Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment

Size: px
Start display at page:

Download "Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment"

Transcription

1 EN Operation Manual: GFG-513 hand gun SB-E G Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment DESCRIPTION The GFG is a gravity feed hand spray gun suitable for use with most solvent based coating materials. Nozzles and needles are available in stainless steel or Nitralloy case hardened steel. Order gravity feed cup separately, see Accessories. IMPORTANT: These guns are not designed for use with highly corrosive or highly abrasive coating material and if used with such materials it must be expected that the need for thorough cleaning and/or the necessity for replacement parts will be increased. If there is any doubt regarding the suitability of a specific material, advise what material is to be used and/or submit a sample for test. MODEL GFG-513 Spray gun with air control valve. For ordering information see chart for the selection of air cap, nozzle and needle combinations. Add thread code for the hose connection thread required. Example: GFG-513 FF L 43 B Model No. Thread Code B = BSP, N = NPS Nozzle Size Nozzle Material L = Stainless Steel N = Nitralloy Steel Air Cap No. SPECIFICATIONS HOSE CONNECTION Thread Code MAXIMUM RECOMMENDED WORKING PRESSURES Air supply: B N Air supply: P1 = 9 bar (130 lbf/in 2). 1 / 4 " BSP 1 / 4 " NPS Weight: 635g. AC D DE E EE EX FF FJ FV FW FX FZ G Airflow Pressure l/min bar No. Order No. 30 MB X X X X X X X X AV X X X X X X X X AV X X X X X X X AV X X X X X X X X X X MB X MB X X X X X X X AV X X X X X MB X X

2 Nozzle No. Order No. Needle Order No. L=High Grade Stainless Steel - Hard Seat AV-1915-AC AV-645-AC JGA-421-C-K AV-1915-D AV-645-D JGA-421-DEX-K AV-1915-E AV-645-E JGA-421-E-K AV-1915-EX AV-645-EX JGA-421-DEX-K AV-1915-FF AV-645-FF JGA-421-FF-K AV-1915-FV AV-645-FV JGA-421-FV-K AV-1915-FW AV-645-FW JGA-421-FF-K AV-1915-FX AV-645-FX JGA-421-FX-K AV-1915-FZ AV-645-FZ JGA-421-FZ-K AV-1915-G AV-645-G JGA-421-G-K L=High Grade Stainless Steel - Soft Seat AV-4915-D AV-651-D JGA-421-DEX-K AV-4915-E AV-651-E JGA-421-E-K AV-4915-EX AV-651-EX JGA-421-DEX-K AV-4915-FF AV-651-FF JGA-421-FF-K AV-4915-FJ AV-651-FJ JGA-421-FZ-K AV-4915-FW AV-651-FW JGA-421-FF-K AV-4915-FX AV-651-FX JGA-421-FX-K AV-4915-FZ AV-651-FZ JGA-421-FZ-K AV-4915-G AV-651-G JGA-421-G-K N=Nitralloy Steel AV-115-AC AV-611-AC JGA-402-NAC-K AV-115-D AV-611-D JGA-402-NADEX-K AV-115-DE AV-611-DE JGA-402-NADEEE-K AV-115-EE AV-611-EE JGA-402-NADEEE-K AV-115-FF AV-611-FF JGA-402-NAFF-K AV-115-EE AV-611-EE JGA-402-NADEEE-K AV-115-FF AV-611-FF JGA-402-NAFF-K AV-115-FZ AV-611-FZ JGA-402-NAFZ-K Ref. No. Order No. Description Qty. 1 Chart 1 Air cap 1 *2 Chart 2 Nozzle 1 3 JGD-402 Baf e 1 *4 JGD-14-K5 Seal 1 *5 JGV-463-K5 Seal K3 Seal nut 1 7 GFG Valve assembly 2 8 JGV-264 -K5 Screw 1 9 JGS-35-K5 Stud 1 *10 Chart 2 Needle 1 *11 JGV-261-K5 Spring 1 *12 JGS-72-K5 Seal 2 13 JGA-17 Bushing 1 14 JGS-16 Screw 1 15 JGK-449 Valve assembly 1 16 JGS Valve 1 17 JGV-262-K5 Spring 1 18 JGS Trigger 1 19 JGA-158 Connecto1r 4" 1 20 GFG-6 Gun hook 1

3 INSTALLATION IMPORTANT: To ensure that this equipment reaches you in first class condition, protective coatings, rust inhibitors etc., have been used. Flush all equipment through with a suitable solvent before use to remove these agents from the material passages. 1. Mount gun hook (20) on a wall in a convenient position for the operator. 2. Install cup, ensure that the sealing washer is compressed. 3. Attach air hose to connector (19) from a filtered regulated air supply. Recommended air supply hose size, up to 10 metres long, 8 mm ( 5 16 ") bore. OPERATION 1. Mix, prepare and filter the coating material to be sprayed to the manufacturer s instructions. 2. Adjust the spray gun controls and air pressure before filling the cup or turning on the air supply. 2.1 Needle adjustment. Fully open needle adjusting screw (14) by turning counter-clockwise until the first thread shows. 2.2 Fan pattern valve A. Turn adjusting screw to fully open position, by turning counter-clockwise. 2.3 Air control valve B. Turn adjusting screw to fully open position, by turning counter-clockwise. 2.4 Air supply pressure. Regulate to 3.5 bar (50 lbf/in2). 3. Fill cup, DO NOT OVERFILL. Turn on air supply. 4. Test spray: If the finish is too dry or the application too slow, reduce the viscosity of the coating material. If the finish is too wet, reduce the coating material supply by turning the needle adjusting screw (14) fully clockwise then gradually open until the desired pattern is achieved. If the atomisation is too coarse increase the air pressure, if too fine, reduce the regulated air supply pressure or turn air control valve B gradually clockwise. NOTE The spray width can be reduced from fan to round by turning fan adjusting valve A clockwise. 5. Using the spray gun. 5.1 Hold the gun perpendicular to the spray surface always. Arcing or tilting the gun will result in an uneven deposit of coating material. The recommended spray distance is mm (6" - 8"). 5.2 Spray the corners and edges first. Overlap each stroke 50% as you coat the area. Trigger just before the edge of the surface to be sprayed. Move the gun at a constant speed across the surface and release the trigger. Repeat the same method on the return stroke. 5.3 To prevent accidental discharge of coating material, always turn off and release air pressure when the gun is not in use.

