 w/2" headpipe - w/o valve ea EMR004 w/2-1/2" headpipe - w/o valve ea Exhaust Heat Riser Gasket This Chevrolet passenger car exhaust manifold heat riser gasket for V8 models with 2 1/2" exhaust mounts between exhaust manifold and the heat riser. Fits heat riser part numbers EMR002 and EMR004. TF ea Oxygen Sensor Plug Many headers for late model engines are equipped with a oxygen sensor bung in each header. When retrofitting a carburetor on late model engines, an oxygen sensor is not necessary. This plug seals the oxygen sensor bung on headers and exhaust manifolds. Made from trivalent chromium plated steel with a M-18 thread size to fit most stainless headers M-18 thread oxygen sensor plug ea Headpipe Tube Extension These is the short extension pipe which slips in between the exhaust manifold and the main header pipe and supports the exhaust pipe packing gasket. This item is manufactured in original material. Small Block " o.d ea Big Block /4" o.d ea

26 Emissions System 11132A Replacement Smog Pumps These re-manufactured smog pumps will replace the original exactly. Choose from 6 cylinder or 8 cylinder pumps. Classic Industries offers the largest selection of smog parts anywhere! Pulley not included. 6 Cylinder 11132A 1966 with power steering ea 11133A 1966 w/o power steering ea 11132A ea ea ea V , 3.8L ea , 3.8L ea , 3.8L ea , 3.8L ea V , 305 ci, 350 ci ea ea 11132A ea ea w/o Police/Taxi ea w/police/taxi ea ea ea ea w/o AC ea with AC ea w/o AC ea with AC ea ea ea , 396, ea , 400, ea ea w/fd stamp ea w/fc stamp ea w/o ML stmp ea w/ml stamp ea ea ea 11132A , ea , ea ea Smog Pump Belts Correct reproduction A.I.R. smog pump belts for Impala models. These unique reproduction belts are designed to offer an original factory style that includes the correct belt markings for an authentic and original reproduction. Each belt is officially licensed by General Motors. B946B , 327 w/o AC ea B , 327 with AC ea B , 427 w/o AC ea B , 427 with AC ea B , 327 w/o AC ea B , 327 with AC ea B with TH ea B , 427 w/o AC ea B , 427 with AC ea B (L72) ea B , 327 w/o AC ea B , 327 with AC ea B , 427 w/o AC ea B , 427 with AC ea B (L72) ea Lower Smog Pump Bracket Reproduction lower smog pump bracket for Impala and full size Chevrolet models equipped with a small block V8. SP small block ea Smog Pump Bracket Original GM smog pump bracket for full size models. Used to support the smog pump. G , ea G ea Smog Pump Hose Tower Clamps Reproduction tower design smog pump hose clamp for vehicles. Featuring the correct 1-1/6" diameter size. As required ea E2041 G Smog Check Valve Smog pump check valve for Chevrolet full size models. E reproduction ea G all - GM ea G , GM ea G all - GM ea G bbl, GM ea G GM ea G , GM ea G GM ea G all - GM ea Air Injection Diverter Valve Tee Original air injection valve tee for models. G all ea Air Injection Extension Tubes Reproduction A.I.R. extension tubes which fit in the exhaust manifold port under the main A.I.R. tube assembly. E small block ea SH Air Injection Hose Sets Includes hoses to check valve on AIR tube. Correct lengths of thick walled hoses to replace missing or cracked originals. Includes 4 correct tower hose clamps for mounting. SH small block set K big block set K big block set 1967 Big Block Air Injection Pump Hose Reproduction air injection reactor hoses for 1967 big block engines ea 1967 Big Block Air Injection Pump Hose Reproduction air injection reactor hoses for 1967 big block Impala models ea Smog Diverter Elbow Reproduction diverter elbow for the smog pump. This is the OEM aluminum elbow that bolts to the smog pump, and the diverter valve mounts on the opposite side. For Chevrolet applications LS6, LS5, L78, L89, 302, 350, 396 and 454 engines ea Smog Pump Pulley Quality reproduction of the deep groove A.I.R. (air injection reactor) pump pulley for high performance small block and big block models. Single groove, 5-3/4" o.d. K w/hi perf eng ea Warning: Concerning Smog Pump Pulleys Stock replacement, aftermarket stamped steel or cast iron pulleys are not designed to exceed 400 horsepower or 6000 RPM. Using reproduction pulleys on engines in excess of these limits may result in catastrophic disintegration of the pulley causing severe damage to the engine, cooling system and body parts. Classic Industries assumes no liability for damages caused by improper usage of pulleys. Please be sure to install the pulley properly to avoid damages that could occur from improper installation or exceeding the recommended RPM limitations. Emissons System 545 Fuel & Exhaust L

27 Original Style Exhaust Systems SC73007S Original Style Exhaust Systems - Stainless Steel OE-style replacement exhaust systems for all full size Chevrolet models. Manufactured in 304 grade stainless steel, each replacement exhaust system is designed to closely duplicate and replace the original system. All systems feature as-original notched-tip tailpipes and all exhaust systems are mandrel bent for improved performance and exhaust flow. Each system includes header pipes and two header pipe flange gaskets as required. Note: Special shipping charges apply. SC73041S cyl single exh set SC73042S cyl 283 single exh set SC73007S cyl 283 dual exh set SC73010S cyl 348 dual exh exc high perf set SC73004S cyl single exh set SC73021S cyl stat wag, El Cam, single exh set SC73001S cyl 283 single exh set SC73022S cyl 283 stat wag, El Cam, single exh set SC73002S cyl 283 dual exh set SC73024S cyl 283 stat wag, El Cam, dual exh set SC73011S cyl 348 dual exh exc high perf set SC73023S cyl 348 stat wag, El Cam, dual exh exc hp set SC73013S cyl 348 dual exh w/high perf set SC73025S cyl 348 stat wag, El Cam, dual exh w/hp set SC73005S cyl 348 dual exh set SC73034S cyl 348 stat wag, El Camino, dual exh set SC73008S cyl single exh set SC73038S cyl stat wag, El Cam, single exh set SC73000S /409 dual 2 1/2" exh set SC73035S stat wag, El Cam, low hp 348/409 dual exh set SC73006S cyl 283 single exh set SC73039S SW, El Camino, 283, single exh set SC73003S & 327 dual exh exc high perf set SC73033S /327 stat wag, El Cam, dual exh exc hp set SC73014S dual exh w/high perf set SC73036S stat wag dual exh w/high perf set SC73009S cyl single exh set SC73040S cyl stat wag single exh set SC73015S bbl w/cast iron headers set SC73037S bbl stat wag w/cast iron headers set SC73027S cyl 283 & 327 dual exh set SC73028S cyl 396 & 427 dual exh set SPECIAL SHIPPING! SC Original Style Exhaust Systems - Aluminized Original style aluminized exhaust systems for full size Chevrolet models. These original style exhaust systems are manufactured in heavy 16 gauge aluminized steel (mufflers aluminized inside and out). All systems feature as-original notchedtip tailpipes and all exhaust systems are mandrel bent for improved performance and exhaust flow. Each system includes the exhaust header pipes and two header pipe flange gaskets as required. Note: Special shipping charges apply. SC cyl single exh set SC