Volition. VF-45 Quick Install kit. and Maintenance Cleaning Kit. 3Innovation
|
|
- Rosalind Patterson
- 5 years ago
- Views:
Transcription
1 Volition VF-45 Quick Install Kit and Maintenance Cleaning Kit O b D s oc ol e um te en t COOL HAND TOOLS. VF-45 Quick Install kit Get your hands on a VF-45 Quick Install Kit from 3M and you will have everything you need to quickly and easily install VF-45 Sockets onto duplex fiber optic cable. Cable and fiber strippers, polishing and socket assembly fixtures, and inspection view scope all fit in a pouch that can be clipped onto a tech s belt. The termination kit works in concert with the snap together design of the socket to eliminate most of the steps and labor associated with traditional fiber optic terminations. With the VF-45 quick install kit, you can terminate the VF-45 socket faster and easier, in less than two minutes. 3Innovation
2 VF-45 Quick Install kit Features Benefits Simplified process Belt-loop micro pouch Cool tool design specifications Installation notes Faster and easier to use Easy to carry and easy to use Integrated process and higher reliability with fewer steps 500 terminations of the VF-45 Socket per consumables are included in the kit. Individual replacement of consumables and hand tools are available. 99% Reagent Grade Isopropyl Alcohol purchased separately. Storage temperature: -40 to 60 C (-40 to 140 F) The hand tools included in the kit are used to prepare Volition Optical Fiber Cable by stripping duplex fibers simultaneously for termination with VF-45 sockets. Simultaneous duplex termination saves labor and speeds installation, resulting in complete terminations in less than two minutes. The Polishing Puck Assembly, Polishing Station Base and Lapping Film provide for fiber end-face preparation to the specified length and finish for termination with VF-45 sockets, with as little as five back-and-forth strokes per termination. The Swabs and Wipes are used for cleaning, while the View Scope is used for inspection of the optical fibers following the termination process, ensuring a high yield of VF-45 terminations for high performance. When planning large installations, calculate 500 terminations of the VF-45 socket per package of: Lapping Film 5 Sheets Cotton Swabs 100 Swabs Lint Free Wipes 100 Sheets The Puck Polishing Face will wear slightly over hundreds of terminations and is replaceable when needed. The Scribe Blade Assembly will wear with use. Typical cleave button life is 2,500 terminations. The cleave button edge may wear prematurely due to harsh handling or stressful conditions. The Scribe Blade Assembly is available separately.
3 clean up your act. Maintenance cleaning kit The Volition Maintenance Cleaning Kit from 3M is used to clean VF-45 fiber interconnects located within wall boxes, patch panels or electronic equipment, operating at a just installed optical performance level. The system consists of a spray bottle of Volition HFE-Based Cleaning Fluid designed for cleaning VF-45 sockets and plugs. HFE-based cleaning fluid is non-flammable and non-conductive. The maintenance cleaning kit is a convenient, effective and quick way to clean fiber end-faces, without socket disassembly from wall outlet or panels. Features Front access spray cleaning HFE-Based cleaning solution Replacement bottle of cleaning solution kit contents specifications HFE-Based Cleaning Fluid Warning Benefits Volition VF-45 Maintenance Cleaning Kit 1-16 oz. bottle, Volition HFE-Based Cleaning Fluid 1 - Spray nozzle, trigger activation with socket spray head 1 - VF-45 Plug Cleaner Assembly HFE-Based Cleaning Fluid (Replacement) 16 oz. bottle, replacement for Maintenance Cleaning Kit Easy maintenance in tight spots, no disassembly of wall plates, reduced labor Non-flammable, non-conductive Cost effective Non-flammable Non-conductive Low toxicity Rapid drying Allows for front-face cleaning of VF-45 Socket, no disassembly from wall outlet or patch panels required 400 cleanings per 16 oz. bottle Storage temperature -40 to 60 C (-40 to 140 F) 16 oz. bottle, replacements available VF-45 SOCKET SPRAY HEAD (installed) Socket spray head inserts into the VF-45 socket (3M part VOL-0001 multimode, VOL-0002 single-mode) or compatible Volition component. Activation of the trigger sprayer delivers a high-force stream of HFE-Based Cleaning Fluid to achieve effective cleaning of terminated fiber end-faces. Do not substitute any other cleaning fluid due to the unique properties of HFE-Based Cleaning Fluid. Other fluids may damage sensitive electronic equipment and will not properly clean the VF-45 interconnect.