4 SAFETY WARNINGS FIRE AND EXPOSION Solvents and coating materials can be highly flammable or combustible, especially when sprayed. -Work stations must be provided with adequate ventilation/exhaust to prevent the build-up of flammable vapors. -Smoking and naked flames must not be allowed in the spraying or mixing areas. -Fire extinguishing equipment must be provided in the spraying and mixing areas. Users must comply with all local and national codes of practice and insurance company requirements governing ventilation, fire precautions, operation, maintenance and housekeeping of work stations. HALOGENATED HYDROCARBON SOLVENTS - for example 1,1,1-Trichloroethane and Methylene Chloride can chemically react with aluminium and galvanised or zinc coated parts and cause an explosion hazard. Read the label and data sheet of the material you intend to spray. This equipment, as supplied, is suitable for use with Halogenated Hydrocarbons and the user must ensure that all other equipment in the system is also suitable for use with these materials. DO NOT SPRAY MATERIALS CONTAINING THESE SOLVENTS EXCEPT WITH EQUIPMENT SPECIFICALLY DESIGNATED BY THE MANUFACTURER AS BEING SUITABLE FOR SUCH USE. STATIC ELECTRICITY - is generated by fluid moving through pipes and hoses. A static spark, capable of igniting certain solvents and coating materials, could be produced by high fluid flow rates. To prevent the risk of fire or explosion, earth continuity to the spray equipment and object being sprayed should be maintained. PERSONAL PROTECTIVE EUIPMENT TOXIC VAPOURS - when sprayed, certain materials may be poisonous, create irritation or otherwise be harmful to health. Always read carefully all labels and safety/performance data for the material being sprayed and follow any recommendations. IF IN DOUBT, CONSULT THE MATERIAL SUPPLIER. -The use of respiratory protective equipment is recommended at all times when spraying. The type of respiratory protective equipment used must be compatible with the material being sprayed and the level of concentration. -Always wear eye protection when spraying or cleaning the equipment. -Gloves must be worn for spraying or cleaning the equipment when certain coating materials and solvents are used. TRAINING Personnel should be given adequate training in the safe use and maintenance of this equipment. Training courses on all aspects of the equipment are available. For details contact your local representative. The instructions and safety precautions contained in this literature and the literature supplied with the coating material should be read and understood before the equipment is used. MISUSE -All spray guns project particles at high velocity and must never be aimed at any part of the body. -Never exceed the recommended safe working pressures for any of the equipment used. -The fitting of non-recommended or non-original accessories or spare parts may create hazardous conditions. -Before dismantling the equipment for cleaning or maintenance, all pressures, air and material must be isolated and released. The disposal of non-metallic materials must be carried out in an approved manner. Burning may generate toxic fumes. The removal of waste solvents and coating materials should be carried out by an authorised local waste disposal service. The materials used in the construction of this equipment are (bearing in mind the warning on Halogenated Hydracarbons) solvent resistant, enabling the equipment to be cleaned using gun washing machines. However, this equipment must not be left inside the gun washing machine for prolonged periods of time after the automatic cleaning cycle has been completed. The solvents used in the gun washing machine should be regularly checked to ensure that the equipment is not flushed through with contaminated material. Follow the recommendations of the machine manufacturer. NOISE LEVELS The continuous A-weighted sound pressure level of this spray gun may exceed 85 db(a) depending on the air cap/fluid tip set-up being used. Sound levels are measured using an impulse sound level meter and analyser, when the gun is being used in a normal spraying application. Details of actual noise levels produced by the various air cap/fluid tip set-ups are available on request.

5 PREVENTIVE MAINTENANCE CLEANING 1. Turn off air supply and release pressure before disconnecting gun. 2. Empty coating material from cup and clean. 3. Remove air cap and clean by immersing in solvent, brush or wipe clean. If any holes in the air cap are blocked use a toothpick or broom straw to remove the obstruction. Never use a steel wire or hard implement which will damage the air cap and result in a distorted pattern. LUBRICATION Oil daily, the trigger stud (9), air valve stem (16) where it enters the valve body and the needle (10) where it enters the seal nut (6). REPLACEMENT OF PARTS NOZZLE (2) AND NEEDLE (10). Remove parts in the following order (14, 11, 10, 1, 2, 3 and 4). Replace any worn or damaged parts. Reassemble in reverse order. Recommended tightening torque for nozzle (2) Nm ( lbf in). NEEDLE SEAL (5). Remove parts (14, 11, 10, 8, 9 and 18). Unscrew seal nut (6) and remove seal (5). Fit new seal (5), replace seal nut (6) finger tight. Assemble parts (10, 11, 14, 18, 9 and 8). Adjust screw (14) to fully open position. Tighten nut (6) with spanner sufficiently to seal but not to impede free needle (10) movement. AIR VALVE (15). Remove parts (8, 9 and 18), unscrew valve (15) and remove seal (12). Replace worn or damaged parts. Reassemble, fit spring (17) to valve head (16) and position seal (12). Carefully screw complete valve into gun body and tighten. Refit parts (18, 9 and 8). CONNECTOR (19) Remove connector (19) and clean threads in gun body. Apply a medium strength thread locking/sealing compound to the external chamfer and threads of the new connector. Screw into gun body and tighten. Recommended torque: 20 Nm (180 lbf in). VALVE (7). Caution: Always ensure that the fan and air control valves (7) are in the fully open position by turning the screw counterclockwise before fitting to the gun body. ACCESSORIES Gravity Feed Cups: Capacity 550 ml. High grade Stainless Steel. The lid is fitted with a drip check to prevent coating material leakage from vent hole. Order GFC-501: Constructed from durable acetal for use with most solvent based and waterbourne coating materials. Order GFC-511: Constructed from polyester for use as above, but in addition is also suitable for use with acid base 2 component primers using sulphuric acid. Service kit: Order KK-4502 add nozzle size required. Example: KK-4502-FFH. Components in Parts List marked with * are included in the kit. Service kit: Order KK-4558 gaskets and seals. (Contains ref no s 4,5,12) Mini-Kit: Order KK-4503 contains part Ref. No s. 4, 5, 8, 9 and 11. Disposable air filter Order: HAF-507 a light weight low pressure drop filter that removes oil and water particles. Attaches to the handle of the gun, thread size 1 4" BSP. Multipurpose spanner: Order SPN-5. Contains necessary sizes for maintenance and hose connections. Cleaning brush: Order K3 for cleaning threads and recesses of gun.

