FENIEX ROCKER PANEL Series MODEL # D-11971

Transcription

1 Support line: Installation and Operational Guide FENIEX ROCKER PANEL Series MODEL # D This instruction manual serves as a guide for the Rocker Panel series. IMPORTANT! Please read through all provided instructions and any listed warnings in regards to product use. Record Product Serial Number:

2 SAFETY REGULATIONS The following provides all the information necessary to safely operate the previously listed products of Feniex Industries, Inc. Please read this manual thoroughly before installing or operating your new product in order to prevent any damage or injury. Failure to follow the listed instructions in the manual may result in damage to your product or personal injury. The product(s) contain(s) high-intensity LEDs. Do not stare directly into the light(s) as eye damage or momentary blindness could occur. Please guarantee all vital components of the vehicle are not in danger of being damaged by drilling holes necessary for installation. Check all sides of the mounting surface before drilling any holes into the vehicle. Do not install this product in any way that interferes with the deployment of the air bag. Doing so may damage the effectiveness of the air bag and can lead to serious personal and vehicle injury. The installer will assume full responsibility of proper installation of the new unit. Please clean the mounting surface before installation of the unit when using tape, brackets, magnet, Velcro or suction cups. The product ground wire must be connected directly to the Negative (-) battery post for effective use of the unit. Please follow all wiring guidelines provided to guarantee long lifespan and productivity. Failing to follow these instructions may result in damage to the product. Warranty Feniex Industries, Inc. warrants to the original purchaser that the product shall be free from defects in material and workmanship for sixty (60) months from the date of purchase for all LED products. Feniex Industries warranties computer systems, horns, speakers and sirens and controllers for 24 months, while coverage for strobes, switches and flashers are for a 12 month term. If a manufacturer defect occurs within this time period, Feniex will repair or replace malfunctioning parts free of charge. If a warranty problem occurs, please contact customer support at or visit the web site at www. Feniex.com. If the product needs to be returned for repair or replacement, call our customer support line to receive a return merchandise authorization number. Operational times will be from 10 a.m. to 5 p.m. central time. Please do not send in product without contacting Feniex first for a RMA number and filling out the return form located at under the About Us tab. SERVICE AFTER EXPIRATION Feniex Industries will still provide service for all products after expiration of the warranty. For any issues, call the customer support line. In some instances it may be necessary for the product to be shipped, freight prepaid and insured for loss or damage to Feniex headquarters. WARNING: Utilizing non-factory screws and mounting brackets may result in loss of warranty coverage

3 WARRANTY LIMITATIONS This warranty shall not apply if this product is a.) used with products not sold or licensed by Feniex Industries, Inc. (including, but not limited to, power supplies, radios, control devices, adapters and power converters); b.) is used for rental; c.) is modified or tampered with; d.) is damaged by negligence, accident, unreasonable use, or by other causes unrelated to defective materials or workmanship; or e.) has had the serial number altered, defaced or removed. Any applicable implied warranty, including warranties of merchantability and fitness for a particular purpose, are hereby limited in duration to the warranty periods described previously in this manual. In no event shall Feniex Industries be liable for consequential or incidental damages resulting from the breach of any implied or express warranties. This warranty is valid world wide. COPYRIGHT This instruction manual and the Feniex products described in this instruction manual may include or describe copyrighted Feniex material. Laws in the United States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Feniex Industries, Inc. FENIEX PRODUCT COPYRIGHTS The product described in this document is the property of Feniex Industries, Inc. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement. Products and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the product or documentation may be reproduced, transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any form or by any means, without prior permission of Feniex Industries, Inc. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Office. All other product or service named in this guide are the property of Feniex Industries, Inc. USAGE AND DISCLOSURE RESTRICTIONS Feniex and the third party supplied products described in the instruction manual may include copyrighted materials. Laws in the United States and other countries preserve for Feniex certain exclusive rights for copyrighted products, including the exclusive right to copy or reproduce in any form the copyrighted product. REGISTERED TRADEMARKS OF FENIEX INDUSTRIES, INC

4 Certifications: CE certified SAE J595 certified Meets CCR, Title 13 requirements RoHs and REACH compliant LEDs Mounting Instructions: 1.) The Rocker panel light series mounts onto the vehicle s rocker panel. The kit includes 3 headliner brackets and 3 mounting hardware kits per rocker panel light stick. a.)to mount to bracketry, remove the flat endcap and slide in provided bolts in the back of the frame. Screw the flat endcap back into the unit and attach bolts and nuts with mounting surface. HEADLINER BRACKET FRAME 2.) Attach each of the three headliner brackets to the lightstick by securing the standoff hardware through the inserts on each bracket. Tighten the washer and nut on the standoff to secure the bracket to the light stick. 3.)Mark the areas where the mounting holes will be drilled into the vehicle s rocker panel. Make sure no vital components could be damaged by the drilling process. 4.) Position the headliner brackets to those marked areas and bend the brackets to fit against the rocker panel. An additional 5 degree bend is suggested to prevent the light stick from sagging. SLIDE-IN BOLT 5.) Utilize self-tapping screws to secure the light stick to the vehicle s rocker panel. 6.) Pass the wires to the vehicle s battery or switch post and follow the included wiring instructions. MOUNTING DIAGRAM Feniex Industries, Inc.

5 / Red wire = Positive, 12V power Black wire= Negative, Ground White wire= Takedown steady function Yellow wire= Flash mode changer Green wire= Takedown flash function Blue wire= Left arrow function Gray wire= Right arrow function Brown wire= Lightbar On function Blue and Gray wires= Center out function Black slash mark= 12V post (switch) Wiring Instructions: See illustration for wiring information: 1.) In order to activate the unit, extend the red (+) wire to the 12V post of the vehicle s battery. Extend the black (-) wire to the ground post of the vehicle s battery. RFI foil shielded cable 12V POST (switch) 2.) Momentarily connect the yellow wire on a 12V source to select a flash pattern. 3.) To activate the lighthead, connect the brown wire to the red (+) wire. 4.) For left arrow function connect the blue wire to a 12V post (switch). There are 7 different left arrow flash patterns. To select a pattern, engage the blue wire a 12V source and momentary connect the yellow wire on a 12V source to select the desired pattern 5.)For right arrow function connect the orange wire to a 12V post (switch). There are 7 different right arrow flash patterns. To select a pattern, engage the orange wire a 12V source and momentary connect the yellow wire on a 12V source to select the desired pattern 6.) In order to achieve, a center out directional pattern, connect both the orange and blue wires to a 12V post (switch). There are 7 different center out flash patterns. To select a pattern, engage the blue and orange wire to a 12V source and momentary connect the yellow wire on a 12V source to select the desired pattern 7.)For takedown steady functionality, connect the white wire to a 12V post (switch) or engage the green wire to a 12V post for takedown flashing. IMPORTANT NOTE: Do not wire this unit to an alternative power supply, such as AC or DC converters. Wire only as instructed. The red (+) wire should connect only to the vehicle s battery or to a 12V switch post. Failure to do so may damage the unit and will void warranty. WIRING DIAGRAM Feniex Industries, Inc.