cyl 283 single exh set SC cyl 283 dual exh set SC cyl 348 dual exh exc high-perf set SC cyl single exh set SC cyl stat wag, El Cam, single exh set SC cyl 283 single exh set SC cyl 283 stat wag, El Cam, single exh set SC cyl 283 dual exh set SC cyl 283 stat wag, El Cam, dual exh set SC cyl 348 dual exh exc high perf set SC cyl 348 stat wag, El Cam, dual exc hp set SC cyl 348 dual exh w/high perf set SC cyl 348 stat wag, El Cam, dual exh w/hp set SC cyl 348 dual exh set SC cyl 348 stat wag, El Cam, dual exh set SC cyl single exh set SC cyl stat wag, El Cam, single exh set SC /409 dual 2 1/2" exh set SC stat wag, El Cam, low hp 348/409 dual exh set SC cyl 283 single exh set SC stat wag, El Cam, 283, single exh set SC & 327 dual exh exc high perf set SC /327 stat wag, El Cam dual exh exc hp set SC dual exh w/high perf set SC stat wag dual exh w/high perf set SC cyl single exh set SC cyl stat wag single exh set SC bbl w/cast iron headers set SC bbl stat wag w/cast iron headers set SC cyl 283 & 327 dual exh set SC cyl 396 & 427 dual exh set SPECIAL SHIPPING! Fuel & Exhaust L Impala Magnafl ow Exhaust Magnaflow crossmember-back performance exhaust system. Made from 2.5" mandrel-bent stainless steel with a 3" o.d. tip size, dual rear exit. Has a smooth, deep tone, easy to install, built to last. Fits 235, 283, 348, 350, 409 and 427 CID. A ea Header Collector Ball Flange Set This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. F " collector to 3" system set F " collector to 2.5" system set 546 Exhaust Systems Toll Free Order Line F15923

28 Aftermarket Exhaust Systems P Header Back System With X-Pipe Fabricated using 16 gauge, mandrel-bent stainless steel pipe ensures maximum exhaust gas flow which will boost horsepower. This system features a Siamese designed X-pipe, a pair of Street Pros mufflers for or Race Pros mufflers for , tailpipes, cad plated clamps and hangers. The combination of the crossover and the mufflers deliver a perfect balance of sound and performance. 2-1/2" header back system with X-pipe. Important: * If using stock, cast iron manifolds, add a set of downpipes to connect your original manifolds to the header back system. Note: Shipped double oversize. OS2 P1007 * Street Pros mufflers set P Race Pros mufflers set EX Stock Replacement Aluminized Dual Exhaust All standard stock dual exhaust replacement systems are 14 gauge aluminized pipe bent to original manufacturer s specifications. All systems come with head pipes, tail pipes, resonators (where applicable), stock mufflers, flanges and clamps. The small block systems have 2-1/4" head pipes, 2" tail pipes and are rear exit systems. The big block systems have 2-1/2" head pipes, 2" tail pipes and rear exit systems. Note: Mandatory shipping charges apply. Shipped truck freight. Small Block EX w/o resonators set EX w/o resonators set EX w/resonators set EX w/o resonators set EX w/resonators set EX w/o resonators set Big Block EX w/o resonators set EX w/resonators set EX w/o resonators set EX w/resonators set EX w/o resonators set Header Back System With X-Change Pypes has designed a 2-1/2" Header Back dual exhaust systems for V8 models. Fabricated using 16 gauge, mandrel-bent aluminized steel pipe ensures maximum exhaust gas flow which will boost horsepower. X-change crossover is unique with its open port exhaust that provides a straight path when uncapped yet still utilizes the benefits of the crossover technology for an extra mph. Features a Siamese designed X-pipe with the X-change crossover, a pair of Street Pros mufflers, tailpipes, cad plated clamps and hangers. The combination of the crossover and the mufflers deliver a perfect balance of sound and performance. 2-1/2" header back system with X-change. Important: If using stock, cast iron manifolds, add a set of downpipes to connect your original manifolds to the header back system. OS2 Note: Shipped double oversize. P set BA Borla T-304 Stainless Exhaust System These smooth bore 2-1/2" mandrel bent true dual exhaust systems from Borla fit 1962 Impala and full size models with manual or automatic transmission with small block 283, 327, or LS1 engines and increases horsepower 7-10% in most vehicles. These systems include two turbo style mufflers, head pipes for stock exhaust manifolds, and two styles of tailpipes to give you the choice of split rear or side exit through polished 2" stainless steel turned down exhaust tips. All Borla systems are made from the aircraft grade T-304 stainless steel and are backed by a 1,000,000 mile warranty. Important: Does not fi t wagon models. OS2 Note: Shipped double oversize. No further discounts apply. BA SB 2-1/2" dual exhaust system set BA LS1 2-1/2" dual exhaust system set F15937 U-Fit Dual Pipe Set These new kits come complete with all the pipes you need to build a custom dual exhaust system in 2-1/4", 2-1/2" or 3" pipe diameters. These U-Fit kits include the front adapter pipes, intermediate pipes, H-pipe assembly and over-the-axle pipes. Each piece has a slip-fit connection, for easy assembly and built from mandrel bent, 16-gauge aluminized steel tubing. Important: Hardware not included. OS1 Note: Shipped oversize. F /4" set F /2" set F " set LT1 Borla Dual Exhaust Give your Impala SS a deep throaty sound to match its aggressive looks with these Borla high flow systems. Featuring 2.5" smooth mandrel-bent tubing, a low-restriction single-flow muffler, and unique intercooled tips, these systems reduce backpressure to improve performance and give the rear section of your Impala a highly finished look. All Borla systems are made from the aircraft grade T-304 stainless steel and are backed by a 1,000,000 mile warranty. Note: Shipped double oversize. No further discounts apply. OS2 BA LT1 cat back exhaust system set Exhaust Systems 547 Fuel & Exhaust L

29 Exhaust Parts MN2446 MN2450 Electric Exhaust Cut-Outs Don t crawl under your car to uncork your exhaust ever again by switching to electric cut-outs. Keep them closed and quiet for the street, wide open for the strip, or anywhere in between with the flip of a switch. You control the volume and the power! Available in sizes 2-1/4" to 4" and a low profile oval design for applications with limited ground clearance. Fits 2-1/4" to 3" round exhaust pipe. Built with high quality materials- CNC 6061 aluminum body and motor plate, stainless steel shaft and butterfly plate, high torque DC gear driven motor, weather-tight wiring connectors, and custom illuminated toggle switch. Note: Match valve size with cut-out size for optimal fi t and performance. Electric Cut- Out Valves - Individual Part# Cut-out Size Additional Notes Price MN /4" valve ea MN /2" valve ea MN2445 3" valve ea MN2446 oval valve includes connector, fits 2-1/2" to 3" round pipe ea MN /2" valve ea MN2448 4" valve ea MN2449 4" valve includes 4" three-bolt flange ea Electric Cut-Out Valve Sets MN2450 two 2-1/4" valves pr MN2451 two 2-1/2" valves pr two 3" valves pr