6 SERVICE CHECKS CONDITION NORMAL SPRAY PATTERN B C F Fluttering Spray D G Fluid leakage from packing nut A Will not spray E H Dripping from nozzle CAUSE CORRECTION A 1. No pressure at the gun. 1. Check air supply. 2. Screw (14) not properly adjusted. 2. Adjust. B & C 1. Material build-up on air cap/nozzle. 1. Clean air cap/nozzle. D & E 1. Coating material flow or viscosity incorrect. 1. Adjust screw (14), or reduce viscosity. F 1. Insufficient material in cup. 1. Fill cup. 2. Gun material passage blocked. 2. Clean. 3. Worn seal (5). 3. Replace. 4. Loose or damaged nozzle (2). 4. Tighten or replace. G 1. Seal (5) worn or seal nut (6) loose. 1. Replace seal or tighten nut. H 1. Worn or dry seal (5). 1. Replace or lubricate. 2. Worn or damaged nozzle (2) or needle (10). 2. Replace WARRANTY This product is covered by Finishing Brands UK Limited one year warranty. Finishing Brands UK Limited, Ringwood Road, Bournemouth, BH11 9LH, UK. Tel.No: Fax No: Website address: Registered office: Finishing Brands UK Limited, 400, Capability Green, Luton, Bedfordshire, LU1 3AE, UK. Registered in England No: Vat No: GB

Operation Manual JGA Pressure Feed Spraygun

Operation Manual JGA Pressure Feed Spraygun EN SB-E-2-251 ISSUE.06 Operation Manual JGA Pressure Feed Spraygun 1 Table of Contents Topic Page Operational Description 3 Part Numbers 3 EC Declaration of Conformity 3 Safety Warnings 4 Chart 1 Air Caps,

More information

Operation Manual FLG-G5 Transtech Gravity Spray Gun SB-E ISS.05

Operation Manual FLG-G5 Transtech Gravity Spray Gun SB-E ISS.05 Operation Manual FLG-G5 Transtech Gravity Spray Gun SB-E-2-790 ISS.05 Operation Manual FLG5 Gravity-feed Spray Gun Important Read and follow all instructions and Safety Precautions before using this equipment

More information

APOLLO-L Spray Gun Operation Manual

APOLLO-L Spray Gun Operation Manual APOLLO-L Spray Gun Operation Manual Important:Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment. Retain for future reference. The gun body of this model is finished with

More information

Operation Manual GTi Pressure Feed Spraygun

Operation Manual GTi Pressure Feed Spraygun Operation Manual GTi Pressure Feed Spraygun SB-E-2-362-C E P 1-8 1 ITW Ltd 2000 E Operation Manual GTi Pressure Feed Spraygun Important Read and follow all instructions and Safety Precautions before using

More information

SB-E-2-CBA1 ISS.13. Operation Manual Cobra 1 Automatic Spray Gun

SB-E-2-CBA1 ISS.13. Operation Manual Cobra 1 Automatic Spray Gun EN SB-E-2-CBA1 ISS.13 Operation Manual Cobra 1 Automatic Spray Gun Operation Manual Cobra 1 Automatic Spraygun Important Read and follow all instructions and Safety Precautions before using this equipment

More information

OPERATION MANUAL FLG-G5-14 Transtech Gravity Spraygun

OPERATION MANUAL FLG-G5-14 Transtech Gravity Spraygun SB-E-2-790 ISS.02 OPERATION MANUAL FLG-G5-14 Transtech Gravity Spraygun E P 1-8 E Operation Manual FLG5 Gravity Feed Spraygun Important Read and follow all instructions and Safety warnings before using

More information

Operation Manual GTi Pressure Feed Spraygun

Operation Manual GTi Pressure Feed Spraygun SB-E-2-362 ISS.05 Operation Manual GTi Pressure Feed Spraygun E P 1-8 Operation Manual GTi Pressure Feed Spraygun Important Read and follow all instructions and Safety Precautions before using this equipment

More information

Operation Manual Advanced - Conventional Gravity Feed Spraygun

Operation Manual Advanced - Conventional Gravity Feed Spraygun SB-E-2-534 ISS.06 Operation Manual Advanced - Conventional Gravity Feed Spraygun E P 1 12 Operation Manual COMPACT Gravity Feed Spraygun Important Read and follow all instructions and Safety Precautions

More information

Operation Manual BINKS 460 Automatic Spray Gun

Operation Manual BINKS 460 Automatic Spray Gun SB-E-2-150 ISS.01 Operation Manual BINKS 460 Automatic Spray Gun E P 1 12 1 Operation Manual 460 Automatic Spraygun Important Read and follow all instructions and Safety Precautions before using this equipment

More information

SB ISS.04. Operation Manual AGMDPRO Automatic Spray Gun

SB ISS.04. Operation Manual AGMDPRO Automatic Spray Gun EN SB-2-991 ISS.04 Operation Manual AGMDPRO Automatic Spray Gun Table of Contents Topic Page Specification and Materials of Construction 3 EC Declaration of Conformity 3 Safety Precautions 4 Model Part

More information

Operation Manual Cobra 1 Automatic Spray Gun

Operation Manual Cobra 1 Automatic Spray Gun SB-E-2-CBA1 ISS.06 Operation Manual Cobra 1 Automatic Spray Gun E P 1 12 1 Operation Manual Cobra 1 Automatic Spraygun Important Read and follow all instructions and Safety Precautions before using this

More information

SB-E ISS.05. Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun

SB-E ISS.05. Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun EN SB-E-2-740 ISS.05 Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun Contents Page 1 - Specification & Materials of construction... 3 2 - SAFETY WARNINGS... 4 3 - Model part numbers...

