XM-4424 INTERNATIONAL OLYMPIC BENCH with LEG & PREACHER
|
|
- Rafe Thompson
- 5 years ago
- Views:
Transcription
1 XM-4424 INTERNATIONAL OLYMPIC BENCH with LEG & PREACHER Owner s Manual 8/09 Read all precautions and instructions in this manual before using this equipment.
2 Table of Contents Before You Begin Important Safety Information Parts Identifier Assembly Adjustments Attachments Parts List Exploded View Warranty Information
3 Before You Start This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our XMARK Fitness help line. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register online at within 10 days of purchase. MAILING ADDRESS XMARK Fitness 7501 Trammel Drive Shreveport, LA THANK YOU for making this unit a part of your exercise program. XMARK Fitness assures the very best in value, appearance, durability and biomechanics. QUESTIONS? CALL Monday-Friday 8:30 a.m.-5:00 p.m. (Central Standard Time) XMARK FITNESS SERIES MODEL: XM-4424 When calling please have the following product information available: Model Name : XM-4424 Date Mfg.: Serial # Model Name Decal Location 3
4 Important Safety Information NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Prior to assembly, remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with preexisting health problems. XMARK Fitness assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner s responsibility to ensure that all users of this unit have read the Owner s Manual and are familiar with safety information and precautions. SAFETY PRECAUTIONS This unit should only be used on a level surface and is intended for indoor use only. XMARK Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! Always examine your unit before using to ensure all parts are in working order. Do not leave children unsupervised near or on the unit. Service to your unit should only be performed by an authorized service representative, unless authorized and/or instructed by a XMARK Fitness technician. Failure to follow these instructions will void the warranty. 4
5 Parts Identifier Getting Started - The XMARK Fitness International Bench requires some assembly. Unpack the box in a clear area. Remove packing material. Do not dispose of packing material until assembly is complete and unit is working properly. Place the unit on a clean level surface for assembly. Before assembling, the unit should be placed as close as possible to its final location. If you are missing any parts or hardware, please call XMARK Fitness at Tools have been provided to assist with product assembly. XMARK Fitness recommends that two people assemble the unit. The included hex key, grease packet, and the following tools (not included) are recommended for assembly. Note: Some hardware may be pre-installed in some parts. Hex Key (Included) M6 x 20mm Bolt (41) Two Adjustable Wrenches M10 Locknut () M4 x 16mm Screw (57) M6 x 40mm Bolt (48) Rubber Mallet Flat Head Screwdriver M8 Locknut (49) M8 x 60mm Bolt (59) Phillips Head Screwdriver M10 x 60mm Carriage Bolt (29) M10 Washer (43) M8 x 65mm Bolt (46) Weight Rest SafetySpotter M8 Washer (50) M10 x 65mm Bolt (30) Arm Curl Pad Adjustable Tube M8 x 70mm Bolt (71) M6 Washer (54) Leg Extension w/ Curl Bar M10 x 70mm Bolt (33) Weight Plate Holder M10 x 70mm Bolt Set (55) M10 x 95mm Bolt (64) Olympic Adapter M10 x 120mm Bolt (14) M10 x 145mm Bolt (53) 5
6 Assembly Note: Make sure the recessed areas around the holes on stabilizers are on the bottom. Step 1 Insert four M10X60mm carriage bolts (29) up through the bottom of the right stabilizer (2). Attach the right upright (4) to the right stabilizer (2) with indicated carriage bolts and locknuts (). Repeat to complete the assembly of the left stabilizer (1) and left upright (3). Figure Recessed Areas NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 6
7 Assembly Step 2 Attach the cross bar (5) to the right upright (4) using two M10X120mm bolts (14), an upright plate (15), and two M10 lock nuts (). Repeat to complete the assembly for the left upright (not shown). Figure Step 3 Attach the right rear support (7) to the right stabilizer (2) using the indicated M10X60mm carriage bolts (29) and two M10 lock nuts (). Secure the right rear support (7) to the right upright (4) using two M10X65mm bolts (30), two M10 washers (43), and two M10 locknuts (). Repeat to complete the assembly for the left side (not shown). 14 Figure
