Pressure/Vacuum Vents
|
|
- Gabriel Dorsey
- 6 years ago
- Views:
Transcription
1 Pressure/Vacuum Vents Girard 307/312 Vent Assemblies 407/412 Vent Assemblies MC307B Series 3MVB Series DOT407L Series 407MVB Series Fort Vale /312 Vent Assemblies Connections Available 407/412 Vent Assemblies R29 Series 24 Series R407 Series 294
2 307/312 Magnetic Vacuum Breaker 295
3 307/312 Pressure Vent 296
4 307/312 Pressure Vent 297
5 307/312 Pressure Vent 298
6 307/312 Pressure Vent 299
7 407/412 Magnetic Vacuum Breaker 300
8 407/412 Pressure Vent 301
9 Fort Vale 307/312 Pressure Vent Parts Illustration Item Description Part No. Kits 1 Blanking plug SK 2 M6 screw (2) M6 spring washer (2) Cowl Body top 10964/3 6 Pressure spring - 15 PSIG Pressure spring - 25 PSIG Pressure spring - 30 PSIG " grub screw Pillar nut M8 half nut Vacuum spring pad (2) 10986/2 11 Vacuum spring 2" Hg Pressure plate (Viton) 175/0065 Pressure plate (Fortyt) 175/0063 Pressure plate (pressure only) 175/ Viton pressure seal SK Fortyt pressure seal US SK Kalrez pressure seal SK 14 Viton vacuum seal SK Fortyt vacuum seal (hollow) US H SK Kalrez vacuum seal SK 15 Vacuum poppet 10983/P Vacuum poppet (Viton) 10983/V 16 Lug nut (24/) Lug nut seal (24/) 10329TP 18 Adaptor body (24/) 10956/1 Flanged adaptor (26/) 10963/ " BSP weld-in socket (28/) 600/ " BSP adaptor (28/) CNAF/Teflon envelope seal SK Seal Kits: items marked SK included in the following seal Kits: 24/0SK All models Viton / Viton seals 24/1SK All models Fortyt / Fortyt seals 24/7SK All models Kalrez / Kalrez seals Air Charge Kits: 16 US100 US PSIG PSIG Kalrez is a registered DuPont trademark. Please note: Tank Vents must be fitted with a hose wrench. Hammer blows or any similar impact will impair the unit. Tank Vent Flow Rates Part No. Maximum Set Pressure Vacuum Pressure Flow Rate marked on Valve 24/ PSIG 2" Hg 96,000 SCFH at 34.5 PSIG 1750 SCFH at 4" Hg 24/ PSIG 2" Hg SCFH at 39.0 PSIG 1750 SCFH at 4" Hg 24/ PSIG 2" Hg 120,000 SCFH at 44.0 PSIG 1750 SCFH at 2" Hg Fort Vale Incorporated Not to be reproduced in part or in whole without the written permission of Fort Vale Inc. or Fort Vale Engineering Ltd. Fort Vale Incorporated 8560 Katy Freeway, Suite 160, Houston, Texas 77024, U.S.A. Tel Fax ussales@fortvale.com 302
10 Fort Vale 307/312 Vacuum Breaker Vacuum Breaker Relief Vent Description The 3" Super Vac Vent is a Vacuum Relief Vent designed to be mounted directly to the top of the tank. The vent is available in two designs; a swivel type, with air inlet and pressure gauge connection facilities, and a fixed type. Both designs have 3" NPS(L) connections, and a weatherproof cowl fitted as standard. The standard internal vent seals are Fortyt (PTFE-encapsulated silicone). Other seal materials are available on request. Construction The Vent is manufactured in 316 L quality stainless steel and precision machined on the latest CNC machine tools. Welds are fully homogeneous to ASME design requirements. Standard finish is a high commercial quality electropolish or machine finish. See Venting Device Accessories page for Gauge and Ball Valve part numbers. Please note: Vacuum Vents must be fitted with a spanner wrench. Hammer blows or any similar impact may impair the unit. 4.83" DIA (Ø122.7) 1.5" A/F (38.1) Connections Available Connections Available Vent Type Connection Side Tappings 