Custom Corn Heads. Jan

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Custom Corn Heads. Jan"

Transcription

1 1 Custom Corn Heads Phone: Fax: Website: E PO Box th Ave. Howard SD Jan

2 2 Statement of Policies Office Hours Ordering Information Monday Friday 7:30AM-5:00PM Central Time To place an order call our toll free number Payment Types Payments may be made by Visa, MasterCard, Discover, or checks. Returns To return new, unused product within 15 days of delivery for a full refund minus a 20% restock fee. If product is defective there will be no restock fee. All merchandise to be returned must have proper authorization from Clarke Machine Inc. and be shipped freight prepaid. Send Returns To: Clarke Machine Inc th Ave. Howard SD Shortages & Claims Check merchandise immediately upon receipt and report any error at once. If a part of a shipment is missing or received in bad condition, do not fail to note this fact on carrier s receipt and make claim upon carrier promptly. Warranty Contact Clarke Machine Inc. for Details Prices Pric- All prices Subject to Change es effective: 01/20/17 Clarke Machine Inc. warrants products manufactured by and distributed by Clarke Machine Inc, to be free from defects in material and workmanship. The right is reserved to make changes at any time without notice or obligation.

3 3 CATALOG INDEX John Deere Cornheads 40 and 90 series Page series Page NH and CNH Cornheads series IH Page series CNH Page NH 96C 98C Page SERIES CNH Page NH 98D Page 35 37

4 4 To Order Call: Page 4 18 row 20 inch in 12 row 30 inch Row Crop Frame Kits includes auger and hex drive shafts 8 row 30 inch Head Widths to 40 foot or beyond Row Widths from 15 to 38 widths CM Frames for 600C Series row units NEW ITEM CM Frames std and low profile for 40 or 90 series JD row units CM Frame Kit for IH 800, series CM Frame Kit for Case 2200 or 2400 or 3400 CM Frame Kit for CNH 96C or 98C or 98D

5 To Order Call: C/M Poly Row Dividers Standard or Bi-Fold 5 All C/M Poly has these Advantages Stainless Steel wear strips on all rows Choose Color to Match Machinery Rubber Ear Savers on all rows Powder Coated Metal Parts Easy Installation 30 inch Standard Poly $ each 20 & 22 inch Standard Poly $ each 30 Standard Poly 1083 Header Poly available for corn heads manufactured by JD IH NH GL Rubber ear savers for Standard C/M Std. Poly & 40 Series Center $7.70 ea Wear Tip for C/M Standard Poly centers (Steel) $23.10ea Wear Tip for C/M Std. Poly centers (Poly) WPC $23.10ea Wear Tip for C/M Std. Ends (Steel) Wear Tip for C/M Std. Ends (Poly) Wear Tip for C/M 15 Centers (Steel) WPE $23.10 ea $23.10 ea $23.75 ea End Deflectors $ ea Order # End Deflectors Fits many applications for poly and steel

6 6 Clarke Machine Inc. 18 Row 20 inch Bifold Poly Row Divider 20 & 22 inch Bi-Fold Poly RowDivider $ each 20 Bi-old to Cat Challenger Combine 30 Bifold 1083 Header Bi-Fold Poly Advantages Snouts can be raised to vertical position to reduce road and storage width. Ends can be removed easily for maintenance. (no tools required) Designed especially for lower profile Corn Heads. Ear Saver for 30 Inch Bifold Center Row Dividers Order # $43.20 ea 30 inch Bi-Fold Poly Row Divider $ Bi Fold Poly not available for 800 IH Rubber Ear Saver: For C/M Bi-Fold Poly 20 Center $7.70 ea 20 End $7.70 ea 30 Center $7.70 ea 30 End $7.70 ea Wear Tips for CM Bifold Poly Steel Wear Tip (30 Centers) $34.00 ea Steel Wear Tip (20 Centers 30 Ends $34.00 ea 30 Bifold 843JD hinged on rear for maintenance. Steel Wear Tip (20 Ends) $34.00 ea

7 Page 7 To Order Call: Wedge Kit for JD Corn Heads (Standard shown) Reduces Angle of the Corn Head on Older John Deere Corns heads. Does not fit directly on pre 79 Corn Heads. Can also be used on John Deere 600C Corn heads. C/M Wedge Kit Standard 6 Degree KIT Price $ ea C/M Wedge Kit Special 9 Degree KIT Price $ ea Corn saver Easily mounts to Corn Head for JD for CNH 2200 s Specify Your Head size Price $ ea.

8 8 Clarke Machine Inc. Hanger for Drive Shaft shafts Bolt to Corn Head for Drive Shaft Storage For 1 3/8 21 spline ends Price $25.85 ea Kit Price $51.70 pr For 1 1/8 hex ends Price $25.85ea Kit Price $51.70 pr For 1 3/8 6 spline ends Price $25.85 ea Kit Price $51.70 pr Hanger Brace Corn Head Mount on Corn Head for support for Drive Shaft s Hanger kit consists of 1 upright post , 1 bearing plate , 1 bearing /8 hex, bolts and 2 flangettes. 1 side only $88.00 ea 2 posts complete L & R KIT $ ea Hanger parts Upright post $34.10 ea 3 hole plate $18.70 ea 4 hole plate $ ea Flex Head 3 hole weld on plate for flex head W/ 1 1/8 hex bearing and flanges $34.65 ea KIT $64.35 ea

9 To Order Call: Drive Shafts Waltersheid 2400 Series Order # Price $ ea. 1 3/8 21 spline slip yoke to 1 1/8 Hex Interfering 35 collapsed Order # short Price ea 1 3/8 21 spline slip yoke to 1 1/8 Hex Interfering 29 collapsed Order # Price $ /8 21 spline slip yoke to 1 1/4 Hex Interfering 35 collapsed Order # Price $ /8 21 spline slip yoke to 1 1/4 Hex Free Motion 59 collapsed Order # Price $ ea 1 3/8 21 spline slip yoke to 1 1/4 Hex Free Motion 35 collapsed Order # Price $ ea 1 3/8 21 spline slip yoke to 1 1/8 Hex Free Motion 35 collapsed Order # Price $ ea 1 3/8 21 spline slip yoke to 1 1/4 Hex Free Motion 48 collapsed Order # Price $ ea 1 1/8 Hex Slip Yoke to 1 1/8 Interfering 35 collapsed Order # Price $ ea 1 1/8 Hex Slip Yoke to 1 1/4 Interfering 35 collapsed Order # Price $ ea 1 3/8 6 Spline Slip Yoke to 1 1/8 Hex Interfering 35 collapsed Order # short Price $ ea 1 3/8 6 Spline Slip Yoke to 1 1/8 Hex Interfering 29 col lapsed Order # Price $ ea 1 3/8 6 Spline Slip Yoke to 1 1/4 Hex Interfering 35 collapsed Order # Price ea 1 3/8 6 Spline Slip Yoke to 1 1/2 Hex Interfering 2400 Series 48 collapsed Order # (CM Made) Price $ ea 1 3/8 6 Spline Slip Yoke to 1 1/4 Hex Free Motion 48 collapsed Order # Price $ No Yokes 48 Center of Joint to Center of Joint Order # Price $ ea No Yokes 30 Center of Joint to Center of Joint Order # Price $ ea 1 3/8 6 Spline Slip Yoke to 1 1/8 Hex Interfering 57 collapsed Order # Price $ ea 1 3/8 6 Spline Slip Yoke to 1 1/4 Hex Interfering 57 collapsed For Drive Shaft s on combines with sprocket on reverser side (Example 9600). 1 1/8 hex output shaft with drive plate 1ea & 1ea /8 21 spline output shaft w/ drive plate 1ea & 1ea Kit $82.50 ea Kit $ To drive 1 3/8 21 spline Drive Shaft s on combines with 1 1/8 hex output shafts (Example 9600 RH Side, 9500 both sides, or IH Combines) /8 hex combine output shaft to 1 3/8 21 spline $107.25

10 10 Clarke Machine Inc. PTO Components for Waltersheid 2400 Series 2400 series joint $53.46 End yoke 1 3/8 6 spline slip $61.50 End yoke 1 3/8 21 spline slip $67.00 End yoke 1 1/8 slip $ End yoke 1 1/8 hex interfering $ End yoke 1 1/4 hex interfering $ Inboard yoke 1B small tube $59.40 Inboard yoke 2A large tube $59.40 Free motion yoke 11/8 hex $ Free motion yoke 1 1/4 hex $ Inner profile tube $82.00 Outer profile tube $88.10 Inner shield tube (round) $46.50 Outer shield tube (oval) $37.95 Inner shield tube 1000 mm $32.00 Outer shield 1000 mm $32.00 Inner shield tube $40.15 Outer shield tube $42.10 Shield cone 6 rib $8.75 Shield cone 12 rib $15.75 Shield cone 9 rib $21.60 Bearing ring SSC $4.05 Support bearing $ /8 Hex Slide collar kit $ /8 X21 spline slide kit $29.95 collar yoke ( Lexion) $75.00 End yoke 1 1/2 hex interfering $ Series 1 3/8 6 spline slip $ series joint $56.50