8 Assembly Step 4 Attach the front leg (12) to the front stabilizer (11) with two M10X95mm bolts (64) and two M10 lock nuts (). Figure Step 5 Position the frame (8) so that the hexagonal holes are on the bottom. Attach the frame (8) to the crossbar (5) using three M10X70mm bolts (33), two M10 washers (43), and three M10 lock nuts (). Figure Hexagonal Holes NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 8
9 Assembly Step 6 Pull the Pop Pin (45) out as far as it will go and slide the seat carriage (42) onto the Frame (8). Attach the front leg (12) to the frame (8) using two M8X60mm bolts (59), two M8X65mm bolts (46), six M8 washers (50), and four M8 lock nuts (49). Figure Step 7 Set the pins on the adjustment tube (9) into a set of brackets located on the left and right uprights (3 & 4). Figure Pin 9 Pin NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 9 3
10 Assembly Step 8 Attach the tether on the seat adjustment pin (40) to the seat frame (10) using an M4X16mm screw (57). Attach the seat pad (21) to the seat frame (10) with four M6X20mm screws (41). 21 Figure Step 9 41 Attach the Upper Back Pad (22) and Lower Back Pad (25) to the two backrest frames (17) with eight M6X40mm screws (48) and eight M6 washers (54). Note: Do not fully tighten the screws yet NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 10
11 Assembly Step 10 Apply a small amount of grease (included) to an M10X145mm bolt (53). Attach the seat frame (10) and the backrest frames (17) to the seat carriage (42) using the M10X145mm bolt (53), two M10 washers (43), and an M10 lock nut (). Note: 1) The seat pad (21) has been removed from the drawing to clarify the installation to the seat carriage (42). 2) Do not overtighten the nylon locknut, the seat and backrest frames must pivot easily. Insert the seat adjustment pin (40) through the seat frame (10) and tube located on the seat carriage (42). Tighten the four M6X40mm screws (48) that were installed in Step 9. Figure T ube 42 Grease Step 11 Attach the weight tube (19) to the leg lever (18) using an M8X70mm bolt (71), two M8 washers (50), a 17mmX9mm spacer (61), and a M8 lock nut (49). Place the 25mm round outer cap (62) onto the end of the weight tube (19). Figure NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 11
12 Assembly Step 12 Apply grease to the barrel of the M10X70mm bolt set (55). Next, attach the leg lever (18) to the front leg (12) and secure using the bolt set (55). Make sure the barrel of the bolt set (55) is inserted through both sides of the bracket on the front leg (12). Note: Do not overtighten the bolt set; the leg lever must pivot easily. Figure Grease 18 Bracket 12 Step 13 Insert a Foam Roller tube (24) into either hole on the front leg (12). Slide a Foam Roller() onto each end of the Foam roller Tube (24). Insert a Foam Roller Tube (24) into a hole on the Leg lever (18). Slide a foam Roller () onto each end of the Foam Roller Tube (24). Press a foam roller cap (68) into each end of the tube NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 12
13 Assembly Step 14 Insert a weight rest (39) into the right upright (4) and secure by engaging the locking bar around the upright. Insert a safety spotter (27) into the right upright (4) and secure by engaging the locking bar around the upright. Repeat for left side. Figure Locking Bar 4 27 Step 15 Attach the curl pad (20) to the curl post (13) using two M6X20mm screws (41). Figure NOTE: Hand tighten bolts and lock nuts until machine is fully assembled. 13
14 Assembly Step 16 Attach the curl bar (31) to the leg lever (18) and secure with the curl bar pin (28). Next, attach the tether on the curl bar pin (28) to the leg lever (18) using a M4X16mm screw (57). Figure Step 17 Tighten all hardware from the previous steps using the appropriate tools. 14
15 Assembly CONGRATULATIONS! You have completed assembly of your XMARK Fitness International Olympic Bench 15
16 Adjustments Seat Adjustments To move the seat (21), loosen the Pop pin (45) and pull it out as far as it will go. Slide the seat carriage (42) to the desired position and release the pop pin (45) back into the bench frame (8). Retighten the Pop pin (45). See Figure A To adjust the angle of the seat (21), remove the seat adjustment pin (40). Insert the pin into the other hole on the seat frame (10) and the tube on the seat carriage (42). See Figure B Tube Figure A Figure B Backrest Adjustment First, move the seat pad to the desired position (see the Seat Pad Adjustment section). Next, move the adjustment tube (9) to the desired height. Make sure the pins on the adjustment tube are inserted into the brackets on the left and right uprights (3 & 4). Finally, rest the backrest on the adjustment tube. 22 Pin