81/100## 3" NPT(F) 81B/100## 3" BSP(F) 83/100## 3" NPT(F) Swivel 3 4" NPT & 1 4" NPT 83B/100## 3" BSP(F) Swivel 3 4" NPT & 1 4" NPT Maximum Design Temperature Swivel Assembly Weight Fixed Assembly Weight 400 F (204 C) 6.5lb (2.95kg) 5lb (2.27kg) 4.83" DIA (Ø122.7) 1.5" A/F (38.1) 3" SUPER VAC VENT 6.47" (164.3) 1/4" NPT CONNECTION 3/4" IPS CONNECTION 3" SUPER VAC VENT 2.74" (69.6) 4.04" (102.6) 3" NPS(L) 4.25" DIA (Ø108.0) 5.75" (146.1) 3" NPS(L) 4.0" DIA (Ø101.6) 5.5" (139.7) 83/ SWIVEL ASSEMBLY 81/ FIXED ASSEMBLY Fort Vale Incorporated Not to be reproduced in part or in whole without the written permission of Fort Vale Inc. or Fort Vale Engineering Ltd. Fort Vale Incorporated 8560 Katy Freeway, Suite 160, Houston, Texas 77024, U.S.A. Tel Fax ussales@fortvale.com 303
11 Fort Vale 407/412 Pressure Vent Parts Illustration Item Description Part No. Kits 1 Blanking plug SK 2 Cap assembly 1760/ Cowl 176/ M6 x 6 socket grub screw (3) Pressure spring - 25 PSIG Pressure spring - 30 PSIG Pressure spring - 36 PSIG Vacuum stem 175/ Spring pad 175/ " split pin Vacuum spring 2" Hg Pressure plate 1760/0065 Pressure plate (Viton) 1760/0066 Pressure plate (Hastelloy) 176H/0060 Pressure plate (pressure only) 1760/ Fortyt 'O' ring US SK Viton 'O' ring SK 12 Vacuum poppet 10983P/2 Vacuum poppet (Viton) 10983V/2 13 Fortyt vacuum seal US H SK Viton vacuum seal SK 14 Body assembly (A29) 1760/0800 Body assembly (B29) 1760/0300 Body assembly (E29) 1760/0305 Body assembly (F29) 1760/0400 Body assembly (L29) 1760/0875P Body assembly (R29) 1760/0760 Body assembly (W29) 1760/ Setting locking grub screw Seal Kits: items marked SK included in the following seal kits: USS29/1SK Fortyt (PTFE encapsulated) seals. USS29/0SK Viton seals. Kalrez seals available on request. Air Charge Kits: US PSIG US PSIG PRESSURE SEAL VACUUM SEAL Alternative pressure and vacuum settings are also available. To achieve the flow rates quoted a minimum of a 3.04" (77.2mm) connection must be used. Kalrez is a registered DuPont trademark. 304
LINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_
LINED EQUIPMENT // 3 45 Footvalve 4 to 3 Hydraulic Footvalve 25mm Ball Valve 50mm Ball Valve 80mm Ball Valve 3" Butterfly Valve MK3 65mm Flanged Relief Valve 80mm Flanged Vacuum Vent Valve Fort Vale Engineering
More informationLINED EQUIPMENT // Fort Vale Engineering Ltd CATALOGUE REVISION_
LINED EQUIPMENT // Fort Vale Engineering Ltd. 2018 CATALOGUE REVISION_03-16..18 LINED EQUIPMENT CATALOGUE // CONTENTS // FOOTVALVES //» 3" PFA Lined Cleanflow Footvalve with 5 Outlet» 3" 5 Halar Lined
More informationAIRLINE EQUIPMENT CATALOGUE //
AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //
More informationHYGIENIC EQUIPMENT CATALOGUE //
HYGIENIC EQUIPMENT CATALOGUE // 5 The Fort Vale Range of Equipment 2 for Food, Brewery & Hygienic Applications 3 THIS PAGE IS INTENTIONALLY BLANK FOOD, BREWERY & HYGIENIC EQUIPMENT // CONTENTS // TOP MOUNTED
More informationmegaflo BSP Pressure Relief Vent
Pressure RELIEF VENTS PRV s SECTION 2 When it comes to pressure/vacuum protection, Girard has been putting their name and reputation on the line every day for close to 60 years. We start with only the
More informationBALL VALVE CATALOGUE //
BALL VALVE CATALOGUE // The Fort Vale Range of Ball Valves CATALOGUE REVISION_01-27.01.1 Fort Vale Engineering Ltd. 201 THIS PAGE IS INTENTIONALLY BLANK BALL VALVE CATALOGUE // CONTENTS // AIRLINE BALL
