Meritor Axle & Brake Parts List. LM and LMC Series Axles including Disc and Drum Brake variants

Size: px

Start display at page:

Download "Meritor Axle & Brake Parts List. LM and LMC Series Axles including Disc and Drum Brake variants"

Doreen Greene
6 years ago
Views:

1 Meritor Axle & Brake Parts List LM and LMC Series Axles including Disc and Drum Brake variants

2 LM Parts List

3 LM Parts List LM Hub Assembly Parts List Item Description Part Number 1 Screw, Hub Cap Hub Cap Hub Cap Hubodometer Gasket, Hub Cap Screw, Pinch Nut Pinch Nut Retaining Clip Retaining Washer Bearings Oil Seal A 11 Hub Assembly Brake Drum V 13 Wheel Nut see table below 14 Wheel Bolt, Steel Wheel Wheel Bolt, Aluminium Wheel Wheel Bolt, Universal Steel/Aluminium, Coated, (use with Dacromet Wheel Nut) Filler Plate for axles manufactured before April Filler Plate for axles manufactured after April Nut, Filler Plate Dust Cover Screw, Dust Cover Plug, Blanking Plug, Inspection g Cartridge MERITOR Hub Grease (not shown) g Tube Optimol Optimoly White Paste T (not shown) WHEEL NUTS 32mm ACROSS FLATS NEW PART NUMBER REPLACES EXISTING NUMBERS TYPE FINISH COATING / STANDARD OPEN PHOSPHATE & OIL / STANDARD OPEN DACROMET 00 & OIL / CLOSED END PHOSPHATE & OIL N/A CLOSED END DACROMET 00 & OIL 3

4 LM Parts List

5 LM Parts List LM Brake Assembly Parts List Item Description Part Number 1 Brake Shoe Lined Assembly R 2 Brake Lining, Anchor End R 3 Brake Lining, Cam End R 4 Brake Shoe Assembly, Welded S Rivet Roll Pin Return Spring Retaining Spring Cam Roller Assembly Anchor Pin and Bush Assembly *11 2g Sachet MERITOR Brake Grease (not shown) *Must be used with items 9 and 10. NB. Items 9 and 10 must be used as a matched set, individual components are not interchangeable with old style parts.

6 LM Parts List A A A

7 LM Parts List LM Camshaft Assembly Parts List up to April 2001 Item Description Part Number 1 Camshaft LH/RH See table below 2 Cam Head Bearing Assembly Screw, Bearing Inner Boot, Cam End A Outer Boot, Cam End Tie Wrap Camshaft Bracket A Camshaft Bracket (axles built after Sept 99) Spline End Bearing Assembly Inner Boot, Spline End A Outer Boot, Spline End Washer, Spacing, Thick Washer, Spacing, Thin Retaining Washer Circlip Air Chamber Bracket Assister Spring g Sachet MERITOR Grease (not shown) NB. Item 1 must be used on items 2 & 7. Dimension A Dimension B Dimension A Dimension B Right Hand Part Number Left Hand

8 LM & LMC Service A 3A A

9 LM & LMC Service LM Camshaft Assembly Parts List from April 2001 Item Description Part Number 1 Camshaft LH/RH See table below 2 Cam Head Bearing Assembly A2310Q Screw, Bearing, Cam End A Screw, Bearing, Spline End Washer Seal 1229K479 4A Boot, Cam End 2260K11 Tie Wrap Lip Seal A120S264 7 Washer 1229S4101 Snap Ring 1229T Camshaft Bracket Spline End Bearing Assembly Inner Boot, Spline End A Outer Boot, Spline End Washer, Spacing, Thick Washer, Spacing, Thin Retaining Washer Circlip Air Chamber Bracket Assister Spring *1 2g Sachet MERITOR Grease (not shown) *NB. Item 1 must be used on items 2 & 10. Dimension A Dimension B Dimension A Dimension B Right Hand Part Number Left Hand