More information

Operation Manual FLG-S5-18 Transtech Suction-feed Spray Gun

Operation Manual FLG-S5-18 Transtech Suction-feed Spray Gun SB--2-791 ISS.04 Operation Manual FLG-S5-18 Transtech Suction-feed Spray Gun P 2 8 Operation Manual FLG5 Suction-feed Spray Gun Important Read and follow all instructions and Safety Precautions before

More information

Operation Manual: Gti -A Automatic Gun

Operation Manual: Gti -A Automatic Gun Operation Manual: Gti -A Automatic Gun Important: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment SB-E-2-366-F DESCRIPTION The GTI-A is a production spray gun suitable

More information

EN SB-E ISS.05. Technical Bulletin JGA HD range of Suction and Pressure feed Spray Guns

EN SB-E ISS.05. Technical Bulletin JGA HD range of Suction and Pressure feed Spray Guns EN SB-E-2-821 ISS.05 Technical Bulletin JGA HD range of Suction and Pressure feed Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information

SB-E ISS.07. ADVANCE HD range of CONVENTIONAL Suction and Pressure feed Spray Guns

SB-E ISS.07. ADVANCE HD range of CONVENTIONAL Suction and Pressure feed Spray Guns EN SB-E-2-973 ISS.07 ADVANCE HD range of CONVENTIONAL Suction and Pressure feed Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information

EN SB-E ISS.03. Technical Bulletin GFG HD Gravity Spray Gun

EN SB-E ISS.03. Technical Bulletin GFG HD Gravity Spray Gun EN SB-E-2-811 ISS.03 Technical Bulletin GFG HD Gravity Spray Gun Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents 4 Construction Features

More information

Technical Bulletin GTIPRO LITE G HVLP and High Efficiency Gravity Spray Gun (For Industry)

Technical Bulletin GTIPRO LITE G HVLP and High Efficiency Gravity Spray Gun (For Industry) EN SB-E-2-856 ISS.03 Technical Bulletin GTIPRO LITE G HVLP and High Efficiency Gravity Spray Gun (For Industry) Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description

More information

SB-E ISS.04. Technical Bulletin ADVANCE HD HVLP and Trans-tech Gravity Spray Gun

SB-E ISS.04. Technical Bulletin ADVANCE HD HVLP and Trans-tech Gravity Spray Gun EN SB-E-2-970 ISS.04 Technical Bulletin ADVANCE HD HVLP and Trans-tech Gravity Spray Gun Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information

SB-E ISS.01. Technical Bulletin GTIPRO LITE HVLP and High Efficiency Gravity Spray Gun

SB-E ISS.01. Technical Bulletin GTIPRO LITE HVLP and High Efficiency Gravity Spray Gun EN SB-E-2-843 ISS.01 Technical Bulletin GTIPRO LITE HVLP and High Efficiency Gravity Spray Gun Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information

SB-E US. Operation Manual GTI W Trans-Tech Gravity Spray Gun

SB-E US. Operation Manual GTI W Trans-Tech Gravity Spray Gun SB--2-360-US Operation Manual GTI W Trans-Tech Gravity Spray Gun Operation Manual GTI W Trans-Tech Gravity- Feed Spray Gun Important Read and follow all instructions and Safety Precautions before using

More information

GTI PRO LITE HVLP & LVMP Operation Manual

GTI PRO LITE HVLP & LVMP Operation Manual GTI PRO LITE HVLP & LVMP Operation Manual 1 Table of Contents EC DECLARATION OF CONFORMITY... 3 PART NUMBERS... 3 OPERATIONAL DESCRIPTION... 3 KIT CONTENTS (ALL MODELS)... 4 CONSTRUCTION FEATURES... 4

More information

SB-E ISS.01. Technical Bulletin GTIPRO LITE HVLP and High Efficiency Suction and Pressure Spray Guns

SB-E ISS.01. Technical Bulletin GTIPRO LITE HVLP and High Efficiency Suction and Pressure Spray Guns EN SB-E-2-845 ISS.01 Technical Bulletin GTIPRO LITE HVLP and High Efficiency Suction and Pressure Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description

More information

Technical Bulletin PRO range of Gravity Spray Guns for Primer, Basecoat and Clearcoat

Technical Bulletin PRO range of Gravity Spray Guns for Primer, Basecoat and Clearcoat EN AUTOMOTIVE REFINISHING SB-E-2-450 ISS.09 Technical Bulletin PRO range of Gravity Spray Guns for Primer, Basecoat and Clearcoat Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers

More information

USE and MAINTENANCE INSTRUCTION MANUAL AZ3 HTE2 AZ3 HTE2 HVLP GRAVITY. SPRAY GUN Series. en it fr es pt de se

USE and MAINTENANCE INSTRUCTION MANUAL AZ3 HTE2 AZ3 HTE2 HVLP GRAVITY. SPRAY GUN Series. en it fr es pt de se USE and MAINTENANCE INSTRUCTION MANUAL AZ3 HTE2 AZ3 HTE2 HVLP GRAVITY SPRAY GUN Series en it fr es pt de se TECHNICAL DATA Technical AZ3 HTE2 AZ3 HTE2 HVLP 1.0 80 180 1.3 10-15HTE 140 200 240 1.5 2.0 160

More information

USE and MAINTENANCE INSTRUCTION MANUAL W-300 W-300 WB LPH-300 GRAVITY. SPRAY GUN Series. en it fr es pt de se

USE and MAINTENANCE INSTRUCTION MANUAL W-300 W-300 WB LPH-300 GRAVITY. SPRAY GUN Series. en it fr es pt de se USE and MAINTENANCE INSTRUCTION MANUAL W-300 W-300 WB LPH-300 GRAVITY SPRAY GUN Series en it fr es pt de se TECHNICAL DATA High T.E.C. series Nozzle_Needle set Combination W-300 WB W-300 W-300-081G 0.8

More information

Technical Bulletin GTi PRO Gravity Spray Gun

Technical Bulletin GTi PRO Gravity Spray Gun AUTOMOTIVE REFINISHING Technical Bulletin GTi PRO Gravity Spray Gun SB-E-2-450 ISS.02 Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents 4

More information

ATD-6810 SPRAY GUN W/CUP INSTRUCTION MANUAL

ATD-6810 SPRAY GUN W/CUP INSTRUCTION MANUAL ATD-6810 SPRAY GUN W/CUP INSTRUCTION MANUAL Read this Instruction Manual carefully and understand it completely, basic precaution should be strictly followed to prevent the damage to the tool and injury

More information

SB-E ISS.01. Technical Bulletin HD range of Gravity Spray Guns

SB-E ISS.01. Technical Bulletin HD range of Gravity Spray Guns EN SB-E-2-451 ISS.01 Technical Bulletin HD range of Gravity Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents 4 Construction Features

More information

T-AGPZ-F158/F159/F208/F209/S8/S9 COMPACT AUTO. GUN Operation Manual

T-AGPZ-F158/F159/F208/F209/S8/S9 COMPACT AUTO. GUN Operation Manual T-AGPZ-F158/F159/F208/F209/S8/S9 COMPACT AUTO. GUN Operation Manual Important:Read and follow all instructions and SAFETY PRES before using this equipment. DESCRIPTION T-AGPZ GUN is a low flow rate automatic