17 Attachments Curl Bar Attachment Attach the curl bar (31) to the leg lever (18) and secure by inserting the curl bar pin (28). Note: You will need to remove the curl bar when using the leg extension Olympic Plate Adapter To use olympic weights, secure the olympic adapter (47) to the weight tube (19) using M8X10mm set screw (60). Make sure the set screw (60) is on the bottom of the adapter. included large spring clip (not shown). Secure the weight plates with WARNING! Do not place more than 150 pounds on the weight tube. Secure the weights with spring clips. 17
18 Attachments Arm Curl Post Remove the 64mm square inner cap (69) from front leg (12). Insert the curl post (13) into the front leg (12) and align the holes. Secure the curl post (13) with the curl post knob (56). Note: Make sure that the knob is fully tightened. When performing exercises that do not require the curl pad (20), remove the curl post (13) and store it on the storage tube on the right stabilizer (2). Reinsert the 64mm (69) square inner cap into the front leg Weight Rests and Safety Spotters To use a barbell (not included) with the weight bench, first move the weight rests (39) and safety spotters (27) to the correct height for the exercise to be performed. Engage the locking bars around the left and right uprights. Note: The weight rests (39) and safety spotters (27) can be inserted onto the other side of the left and right uprights for squat exercises. 39 Locking Bar 27 4 Locking Bar WARNING! Do not place more than 300 pounds (including barbell) on the weight rests or safety spotters. Always place both weight rests (39) and safety spotters (27) at the same height. Make sure the locking bars are securely wrapped around the uprights before setting a barbell on them. 18
19 Parts List XM-4424 Parts List Key NO. Part No. DESCRIPTION QTY LEFT STABILIZER, XM RIGHT STABILIZER, XM LEFT UPRIGHT, XM RIGHT UPRIGHT, XM CROSS BAR, XM LEFT REAR SUPPORT, XM RIGHT REAR SUPPORT, XM FRAME, XM ADJUSTMENT TUBE, XM SEAT FRAME, XM FRONT STABILIZER FRONT LEG, XM ARM CURL POST, XM BOLT, M10* UPRIGHT PLATE, XM UPRIGHT COVER, XM BACKREST FRAME, XM LEG LEVER, XM WEIGHT TUBE, XM CURL PAD, XM SEAT PAD, XM BACKREST, XM FOAM ROLLER, XM FOAM ROLLER TUBE, XM LOWER BACK PAD,XM SQUARE BUSHING, XM SAFETY SPOTTER, XM CURL BAR PIN, XM M10 x 60MM CARRIAGE BOLT, XM BOLT, M10X CURL BAR, XM MM x 40MM INNER CAP, XM BOLT, M10X MM SQUARE INNER CAP, XM MM x 50MM INNER CAP, XM MM Square INNER CAP, XM MM x 100MM INNER CAP, XM BOLT PACK WEIGHT REST, XM SEAT ADJUSTMENT PIN, XM M6X20MM BOLT, XM SEAT CARRIAGE, XM M10 WASHER, E MM ROUND INNER CAP, XM POP PIN, XM BOLTS M8X OLYMPIC SLEEVE, XM M6x40MM BOLT, XM LOCKNUT M M8 WASHER, XM SPRING CLIP " SPRING CLIP M10x145MM BOLT, XM WASHER M M10 x 70MM BOLT Set, XM KNOB, XM M4 x 16MM SCREW, XM LOCK NUT M M8 x 60MM BOLT, XM M8 x 10MM Set SCREW, XM MM x 9MM Spacer, XM ROUND OUTER CAP, 25MM MM SQUARE INNER CAP, XM M10 x 95MM BOLT, XM BUSHING, XM BUMPER, XM MM ROUND INNER CAP, XM FOAM ROLLER CAP, XM MM Square INNER CAP, XM MM x 75MM INNER CAP, XM BOLT, M8X OWNER'S MANUAL, XM WRENCH, ALLEN S= WRENCH, ALLEN S=4 1 19
20 20 Exploded View
21 21 Exploded View
22 XMARK Fitness 7501 Trammel Drive Shreveport, LA Customer Service:
XM Owner s Manual. FID BENCH with LEG & PREACHER. Read all precautions and instructions in this manual before using this equipment.
XM-49 FID BENCH with LEG & PREACHER Owner s Manual 8/09 Read all precautions and instructions in this manual before using this equipment. Table of Contents Important Safety Information Assembly Parts List
More informationUSER'S MANUAL QUESTIONS?
Model No. WESY19510 Serial No. (Write the serial number in the space above for reference.) USER'S MANUAL Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer
More informationUSER'S MANUAL QUESTIONS? TABLE OF CONTENTS CAUTION. Model No. GGSY49230 Serial No. Serial Number Decal (Under Seat)
Model No. GGSY4920 Serial No. Write the serial number in the space above for reference. USER'S MANUAL Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are committed to providing complete
More informationUSER S MANUAL CAUTION. Visit our website at. new products, prizes, fitness tips, and much more!
Patent Pending Model No. 831.159730 Serial No. The serial number is found in the location shown below. Write the serial number in the space above. USER S MANUAL Serial Number Decal SEARS, ROEBUCK AND CO.
More informationUSER S MANUAL CAUTION. Visit our website at. new products, prizes, fitness tips, and much more! Model No Serial No.