11 To Order Call: C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT EXACT REPLACEMENT FOR 30 INCH CENTER DIVIDER ON JD 90 SERIES CORN HEADS MOLDED FOR OPTIONAL STAINLESS WEAR STRIPS NEW ITEM Part # Prior to SN Price $ With SS Strips $ Part # SN & up Price $ With SS Strips $ Part # Fit all 30IN. 90 Series Price $ For JD OEM 90 Series Poly Old Style $4.15ea Replaces JD# H New Style $4.45 ea Replaces JD # H166582

12 12 Clarke Machine Inc. C/M Steel Oil Cover w/door Fits 40 and 90 series SN( ) Kit $ ea Replaces JD#AH C/M Poly Oil Cover w/door Fits 90 series SN ( ) Replaces JD#AH C/M Steel Welded Oil Cover w/door ( ) Replaces JD#AH Kit Kit $ ea $ ea C/M Steel Welded Oil Cover w/door Fits 600 series Replaces JD#AH $ ea Inspection Door Gasket $7.70 ea Does your drive chain loosen up?? Some Corn Heads when put in reverse have been known to have the Idler slide up. This strap and washer prevents that from happening. Outside adjustment strap special CM made, outside washer locks in place on strap. Replaces JD#H Strap with 1/2 slot & pinned washer Strap with 3/4 slot & pinned washer Kit $19.25 ea Kit $19.25 ea Weld on slide strap $8.80 ea Weld on stop $2.40 ea Complete assembly W/ Sprocket and Wear Bolt for HD 80 Chain Kit $ ea Auger Chain Tightener Strap Replaces JD#H $29.70 ea Strap Replaces JD#H $33.00 ea Slide Assembly w/pulley Kit $79.20 ea Slide Assembly w/60 sprocket. Kit $79.20 ea Idler Sprockets and Pulley 60 chain 15 tooth 1/2 hole $20.90 ea 60 chain 15 tooth 5/8 hole $20.90 ea 80 chain 12 tooth 3/4 hole $47.30 ea 3/4 to 1/2 reducer bushing $1.10 ea Auger Idler pulley Replaces JD#H $17.60 ea

13 Page 13 To Order Call: HT Denotes Hardened Teeth - Add $25.00 for Welding 13 To Order # # Chain # Teeth Price Z-50 X $82.00 Z-50 X $ Z-60 X 13HT $23.60 Z-60 X16HT $30.00 Z-60 X 17HT $32.50 Z-60 X 18HT $35.00 Z-60 X 20HT $40.00 Z-60 X 21HT $43.00 Z-60 X 22HT $46.00 Z-60 X 24HT $51.50 Z-60 X 26HT $57.50 Z-60 X $63.50 Z-60 X $69.50 Z-60 X $ Z-60 X $ Z-80 X 16HT $56.50 Z-80 X 17HT $62.00 Z-80 X 18HT $66.50 Z-80 X 19HT $71.50 Z-80 X $76.50 Z-80 X $81.50 Z-80 X $96.50 Z-80 X $ Z-80 X $ Z-80 X $ /8 X 1 Hex End Drive Hub $ /4 X 1 Hex End Drive Hub $ /8 X 2 Hex Auger Hub $ /4 X 1 3/4 Hex Auger Hub $30.00

14 14 Clarke Machine Inc. Convert your Head to 1 1/4 hex drive??? Hex Drive for Corn Heads We have many new and used parts 1 1/8 Hex drive shafts From $ Add per ft. over /4 Hex drive shafts From $ Add per ft. over /2 Hex drive shafts From $ Add $29.28 per ft. over 12 Custom made to order Price according to Length Weld on Collar stops 1 1/8 Hex Collar (weld on) $17.60 ea 1 1/4 Hex Collar (weld on) $16.50 ea 1 1/8 shaft spacer (2 7/8 ) $22.55 ea 1 1/4 shaft spacer (2 7/8 ) $22.55 ea Hex Couplers 1 1/8 Hex coupler (4 1/2 long) $44.00 ea 1 1/4 Hex coupler (4 1/2 long) $49.50 ea 1 1/2 Hex coupler (4 1/2 long) Hex Bearings $54.50 ea 1 1/8 Hex Bearings 72MM $24.20 ea 1 1/4 Hex Bearings72MM $35.75 ea 1 1/4 Hex Bearings 80MM $41.80 ea 1 3/8 Hex Bearing 80MM Flangettes $44.30 ea 72mm 3 bolt Round Z-72-MS $4.95 ea 72mm 3 bolt Triangle Z-72-MSTR $4.95 ea 80mm 4 bolt round Z-80MS $6.85 ea

15 To Order Call: We build augers to your specifications Specify brand (Color) and frame length, other sizes also available Auger HD 1083 Assembly $1, Auger 8 tube 4 flighting to 24 length 16 OD-16 P $1, ea Auger 6 tube 5 flighting to 20 length 16 OD 20 P $1, ea Auger Auger 6 tube 4 flighting to 20 length 14 OD-18 P 6 tube 6 flighting to 24 length 18 OD-27 P $1, $1, Auger Drive Plug 1 1/8 Hex Auger Drive Plug 1 1/4 Hex Auger Parts $140.00ea $ ea Double auger reverse flighting and stripper plate kit for 6 tube $ ea Auger flap 1/2 x 4 : $9.35 ea Auger flaps 1/2 x $10.45 ea Strap Weld On $5.50 ea Strap Bolt On $4.95 ea Bearing Plate for auger on Newer 90 series 3 hole plate Replaces JD#H $24.20 ea Auger Chain Cover 40 series $73.70 ea Auger Chain Cover For low profile frames $73.70 ea Description Order # Price Auger drive sprocket 50 chain slow down sprocket 50 chain 65 tooth $ ea Auger drive sprocket 60 chain slow down sprocket 60 chain 54 tooth $ ea

16 16 Clarke Machine Inc. CM Hydraulic Auger Drive Infinite speed control of auger speed. Reduces ear toss substantially Driven from reel drive hydraulics Fits single auger corn heads (thru 8 row wide) Order# Series JD Price $$ Series JD Price $1, CM Hydraulic Double Auger Drive Infinite speed control of auger speed. Reduces ear toss substantially Driven from reel drive hydraulics Fits double auger corn heads (thru 18 row 20 inch) Order# Series JD Price $ Series JD Price $ Rear Shaft Auger Drive Slowdown Auger Drive for 40 and 90 Series JD 40 series prior to 81 models may require additional parts CHAIN SLIDE ADJUSTMENT NOT INCLUDED Rear shaft auger drive for anyone who has sped up the drive sprockets to faster than a 1 to 1 ratio. Kit # For 1 1/8 hex RH side Kit # For 1 1/8 hex LH side Kit # For 1 1/4 hex RH side Kit # For 1 1/4 hex LH side Reduce auger speed by approx. 19% Convert your head to rear drive with this kit. Requires head modification, some cutting and welding Price $ ea

17 To Order Call: CM5000 Row Units Fit Series JD COMPLETE READY TO BOLT ON FRAME with clutch 1 1/8 hex or 1 1/4 hex List Price $3, CM Knife rollers - Hydraulic decks List Price $2, Tapered rollers - Hydraulic decks Call for Quantity discount pricing on multiple units. 6 or more take 10% off Replacement Gearbox (All New Components) for JD series Corn Heads except 1293 S/N up Order # Price 1, Gearbox assembly for 1293 S/N up Includes C/M HD Casting for C/M Knife Rolls & Quick Coupler # Order # Price $1, For CM15 with HD casting& long upright shaft Order # Price $1, Replacement Jaw Clutches for JD series Corn Heads also fits CM5000 row units and Gearbox above. For 40 and 90 Series Heads Row Unit drive with 1 1/8 inch Hex Hub w/quick coupler) Order $ each Replaces JD AH & N For individual parts see our

18 18 Clarke Machine Inc. For 90 Series Heads (1293 SN ) Row Unit Drive with 1 1/4inch Hex Hub (w/quick coupler) Order $ Each Replaces JD#AH & H For individual parts see our web- Auger Drive Clutches For 40 & 90 Series Heads SN -(659999) Auger drive with 1 1/8 inch Hex Hub #50 chain with 17 teeth sprocket Order $397.77each No JD Assembly Available For individual parts see our For 90 Series Heads SN ( ) Auger drive with 1 1/8 inch Hex Hub #60 chain with 13 teeth sprocket Order $ each No JD Assembly Available For individual parts see our website For 90 Series Heads (1293 SN ) Auger drive with 1 1/4 inch Hex Hub #60 chain with 13 teeth sprocket Order $ each No JD Assembly Available For individual parts see our

