DYNABRADE.COM. Reorder No. D12.01

Size: px
Start display at page:

Download "DYNABRADE.COM. Reorder No. D12.01"

Transcription

1 DYNABRADE.COM Reorder No. D12.01

2 Abrasive Belt & Finishing Tools Abrasive Belt Tools Dynafile...10 Dynafile II hp Dynafile II...14 Vacuum Dynafile II...15 Electric Dynafile II...15 Mini-Dynafile II...18 Dynafile III...20 Dynabelter...24 Dynangle...27 Dynangle II...28 Take-About Sander...29 Systems & Solutions...30 Abrasive Finishing Tools Dynastraight...32 Lightweight Dynastraight...37 Dynastraight Flapper...38 Rolling Pin Sander...39 Mini-Dynisher...39 Dynisher...40 Electric Dynisher...41 Dyninger...42 Lightweight Dyninger...43 Systems & Solutions...45 General Purpose Tools Die Grinders Non-Vacuum s Pencil Grinders...47 Quick-Change Pencil Grinder hp Die Grinders hp Die Grinders hp Die Grinder hp Die Grinders hp Die Grinders...67 Vacuum s Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders...70 Disc Sanders Non-Vacuum s 2" Dia. Disc Sanders " Dia. Disc Sanders " - 4" Dia. Disc Sanders " - 5" Dia. Disc Sanders ", 4-1/2" Dia. Disc Sanders /2" - 5" Dia. Disc Sanders ", 7" Dia. Disc Sanders " Dia. Disc Sanders...81 Right Angle Wet Sander...83 General Purpose Tools (Cont d.) Disc Sanders (Cont d.) Vacuum s 2" Dia. Vacuum Disc Sanders " Dia. Vacuum Disc Sanders " Dia. Vacuum Disc Sanders " Dia. Vacuum Disc Sander...90 Systems & Solutions...91 Grinders Non-Vacuum s 2", 3" Dia. Depressed Center Wheel Grinders " Dia. Depressed Center Wheel Grinders ", 4" Dia. Depressed Center Wheel Grinders " Dia. Depressed Center Wheel Grinders " - 5" Dia. Depressed Center Wheel Grinders /2" Dia. Electric Depressed Center Wheel Grinder " Dia. Depressed Center Wheel Grinders " Dia. Depressed Center Wheel Grinders ", 4" Dia. Type 1 Wheel Grinders " Dia. Type 11 Cup Wheel Grinders Cone or Plug Wheel Grinders " Dia. Cut-Off Wheel Tools " - 4" Dia. Cut-Off Wheel Tools " Dia. Cut-Off Wheel Tools Vacuum s 3" Dia. Vacuum Cut-Off Wheel Tools /2" - 5" Dia. Vacuum Cut-Off Wheel Tools " Dia. Vacuum Cut-Off Wheel Tool Systems & Solutions Buffing Tools Two-Step System Tools Two-Step System Process ", 5" Dia. Dynabuffer " Dia. Buffers " Dia. Sander/Buffer and Buffer Cut & Polish Rotary/ Random Orbital Head " Dia. Straight-Line Buffers " - 8" Dia. Buffers " - 8" Dia. Buffers Electric Buffer Electric Random Orbital Buffer Systems & Solutions General Purpose Tools (Cont d.) Drills & Specialty Tools Non-Vacuum s.4 hp Drills hp,.5 hp Drills hp Drills Drill Speed Recommendation Chart DynaPen Series Stockade Filer Stockade Sander & Saw Dynadie III Router Dynascaler Vacuum s.4 hp Vacuum Drills hp Vacuum Drills Vacuum Router Random Orbital & Finishing Sanders Random Orbital Sanders Non-Vacuum & Vacuum s Dynorbital Supreme Wet Dynorbital Supreme Dynorbital Silver Supreme Dynorbital-Spirit HiVac Dynorbital-Spirit Swirl-Free Checklist Two-Hand Dynorbital " Dia. Two-Hand Dynorbital " Dia. Electric Two-Hand Dynorbital 159 Palm-Style Mini-Dynorbital Offset Mini-Dynorbital Angle-Head Mini-Dynorbital Right Angle Mini-Dynorbital Systems & Solutions Gear-Driven & Finishing Sanders Non-Vacuum & Vacuum s DynaLocke Gear-Driven Sanders " Dia. Gear-Driven Sanders Dynafine Detail Sander Dynafine Backsplash Sander Dynafine Finger Sander Dynafine Raised Panel Sander Dynabug T Sander Wet Dynabug T Sander Dynabug Sander Dynabug II Sander Dynaline Sander " File Board Sander Right Angle Denibber Systems & Solutions

3 Dynabrade Red Tools DynaZip Air Tool Auto File II Disc Sanders Die Grinders Cut-Off Wheel Tools Impact Wrench Right Angle Buffers Pistol Grip Buffer Dual-Piston Sander RED-TRED Eraser Disc Tools Abrasive Machinery Bench & Pedestal Belt Grinders Bench & Pedestal Disc Grinder Versatility Grinder Electric Tool Post Grinder Air Tool Post Grinder SuperFinisher Coolant Filtration System Source Capture Systems Downdraft Sanding Tables Metal Capture Downdraft Table Metal Capture Downdraft Station Electric Portable Vacuum System Electric Industrial Portable Vacuum Electric Portable Vacuum Accessories Pneumatic Portable Vacuum System Vacuum Hoses & Cuffs Conversion Kits, Swivel Adapters, Accessories Dust Collection Receptacles, Self-Contained Systems Downdraft Table Replacement Filters, Respirator Masks Random Orbital Sander Overskirt Shrouds Disc Sander Vacuum Shrouds, Conversion Kits Pencil Grinder Vacuum Shrouds For more information,visit Dynabrade.com! Accessories Air Line Assemblies - Flexible, Swivel-Style Air Line Assemblies - Lightweight Air Line Fittings Air Tune-Up Kits Arbors, Accessories Bench Mount Buffing Pads, Hook-Face Carbide Burrs Contact Wheels & Assemblies Couplers, Coupler/Plug Assemblies Disc Sanding Pads & Assemblies Drop-In s Dynabug, Dynabug II, Dynabug T Pads Dynacushion Pneumatic Wheels Dynafine Sanding Pads Dynaflex Expander Wheels DynaJet In-Line Blow Guns Dynaline Sanding Pads DynaMitt Sanding Glove Dynaswivel Air Line Connectors DynaWheel Pneumatic Wheels DynaZip Accessories, Overhose Assemblies Dynūba, Lubricants and Grease File Board Sanding Pads Filter-Regulator-Lubricator Finesse Sanding Creme & Glaze Foam-Backed Sanding Pads Gear-Driven Sanding Pads Handles for Various Tools Hanger for Right Angle Denibber Hangers for Various Tools Interface Pads, Pad Conversions ing Jacks Mini-Dynorbital Disc Pads Mini-Dynorbital Sanding Heads Mini-Dynorbital Sanding Pads Pneumatic Wheels, Accessories Portable Wet Tank Assembly Random Orbital Sanding Pads, Overview Random Orbital Sanding Pads, Vinyl-Face Random Orbital Sanding Pads, Hook-Face Random Orbital Sanding Pads, Specialty Random Orbital Sanding Pads, Additional Random Orbital / Gear-Driven Sanding Pads RED-TRED Eraser Disc, Accessories..247 Safety-Lock Throttle Levers Slotted Wheels ed Adapters Wet/Dry Sander Disc Pads AbrasivEdge Abrasives Bands, Abrasive Belts, Abrasive Blades & Files Bonded Products Discs, Abrasive Discs, Center-Hole Discs, Locking-Type Dynafine Abrasives Dynascaler Flaps & Hub Grit Grading Systems Polishing Products Rolls & Strips, Abrasive Rolls, Microfinishing Scribe Points & Chisels Sheets, DynaCut Stars, Abrasive Wheels, Abrasive Wheels, Convolute Wheels, Cut-Off Wire Products Product & Safety Information Safety Comes First Safety Guidelines Recommended Air System Selecting a Compressor Maintaining Adequate Air Flow Healthy Work Environment Performance Assurance Numerical Tool Index

4 General Product Information Discover The Dynabrade Difference! DYNABRADE MISSION STATEMENT To exceed the expectations of our customers through the innovative design of the highest quality abrasive power tools and related accessories. Product Line Founded in 1969, Dynabrade has earned a reputation and position of continued leadership in the innovative design and manufacturing of unique portable abrasive power tools. Dynabrade tools grind, deburr, file, sand and polish to meet the needs of many industries, for work with metals, wood, plastics, glass, rubber, stone, fiberglass, composites and more. Continuous Quality Control Every Dynabrade product undergoes rigorous performance tests at precise stages, from design conception through product assembly and packaging, to ensure they meet our own high standards and the demands of our customers. Our goal is to maintain or improve Dynabrade quality with product and service performance levels that equal or exceed that of any competitor, and to exceed customers expectations worldwide. Dynabrade Trademarks Trademarks and service marks used in this catalog are the property of Dynabrade, Inc. Dynabrade, D logo are registered trademarks of Dynabrade, Inc. Other registered marks include: Dynafile, Dynabelter, Dynadie, Dynastraight, Dynapad, Dynaswivel, Dynorbital, Dynorbital-Spirit, Dynacushion, Dynabug, Dynafine, DynaLocke. Use of these marks is strictly prohibited without prior written consent of Dynabrade, Inc. Product Maintenance To maximize the long-term value of your Dynabrade products, have them repaired by our factory experts. We have a fully trained staff to meet all your service needs. By relying on Dynabrade for service, you can be confident that your tool will continue to operate at peak levels of performance. For those who have their own in-house repair facilities, ask your local Dynabrade distributor about our Tune-Up Kits available for selected models, or place your order for specific parts directly with your Dynabrade distributor. Flat Rate Repair Flat rate repair offers a reliable way to keep your tools at peak performance at a known cost. It includes labor and all necessary parts needed to restore the tool to approved factory performance levels. Dynabrade will only repair standard items that were returned with the tool. (If accessories such as Contact Arms, Pads, etc. are missing from the tool or damaged, they will not be replaced.) We may determine, based on our examination, that a product is beyond economical repair. Tune-Up Kits See Page 267 The regular maintenance of any air tool will contribute to greater efficiency of the tool and will prolong tool life. Tune-Up Kits contain replacement parts which are most susceptible to wear. Each Dynabrade tool has an associated Tune-Up Kit, which you will find referenced throughout the catalog. Drop-In s See Page 265 Drop-in s provide a convenient, dependable way to repair your tools in-house. Industrial Air Tool Maintenance Dynabrade has designed a booklet to promote and assist with proper air tool maintenance. Please order our Industrial Air Tool Maintenance Guide, no. D Dynabrade, Inc. World Headquarters in Clarence, New York