4 Ordering Information Model # Description VOL-0571 VF-45 High Performance Cleaning Kit VOL-0570A VOL-0570B Model # Description Stock # Qty. VOL-0562 VF-45 Quick Install Kit with Instruction Manual Included in Model # Description Stock # Qty. Kit Vol-0562 VOL-0562H Polishing Station Sub Assembly * VOL-0562S Quick Install Tool Case * VOL-0562M Quick Install Tool Pouch * VOL-0562K Lapping Film, 2" x 5" sheets/pkg. * 12 pkg. VOL-0560A Jacket Stripper * VOL-0560B Snips * VOL-0560C Buffer Stripper * VOL-0560D HFE-Based Cleaning Fluid, 16 oz. bottle Plug Cleaner Assembly Fiber Stripper, 250-µm coating * VOL-0560F Polishing Puck Assembly * VOL-0560L View Scope w/adapter Base * VOL-0560N Cotton Swabs * VOL-0560P Lint Free Wipes * VOL-0560R Bottle, Alcohol * VOL-0560W Cleaning Wires dia * Instruction Manual VOL-0562H Polishing Station Sub Assembly VOL-0562V Quick Install Station Door VOL-0562J Cleave Button with scribe VOL-0560G Polishing Puck Face VOL-0562L Penlight VOL-0562C View Scope Adapter VOL-0562X View Scope 75X VOL-0562B Blades, replacement duplex strip
5 VF-45 PLUG ADAPTER VF-45 PLUG ADAPTER Plug adapter couples the socket spray head to a VF-45 plug terminated on a patch cord or compatible Volition component. Activation of the trigger sprayer delivers a high-force stream of HFE-Based Cleaning Fluid to effectively clean fiber end-faces. Specifications 9.10 (231.14) 0.38 (9.91) Dimensions in. (cm) 2.90 (73.66) Volition VF-45 Maintenance Cleaning Kit (15.74) (14.73) 1.31 (33.27) VF-45 Socket Spray Head (installed) VF-45 Plug Adapter (included) 0.45 (11.43) 0.61 (15.49)
6 Important Notice Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one year from the date of purchase. 3M MAKES NO OTHER WARRANTIES 3 Telecom Systems Division 6801 River Place Blvd. Austin, TX FAX INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. Volition, VF-45 and the dot wave symbol are trademarks of 3M. 40% Pre-consumer waste paper 10% Post-consumer waste paper Litho in USA. 3M IPC
DOCUMENT OBSOLETE. Volition. VF-45 Socket Termination and Maintenance Cleaning Kits COOL HAND TOOLS. CLEAN UP YOUR ACT. VF-45 Socket Termination Kit
Volition VF-45 Socket Termination and Maintenance Cleaning Kits COOL HAND TOOLS. VF-45 Socket Termination Kit Get your hands on a Volition VF-45 Socket Termination Kit from 3M and you will have everything
More informationVolition. Fiber Optic Cable. 3Innovation
Volition Fiber Optic Cable Tough enough to take it. Easy to handle. Tough enough to take it. Easy to handle. The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm
More information3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions
3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions February 2008 78-8140-1581-0 Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber
More information3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm. Instructions. October C
3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm Instructions October 2010 78-8140-1581-0-C Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber
More information3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS
3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS Instructions January 2009 78-8140-3691-5-A Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber
More informationCable Ties. Data Sheet
Cable Ties Data Sheet Product Description 3M Cable Ties are molded from 6/6 Nylon and are available in a variety of sizes, styles and colors including weather resistant black for outdoor use. Agency Listings
More information3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm
3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm Instructions January 2009 78-8140-3696-4-A 3 Contents 1.0 Kit Contents... 3 2.0 3M No Polish LC Connector SM & MM 250/900 µm... 4 Safety Precautions
More information3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide
3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide Installing Tall Skirt on SVC and SVE cabinets Instructions July 2016 78-0015-3067-0 2 July 2016 78-0015-3067-0 Contents 1. General
More informationSLiC Aerial Closures
3 SLiC Aerial Closures 1 The 3M SLiC Closure is a singlepiece aerial closure easily installed in construction or maintenance situations. The one piece construction permits complete splice access after
More information3M Locator Plate
3M Locator Plate 3443-113 Instructions for the Assembly of 3M Tripolarized Wiremount Sockets 1.0 General The 3M Locator Plate 3443-113 was designed to aid in the assembly of the 3M Mini Socket Connector.50
More informationCold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN
3 Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class 350 kv BIL IEC 60840 72,5 kv Kit Contents: 1 Silicone Rubber Lug Seal Insulator
More information3M Locator Plate
M Locator Plate 44-94 Instructions for the assembly of M Socket Connectors,.100" x.100" and.100" x.200" 1.0 General M Manual and Pneumatic Assembly Presses and accessory assembly equipment are recommended
More information3M Cable Ties Product Guide. Made in USA. & Plenum Rated
3M Cable Ties Product Guide Made in USA & Plenum Rated A new line of general use cable ties from 3M Made in USA These ties are made of high quality 6/6 nylon in the USA, which offers excellent availability
More informationSLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks
SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks Instructions June 2002 78-8130-2161-1-B 1 Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Cable Preparation...