19 To Order Call: Do you want to convert your auger to #60 chain drive??? Heavy Duty Auger Drive and Slowdown Kit for JD 40 series and early 90 s with 50 chain drive on auger. Reduce auger speed by approx. 15% Convert your Head to 60 chain drive on auger with this kit. Replaces Auger Clutch Drive Sprocket, Auger Sprocket, Idler and Chain. Order # Price $ ea Kit includes 1 each of the following , , , some washers and 10 box chain Z Auger Slip Clutch Parts Drive Sprocket 50C 17T $ ea Rep JD#AH Hub 1 1/ $ ea Replaces JD#H Jaw $33.82 ea Replaces JD#N Washer $3.06 ea Replaces JD#H99303 Spring $13.75 ea Replaces JD#H Housing $ ea Replaces JD#H Drive Sprocket 60C 13T $ ea Replaces JD#AH Hub 1 1/ $ ea Replaces JD#H Hub 1 1/ $ ea Replaces JD#H Jaw $43.34 ea Replaces JD# Spring $16.20ea Replaces JD#101276

20 20 Clarke Machine Inc. Description Order# Price Row Unit Slip Clutch Parts Housing $ ea Replaces JD# AH Quick Coupler $63.89 ea Quick Coupler 1 1/ $64.24 ea Jaw $33.82 ea Hub 1-1/8 Rep JD#N $114.70ea Hub 1 1/4 Rep JD#H $ ea Spring $43.05 ea Retainer $12.67 ea Replaces JD#N Spacer Bushing $3.83 ea

21 To Order Call: C/M Knife Roller For John Deere Corn Heads Replacement Parts for Knife Rollers Blades $59.40 ea The C/M Knife Roller kit is a complete interchange for the stalk rolls you are currently using on either 40 or 90 series JD Corn Heads. New cast roller with 2 bolt on Knives with two cutting edges each. (Knives can be interchanged with CNH # ) Blades are reversible and can be replaced individually without removing the stalk roll from the row unit. The cutting edge of the knife is coated with long wearing tungsten carbide and heat treated making them extremely sharp and durable. The coating on one side of the knife produces a self sharpening design that ensures consistent performance throughout the life of the knife. Knife stalk roll are recommended for customers who demand aggressive residue processing across a broad range of conditions. This roller kit is not a substitute for a Chopping Corn Head. Open area between rollers during rotation allows stalks to travel up the roller, because of forward movement of the combine, and rotation of the gathering chain. LH Casting $ ea Free Freight RH Casting $ ea Tube $47.85 ea Blade Kit $ ea Stock Roller Barrel Assy Bolt Kit Per Blade Bolt (Blade) Flange Nut (Blade) Roll Pin Kit Squeeze Bolt KIT Z-1225-TX Z-12-MN KR-SPRING PIN KIT Z-1030TX $ ea $3.60 ea $1.45 ea $.85 ea $3.60 ea $1.10 ea Knife Roller Kit KIT Price $ ea Row Includes 2 new roller assemblies 1 LH and 1 RH which include new cast spirals, tubing blades and hardware. Also includes a new stalk roller barrel assembly, with needle bearings, seals and gaskets.

22 22 Cutting Action Clarke Machine Inc. CM Knifed Stalks Forward Movement A puller to remove your old stalk rolls is available

23 To Order Call: Description Order # Price Gathering Chain ( 48 Pitch ) USA Fits JD 40 & 90, IH USA Import $42.35 ea $27.50 ea Gathering Chain Chrome Pin ( 48 Pitch ) USA Fits JD 40 & 90, IH Gathering Chain Shorter Tab length Fits C/M 15 inch heads, JD 40 & 90, CNH 2200, 2400,3499 ( 48 Pitch )USA Gathering Chain Shorter length for use with 6 tooth sprocket ( 47 Pitch )Import Gathering Chain Guide Fabricated Bent Steel JD#H Fits all 40 and 90 series $55.00 ea $45.65 ea $36.75 ea $18.95 ea Gathering Chain Idler Sprocket JD#AN Fits JD 40 to SN Non Grease-able Idler Gathering Chain Idler Sprocket Fits JD 40 & 90 after SN Grease-able Idler JD#AH ea $13.50 ea Fits JD 40 & 90 JD#H85252 Hardened 8 tooth $17.50 ea Fits JD 40 & 90 and CM 15 inch Corn heads 6 tooth Hardened $34.50 ea Idler arm Assembly Fits JD 40 & 90 after SN Kit $56.00 ea kit Idler arm Hardened Fits JD 40 Prior SN Fits JD 40 & 90 after SN $38.50 ea $38.50 ea 5/8 x 2 3/4 Plow Bolt for Arm Z PB $2.25 ea /8 NC Nut Z-58-N $0.32 ea O-ring for Arm Z-5818-OR $0.32 ea Idler Grease Bushing w/ grease-zerk $6.50 ea Idler Spacer Tube $7.00 ea Gathering Chain Idler Tension Spring Fits JD 40 & 90 JD#N $4.00 ea Gathering Chain Idler Tension Bolt Fits JD 40 & 90 JD#08H $4.25 ea

24 24 Clarke Machine Inc. Description Order# Price Gathering Chain Idler Block $21.95 ea Hardened Fits JD 40 Series JD#H84479 Gathering Chain Idler Block $39.00 ea Hardened Fits CM 15 inch Special milled surface Gathering Chain Idler Block $32.50 ea Hardened Fits 40 & 90 Series Tapered Flute Stalk Roller Replaces JD# & 91 Straight Flute JD#H & 39 Knife Roller Spiral (JD Style) Spiral roller (JD style knife) RH & LH $67.50 ea RH & LH $ ea RH & LH $ ea Knife Halves (JD style) RH & LH $ ea See page 16 for C/M Knife Rollers Deck Plate LH & RH 1/4 thick Hard surfaced Fits JD 40 to SN44665 W-Non Grease-able Idler Flat $21.95 ea Bent L $34.50 ea R $34.50 ea Deck Plate LH & RH 3/16 thick Hard surfaced Hard surfaced for non-hydraulic Fits JD 40 & 90 after SN Grease-able Idler Flat $21.95 ea Bent L & R $34.50 ea Deck Plate 3/16 thick, Hard surfaced Fits 90 series w Hydraulic Decks LH Side only Replaces JD#AH $75.50 ea Bent LH (Hydraulic side) L $80.00 ea Upper Plate Spacer $65.00 ea Replaces JD#AH Trash Knives for 90 Series JD RH $37.50 ea Straight Flute & Knife Rolls Trash Knives for JD 40 Series RH $37.50 ea Tapered Flute Rolls LH $37.50 ea

25 To Order Call: Replacement Gearbox parts for JD Stalk Roll Barrel Replaces JD#AH84853 with 2 needle bearings & 2 front Seals Stalk Roll Barrel - Used Replaces JD#AH84853 Gasket Shim, Stalk Roll Barrel Replaces JD#N & Needle Bearing Replaces JD#JD9900 Seal,Stalk Roll Replaces JD#AN Ball Bearing Replaces JD#JD9415 Roller Shaft Replaces JD#AH Side Clutch Shaft Seal Replaces JD#AN Top Seal Upright Shaft Replaces JD#AN71326 Top Bushing Upright Shaft Replaces JD#H83875 Upright Shaft: Shaft only, does not include gear, use your old gear welded to new shaft JD#AH For 40 and 90 except the round shaft Snap Ring (Drive Sprocket) For round shafts order Kit used $ ea $ ea $2.00 ea $9.25 ea $6.25 ea $25.50 ea $99.50 ea $8.75 ea $4.00ea $5.00 ea $55.00 ea $2.00 ea $55.00 ea Replacement upright gear and shaft for JD AH ( JD cost $185.00) New Shaft w/ used gear C/M Part # $ ea w/ exchange $ ea Gearcase for 40 or 90 Series JD Replacement for JD#H Eyebolt (Gear Case) $ ea $12.49 ea Intermediate gear for 40 or 90 Series JDRow Unit Gear Box Replacement for JD#AH $ ea

26 26 Clarke Machine Inc. Individual kits Description Order # Price Hydraulic Deck Kit order 1 per row for JD 40 & 90 after SN includes ( , , , , , , and hardware) Hydraulic Deck Kits Kit A $ ea KIT A Hydraulic Deck Completion Kit order 1 per Head for JD 40 & 90 Kit includes: (cylinder, hoses, hydraulic elbows, restrictor, bar connector, weld on anchor bracket ) Hydraulic cylinder only Kit B $ ea $ KIT B ea Hydraulic Deck Completion Kit order 1 per Head for JD series combines includes: (coupler ends, hydraulic elbows, brackets.) Kit C or $ ea Hydraulic Deck Completion Kit order 1 per head for JD 60 series combines includes: ( coupler assy, lever, mount, snap ring, plug, pad, bolts) Hydraulic Deck Plate Indicator (manual) for combines prior to 50 series Cable only Kit C hoses Kit D Hydraulic Deck Pipe Kit - Kit E Single Pipe Assembly w/ Connectors Row Row Row 20 - Order Full Hydraulic Deck Kits 693 or 643 after SN to series combines complete kit (6-Kit A 1-Kit B 1-Kit C 1-Kit D) Manual 1-Kit E) $ Ea $28.50 Ea $ $ $17.00 ea $45.50ea $56.70 ea $91.00 ea $2, or 843 after SN to series combines complete kit (8-Kit A 1-Kit B 1-Kit C 1-Kit D manual 1 Kit E) $2, or 1243 after SN to series combines complete kit (12-Kit A 1-Kit B 1-Kit C 1- Kit D manual 1 Kit E) $4, For 40 Series prior to SN Order $ ea Includes 2 idler arm assy. & 3/16 RH Deckplate Kit E