5 Dynabrade Distribution Service and Support for Customers Worldwide Global Network of Authorized Dynabrade Distributors Dynabrade supplies high-quality portable abrasive power tools to customers through a worldwide network of professional distributors, who are capable of meeting the specific needs of the industrial marketplace. Our distributors have extensive knowledge of Dynabrade s complete line of power tools and related accessories. Their goal is to improve the customer s competitiveness by minimizing costs through a continuous improvement process. FREE Demonstration Policy We can perform a no-obligation demonstration of Dynabrade products in your facility. It is a sure way to see which product is best suited to your application, and to experience the time, labor and cost-saving advantages of Dynabrade products. Contact your local Dynabrade distributor to arrange an on-site demonstration. To locate your nearest Dynabrade distributor, call our Customer Service Department, or visit our distributor locator at: Dynabrade.com. Customer Service Dynabrade s Customer Service staff has just one important job to make sure that you are completely satisfied with your order and service. Our Customer Service Department is staffed with highly trained people, ready to serve you in any way they can, from ordertaking to technical service to rush shipments! To more efficiently serve the international marketplace, our Luxembourg office can communicate in 14 languages. In short, our commitment to customer service is to satisfy our customers by serving them well. If we can help or improve in any way, we'd like to hear from you. Safety Comes First See Additional Safety Information on Page 295 Safe Operation Understanding the proper and safe procedures involved with operating power tools is our primary concern. Accidental injury or death can be prevented and/or reduced by reading and understanding the following: Safety Code for Portable Air Power Tools (B186.1), Compressed Air & Gas Institute Standard (CAGI). Safety Requirements for Use, Care and Protection of Abrasive Wheels (B7.1), American National Standards Institute (ANSI). Hand-Held Non-Electric Power Tools Safety Requirements (ISO 11148), International Organization for Standards (ISO). General Industry Safety & Health Regulations (CFR 29 Part 1910), Occupational Safety and Health Administration (OSHA). Applicable State and Local Regulations (regulations may vary). Users are responsible for following all established safety codes and regulations. Safety Legend Carefully Read All Instructions Before Operating or Servicing Any Dynabrade Abrasive Power Tools Always operate, inspect and maintain tools in accordance with all safety codes and regulations for the protection of operating personnel as well as adjacent areas. All products offered by Dynabrade are not to be modified, converted or otherwise altered from the original design without the expressed written consent from Dynabrade, Inc. Use only genuine Dynabrade replacement parts and accessories made especially for the tool in use. The use of any other manufacturers replacement parts and accessories could create a hazard. For More Information, Prices or an On-Site Demonstration, Contact Your Local Dynabrade Distributor or Call/Fax our Consumer Information s: DYNABRADE, INC Sheridan Drive Clarence, New York Phone: (716) Fax: US Consumers Call Toll-Free: DYNABRADE INTERNATIONAL 8989 Sheridan Drive Clarence, New York Phone: (716) Fax: Canadian Consumers Call Toll-Free: DYNABRADE EUROPE S.à r.l. Zone Artisanale Op Tomm 6 L-5485 Wormeldange Haut, Luxembourg Telephone: Fax: DYNABRADE DO BRASIL LTDA. Av. Kennedy CJ 32 São Bernardo do Campo SP - CEP Telephone: Fax: DYNABRADE INDIA ABRASIVE POWER TOOLS Pvt Ltd. EL-54, TTC Industrial Area, M.I.D.C. Mahape, Electronic Zone, Navi Mumbai Maharashtra, India Telephone: Fax: Visit Dynabrade s Website at: Dynabrade.com Read and understand tool manual before use to reduce risk of injury to operator, visitors, and tool. Eye protection must be worn at all times, eye protection to conform to ANSI Z87.1. Respiratory protection to be used when exposed to contaminants that exceed the applicable threshold limit values required by law. General warning. Caution, risk of danger. Practice safety requirements. Work alert, have proper attire, and do not operate tools under the influence of alcohol or drugs. Ear protection to be worn when exposure to sound, exceeds the limits of applicable Federal, State or local statues, ordinances and/or regulations. Air line hazard, pressurized supply lines and flexible hoses can cause serious injury. Do not use damaged, frayed or deteriorated air hoses and fittings. 5

6 Dynabrade Warranty Information Dynabrade Pneumatic Tools Lifetime Warranty All tools must be registered at to qualify for Lifetime Warranty. Tools purchased beginning August 18, 2008 may be registered for Lifetime Warranty. Lifetime Warranty applies only to portable pneumatic tools manufactured by Dynabrade, Inc. in the USA. Warranty applies only to the original tool owner; warranty is non-transferable. All Dynabrade portable pneumatic power tools are rigorously inspected and performance tested in our factory before shipping to our customers. Dynabrade warrants all Dynabrade portable pneumatic power tools against defects of workmanship and materials under normal use and service for the lifetime of the tool as set forth herein. Upon examination and review at Dynabrade s factory, Dynabrade shall confirm whether the tool qualifies for warranty status, in which case Dynabrade will repair or replace the tool at no charge to the customer. This warranty is contingent upon proper use of the tool in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment that has been subjected to misuse, negligence, accident or tampering in any way so as to affect its normal performance. This warranty does NOT cover normally wearable parts and accessories, including, but not limited to, bearings, contact wheels, rotor blades, regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets and other wearable parts. Dynabrade only warrants such normally wearable parts and accessories against manufacturing defects at the time of receipt. If, upon receipt and prior to use, a normally wearable part or accessory is found to be defective, Dynabrade will repair or replace such part or accessory at no charge to the customer. To activate Lifetime Warranty, customer must register each portable pneumatic power tool at Dynabrade will not honor Lifetime Warranty on unregistered tools. A one-year warranty will be honored on all unregistered portable pneumatic power tools. (In European countries, warranty on unregistered tools will be two years.) Customer must return the defective unregistered tool to Dynabrade within one year (or two years in European countries) from the date of purchase. To be considered for warranty, tools must be sent back to our factory, transportation prepaid by user. Please send tool back to attention Repair Department with note fully explaining the nature of the problem along with a copy of original invoice indicating model and serial number. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO OTHER WARRANTIES THAT EXTEND BEYOND THIS EXPRESS WARRANTY. Dynabrade will not be liable for damages to products, other property or persons due to improper use or through attempts to use products for other than their intended use. DYNABRADE WILL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONTINGENT, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES. Dynabrade's liability with respect to a claim for any other damages arising out of or connected with the manufacture, sale, purchase, non-delivery, use or performance of any product sold by Dynabrade will in no event exceed to the price paid for the product. Dynabrade Red Tools 6-Month Warranty Dynabrade warrants all Dynabrade Red tools against defects in workmanship and materials under normal use and service for a period of 6 months from the date of purchase as set forth herein. Customer must return the defective tool to Dynabrade within 6 months from the date of purchase. Upon examination and review at Dynabrade s factory, Dynabrade shall confirm whether the tool qualifies for warranty status, in which case Dynabrade shall repair or replace the tool at no charge to the customer. This warranty is contingent upon proper use of the Dynabrade Red tool in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment that has been subjected to misuse, negligence, accident or tampering in any way so as to affect its normal performance. This warranty does NOT apply in the following cases: (i) consumables such as sanding pads, etc.; (ii) lack of lubrication or evidence of rust, dirt or corrosion; (iii) tools requiring normal tuneup or cleaning; (iv) tools being used after they are badly worn such as using ratchet with worn yoke; (v) ratchet anvils damaged by excessive hand torquing; (vi) use in production-type applications. This warranty does NOT cover normally wearable parts and accessories, including, but not limited to, bearings, contact wheels, rotor blades, regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets and other wearable parts. Dynabrade only warrants such normally wearable parts and accessories against manufacturing defects at the time of receipt. If, upon receipt and prior to use, a normally wearable part or accessory is found to be defective, Dynabrade will repair or replace such part or accessory at no charge to the customer. To be considered for warranty, tools must be sent back to our factory, transportation prepaid by user. Please send tool back to attention Repair Department with note fully explaining the nature of the problem along with a copy of original invoice indicating model and serial number. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO OTHER WARRANTIES THAT EXTEND BEYOND THIS EXPRESS WARRANTY. Dynabrade will not be liable for damages to products, other property or persons due to improper use or through attempts to use products for other than their intended use. DYNABRADE WILL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONTINGENT, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES. Dynabrade's liability with respect to a claim for any other damages arising out of or connected with the manufacture, sale, purchase, non-delivery, use or performance of any product sold by Dynabrade will in no event exceed to the price paid for the product. Dynabrade Electric Tools 6-Month Warranty Dynabrade warrants all electric tools against defects in workmanship and materials under normal use and service for a period of 6 months from the date of purchase. All conditions of Dynabrade Red tool 6-month warranty also apply to Dynabrade electric tools. Dynabrade 90-Day Warranty on Reconditioned and Repaired Tools All reconditioned and repaired tools manufactured by Dynabrade have been refurbished by Dynabrade s factory experts, and have undergone rigorous testing to ensure that they meet our high standards of quality. Dynabrade warrants all reconditioned and repaired tools manufactured by Dynabrade against defects in workmanship and materials under normal use and service for a period of 90 days from the date of purchase as set forth herein. Customer must return the defective tool to Dynabrade within 90 days from the date of purchase. Upon examination and review at Dynabrade s factory, Dynabrade shall confirm whether the tool qualifies for warranty status, in which case Dynabrade shall repair or replace the tool at no charge to the customer. This warranty is contingent upon proper use of the reconditioned and repaired tool in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment that has been subjected to misuse, negligence, accident or tampering in any way so as to affect its normal performance. This warranty does NOT cover normally wearable parts and products, including, but not limited to, bearings, contact wheels, rotor blades, regulators, valve stems, levers, shrouds, guards, O-rings, seals, gaskets and other wearable parts. Dynabrade only warrants such normally wearable parts and accessories against manufacturing defects at the time of receipt. If, upon receipt and prior to use, a normally wearable part or accessory is found to be defective, Dynabrade will repair or replace such part or accessory at no charge to the customer. To be considered for warranty, tools must be sent back to our factory, transportation prepaid by user. Please send tool back to attention Repair Department with note fully explaining the nature of the problem along with a copy of original invoice indicating model and serial number. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO OTHER WARRANTIES THAT EXTEND BEYOND THIS EXPRESS WARRANTY. Dynabrade will not be liable for damages to products, other property or persons due to improper use or through attempts to use products for other than their intended use. DYNABRADE WILL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONTINGENT, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES. Dynabrade's liability with respect to a claim for any other damages arising out of or connected with the manufacture, sale, purchase, non-delivery, use or performance of any product sold by Dynabrade will in no event exceed to the price paid for the product. Dynabrade Portable Vacuums Two-Year Warranty Dynabrade warrants all Portable Vacuums manufactured by Dynabrade against defects in workmanship and materials under normal use and service for a period of 2 years from the date of purchase as set forth herein. (61500 Portable Vacuum has one-year warranty.) Customer must return the defective vacuum to Dynabrade within 2 years from the date of purchase. Upon examination and review at Dynabrade s factory, Dynabrade shall confirm whether the vacuum qualifies for warranty status, in which case Dynabrade shall repair or replace the vacuum at no charge to the customer. This warranty is contingent upon proper use of the Portable Vacuum in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment that has been subjected to misuse, negligence, or accident, such as using incorrect filters. It shall also not apply to equipment that has been tampered with in any way so as to affect its normal performance. This warranty does NOT cover normally wearable parts and products, including, but not limited to, electrical motor brushes, hoses, couplers, filters, dust bags and other wearable parts. Dynabrade only warrants such normally wearable parts and accessories against manufacturing defects at the time of receipt. If, upon receipt and prior to use, a normally wearable part or accessory is found to be defective, Dynabrade will repair or replace such part or accessory at no charge to the customer. To be considered for warranty, vacuums must be sent back to our factory, transportation prepaid by user. Please send vacuum back to attention Repair Department with note fully explaining the nature of the problem along with a copy of original invoice indicating model and serial number. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND THERE ARE NO OTHER WARRANTIES THAT EXTEND BEYOND THIS EXPRESS WARRANTY. Dynabrade will not be liable for damages to products, other property or persons due to improper use or through attempts to use products for other than their intended use. DYNABRADE WILL NOT BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY SPECIAL, CONTINGENT, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES. Dynabrade's liability with respect to a claim for any other damages arising out of or connected with the manufacture, sale, purchase, non-delivery, use or performance of any product sold by Dynabrade will in no event exceed to the price paid for the product. 6