More information3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TS (RW)
3M Cold Shrink Skirted Termination Kit QT-III 7672-S-8-TS (RW) for Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325 kv BIL CAUTION Working around energized systems
More information3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW)
3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW) for Tape Over Wire and Wire Over Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325
More informationData Sheet July For RoHS information, please visit
Data Sheet July 2017 3M Cable Ties are molded from 6/6 nylon and are available in a variety of sizes and styles, including weather resistant black for outdoor use. Agency Approvals & Self Certifications
More information3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms
3M Products for Electrical Networks Wind Farm Capabilities Leading Edge Electrical Solutions for Wind Farms 3M technologies for wind farms Wind farm projects are difficult enough without the risk of construction
More information3 980/980E Ionized Air Gun Instruction Manual
3 980/980E Ionized Air Gun Instruction Manual Index Section Page 1. General Description... 3 2. Performance... 3 3. Power Requirements...3 4. Air Supply Requirements... 3 5. Installation...4 6. Assembling
More information3M Ladder Kit 3M710/MS 2 -TMK-LK
3M Ladder Kit 3M710/MS 2 -TMK-LK Instructions 1.0 Summary The 3M Ladder Kit 3M710/MS2-TMK-LK is intended for mounting a communication line splicing system to a fiberglass extension ladder. 2.0 Kit Contents
More information3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN
3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN For Jacketed Concentric Neutral (JCN) Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350 kv BIL IEC 60840 72,5
More informationModel 1100B CHG Terminator. Installation Instructions
Model 1100B CHG Terminator Installation Instructions 1 Contents: 1.0 Safety Information... 3 2.0 Set-up and Adjustments... 3 3.0 Ram Adjustments... 10 4.0 Wire Termination Quality... 12 5.0 General Maintenance...
More information3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC
3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC For Tape Shield or Longitudinally Corrugated (LC) Shielded Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350
More information3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT
3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT For Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350
More information3M Cold Shrink QT-III Silicone Rubber Termination
3M Cold Shrink QT-III Silicone Rubber Termination For Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Cable 7673-S-8(S)-TOW/WOT Instructions IEEE Std. No. 48 Class 1 Termination 69 kv Class, 350
More information3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array
3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array 1.0 mm Pitch Socket Platforms Socket Max. Package Maximum Max. Pin Lid Series Product Number
More information3M Closure System 2-Type Cover (505)
3M Closure System 2-Type Cover (505) Installation Instructions May 2009 78-8140-1009-2-B Contents 1.0 3M Closure Kit 2-Type Contents...3 2.0 Cover Installation...4 3.0 Closure Re-entry...6 4.0 Accessories...9
More informationCold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions
Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Class I Indoor Termination Voltage Designation: 12/20(24) kv Kit Contents: 1 HeatShrinkBreakoutBootAssembly 3 HeatShrinkBindingSleeves
More information3 740 Wrist strap + shoe tester
3 740 Wrist strap + shoe tester Operating Instructions April, 2001 740 wrist strap + shoe tester 3 < o.k. > 1 2 1 / 11 LED for «too w resistance» 740 wrist strap + shoe tester 3 < o.k. > 1 2 LED for «too
More information3M Mechanical Shearbolt Connectors, QCI Series
M Mechanical Shearbolt Connectors, QCI Series Data Sheet November 2011 Description Connector Contents M Mechanical Shearbolt Connectors, QCI Series are designed to cover a wide range of conductor sizes
More information3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity.