27 To Order Call: SS Repairs for JD 90 Series Poly Head Serial number > ( Head Serial Number to ) for Centers for Ends for & 1096 LH & RH JD 90 series poly snout wear strips to Serial Number ,22 30 Examples AH141626, AH141627, AH145269, AH146188, AH146577, AH Fits JD Permaglide $30.25 ea & 1663 LH & RH Center poly snout wear strips Examples AH & AH & 1763 LH & RH End poly snout wear strips Example AH & 1880 LH & RH Center and End snout wear strips For inch poly Examples AH and AH $30.25 When ordering use Part Number embossed in poly to get correct parts. Mounting Hardware Supplied 16 X 4 1 1/2 Rear Wear Panels concave profile SS Wear Panel For: JD 90 series poly 30 only and End Panels Examples AH141628, AH141629, AH145271, AH145272, AH158243, AH158244, AH158245, AH160068, AH160069, AH174051, $ has flatter profile SS Wear Panel For JD Poly Examples AH149893, AH149894, AH158423, AH158424, AH158425, AH160065, AH Fits JD Permaglide

28 28 Clarke Machine Inc. C/M Warning Light Kit order # KIT Includes: weld on bracket, pivot clamps, rubber isolators, lamps, tube, reflective shield and bolts with harness Price $ ea C/M Stubble Light Kit order # KIT Includes 2 lamps, mounting brackets, & harness Price $ ea Electrical adapters 50 series 31 pin adapter cable to 60 & 70 series 31 pin single point hook up $229.35ea Adapts 60 series single point and 600C & F to a 50 series combine $233.20ea series Headsight $297.00ea Z-length -Ext 60 series Headsight $297.00ea Harness extensions 54 Inch Z-54-WPH $24.75ea Harness extensions 72 Inch Z-72-WPH $26.95ea 50 series headsight 60 series headsight CM warning light harness $64.35ea CM stubble light harness $41.80ea 60 series short harness w/hyd conn $146.30ea Stubble Light harness $24.20ea

29 To Order Call: Parts for JD 600 Series Cornheads Gathering Chain USA $65.95 ea Drive Sprocket $40.65 ea Idler Sprocket $49.45 ea Bearing Cap $5.80 ea Replacement Bearing for $6.35 ea Stripper Plate RH(Flat) to SN# $59.50 ea Stripper Plate RH(Bent) to SN# $45.95 ea Stripper Plate LH(Bent) to SN# $69.95 ea Stripper Plate LH(Flat) to SN# $86.90 ea Stripper Plate RH Bent SN# up B $93.50 ea Stripper Plate LH Bent SN# up B $ ea Chopper Blade $21.20 ea Pivot Bushing (Chopper Blade) $7.46 ea Hydraulic Stripper Plate Indicator (Manual) To Serial # KIT $ ea Upright gathering drive shaft to serial # Without gear $55.00 ea W/Exchange $ ea

30 30 Clarke Machine Inc. Wear Strips for JD 600 Series 30 Inch Poly Snouts LH & RH JD 600 series poly 30 inch snout wear strips $30.25 ea Mounting Hardware Supplied Rear Wear Panels has flatter profile SS Wear Panel For: JD 600C series poly 600C 30 only $20.50 ea 16 X 4 1 1/2

31 Gathering Chain Fits IH ( 48 Pitch ) USA Gathering Chain Fits IH (48 Pitch) Import To Order Call: IH Corn Head Parts US A $42.35 ea $27.50 ea. 31 Replacement upright shaft for IH 800 series gearboxes. Changes shaft from roll pin to woodruff key (includes Key, snap ring, washer and nut.) Special Replacement sprocket for IH Corn heads 800 s with conversion shaft and series 8 tooth 1 dia w/keyway Drive sprocket series 10 tooth 1 dia w/roll pin hole & Keyway $51.00 ea $30.00 ea $21.00 ea Gathering Chain Idler Sprocket Fits IH NH CNH# Bushing for stalk roll support series Replaces CNH#176311C $12.00 ea $6.50 ea Bushing (Replaces needle Brg) Stalk roller bearing 1000 series SN# and above Replaces IH# Stalk roller bearing shield 1000 series SN# and above Replaces IH#327913A2 Stalk roller bearing Kit Includes 1 ea. of and Sealed bearing (Water Pump) Stalk roller kit series IH (I row with knives) Stalk roller spiral LH (Water Pump Style) Replaces CNH# Stalk roller spiral RH (Water Pump Style) Replaces CNH# $11.46 ea $25.00 ea $7.50 ea Kit Kit C C $32.00 ea $ ea $87.95 ea $87.95 ea

32 32 Clarke Machine Inc. CNH & IH Corn Head Parts Shim (Bearing Support).032 C $2.10 ea Shim (Bearing Support).032 C $1.55 ea Shim (Bearing Support).010 C $1.38 ea Stalk roller shaft (Water Pump Style) LH & RH Replaces CNH# C $ ea RH Bearing Support C $54.95 ea LH Bearing Support C $54.95 ea Drive coupling series $19.50 ea Replaces IH#176301C2 Knives 800 series $14.85 ea Replaces IH#176304C series $14.85 ea Chain Guide series $17.50 ea Replaces IH# C1 Deck plate LH & RH LH $32.50 ea Replaces IH#199381C RH $32.50 ea C/M Special Flat series LH & RH $38.00 ea Deck plate Bent 800 series LH LH $32.50 ea Replaces IH#176291C RH $32.50 ea C/M Special Flat 800 series $35.00 ea LH & RH Gatherer Idler SupportLH C $ ea Gatherer Idler SupportRH C $ ea Idler Adjustment Assy.LH C $54.45 ea Idler Adjustment Assy.RH C $54.45 ea Full Hydraulic Deck Kit for series 6 Row Kit (Bent) B $2, ea (Flat) $2, ea 8 Row Kit (Bent ) B $2, ea (Flat) $2, ea

33 To Order Call: Description Order # Price Each Frame ( Row Unit) ( HD) $1, ea Fits 900 & 1000 Series Top Plate ( Row Unit Frame) $38.50 ea Fits 900 & 1000 Series Wear Bar Fits 800, 900,1000 Series Inner Gatherer Snout (30 ) $ ea (Steel) Replaces CNH# c , 2400, , 96C, 98C, 98D Repair Panels For Broken Snouts For 30 inch centers $38.50 ea.

34 34 Clarke Machine Inc. Stainless Steel Wear Strips For 1000 Series IH Poly & 1101 SS Snout Wear Strips $18.50 ea SS Wear Panel Center Dividers Only Not for End Panels $18.50 ea SS Rear Wear Panel $18.50 ea. Adapter Kits to mount 1000 series NEW ITEM (1083, 1063, 1084) on AFX Flagship Combine Order # NEW ITEM

35 To Order Call: Parts for C-98C-98D Description Order# Price Spiral Stalk Roller LH C $ ea Spiral Stalk Roller RH C $ ea Shim (Spiral Cone) C $ 6.33 ea Idler Arm A $22.07 ea Idler Block A $ ea Wear Plate Replaces $32.50 ea Deck plate LH Bent LH $32.50 ea RH Bent RH $32.50 ea Deck plate LH Not Bent LH $38.00 ea RH Not Bent RH $38.00 ea Hydraulic Adjustable LH Bent Replaces CNH # $59.50 ea C/M Special Flat Hydraulic LH $65.00 ea C/M Steel Oil Cover w/door fits 2200, 2400,3400 heads Replaces Poly CNH# $ ea Faster Hydraulic Single Point Hookup 2 port LAN2P A F C $ ea 5 port LAN2P A F C $ ea Fittings with restrictor $10.00 ea Without restrictor $5.00 ea Drive sprocket NH 96C 98C 98D $21.00 ea Gathering Chain $45.65 ea Replaces CNH # ( 48 Pitch ) USA Chain guide series $28.75 ea Replaces CNH# Knife $59.40 ea Replaces CNH# Blade Kit (Includes 4 Knives and $ ea Stalk Roller Tube only $40.00ea (Reuse tapered cast hub)

36 36 Clarke Machine Inc. Parts for C-98C-98D Description Order# Price Auger Slip Clutch Sproket $ ea. (14 Teeth #60 Chain) Replaces CNH# Auger Slip Clutch Plate $85.50 ea. Replaces CNH#