More informationRAIL TANKER EQUIPMENT CATALOGUE //
RAIL TANKER EQUIPMENT CATALOGUE // CORE COMPONENTS // Fort Vale Engineering Ltd. 08 CATALOGUE REVISION_0-0.03.8 RAIL TANKER EQUIPMENT // CORE COMPONENTS CONTENTS // REFUELLING EQUIPMENT //» 50mm Rail Locomotive
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationCORE SPECIFICATION //
CORE SPECIFICATION // ISO Liquefied Gas Tank Container Equipment REV01_10.12.07 Fort Vale Engineering Ltd. 2009 CORE SPECIFICATION GAS TANK CONTAINER // CONTENTS // PRESSURE RELIEF EQUIPMENT //» 80MM INTERNAL
More informationCORE SPECIFICATION //
CORE SPECIFICATION // 4 Bar ISO Tank Container REV05_27.10.16 Fort Vale Engineering Ltd. 2016 CORE SPECIFICATION ISO TANK CONTAINER // CONTENTS // MANLID EQUIPMENT //» 300mm Ultra Low Profile Pendle Inspection
More informationSECTION TWO - INTERMODAL - VENTING
PEROLO MULTI-SUPERVENTIX SRV KEY PART NUMBER DESCRIPTION 5A PER-11100195 PEROLO SRV SPRING SET, 2.18 BAR 5-6 PER-11100196 PEROLO SRV SPRING SET, 3.75 BAR 5-6 PER-11100197 PEROLO SRV SPRING SET, 4.40 BAR
More informationROAD TANKER EQUIPMENT CATALOGUE //
ROAD TANKER EQUIPMENT CATALOGUE // GENERAL PURPOSE ROAD TANKER Fort Vale Engineering Ltd. 2013 CATALOGUE REVISION_02-10.12.13 THIS PAGE IS INTENTIONALLY BLANK ROAD TANKER EQUIPMENT CATALOGUE // CONTENTS
More informationBUTTERFLY VALVE CATALOGUE //
BUTTERFLY VALVE CATALOGUE // 11 The Fort Vale of s 1 CATALOGUE REVISION_01-.0.0 Fort Vale Engineering Ltd. 20 BUTTERFLY CATALOGUE // CONTENTS // 2 BUTTERFLY VALVES //» 2 CLAMPED WIDDOP BUTTERFLY VALVE
More informationOFFSHORE EQUIPMENT CATALOGUE //
OFFSHORE EQUIPMENT CATALOGUE // CATALOGUE REVISION_06 09.06.14 The Fort Vale Range of Equipment for Offshore Tanks Fort Vale Engineering Ltd. 2014 OFFSHORE CATALOGUE // CONTENTS // MANLID EQUIPMENT //»
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationDM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC
DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under
More informationSpares. U.K. Netherlands U.S.A. Russia China Singapore
FORT VALE ENGINEERING LTD Head Office & Manufacturing Plant Calder Vale Park, Simonstone Lane, Simonstone, Burnley, Lancashire, BB ND. United Kingdom. FORT VALE BV Gieterijstraat 0 AB RIDDERKERK The Netherlands
More informationBall and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical
13560 Larwin Circle, Santa Fe Springs, CA 90670 Phone: (562) 802-2255 (800) 783-7836 Fax: (562) 802-3114 Netsite: www.svf.net E-mail: Sales@SVF.net R8 SERIES ANTI-STATIC API-607-4th EDITION 1/4 6 PROCESS
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationFLOW CONTROLLERS Instrument/Analyzer Products. Catalog 4513/USA April 2003
FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 FLOW CONTROLLERS Instrument/Analyzer Products Catalog 4513/USA April 2003 table of contents SC420 Series............. 1-2 SC423XL
More informationModel 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (Figure ) and Model 5450 (Figure 2) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry. These
More informationModel 5400 / 5450 Control Valve
Model 5400 / 5450 Control Valve The Model 5400 (open yoke) and Model 5450 (closecoupled) control valves are designed to meet the high pressure and erosive applications common to the oil and gas industry.