10 LM Parts List

11 LM Parts List LM ABS Assembly Parts List Item Description Part Number 1 Pole Wheel Sensor Block Screw, Sensor Block Spring Clip Sensor Strain Relief Bush Cable Tie Grease for Sensor Bush (not shown)

12 LMC Parts List

13 LMC Parts List LMC Hub Assembly Parts List Item Description Part Number 1 Screw, Hub Cap Hub Cap Hub Cap Hubodometer Gasket, Hub Cap Axle End Nut Stake Washer Assembly Auxiliary Oil Seal A Hub Assembly LMC Drum Brake Hub Assembly LMC DX19 Disc Brake For all other axle & brake components refer to the relevant LM or LM DX19 Series Parts Lists. 13

14 LM DX19 Parts List A 17 14

15 LM DX19 Parts List LM DX19 Hub, Rotor and ABS Parts List Item Description Part Number 1 Screw, Hub Cap Hub Cap Hub Cap Hubodometer Gasket, Hub Cap Screw, Pinch Nut Pinch Nut Retaining Clip Retaining Washer Bearings Oil Seal A 11 Hub Assembly Rotor Wheel Nut see table below 14 Wheel Bolt, Steel Wheel Wheel Bolt, Aluminium Wheel Wheel Bolt, Universal Steel/Aluminium Wheel, Coated, (use with Dacromat Wheel Nut) M16 x 6 Rotor Mounting Bolt Hardened Washer Pole Wheel Assembly Sensor Bracket (From June 2000) A Sensor Block (Pre June 2000) Spring Clip Sensor Screw, Sensor Bracket (From June 2000) M16 x 60 Flanged Rotor Mounting Bolt Replaces items 1 & 16 from July WHEEL NUTS 32mm ACROSS FLATS NEW PART NUMBER REPLACES EXISTING NUMBERS TYPE FINISH COATING / STANDARD OPEN PHOSPHATE & OIL / STANDARD OPEN DACROMET 00 & OIL / CLOSED END PHOSPHATE & OIL N/A CLOSED END DACROMET 00 & OIL 1

16 LM DX19 Parts List 1 *See Below Parts List

17 LM DX19 Parts List LM DX19 Brake Assembly Parts List Item Description Part Number 1a Brake Assembly DX19 2 (Service Exchange) SR 1b Brake Assembly DX19 26 (Service Exchange) SR 2 Disc Pad Kit DSB2A** 3 Spring Pad Retaining Pin Split Pin M16 x 4 Caliper Mounting Bolt Hardened Washer Plug Retaining Washer M16 x 4 Flanged Caliper Mounting Bolt Replaces items 6 & 7 from July Stabiliser Bar 2297J6692 ** See LM DX19 Service Kits page 64 * Brake Assembly Rear View 1a 1b 17

18 LM DX19 Parts List 4/4 *IMPORTANT See Note 7a 4/ /40 37/40 1 * Part No.7. MUST BE USED on air chambers with a caged, air off, push rod length of 4/4mm, measured from the mounting face of the chamber to the centre of the clevis pin hole. Later models of brake chamber with 37/40mm pushrod length have a formed front housing and MUST NOT be fitted with the spacer plate 1

19 LM DX19 Parts List LM DX19 Actuation and Air Chambers Parts List Item Description Part Number 1 Lever Boot Clamp Bolt M x Lever 0mm Lever 90mm Nut M Clevis Pin R-Clip Part Number 4/4mm Part Number 37/40mm 7* Spacer Plate None T 24/ T 22/ T 20/ T 1/ T T T T * Part No.7. Must be used on Air Chambers with a caged, air off, push rod length of 4/4mm. It must never be used on chambers with a caged push rod length of 37/40mm. 19