37 To Order Call: Clarke Machine Inc. For Case and New Holland Heads SS Snout Wear Strips 2200, 2400,3400, , 96C, 98C, 98D LH RH For 30 inch centers $34.00 Ea. Mounting hardware supplied CNH Poly SS Wear Panel 2200,2400, 3400, , 96C, 98C 98D $27.00 ea /22 CNH Poly SS Wear Panel Centers only use 1104 for end panels 2200,2400, , 96C, 98C,98D $27.00 ea /22 CNH Poly SS Wear Panel for End panels only 2200,2400, , 96C, 98C,98D

38 38 To Order Call: We offer several models of adapters. Order # $ AFX Combine to 2200 Series CNH Head wyokes Order # $ IH Standard drive combine to JD Corn head Order # $ IH Terrain tracker combine to JD Corn head Order # $ Combine to 2200 CNH Corn head Order # $ AFX or CR combine to JD Corn head Order # $ TR combine to JD Corn head Order # $ AGCO combine to JD Corn head Order # $ Lexion combine to JD Corn head 4 1/8 0ffset on 8 rows Order # $ Lexion combine to 2200 CNH Corn head Order # $ Top Tube Cap Order # $ JD 50 or 60 series to 2200 & 2400 CNH w/yokes Order # $ JD 50 or 60 series to 96C & 98C CNH w/yokes Order # $ AFX to JD 600 Corn Head (Adapter only) Order # HCO1H23-31Q $ (Plus Freight) Headsight adapter Order # LAN2P AFC $ (Hydraulic Single Point Hookup ) Order # $ each (57 Pto s 1 1/4 Hex to 1 3/8 6 Spline) Order # $ AFX combine to IH 1083 Cornhead (Less PTO S) Order # $ each (1 1/8 Hex to 1 3/8 Spline) Order # KIT $51.70 pair ( PTO Storage Hangers) Total adapter with PTO S and Hangers = $

39 Clarke Machine Inc. 39 Prices effective: 01/20/17 All prices Subject to Change Edited:01/20/17 DBC The right is reserved to make changes at any time without notice or obligation th Ave. PO Box 694 Howard SD Phone: Fax: Website:

40 40 Clarke Machine Inc. PO Box th ave. Howard SD Mail to: Stamp

C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT

C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT To Order Call: 1-800-658-4568 11 C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT EXACT REPLACEMENT FOR 30 INCH CENTER DIVIDER

More information

Model 873 COMBINE ADAPTER

Model 873 COMBINE ADAPTER Model 873 COMBINE ADAPTER For 963, 972, 973 & 974 Headers on: Case Combines New Holland Combines John Deere Combines Lexion Combines Agco Combines PARTS CATALOG Form 147071 Issue 09/06 Sugg. Retail: $10.00

More information

CA20 Combine Adapter. PARTS CATALOG $15 Part # Rev. E $15

CA20 Combine Adapter. PARTS CATALOG $15 Part # Rev. E $15 CA20 Combine Adapter PARTS CATALOG $15 Part #169011 Rev. E $15 MacDon Model CA20 Combine Adapter Model CA20 Combine Adapter PARTS CATALOG 1 CONTENTS PAGE Base Adapter Frame & Components... 4, 5 Feed Deck

More information

V H Westview Drive - Rock Valley, Iowa MFG, INC. ROCK VALLEY, IA POLYTIN

V H Westview Drive - Rock Valley, Iowa MFG, INC. ROCK VALLEY, IA POLYTIN V H MFG, INC. ROCK VALLEY, IA 888-765-9846 www.polytin.com POLYTIN 204 Westview Drive - Rock Valley, Iowa 51247 888-765-9846 www.polytin.com Auger Troughs Augers Axle Extension Kits Complete Row Units

More information

Model 973 COMBINE HEADER Model 974 FLEX DRAPER COMBINE HEADER

Model 973 COMBINE HEADER Model 974 FLEX DRAPER COMBINE HEADER Model 973 COMBINE HEADER Model 974 FLEX DRAPER COMBINE HEADER PARTS CATALOG Form 147086 Issue 01/07 Sugg. Retail: $15.00 Inside Front Cover (blank) Model 973/974 Header PARTS CATALOG 1 CONTENTS Main Frame,

More information

Twin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...

Twin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)... Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised

More information

Main Frame (1,676 MM (5-1/2 FT.) Hay Pickup)

Main Frame (1,676 MM (5-1/2 FT.) Hay Pickup) Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM

More information

PARTS BOOKS INSTRUCTIONS

PARTS BOOKS INSTRUCTIONS PARTS BOOKS INSTRUCTIONS To Use DRACO Equipment Parts Books Follow the instructions listed below: From The Main Index Page: Click on the PARTS TAB on the top of the page: Open parts books for your particular

More information

HAMMER KNIFE FLAIL MOWER SHREDDER

HAMMER KNIFE FLAIL MOWER SHREDDER HAMMER KNIFE FLAIL MOWER SHREDDER Operation, Service, & Parts Manual For Models: GOF69, 79, 89, 98, & 108 February 2006 Rev. 2009 FORM: GOFMower.QXD TABLE OF CONTENTS Installation....................................................1

More information

Index PICK-UP REEL PARTS. Hart Carter ML Reel Bats & Attaching Parts Universal Profiteer Reel Parts... 14

Index PICK-UP REEL PARTS. Hart Carter ML Reel Bats & Attaching Parts Universal Profiteer Reel Parts... 14 Index Hart Carter ML Reel Bats & Attaching Parts... 5 Hart Carter ML Reel Parts 5 bat...4 6 bat...5 Universal Profiteer Reel Parts... 14 Universal Series I Reel Parts... 15 Universal Series II Reel Parts...16-17

More information

MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)

MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70

More information

MODEL SUPER P Parts List

MODEL SUPER P Parts List MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway

More information

AWS PARTS BOOK Combine Mount Models

AWS PARTS BOOK Combine Mount Models AWS PARTS BOOK Combine Mount Models Version 120822 TABLE OF CONTENTS PARTS ORDER INFORMATION... 3 COMBINE MOUNT FAN COMPONENTS... 4 ALL MODELS: BLOWER ASSEMBLY... 5 ROTARY SCREEN ASSEMBLY... 6 THROTTLE

More information

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59

BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59 BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: 0 Griffin Ave. Selma, AL 0 () () 00 Parts Ordering 00 0 Fax 00 www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL October, 0 0

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

EUROPEAN REAR ENGINE RIDER SERIES 20

EUROPEAN REAR ENGINE RIDER SERIES 20 Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,

More information

ARCHIVE BOOK - II AG20-IV / AG14-IV ROTARY FLEX WING MOWER

ARCHIVE BOOK - II AG20-IV / AG14-IV ROTARY FLEX WING MOWER AG0-IV / AG-IV ROTARY FLEX WING MOWER ARCHIVE BOOK - II By Serial Number / Production Book = Apr. 99 s/n AG0-0300 Jun. 00 AG0-IV Model - 0' Flex Wing Rotary AG-IV Model - ' Flex Wing Rotary COMPLETE PARTS

More information

1 KW-880 Parts Manual

1 KW-880 Parts Manual Headstock... 2 Hitch Beam... 4 Central Gearbox... 6 Central Gearbox... 8 Intermediate Beam... 10 Intermediate Beam... 12 Intermediate Beam Outside... 14 Intermediate Beam Outside... 16 Outer Support Tube...

More information

PIÈCES DÉTACHÉES ELT125D33 1KV. Tondeuse autoportée

PIÈCES DÉTACHÉES ELT125D33 1KV. Tondeuse autoportée PIÈCES DÉTACHÉES Tondeuse autoportée ELT15D33 1KV Yvan Béal - 1, av. de l Agriculture - B.P. 16 Z.I. du Brézet - 63014 Clermont-Ferrand Cedex Tél : 04 73 91 93 51 - Télécopie : 04 73 90 3 11 www.yvanbeal.fr

More information

FLAGSHIP combines. flagship combines. track kits

FLAGSHIP combines. flagship combines. track kits FLAGSHIP combines 7010 / 8010 / 7120 / 8120 / 9120 series track kits TRACK KITS Application: 7010-9120 Axial-Flow Combines Product Features & Comparisons to Competition Up to 20 mph travel speeds lower

More information

1 RS-300/D 320/D 340/D 350H Parts Manual

1 RS-300/D 320/D 340/D 350H Parts Manual 300/D 320/D 340/D 350H Parts Manual Table Of Contents Three Point Hitch / Hitch Frame Assembly... 3 Tongue Pull Hitch Assembly... 7 Main Gearbox... 11 Crank Handle & Gear... 13 Hydraulic Lift... 15 Rotor

More information

Loader Backhoe Front Axle Parts 2WD & 4WD

Loader Backhoe Front Axle Parts 2WD & 4WD Loader Backhoe Front Axle Parts 2WD & 4WD SECTION G LOADER BACKHOE FRONT AXLE PARTS CASE 2WD AXLE PARTS G2 - G5 CARRARO APPLICATIONS G6 - G25 FRONT AXLE KITS G23 - G25 CASE POWER STEERING VALVES & PUMPS