More information

Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun

Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun SB-E-2-740 ISS.01 Operation Manual AA4400A Automatic Air Assisted Airless Spray Gun Contents Page 1 - Specification & Materials of construction... 2 2 - SAFETY WARNINGS... 3 3 - Model part numbers... 4

More information

ATD MM PRIMER GUN W/CUP INSTRUCTION MANUAL

ATD MM PRIMER GUN W/CUP INSTRUCTION MANUAL ATD-6902 1.8MM PRIMER GUN W/CUP INSTRUCTION MANUAL Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury and/or

More information

ATD MM TOUCH UP GUN W/CUP INSTRUCTION MANUAL

ATD MM TOUCH UP GUN W/CUP INSTRUCTION MANUAL ATD-6903 1.0MM TOUCH UP GUN W/CUP INSTRUCTION MANUAL Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury and/or

More information

COMPACT-CONVENTIONAL GRAVITY FEED SPRAYGUN

COMPACT-CONVENTIONAL GRAVITY FEED SPRAYGUN SERVICE MANUAL EN COMPACT-CONVENTIONAL GRAVITY FEED SPRAYGUN IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand this manual. Contact

More information

SB-E ISS.03. ADVANCE HD range of CONVENTIONAL Suction and Pressure feed Spray Guns

SB-E ISS.03. ADVANCE HD range of CONVENTIONAL Suction and Pressure feed Spray Guns EN SB-E-2-973 ISS.03 ADVANCE HD range of CONVENTIONAL Suction and Pressure feed Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information

SB-E ISS.01. Technical Bulletin GTI HD range of Suction and Pressure feed Spray Guns

SB-E ISS.01. Technical Bulletin GTI HD range of Suction and Pressure feed Spray Guns EN SB-E-2-831 ISS.01 Technical Bulletin GTI HD range of Suction and Pressure feed Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information

MGFHVLP. Instructions/Parts. Mini Gravity Feed System E. Part No Includes MGFHVLP Mini Gravity Feed Spray Gun and MGC 125 Gravity Cup.

MGFHVLP. Instructions/Parts. Mini Gravity Feed System E. Part No Includes MGFHVLP Mini Gravity Feed Spray Gun and MGC 125 Gravity Cup. Instructions/Parts MGFHVLP Mini Gravity Feed System FOR PRODUCT INFORMATION CALL: 1-800-742-7731 309989E For gravity feed spraying of automotive colors and clears. Ideal for touch-up and detail work. Important

More information

ATD PIECE HVLP SPRAY GUN SET INSTRUCTION MANUAL

ATD PIECE HVLP SPRAY GUN SET INSTRUCTION MANUAL ATD-6904 6 PIECE HVLP SPRAY GUN SET INSTRUCTION MANUAL Read this manual carefully and understand it completely. Retain manual for future use. Always follow safety precautions to prevent personal injury

More information

GRAVITY FEED SPRAY GUN & CUP SPECIFICATIONS. Operating Instructions Warning Information Parts Breakdown. Fluid Orifice mm. Air Inlet:...

GRAVITY FEED SPRAY GUN & CUP SPECIFICATIONS. Operating Instructions Warning Information Parts Breakdown. Fluid Orifice mm. Air Inlet:... Operating Instructions Warning Information Parts Breakdown SPECIFICATIONS Fluid Orifice... 1.4mm Air Inlet:...1/4 NPT Rec. Max. Inlet Pressure:...50 PSI CFM:... 3.1 at 50 PSI Nozzle Pressure... 10 PSI

More information

Operation Manual DVP 1:1 ratio Pneumatic Diaphragm Pump

Operation Manual DVP 1:1 ratio Pneumatic Diaphragm Pump SB-E-15-DVP-H 03/2007. Operation Manual DVP 1:1 ratio Pneumatic Diaphragm Pump E P 1 13 2008 ITW Industrial Finishing Operation Manual DVP 1:1 Ratio Pneumatic Diaphragm Pump Important Read and follow all

More information

D Instructions/Parts. Siphon Feed Detail Spray Gun D

D Instructions/Parts. Siphon Feed Detail Spray Gun D Instructions/Parts D-5-55 Siphon Feed Detail Spray Gun FOR PRODUCT INFORMATION CALL: 1-800-742-7731 309991D Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

More information

Airless Spray Gun INSTRUCTIONS DP psi (345 bar) Maximum Working Pressure

Airless Spray Gun INSTRUCTIONS DP psi (345 bar) Maximum Working Pressure INSTRUCTIONS DP-6376 Airless Spray Gun 5000 psi (345 bar) Maximum Working Pressure INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Table of Contents Warnings......................................

More information

ATTENTION! READ BEFORE ATTACHING THE AIR HOSE

ATTENTION! READ BEFORE ATTACHING THE AIR HOSE Binks SV50 HVLP GRAVITY FEED SPRAY GUN & TOUCHUP GUN ATTENTION READ BEFORE ATTACHING THE AIR HOSE HVLP AIR SUPPLY REQUIREMENTS FULL SIZE GUN: 30 PSI inlet pressure provides 10 PSI at the air cap. Consumes

More information

Service Bulletin SB Replaces SB Technical Bulletin. Compact MINI range of Gravity Spray Guns for spot repairs and small areas

Service Bulletin SB Replaces SB Technical Bulletin. Compact MINI range of Gravity Spray Guns for spot repairs and small areas EN Service Bulletin Replaces Technical Bulletin Compact MINI range of Gravity Spray Guns for spot repairs and small areas Page 2 Table of Contents Topic Page EC Declaration of Conformity.................................................

More information

FLG-615 AND FLG-635 SPRAY GUN AND GFC-502 CUP

FLG-615 AND FLG-635 SPRAY GUN AND GFC-502 CUP SERVICE BULLETIN SB-2-605-F Replaces SB-2-605-E Gun Repair Kit FLG-480 FLG-615 AND FLG-635 SPRAY GUN AND GFC-502 CUP IMPORTANT: Before using this equipment, read all safety precautions on page 2 and instructions.