Model No. 831.19832 Serial No. The serial number is found in the location shown below. Write the serial number in the space above. USER S MANUAL Serial Number Decal SEARS, ROEBUCK AND CO. HOFFMAN ESTATES,
More informationEVERLAST EVE-840 WEIGHT BENCH
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction EVERLAST EVE-840 WEIGHT BENCH Exploded Diagram Parts List Warranty
More informationMARCY WEIGHT BENCH WM-367. Model WM-367. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Parts List MARCY WEIGHT BENCH WM-367 Warranty Ordering Parts
More informationMARCY WEIGHT BENCH MWB 715B. Model MWB 715B. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Safety Notice Hardware Identifier Assembly Instruction MARCY WEIGHT BENCH MWB 715B Parts List Warranty Ordering Parts Model MWB 715B
More informationUSER'S MANUAL QUESTIONS? CAUTION. Model No. GGSY Serial No. Write the serial number in the space above for reference.
Æ Model No. GGSY91.0 Serial No. Write the serial number in the space above for reference. USER'S MANUAL Serial Number Decal QUESTIONS? As a manufacturer, we are committed to providing complete customer
More informationMARCY DIAMOND WEIGHT BENCH MD-844
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction MARCY DIAMOND WEIGHT BENCH MD-844 Exploded Diagram Parts List Warranty
More informationMARCY DIAMOND ELITE OLYMPIC BENCH MD-857. Model MD-857. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY DIAMOND ELITE OLYMPIC BENCH MD-857 Parts List Warranty
More informationDELUXE OLYMPIC BENCH EVE Model EVE Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty DELUXE OLYMPIC BENCH EVE-1000 Ordering
More informationMARCY DIAMOND ELITE SMITH MACHINE
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY DIAMOND ELITE SMITH MACHINE SM-1050 Parts List Warranty
More informationQUESTIONS? PATENT PENDING. Model No. WESY85100 Serial No. Write the serial number in the space above for future reference.
PATENT PENDING Model No. WESY85100 Serial No. Write the serial number in the space above for future reference. Serial Number Decal-- QUESTIONS? As a manufacturer, we are commiffed to providing complete
More informationORDERING REPLACEMENT PARTS
ORDERING REPLACEMENT PARTS If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. office, or write: ICON Fitness Lifestyle Ltd. Greenwich House North Street
More informationUSER'S MANUAL ORDERING REPLACEMENT PARTS QUESTIONS? CAUTION. Visit our website at.
ORDERING REPLACEMENT PARTS If you encounter any difficulties or problems with this product, contact the ICON Fitness Lifestyle Ltd. office, or write: ICON Fitness Lifestyle Ltd. Greenwich House North Street
More informationEVERLAST SMITH BENCH EVE-890. Model EVE-890. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Warranty Ordering Parts EVERLAST SMITH BENCH EVE-890
More informationOWNER S MANUAL. Dick s Sporting Goods 345 Court Street Coraopolis, PA Tools Required: Allen Wrench
Tools Required: Adjustable Wrench Allen Wrench OWNER S MANUAL Retain This Manual For Reference Dick s Sporting Goods 345 Court Street Coraopolis, PA 15108 TABLE OF CONTENTS BEFORE YOU BEGIN..... 1 IMPORTANT
More informationMARCY WEIGHT BENCH WM PRO. Model WM PRO. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY WEIGHT BENCH WM PRO Parts List Warranty Ordering Parts
More informationIRON GRIP STRENGTH SMITH MACHINE
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction IRON GRIP STRENGTH SMITH MACHINE IGS-4350 Parts List Warranty
More informationWEIGHT BENCH MSS-7500
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice WEIGHT BENCH MSS-7500 Hardware Pack Assembly Instruction Exploded Diagram Parts List Warranty Ordering
More informationMARCY SMITH MACHINE SM Model SM Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction MARCY SMITH MACHINE SM-4008 Parts List Warranty Ordering Parts
More informationMARCY SMITH MACHINE MWB Model MWB Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY SMITH MACHINE MWB-4360 Parts List Warranty Ordering
More informationDELUXE SMITH MACHINE MSS Model MSS Retain This Manual for Reference
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice DELUXE SMITH MACHINE MSS-1280 Hardware Identifier Assembly Instruction Parts List Warranty Ordering
More informationUSER'S MANUAL QUESTIONS?
Model No. WESY86303 Serial No. Write the serial number in the space above for future reference. USER'S MANUAL Visit our website at Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are
More informationUSERÕS MANUAL QUESTIONS?
Model No. WESY8501 Serial No. Write the serial number in the space above for reference. USERÕS MANUAL Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are committed to providing complete
More informationUSER'S MANUAL QUESTIONS?