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationIndex. Butterfly Valves
Dry Bulk - Chemical - Petroleum Dry Bulk - Chemical - Petroleum Nozzles Nozzles & Valves & Index Index Part No. Description Page Nozzles P- 202 Overwing Aircraft Refueling, Bronze 1 P- 2022 Overwing Aircraft
More informationD I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV
TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more
More informationPage Concealed Flush Valve (1976 on)
8T _ Series Concealed Flush Valve (16 on) 2 10 14 11 15 1 8 OSC. HANDLE 16 1 10 14 1 12 15 8 4 1 /8" PUSH BUTTON 16 5/8" PUSH BUTTON 5 " PUSH PLATE OUTLETS See Page 40 18 21 2 22 20 6 FOOT PEDAL REPAIR
More informationInternational Standard Valve, Inc Perimeter Park Drive, Bldg 320, Houston, Texas
- International Standard Valve, Inc. 7111 Perimeter Park Drive, Bldg 320, Houston, Texas 77041 713-983-7600 TM Ball Valve Product Summary is a registered trademark of International Standard Valve, Inc.
More informationValves. Model Code Breakdown. Valves. Steel High Pressure Steel Ball Valves. Steel High Pressure Steel Ball Valves
Steel Ball Steel Ball Model Code Breakdown AB2 N1-1/2 _ 1 1 D B Valve Series Connection Type/Size N NPTF Pipe Thread S SAE Straight Thread Adapter & Stem Seals B Buna - Standard V Viton Bore Restriction
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationfor plastic tubes CONNECTION > Series 6000 super-rapid fittings GENERAL DATA Fitting with connecting tube Sprint
> Series 6000 super-rapid fittings CATALOGUE > Release 8.8 Series 6000 super-rapid fittings for plastic tubes Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3,
More informationRailroad Tank Car Equipment
Railroad Tank Car Equipment AAR Approved Relief Valves for Railroad Tank Cars A8890-Series AAR Approval #PRD-039009 Suitable for use on pressurized railroad tank cars with a variety of liquified gasses
More informationI N S T R U C T I O N M A N U A L
I N S T R U C T I O N M A N U A L M E T E R I N G P U M P S LINC84T-13 Series Chemical Metering Pump Pneumatic Plunger T A B L E O F C O N T E N T S Contents - 84T-13 Pump Manual... Page General Specifications...
More informationANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
More informationFamily of Products 1100 SERIES 1500 SERIES. 3 Piece Full Port Fire Safe Ball Valve ANSI Class WOG
Family of Products 3210 S. Susan St, Santa Ana, CA 92704 Tel (714) 427-0877 Fax (714) 427-6392 www.avcovalve.com 1100 SERIES 3 Piece Full Port Fire Safe, PCTFE, PEEK, 1500 SERIES 3 Piece Full Port Fire
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationAccessories Guide ph/orp/conductivity Sensors
Jet Cleaners and Scrubber Accessories Isolation Ball Valves Assemblies Compression Fittings and Sheath Sets High Pressure (2500 PSIG) Sensor Housings In-line Flow Cells Nut Lock Union Style Adapters Sensor
More informationSpring-assisted, Non-slam, Axial Flow, Silent Check Valves
DFT s family of In-Line Check Valves are available in a variety of designs: Basic-Check Restrictor Check SCV SCV-R Vacuum Breaker DLC BNCTM Excalibur GLC GLC -Cast Iron PDC DSV ALC FBC WLC WLC -Cast Iron
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
More informationPage 1 - Gearbox & Bearing Housing. Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2)
Spare Parts List Hy~Line Contents Page 1 - Gearbox & Bearing Housing Page 2 - Wet End - Rotor Case & Rotors (Part 1) Page 3 - Wet End - Rotor Case & Rotors (Part 2) Page 4 - Ports Page 5 - Single Mechanical
More information413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections
More informationFITTINGS COUPLINGS BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE
BAUER TRAVIS PATTERN CLAW VICTAULIC STRAINERS MUFF STEAM & GROUND JOINTS STORZ QRT CFA MFB & NSW FIRE BRIGADE HOSES PNEUMATICS HOSE REELS RUBBER HYDRAULICS ACCESSORIES & 139 HOSES Bauer Type B Couplings
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More informationWorcester 18/19 Series. Modular Multi-Way Ball Valves
Worcester 18/19 Series Modular Multi-Way Ball Valves The Modular Approach To Flexibility 2 Flowserve Worcester's modular Series 18/19 multi-way valve addresses the need for diverting media through a number
More informationGTV Series High Pressure Control Valves
For primary and secondary shut off of fuel control lines Keeping the World Flowing Contents Section Page Technical Specification 3 ¾" & " 2-Way Poppet Valve 4 ¾" & " 3-Way Poppet Valve 5 /2", 2" & 3" 2-Way
More informationANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
More informationFIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE //
FIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE // FIRESAFE & LETHAL SERVICE BALL VALVES // CONTENTS // FIRESAFE & LETHAL SERVICE BALL VALVES //» 1" Firesafe / Lethal Service Ball Valve» 2" Firesafe / Lethal
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationProducts for the Oil & Gas Industry
Products for the Oil & Gas Industry BuTech a leading brand of high pressure valves, tubing, fittings and accessories, takes a proactive stance on the design, development and production of new and existing
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More information0 900 psi Pressure-Reducing Diaphragm Regulator
Instruction Sheet P/N 009506-09 0 900 psi Pressure-Reducing Diaphragm Regulator Description The Nordson 0 900 psi diaphragm regulator reduces high primary pressures to lower secondary pressures. It is
More informationKleanLine Dry Gas Filters. Technical Bulletin
KleanLine Dry Gas Filters Technical Bulletin 02 Elster Meter Services The Elster KleanLine Dry Gas Filters are designed to remove particles from dry gases without substantial pressure loss and are available
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationPF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
More informationPERFECTION IS OUR STANDARD...
PERFECTION IS OUR STANDARD... WELCOME TO COLSON X-CEL LTD Providing Precision engineering solutions for the most demanding environments Colson X-Cel Ltd is a well established and most highly respected
More informationWelding All assembly welds are full penetration. All welds are crevice and undercut free. Weld finish & detail drawings available upon request.
Single element sanitary liquid housing Designed specifically for the food & beverage and pharmaceutical industries Sanitary triclamp body closure as standard STANDARD product Sanitary surface finish Triclamp
More information88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES
Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 2. Retainer ASTM A108 Type 1215 3. Ball ASTM A108 Type 1215 Chrome Plated 9. Gland Plate 302 or 304 SS 10. Stem Nut 316 SS 11.
More informationSERIES 86 INSTRUMENTATION 3-PIECE TUBE FULL PORT BALL VALVES
SERIES 86 INSTRUMENTATION 3PIECE TUBE FULL PORT BALL VALVES SHARPE SERIES 86 INSTRUMENTATION BALL VALVES STANDARD FEATURES Tube Full Port Design (TFP) 3Piece Design Integral ISO Mounting Pad Lockable Handle
More informationProduct overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
More informationInstallation. Installation. 12. System Diagram... 10
Pressure Control Systems Installation Instructions Form No. F-1031 Section 3010 Issue Date 08/20/96 Rev. Date 9/11/17 Table of Contents Discharge Relief Valve System System Description....................................