MN2452 MN2453 two oval valves includes connector, fits 2-1/2" to 3" round pipe pr MN2454 two 3-1/2" valves pr two 4" valves pr MN2455 MN2456 two 4" valves includes 4" three-bolt flange pr Doug's Stainless Steel Cutout Turn Downs Easily route your cutout exhaust flow away from the floor boards or in any direction with these easilyinstalled 304 stainless steel turn downs. These turndowns are made specifically for Doug's electric cutouts and included stainless band clamps for weld free attachment. Made in the USA /2" turndown pipe ea " turndown pipe ea Fuel & Exhaust L MN2457 MN2459 Universal Exhaust Turn-Downs Universal exhaust turn-downs for electric cutouts. They feature a 360º floating flange which allows turning in any direction. Manufactured from stainless steel with a polished finish. MN /2" turn-down ea MN2458 3" turn down ea MN2459 oval turn down ea MN2460 Stainless Steel Cut- Out Pipes Stainless steel exhaust cut-out pipes for all models. Manufactured from 304 stainless steel with a polished finish. They feature a TIG-welded construction with a 3/8" flange for a proper seal. Includes the end cap, gasket and hardware for an easy installation. MN /4" cutout ea MN /2" cutout ea MN2462 3" cutout ea MN /2" cutout ea MN2464 4" cutout ea Pypes Electric Cutouts The optional electric exhaust cutouts and make uncorking your exhaust as easy as flipping a switch. Electric cutout set includes 2 valves, wire harness, switch, mounting hardware and 2 gaskets. Limited lifetime warranty. Electric exhaust cutouts fit 2-1/2" or 3" dump legs. P1074 3" electric exhaust cutout set set Electric Cutout Remote Control System Remote control for your electric cutout system. When space is a premium this control box gives you the flexibility you need. Includes 2 wireless key fobs for 100% control over your cutouts at the push of a button. MN set Doug's Stainless Steel Electric Cutouts These cut-outs feature a rugged 12 volt DC motor and rotating gate for a leakproof seal every time the cut-out is opened and closed. When fully opened, these cut-outs do not create exhaust flow obstructions that can create a leaky gasket sound, unlike butterfly-style cutouts. A pre-wired harness with an illuminated rocker switch is supplied for easy installation. Uncork your exhaust with the flip of a switch from your dash. The cut-outs are ideal for race tracks that don t require mufflers. These Doug s cut-outs are available individually, in pairs, or in complete kits with Y-Pipes for easy installation. Made in USA. Note: May not be legal for highway use or use on emission controlled vehicles. Important: Not recommended for vehicles equipped with catalytic converters. Key Features: 304 stainless steel construction High torque 12 Volt DC gear reduction motors Self adjusting, self cleaning gate for leak proof seal Zero obstructions when fully open Harness pre-wired for easy installation Reduced size permits greater installation options Includes wiring harness, gaskets and hardware Cutout kits included Y-pipe & band clamps for simple installation /2" single electric cutout ea /2" pair electric cutouts pr /2" complete kit set " single electric cutout ea " pair electric cutouts pr " complete kit set 548 Exhaust Parts Toll Free Order Line

30 Exhaust Parts Dual Drive Oxygen Sensor Wrench Tool comes with both 1/2" and 3/8" drive. Attach a 1/2" breaker bar on the end of the tool to initially loosen stuck sensors. Use a 3/8" ratchet on the top for fast removal and installation. Fits oxygen sensor applications with a heat shield. Slotted body allows clearance for wire harness. Forged, heat-treated steel with six point design will withstand high torque removal applications ea Low-Line Lake Pipes... The Look is Back! Get the retro look with a set of chrome lake pipes on your full size Chevrolet passenger car. This look was popular in the late 1950 s and early 1960 s. When set up as a functional feature, it allowed the racer to uncap or dump the exhaust for increased exhaust flow when racing. The use of a cap was allowed for quieter operation during street driving. It also provided the car with a lower lead sled look. These pipes do not incorporate any silencing materials and are recommended for nonfunctional use only. Choose from three styles - slanted outlet without cap, triple outlet with caps or single outlet with cap. Available in three lengths to suit your needs. Chrome pipe measures 2" in diameter. Mounting clamps sold separately. Note: Shipped oversize. Slant Outlet OS1 H1260 2" x 60" pr H1270 2" x 70" pr H1280 2" x 80" pr Single Outlet with Caps H1263 2" x 60" pr H1273 2" x 70" pr H1283 2" x 80" pr Triple Outlet with Caps H1264 2" x 60" pr H1274 2" x 70" pr H1284 2" x pr Chrome Mounting Clamps HPC200 2" ea Exhaust Hangers When it comes to a variety of exhaust hangers, Classic Industries has the best selection! Choose from a large variety of original style brackets. See the listing below for current availability. Note: * Dual exhaust. Single exhaust cyl rear tailpipe ea cyl muffler support 9.99 ea cyl muffler support 9.99 ea cyl rear tailpipe ea rear tailpipe ea 35210* muffler support 9.99 ea mid tailpipe ea 35209* muffler support 5.99 ea 35209* muffler support 5.99 ea muffler support 9.99 ea muffler support 9.99 ea mid tailpipe ea muffler support 9.99 ea muffler support 9.99 ea muffler support 9.99 ea muffler support 9.99 ea * muffler support 9.99 ea muffler support 9.99 ea muffler support 9.99 ea mid tailpipe ea * muffler support 9.99 ea muffler support 9.99 ea muffler support 9.99 ea muffler support 9.99 ea tailpipe wagon 8.99 ea Exhaust Insulator Correct replacement exhaust muffler insulator for use on the applications listed below. Available for models, replaces worn hanger strap insulator cyl ea ea , ea ea ea ea ea H3010 The Sound of the Fabulous Fifties! The world s oldest performance muffler, a Smithy s glasspack is now available for your full size Chevrolet passenger car! Get the muffler your dad used to impress his friends, and yes, it s still guaranteed not to blow out or leak. Double endcap construction and 3-1/2" hammertone finished cases assure the original Smithy look. A great tone for your fifties or sixties sled. H3010 2" inlet, 2" outlet, 22" long ea H3011 2" inlet, 2" outlet, 26" long ea H3012 2" inlet, 2" outlet, 30" long ea Terminator Muffl er Flowtech s Terminator is constructed entirely of superthick, black aluminized steel, fully welded for strength and durability with 3" inner pass tubes that reduce back pressure and increase horsepower like no other muffler can. Available for universal fit applications. Dimensions: 15" x 11" x 5". Universal Fit Inlet / Outlet /4" center/offset ea /2" center/offset ea " center/offset ea Muffl er Support Brackets Correct replacement muffler support brackets designed to replace the original missing or broken brackets ea ea ea ea 27" Full Size Chevrolet Muffl er Replacement muffler designed for all full size Chevrolet models. Each muffler will replace the original muffler exactly. For use with original style exhaust system " in x 1-7/8" out ea 8" Universal Fit Raptor Muffl er Flowtech s Raptor turbo performance muffler features a unique sound rib case design and aluminized, lock seal construction. The Raptor has low restriction, reduces back pressure and increases performance. It offers gigantic, high-output flow tubes to provide more horsepower, better mileage, and a sound of pure performance. Dimensions 13" x 10" x 4-1/2" with offset-inlet / center-outlet " ea /4" ea /2" ea Exhaust Parts 549 Fuel & Exhaust L