Model No. WESY9100 Serial No. Write the serial number in the space above for future reference. USER'S MANUAL Serial Number Decal (Under Seat) QUESTIONS? As a manufacturer, we are committed to providing
More informationPOWERHOUSE CORNER GYM GS 9
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List POWERHOUSE CORNER GYM GS 9 Resistance Chart Warranty
More informationGS5 GYM MULTI STATION USER MANUAL
GS5 GYM MULTI STATION USER MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner s manual for future
More informationASSEMBLY MANUAL 9GU - COMMERCIAL UPRIGHT BIKE
ASSEMBLY MANUAL 9GU - COMMERCIAL UPRIGHT BIKE IMPORTANT SAFETY INSTRUCTIONS Read this Owner s Manual and follow it s instructions carefully before using the machine. Make sure that it is properly assembled
More informationUSERÕS MANUAL QUESTIONS? CAUTION. Model No. PFSY92080 Serial No.
Model No. PFSY92080 Serial No. The serial number is found in the location shown below. Write the serial number in the space above. USERÕS MANUAL QUESTIONS? Serial Number Decal As a manufacturer, we are
More informationMARCY PREMIER HOME GYM
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction MARCY PREMIER HOME GYM Parts List Resistance Chart Warranty
More informationSMITH MACHINE F-SM. Model F-SM. Retain This Manual for Reference OWNER'S MANUAL
-- NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice SMITH MACHINE F-SM Hardware Identifier Assembly Instruction Parts List Model F-SM Retain This Manual
More informationPERFORM THE FOLLOWING SAFETY CHECK DAILY:
FITNESS Introduction We at Vectra Fitness appreciate your selection of our product for your fitness program, and invite your questions and comments. We're sure that you ll be pleased with your new Vectra
More informationBe Strong. NS 200X. Assembly Manual. Model: NS 200X. P/N: Rev A (10/04/2006)
Be Strong. Assembly Manual NS 00X Model: NS 00X P/N: 00-700 Rev A (0/0/00) TABLE OF CONTENTS Before You Assemble... 3 Product Specifications... Product Features... Parts List / Box Contents... 5 Exploded
More informationDeluxe Folding Bike XRB271 / XRB261. * This item is for consumer use only and it is not meant for commercial use. OWNER S MANUAL
Deluxe Folding Bike XRB271 / XRB261 * This item is for consumer use only and it is not meant for commercial use. OWNER S MANUAL General Information Safety Before you undertake any exercise program, please
More informationWALKING TREADMILL SF-T1407M USER MANUAL
WALKING TREADMILL SF-T1407M USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE
More informationIVK-2155 HOME GYM. Model IVK Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier IVK-2155 HOME GYM Assembly Instruction Parts List Warranty Ordering Parts Model
More informationWARNING DECAL PLACEMENT
I: EF/ 89 O0 Model No. 831.14923.0 Serial No. Write the serial number in the space above for reference. WEIGHT SYSTEM EXERCISER User's Manual _mber Decal Assembly Operation Maintenance Part List and Drawing
More informationConfidence. Fitness. Weight Lifting Bench
Confidence Fitness Weight Lifting Bench General Information Confidence Weight Lifting Bench has been designed and manufactured to comply with the latest British and European Safety Standards (BS EN 957)
More informationMD-3401 HOME GYM MARCY DIAMOND ELITE. Model MD Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier MARCY DIAMOND ELITE MD-3401 HOME GYM Assembly Instruction Parts List Warranty
More informationBELT DRIVE PRO INDOOR CYCLING BIKE SF-B901B USER MANUAL
BELT DRIVE PRO INDOOR CYCLING BIKE SF-B901B USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
More informationSUNNY PRO INDOOR CYCLING BIKE
SUNNY PRO INDOOR CYCLING BIKE SF-B901 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
More informationPRO INDOOR CYCLING BIKE
PRO INDOOR CYCLING BIKE SF-B901 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU
More informationMarcy Diamond Home Gym
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Marcy Diamond Home Gym MD-2109 Parts List Resistance Chart
More informationBELT DRIVE INDOOR CYCLING BIKE
BELT DRIVE INDOOR CYCLING BIKE SF-B1002 USER MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact:
More informationOWNER S MANUAL F-G3-BASE CAUTION!