3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity. Better. To help make you better. As a painter, you take great pride in your work. You know that the ultimate quality of the
More information3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series
3 Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8 Series Data Sheet 1. Product Description 3M Cold Shrink Termination Kit QT-III 7672-S-8 Series contains one silicone rubber termination
More information710 Splicing Rig. Instructions. January E
710 Splicing Rig Instructions January 2007 Table of Contents 1.0 General Statement...4 2.0 3M 710-UTK25A Splicing Rig and Field Maintenance Kit...4 3.0 Straight Splicing using the 3M 710 25-pair modules...6
More informationMotor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables)
Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Instructions Kit Contents 3 Lug Covers 3 Cold Shrink Terminations 12
More information3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series
3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working
More information3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits
3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits With High-K Stress Relief For 3-Conductor Type G (Ground Wire), Copper Tape Shield, Armored Cables 7600-S-3G Series Instructions IEEE Std.
More information3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination
3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working around energized electrical systems may
More information3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit
3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit With High-K Stress Relief For 3-Conductor Copper Tape Shield Cables with or without Ground Wires 7600-T-3RJS Series Instructions
More information3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary
3M Electrical Tapes Product Selection Guide Insulate & Protect with Quality Tapes Get your hands on 3M Tape! 3M now offers new and experienced electricians a chance to sharpen their skills with the complete
More information8400 Series Fiber Distribution System
8400 Series Fiber Distribution System Instructions January 1997 34-7041-4699-1-A 1 Contents: 1.0 General... 3 2.0 System Components... 4 3.0 System Engineering... 5 4.0 Hardware Installation... 7 5.0 Cable
More informationQS-III. 5513A, 5514A, 5515A and 5516A 15 kv Cold Shrink Inline Splice Kits. Data Sheet CAUTION. 1. Product Description. 2. Applications.
QS-III 5513A, 5514A, 5515A and 5516A 15 kv Cold Shrink Inline Splice Kits Data Sheet Tape Shield Wire Shield UniShield Kit Contents: 1 Cold Shrink Silicone Rubber Splice Body 1 Cold Shrink Adapter Tube
More information3M Mini D Ribbon (MDR) Cable Assembly.050 High Speed Video Data Transmission System, 50 Position 14X50-SZWB-XXX-0NC
(MDR) Assembly Supports LVDS Channel Link signaling 20 shielded pairs (100 ohm) +4 drains for high bandwidth applications High density 50 position MDR with rugged ribbon type contact 3 Unshielded Twisted
More informationGM Specification Annual Test Data
GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing
More informationTechnical Data 3M Petroleum Sorbents
Technical Data 3M Petroleum Sorbents Use For control of spills of hydrocarbons on water or land. 3M Petroleum Sorbents repel water and will float (as long as surfactants are not also present). Product
More informationGM Specification Annual Test Data
GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing
More information3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:
3M Abrasive Systems Random Orbital Abrasive Disc Portfolio Sanding & Finishing Solutions! cs NsEivW e Dis Abra see inside Distributed by: The 3M Value The RIGHT Abrasives NEW Products NEW! Look for this
More information3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive
3 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive Technical Bulletin October, 2009 Description 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive incorporate several
More informationFinish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders
NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders Redefining The Finish Line 3M Elite Series Sanders NEW Elite Series Air-Powered Sanders and NEW Electric
More information3M Pleated Foil I/O Cable Assemblies MDR Series
Mates with standard 3M MDR Boardmount Headers Pleated copper foil provides a 360 degree shield Overmolded Assemblies Available in 68, 80 and 100 Positions Molded-in strain relief Can utilize either #4-40
More information3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs
3M Collision Repair Solutions 3M Abrasives and Power Tools Cutting & Grinding for Body Techs 3M Disc Sander Ideal for general metal fabrication applications, including grinding, blending, weld leveling
More information3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series
3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series Data Sheet March 2011 Description 3M Cold Shrink 1/C Transition Splice Kits QS-III, 5510A-1T-PILC Series (which includes 5513A-1T-PILC,
More informationRepair Method for 3M Resilient Floor Protection System
May 2013 Technical Bulletin Repair Method for 3M Resilient Floor Protection System Description The 3M Resilient Floor Protection system is designed to allow spot repair of areas damaged by scratching,
More information3M Ionized Air Gun 980/980E. User s Guide
3M Ionized Air Gun 980/980E User s Guide 1 Index Section Page 1. General Description... 3 2. Performance... 3 3. Power Requirements... 3 4. Air Supply Requirements... 4 5. Installation... 4 6. Assembling
More information3M Automotive Aftermarket. 3M Blue Abrasives. The upgrade you ve been waiting for.