LM DX19 Service Kits Slide Pin Kit All Models DSB7

DSB104 Adjuster Kit (LH) Adjuster Kit (RH) DSBL DSBR

Sleeve & Thrust Plate Kit (RH) DSB6L DSB6R With

Meritor does not recommend the service of the brake

proper function of the brake caliper once fitted by

The above kits have a guarantee that they will fit and

20 LM DX19 Service Kits Slide Pin Kit All Models DSB7 Disc Pad Kit DSB2A Bearing Kit DSB3 Seal & Gasket Kit DSB104 Adjuster Kit (LH) Adjuster Kit (RH) DSBL DSBR Adjuster Sleeve & Thrust Plate Kit (LH) Adjuster Sleeve & Thrust Plate Kit (RH) DSB6L DSB6R With respect to the above kits, except DSB2A disc pad kit. Meritor does not recommend the service of the brake caliper and will not provide any guarantee of the proper function of the brake caliper once fitted by anyone other than a Meritor Operative. The above kits have a guarantee that they will fit and be of our normal quality standard, but will carry no service warranty. Instructions specified in the service manual treat the caliper as a service exchange unit that carries its normal Aftermarket warranty. 20

21 Warranty A comprehensive network of original parts distributors and service stations operate throughout Europe; this is supported internationally with agents strategically placed around the world. All Meritor replacement parts obtained through original parts distributors are covered by a one year warranty. For full warranty terms and conditions see Meritor Warranty Terms and Conditions Publication No Meritor reserve the right to make changes in specifications shown herein or add improvements at any time without notice or obligation. PARTS SHOWN IN THIS SPARES LIST ARE MADE FROM DRAWINGS IN WHICH COPYRIGHT SUBSISTS. THE MAKING OF COPIES OF ANY OF THESE PARTS IS PROHIBITED. Meritor HVS Limited The high quality assurance management systems applied by Meritor are endorsed with the awarding of ISO 9001, Lloyd s Register Quality Assurance. 21

22 ArvinMeritor Inc. World Headquarters 213 West Maple Road Troy, Michigan 404 U.S.A. Telephone: Meritor HVS Limited Commercial Vehicle Systems Rackery Lane, Llay Wrexham LL12 0PB U.K. Telephone: +44 (0) Fax: +44 (0) Meritor HVS (Helmond) B.V. Commercial Vehicle Systems 92 Vossenbeemd, Postbus 2 70 CL, Helmond Holland Telephone: +31 (0) Fax: +31 (0) Meritor HVS (Mitry-Mory) S.A. Commercial Vehicle Systems Z.I. du Moulin à Vent 9 rue des Frères Lumière Mitry-Mory France Telephone: +33 (0) Fax: +33 (0) Meritor HVS (Verona) s.r.l. Commercial Vehicle Systems Via Monte Fiorino, San Giovanni Lupatoto Verona Italy Telephone: Fax: Fax: Meritor HVS (Barcelona) S.A. Commercial Vehicle Systems Ctra. Granollers - Sabadell Km. 13,3 Poligono Argelagues 01 Lliçà de Vall Spain Telephone: +34 (9) Fax: +34 (9) Meritor Automotive (Pty) Limited, Commercial Vehicle Systems 3 Director Road, Spartan Ext 2 PO Box 72, Isando, 1600 R.S.A. Telephone: +27 (0) Fax: +27 (0) For further information contact Meritor HVS Limited Commercial Vehicle Systems Rackery Lane, Llay Wrexham LL12 0PB U.K. Telephone: +44 (0) Fax: +44 (0) Copyright 2001 Meritor Automotive All rights Reserved Publication Descriptions and specifications were in effect at the time of publication and are subject to change without notice or liability. Meritor reserve the right to make design improvements, change or discontinue parts at any time.

Meritor Axle & Brake Parts List. LM and LMC Series Axles including Disc and Drum Brake variants

Meritor Axle & Brake Parts List LM and LMC Series Axles including Disc and Drum Brake variants LM Parts List 14 1 3 10 9 19 20 8 5 6 7 11 1 4 2 18 16 13A 17 15 13 12 2 LM Parts List LM Hub Assembly Parts