OWNER S MANUAL F-G3-BASE CAUTION! ASSEMBLY MANUAL BEFORE YOU START Remove all parts from the packaging and separate and count each various component to ensure everything has been correctly provided. Follow
More informationMARCY PLATINUM MP 1105 HOME GYM
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Pack MARCY PLATINUM MP 1105 HOME GYM Assembly Instruction Parts List Resistance Chart Warranty
More informationAPEX JD-3.1 HYPER EXTENSION BENCH
NOTE: Please read all instructions carefully before using this product Safety Notice Hardware Identifier Assembly Instruction APEX JD-3.1 HYPER EXTENSION BENCH Parts List Warranty Ordering Parts Model
More informationMARCY PLATINUM MP-3500 HOME GYM
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier MARCY PLATINUM MP-3500 HOME GYM Assembly Instruction Parts List Warranty Ordering
More informationBODYFLEX GYM WM Model WM Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction BODYFLEX GYM WM 1407 Parts List Resistance Chart Warranty
More informationOWNER S MANUAL QUESTIONS? CAUTION. Model No. F811.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal
Model No. F811.0 Serial No. Write the serial number in the space above for reference. OWNER S MANUAL Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, please see
More informationOWNERS MANUAL MODEL ECT-2100 ELLIPTICAL CROSSTRAINER
OWNERS MANUAL MODEL ECT-00 ELLIPTICAL CROSSTRAINER QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will
More informationInvert Extend N Go SF-BH6719 USER MANUAL
Invert Extend N Go SF-BH6719 USER MANUAL IMPORTANT! Read all instructions carefully before using this product. Retain owner s manual for future reference. For customer service, please contact: support@sunnyhealthfitness.com
More informationMagnetic Elliptical Trainer
Magnetic Elliptical Trainer ITEM NO.: 400 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this
More informationUser s Manual. Table of Contents CAUTION. Model No. MTSC11700
Model No. MTSC11700 Table of Contents Important Precautions..........2 Before You Begin.............3 How to Set Up and Fold the Scooter...............4 How to Operate the Scooter......5 Part List.....................6
More informationWMGG-224. GOLD S GYM Multi Purpose Bench. Model WMGG-224. Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Content Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts GOLD S GYM Multi Purpose
More informationFULL MOTION ROWING MACHINE SF-RW5639 USER MANUAL
FULL MOTION ROWING MACHINE SF-RW5639 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL
More informationBRF 700 BRF 701. Fan Bike OWNER S MANUAL. * This item is for consumer use only and it is not meant for commercial use.
BRF 700 Fan Bike BRF 701 * This item is for consumer use only and it is not meant for commercial use. OWNER S MANUAL General Information Safety Before you undertake any exercise program, please be sure
More informationEASY ADJUSTABLE SEAT RECUMBENT BIKE
EASY ADJUSTABLE SEAT RECUMBENT BIKE SF-RB4616 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
More informationUSER'S MANUAL ORDERING REPLACEMENT PARTS QUESTIONS? CAUTION. Visit our website at.
ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: Unit Revie Road Industrial Estate Revie Road Beeston Leeds, LSJG UK Tel: 0 0 00 Outside
More informationASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS TABLE OF CONTENTS: Introduction Pg. 2 Safety Precautions Pg. - Pg. 4 Assembly Instructions Pg. 5 - Pg. 9 SBU-400 Exploded View Diagram Pg. 10 SHS-410 Exploded View Diagram Pg. 11
More informationBRF 700 Fan Bike. * This item is for consumer use only and it is not meant for commercial use.
BRF 700 Fan Bike * This item is for consumer use only and it is not meant for commercial use. OWNER S MANUAL This page intentionally left blank General Information Safety Before you undertake any exercise
More informationMARCY SMITH MACHINE SM Model SM Retain This Manual for Reference OWNER'S MANUAL
NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice Important Assembly Information MARCY SMITH MACHINE SM-4008 Care and Maintenance Parts List Warranty
More informationUSER'S MANUAL ORDERING REPLACEMENT PARTS QUESTIONS? CAUTION. Visit our website at.
ORDERING REPLACEMENT PARTS To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: Unit Revie Road Industrial Estate Revie Road Beeston Leeds, LSJG UK Tel: 0 0 00 Outside
More informationOWNER S MANUAL QUESTIONS? CAUTION. Visit our website at. Model No. GZFI Serial No.
OWNER S MANUAL Model No. GZFI8008.0 Serial No. Write the serial number in the space above for future reference. Serial Number Decal (inside tower) QUESTIONS? At FreeMotion Fitness, we are committed to
More informationMARCY BODY CYCLE MCPL-105
NOTE: Please read all instructions carefully before using this product Safety Notice Hardware Identifier MARCY BODY CYCLE MCPL-105 Assembly Instruction Parts List Warranty Ordering Parts Model MCPL 105
More informationUSERʼS MANUAL QUESTIONS? CAUTION. Model No. WEBE Serial No.