More informationSDUH350. Oil Filtration and Coolant Handling Specialists. Removes Contaminants. Extends Oil Life. Reduces Component Wear.
Oil Filtration and Coolant Handling Specialists SDUH350 Removes Contaminants Extends Oil Life Reduces Component Wear Removes all Water Saves Machine Downtime Reduces Oil Disposal Costs Simple to Install
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationFIG. EA PIECE FIRESAFE BALL VALVES
FIG. EA-305 3-PIECE FIRESAFE BALL VALVES AGA-APPROVED MANUAL & AUTOMATIC FIG. EA-305 BALL VALVE FIGURE NUMBERING SYSTEM E A 305 F C X SE BS SW BW FL EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL
More informationItem 305D-CRYOGENIC 3-PC Cryogenic Ball Valve
Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting
More informationSHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES
SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES
More informationExploded view of OS 353CV, 81 x 133 mm Updated
Exploded view of OS 353CV, 81 x 133 mm Updated 11.05.2015 1 2 27 28 50 51 52 A 57 58 L 3 5 6 8 9 10 4 E 7 31 J 38 29 30 32 33 34 53 54 I 55 56 C D 59 60 61 62 63 11 F 12 39 35 36 37 73 13 40 TO INLET 71
More informationSPUR GEAR PRODUCT LINE: CAST IRON PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE. Section 1451 Page 1451.
Page 1451.1 TABLE OF CONTENTS Features & Benefits...2 Typical Applications...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Component
More informationDouble Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003
Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw
More informationBRASS BALL VALVES. CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0.
195 Series Ball Valves BRASS BALL VALVES CSA, UL, cul CGA 9.1 and FM Approved. Female NPT, Male NPT and Flare ends in various configurations from 3/8 to 1.0. Hot forged brass body Blow-out nickel plated
More informationVIKING SG SERIES SEALLESS MAG DRIVE PUMPS
SERIES SG-04, -05, -07, -0, -4 (Cast Iron) Section 34.3 Page 34.3. OPERATING RANGE: SG Pumps (Cast Iron Mag Drive) and SGN (Ductile Iron Mag Drive) Displacements No. 23 SG and 7 SGN 0.06 to 90 (SG) and
More informationTechnical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE
Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85
More informationDIN Hygienic Union & Fittings
DIN 11851 Hygienic Union & 11852 Fittings The DIN 11851 union is widely used throughout Europe and the Middle East and incorporates a round slotted nut and D Section seal, as standard. The union is manufactured
More informationVD SERIES VESSEL & REACTOR VALVES DISC VALVES
VD SERIES VESSEL & REACTOR VALVES DISC VALVES FULL FLOW BOTTOM OUTLET VALVES TANK BOTTOM DISC VALVE CODE: VD4R-VD6R M Ring for high temperature and vacuum. Other sealing systems are available Optional
More informationPhoto: Björn Edlund. Impeller Pumps
Photo: Björn Edlund Impeller Pumps Flexible impeller pumps provide an efficient solution to most raw water pumping needs. The pumps are self-priming and can pass fairly large solids without clogging or
More informationAPPROVAL GUIDE CSA 3.16
APPROVAL GUIDE CSA 3.16 CONTENTS Approval Description 3 Basic Industrial Core Products 76 & 76F Series Certificates 89 Series Certificates 83B & 86B Series Certificates 87A & 88AB Series Certificates 215L/W
More informationAnderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
More informationP R O C E S S V A L V E S. TBV Instrument Valves TBV
TBV Instrument Valves TBV TBV s Process / Instrument Valves were developed in response to concerns expressed by plant engineers. Common problems such as center-to-center spacing in Differential Pressure
More informationModel 4418F. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C Industries strives to earn your business by offering an extensive line of high quality products with a proven track
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationElectric Fuel Pump FPM