3M Automotive Aftermarket 3M Blue Abrasives. The upgrade you ve been waiting for. 3M Stikit Blue Abrasive Disc 3M Blue Abrasives are your go-to workhorse for the entire shop. 5" 3M Hookit Blue Abrasive
More information3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED.
3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 13020160.indd 1 2/8/13 9:46 PM GRINDING REINVENTED 3MTM CubitronTM II bonded abrasive grinding and
More informationDOCUMENT OBSOLETE. 3M710 UniPresser for 25-Pair Modular Splicing. Instructions. April B
3710 UniPresser for 25-Pair odular Splicing Instructions D LT April 2001 Table of Contents Parts and Nomenclature.........................................2 Field aintenance Kit..........................................3
More informationVolition Fiber Optic Cable
Volition Fiber Optic Cable The Volition Network Solution from 3M includes horizontal and backbone cable with 62.5/125 µm and 50/125 µm multimode fiber, and 9/125 µm single-mode fiber. The horizontal cable
More information3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels
3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to grind. It s grinding reinvented. Featuring NEW cubitron ii cut & grind wheels Grinding Reinvented 3M TM Cubitron TM II bonded abrasive
More informationDoor Edge Protection Film 36 inch
Door Edge Protection Film 36 inch Technical Data Sheet June, 2013 3M Part No.(s) PN 3M Part Descriptor(s) Door Edge Protection Film 36 inch Product Description 3M Door Protection Film is a super tough
More information3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project
3M Electrical Markets Division Rubber, Mastic and Specialty Tapes Application Guide Choose the Right Tape for your Electrical Project 2 Table of Contents Insulating and Splicing...4 Scotch Linerless Rubber
More informationCold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief)
Cold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief) Instruction Sheet IEEE Std. No. 48 1990 Class 1 Termination 5/8.7 kv Class 95 kv BIL Kit Contents: 3 Hi K, Tracking Resistant,
More information3M Cold Shrink QS-III Inline Splice Kits 15 kv 5513A, 5514A, 5515A and 5516A
3M Cold Shrink QS-III Inline Splice Kits 15 kv Data Sheet June 2014! CAUTION Working around energized high-voltage systems may cause serious injury or death. Installation should be performed by personnel
More information3M Fiber Dome Closure FDC 10
3M Fiber ome losure F 10 With 3M Fiber Optic Splice Tray 2541 Instructions 1.0 General 2.0 Kit ontents The 3M Fiber ome losure F 10 can accommodate two 1.06" (27 mm) main cables, five 0.71" (18 mm) branch
More informationCrimp & Cleave Termination Instructions
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 50 and 62.5 µm GiHCS, 200 µm HCS LC Connectors For Use With: 50 and 62.5 µm GiHCS 2.2 mm Fiber Optic Cables 200 µm HCS 2.2
More information3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kits
3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kits With High Ampacity Ground Connection and High-K Stress Relief For Tape Shield, Wire-Over-Tape Shield and Longitudinally Corrugated (LC) Shield
More information3M Cold Shrink Splice Kit QS-III 5536A
3M Cold Shrink Splice Kit QS-III 5536A for UniShield, Wire Shielded, Longitudinally Corrugated (LC), and Tape Shielded (Ribbon Shielded) Cable or Transitions to Concentric Neutral (CN)/Jacketed Concentric
More informationK SERIES PUSH ON & BULLET TERMINALS
Industrial products we wholesale, you distribute K SERIES PUSH ON & BULLET TERMINALS NYLON INSULATED PUSH ON TERMINALS VINYL INSULATED PIGGY BACK PUSH ON TERMINALS NYLON FULLY INSULATED BULLET TERMINALS
More informationModel:M5B/M5W/M5N. Installation Guide. Specifications Desktop Weight Capacity Keyboard Tray Weight Capacity Height Adjustable Range
Model:M5B/M5W/M5N Installation Guide Website: www.flexispot.com Tel: 1-855-421-2808 Specifications Desktop Weight Capacity Keyboard Tray Weight Capacity Height Adjustable Range 33 Ibs (15 KG) 4.4 Ibs (2
More information3M Ionized Air Gun 980/980E. User s Guide
3M Ionized Air Gun 980/980E User s Guide Index Section Page 1. General Description... 3 2. Performance... 3 3. Power Requirements... 3 4. Air Supply Requirements... 4 5. Installation... 4 6. Assembling
More informationBranch Splice QS-2001B
Branch Splice QS-2001B Data Sheet 1. Product Description The 3M Branch Splice QS-2001B molded rubber splice kits are designed to connect extruded dielectric power cables rated 15 kv. The basic kits handle
More information3M Cold Shrink QT-III Silicone Rubber Indoor Termination Kits With High-K Stress Relief
3M Cold Shrink QT-III Silicone Rubber Indoor Termination Kits With High-K Stress Relief For Tape Shield, Wire Shield and UniShield Cable 7621-T-95, 7622-T-95, 7624-T-95, 7625-T-95 Instructions IEEE Std.