7 Measurement Conversions USA Conversions to International Measurements Conversion Factors Meters Centimeters Millimeters 1 Inch (in.) m 2.54 cm 25.4 mm 1 Foot (ft.) m cm mm Kilograms Grams 1 Ounce (oz.) kg g 1 Pound (lb.) kg 454 g Volume Liters Power Kilowatts Watts 1 US Gallon l 1 hp kw 746 W Torque Newton Meters Air Pressure Bar 1 Ounceinch Nm 90 Pounds per 6.2 Bar 1 Poundinch Nm Square Inch (PSI) Abrasive Speed SMPM Expressed in db(a). This is 1 Surface Foot.3048 Surface the pressure measurement per Minute Meters per according to method outlined (SFPM) Minute (SM/Min) in ISO regulation ISO Air Flow Rate L/MIN 1 Standard Liters Cubic Foot per Minute per Minute (L/Min) (SCFM) NOTE: Dynabrade expresses air flow rate in only. To determine how many tools a compressor will run, compare the SCFM of tool with capacity of compressor s inlet (free air) CFM rating. Common Dimensions (Approximate) Inches Millimeters Inches Millimeters 3/32" 2.5 mm 4-1/2" 114 mm 1/8" 3 mm 5" 127 mm 3/16" 5 mm 6" 152 mm 1/4" 6 mm 7" 178 mm 3/8" 10 mm 8" 203 mm 1/2" 13 mm 9" 229 mm 3/4" 19 mm 11" 279 mm 1" 25 mm 12" 305 mm 1-1/4" 32 mm 18" 457 mm 2" 51 mm 20-1/2" 521 mm 2-3/4" 70 mm 24" 610 mm 3" 76 mm 30" 762 mm 3-1/2" 89 mm 34" 864 mm 4" 102 mm 44" 1,118 mm Common Rectangular Pad Sizes - Width x Inches Millimeters 4" x 4-5/16" 102 mm x 110 mm 4-1/4" x 4-1/2" 108 mm x 114 mm 2-3/4" x 8" 70 mm x 203 mm 2-3/4" x 11" 70 mm x 278 mm 3-2/3" x 7" 93 mm x 178 mm 2-7/8" x 3-1/8" 73 mm x 79 mm 2-3/8" x 3-3/4" 60 mm x 95 mm Discover The Dynabrade Difference! Established in 1969, Dynabrade, Inc. is recognized as the global leader in the design and manufacturing of high-quality Portable Abrasive Power Tools. Utilized in every corner of the world, Dynabrade tools continually meet and exceed the needs of countless industries, by offering The Dynabrade Difference: MADE IN USA proudly displayed on every Industrial Air Tool! LIFETIME WARRANTY on Industrial Air Tools made in USA! SAME-DAY or NEXT-DAY Shipping on most USA Orders! FREE ON-SITE Demonstrations by Application EXPERTS! SYSTEMS Approach for Complete Solutions! All of the above, PLUS: Unmatched Marketing Materials Personal, Professional Customer Service Complete Service & Repair Program 7

8 Dynabrade Catalog Guide Explanation of Helpful Symbols and Information on Each Page Tool Motion Dynabrade abrasive power tools move in a variety of patterns to suit virtually every type of application. Motion symbols are shown to illustrate the action produced by a specific tool. Add-On Cart At the upper right of every tool section, this is a handy guide to all related accessories. Here is your quickest route to the proper Contact Arms, Sanding Pads and more! Gearless Tool This symbol identifies a Dynabrade tool that operates with no gears. Gearless tools have fewer wearable parts, for reduced maintenance and less downtime. For more information, see page 51. Accessory Cross-Reference Along with the Add-On Cart, vital accessories are also identified on the tool, with corresponding page number for more information. Tab-Style Organization Easily find any product category at the outside edge of each page. GEAR-DRIVEN & FINISHING SANDERS DynaLocke Air-Powered Dual-Action Sander Combination Rotary and Random Orbital Sander 12,000 DynaLocke is truly two tools in one, easily changing from a rotary Disc Sander to Random Orbital Sander with the flip of a switch. Ideal for metal applications; great on composite materials. Excellent for automotive work, such as paint stripping and blending. Also utilized for leveling glue seams on Corian and other solid surfaces. Switch is recessed within tool grip to prevent accidental engaging. Rotary Motion For Stripping and Blending Non-Vacuum " Diameter Includes Hook-Face Pad /2" Diameter Includes Hook-Face Pad " Diameter Includes Hook-Face Pad " Diameter Includes Hook-Face Pad. 3/16" (5 mm) Dia. Orbit For Swirl-Free Finishes Self-Generated Vacuum Self-Generated Vacuum models are ready for connection to optional portable dust collection system. Tool has 1-1/4" outside diameter vacuum port, allowing increased air flow. Designed to vacuum in random orbital mode only " Diameter Includes Hook-Face Pad /2" Diameter Includes Hook-Face Pad " Diameter Includes Hook-Face Pad " Diameter Includes Hook-Face Pad. Pad Dia See page 231 for Dynabrade High-Quality Sanding Pads! Maximum Air Flow Hose I.D. Size 166 Air Inlet Tool SANDING PADS PAGE 231 FOR ABRASIVE DISCS 3" (76 mm), 3-1/2" (89 mm), 5" (127 mm) and 6" (152 mm) dia. SEE PAGE 275 Portable Dust Collection System (Optional - See Page 219) Tool should be completely stopped before changing sanding action. Corian is a trademark of DuPont (336) 12,000 3 (76) 81 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) (336) 12,000 3 (76) 86 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) (336) 12, /2 (89) 80 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) (336) 12, /2 (89) 85 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.35 (1.0) 10-5/16 (263) 5-3/8 (137) (336) 12,000 5 (127) 82 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.7 (1.2) 11-1/16 (280) 5-1/8 (131) (336) 12,000 5 (127) 82 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.6 (1.2) 11-1/16 (280) 5-1/8 (131) (336) 12,000 6 (152) 82 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.8 (1.2) 11-1/2 (293) 5-1/8 (131) (336) 12,000 6 (152) 85 db(a) 23 (651) 1/4 (6) 1/4" NPT 5/16"-24 Female 2.7 (1.2) 11-1/2 (293) 5-1/8 (131) Tune-Up Kit: No (page 267) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) Abrasive Capacity Located directly below the Add-On Cart, this distinctive shape identifies all abrasives compatible with the designated tools. Abrasive dimensions are expressed in inches and millimeters. Tech Tip Each Tech Tip offers a proven suggestion for operating your tool at peak efficiency. Tech Tips have been compiled through actual workplace experiences. QR-Code Scan this code on your mobile device for instant viewing of Dynabrade tool videos and other mobile-formatted content! To download free QR-Code reader, visit: Portable Dust Collection System Dynabrade Self-Generated Vacuum Tools collect dust and debris through the tool s exhaust, eliminating the need for an external vacuum source. These tools require the use of a portable dust collection system (sold separately), as indicated by this photo. For all optional dust collection systems, see page

9 ABRASIVE BELT TOOLS ABRASIVE BELT TOOLS Dynafile...10 Dynafile II hp Dynafile II...14 Vacuum Dynafile II...15 Electric Dynafile II...15 Mini-Dynafile II...18 Dynafile III...20 Dynabelter...24 Dynangle...27 Dynangle II...28 Take-About Sander...29 Systems & Solutions...30 DYNABRADE.COM

10 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more! Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone. Tool includes Contact Arm for standard use. Also accepts a variety of additional Contact Arms (see pages 11-12). easily adjusts to the most comfortable throttle lever position. Superior belt tracking permits use of 1/8", 1/4" or 1/2" wide x 24" long abrasive belts. Work in areas as small as 3/8" diameter. Lightweight composite belt guard allows quick and easy belt change! Hard and soft platen pads mount onto Contact Arms for heavy grinding or contour polishing (see page 29). SEE the Dynafile at Work! Reach into areas as small as 3/8". CONTACT ARMS PAGE 11 COUPLER/PLUG PAGE 228 BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1/8", 1/4", 1/2" wide x 24" long (3 mm, 6 mm, 13 mm x 610 mm) SEE PAGE 270 The most recognized shape in portable abrasive belt tools! Clean and finish using non-woven nylon belts. Arrows located on Dynafile belt cover indicate abrasive belt direction. Grinding from the RETURN SIDE of the belt will greatly enhance tool performance and increase belt life Versatility Kit Includes Dynafile with five popular Contact Arms, plus an assortment of abrasive belts, in durable case. Includes Contact Arms 11213, 11216, 11218, and (see page 11). USA Government National Stock Efficiently rework turbine blades with specialized contact arm Grind welds using belts as narrow as 1/8" wide. Dynaswivel air line connector is ideal for use with most air tools. It improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 223.) Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (373) 20, db(a) 1/8-1/2 (3-13) W x 24 (610) L 31 (878) 5,800 (1,768) 3.1 (1.4) 14.6 (371) 4.6 (116) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) 10

11 Dynafile Contact Arms 4" to 14" Workable Reach All rubber Contact Wheels are 70 durometer, unless noted. To maximize the life of 1/4" bearings or smaller, lower the operating air pressure to 45 PSIG (3.1 Bar) and run the motor at a lower. Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) 11178, Up to 32" reach 11178: 11178: None Enter slots as narrow 1/2" x 34" Wheel as 3/8" (9" reach) (5/16" dia. steel) Deburr 1/2" to 1" 11179: 11179: tubing 1/2" x 34" Wheel 11257: Custom-made. Specify length and contact wheel. (9" reach) (5/8" dia. rubber) ABRASIVE BELT TOOLS PSIG maximum 1/4" x 24" File round openings as 5/16" dia. x 1/8" wide, steel 1/4" wide; small as 7/16" Thin PSIG maximum 1/2" x 24" See for 5/16" dia. x 3/8" wide, steel 1/2" wide; heavy-duty version Thin PSIG maximum 1/2" x 24" Work on contact wheel 7/16" dia. x 3/8" wide, rubber 1/2" wide; or platen pad Soft Enter 1/2" x 1/2" 1/4" x 24" openings 7/16" dia. x 1/8" wide, brass 1/4" wide; Thin Enter 5/16" x 3/4" 1/4" x 24" openings 5/8" dia. x 1/8" wide, rubber 1/4" wide; Soft Enter channels as 1/2" x 24" narrow as 9/16" 7/16" dia. x 3/8" wide, steel 1/2" wide; Thin Standard on 1/2" x 24" /8" dia. x 3/8" wide, rubber 1/2" wide; See for Soft heavy-duty version 11219, No platen due to 1/4" or 11219: Wheel, None offset design 1/2" x 24" 1" dia. x 3/8" wide, 70 duro Ideal for slack 11252: Wheel, polishing; also 1" dia. x 3/8" wide, 40 duro grinding radiuses (Both wheels radiused rubber) Heavy-duty steel 1/2" x 24" Optional /8" dia. x 3/8" wide, rubber 1/2" wide; Steel Platen available Soft for grinding See for 1/2" x 24" heavy-duty version 3/4" dia. x 1/2" wide, rubber 1/2" wide; Hard For 1/8" wide belts 1/8" or 1/4" None V Shaped Wheel No platen due to x 24" 1" dia. x 3/8" wide, 90 duro, offset design tapered urethane Grind corners, strap polish Deburrs both edges of 1/2" x 34" (two) None workpiece simultaneously 1" dia. x 3/8" wide, rubber Contact wheels adjust for material 1/8" to 5/8" thick 11

12 ABRASIVE BELT TOOLS Dynafile Contact Arms 4" to 14" Workable Reach All rubber Contact Wheels are 70 durometer, unless noted. See more information on Contact Wheels and Assemblies on page 256! Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) 11237, PSIG maximum 11237: 11237: 5/16" dia. x 1/8" None Turbine Blade Arm For use on turbine blades 1/4" x 24" wide, steel wheel Reach areas as small as 11238: 11238: 1/4" dia. x 3/8" wide, 5/16" wide 1/2" x 24" steel (Consists of three /2" strap polish area Bearings) PSIG maximum 1/2" x 24" Heavy-duty steel 5/16" dia. x 3/8" wide, steel 1/2" wide; Grind in narrow areas Thin " workable reach 1/2" x 34" Optional Steel 5/8" dia. x 3/8" wide, rubber 1/2" wide; Platen Pad available Soft " workable reach 1/4" x 34" /8" dia. x 1/8" wide, rubber 1/4" wide; Soft Heavy-duty steel 1/2" x 24" Grind over contact 3/4" dia. x 1/2" wide, rubber 1/2" wide; wheel or platen pad Hard 11244, " workable reach 11244: Optional Steel 1/2" x 44" 5/8" dia. x 3/8" wide, rubber 1/2" wide; Platen Pad available 11245: Soft 1/4" x 44" 11253, Grinds and polishes 1/4" to 1/2" 1/4" to 1/2" wide wheels, Big Wheel Arm deep slots or narrow x 34" 2-1/8" to 4-3/4" diameter grooves (specify size) I.D. polish, deburr or 1/2" x 34" None Cross Bow Arm ream with one 180 5/8" dia. x 3/8" wide, rubber wrist turn Deburr leading radius of 1" to 4" round openings Great for pipe fitters Blend stainless steel 1/2" x 24" Stroke Sander Arm 5/8" dia. x 3/8" wide, rubber 1/2" wide; Soft 7/16" dia. x 3/8 wide, steel For in-line scratch 1/2" x 24" The Banana Arm pattern 5/8" dia. x 3/8" wide, rubber 1/2" wide For flat grinding using 1/2" x 24" Offset Arm platen at or near 5/8" dia. x 3/8" wide, rubber 1/2" wide; corners and edges of Hard large radiuses Contact wheel is offset to prevent gouging Guide wheels prevent 1/2" x 24" None Guide-Cut Arm undercutting 60 to 80 grit 5/8" dia. x 3/8" wide, rubber Removes raised material within.020" or less Use 60 to 80 grit belts Grind over contact 1/2" x 24" wheel or platen 5/8" dia. x 3/8" wide, rubber 1/2" wide; Heavy-duty applications Soft 12