More information

1 KS-46 T Parts Manual. Table Of Contents

1 KS-46 T Parts Manual. Table Of Contents KS-46 T Parts Manual Table Of Contents Drawbar - Serial No. 585400-606253... 2 Drawbar - Serial No. 606254-... 4 Optional Front Support Wheel - Serial No. 606254-... 6 Main Frame... 8 Rotor...10 Rotor...12

More information

560 and 680 Parts Manual

560 and 680 Parts Manual 560 and 680 Parts Manual There have been four series of drive mechanism on the 560 &680 model Farm Aid TMR mixers. Series I has different front drive between the 680 and the 560. The drive in the rear

More information

PULL-TYPE FORAGE EQUIPMENT DESCRIPTION REVISION NUMBER. Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/ FP240 09/01/16 5-6

PULL-TYPE FORAGE EQUIPMENT DESCRIPTION REVISION NUMBER. Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/ FP240 09/01/16 5-6 PULL-TYPE FORAGE LATEST PAGE EQUIPMENT DESCRIPTION REVISION NUMBER Index 09/01/16 1 PULL-TYPE FORAGE HARVESTERS FP230 09/01/16 2-4 FP240 09/01/16 5-6 HAY PICKUP HEADERS 890-W 09/01/16 7 27-P 09/01/16 8

More information

AWS PARTS BOOK Case 2020 Series Header Mount Models

AWS PARTS BOOK Case 2020 Series Header Mount Models Parts Order Information AWS PARTS BOOK Case 2020 Series Header Mount Models Contact Info: TEMP Farm Equipment Ltd. 3890 Wellington St. Box 269 Mitchell, Ontario, Canada N0K-N0 Phone: -877-348-0066 or 59-348-0066

More information

1 MTD Dash Panel Support Brkt. 2 MTD Dash Panel 3 MTD Hex Bolt 5/16-18 x.75" Lg.* 4 MTD Bulb 5 MTD Hex AB-Tap

1 MTD Dash Panel Support Brkt. 2 MTD Dash Panel 3 MTD Hex Bolt 5/16-18 x.75 Lg.* 4 MTD Bulb 5 MTD Hex AB-Tap 1 MTD 16655 Dash Panel Support Brkt. 2 MTD 16656 Dash Panel 3 MTD 710-0118 Hex Bolt 5/16-18 x.75" Lg.* 4 MTD 725-0963 Bulb 5 MTD 710-0776 Hex AB-Tap Scr. 1/4 x.62" 6 MTD 725-1058 Socket 7 MTD 712-0267

More information

Champion Series Zero-Turn Riders & Mower Decks

Champion Series Zero-Turn Riders & Mower Decks Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP

More information

1 KW-550T Parts Manual. Table Of Contents

1 KW-550T Parts Manual. Table Of Contents KW-550T Parts Manual Table Of Contents Drawbar... 2 Central Gearbox - Serial No. 523800-554988... 4 Central Gearbox - Serial No. 523800-554988... 6 Central Gearbox - Serial No. 554989-... 8 Central Gearbox

More information

210, 220, 230 and 240 Series 2 Speed Single Axles Catalog PB-92126

210, 220, 230 and 240 Series 2 Speed Single Axles Catalog PB-92126 Revised 11/02 210, 220, 230 and 240 Series 2 Speed Single Axles Catalog PB-92126 Strength Power Speed Agility MERITOR PARTS. RIGHT FROM THE START. HOW TO USE THIS CATALOG There are four basic carriers

More information

SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS COMMUNITY FOLDER

SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS COMMUNITY FOLDER SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS (Click on the name to be taken to that section) Stocking Manufacturer of Quality Replacement Parts (815) 965-0884 Fax (815)965-1049 Welcome to the Quality

More information

PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A

PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag

More information

Reel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334)

Reel Mower TRM Parts Manual. Locke Turf 307 Highway 52E, Opp, Alabama 36467, (334) Reel Mower TRM-0 Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing

More information

ADI-2 2-ROW DIGGER / INVERTER

ADI-2 2-ROW DIGGER / INVERTER ADI- -ROW DIGGER / INVERTER CAT6 st Edition Beginning Serial No: 0000 Owner's Name Dealer's Name Serial Number Date Purchased Model No. TABLE OF CONTENTS CAT6 st Edition July, 0 ADI - -Row Digger/Inverter

More information

PARTS MANUAL SECTION 94

PARTS MANUAL SECTION 94 DISC MOWER Published 06/12 HMG7, HMG8, HMG9, HMG10 Disc Mower PARTS MANUAL SECTION 94 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation

More information

ALUMINUM & STEEL CAR CARRIERS

ALUMINUM & STEEL CAR CARRIERS OWNER'S MANUAL ALUMINUM & STEEL CAR CARRIERS INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural

More information

SECTION 12: ILLUSTRATED PARTS LIST

SECTION 12: ILLUSTRATED PARTS LIST SECTION : ILLUSTRTED S LIST (for choke) (for throttle) 0 0-0 Screw, #- x.0 0-0 Screw, /- x.0 0-0 Screw, /- x.0 0- Screw, #0- x. 0- Socket Cap Screw, /- x. 0- Self-tapping Screw, /- x. -00 Flange Lock Nut,

More information

AG96 ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production COMPLETE PARTS LISTING. ALAMO INDUSTRIAL 1502 E. Walnut

AG96 ARCHIVE BOOK ROTARY MOWER. By Serial Number / Production COMPLETE PARTS LISTING. ALAMO INDUSTRIAL 1502 E. Walnut AG ROTARY MOWER ARCHIVE BOOK By Serial Number / Production June June 00 () AG Model - " Cut Rotary Pull Type, Centered Pull, Std. Offset Pull, Option Lift Type, PT Centered, Std. PT Offset, Option Hyd.

More information

Hydrostatic Zero-Turn Commercial Riding Mower

Hydrostatic Zero-Turn Commercial Riding Mower Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter

More information

Table of Contents QUICK REFERENCE GUIDE FOR 52K21Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 52K21Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... 5 2 K 2 1 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 52K21Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS...E - 1 CONTROL COMPONENTS

More information

TEREX Woodsman 730 BRUSH CHIPPER

TEREX Woodsman 730 BRUSH CHIPPER Woodsman 730 BRUSH CHIPPER Parts Manual Customer Dealer S/N Frame # Date Woodsman 150 Commerce Drive, Farwell MI 486 Phone: (800) 953-553 Fax: (989) 588-487 Flipper Discharge Chute Hand Crank Belt Shield

More information

FEATURED CORNHEAD ITEMS! Rubber Ear Savers Gathering Chains

FEATURED CORNHEAD ITEMS! Rubber Ear Savers Gathering Chains Combine New & Featured Items Grain Tester Specifications: Fill Technique: Scoop or fast fill from auger Repeatability: +/-.5% Depending on grain (normal stored grain) Grain Temperature Compensation: Automatic

More information

Table of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS...

Table of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... 4 8 K 1 9 Z PARTS MANUAL Table of Contents QUICK REFERENCE GUIDE FOR 48K19Z...A - 1 DECK COMPONENTS...B - 1 DECK LIFT COMPONENTS...C - 1 FRAME COMPONENTS... D - 1 DRIVE COMPONENTS...E - 1 CONTROL COMPONENTS

More information

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.

Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine. Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,

More information

PRODUCT INFORMATION PRODUCT INFORMATION

PRODUCT INFORMATION PRODUCT INFORMATION PRODUCT INFORMATION PRODUCT INFORMATION Grain Harvesting Axial-Flow 2013 Combine and Header Compatibility Guide This is a Sales Education document not to be used for advertising. Book: Grain Harvesting

More information

Rotary Cutter RCR P Parts Manual. Copyright 2017 Printed 07/14/17

Rotary Cutter RCR P Parts Manual. Copyright 2017 Printed 07/14/17 Rotary Cutter RCR1884 24584 312-880P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life

More information

530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B

530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 2 27602311 1 HARNESS, WIRE, Front 3 27602221 1 HARNESS, WIRE, Rear (530B) 4 27602202 2 LIGHT ASSY., Red 5

More information

SA Swingaway Auger. Parts List. 431 Gosport Street Moree Phone Fax

SA Swingaway Auger. Parts List. 431 Gosport Street Moree Phone Fax SA Swingaway Auger Parts List 431 Gosport Street Moree Phone 02 67521511 Fax 02 67524685 email - andrew@grainland.com.au www.grainland.com.au SWING AWAY AUGER 1061/1071 TUBE COMPONENTS... F2 1081/1371/1381

More information

Assembly Instructions. General Information. Installation Instructions. 12, 15 and 20 Series Drill Small Seeds Option. Used with:

Assembly Instructions. General Information. Installation Instructions. 12, 15 and 20 Series Drill Small Seeds Option. Used with: Installation Instructions! Used with: 1200, 1210 and 1220 Drills 1500, 1510 and 1520 Drills 2000, 2010 and 2020 Drills 12, 15 and 20 Series Drill Small Seeds Option When you see this symbol, the subsequent

More information

Models E640F, E660F, E6C0F & E660G

Models E640F, E660F, E6C0F & E660G Models E0F, E0F, EC0F & E0G 0 0 0 0 0-0 Lock Jam Nut /- -0 Flat Idler -B Auger Idler Arm 0-0A Hex Cap Screw /- x.0-0 Shoulder Screw -0 Flat Washer,. x. x.0-0 Extension Spring -0 Hex Nut /- -00 Hex Nut

More information

Please read the operator manual carefully and make sure you understand the instructions before using the machine.