More information3M Cold Shrink QT-lll Silicone Rubber Skirted Termination Kit 7692-S-4, 7693-S-4, 7694-S-4, 7695-S-4, 7696-S-4
3M Cold Shrink QT-lll Silicone Rubber Skirted Termination Kit 7692-S-4, 7693-S-4, 7694-S-4, 7695-S-4, 7696-S-4 With High-K Stress Relief For Tape Shielded, Wire Shielded and UniShield Cable Instructions
More informationRear Sway Bar for XC90 ( ) 2.5T and T6 ipd mounting kit SBK42
Dedicated to improving vehicle fun, safety & performance Installation Instructions Rear Sway Bar for XC90 (2003-0) 2.5T and T6 ipd mounting kit SBK2 PI-298 08/06 Thank you for purchasing this anti-sway
More informationAssembly Instructions
TOOLS REQUIRED: _(2) 3/4 wrenches _7/16 wrench _3/8 wrench _5/16 allen wrench Display/work stand is for assembly procedure only. May be purchased separately. CONTENTS (PARTS & HARDWARE) _(1) Receiver tube
More information3M Three-Wall and Four-Wall Headers. Series 3XXX
1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...
More information3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable
3M Cold Shrink 3-Conductor Inline Splice Kits QS-III 5786A- MT, 5787A-MT and 5788A-MT 25/28 kv for use with Armored and Non- Armored 3/C Cable Data Sheet September 2010 Description 3M Cold Shrink 3-Conductor
More information3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv
3M Cold Shrink QT-III Silicone Rubber Termination Kits 7640-T and 7650-T Series 5, 8, 15, 25/28 and 35 kv Data Sheet September 2014 Description 3M Cold Shrink QT-III Silicone Rubber Termination Kits, 7640-T
More informationIntelligent Charging System. User Manual PB-80C24
Intelligent Charging System User Manual PB-80C24 Introduction The Intelligent Charging System uses power sensors and charging logic to deliver the fastest, most efficient possible charge. The system automatically
More information3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit
3M Cold Shrink QT-III Silicone Rubber Indoor Tubular Termination Kit With High-K Stress Relief For Tape Shield, Wire Shield and UniShield Cable 7622-T-110, 7624-T-110, 7625-T-110, 7626-T-110 Instructions
More information3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit
3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief For Tape Shielded, Wire Shielded and UniShield Cable 7685-S-8 Instructions IEEE Std. No. 48 Class 1 Termination 35
More informationSlimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current
Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current Thank you for buying a Rinehart Racing exhaust system. We are committed to providing premium products that with proper
More information3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810
1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9
More informationMega-Rail System Installation
Installation Manual Mega-Rail System P/N 030767-MRS 2003-2007 DODGE CUMMINS Mega-Rail System Installation Installation Instructions GDP 03-07 Mega-Rail System P/N 030767-MRS PLEASE READ ALL INSTRUCTIONS
More informationInstalling the Boom Mount ET 350 Monitor (Model ET 350R)
Installing the Boom Mount ET 350 Monitor (Model ET 350R) Intended Use When properly installed using the materials provided, and according to these instructions, the boom mount is intended to mount the
More information3M CP2 Press-Fit Headers and Sockets, 2 mm
1 of 7 3M CP2 Press-Fit Headers and Sockets, 2 mm A-Style CP2 Connectors CP2-SA110-G1-KR Right Angle Socket Connectors mated to CP2-HA110-GA1-KR Header Connectors 78-5102-0083-1 Revised Date: February
More informationReasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY. The simplex connector kit consists of a connector assembly, short boot, and tubing. The tubing is used with 250
More informationCrimp & Cleave Termination Instructions
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 50 and 62.5µm GiHCS, 200µm HCS SC and SC-RJ Connectors For Use With: 50 and 62.5µm GiHCS 2.5mm Aramid Reinforced Optical
More information3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief
3M Cold Shrink QT-III Silicone Rubber Skirted Termination Kit With High-K Stress Relief 7642-S-2, 7642-S-2(L) For Jacketed Concentric Neutral (JCN) and Concentric Neutral (CN) Cable Instructions IEEE Std.