31 INC. Performance Mufflers FLOWMASTER 40 Series Performance Muffl ers Flowmaster s technology uses the pressure and sound energy released from an engine s combustion chamber into the exhaust system to create a low pressure area between exhaust pulses. Their design uses this energy to pull spent gases out of each cylinder more efficiently. This improved removal of exhaust gases out of the cylinders promotes a more efficient charge of unburned fuel and air to fill the cylinder for the next cycle. The result is more power as the engine has a purer mixture to burn. Aluminized Steel Original Flowmaster Tone Deep Tone Inside Vehicle Street or Strip F Flowmaster Super 10 Series Stainless Steel Muffl ers Looking for the most aggressive sound available? Flowmaster's new Super 10 series mufflers are so aggressive, they aren't recommended for street driven vehicles. Best suited to racing applications, these feature the same Delta Flow performance technology used in the highly popular Super 40 and Super 44 series Flowmaster mufflers. Manufactured from durable 409S stainless steel for long life and offered in a variety of configurations. Backed by a limited lifetime manufacturer's warranty, these short, single chamber mufflers deliver the closest thing to open pipe sound possible. If you want high impact sound, the Super 10 series mufflers are the answer. Measures 6.5" x 9.5" x 4". Note: These muffl ers are recommended for off-highway use, not for street driven vehicles F " center inlet/center outlet ea F "/2.25" center inlet/dual outlet ea F " offset inlet/offset outlet ea F " center inlet/center outlet ea F "/2.5" center inlet/dual outlet ea F42441 Flowmaster 40 Series-Original Flowmaster Tone This is the most aggressive sounding street/strip muffler that Flowmaster offers. If you re looking for attention, this one will get you noticed. The standard 40 series has an aggressive rumble and will generally resonate inside the vehicle around rpm s, and again at rpm s. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability F " offset inlet/center outlet ea F " offset inlet/center outlet ea F " offset inlet/offset outlet ea F " offset inlet/offset outlet ea F "/2.5" center inlet/dual outlet ea FLOWMASTER Delta Flow 40 Performance Muffl ers Fuel & Exhaust L F FLOWMASTER Super 40 American Thunder The Super 40 5" X 10" case design gives you a deeper tone that retains our classic 40 Series sound and feel. Increased flow path radius for optimum internal flow using the latest in Delta Flow technology. Flowmaster state-of-the-art robot assembly technology assures a product that exceeds OEM auto manufacturers specifications. To achieve such critical quality, Flowmaster performs extensive R&D at the track and in-house with our own engine and chassis dyno facilities. Flowmaster Super 40 is aluminized, black in color and is the most aggressive, deepest-sounding street two chamber muffler they ve ever built. Enjoy some American Thunder today! F /4" center in/center outlet ea F /4" offset in/center outlet ea F /4" center in/offset outlet ea F /4" offset in/opposite offset outlet ea F /2" center in/center outlet ea F /2" offset in/center outlet ea F /2" center in/offset outlet ea F /2" offset in/opposite offset outlet ea F /2" offset in/same offset outlet ea F " center in/center outlet ea F " offset in/center outlet ea F " center in/offset outlet ea F " offset inlet/opposite offset outlet ea T409 Stainless Steel Powerful Aggressive Tone Lower Interior Resonance Street or Strip Flowmaster Delta Flow 40 Series-Reduced Interior Resonance This two chamber design incorporates Flowmasters patented Delta Flow technology. The Delta deflectors result in increased scavenging for better performance and reduced interior resonance over the standard 40 series with a nice growl outside the vehicle. Sounds great on late model performance cars with catalytic converters. Constructed of 16 gauge steel and fully mig-welded for maximum durability. F " center inlet/center outlet ea F " offset inlet/center outlet ea F " offset inlet/center outlet ea F " center inlet/offset outlet ea F " offset inlet/offset outlet ea F " offset inlet/offset outlet ea 550 Performance Mufflers Toll Free Order Line

32 Performance Mufflers FLOWMASTER Super 44 Delta Flow Muffl ers FLOWMASTER 50 Series Performance Muffl ers S44 SERIES OEM OEM FLOWMASTER Super 44 Delta Flow The Super 44 is the most aggressive, deepest toned street and strip muffler Flowmaster has ever made! The Super 44 s offer maximum performance, an improved flow path radius, and generates more torque and more power than ever before! If you really want to hear your exhaust system inside as well as outside, the Super 44 is for you! F /4" center inlet/center outlet ea F /4" offset inlet/center outlet ea F /4" center inlet/offset outlet ea F /4" offset inlet/opposite offset outlet ea F /4" offset inlet/same offset outlet ea F /2" center inlet/center outlet ea F /2" offset inlet/center outlet ea F /2" center inlet/offset outlet ea F /2" offset inlet/opposite offset outlet ea F /2" offset inlet/same offset outlet ea F " center inlet/center outlet ea F " offset inlet/center outlet ea F " center inlet/offset outlet ea F " offset inlet/opposite offset outlet ea F " offset inlet/same offset outlet ea F " center inlet/dual outlet ea Flowmaster 50 Series SUV-Performance Muffl ers T409 Stainless Steel Milder Performance Sound Lower Interior Resonance Performance Street F Flowmaster Delta Flow 50 Series-Milder Interior & Exterior Tone This is the latest design of the 50 series muffler that utilizes Flowmasters patented Delta Flow technology along with an H-Chamber to eliminate most all interior resonance and still have that famous Flowmaster sound outside the vehicle. Constructed of 16 gauge steel and fully mig-welded for maximum durability. F " center inlet/center outlet ea F " offset inlet/center outlet ea F " offset inlet/center outlet ea F " offset inlet/center outlet ea F " center inlet/offset outlet ea F " offset inlet/offset outlet ea F " offset inlet/offset outlet ea FLOWMASTER 80 Series Performance Muffl ers Large Displacement Street Cars Early Era Muscle Cars Deep Tone Outside Of Vehicle Flowmaster 50 Series SUV-Performance The SUV/Performance muffler is a larger version of Flowmasters 50 Series Delta Flow muffler and is specially designed for trucks, light SUVs and high horsepower vehicles. The larger H-chamber reduces interior resonance to a minimum. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability. F " center inlet/center outlet ea F " offset inlet/center outlet ea F " center inlet/offset outlet ea F " offset inlet/offset outlet ea F " center inlet/center outlet ea F " offset inlet/center outlet ea F " center inlet/offset outlet ea F " offset inlet/offset outlet ea F52556 Aluminized Steel Aggressive Performance Sound Higher Interior Resonance Transverse Mounting Flowmaster Cross Flow 80 Series-Transverse Mounting The 80 Series is designed for applications where the muffler must be mounted transversely (cross-flow) behind the rearend. It provides an aggressive muscle car sound both inside and outside the vehicle. A replacement for early and late model vehicles. Constructed of 16 gauge aluminized steel and fully mig-welded for maximum durability. F " dual inlet/dual outlet 4" x 9.75" x 24" ea F " single inlet/dual outlet 4" x 9.73" x 21" ea F "/2.5" single inlet/dual outlet 4" x 9.73" x 21" ea F "/2.5" single inlet/dual outlet 5" x 10" x 23" ea Performance Mufflers F Fuel & Exhaust L

33 Performance Exhaust F F Flowmaster s Super HP-2 Muffl ers Designed for street rods, customs and vehicles where undercarriage space is tight, the Flowmaster Super HP-2 provides the exhaust performance you need in a compact package that fits wherever you need it. The Super HP-2 has a moderate tone with the appearance, durability, and sound control to suit daily drivers, weekend cruisers, and world-class show vehicles. Available with a 409S stainless steel case or polishable 304S stainless steel case in sizes from 2", 2-1/4" and 2-1/2". Made in USA 409S Stainless Steel Case F " in/out 4"H x 5"W x 12"L body ea F " in/out 4"H x 5"W x 18"L body ea F /4" in/out 4"H x 5"W x 12"L body ea F /4" in/out 4"H x 5"W x 18"L body ea F /2" in/out 4"H x 5"W x 12"L body ea F /2" in/out 4"H x 5"W x 18"L body ea 304S Polishable Stainless Steel Case F /4" in/out 4"H x 5"W x 12"L body ea F /4" in/out 4"H x 5"W x 18"L body ea F /2" in/out 4"H x 5"W x 12"L body ea F /2" in/out 4"H x 5"W x 18"L body ea F17413 F Header Back Pipe Set Flowmaster performance 2-1/2" header back pipe sets for Impala and full size Chevrolet models. This pre-bent pipe kit is made with 16 gauge 409 stainless steel mandrel bent tubing and are designed to fit your vehicle perfectly with all the quality and performance that you would expect from a Flowmaster product. Mufflers sold separately. OS2 Note: Shipped double oversize. F tailpipe set set F midpipe set set Flowmaster Stainless Rolled Edge Tip Stainless exhaust tip that is designed with a rolled edge. This is a clamp-on style, finished with an embossed Flowmaster logo. Sold individually. F " dia. for 2.5" pipe - 12" long ea Flowmaster Stainless Steel Exhaust Tip This style is a highly-polished round tip with a rolled edge. Clamp-on style, finished with an embossed Flowmaster logo. Sold individually. F " dia. for 3" pipe - 12"L ea Universal Balance Pipe Set Flowmaster offers a prefabricated universal balance pipe set to ease the installation of a crossover pipe in a dual-exhaust system. Set includes T-pipe connectors, balance pipe and clamps. F " set Fuel & Exhaust L Flowmaster Stainless Angle Cut Tip Exhaust tip with straight-edge, angle-cut end. This weld-on tip is finished with an embossed Flowmaster logo. Sold individually. F " dia. for 2.5" pipe - 13" long ea F15364 Stainless Rolled Edge Exhaust Tip This is a stainless exhaust tip designed with a double wall, rolled edge offering 3.5" and 4" diameter exits. Designed to fit 2.25" or 2.5" pipe, they are 7.5" in length. Clamp-on style finished with an embossed Flowmaster logo. Sold individually. F " tip fits 2.25" pipe ea F " tip fits 2.5" pipe ea Flowmaster Heat Shields Formed aluminum heat shield designed to mount on muffler for added protection in reducing heat radiated from mufflers and reducing interior noise. Attaches easily with included straps. Fits 5" x 10" x 17" mufflers. F ea 552 Performance Exhaust Toll Free Order Line

34 Performance Mufflers Dynomax Universal Fit Super Turbo Muffl er The Dynomax Super Turbo muffler has exclusive patented flow directors to channel exhaust flow and eliminate turbulence, larger diameter internal tubes for maximum flow, along with fiberglass matting that delivers a mellow, true performance sound. All universal mufflers are reversible for custom installation. Important: Muffler comes in two styles, Sport model from 2" to 2-1/2" measures 4" x 9-3/4" x 18-1/2" and 3" measures 4" x 9-3/4" x 20"; Street model measures 4" x 9-3/4" x 25-1/2". Sport Inlet/Outlet " offset/center ea " offset/offset ea /4" offset/center ea /4" offset/offset ea /2" offset/center ea /2" offset/offset ea /4" offset/center ea " offset/center ea " offset/offset ea Street /4" center/offset ea /4" offset/center ea /2" center/offset ea /2" offset/offset ea /2" center/offset dual ea Magnafl ow 4" x 9" Oval Muffl ers Magnaflow s wide-open performance mufflers outflow OEM chamber style mufflers by as much as 167%! This reduces engine heat and back pressure and improves exhaust scavenging from the combustion chamber. Magnaflow minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine. Magnaflow is the straight through, wide-open performance muffler with a smooth, deep tone. These mufflers offer a reversible inlet/outlet design. Stainless Steel Muffler 4" x 9" " 2" inlet/outlet ea " 2.25" inlet/outlet ea " 2.5" inlet/outlet ea " 3" inlet/outlet ea Polished Stainless Steel Muffler 4" x 9" " 2" inlet/outlet ea " 2.25" inlet/outlet ea " 2.5" inlet/outlet ea " 3" inlet/outlet ea THRUSH Glasspack Muffl ers Thrush has long been the industry leader in glasspack mufflers. They have a straightthrough, smooth-flowing, perforated center tube design for maximum flow and power. Thrush mufflers come with expandable bushings for custom applications. Enjoy the unmistakable sound of a Thrush glasspack muffler today. Dimensions: overall length x shell length x shell diameter: " 25" x 20" x 3-1/2" ea " 27" x 22" x 3-1/2" ea " 31" x 26" x 3-1/2" ea /4" 25" x 20" x 3-1/2" ea /4" 27" x 22" x 3-1/2" ea /4" 31" x 26" x 3-1/2" ea /2" 28" x 23" x 4" ea /2" 45" x 40" x 4" ea Tru-X & Y Pipes The more gentle radius of these x and y pipes allow for better exhaust gas scavenging, noise cancellation and better balance between cylinder banks. The result is a significant increase in power and torque, but a reduction in db sound levels. X-Pipe /2" dual in/out x 9.5" long ea " dual in/out x 13.2" long ea Crossover /4" dual in/out x 12" long ea /2" dual in/out x 12" long ea " dual x in/out x 14" long ea Y-Pipe /2" single side, 2" dual side ea /2" single side, 2-1/4 dual side ea /2" single side, 2-1/2 dual side ea " single side, 2-1/2 dual side ea " pipe, 3" dual side ea Magnafl ow 5" x 8" Oval Muffl ers Magnaflow s wide-open performance mufflers outflow OEM chamber style mufflers by as much as 167%, reducing engine heat and back pressure that improves exhaust scavenging from the combustion chamber. The greater efficiency minimizes the power robbing effects of the OEM system to maximize torque and horsepower from the engine. Magnaflow is the straight through, wide-open performance muffler with a smooth, deep tone. Designed for applications where the muffler must be mounted transversely behind the rear axle. Stainless Steel Muffler 5" x 8" " 2.5" inlet, 2.25" dual outlet ea " 2.5" inlet, 2.5" dual outlet ea " 3" inlet, 2.5" dual outlet ea Polished Stainless Steel Muffler 5" x 8" Note:* Fits V6, gives a dual exhaust look " 2.5" inlet, 2.25" dual outlet ea * 18" 2.5" inlet, 2.5" dual outlet ea " 3" inlet, 2.5" dual outlet ea Performance Mufflers 553 Fuel & Exhaust L