Please read the operator manual carefully and make sure you understand the instructions before using the machine. 967327801-00 Parts Zero Manual Turn Mower Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service

More information

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14

PARTS MANUAL SECTION 105 FLEX WING ROTARY CUTTER. Published 09/14 8 FLEX WING ROTARY CUTTER Published 09/ PARTS MANUAL SECTION 0 An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and must

More information

Parts Catalog. WYZ48/ 52/60 Zero Turn Mower. Worldlawn Power Equipment, Inc Ashland Avenue, Beatrice, NE Toll Free Number:

Parts Catalog. WYZ48/ 52/60 Zero Turn Mower. Worldlawn Power Equipment, Inc Ashland Avenue, Beatrice, NE Toll Free Number: Parts Catalog R WYZ48/ 52/60 Zero Turn Mower Worldlawn Power Equipment, Inc. 2415 Ashland Avenue, Beatrice, NE 68310 Toll Free Number: 1-800-267-4255 Content Content Mower Assembly.. 1 Mower Deck Assembly.

More information

PARTS CATALOG FOR. Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS

PARTS CATALOG FOR. Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS PARTS CATALOG FOR Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center MH System 9960 9965 & 9970 JD47601 JD47651 82-90

More information

BEFCO. Parts Manual CYCLONE FLEX. Gang Grooming Mower 312-FLX, 315-FLX & 317-FLX. Manual B October 2008

BEFCO. Parts Manual CYCLONE FLEX. Gang Grooming Mower 312-FLX, 315-FLX & 317-FLX. Manual B October 2008 BEFCO Parts Manual CYCLONE FLEX Gang Grooming Mower -FLX, 5-FLX & 7-FLX Manual 90-07B October 00 BEFCO PM, 5, 7-FLX (US) Printed on October, 00 Parts Manual /007 FLX-, 5, 7 Ver. L FLEX, 5 & 7 MAIN FRAME

More information

3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT

3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT FRAME 5" x 5" Mounted Toolbar The 5x5 mounted rigid toolbar frame comes in the following

More information

Dodge Light Duty Axle Applications. X510-5 September, Supersedes X510-5DSD dated January 1999

Dodge Light Duty Axle Applications. X510-5 September, Supersedes X510-5DSD dated January 1999 Dodge 1999-2001 Light Duty Axle Applications X510-5 September, 2001 Supersedes X510-5DSD dated January 1999 SAFETY INFORMATION WARNING - Failure to follow these instructions could affect vehicle performance

More information

One Step Ahead Rod Cutter (Front Mount Unit)

One Step Ahead Rod Cutter (Front Mount Unit) One Step Ahead Rod Cutter (Front Mount Unit) Pickup Head Gear System (LH End View) Section 6 Model Years 1992 1998... 2-3 Model Years 1998 1999 (1 PUH Bearing)... 4-6 Model Years 1998 2012 (1 1/4 PUH Bearing)...

More information

CT FARM & COUNTRY OVER 80 YEARS OF KEEPING YOU IN THE FIELD KINZE PLANTER PARTS

CT FARM & COUNTRY OVER 80 YEARS OF KEEPING YOU IN THE FIELD KINZE PLANTER PARTS CT FARM & COUNTRY OVER 80 YEARS OF KEEPING YOU IN THE FIELD PLANTER PARTS PROMOTION Source Code: CT17PP01. Expires 02/15/2017. SAVE 20% ON EVERYTHING! s listed already include 20% discount and will not

More information

CHIPPER/SHREDDER SERIES

CHIPPER/SHREDDER SERIES Parts Manual CHIPPER/SHREDDER SERIES SIMPLICITY MODELS Mfg. No. Description 1692201 2/10, 2C Chipper/Shredder (Electric Motor) 1692202 3/10 Chipper/Shredder (Electric Motor) 1692203 5C Chipper/Shredder

More information

Parts Manual SERIES CVT Lawn Tractor. Model LT1040 CUB CADET LLC, P.O. BOX CLEVELAND, OHIO PRINTED IN U.S.A.

Parts Manual SERIES CVT Lawn Tractor. Model LT1040 CUB CADET LLC, P.O. BOX CLEVELAND, OHIO PRINTED IN U.S.A. Parts Manual CVT Lawn Tractor SERIES 000 Model LT00 PRINTED IN U.S.A. CUB CADET LLC, P.O. BOX CLEVELAND, OHIO -00 FORM -00C.fm (//00) SERIES 000 CVT LAWN TRACTORS TABLE OF CONTENTS DESCRIPTION PAGE Axle,

More information

FIGURE 1-1. CAB Operator Station. OCT/ D-1-1, Page 1

FIGURE 1-1. CAB Operator Station. OCT/ D-1-1, Page 1 FIGURE 1-1. CAB Operator Station OCT/2008 76D-1-1, Page 1 FIGURE 1-2. CAB Cab Accessories OCT/2008 (96760238) 76D-1-2, Page 1 FIGURE 1-4. OPERATOR STATION Cab Doors and Windows S/N 760163 and Above MAY/04

More information

Reel Mower TRM 5138 and TRM 7192

Reel Mower TRM 5138 and TRM 7192 Reel Mower TRM and TRM Parts Manual Locke Turf 0 Highway E, Opp, Alabama () -00 General Information Mower Layout Please note that Left and Right are determined by standing at eh rear of the mower and facing

More information

iqpc912 PARTS MANUAL PC912PM v1

iqpc912 PARTS MANUAL PC912PM v1 iqpc912 PARTS MANUAL PC912PM v1 See Page 10 See Page 6 & See Page 12 See Page 2 See Page 16 See Page 1 See Page 1 See Page See Page 22 See Page 20 See Page 2 See Page 26 3 16 19 1 17 1 1 11 13 12 10 9

More information

EURO REEL

EURO REEL Date Purchased Machine Serial No. Options The key number system in this parts book is arranged as follows: Please order parts by number - Key numbers with two circles denotes main assemblies. - Key numbers

More information

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber

XL12 Chain Saw UT Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-

More information

WYZ34FS600VCA FOR SERIAL NUMBERS U02011 AND ABOVE

WYZ34FS600VCA FOR SERIAL NUMBERS U02011 AND ABOVE PARTS MANUAL WYZ34FS600V WYZ34FS600VCA FOR SERIAL NUMBERS 201610U02011 AND ABOVE 2 3 4 CONTENTS GENERAL INFORMATION... 6 SERVICE LOCATOR CHART... 7 DECK ASSEMBLY... 8 DECK LIFT ASSEMBLY... 10 FRAME ASSEMBLY...

More information

Parts Catalog. Commercial / Residential 28 Mower

Parts Catalog. Commercial / Residential 28 Mower Parts Catalog R Commercial / Residential 28 Mower Worldlawn Power Equipment, Inc. 422 Turnbull Canyon Road City of Industry CA 91744 Toll Free Number:1-866-9-Mowers(1-866-966-9377) CONTENT CONTENT Mower

More information

Two-Stage Snow Blower For 4WD Pick Up Trucks. Operator s Manual

Two-Stage Snow Blower For 4WD Pick Up Trucks. Operator s Manual Two-Stage Snow Blower For 4WD Pick Up Trucks Operator s Manual Distrubuted by: Metal Fabricating LLC P.O. Box 831 Brodheadsville, PA 18322 Phone: 570-992-9989 SnowVac.com WARRANTY POLICY Metal Fabricating

More information

Made in Italy. General catalogue Europe

Made in Italy. General catalogue Europe Made in Italy General catalogue Europe Main Index Maizestorm Sunstorm rows Sunstorm pans Soystorm Pick-up Trailers 4 10 16 22 26 30 4 / nardi 5 / nardi Maizestorm corn header 6 / nardi 7 / nardi CORN HARVESTING

More information

Model 1550 Series In-Row Ripper Parts Manual

Model 1550 Series In-Row Ripper Parts Manual Model 1550 Series In-Row Ripper Parts Manual LANDOLL CORPORATION 1900 North Street Marysville, Kansas 66508 (785) 562-5381 800-428-5655 ~ WWW.LANDOLL.COM F-299-0111 01/2011 Table of Contents 1 Instructions

More information

New Holland TR MAV Complete Chopper Installation Guide

New Holland TR MAV Complete Chopper Installation Guide TM New Holland TR MAV - 100 Complete Chopper Installation Guide CH003-01_SEP_2014 ROTOR BLADE A IMPORTANT! The paddle blades, located on the balance rings inside the chopper, must be installed in the direction

More information

O P E R A T O R ' S M A N U A L

O P E R A T O R ' S M A N U A L O P E R A T O R ' S M A N U A L TEDDER TD47 PQ990107 (07/0/1) To the Owner; Thank-You for choosing a quality product from Frontier Equipment. We strive to give you the best equipment and the best level

More information

MID MOUNT Z-RIDER ZERO TURNING HYDRO DRIVE NZMJ SERIES 1 & 2

MID MOUNT Z-RIDER ZERO TURNING HYDRO DRIVE NZMJ SERIES 1 & 2 Parts Manual for ZERO TURNING HYDRO DRIVE NZMJ SERIES 1 & 2 MODEL NZMJ23521KH NZMJ23522KH NZMJ25611KH NZMJ25612KH McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED.