13 Dynafile II Air-Powered Abrasive Belt Tool Reach Normally Inaccessible Areas Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more. Grind from contact wheel or platen pad; finish and polish using slack of belt. Lightweight, ergonomic 7 offset design. Grinding head pivots 360 for securing in most efficient position. Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob. CONTACT ARMS PAGE 16 COUPLER/PLUG PAGE 228 BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1/8" - 3/4" wide x 18" long (3 mm - 19 mm x 457 mm) SEE PAGE 270 ABRASIVE BELT TOOLS For 18" Long Belts Includes Contact Arm for 3/4" wide x 18" long belts (see page 16). USA Government National Stock For 18" Long Belts Includes Contact Arm for 1/2" wide x 18" long medium non-woven nylon belt (78020). Excellent for setting grain lines, achieving consistent satin finish on metals, removing oxide and weld discoloration Slow Speed, For 18" Long Belts 1,500 SFPM. Slow speed ensures longer belt life when working on titanium and other exotic materials. Includes Contact Arm for 3/4" wide x 18" long belts (see page 16) Slack of abrasive belt is used to efficiently polish radiused area. Optional Stroke Sander Arm leaves in-line scratch pattern For 20-1/2" Long Belts Includes Contact Arm for 5/8" or 3/4" wide abrasive belts. (11287 is only arm that accepts 20-1/2" long belts.) Dynafile II easily converts to a Die Grinder with optional Collet (1/4") or Collet (6 mm). To convert to a Drill, order Chuck (1/4") Versatility Kit Includes Dynafile II with Contact Arm, plus additional and Contact Arms. Also includes eight popular abrasive belts, three platen pads, Collet (1/4") for Die Grinder use, plus and Wrenches. All contained in a durable carrying case. USA Government National Stock Versatility Kit Metric Includes Dynafile II with Contact Arm, plus additional and Contact Arms. Also includes eight popular abrasive belts, three platen pads, Collet (6 mm) for Die Grinder use, plus and Wrenches. All contained in a durable carrying case. Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (373) 20, db(a) 1/8-3/4 (3-19) W x 18 (457) L 28 (793) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 4-7/8 (124) (373) 20, db(a) 1/8-3/4 (3-19) W x 20-1/2 (521) L 28 (793) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 4-7/8 (124) (373) 20, db(a) 1/8-3/4 (3-19) W x 18 (457) L 28 (793) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 4-7/8 (124) (298) 5, db(a) 1/8-3/4 (3-19) W x 18 (457) L 24 (680) 1,500 (457) 2.8 (1.2) 15-1/2 (394) 5-3/4 (146) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kits: s 40320, 40326, No ; No (page 267) 13

14 ABRASIVE BELT TOOLS.4 hp Dynafile II Air-Powered Abrasive Belt Tool Lightweight, Low Profile Version of Dynafile II.4 hp Dynafile II adds a lightweight, compact variation to Dynabrade s famous Abrasive Belt Tool line. The optimal low profile belt tool for working in tight areas! Grind, deburr, blend, finish and polish. Grind from contact wheel or platen pad; finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, glass and more. Compact, low profile housing allows easy access in tight spots and previously inaccessible areas. Grinding head pivots 360 for additional flexibility. Ergonomic 7 offset handle. Robust.4 hp air motor serves up ample power. Lightweight tool design minimizes operator fatigue and increases efficiency. Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob. CONTACT ARMS PAGE 16 COUPLER/PLUG PAGE Low Profile Design BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1/8", 1/4", 3/4" wide x 18" long (3 mm, 6 mm, 19 mm x 457 mm) SEE PAGE 270 Dynafile II easily converts to a Die Grinder with optional Collet (1/4") or Collet (6 mm). To convert to a Drill, order Chuck (1/4") For 18" Long Belts Includes Contact Arm, for coated abrasive belts 1/2" wide x 18" long (see page 16) For 18" Long Belts Includes Contact Arm for 1/2" wide x 18" long medium non-woven nylon belt (78020). Excellent for setting grain lines, achieving consistent satin finish on a variety of metals, and removing oxide and weld discoloration Rubber Drive Wheel minimizes non-woven nylon belt slippage..4 hp Dynafile II is ideal for deburring and finishing in tight areas. Optional Contact Arm offers ability to grind into contours. Arrows located on Dynafile II belt cover indicate abrasive belt direction. Grinding from the RETURN SIDE of the belt will greatly enhance tool performance and increase belt life. Optional offset Contact Arm allows belt to conform to a variety of contours. Clean and finish using non-woven nylon belts. Dynaswivel air line connector is ideal for use with most air tools. It improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 223.) Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (298) 25, db(a) 1/8-3/4 (3-19) x 18 (457) 22 (626) 5,730 (1,747) 1.9 (.86) 14 (356) 4-1/8 (105) (298) 25, db(a) 1/8-3/4 (3-19) x 18 (457) 22 (626) 5,730 (1,747) 1.9 (.86) 14 (356) 4-1/8 (105) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) 14

15 Vacuum Dynafile II Air-Powered Abrasive Belt Tool Vacuum While You Work! Includes Contact Arm for 3/4" wide x 18" long abrasive belts. Excellent for grinding, deburring, finishing and polishing. Highly portable vacuum system works on tool s exhaust CONTACT ARMS PAGE 16 COUPLER/PLUG PAGE 228 BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1/8", 1/4", 3/4" wide x 18" long (3 mm, 6 mm, 19 mm x 457 mm) SEE PAGE 270 Includes self-contained bag-within-bag dust collection system bag-within-bag system also sold separately. Air line is joined to exhaust hose for superb maneuverability. ABRASIVE BELT TOOLS Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (373) 20, db(a) 1/4-3/4 (6-19) W x ( ) L 28 (793) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 5 (127) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) Electric Dynafile II Electric-Powered Abrasive Belt Tool Electric Version of World-Famous Abrasive Belt Tool Electric Dynafile II runs coated abrasive and non-woven nylon belts, and is ideal for countless applications on metal, plastic, etc. Grind with contact wheel or platen pad. Finish and polish using slack of belt. Accepts over 20 Contact Arms (see page 16), for belts 1/8" to 3/4" wide x 18" long. Comfortable switch with lock on feature. Easily accessible brushes for quick replacement. Sanding head pivots 360, for working in previously inaccessible areas. Reversible side handle for operator comfort. Tool is double-insulated for safety, and includes electric cord, 8 feet in length. CONTACT ARMS PAGE 16 ADAPTER PAGE 16 FOR ABRASIVE BELTS 1/8", 1/4", 3/4" wide x 18" long (3 mm, 6 mm, 19 mm x 457 mm) SEE PAGE V (AC) V (AC) V (AC), 11, V (AC), 11,000 Each tool includes Contact Arm, for abrasive belts 1/2" wide by 18" long Versatility Kit 120 V (AC) Versatility Kit 220 V (AC) Includes Electric Dynafile II with Contact Arm, and two additional arms (11202 and 11204). Also includes eight abrasive belts of various grits, and an assortment of platen pads. All items contained in a durable carrying case Maximum Watts Out Abrasive Belt Size Voltage Current Amps Phase Frequency , /4-3/4 (6-19) W x ( ) L 120 V (AC) /60 Hz 5 (2.3) 19 (483) 5-1/2 (140) , /4-3/4 (6-19) W x ( ) L 220 V (AC) 3,4 1 50/60 Hz 5 (2.3) 19 (483) 5-1/2 (140) Additional Specifications: Maximum 2,520 SFPM (768 SM/Min) 15

16 ABRASIVE BELT TOOLS Dynafile II Contact Arms For Air and Electric s - 4" to 17" Workable Reach All rubber Contact Wheels are 70 durometer, unless noted. Optional Adapter allows use of 24" long belts. Extends reach to 7" when used with standard contact arms Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) Work on broad areas 1/2" x 18" Leave in-line scratch 5/8" dia. x 3/8" wide, rubber 1/2" wide; Blend spot welds Soft PSIG maximum 1/2" x 18" Enter channels as 5/16" dia. x 3/8" wide, steel 1/2" wide; small as 7/16" Thin Enter 5/16" x 3/4" 1/4" x 18" openings 5/8" dia. x 1/8" wide, rubber 1/4" wide; Soft Order for heavy-duty version. Standard on s 1/2" x 18" , and 5/8" dia. x 3/8" wide, rubber 1/2" wide; Soft Grind over contact wheel or platen 11204, Unique offset design 1/8", 1/4" 11204: Wheel, None Strap polishing is easy or 1" dia. x 3/8" wide, 70 duro with this arm 1/2" x 18" 11305: Wheel, 1" dia. x 3/8" wide, 40 duro (Both wheels radiused rubber) Order for heavy-duty version. Standard on s 5/8" or , 40320, /4" x 18" 3/4" dia. x 5/8" wide, rubber 3/4" wide; and Hard 11220, 11300, 11301, PSIG maximum 11220: 11220: None Offset design and minia- 5/8" or 5/16" dia. x 5/8" wide, steel ture contact wheels 3/4" x 18" 2" strap polish in offset All Others: 11300: None area; polish turbine 1/2" x 18" 1/4" dia. x 3/8" wide, steel blades and other contours 11301: None 5/16" dia. x 3/8" wide, steel 11341: None 5/16" dia. x 3/8" wide, rubber Grind corners, enter 1/8" or None grooves, strap polish 1/4" x 18" 1" dia. x 3/8" wide, V shape wheel urethane, tapered Optional Steel 1/2" x 24" Platen Pad available 5/8" dia. x 3/8" wide, rubber 1/2" wide; 6-3/4" workable reach Soft Standard on 5/8" or and /4" x 20-1/2" 3/4" x 5/8" wide, rubber 3/4" wide; Grind on wheel or Hard platen 5-1/4" reach 16

17 Dynafile II Contact Arms For Air and Electric s - 4" to 17" Workable Reach All rubber Contact Wheels are 70 durometer, unless noted. Optional Adapter allows use of 24" long belts. Extends reach to 7" when used with standard contact arms Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) Work on broad areas; 1/2" x 18" The Banana Arm levels in-line scratch; 5/8" dia. x 3/8" wide, rubber 1/2" wide; blend stainless Hard USA Government National Stock No Heavy-duty steel 1/2" x 18" Grind over contact 5/8" dia. x 3/8" wide, rubber 1/2" wide; wheel or platen Soft ABRASIVE BELT TOOLS PSIG maximum 1/4" x 18" File round openings 5/16" dia. x 1/8" wide, steel 1/4" wide; as small as 7/16" Soft For flat grinding using 1/2" x 18" 5/8" dia. x 3/8" wide, rubber Offset Arm platen at or near 1/2" wide; corners and edges of Hard large radius round Contact wheel is offset to prevent gouging PSIG maximum 1/2" x 18" Work on contact wheel 7/16" dia. x 3/8" wide, rubber 1/2" wide; or platen pad Soft Guide-cut 1/2" x 18" None Removes raised material 60 to 80 grit 5/8" dia. x 3/8" wide, rubber within.020" or less without undercutting For flat grinding and 1/2" x 18" heavy stock removal 5/8" dia. x 3/8" wide, rubber Steel Platen Extra length arm 1/2" x 44" " workable reach 5/8" dia. x 3/8" wide, rubber 1/2" wide; Soft Enter 1/2" x 1/2" 1/4" x 18" openings 7/16" dia. x 1/8" wide, brass 1/4" wide; Thin Enter channels as 1/2" x 18" narrow as 9/16" 7/16" dia. x 3/8" wide, steel 1/2" wide; Thin PSIG maximum 3/4" x 34" Optional Excellent for cleaning 5/16" dia. x 5/8" wide, steel 3/4" wide oxide off electrical bus bars Arm has a 12" workable reach Unique offset design 1/2" x 18" None Grind over contact 5/8" dia. x 3/8" wide, rubber wheels or strap polish 17