35 Performance Exhaust Pypes Performance Stainless Steel Muffl ers Through extensive research and feedback from customers, Pypes has learned that no one muffler design is best. Every car is different, and everyone has different requirements. Different performance modifications change the sound and functionality of a muffler, so it s nice to have several different proven designs to choose from! One thing that is consistent with all Pypes mufflers is that they are high quality, precision engineered and constructed which allow us to include a lifetime warranty! Street Pro Muffl ers Don t let the looks of this muffler fool you. At idle, you may cause passengers to grab for their seat belts, but upon acceleration, the smooth, authoritative tone turns apprehension into reassured confidence. This is a great street/strip muffler that will maintain its rich sound qualities for the life of the muffler because there is no filler to burn off. Recommended for stock to medium modified vehicles where an aggressive sound is appreciated without demanding undesirable attention. Muffler shell measures 4" x 9" x 14" long. Limited lifetime warranty. 409 Stainless Steel P " inlet/outlet offset/offset ea P " inlet/outlet offset/center ea P1023 3" inlet/outlet offset/offset ea P1024 3" inlet/outlet offset/center ea Violator Muffl ers The Pypes Violator muffler has quickly gained acceptance and praise in the marketplace. It flows as much air as the Race-Pro muffler but has an incredibly distinctive chambered sound! The Violator s aggressive sound is the result of a unique internal louvered tube with mini sound deflector chambers. Finally, a muffler that flows like a straight through muffler but sounds like a chambered muffler. If you want to be noticed, then this is your muffler! Muffler shell measures 4" x 9" x 14" long. Limited lifetime warranty. 409 Stainless Steel P " inlet/outlet offset/offset ea P " inlet/outlet offset/center ea P1040 3" inlet/outlet offset/offset ea P1048 P1049 P1050 P1051 P1030 Fuel & Exhaust L P1033 Race Pro Muffl ers Sometimes you just have to have the best of everything. When it comes to flow, you just can t get anything better than our Race Pro Muffler. This baby features a straight through path with throughput that can flow 95% as efficiently as a straight pipe! The throaty sound is surprisingly tame considering the absence of any impedance when you look down its barrel. At idle and low RPM cruising, you will not draw much attention, but upon acceleration, bystanders lookout! The Race Pro s aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the unit is sealed. Highly recommended for the track where every tenth counts. Of course, there are plenty of these mufflers hidden under some fine street machines, too! Muffler shell measures 4" x 9" x 14" long. Limited lifetime warranty. 409 Stainless Steel P " inlet/outlet offset/offset ea P " inlet/outlet offset/center ea P1031 3" inlet/outlet offset/offset ea 304 Polished Stainless Steel P " inlet/outlet offset/offset ea P " inlet/outlet offset/center ea P1044 P1045 P1046 Pypes Header Collector Reducers These welded, 12" extended length reducers connect your headers directly to your Pypes X-pipe to eliminate unnecessary seams, clamps and extra work. They are constructed of polished 304 stainless steel. Limited lifetime warranty. P1044 3" header flange to 2.5" pipe reducers pr P1045 3" header flange to 3" pipe reducers pr P " header flange to 3" pipe reducers pr P " header flange to 2.5" pipe reducers pr 554 Performance Exhaust Toll Free Order Line P1052 P1053 Pypes Stainless Exhaust Tips Dress up your exhaust with a classic straight tip, or add extra punch with something a little bolder. Whatever the look you crave, the extensive line of stainless steel Pypes exhaust tips will provide years of eye-popping looks and excellent durability. These tips add the final personal touch to your custom exhaust! P " to dual 3.5" slip-fit stainless splitters pr P " to 6" x 3" oval slip-fit stainless tips pr P " to 8" x 2" rectangle slip-fit stainless tips pr P " x 9" slash cut slip-fit stainless tips pr P " to 3.5" rolled edge slip-fit stainless tips pr P " to 4" x 2" oval slip-fit stainless tips pr

36 Exhaust Tips A 2000P C B 9000B 4000P We ve Got A Hot Tip For You! Top-off your exhaust system with a handsome T-6 Billet aluminum exhaust tip. Three eye-catching designs are available in a variety of sizes to fit your needs. Steel slip-on mount is included to provide for easy clamp-on or weld-on installation. Available in your choice of brushed or polished finish. Exhaust clamps are sold separately. A-Ball Milled Design Polished 2002P 2-1/2" square fits 2" tailpipe ea 2001P 3" square fits 2-1/4" tailpipe ea 2000P 3" square fits 2-1/2" tailpipe ea Brushed Finish 2002B 2-1/2" square fits 2" ea 2001B 3" square fits 2-1/4" ea 2000B 3" square fits 2-1/2" ea B-Powered By Chevrolet (Bow Tie) Design Polished 9001P 3" square fits 2-1/4" tailpipe ea Brushed Finish 9002B 2-1/2" square fits 2" tailpipe ea 9001B 3" square fits 2-1/4" tailpipe ea 9000B 3" square fits 2-1/2" tailpipe ea C-Flamed Design Polished 4002P 2-1/2" square fits 2" tailpipe ea 4001P 3" square fits 2-1/4" tailpipe ea 4000P 3" square fits 2-1/2" tailpipe ea Brushed Finish 4002B 2-1/2" square fits 2" tailpipe ea 4001B 3" square fits 2-1/4" tailpipe ea 4000B 3" square fits 2-1/2" tailpipe ea Exhaus Repair Kit Complete kit for C2505 repairing cracks and splits in mufflers tailpipes and exhaust pipes. Withstands temperatures over 1000 F. The kit contains readyto-use foil packed bandage and support wire. S ea Muffl er and Tailpipe Putty Permanently C2506 Chevrolet Exhaust Defl ectors Add vintage style to your Chevrolet and protect your paint at the same time with these stainless steel exhaust deflectors. Exhaust deflectors clamp on the tailpipe to deflect the exhaust downward, preventing the exhaust from discoloring your chrome or paint. C2505 Bow Tie logo w/ Chevrolet ea C2506 Bow Tie logo only ea Tailpipe Expander Used to remove clamp grooves and round out crushed or bent exhaust pipes to ensure a tight fit, eliminating exhaust