More informationKR-70 Kit Acrylic Restoration
Required Level of Skill: KR-70 Kit Acrylic Restoration For use on non-pressurized aircraft: No specific training is required. For use on pressurized aircraft: Use should be restricted to licensed mechanics.
More informationAdjustable Radical Face Protector Owners Guide
Adjustable Radical Face Protector Owners Guide Model 40VIZI2 and 40VIZI4! This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow
More informationShaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications
NEW! 3M Cubitron II Abrasive Belts Introducing 994F and 997F for high pressure applications Shaping the future Revolutionary shaped abrasive grain grinds cooler and dramatically faster. Now engineered
More information<< FEATURES AND BENEFITS >>
PISTOL SLIDE MANUAL TABLE OF CONTENTS FEATURES AND BENEFITS... 2 ASSEMBLY AND INSTALLATION...3-4 INSTALLING TRIJICON RMR PLATE... 5 IMPORTANT SAFETY INFORMATION... 6 LIMITED WARRANTY... 7-10
More informationExternal Non-Contact Fluid Level Sensor
External Non-Contact Fluid Level Sensor NON-CONTACT SENSOR Tek Tanks Limited The Old Stables Tel: +44 (0)1420 520830 West End Farm Fax:+44 (0)1420 520840 Upper Froyle sales@tek-tanks.com Hampshire GU34
More informationOperating Instructions & Parts Manual
Aluminum / Steel Hybrid Service Jack Operating Instructions & Parts Manual Model 26017 26028 26033 Capacity 1.5 Ton 2.5 Ton 3 Ton! This is the safety alert symbol. It is used to alert you to potential
More informationAutomotive-Ready Portfolio of 3M Double Sided Tapes. Ready to go further. The future of automotive design begins here.
Ready to go further. The future of automotive design begins here. Unleash your design freedom Ŕ Ŕ Quickly and securely attach lightweight and hard-to-bond materials Design-ready. Production-ready. Future-ready.
More information3M Cold Shrink QT-II Silicone Rubber Indoor Termination Kits
3M Cold Shrink QT-II Silicone Rubber Indoor Termination Kits With High-K Stress Relief For Tape Shield, Wire Shield and UniShield Instructions IEEE Std. No. 48 Class 1 Termination 8 kv Class, 95 kv BIL:
More informationPFS Rotameter. Variable Area Flowmeter. Instruction Manual PFS-RM200, RM230, RM250
PFS Rotameter 09/2018 Rev. 0 Variable Area Flowmeter Instruction Manual PFS-RM200, RM230, RM250 Please note: This instruction manual provides detailed information and instructions that must be read, understood
More informationQT-III Cold Shrink Silicone Rubber
QT-III Cold Shrink Silicone Rubber 7600-T-3RJS Series 3/C Cabinet Termination Instructions Kit Contents: 3ÑSilicone Rubber Phase Re-jacketing Sleeve Assembly 3ÑCold Shrink Silicone Rubber Termination Assembly
More informationDODGE CUMMINS Air-Boss CR Intake Plenum
Installation Manual P/N 0307-ABIP 2003-07 DODGE CUMMINS Air-Boss CR Intake Plenum Installation Instructions P/N 0307-ABIP GDP Air-Boss CR Plenum Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING
More informationHydraulic Clutch Jack
Hydraulic Clutch Jack Operating Instructions & Parts Manual Model Number Atd-7404 Capacity 500 Lb. Atd Tools Inc. 160 Enterprise Drive, Wentzville MO 63385 Printed in China ATD7404-M0 05/07 Save these
More information