18 ABRASIVE BELT TOOLS Mini-Dynafile II Air-Powered Abrasive Belt Tool Ideal for Strap Polishing and Working in Narrow Openings For 12" Long Belts Tool includes Contact Arm for 1/2" wide x 12" long abrasive belts and Drive Wheel. (See page 19 for additional Contact Arms.) Lightweight ergonomic design handle features 7 offset. Multi-position grinding head pivots 360. Rear exhaust tool directs some air to front, to cool abrasive belt while running. Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob. CONTACT ARMS PAGE 19 COUPLER/PLUG PAGE 228 BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1/8", 1/4", 1/2" wide x 12" long (3 mm, 6 mm, 13 mm x 305 mm) SEE PAGE For added versatility, tool can be easily converted to Die Grinder with optional (1/4") ed Collet Insert. Ideal for blending stainless steel and grinding right angle welds. Effective for finishing and deburring within narrow openings Rubber Drive Wheel may be ordered separately, for efficient use with optional non-woven nylon belts Versatility Kit Tool (15118 Drive Wheel) with Contact Arm for 1/2" wide x 12" long abrasive belts. Also includes and Arms. (See page 19 for all Contact Arms.) Clean and finish using non-woven nylon belts. Finish rough-cut edges quickly and efficiently. Includes ed Collet Insert to easily convert tool to 1/4" Die Grinder. Assorted coated and non-woven nylon belts; durable carrying case Mini-Dynafile II now includes Swiveling Belt Guard, allowing easy abrasive belt change without removing the guard! Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (298) 25, db(a) 1/8-1/2 (3-13) W x 12 (305) L 20 (566) 4,890 (1,486) 1.8 (.8) 11-3/4 (298) 3-1/2 (89) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 1/4" (6 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) 18

19 Mini-Dynafile II Contact Arms 3" Workable Reach; Exclusive to Mini-Dynafile II All rubber Contact Wheels are 70 durometer, unless noted. Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) 15025, No platen due to 1/4" or 15025: Wheel, None offset design 1/2" x 12" 1" dia. x 3/8" wide, Grind radiuses 40 duro rubber Offset for 15028: Wheel, slack polishing 1" dia. x 3/8" wide, 70 duro rubber ABRASIVE BELT TOOLS Standard on 1/2" x 12" /8" dia. x 3/8" wide, rubber 1/2" wide; Grind corners, Hard enter grooves Sand on both sides 1/4" x 12" of arm 5/8" dia. x 1/8" wide, rubber 1/4" wide; Enter confined areas Hard as small as 1/4" Grind corners, enter 1/8" x 12" None grooves and 1" dia. x 3/8" wide, urethane strap polish PSIG maximum 1/2" x 12" Enter channels as 5/16" dia. x 3/8" wide, steel 1/2" wide; narrow as 7/16" Thin PSIG maximum 1/2" x 13" Work on contact wheel 7/16" dia. x 3/8" wide, rubber 1/2" wide; or platen pad Thin PSIG maximum 1/2" x 12" None Grind, blend and 1/4" dia. x 3/8" wide, steel polish turbine blades PSIG maximum 1/4" x 12" None Grind, polish turbine 5/16" dia. x 3/8" wide, rubber blades and other contours 19

20 ABRASIVE BELT TOOLS Dynafile III Air-Powered Abrasive Belt Tool Excellent for Grinding Welds, Blending and Deburring For 18" Long Belts Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal. Tool includes high-efficiency Rubber Drive Wheel, ideal for use with all abrasive belts. Includes Contact Arm for 1" wide x 18" long belts (see page 23). Tool grinding head pivots 360. Soft grip handle assembly allows operator to apply additional force to contact wheel. Handle also offers enhanced control and maneuverability. Optional safety-lock throttle lever is available CONTACT ARMS PAGE 22 COUPLER/PLUG PAGE 228 BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1/4", 1/2", 3/4", 1" wide x 18" long, (6 mm, 13 mm, 19 mm, 25 mm x 457 mm) SEE PAGE 270 Below: Strap sanding with optional Arm Several Dynafile III Contact Arms serve a dual purpose. These Arms are REVERSIBLE to allow for platen sanding OR strap polishing. (See page 22.) Dynafile II Contact Arms may also be used with Dynafile III. (See page 16.) Utilized for blending scratch patterns and grinding right angle welds Contact Arm with serrated wheel allows aggressive removal Versatility Kit Includes Dynafile III with 15321, and Contact Arms (see page 23), plus assortment of abrasive belts, spare Drive Wheel, wrenches and hex keys, all in durable carrying case Dynaswivel air line connector is ideal for use with most air tools. It improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 223.) Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (522) 20, db(a) 1/4-1 (6-25) W x 18 (457) L 32 (906) 4,550 (1,382) 3.5 (1.6) 14-1/4 (362) 4-7/8 (124) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) 20

21 Dynafile III Air-Powered Abrasive Belt Tool Lightweight s With Popular Contact Arms Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal. s 15400, and do not include side handle, reducing tool weight and allowing greater maneuverability. (53163 side handle is available as an option.) All models include high-efficiency Rubber Drive Wheel, ideal for use with all abrasive belts. Tool grinding head pivots For 18" Long Belts Includes Contact Arm for belts 5/8" or 3/4" wide x 18" long (see page 22) Dynafile III allows finishing and deburring in restricted areas. CONTACT ARMS PAGE 22 COUPLER/PLUG PAGE 228 BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1/4", 1/2", 3/4", 1" wide x 18" long, (6 mm, 13 mm, 19 mm, 25 mm x 457 mm) SEE PAGE tool (below) includes unique Contact Arm with hand guide. ABRASIVE BELT TOOLS For 20-1/2" Long Belts Includes Contact Arm for belts 5/8" or 3/4" wide x 20-1/2" long (see page 22) For 24" Long Belts Includes Contact Arm with extended reach, for belts 1/4" to 1" wide x 24" long (see page 23). Extended reach is ideal for use on concave areas of large turbine blades, and many other applications. Soft grip handle assembly allows operator to apply additional force to contact wheel. Handle mounts in three positions, providing enhanced control and maneuverability For 24" Long Belts Includes Contact Arm with unique 4" diameter wheel (see page 22), for grinding or blending right angle welds and fillet welds. Contact Arm includes hand guide for additional control. Saves time and reduces costs! Grinds corner welds with no undercutting. Tool accepts belts 24" long, in widths of 1/4" or 1/2" Arrows located on Dynafile III belt cover indicate abrasive belt direction. Grinding from the RETURN SIDE of the belt will greatly enhance tool performance and increase belt life. Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (522) 23, db(a) 1 (25) W x 24 (610) L 34 (906) 4,550 (1,382) 3.35 (1.52) 12-3/4 (324) 7-1/8 (181) (522) 20, db(a) 5/8 (16) or 3/4 (19) W x 18 (457) L 32 (906) 4,550 (1,382) 2.5 (1.1) 14-1/4 (362) 4-7/8 (124) (522) 20, db(a) 5/8 (16) or 3/4 (19) W x 20.5 (521) L 32 (906) 4,550 (1,382) 2.5 (1.1) 15-1/2 (394) 4-7/8 (124) (522) 20, db(a) 1/4 (6) or 1/2 (13) W x 24 (610) L 32 (906) 4,550 (1,382) 2.5 (1.1) 14 (356) 4-7/8 (124) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kits: No (page 267) 21

22 ABRASIVE BELT TOOLS Dynafile III Contact Arms 4" to 6-3/4" Workable Reach All rubber Contact Wheels are 70 durometer, unless noted. Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) Work on broad areas 1/2" x 18" Leave in-line scratch 5/8" dia. x 3/8" wide, rubber 1/2" wide; Blend stainless Soft Standard on s 1/2" x 18" and /8" dia. x 3/8" wide, rubber 1/2" wide; Grind over contact Soft wheel or platen Order for heavy-duty, or for steel platen version 11204, Unique offset design 1/8", 1/4" 11204: Wheel, None Strap polishing is easy or 1" dia. x 3/8" wide, 70 duro, with this arm 1/2" x 18" radiused rubber 11305: Wheel, 1" dia. x 3/8" wide, 40 duro, radiused rubber Standard on s 5/8" or , /4" x 18" 3/4" dia. x 5/8" wide, rubber 3/4" wide; and Hard Order for heavy-duty steel construction version Optional Steel 1/2" x 24" Platen Pad available 5/8" dia. x 3/8" wide, rubber 1/2" wide; 6-3/4" workable reach Soft Standard on s 5/8" or and /4" x 20-1/2" 3/4" dia. x 5/8" wide, rubber 3/4" wide; Grind on wheel or platen Hard 5-1/4" reach For flat grinding using 1/2" x 18" Offset Arm platen at or near 5/8" dia. x 3/8" wide, rubber 1/2" wide; corners and edges of Hard large radius round Contact wheel is offset to prevent gouging bus bars Perfectly designed to 1/4" or 1/2" None reach up to 2" in a x 24" 70 durometer channel 4" dia. x 1/2" wide, Great for use with radiused rubber scalloped edge For use on Dynafile III only abrasives, blending weld seams (see page 21) 22

23 Dynafile III Contact Arms 4" to 6-3/4" Workable Reach All rubber Contact Wheels are 70 durometer, unless noted. Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) For flat grinding using 1" x 18" platen pad 3/4" dia. x 7/8" wide, rubber 1" wide; Soft ABRASIVE BELT TOOLS Allows for longer reach 1" x 24" Grind using platen pad 3/4" dia. x 7/8" wide, rubber 1" wide; Soft Standard on 1" x 18" durometer 1" wide; Reversible arm - arm 2" dia. x 1" wide, rubber Soft can be flipped to allow for platen sanding or strap polishing Reversible arm - arm 1" x 18" can be flipped to allow 70 durometer 1" wide; for platen sanding or 2" dia. x 1" wide, rubber Soft strap polishing Reversible arm - arm 1" x 18" can be flipped to allow 40 durometer 1" wide; for platen sanding or 2" dia. x 5/8" wide, rubber Soft strap polishing Reversible arm - arm 1" x 18" can be flipped to allow 2" dia. x 1" wide, rubber 1" wide; for platen sanding or Soft strap polishing V shape wheel Standard on 1" x 24" None durometer Allows for longer reach 1" dia. x 1" wide, Grind using wheel serrated rubber surface Great for strap 1" x 24" None polishing 70 durometer 2" dia. x 1" wide, rubber 23

24 ABRASIVE BELT TOOLS Dynabelter Air-Powered Abrasive Belt Tool For Weld Grinding, Blending and Finishing on Metal and Other Surfaces Dynabelter is ideal for work on ferrous and non-ferrous metals, wood, plastic, stone and composites. Uses include grinding cylinders, deburring castings, cleaning welds and fabricating metals. Also excellent for polishing tubing, deburring structural steel, finish-dimensioning on lathe work and blending inside corners. Safety-lock lever included on all models. CONTACT ARMS PAGE 26 COUPLER/PLUG PAGE 228 BENCH MOUNT PAGE 255 FOR ABRASIVE BELTS 1", 2" wide x 30" long (25 mm, 51 mm x 762 mm) SEE PAGE 272 After attaching new abrasive belt, hold tool by the Contact Wheel and suspend tool vertically, to ensure that the belt is taut. Then tighten knob and flip tension lever Standard Duty,.7 hp Accepts 1" wide x 30" long abrasive belts. Adjustable speed; removable side handle. Includes Contact Arm Assembly (see page 26). Ideal for use with 1/4" Dynaswivel and Coupler/Plug Assembly Heavy-Duty, 1.2 hp Accepts 1" wide x 30" long abrasive belts. Includes Contact Arm Assembly (see page 26), and top control handle. Ideal for use with 3/8" Dynaswivel and Coupler/Plug Assembly. USA Government National Stock Extra Heavy-Duty, 2.0 hp Accepts 2" wide x 30" long abrasive belts. Includes pressure bar with top control handle. Includes Contact Arm Assembly (see page 26). Ideal for use with 1/2" Dynaswivel and Coupler/Plug Assembly Contact Arm with 4" dia. contact wheel is available for 2" wide x 60" long belts, providing a 20" workable reach is ideal for grinding circumferential welds grinds weld seam and leaves in-line scratch pattern Placing Dynabelter handle at a 45º angle from the belt housing will increase pressure while grinding. Pull tool towards you, working off the RETURN SIDE of the belt for faster removal. Abrasive Belt Size Air Inlet Max. Air Flow Max. SFPM (SM/Min) (522) 18, db(a) 1/4-1 (6-25) W x 30 (762) L 1/4" NPT 32 (906) 5,890 (1,789) 7.5 (3.4) 21 (533) 7-1/4 (184) (895) 13, db(a) 1/4-1 (6-25) W x 30 (762) L 3/8" NPT 58 (1,643) 4,250 (1,295) 10 (4.5) 21 (533) 7-1/4 (184) (1,492) 7, db(a) 1-2 (25-51) W x 30 (762) L 1/2" NPT 70 (1,982) 4,700 (1,432) 14 (6.4) 21-1/2 (546) 7-3/4 (197) Additional Specifications: Hose I.D. Size 1/2" (13 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kits: No ; No ; No (page 267) 24