More information

DEVILBISS GTi Pro. HVLP and High Efficiency. Gravity Spray Gun II 2 G X

DEVILBISS GTi Pro. HVLP and High Efficiency. Gravity Spray Gun II 2 G X SERVICE MANUAL DEVILBISS GTi Pro HVLP and High Efficiency Gravity Spray Gun II 2 G X IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel read and understand

More information

DEVILBISS GTI Pro Lite. HVLP and High Efficiency. Suction and Pressure Spray Guns

DEVILBISS GTI Pro Lite. HVLP and High Efficiency. Suction and Pressure Spray Guns SERVICE MANUAL DEVILBISS GTI Pro Lite HVLP and High Efficiency Suction and Pressure Spray Guns II 2 G X IMPORTANT! DO NOT DESTROY It is the Customer's responsibility to have all operators and service personnel

More information

EGA-503 SPRAY GUN (SPRAY PISTOL)

EGA-503 SPRAY GUN (SPRAY PISTOL) SERVICE MANUAL EN *Repair Kit No. KK-5044 (190681) EGA-503 SPRAY GUN (SPRAY PISTOL) Important: Before using this equipment, read all safety precautions and instructions. Keep for future use. DESCRIPTION

More information

Model No. SP Low Volume Low Pressure (LVLP) Gravity Feed Spray Gun

Model No. SP Low Volume Low Pressure (LVLP) Gravity Feed Spray Gun Model No. SP-33000 Low Volume Low Pressure (LVLP) Gravity Feed Spray Gun - 1 - TABLE OF CONTENTS: 1. Description 2. Specification and Technical Data 3. Important Safety Instruction 4. Instructions for

More information

Operating Manual for FINE-SPRAY gun W 3/FZ-Duo

Operating Manual for FINE-SPRAY gun W 3/FZ-Duo Operating Manual for FINE-SPRAY gun W 3/FZ-Duo Read this manual carefully before installing, operating or servicing this spray gun. Keep always handy for further use. 1 Introduction The FINE-SPRAY gun

More information

INSTRUCTIONS. US Patent Pending HVLP Turbine Guns

INSTRUCTIONS. US Patent Pending HVLP Turbine Guns INSTRUCTIONS 309317 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. A US Patent Pending HVLP Turbine Guns 10 psi (0.07 MPa,.7 bar) Maximum Inlet

More information

H2O-C14 AAA FINE FINISH SERIES PUMP OUTFIT

H2O-C14 AAA FINE FINISH SERIES PUMP OUTFIT PRODUCT INFORMATION H2O-C14 AAA FINE FINISH SERIES PUMP OUTFIT The H2O-C14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to

More information

T1-Titanium Non-HVLP Spray Gun

T1-Titanium Non-HVLP Spray Gun T1-Titanium Non-HVLP Spray Gun THE SPRAY GUN PEOPLE FOR PRODUCT INFORMATION CALL: 1-800-742-7731 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

More information

JGA-503 CONVENTIONAL SPRAY GUN

JGA-503 CONVENTIONAL SPRAY GUN SERVICE BULLETIN SB-2-253-I Replaces SB-2-253-H Major Repair Kit KK-4987-2 Minor Repair Kit KK-5034 JGA-503 CONVENTIONAL SPRAY GUN IMPORTANT: Before using this equipment, read all safety precautions and

More information

LINE PAINT SPRAY GUN VERFPISTOOL INSTRUCTION MANUAL HANDLEIDING FAT-0111 FAT-0111 EN NL. Zhong Nan Trading CO., Gompertsstraat nr.

LINE PAINT SPRAY GUN VERFPISTOOL INSTRUCTION MANUAL HANDLEIDING FAT-0111 FAT-0111 EN NL. Zhong Nan Trading CO., Gompertsstraat nr. Operation manual and security instructions inside the box. Use safety glasses. Keep this tool away from children. Ford Motor Company trademarks and trade dress used under license to Nine HKG, Ltd. fordmotorcompany.com

More information

SPRAY GUN OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE.

SPRAY GUN OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPRAY GUN OWNER S MANUAL FOR YOUR SAFETY PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE USE. SPECIFICATION TOOL MODEL REQUIRED AIR CFM NOZZLE MIX OPERATING PRESSURE TOOL WEIGHT SAT501

More information

B14 AAA FINE FINISH SERIES PUMP OUTFIT

B14 AAA FINE FINISH SERIES PUMP OUTFIT PRODUCT INFORMATION B14 AAA FINE FINISH SERIES PUMP OUTFIT The B14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to produce

More information

AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS

AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS SERVICE BULLETIN Replaces SB-2-624-G Repair Kit KK-4992-1 AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS IMPORTANT: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment.

More information

M1-G HIGH VOLUME LOW PRESSURE (HVLP) GRAVITY FEED SPRAY GUN

M1-G HIGH VOLUME LOW PRESSURE (HVLP) GRAVITY FEED SPRAY GUN Service Bulletin Replaces SBBI-2-181-A Repair Kit 54-4367-1 M1-G HIGH VOLUME LOW PRESSURE (HVLP) GRAVITY FEED SPRAY GUN GUN GUN FLUID NOZZLE AIR NOZZLE FLUID NEEDLE ASSEMBLY INLET MARKINGS PART NO. MARKINGS

More information

B14 AAA FINE FINISH SERIES PUMP OUTFIT

B14 AAA FINE FINISH SERIES PUMP OUTFIT PRODUCT INFORMATION B14 AAA FINE FINISH SERIES PUMP OUTFIT The B14 AAA pump system is an air assisted airless unit which combines airless and conventional or HVLP air atomization technologies to produce

More information

.6 Liter (20 oz.) Touch Up Spray Gun 126-A

.6 Liter (20 oz.) Touch Up Spray Gun 126-A .6 Liter (20 oz.) Touch Up Spray Gun 126-A Usage Instructions & Parts List www.fibreglast.com 1.800.821.3283 385 Carr Drive Brookville, OH 45309 Operating Instructions & Suggestions This is a heavy duty

More information

EXL-620G HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUNS

EXL-620G HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUNS SERVICE BULLETIN Replaces SB-2-202-E Repair Kit KK-5058-2 EXL-620G HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUNS IMPORTANT: Before using this equipment, read all safety precautions and instructions.

More information

GFG-517 GRAVITY FEED HIGH VOLUME LOW PRESSURE SPRAY GUN

GFG-517 GRAVITY FEED HIGH VOLUME LOW PRESSURE SPRAY GUN SERVICE BULLETIN SB-2-169-D Replaces SB-2-169-C Repair Kit KK-5025 GFG-517 GRAVITY FEED HIGH VOLUME LOW PRESSURE SPRAY GUN IMPORTANT: Before using this equipment, read all safety precautions and instructions.