leaks. The hex end allows the use of a combination wrench to remove clamp grooves or small imperfections, or an impact wrench to expand pipes. Imperfections are forced outward rather than forward, eliminating possible damage to component parts. No holding fixture is necessary. X /16" to 2-1/2" pipes ea repairs holes and leaks in exhaust systems. Seals out fumes at temperatures up to 2000 F. Safe for catalytic convertors. For use with mufflers, tailpipes and joints. S oz. pouches ea ST778C Bow Tie Exhaust Tips 8" length fits 2-1/4" pipe. Universal to fit nearly any car or truck. Manufactured using 1/8" thick carbon steel, or 1/16" T-304 stainless steel. Choose from 2 popular finishes, triple chrome plated or polished stainless steel. Made in USA. Officially licensed by General Motors. ST778C chrome plated, 8" ea ST778S polished stainless steel, 8" ea ST778S Muffl er and Tailpipe Bandage Epoxy impregnated fiberglass bandage chemically welds mufflers and tailpipes. Permanently repairs holes and leaks in exhaust systems saving costly part replacement. Seals out poisonous fumes to temperatures of 800 F. S sq. in ea Muffl er and Tailpipe Sealer Seals holes and leaks in mufflers, tailpipes and around joints. Makes new installation more secure. Resists temperatures up to 2000 F. Great for use on mufflers, tailpipes, joints and catalytic convertors. S oz. tube ea Exhaust Tips 555 Fuel & Exhaust L

37 Exhaust Accessories A Fuel & Exhaust L A Dr. Gas Universal X-Pipe Crossover Dr. Gas designed and commercialized the x-pipe crossover in the 80s. X-pipes equalize exhaust system pressure imbalances while producing a scavenging effect for more power and efficiency. Exhaust note is dramatically improved to a smoother, higher-pitch note. Universal x-pipe crossover sets are available in 2.5, 3, 3.5, and two special sizes with built-in reducers after the X junction. Sizes with reducers deliver enhanced torque without a horsepower loss. Complete sets include two inlet bends, the x-pipe junction, two outlet bends, and flanges with gaskets and hardware. Precision made with premium materials. Made in USA. Note: Welding and trimming required. Test fi t before fi nal installation. No returns accepted once products are trimmed or altered Complete X-Pipe Crossover Sets A " inlet 2.5" outlet set A " inlet 3" outlet set A " inlet 2.5" outlet set A " inlet 3.5" outlet set A " inlet 3" outlet set X-Pipe Crossover Only 2.5" outlet A " inlet ea A " inlet 3" outlet ea A " inlet 2.5" outlet ea A " inlet 3.5" outlet ea A " inlet 3" outlet ea A Dr. Gas Boom Tubes Dr. Gas Boom Tubes were designed for stock car racing, and now these low-profile side-exit exhausts are available for your muscle car. Boom Tubes have no restriction and are a perfect add-on for exhaust cut-outs. Boom Tubes are fully MIG welded and can be trimmed to match your vehicle s side profile. Untrimmed Boom Tubes measure approximately 27.5 long and are available with 2.5, 3, and 3.5 round inlets. From the inlet transition, they drop to a thin 1.75 thick and 8 wide with two lengthwise support ribs. Exposed exit is approximately 12 to 14 wide depending on the trim angle. Combine with Dr. Gas mufflers and x-pipe system for a one-ofa-kind exhaust sound! Made in USA. Note: Test fi t before trimming. No returns accepted once Boom Tubes are trimmed or altered. Single Boom Tubes A " inlet ea A " inlet ea A " inlet ea Boom Tube Pairs A " inlet pr A " inlet pr A " inlet pr Dr. Gas Boom Tube Muffl ers Dr. Gas Boom Tube Mufflers offer the same fit as a Boom Tube, but have built-in mufflers! Perfect for low ground clearance applications while giving that great sideexit look. Boom Tube mufflers are fully MIG welded and can be trimmed to match your vehicle s side profile. Untrimmed Boom Tube Mufflers are approximately 30" long and are available with 2.5, 3, or 3.5 round inlet tubes for both right and left side exit. Made in USA. Note: Test fi t before trimming. No returns accepted once Boom Tubes are trimmed or altered. Single Boom Tube Mufflers A " inlet RH exit ea A " inlet LH exit ea A " inlet RH exit ea A " inlet LH exit ea A " inlet RH exit ea A " inlet LH exit ea Boom Tube Muffler Pairs RH & LH A " inlet pr A " inlet RH & LH pr A " inlet RH & LH pr A Dr. Gas Boom Tube Tips These Boom Tube Tips are similar to full-size Boom Tube, but are shorter in length for easy installation. They still have the same 8 by 1.75 compact size after the inlet transition. Tips are pre-cut at 45 to expose an 11¼ opening at the side of the car and can be trimmed to match the profile of your car. Tips are fully MIG welded and are available individually or in pairs. Boom Tube tips are approximately 23" long on the long side and 14" long on the short side and are available with 2.5, 3, or 3.5 round inlet pipes. Made in USA. Note: Trimmed or modifi ed tips cannot be returned. Single Boom Tube Tips A " inlet RH exit ea A " inlet LH exit ea A " inlet RH exit ea A " inlet LH exit ea A " inlet RH exit ea A " inlet LH exit ea Boom Tube Tip Pairs RH & LH A " inlet pr A " inlet RH & LH pr A " inlet RH & LH pr Exhaust and Tailpipe Cutter Cuts pipes 3/4" to 3" (19mm to 76mm) in diameter. 15 blades effectively cut pipe so only 1/4" turn is needed for complete cut. Works great in hard to reach areas. X ea 556 Exhaust Accessories Toll Free Order Line

38 Exhaust Accessories A Dr. Gas Frame Clearance Tubes Frame clearance tubes allow you to route your exhaust through tight areas under cross-members and frame rails. They are designed with round openings and a larger-diameter low-profile oval center section that gives extra clearance without a loss of cross-sectional area or flow. Available for 2.5", 3", or 3.5" diameter pipe. Made in USA. A " clearance tube ea A " clearance tube ea A " clearance tube ea A A Dr. Gas FreqMod Heavy Duty Muffl er Dr. Gas FreqMod Heavy Duty mufflers are designed for severe applications such as high horsepower engines running headers, superchargers or large single exhaust systems. The patented two stage design reduces popping and rasp for a mellow tone while maintaining a very high flow rate. Mufflers are available in high temperature black and copper colored finishes. Made in USA. 2.5" Center Inlet/Offset Outlet A black 14" x 10" x 3.5" ea A copper 14" x 10" x 3.5" ea 3" Center Inlet/Offset Outlet A black 14" x 10" x 3.5" ea A copper 14" x 10" x 3.5" ea A black 14" x 10" x 4.5" ea A copper 14" x 10" x 4.5" ea 3.5" Center Inlet/Offset Outlet A black 14" x 10" x 4.5" ea A copper 14" x 10" x 4.5" ea A A Dr. Gas SpinPro 4-Trap Square Muffl er The compact four-trap square muffler offers the smooth flow and throaty exhaust sound of the Dr. Gas SpinPro mufflers in a square design that fits into tight spaces. They feature an extremely rugged construction and are available in two case thicknesses with high temperature black and copper colored finishes. Made in USA. 2.5" Center Inlet/Center Outlet A black 9.5" x 9.5" x 3.25" ea