INSTRUCTION MANUAL Electric Fuel Pump FPM S1590, Rev B LISTED MOTOR FPM-12, FPM-12/HF, FPM-24, FPM-115, FPM-220 Congratulations on purchase of this World Class Electric Fuel Pump! Pump Outlet Elbow Nozzle
More informationVIKING SG SERIES SINGLE PUMPS (WITH SHAFT SEAL)
SERIES SG-04, -05, -07, -10, -14 () Page 341.1.1 OPERATING RANGE: SERIES SG-04/-05 PUMP SG Pumps (, Lip or Mechanical Sealed) Displacements No. 29 Flow Range Pressure Range Temperature Range Viscosity
More informationCartridge Filter Housings Nowata A Series
Cartridge Filter Housings Nowata A Series Customization May Change the Model Number Designation to B, D or F Series 1. Introduction All A series cartridge filter housings are designed for efficient liquid
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationType 441 XXL 442 XXL. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441 442 Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 462.07-E Conventional design 40 Bolted Cap H1 18 Adjusting screw 19 Lock nut 69 Needle bearing 16 Upper
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationWelker Sampler. Installation, Operation, & Maintenance Manual. Model GSS-4HP
Installation, Operation, & Maintenance Manual Welker Sampler Model GSS-4HP The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct
More informationI N S T R U C T I O N M A N U A L
I N S T R U C T I O N M A N U A L M E T E R I N G P U M P S LINC84T-17, 18 & 20 Series Chemical Metering Pump Pneumatic Plunger T A B L E O F C O N T E N T S Contents - 84T-17, -18 & -20 Pump Manual...
More informationBC, BCF, BFF, BWF & BHF. Chokes
BC, BCF, BFF, BWF & BHF Chokes 2 AOP 2/2012-SWP-D BR-AOP-BC/BCF/BFF/BWF/BHF-CHOKES-01 CAMERON TECHNOLOGIES: AOP CHOKES AOP chokes are general purpose chokes suitable for a host of applications within the
More informationAnderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
More informationHoffman Specialty Service Parts Catalog PARTS LIST HS-800C
Hoffman Specialty Service Parts Catalog PARTS LIST HS-800C Hoffman Specialty Table of Contents STEAM TRAPS FLOAT AND THERMOSTATIC SERIES PAGE INVERTED BUCKET SERIES PAGE C 6 B0 H B I B X 6 B 6 8 B 6 0
More informationMaterials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
More informationVACUUM HOSES AND VALVES
VACUUM HOSES AND VALVES RANGE Name Description Max. use T C SK2VV232-1 Standard vacuum hose 232 C SK2VV232-2 Standard vacuum hose assemblies 232 C SK2VV232-3 QRC socket connector 232 C SK2VV232-4 QRC plug
More informationPISTON DIVERTER VALVES
DP Series DIVERTER VALVES PISTON DIVERTER VALVES PROCESS VALVES STRAHMAN DEAD SPACE FREE DIVERTER VALVES Piston Diverter Valves Code: DPS4 Standard branch angles: 45 o and 90 o 60 o and specific angles
More informationMallard Control Control Valves
Control Valves Excellence In Flow Control Mallard Model 5100 Freezeless Control (Dump) Valve Features Compact valve size Stainless steel trim Threaded process connections NACE MR0175 compliance option
More informationType 455, 456. Facts. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. US Units
Type 455, 456 Flanged Safety Relief Valves spring loaded US Units Facts The-Safety-Valve.com LWN 468.08-E 462.01-D 40 Cap H2 19 Lock nut 18 Adjusting screw 16 Upper spring plate 9 Bonnet 12 Spindle 54
More informationSeries 7100 Flow-Lift Piston Check Valve
Series 7100 Flow-Lift Piston Check Valve Award-Winning Design: Feature-packed valve provides solutions for gas, air or liquid systems The Norriseal Series 7100 Piston Check Valve* is designed for the prevention
More informationIGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
More information3-Piece High Pressure Ball Valves
3-Piece High Pressure Ball Valves Contromatics 3-Piece High Pressure Ball Valves Series 735/ 835 3/4"- 21/2" Reduced Port, 45 WOG* 735-Carbon Steel Body, Stainless Steel Trim 835-All Stainless Steel Construction
More information