More information

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model

More information

SERVICE MANUAL KK-5051 DISPOSABLE KB II CUP LINER

SERVICE MANUAL KK-5051 DISPOSABLE KB II CUP LINER SERVICE MANUAL KK-5051 DISPOSABLE KB II CUP LINER SB-4-207-G (11/2015) 1 / 8 IMPORTANT: Read and follow all instructions and SAFETY PRECAUTIONS on Pages 1 and 4 before using this equipment. Retain for

More information

High-performance automatic spray gun AGMD

High-performance automatic spray gun AGMD EN AUTOMOTIVE REFINISHING ISS.03 High-performance automatic spray gun For conventional atomisation: For Trans-Tech or HVLP atomisation: -514-515 Operating instruction Table of contents 1 General... 3 1.1

More information

AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS

AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS SERVICE BULLETIN Replaces SB-2-624-M Repair Kit KK-4992-1 AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS IMPORTANT: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment.

More information

IMPORTANT! DO NOT DESTROY

IMPORTANT! DO NOT DESTROY SERVICE MANUAL EN FLG4 GRAVITY FEED SPRAY GUN AND DEKUPS DISPOSABLE CUP SYSTEM MODELS: FLG-CNG-115 AND FLG-HVG-315 GUN DESCRIPTION The FLG4 is a light weight, general purpose gravity feed spray gun for

More information

Model 95G Gravity Feed Spray Gun 6119-XXXX-X

Model 95G Gravity Feed Spray Gun 6119-XXXX-X Model 95G Gravity Feed Spray Gun 6119-XXXX-X Introduction This unique spray gun is engineered with sprayer comfort, operating simplicity, and paint usage efficiency in mind. Ideal for automotive refinishing,

More information

GTI-600G AND GTI-620G COMPLIANT HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUNS

GTI-600G AND GTI-620G COMPLIANT HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUNS SERVICE BULLETIN SB-2-168-E Replaces SB-2-168-D Repair Kit KK-5058 GTI-600G AND GTI-620G COMPLIANT HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUNS IMPORTANT: Before using this equipment, read all safety

More information

FLG3 GRAVITY FEED SPRAY GUN AND CUP MODELS: FLG-691 and FLG-695

FLG3 GRAVITY FEED SPRAY GUN AND CUP MODELS: FLG-691 and FLG-695 IMPORTANT: Before using this equipment, read all safety precautions on page 2 and instructions. Keep for future use. GUN DESCRIPTION The FLG3 is a light weight, general purpose gravity feed spray gun for

More information

GFG-670 PLUS TM HIGH EFFICIENCY GRAVITY FEED SPRAY GUN

GFG-670 PLUS TM HIGH EFFICIENCY GRAVITY FEED SPRAY GUN SERVICE BULLETIN SB-2-194-F Replaces SB-2-194-E Repair Kit KK-5058-2 GFG-670 PLUS TM HIGH EFFICIENCY GRAVITY FEED SPRAY GUN IMPORTANT: Before using this equipment, read all safety precautions and instructions.

More information

Model 95G Gravity Feed Spray Gun

Model 95G Gravity Feed Spray Gun Model 95G Gravity Feed Spray Gun INTRODUCTION This unique spray gun is engineered with sprayer comfort, operating simplicity, and paint usage efficiency in mind. Ideal for automotive refinishing, test

More information

PRI-601G HIGH VOLUME LOW PRESSURE GRAVITY FEED PRIMER GUN

PRI-601G HIGH VOLUME LOW PRESSURE GRAVITY FEED PRIMER GUN SERVICE BULLETIN Replaces SB-2-200-C Repair Kit KK-5058-2 PRI-601G HIGH VOLUME LOW PRESSURE GRAVITY FEED PRIMER GUN IMPORTANT: Before using this equipment, read all safety precautions and instructions.

More information

SB-E ISS.06. ADVANCE HD range of HVLP and TRANSTECH Suction and Pressure feed Spray Guns

SB-E ISS.06. ADVANCE HD range of HVLP and TRANSTECH Suction and Pressure feed Spray Guns SB-E-2-971 ISS.06 ADVANCE HD range of HVLP and TRANSTECH Suction and Pressure feed Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information

GTI HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUN

GTI HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUN SERVICE BULLETIN Replaces SB-2-168-M Repair Kit KK-5058-2 GTI HIGH VOLUME LOW PRESSURE GRAVITY FEED SPRAY GUN #2000 Millennium Air Cap PSI / CFM Information INLET CAP PRESSURE PRESSURE at handle fan fully

More information

AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS

AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS SERVICE MANUAL EN AGX-550, AGX-552 & AGX-553 AUTOMATIC SPRAY GUNS IMPORTANT: Read and follow all instructions and SAFETY PRECAUTIONS before using this equipment. Retain for future reference. DESCRIPTION

More information

Corrosion Control Equipment and Supplies

Corrosion Control Equipment and Supplies Distributed by: Corrosion Control Equipment and Supplies Houston Office: 248 McCarty Dr. Houston, TX 77029-1195 (713) 672-8251 Fax (713) 672-6636 1-800-CLEMTEX www.clemtex.com clemtex@clemtex.com Dallas

More information

INSTRUCTIONS This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE

INSTRUCTIONS This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE INSTRUCTIONS 307 378 INSTRUCTIONS This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. H Supersedes G Model 600 Air Spray Gun 100 psi (7 bar) Maximum Working Fluid

More information

HIGH EFFICIENCY GRAVITY FEED SPRAY GUN

HIGH EFFICIENCY GRAVITY FEED SPRAY GUN SERVICE MANUAL EN GFG-670 PLUS HIGH EFFICIENCY GRAVITY FEED SPRAY GUN IMPORTANT: Before using this equipment, read all safety precautions and instructions. Keep for future use. DESCRIPTION The standard

More information

WARRANTY. Illustration

WARRANTY. Illustration WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie

More information

Conventional Series Features and Benefits

Conventional Series Features and Benefits Conventional Series Features and Benefits Durability 1 300-grade stainless steel fluid passages offer waterborne compatibility, 4 Trigger is designed with reinforced wear points. corrosion resistance and

More information

EXL-520S HIGH VOLUME LOW PRESSURE SUCTION FEED SPRAY GUNS

EXL-520S HIGH VOLUME LOW PRESSURE SUCTION FEED SPRAY GUNS SERVICE BULLETIN SB-2-496-C Replaces SB-2-496-B Repair Kit KK-5058-2 EXL-520S HIGH VOLUME LOW PRESSURE SUCTION FEED SPRAY GUNS IMPORTANT: Before using this equipment, read all safety precautions and instructions.