A copper 9.5" x 9.5" x 3.25" ea 3" Center Inlet/Center Outlet A black 9.5" x 9.5" x 4.25" ea A copper 9.5" x 9.5" x 4.25" ea A A Dr. Gas FreqMod Muffl er Make your V-8 sound like an exotic sports car! Dr. Gas FreqMod mufflers modify the frequency to increase the pitch of your exhaust note. These compact mufflers fit most applications while offering exhaust flow comparable to the best performance mufflers. They should be used with an x-pipe for best results. Intended for extreme or race applications. Mufflers are available in high temperature black and copper colored finishes. For quieter application use Heavy Duty FreqMod mufflers. Made in USA. 2.5" Offset Inlet/Center Outlet A black 8.5" x 8.5" x 3.25" ea A copper 8.5" x 8.5" x 3.25" ea 3" Offset Inlet/Center Outlet A black 9.5" x 9.5" x 4.25" ea A copper 9.5" x 9.5" x 4.25" ea A A Dr. Gas SpinPro Reverse Flow Muffl er Dr. Gas SpinPro Reverse-Flow mufflers feature inlets and outlets on the same end. Perfect for side-exit systems with Boom Tube tips or where special routing is required. They feature very rugged construction and are available in high temperature black and copper colored finishes. Made in USA. 2.5" Offset Inlet/Offset Outlet A black 11.75" x 8.75" x 3.75" ea A copper 11.75" x 8.75" x 3.75" ea 3" Offset Inlet/Offset Outlet A black 11.75" x 8.75" x 3.75" ea A copper 11.75" x 8.75" x 3.75" ea A A Dr. Gas SpinPro 5-Trap Low Profi le Muffl er Only 3 thick! These mufflers produce an extremely smooth deep tone at a moderate volume level. In flow bench tests, these mufflers have shown the same performance as straight pipe of the same inlet/ outlet diameter. They feature an extremely rugged construction and are available in high temperature black and copper colored finishes. Made in USA. 2.5" Offset Inlet/Offset Outlet A black 18" x 7.5" x 3" ea A copper 18" x 7.5" x 3" ea 3" Offset Inlet/Offset Outlet A black 18" x 7.5" x 3" ea A copper 18" x 7.5" x 3" ea A A Dr. Gas SpinPro 3-Trap Muffl er These amazingly compact mufflers are very effective against rasp and popping while delivering a very smooth, deep tone. Flow rates are comparable to straight-through mufflers. Their extremely rugged construction utilizes fully welded 14 and 16 gauge aluminized steel with high-heat coatings. Available in black or a copper that looks great on rear-mount applications where mufflers are visible. Made in USA. 2" Offset Inlet/Offset Outlet A black 12" x 6.5" x 3.25" ea A copper 12" x 6.5" x 3.25" ea 2.5" Offset Inlet 2" Offset Outlet A black 12" x 6.5" x 3.25" ea A copper 12" x 6.5" x 3.25" ea 2.5" Offset Inlet/Offset Outlet A black 12" x 6.5" x 3.25" ea A copper 12" x 6.5" x 3.25" ea A black 12" x 6.5" x 4.25" ea A copper 12" x 6.5" x 4.25" ea 3" Offset Inlet 2.5"Offset Outlet A black 12" x 6.5" x 4.25" ea A copper 12" x 6.5" x 4.25" ea 3" Offset Inlet/Offset Outlet A black 12" x 6.5" x 4.25" ea A copper 12" x 6.5" x 4.25" ea 3.5" Offset Inlet 3"Offset Outlet A black 12" x 6.5" x 4.25" ea A copper 12" x 6.5" x 4.25" ea 3.5" Offset Inlet/Offset Outlet A black 12" x 6.5" x 4.25" ea A copper 12" x 6.5" x 4.25" ea Exhaust Accessories 557 Fuel & Exhaust L

39 THERMO-TEC TT1017 Flexible Heat Shield That Clips Into Place! The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material should be facing the heat source, and the aluminized side facing away offering protection from abrasion and harmful liquid spills. The Header Manifold Blanket is available in two sizes: (2) 20" by 24" blankets for V6 & V8 applications, and (1) 36" by 40" blanket for straight 6 & 4 cylinder engines. TT1017 V6-V8 applications pr TT1018 straight 6 or 4 cyl models ea TT1016 Reduce Under-HoodTemperatures The new quick-wrap, high-velocity Exhaust Jackets are an innovative way to insulate and block radiant heat. The jackets cover the header tubes vertically allowing for a consistent fit. The fit allows the exhaust system to expand as it comes up to operating temperatures without restrictions and provides air space for added insulation. This product uses Thermal Conduction Technology (TCT), developed by Thermo-Tec and can be applied with the headers in the vehicle. TT cylinder ea TT cylinder ea Micro Louver Air Shield Lightweight yet durable, the aluminum Micro Louver Air Shield features micro air louvers, which allow air to flow through the metal shield. The movement of the vehicle creates dynamic air flow, cooling by natural convection. The textured surface created by the micro air louvers creates more area for heat dissipation. The Micro Louver Air Shield is flexible yet durable; it bends and flexes easily by hand, making a custom fit trouble-free. TT " x 24" ea TT " x 24" ea TT " x 48" ea Heavy-Duty Spray Adhesive Heavy-Duty Spray Adhesive is the answer when you need a quick-drying, long-lasting spray adhesive for a high-temperature application. Extra-strong contactstyle adhesive sets quickly, and lasts even in high temperature situations. Use with Thermo-Guard FR, Cool-It Insulating Mat, Aluminized Heat Barrier and more. Comes in a large 16 oz. spray can. Note: Shipped within the continental U.S. only. Shipped ground only. TT ea Fuel & Exhaust L Reduce Under-Hood Temperatures! The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000 F, and contains no asbestos. Thermo-Tec exhaust wrap will not overinsulate a system when properly installed due to a proprietary coating developed by Thermo-Tec Thermal Conduction Technology (TCT) that conducts heat across the wrap's surface. This coating controls heat buildup and dissipation. The 1/16" thick wrap is available in 1 inch or 2 inch widths in 15' or 50' rolls. Choose from off-white or graphite black. Off-White Exhaust Wrap TT1009 1" x 15' short roll ea TT1011 2" x 15' short roll ea TT1010 1" x 50' long roll ea TT1012 2" x 50' long roll ea Graphite Black Exhaust Wrap TT1053 1" x 15' short roll ea TT1054 2" x 15' short roll ea TT1013 1" x 50' long roll, black ea TT1014 2" x 50' long roll, black ea natural Vermiculite Coated Header Wrap Insultherm Header Wrap is an extremely high temperature resistant wrap used to insulate hot gases in automotive exhausts. Manufactured from texturized fiberglass yarns that are woven into a strong, flexible wrap with vermiculite coating. Resists gasoline and engine chemicals and withstands temperatures up to 1200 F (maximum continuous temperature of 1000 F). Available in black or natural in 50' or 25' rolls. 1" Header Wrap HW black 1" x 50' ea HW natural 1" x 50' ea HW black 1" x 25' ea HW natural 1" x 25' ea 2" Header Wrap HW black 2" x 50' ea HW natural 2" x 50' ea HW black 2" x 25' ea HW natural 2" x 25' ea TT12001 TT12002 TT12003 Hi-Heat Coating To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating. The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids. The coating also works excellent as a paint directly on metal surfaces. TT oz. black ea TT oz. aluminum ea TT oz. copper ea 558 Thermo-Tec Products Toll Free Order Line black