www.weiderfitness.com Model No. WEBE0878.1 Serial No. Write the serial number in the space above for future reference. USERʼS MANUAL Serial Number Decal QUESTIONS? If you have questions, or if parts are
More informationG1 STRENGTH 3-STACK MULTI-GYM
G STRENGTH 3-STACK MULTI-GYM IMPORTANT SAFETY INFORMATION It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or
More informationEVO-1162 EVO Tailgate Tire Carrier
EVO-1162 EVO Tailgate Tire Carrier Bill of Materials EVO-1162 Tailgate Tire Carrier Part number Description Quantity EVO-12161 EVO Tailgate Tire Carrier 1 EVO-12162 Bolt Plate 1 EVO-12163 Wheel Mount 1
More informationThe M7 Direct Flow Intercooler (DFIC) Installation Guide
The M7 Direct Flow Intercooler (DFIC) Installation Guide This information is meant only as a guide. The author of this information,, or any M7 Tuning employees assumes no liabilities for any outcomes resulting
More informationPT1 Power Trainer ASSEMBLY & OPERATION MANUAL RECORD SERIAL NUMBER HERE
PT1 Power Trainer ASSEMBLY & OPERATION MANUAL RECORD SERIAL NUMBER HERE www.inspirefitness.net by Health In Motion LLC Dec. 2010 TABLE OF CONTENTS Section Description.. Page Instructions.. 1 Tools Required
More informationHG-6 Owners Manual. Table of Contents. Assembly Instructions Use and Operation of Your PROSPOTfitness Product
HG-6 Owners Manual Table of Contents Assembly Instructions......2-17 Use and Operation of Your PROSPOTfitness Product...18-22 Periodic Maintenance of your PROSPOTfitness Product. 23 Parts List...24-25
More informationHow to Assemble the Allegro Tower of Power
How to Assemble the Allegro Tower of Power Prior to assembly, check the parts and components received against the following list. If you are missing any parts, contact the Balanced Body customer service
More informationM5.2 ASSEMBLY & OPERATION MANUAL
M5.2 ASSEMBLY & OPERATION MANUAL RECORD SERIAL NUMBER HERE www.inspirefitness.net by Health In Motion LLC Mar. 2015 CONGRATULATIONS You ve just taken the first step to a healthier and stronger body. This
More informationCan-Am Spyder RT One-piece Seat and Passenger Backrest
Can-Am Spyder RT 2010-2018 One-piece Seat and Passenger Backrest Hardware: Tools needed: Seat: Stock rear mounting bolts and box nuts ¼ 20 x 5 / 8 " Phillips screws x 2 (included) Metric hex wrenches (seat)
More informationCROSS TRAINING MAGNETIC RECUMBENT BIKE
CROSS TRAINING MAGNETIC RECUMBENT BIKE SF-RB4708 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT
More informationASSEMBLY MANUAL. Manual en Español Latino Americano:
ASSEMLY MANUAL Manual en Español Latino Americano: www.support.nautilus.com Table of Contents / Registration Congratulations on your commitment to fitness and your purchase of the owflex Xtreme 2 SE home
More informationRECUMBENT BIKE WITH ARM EXERCISER
RECUMBENT BIKE WITH ARM EXERCISER SF-RB4631 USER MANUAL IMPORTANT! Please retain owner s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN
More informationG3-MS20 G3-MS40 G3-MS24 G3-MS51 G3-MS52 G3-MS53 G3-MS50 G3-MS80 AURA SERIES
AURA SERIES G3-MS G3-MS5 G3-MS5 G3-MS53 G3-MS0 G3-MS0 G3-MS50 G3-MS80 IMPORTANT SAFETY INFORMATION It is the sole responsibility of the purchaser of MATRIX products to instruct all individuals, whether
More information202 Schwinn Recumbent Exercise Bike
202 Schwinn Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions 202 Recumbent Exercise Bike IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious
More informationInversion Table OWNER S MANUAL. Item
Inversion Table OWNER S MANUAL Item TABLE OF SERVICE ------------------------------------------------------------------------- 2 IMPORTANT LABELS --------------------------------------------------------
More informationASSEMBLY INSTRUCTIONS / OWNERS MANUAL AIR BIKE AB-1
AIR BIKE AB- ASSEMBLY INSTRUCTIONS / OWNERS MANUAL IMPORTANT : READ ALL ASSEMBLY INSTRUCTIONS AND SAFETY PRECAUTIONS BEFORE USING THIS PRODUCT. REFERENCE ALL SAFETY GUIDELINES AND WARNING LABELS. RETAIN
More informationMagnetic Rowing Machine with Aluminum Slide Rail User Manual RW026 USER MANUAL
Magnetic Rowing Machine with Aluminum Slide Rail User Manual MODEL NO.: RW026 IMPORTANT! Read all instructions carefully before using this product. Save this manual for future reference. EXERCISE EQUIPMENT
More informationMAGNETIC RECUMBENT BIKE
MAGNETIC RECUMBENT BIKE SF-RB4417 USER MANUAL IMPORTANT: Please read this manual carefully before using the product. Retain owner s manual for future reference. For Customer Service, please contact: support@sunnyhealthfitness.com
More informationOwner's Manual. Model#: This Product is Distributed Exclusively by. CAUTION: Weight on this product should not exceed 250 lbs.