More information

FLIGHT CHAIN CONVEYOR

FLIGHT CHAIN CONVEYOR 8- FLIGHT CHAIN CONVEYOR 5th Edition CAT5 Beginning Serial No. 5000 Revised April 7, 06 Owner's Name Dealer's Name Serial Number Date Purchased Model No. TABLE OF CONTENTS 8- FLIGHT CHAIN CONVEYOR CAT5

More information

JOHN DEERE 90/40 SERIES

JOHN DEERE 90/40 SERIES ROW 6 ON 8 ROW HEAD QD2 STALK STOMPER PARTS LISTING/ASSEMBLY INSTRUCTIONS 2. 2.7 5 4 3 2.6 2.8 2. 2.9 2.5 2.3 2.2 2.2 2.4 2.0 NOTES: Install Self-Tapping Grease Fitting into end of Pivot Bolt Torque grease

More information

WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00

WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00 EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices

More information

Power Max 1028 LXE Snowthrower

Power Max 1028 LXE Snowthrower Form Number 3360-746 Rev B Power Max 1028 LXE Snowthrower Model No. 38640-290000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity,

More information

HYDRA-RAM 490 VINEYARD MANURE SPREADER

HYDRA-RAM 490 VINEYARD MANURE SPREADER PARTS CATALOG HYDRA-RAM 490 VINEYARD MANURE SPREADER Pik Rite, Inc 60 Pik Rite Lane Lewisburg, PA 17837 Ph. 800-326-9763 Fx. 570-523-8175 www.pikrite.com January 2014 2 HYDRA-RAM 490 VINEYARD MANURE SPREADER

More information

LARGE FRAME REAR TINE TILLERS SERIES 2

LARGE FRAME REAR TINE TILLERS SERIES 2 Parts Manual for LARGE FRAME REAR TINE TILLERS SERIES 2 MODEL R5002B R5002R R8002B R8002BE RT5 RT5X RT8 RT8S McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision

More information

PARTS MANUAL CASE IH. Manual P/N Rev Companion to P/N SN Range: Current

PARTS MANUAL CASE IH. Manual P/N Rev Companion to P/N SN Range: Current PARTS MANUAL CASE IH 1010 1020 Manual P/N 12086 Rev. 062008 Companion to P/N 12069 SN Range: 709608-Current HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER E-MAIL INTERNET Crary Industries 237 12th

More information

MK-5000G exploded VieW

MK-5000G exploded VieW Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket

More information

DURO MANUFACTURING, INC Arrowhead Drive Carson City, Nevada (775) FAX: (775)

DURO MANUFACTURING, INC Arrowhead Drive Carson City, Nevada (775) FAX: (775) DURO MANUFACTURING, INC. 3505 Arrowhead Drive Carson City, Nevada 89706 (775) 687-8866 FAX: (775) 687-8877 PART SA-01 SA-02 SA-03 SA-05 SA-06 SA-07 SA-08 SA-09 SA-10 SA-11 SA-12 SA-13 SA-14 SA-15 SA-16

More information

STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS

STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076

More information

XH1500/XH1000 S2 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO

XH1500/XH1000 S2 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO Published: 0/0 XH00/XH000 S ROTARY CUTTERS S/N C00 C0 inclusive PARTS MANUAL C0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this Parts

More information

RZ3016. Parts Manual. Zero Turn Mower /

RZ3016. Parts Manual. Zero Turn Mower / Parts Manual RZ30 Zero Turn Mower / 966612302-04 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in

More information

Prodigy Parts Manual Part No

Prodigy Parts Manual Part No Prodigy Parts Manual Part No. 999-88.02 Table of Contents Parts List and Illustrations Page Number Kits and Routine Maintenance Parts Table...iv Hydraulic Component Location... 1 Engine and Hydraulic Pump

More information

I Illustrated Parts List CRT B. Tiller. Repair Parts Manual

I Illustrated Parts List CRT B. Tiller. Repair Parts Manual Illustrated Parts List 15-12 I502012 CRT 1 54001152B Repair Parts Manual Tiller HANDLE ASSEMBLY 1 711100 Screw, Pan Hd. #10-24 UNC 2 53212656 Panel, Control 3 532104164 Tie, Cable 4 53212477 Grip, Handle

More information

SKU Product Name Price American Underslung

SKU Product Name Price American Underslung Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com SKU Product Name Price American Underslung MISC-0355

More information

Boxer 120 Parts Manual

Boxer 120 Parts Manual BIG POWER IN ALL PLACES Boxer Parts Manual Serial No.s 4 & Higher Part No. 45- Phone: Sales - 00--004, Parts and Service - 00-55-9 www.boxerequipment.com Morbark, Inc. 50 S. Winn Rd., P.O. Box 00, Winn,

More information

Parts List Wright Stander Rapid-Hite Mower (For Serial Numbers and Higher Until Superseded)

Parts List Wright Stander Rapid-Hite Mower (For Serial Numbers and Higher Until Superseded) Parts List Wright Stander Rapid-Hite Mower (For Serial Numbers 33615 and Higher Until Superseded) Replace with newer revisions as they become available 2007 Wright Manufacturing, Inc. All rights reserved

More information

5000 Series Covering Systems Installation Instructions

5000 Series Covering Systems Installation Instructions ENTERPRISES Donovan R a I s e T h e S t a n d a r d 5000 Series Covering Systems Installation Instructions The following hardware is universal to all kits: Bent arm extension (L) 1 905 Hose clamp 1 ½ 4

More information

MAGNA AMERICAN MAGNA/GENERAL POWER PARTS INTERCHANGE

MAGNA AMERICAN MAGNA/GENERAL POWER PARTS INTERCHANGE General Power Equipment Co. Service Department 201 E. Brink St. Harvard, Illinois 60033 815/943-7421 MAGNA AMERICAN Effective March 15, 1986 MAGNA/GENERAL POWER PARTS INTERCHANGE The following interchange

More information

ALL PRODUCT INDEX RCK60B-22BX

ALL PRODUCT INDEX RCK60B-22BX ALL PRODUCT INDEX RCK60B-22BX UNIVERSAL JOINT GEAR BOX/PULLEY/BLADE MOWER DECK/WHEEL LINKAGE/LIFT ARM ACCESSORIES Ref. RCK60B-22BX Page 65160 Item Part No. Description Book UNIVERSAL JOINT 01A001 UNIVERSAL

More information

WESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS

WESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS WESTWOOD GARDEN TRACTORS 1983 PARTS CATALOGUE CONTENTS PAGE No. W6R, W6E, W8E/28, W8C UPPER FRAME, BONNET & GRILLE, CONSOLE, ELECTRICAL, SEAT, STEERING WHEEL, ROAD WHEELS 2 3 W8E, W11C, W11E UPPER FRAME,

More information

Parts Manual Zero Turn Mower / Z 248F

Parts Manual Zero Turn Mower / Z 248F Parts Manual Zero Turn Mower / Z 248F 967262501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support

More information

Draper Platform Adaptation Bundle

Draper Platform Adaptation Bundle Draper Platform Adaptation Bundle 7050-Series Self-Propelled Forage Harvester 900D-Series Draper Platform RC042050 Operator s Manual Includes installation, operating, adjustment, technical, repair parts

More information

Super XL 925 Chain Saw UT Page 1 of 15 Carburetor Chamber

Super XL 925 Chain Saw UT Page 1 of 15 Carburetor Chamber Super XL 925 Chain Saw UT-10415 Page 1 of 15 Carburetor Chamber Super XL 925 Chain Saw UT-10415 Page 2 of 15 Carburetor Chamber 1 63370A 1 RETAINER- Reed valve 2 63166A 4 VALVE- Reed 3 63371B 1 SEAT- Reed

More information

ILLUSTRATED PARTS LIST AND TECHNICAL MANUAL

ILLUSTRATED PARTS LIST AND TECHNICAL MANUAL Chariot / Chariot LX TCU705 H ILLUSTRATED PARTS LIST AND TECHNICAL MANUAL c WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects

More information