More information

1.7MM GRAVITY FEED SPRAY GUN & CUP SPECIFICATIONS

1.7MM GRAVITY FEED SPRAY GUN & CUP SPECIFICATIONS 90045_op man_041003 4/18/03 1:59 PM Page 1 Operating Instructions Warning Information Parts Breakdown Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains

More information

Instructions Parts List

Instructions Parts List Instructions Parts List ACETAL Husky 515 Air Operated Dual Inlet Diaphragm Pump Used to evacuate and transfer fluids. 100 psi (0.7 MPa, 7 bar) Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum

More information

Binks Model M1-G HVLP GRAVITY FEED SPRAY GUN

Binks Model M1-G HVLP GRAVITY FEED SPRAY GUN Binks Model M1-G HVLP GRAVITY FEED SPRAY GUN The Binks M1-G HVLP Gravity Feed Gun is a high quality sprayer that produces fine finish for compliant and non-compliant areas. A superbly balanced forged aluminum

More information

Professional Gravity Feed Basecoat Spray Gun

Professional Gravity Feed Basecoat Spray Gun TECHNICAL BULLETIN EN Professional Gravity Feed Basecoat Spray Gun Gun Repair Kit No. 702736 askus@carlisleft.com 800.445.3988 www.autorefinishdevilbiss.com TB-1018-R1 (2/2018) 1 / 16 www.carlisleft.com

More information

JGA-510 CONVENTIONAL SPRAY GUN

JGA-510 CONVENTIONAL SPRAY GUN JGA-510 CONVENTIONAL SPRAY GUN SERVICE BULLETIN SB-2-252-H Replaces SB-2-252-G Major Repair Kit KK-4987-2 Minor Repair Kit KK-5034 IMPORTANT: Before using this equipment, read all safety precautions and

More information

JGA-510 CONVENTIONAL SPRAY GUN

JGA-510 CONVENTIONAL SPRAY GUN JGA-510 CONVENTIONAL SPRAY GUN SERVICE BULLETIN SB-2-252-G Replaces SB-2-252-F Major Repair Kit KK-4987-2 Minor Repair Kit KK-5034 IMPORTANT: Before using this equipment, read all safety precautions and

More information

JGA-504 CONVENTIONAL SPRAY GUN

JGA-504 CONVENTIONAL SPRAY GUN SERVICE BULLETIN SB-2-259-B Replaces SB-2-259-A Repair Kit KK-5058-2 JGA-504 CONVENTIONAL SPRAY GUN IMPTANT: Before using this equipment, read all safety precautions and instructions. Keep for future use.

More information

WARRANTY. Illustration

WARRANTY. Illustration WARRANTY This product is guaranteed against defects for a period of 12 months from date of purchase. This warranty is provided by Super Cheap Auto Pty Ltd ACN 085 395 124 (Supercheap Auto) of 751 Gympie

More information

AZ40 HTE AV. instruction manual. AIR GUNSA_ Anest Iwata Group - MA_AZ40HTE AV_EIRev.04

AZ40 HTE AV. instruction manual. AIR GUNSA_ Anest Iwata Group - MA_AZ40HTE AV_EIRev.04 AZ40 HTE AV instruction manual AIR GUNSA Anest Iwata Group - MAAZ40HTE AVEIRev.04 Before use, adjustment or maintenance, it is important to read this instruction manual very carefully. This manual must

More information

AIR-POWERED SIPHON-FEED SPRAY GUN

AIR-POWERED SIPHON-FEED SPRAY GUN 02-06302 6852 INSTRUCTION MANUAL AIR-POWERED SIPHON-FEED SPRAY GUN 058-9336-2 QUICK START GUIDE TECHNICAL SPECIFICATIONS 2 SAFETY GUIDELINES 3 8 KEY PARTS DIAGRAM 9 IMPORTANT INFORMATION 0 OPERATING INSTRUCTIONS

More information

Pro Gun (Model: UCpro and UCPro Plus)

Pro Gun (Model: UCpro and UCPro Plus) Undercoating/Rustproofing Pro Gun (Model: UCpro and UCPro Plus) Professional Undercoating and Rustproofing gun designed to apply protective coatings such as waterborne and solvent based under coatings,

More information

Millennium. Base Coat/Clearcoat Gun. Excellent value Three guns in one. Gravity. GTi Millennium Gravity Feed HVLP Air Cap. GTi Millennium Gravity Feed

Millennium. Base Coat/Clearcoat Gun. Excellent value Three guns in one. Gravity. GTi Millennium Gravity Feed HVLP Air Cap. GTi Millennium Gravity Feed GTi Millennium Hvlp Gravity Feed Gun Order No. 170156 Model No. GTI-620G The Ultimate HVLP Base Coat/Clearcoat Gun Excellent value Three guns in one GTi Millennium Gravity Feed HVLP Air Cap #2000 air cap

More information

AUTOMATIC AIRSPRAY GUN

AUTOMATIC AIRSPRAY GUN INSTRUCTION MANUAL AUTOMATIC AIRSPRAY GUN Manual : 0407 573.011.212 Date : 19/07/04 Supersede : KREMLIN REXSON - Site de Stains : 150, avenue de Stalingrad 93 245 - STAINS CEDEX - FRANCE Téléphone : 33

More information

Fuji Spray LX 20 HVLP Compressor Spray Gun User Manual

Fuji Spray LX 20 HVLP Compressor Spray Gun User Manual Fuji Spray LX 20 HVLP Compressor Spray Gun 6265G LX-20 Gravity 6260S LX-20 Pressure Feed User Manual Page 2 of 13 Contents Contents and Specifications... 1 Safety Precautions... 2 3 Assembly... 4 Operation...

More information

1.2 MM PRODUCTION SPRAY GUN

1.2 MM PRODUCTION SPRAY GUN 1.2 MM PRODUCTION SPRAY GUN Stock Number M701 OWNERS MANUAL Please read these instructions carefully and retain them for future use. On occasion, after printing of our literature is completed, our manufacturers

More information

CT0866 ORIGINAL INSTRUCTIONS SAVE

CT0866 ORIGINAL INSTRUCTIONS SAVE 600ML SPRAY GUN CT0866 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS

More information

SB-E ISS.05. Technical Bulletin. GTI HD range of Suction and Pressure feed Spray Guns

SB-E ISS.05. Technical Bulletin. GTI HD range of Suction and Pressure feed Spray Guns SB-E-2-831 ISS.05 Technical Bulletin GTI HD range of Suction and Pressure feed Spray Guns Table of Contents Topic Page EC Declaration of Conformity 3 Part Numbers 3 Operational Description 3 Kit contents

More information