25 Dynabelter Accu-Grinder Air-Powered Abrasive Belt Tool with Adjust-A-Wheel Grinds Welds Flat, Without Undercutting Heavy-Duty, 1.2 hp Efficiently removes excess weld material and leaves a narrow in-line scratch pattern. This model takes the guesswork out of weld grinding, and prevents undercutting! CONTACT ARMS PAGE 26 COUPLER/PLUG PAGE 228 FOR ABRASIVE BELTS 1" wide x 30" long (25 mm x 762 mm) SEE PAGE 272 ABRASIVE BELT TOOLS Adjustable guide tires control the depth of abrasive belt cut. Simple twist-knobs adjust depth of cut. Allows controlled grinding on flats, contours and inside/outside of pipes and tanks. Includes Adjust-A-Wheel Contact Arm with 90-durometer standard serrated Contact Wheel, 2" diameter x 1" wide (see page 26). Work on Longitudinal Welds: I.D. 12" diameter pipe or larger. O.D. 8" diameter pipe or larger. Place Dynabelter handle at 45 angle from belt housing to increase grinding pressure. Pull tool toward operator for faster material removal. Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (895) 13, db(a) 1 (25) W x 30 (762) L 58 (1,643) 4,220 (1,282) 9.0 (4.1) 22 (559) 7 (178) Additional Specifications: Air Inlet 3/8" NPT Hose I.D. Size 1/2" (13 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) Dynabelter Accessories Dynabelter Adapter Dynafile Contact Arms (see pg. 11), can be mounted on and Dynabelter models with optional Adapter. Allows for work in small areas using 30" belts (8" reach) Dynabelter Contact Arm Extender Allows for longer abrasive belts! The Dynabelter uses standard 30" long abrasive belts, however, these extenders allow Contact Arms to use longer abrasive belts. Extenders can only be used with Dynabelter Contact Arms Extender For 42" belts (13" reach) Extender For 54" belts (19" reach) Extender For 60" belts (21" reach)

26 ABRASIVE BELT TOOLS Dynabelter Contact Arms Variety of Contact Wheels and Wheel Assemblies All rubber Contact Wheels are 70 durometer, unless noted. Part Comments Belt Size Contact Wheel Assembly Platen Pad (W x L) (includes bearing and shaft) (see page 29) Standard on s 1" x 30" (Included) and durometer standard serrated 1" wide; 7-1/2" workable reach rubber, 2" dia. x 1" wide Hard Grind using platen pad durometer standard serrated rubber, 2" dia. x 1" wide Grind, deburr, polish 1" x 30" over platen 80 durometer smooth rubber, 1" wide; 7-1/2 workable reach 1" dia. x 1" wide Hard Wheel mount pivots to 1" x 30" maintain surface contact Two wheels, 80 durometer 1" wide; Work on broad areas, smooth rubber, Hard blend stainless 1" dia. x 1" wide Leaves in-line scratch pattern 6" workable reach Grind, blend, polish welds 1" x 30" None Strap polish using 40 durometer smooth rubber, slack of belt (80 durometer available, 11622) 7" workable reach 4" dia. x 1" Grind, deburr fillet 1/2" or None welds, inside corners 1" wide x 70 durometer radiused rubber, 7" workable reach 30" long 4" dia. x 1/2" wide Polish contours without 1" x 30" None gouging workpiece 40 durometer serrated rubber, Ideal for stainless pipe (80 durometer wheel 11892; 7" workable reach 90 durometer wheel 11888) 4" dia. x 5/8" wide For best results when 1" x 30" None ordering Contact 90 durometer standard Arm for Dynabelter serrated urethane add: 2" dia. x 1" wide Pressure Bar - Three Mounting Screws Back Wheel Assembly Standard on 2" x 30" 2" dia. x 2" wide rubber Optional assemblies available: " dia. x 2" wide 11847: (Included) 70 durometer 2" wide urethane wheel standard serration assemblies are only for 11849: 70 durometer extra heavy-duty tools 7" workable reach scoop serration 11851: 90 durometer standard serration 11853: 90 durometer scoop serration 26

27 Dynangle Air-Powered Abrasive Belt Tool Powerful Direct-Drive Air with Adjustable Speed Compact tool is ideal for work in tight spots; handle is multi-positional. Perfect for blending radiuses and adding grain to stainless steel sinks. Quick and easy abrasive belt change. Accepts coated abrasive belts and non-woven nylon belts CONTACT ARMS BELOW COUPLER/PLUG PAGE 228 FOR ABRASIVE BELTS 1" wide x 18" long (25 mm x 457 mm) SEE PAGE 272 ABRASIVE BELT TOOLS Interchangeable Contact Arms match specific applications on stainless steel (see below). Also ideal for refinishing drilling screws and pump screws. Includes Contact Arm and Hard/Cork Dynapad Platen Pad. When working on spot welds, lower platen to avoid gouging of work surface with contact wheel. Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (522) 20, db(a) 1 (25) W x 18 (457) L 36 (1,020) 6,540 (1,987) 4.8 (2.2) 11 (279) 5 (127) Additional Specifications: Air Inlet 1/4" NPT Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) Dynangle Contact Arms Part Belt Size Contact Wheel Assembly Wheel Material Surface Use (W x L) (includes bearing and shaft) " x 18" durometer Smooth 1/2" radiused corner 1" dia. x 1" wide urethane " x 18" durometer Smooth 3/4" radiused corner 1-1/2" dia. x 1" wide urethane " x 18" durometer Standard 1" radiused corner 2" dia. x 1" wide rubber serrated 27

28 ABRASIVE BELT TOOLS Dynangle II Air-Powered Abrasive Belt Tool Polish, Grind Contours and Flats Surface conditions stainless steel and most other metals. Also used on wood, plastic, fiberglass and composites. Blends and finishes solder seams. Built-in abrasive belt guard; fast belt change COUPLER/PLUG PAGE 228 FOR ABRASIVE BELTS 2" wide x 34" or 45" long (51 mm x 864 mm, 1,143 mm) SEE PAGE 272 Safety-lock lever-throttle; hanger brackets included for optional overhead suspension Single Uses 2" x 34" belts; belts spans 11-1/2" for strap polishing up to 36" diameter pipe Conversion Kit available to upgrade single motor model to a dual motor model at a later date, if desired. NOTE: For grinding with a platen pad, dual motor models are recommended Heavy-Duty Dual with Platen Heavy-duty dual motor for extra power. Uses 2" x 34" belts; belts spans 11-1/2" for strap polishing up to 36" diameter pipe. Includes 2" wide x 6" long platen which is easily removed for strap polishing Heavy-Duty Dual with Platen Heavy-duty dual motor for extra power. Uses 2" x 45" belts; belts spans 17" for polishing pipe up to 48" diameter. Includes 2" wide x 6" long platen which is easily removed for strap polishing Dynangle II is utilized for strap polishing on a cylindrical stainless steel surface For optimum use of Dynangle II, it is critical that proper air flow is maintained. To maintain belt tension, use abrasive belts with low-flex or low-stretch backing. Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) (895) 13, db(a) 2 (51) W x 34 (864) L 53 (1,501) 8,500 (2,591) 15.1 (6.9) 18-7/8 (479) 8-1/2 (216) (1,790) 13, db(a) 2 (51) W x 34 (864) L 106 (3,002) 8,500 (2,591) 18.7 (8.2) 18-7/8 (479) 9-9/16 (243) (1,790) 13, db(a) 2 (51) W x 45 (1,143) L 106 (3,002) 8,500 (2,591) 19.2 (8.7) 22-7/8 (581) 9-1/2 (241) Additional Specifications: Air Inlet 1/2" NPT Hose I.D. Size 1/2" (13 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267 Dual motor models require two Tune-Up Kits) 28

29 Take-About Sander Air-Powered Abrasive Belt Tool Ideal for Surface ing, Graining and Finishing Heavy-duty 1.3 hp sander (3,500 ) powers 3" x 24" abrasive belts, for aggressive material removal on metal and wood. Toggle switch offers simple one-step belt tensioning. Pistol-grip handle and top control knob allow enhanced operator control. Easily adjustable tracking of abrasive belt. Tool works well with non-woven nylon belts. Safety-lock throttle lever is included COUPLER/PLUG PAGE 228 FOR ABRASIVE BELTS 3" wide x 24" long (76 mm x 610 mm) SEE PAGE 273 ABRASIVE BELT TOOLS Abrasive Belt Size Max. Air Flow Max. SFPM (SM/Min) Additional Specifications: Air Inlet 3/8" NPT Hose I.D. Size 1/2" (13 mm) Air Pressure 90 PSIG (6.2 Bar) Tune-Up Kit: No (page 267) Contact Arm Platen Pads Provide Belt Support on Dynabrade Abrasive Belt Tools (969) 3, db(a) 3 (76) W x 24 (610) L 50 (1,416) 2,000 (610) 12.5 (5.7) 13-1/4 (337) 7-1/8 (181) Soft Platen Pads Top facing Sponge base Pressure sensitive adhesive Part For Use on These Tools Width Thickness Package Quantity Dynafile, Dynafile II 1/4" 7" 1/8" Dynafile, Dynafile II, Dynafile III 1/2" 7" 1/8" Dynafile II 3/4" 7" 1/8" Dynafile III 1" 2" 1/8" 5 Hard Platen Pads Top facing Cork base Pressure sensitive adhesive Part For Use on These Tools Width Thickness For work on contoured pieces Pressure Sensitive Adhesive Mini-Dynafile II 1/4" 7" 1/8" Dynafile, Dynafile II, Mini-Dynafile II, Dynafile III 1/2" 7" 1/8" Dynafile II, Dynafile III 3/4" 7" 1/8" Dynafile 1/2" 2" 1/8" Dynabelter 1" 7" 1/8" Dynafile III 1" 2" 1/8" 5 Package Quantity Platen Pad affixed to Dynafile Contact Arm 1/8" (3 mm) For heavy deburring and polishing Pressure Sensitive Adhesive 1/8" (3 mm) Thin Platen Pads Top facing Pressure sensitive adhesive Part For Use on These Tools Width Thickness Dynafile, Dynafile II 1/4" 7" 1/32" Dynafile, Dynafile II, Mini-Dynafile II 1/2" 7" 1/32" Dynafile II 3/4" 7" 1/32" 5 Steel Platens Screw attachment Part For Use on These Contact Arms Width Thickness , (Both for Dynafile II) 1/2" 3" 1/8" * (for Dynafile ) 1/2" 3" 1/8" 1 *Includes spacers for lifting and angling of Platen 29 Package Quantity Package Quantity For use with Contact Arms with small diameter Contact Wheels (such as 11212) Pressure Sensitive Adhesive 1/32" (.8 mm) For flat grinding and heavy stock removal 1/8" (3 mm)

30 ABRASIVE BELT TOOLS Dynabrade Systems & Solutions For Abrasive Belt Tools Suggested Tool/Accessory Combinations Dynafile Page 10 TOOL ABRASIVE 24" Long Belts 1/8", 1/4", 1/2" Widths Page 270 Bench Mounts Popular Contact Arms Page , , 11216, 11218, 11219, Page 255 Dynafile II Page 13 Mini-Dynafile II Page 18 Dynafile III Page 20 18" Long Belts 1/4", 1/2", 3/4" Widths Page " Long Belts 1/4", 1/2" Widths Page " Long Belts 1/4", 1/2", 3/4", 1" Widths Page 270 Bench Mounts Popular Contact Arms 80021, , 11204, Collet Page 51 Assembly Page 255 Page 16 For Die Grinder Use Popular Contact Arms Page 19 Rubber Drive 15026, 15028, Wheel Page 18 Bench Mounts Popular Contact Arms Page , , 15326, 15350, Page 255 Dynafile III Page 21 24" Long Belts 1/4", 1/2" Widths Page 270 Bench Mounts Popular Contact Arms Page , , 15326, 15350, Page 255 Dynabelter Page 24 30" Long Belts 1" Widths Page 272 Contact Arm Adapter Extenders Page , 11657, Page 26 Page 25 Electric Dynafile II Page 15 18" Long Belts 1/4", 1/2", 3/4" Widths Page 270 Popular Contact Arms Page , 11204, Page 16 Extension Adapter ESSENTIAL Metal Capture Air Lube Dynuba 100 Dynaswivel Filter-Regulator- Downdraft Station (10W/NR) Lubricator Page Page 254 Page 254 Page Page 224 Dynuba Page 254 Coupler/Plug Assemblies 95676, Page 228 Air Hose Assemblies 94863, 94852, Page