Owner's Manual! WARNING Exercise can present a h e a l t h r i s k. C o n s u l t a physician before beginning any exercise program with this equipment. If you feel faint or dizzy, immediately discontinue
More informationTRIPULL RX2500T. Assembly Instructions & Manual DOC: T. Configuration subject to change
TRIPULL RX2500T Assembly Instructions & Manual DOC: 32-1005T Configuration subject to change 32-100 5 T R E V. A WARNING DECAL PLACEMENT The decals shown here have been placed on the equipment in indicated
More information2005+ Roll Bar (Mm5RB-20.1 to -20.6) Recommended Center punch 1/8" pilot drill 1-3/4" Hole saw 2" Hole saw
3430 Sacramento Dr., Unit D San Luis Obispo, CA 93401 Telephone: 805/544-8748 Fax: 805/544-8645 www.maximummotorsports.com 2005+ Roll Bar (Mm5RB-20.1 to -20.6) Recommended Center punch 1/8" pilot drill
More informationS-Drive Performance Trainer
S-Drive Performance Trainer SERVICE MANUAl Table of contents CHAPTER 1: Serial number location... 1 CHAPTER 2: Important Safety instructions 2.1 Read and Save These Instructions... 2 2.2 Before Getting
More informationUser s Manual. Table of Contents CAUTION. Model No. MTSC20000
Model No. MTSC20000 Table of Contents Important Precautions..........2 Limited Warranty..............2 Before You Begin.............3 How to Set Up and Fold the Scooter...............4 How to Operate the
More informationHeavy Duty Deluxe Inversion Therapy Table Model ITX9600/IT9600
Heavy Duty Deluxe Inversion Therapy Table Model ITX9600/IT9600 WARNING: DO NOT USE this equipment without a licensed physician s approval. READ ALL INSTRUCTIONS carefully before using. Misuse of this equipment
More informationAXIS Smith Trainer Owner's Manual
Revision 0 June 2018 Smith Trainer Owner s Manual Serial Number Here Date of Purchase www.batcafitness.com AXIS Smith Trainer Owner's Manual Instructions Congratulations on the purchase of your new Batca
More informationINSTRUCTIONS AND WARRANTY FOR THE STAND AID MODEL 1501 STAND AID SERIAL #
MAKERS OF STAND AID, PTA, FREEDOM CHAIR STAND AID MODEL 1501 PO BOX 386 Sheldon, IA 51201 1-800-831-8580 1-712-324-2153 (In Iowa) Fax: 712-324-5210 www.stand-aid.com INSTRUCTIONS AND WARRANTY FOR THE STAND
More informationFIT SERIES FIT-3 W/ LEG PRESS
FIT SERIES FIT-3 W/ LEG PRESS ASSEMBLY INSTRUCTIONS Part # 734820 Rev C. Revision:4/04/03 KEY 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 32 33 34 35 36 37 38 39 40 4 42 PART #
More informationXINGGUI Elliptical Cross Trainer
XINGGUI Elliptical Cross Trainer ITEM NO.: 93040 OWNER S MANUAL IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications
More informationOWNER S MANUAL QUESTIONS? CAUTION Visit our website at. Visit our website at. Visit our website at.
OWNER S MANUAL Model No. GZFI8186.0 Serial No. Write the serial number in the space above for future reference. Serial Number Decal (inside tower) QUESTIONS? At FreeMotion Fitness, we are committed to
More informationFREE WEIGHT EQUIPMENT
CHECK OUT MORE LEGEND FITNESS INSTALLATIONS ONLINE. FEATURED INSTALL: COLORADO STATE REC CENTER Check out more installation showcases on page 76. Visit our website to get a look at corporate wellness centers,
More informationOr call us at: Hours: 8:00 am to 5:00 pm Monday thru Friday
Bench IMPORTANT: Read all instructions carefully before using this product. Retain this owner s manual for future reference. The specifications of this product may vary from this photo, subject to change
More informationSR Performance Sway Bars (2010 Mustang GT)
Total Installation time: Approximately 2 hours SR Performance Sway Bars (2010 Mustang GT) Tools Required: 15mm deep socket 18mm deep socket 19mm deep socket Ratchet with ½ drive Pliers Torque wrench 15mm
More informationTable of Contents. P-LP14 Leg Press. Weight Capacity. 1,000 Lbs. Featured Exercise. Leg Press. Recommended Strength Classic Systems
Thank you for purchasing your new Powertec equipment. To maximize the use of this Equipment, please take a moment to study, understand and familiarize with the assembly instructions and follow the sequence
More information