31 ABRASIVE FINISHING TOOLS ABRASIVE FINISHING TOOLS Dynastraight...32 Lightweight Dynastraight...37 Dynastraight Flapper...38 Rolling Pin Sander...39 Mini-Dynisher...39 Dynisher...40 Electric Dynisher...41 Dyninger...42 Lightweight Dyninger...43 Systems & Solutions...45 DYNABRADE.COM

32 ABRASIVE FINISHING TOOLS Dynastraight Air-Powered Abrasive Finishing Tool For Graining, Cleaning and Polishing on Stainless Steel, Aluminum, Carbon Steel, Composites ,.7 hp , 1 hp Each model includes Combo Arbor, for up to 3" wide wheels with 5/8" or 1" diameter center hole. Arbors Slower speed achieves longer and deeper grain pattern in work surface ARBORS PAGE 248 PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 8" (203 mm) diameter SEE PAGE 269 Part Part See page 248 for detailed arbor information Dynastraight runs optional Non-Woven Nylon Wheel (see page 276). Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (522) db(a) 34 (952) 5/8" or 1" 1/4" NPT 1/2"-20 Male 4.7 (2.1) 14-7/8 (378) 1-3/4 (44) (744) db(a) 43 (1,218) 5/8" or 1" 3/8" NPT 1/2"-20 Male 5.2 (2.4) 15-3/4 (400) 1-7/8 (48) Tune-Up Kit: No ; No (page 267) Additional Specifications: Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) ,800, 1 hp Combo Arbor, for up to 3" wide wheels with 5/8" or 1" dia. center hole. Any Dynacushion pneumatic wheel with 5/8" dia. bore (such as 92938) may be mounted ,800, 1 hp ed Arbor (5/8"-11) ideal for use with optional Dynacushion Pneumatic Wheel ,800, 6" Extension, 1 hp 5/8" or 1" diameter combo arbor for up to 3" wide wheels with 5/8" or 1" diameter center hole. Any Dynacushion pneumatic wheel with 5/8" dia. bore (such as 92938) may be mounted. Cushioned grip enhances operator comfort ,800, 6" Extension, 1 hp 5/8"-11 threaded arbor accepts up to 3-1/2" wide pneumatic wheels (not included) with threaded 5/8"-11 center hole. Ideal set-up for optional Dynacushion pneumatic wheel with 5/8"-11 thread (such as 92805). Cushioned grip enhances operator comfort Wheel Sold Separately When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over-inflating the wheel can lead to chatter marks on the surface. Wheel Sold Separately Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (744) 1, db(a) 34 (952) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.2 (1.9) 13-3/8 (339) 1-7/8 (48) (744) 1, db(a) 34 (952) 5/8"-11 Male 3/8" NPT 1/2"-20 Male 3.8 (1.7) 14-7/8 (378) 1-7/8 (48) (744) 1, db(a) 34 (952) 5/8" or 1" 3/8" NPT N/A 4.6 (2.1) 17-1/4 (438) 1-7/8 (48) (744) 1, db(a) 34 (952) 5/8"-11 Male 3/8" NPT N/A 4.2 (1.9) 17-1/2 (445) 1-7/8 (48) Tune-Up Kit: No (page 267) Additional Specifications: Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) 32

33 Dynastraight Air-Powered Abrasive Finishing Tool For Graining, Cleaning and Polishing on Stainless Steel, Aluminum, Carbon Steel, Composites ,400,.7 hp Arbor for up to 2" wide x 1/2" I.D. wheels. Any accessory with 1/2" dia. bore may be mounted ,400,.7 hp Arbor for up to 2" wide x 5/8" I.D. wheels. Any accessory with 5/8" dia. bore may be mounted ,400,.7 hp ed Arbor (5/8"-11) ideal for use with optional Dynacushion Pneumatic Wheel ARBORS PAGE 248 PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 8" (203 mm) diameter SEE PAGE 269 ABRASIVE FINISHING TOOLS ,400,.7 hp Combo Arbor for up to 3" wide wheels with 5/8" or 1" dia. center hole. Any Dynacushion pneumatic wheel with 5/8" bore may be mounted (such as 92936) Versatility Kit Includes Dynastraight; Dynacushion Pneumatic Wheel; Air Chuck (1/4" NPT); Dynaswivel (1/4" NPT); Arbor; assortment of abrasives Dynastraight powers optional Dynacushion pneumatic wheel on stainless steel ,400, 1 hp Arbor for up to 2" wide x 1/2" I.D. wheels. Any accessory with 1/2" dia. bore may be mounted. Ideal set-up for optional surface conditioning discs (shown) ,400, 1 hp Arbor for up to 2" wide x 5/8" I.D. wheels. Any accessory with 5/8" dia. bore may be mounted. Arbors Part Part s and Part Disc Sold Separately See page 248 for detailed arbor information. Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (522) 3, db(a) 35 (977) 1/2" 1/4" NPT 1/2"-20 Male 3.9 (1.8) 13-5/8 (346) 1-3/4 (44) (522) 3, db(a) 35 (977) 5/8" 1/4" NPT 1/2"-20 Male 3.9 (1.8) 13-5/8 (346) 1-3/4 (44) (522) 3, db(a) 35 (977) 5/8"-11 1/4" NPT 1/2"-20 Male 3.8 (1.7) 14-5/8 (371) 1-3/4 (44) (522) 3, db(a) 35 (977) 5/8" or 1" 1/4" NPT 1/2"-20 Male 4.0 (1.8) 13-5/8 (346) 1-3/4 (44) (744) 3, db(a) 43 (1,218) 1/2" 3/8" NPT 1/2"-20 Male 4.3 (2.0) 15-1/8 (384) 1-7/8 (48) (744) 3, db(a) 43 (1,218) 5/8" 3/8" NPT 1/2"-20 Male 4.2 (1.9) 13-7/8 (353) 1-7/8 (48) Tune-Up Kit:.7 hp s No ; 1 hp s No (page 267) Additional Specifications: Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) 33

34 ABRASIVE FINISHING TOOLS Dynastraight Air-Powered Abrasive Finishing Tool For Graining, Cleaning and Polishing on Stainless Steel, Aluminum, Carbon Steel, Composites ,400, 1 hp ed Arbor (5/8" -11) ideal for use with optional Dynacushion pneumatic wheel (shown) ,400, 1 hp Combo Arbor for up to 3" wide wheels with 5/8" or 1" diameter center hole. Any Dynacushion pneumatic wheel with 5/8" dia. bore (such as 92936) may be mounted ARBORS PAGE 248 PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 8" (203 mm) diameter SEE PAGE 269 RIGHT Avoid tipping the pneumatic wheel when operating. Best results will be achieved when keeping the pneumatic wheel as flat on the surface as possible. WRONG Dynastraight powers optional Dynacushion pneumatic wheel. Arbors Part Part See page 248 for detailed arbor information ,400, 6" Extension, 1 hp 1/2" diameter arbor for up to 2" wide x 1/2" I.D. wheels. Any accessory with 1/2" diameter bore may be mounted. Ideal set-up for optional surface conditioning discs (shown). Cushioned grip enhances operator comfort ,400, 6" Extension, 1 hp Ideal set-up for optional Dynacushion wheel. Includes threaded arbor for exclusive use with up to 3-1/2" wide pneumatic wheels (wheel not included) with threaded 5/8"-11 center hole (such as 94472). Cushioned grip enhances operator comfort ,400, 6" Extension, 1 hp Combo Arbor, for up to 3" wide wheels with 5/8" or 1" diameter center hole. Any Dynacushion pneumatic wheel with 5/8" dia. bore (such as 92936) may be mounted. Cushioned grip enhances operator comfort Disc Sold Separately Dynastraight sets grain pattern in stainless steel. Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (744) 3, db(a) 43 (1,218) 5/8"-11 Male 3/8" NPT 1/2"-20 Male 4.2 (1.9) 16-1/8 (409) 1-7/8 (48) (744) 3, db(a) 43 (1,218) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.4 (2.0) 14-1/2 (369) 1-7/8 (48) (744) 3, db(a) 43 (1,218) 1/2 3/8" NPT 4.4 (2.0) 18-1/2 (471) 1-7/8 (48) (744) 3, db(a) 43 (1,218) 5/8"-11 Male 3/8" NPT 4.1 (1.9) 18-5/8 (472) 1-7/8 (48) (744) 3, db(a) 43 (1,218) 5/8" or 1" 3/8" NPT 4.7 (2.1) 18-3/4 (475) 1-7/8 (48) Tune-Up Kit: No (page 267) Additional Specifications: Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) 34

35 Dynastraight Air-Powered Abrasive Finishing Tool For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites ,500,.7 hp Arbor for up to 2" wide x 1/2" I.D. wheels. Accessories with 1/2" dia. bore (maximum speed of 4,500 ) may be mounted ,500,.7 hp Combo Arbor, for up to 3" wide wheels with 5/8" or 1" dia. center hole. Accessories with 5/8" dia. bore (maximum speed of 4,500 ) may be mounted ,500,.7 hp ed Arbor (5/8"-11), ideal for use with optional DynaWheel (5" dia. x 1" wide). See page ,500, 1 hp Arbor for up to 2" wide x 1/2" I.D. wheels ,500, 1 hp Combo Arbor for up to 3" wide wheels with 5/8" or 1" dia. center hole ,500, 1 hp ed Arbor (5/8"-11) for exclusive use with optional or DynaWheel (5" dia. x 1-1/2" wide). See page ,500, 6" Extension, 1 hp 1/2" diameter arbor for up to 2" wide x 1/2" I.D. wheels. SEE Dynastraight at Work! Arbors ARBORS PAGE 248 Part See page 248 for detailed arbor information. PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 8" (203 mm) diameter SEE PAGE Left: Optional DynaWheel on Dynastraight, for concentrated grinding and fast material removal. Part Wheel Sold Separately Part ABRASIVE FINISHING TOOLS ,500, 6" Extension, 1 hp Combo Arbor, for up to 3" wide wheels with 5/8" or 1" dia. center hole ,500, 6" Extension, 1 hp ed arbor for use with up to 3-1/4" dia. pneumatic wheels with threaded 5/8"-11 center hole. Cushioned grip enhances comfort (all extension models). s 13517, and are ideal for use with optional coated abrasive flap wheels (shown) and non-woven nylon wheels. Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (522) 4, db(a) 40 (1,133) 1/2" 1/4" NPT 1/2"-20 Male 3.9 (1.8) 13-5/8 (346) 1-3/4 (44) (522) 4, db(a) 40 (1,133) 5/8" or 1" 1/4" NPT 1/2"-20 Male 4.0 (1.8) 13-5/8 (346) 1-3/4 (44) (522) 4, db(a) 40 (1,133) 5/8"-11 Male 1/4" NPT 1/2"-20 Male 4.0 (1.8) 13-5/8 (346) 1-3/4 (44) (744) 4, db(a) 41 (1,161) 1/2" 3/8" NPT 1/2"-20 Male 4.3 (2.0) 15-1/8 (384) 1-7/8 (48) (744) 4, db(a) 41 (1,161) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.4 (2.0) 15-1/2 (370) 1-7/8 (48) (744) 4, db(a) 41 (1,161) 1/2" 3/8" NPT 4.4 (2.0) 18-1/2 (471) 1-7/8 (48) (744) 4, db(a) 41 (1,161) 5/8" or 1" 3/8" NPT 4.7 (2.1) 18-3/4 (475) 1-7/8 (48) (744) 4, db(a) 41 (1,161) 5/8"-11 Male 3/8" NPT 4.4 (2.0) 18-5/8 (472) 1-7/8 (48) (744) 4, db(a) 41 (1,161) 5/8"-11 Male 3/8" NPT 1/2"-20 Male 4.3 (2.0) 14-1/2 (366) 1-7/8 (48) Tune-Up Kit:.7 hp s No ; 1 hp s No (page 267) Additional Specifications: Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) 35

36 ABRASIVE FINISHING TOOLS Dynastraight Kits Versatility Kits with Finishing Tool and DynaWheel For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites Versatility Kit Dynastraight (4,500 ), with ed Arbor (5/8-11) DynaWheel (5" dia. x 1" wide), ideal for heavy-duty applications Coated Abrasive Belt (60 grit), 1" wide x 15-1/2" long. Also includes Air Chuck, for controlled inflation of hard-to-reach valve assemblies. 1/4" female NPT. (See page 244.) Versatility Kit Dynastraight (4,500 ), with ed Arbor (5/8"-11) DynaWheel (5" dia. x 1-1/2" wide), ideal for heavy-duty applications. Three Coated Abrasive Belts (60 grit), 1-1/2" wide x 15-1/2" long. Also includes Air Chuck, for controlled inflation of hard-to-reach valve assemblies. 1/4" female NPT. (See page 244.) Dynaswivel air line connector is ideal for use with most air tools. It improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 223.) Dynastraight Kit All Kits on page also include Air Chuck! (see page 244) Versatility Kits with Finishing Tool and Dynacushion Wheel For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites Versatility Kit Dynastraight (3,400 ), with ed Arbor (5/8"-11) Dynacushion (5" dia. x 3-1/2" wide), ideal for a variety of applications Coated Abrasive Belt (120 grit), 3-1/2" wide x 15-1/2" long. NEW Coated Abrasive Belt (180 grit), 3-1/2" wide x 15-1/2" long Non-Woven Nylon Belt (medium), 3-1/2" wide x 15-1/2" long. Also includes Air Chuck, for controlled inflation of hard-to-reach valve assemblies. 1/4" female NPT. (See page 244.)

37 Dynastraight Air-Powered Abrasive Finishing Tool For Material Removal on Stainless Steel, Aluminum, Carbon Steel, Composites ,000, 1 hp Combo Arbor, for up to 3" wide wheels with 5/8" or 1" diameter center hole. Ideal for use with optional Dynacushion Pneumatic Wheel (3-1/4" dia. x 3" wide x 5/8" bore) ,000, 6" Extension, 1 hp ed arbor for use with up to 3-1/4" diameter pneumatic wheels with threaded 5/8"-11 center hole (such as Dynacushion ). Cushioned grip enhances operator comfort ARBORS PAGE 248 PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 8" (203 mm) diameter SEE PAGE 269 Arbor Part ABRASIVE FINISHING TOOLS Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (744) 6, db(a) 44 (1,256) 5/8" or 1" 3/8" NPT 1/2"-20 Male 4.3 (2.0) 14-1/2 (369) 1-7/8 (48) (744) 6, db(a) 44 (1,256) 5/8"-11 Male 3/8" NPT N/A 4.4 (2.0) 18-5/8 (472) 1-7/8 (48) Tune-Up Kit: No (page 267) Additional Specifications: Hose I.D. Size 3/8" (10 mm) Air Pressure 90 PSIG (6.2 Bar) Lightweight Dynastraight Air-Powered Abrasive Finishing Tool Tough, Lightweight Tool for Consistent Finishes All models include Multi-Purpose Arbor for mounting optional abrasive wheels 1/2" to 3" wide (1/2" increments) with 5/8" or 1" center hole ,.4 hp Accepts optional accessories with 5/8" bore. Also speed-mated for 8" dia. sanding stars. An ideal way to whitewood sand, sealer sand and defuzz ,200,.4 hp ,000,.4 hp Ideal for 1/2" to 3" wide abrasive impregnated non-woven nylon wheels. Achieves smooth finishes on stainless steel and composites used in kitchen and bath industries. Mount Abrasive Belts with optional Dynacushion Pneumatic Wheel (3-1/4" dia. x 3" wide x 5/8" bore). s and only. Many Dynastraight operators find that it is easier to achieve a straight-line pattern by moving the tool in a faster back-and-forth stroke. Arbor Part FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 8" (203 mm) diameter SEE PAGE Dynastraight shown with optional Dynacushion pneumatic wheel. Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (298) db(a) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 2.2 (1.0) 13-1/4 (337) 1-5/8 (40) (298) 3, db(a) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 2.2 (1.0) 11-1/2 (292) 1-5/8 (40) (298) 5, db(a) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 2.2 (1.0) 11-1/2 (292) 1-5/8 (40) Tune-Up Kit: No (page 267) Additional Specifications: Hose I.D. Size 1/4" (6 mm) Air Pressure 90 PSIG (6.2 Bar) 37

38 ABRASIVE FINISHING TOOLS Dynastraight Air-Powered Abrasive Finishing Tool For Polishing Insides of Pipe and Tubing; Excellent for Light Deburring Remove rust, oxide and scale; clean welds, remove paint and surface condition using abrasive flap wheels. Adjustable speed, lever throttle, front exhaust ,000,.5 hp Includes Flap Wheel Adapter. Shown with optional Abrasive Flap Wheel, 2-1/2" dia. x 1" wide ,000,.5 hp Includes 1/4" collet. Flapper Wheel Sold Separately COUPLER/PLUG PAGE 228 FOR ABRASIVE FLAP WHEELS Up to 3" (76 mm) diameter SEE PAGE 282 Dynaswivel air line connector is ideal for use with most air tools. It improves tool maneuverability, minimizes operator fatigue and extends hose life. (See page 223.) ,000, 8" Extension,.5 hp Includes Adapter. Shown with optional Abrasive Flap Wheel, 2-1/2" dia. x 1" wide Wheel Sold Separately IMPORTANT: Speed of tool must not exceed maximum operating speed of accessory. Always wear eye, face and body protection. Maximum Air Flow Hose I.D. Size Air Inlet Tool (373) 18, db(a) 30 (850) 3/8 (10) 1/4" NPT 5/16"-24 Female 1.8 (0.8) 7 (178) 1-3/4 (44) (373) 18, db(a) 30 (850) 3/8 (10) 1/4" NPT 5/16"-24 Female 3.4 (1.5) 17-1/8 (435) 1-7/8 (48) (373) 18, db(a) 24 (680) 3/8 (10) 1/4" NPT 5/16"-24 Female 1.5 (0.7) 7 (178) 1-7/8 (48) Tune-Up Kit: No (51134 No ) (page 267) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) HIGHEST QUALITY! FREE ON-SITE DEMOS! FASTEST SHIPPING! BEST SERVICE! Discover The Dynabrade Difference! Dynabrade.com 38

39 Rolling Pin Sander Air-Powered Abrasive Finishing Tool For Sanding and Finishing on Contoured Shapes ,200,.4 hp Unique offset handle to control torque. Includes Pneumatic Wheel, 3-1/4" dia. x 7" long. Wheel inflates to 20 PSI max. Designed for use with coated abrasive and non-woven nylon belts. Wheel conforms to wood and metal, and easily inflates/deflates for quick abrasive belt change. Use only Inflation Tool (see page 243) COUPLER/PLUG PAGE 228 PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS 7" wide x 10-11/16" long (178 mm x 271 mm) SEE PAGE 273 ABRASIVE FINISHING TOOLS Maximum Air Flow Hose I.D. Size Air Inlet Tool (298) 3, db(a) 24 (668) 3/8 (10) 1/4" NPT 5/8"-11 Male 5 (2.3) 17-3/4 (452) 3-1/4 (83) Tune-Up Kit: No (page 267) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) Mini-Dynisher Air-Powered Abrasive Finishing Tool Achieves Superior In-Line Finishes on Metal Powers optional Dynacushion pneumatic wheel. Finish virtually any shape, contour or material, including stainless steel, aluminum, carbon steel, copper, brass, plastic, fiberglass, composites, wood, etc. DYNASWIVEL PAGE 223 PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS 3" wide x 10-11/16" long (76 mm x 271 mm) SEE PAGE ,.4 hp Ideal for use with optional Dynacushion pneumatic wheel (3-1/4" dia. x 3" wide). Accepts abrasive belts 3" wide x 10-11/16" long ,200,.4 hp Ideal for use with optional Dynacushion pneumatic wheel (3-1/4" dia. x 3" wide). Accepts abrasive belts 3" wide x 10-11/16" long. Shroud allows for up to 4-1/2" diameter accessories Versatility Kit Mini-Dynisher ; Dynacushion pneumatic wheel (3-1/4" dia. x 3" wide); Wheel Inflation Tool; ceramic coated aluminum oxide belt and medium grade non-woven nylon belt Mini-Dynisher powers optional Dynacushion pneumatic wheel on stainless steel Maximum Air Flow Wheel Arbor Diameter Hose I.D. Size Air Inlet (298) 3, db(a) 21 (595) 5/8" 1/4 (6) 1/4" NPT 2.8 (1.3) 10 (254) 7 (178) (298) db(a) 21 (595) 5/8" 1/4 (6) 1/4" NPT 3.4 (1.5) 10 (254) 7 (178) Tune-Up Kit: No (page 267) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) 39

40 ABRASIVE FINISHING TOOLS Dynisher Air-Powered Abrasive Finishing Tool Achieves Superior In-Line Finishes on Metal ,400,.7 hp Excellent for blending and finishing stainless steel and other metals, leaving an in-line scratch pattern. Operator uses back-and-forth motion; guard can be adjusted for work right up to side walls. Arbor (3/4" dia.) included for mounting a variety of abrasives and accessories. Variable speed control and safety-lock lever throttle. Ideal for use with optional Dynacushion pneumatic wheel (5" dia. x 3-1/2" wide) COUPLER/PLUG PAGE 228 PNEUMATIC WHEELS PAGE 244 FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 5" (127 mm) diameter SEE PAGE Versatility Kit Includes Dynisher with Dynacushion pneumatic wheel (5" dia. x 3-1/2" wide), two abrasive belts and Air Chuck ,400,.7 hp, Metric For use with optional Dynacushion pneumatic wheel (90 mm x 100 mm wide) Versatility Kit Metric Includes Dynisher with Dynacushion pneumatic wheel (90 mm x 100 mm wide), two abrasive belts and Air Chuck. Wheel Sold Separately ,800, 1 hp Ideal set-up for optional Dynacushion pneumatic wheel (5" dia. x 3-1/2" wide). Great for refinishing stainless steel sinks, stainless steel kitchen countertops, etc. Slower speed achieves deeper and longer grain pattern in work surface Versatility Kit Includes Dynisher; Dynacushion pneumatic wheel; Air Chuck; 80-grit belt; medium-grade belt; Grease Gun; Grease and Gear Oil When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over-inflating the wheel can lead to chatter marks on the surface Dynisher powers optional Dynacushion pneumatic wheel. Maximum Air Flow Wheel Arbor Diameter Hose I.D. Size Air Inlet (522) 3, db(a) 41 (1,161) 3/4" (19 mm) 3/8 (10) 1/4" NPT 4.5 (2.0) 13-1/2 (343) 9 (229) (522) 3, db(a) 41 (1,161) 3/4" (19 mm) 3/8 (10) 1/4" NPT 4.5 (2.0) 13-1/2 (343) 9 (229) (744) 2, db(a) 41 (1,161) 3/4" (19 mm) 3/8 (10) 3/8" NPT 5.7 (2.6) 15 (381) 7 (180) Tune-Up Kit:.7 hp s No ; 1 hp No (page 267) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) 40

41 Electric Dynisher Electric-Powered Abrasive Finishing Tool Achieves Superior In-Line Finishes on Metal V (AC), 3,000 Ideal for graining, blending, brushing and polishing. Utilized in a variety of industries, on stainless steel and other metals, as well as plastic, composites and more. Variable tool speed of 0-3,000. Operator can pre-select speed to suit each application. Electronic module maintains specified tool speed under load. Variable speed trigger allows operator to control speed from 0 to selected setting. Operator moves tool in easy front-to-back motion, for achieving in-line scratch pattern. Tool guard is adjustable for most efficient use. 5/8"-11 spindle and 3/4" arbor allow mounting of a variety of accessories and abrasives. Tool accepts optional Dynacushion Pneumatic Wheel (5" dia. x 3-1/2" wide) and Non-Woven Nylon Wheels. Great versatility! Strong 835-watt power output gets the job done fast! Wheel Sold Separately 120 V (AC) PNEUMATIC WHEELS PAGE 244 ARBORS PAGE 248 FOR ABRASIVE BELTS, CONDITIONING DISCS, FLAP WHEELS Up to 5" (127 mm) diameter SEE PAGE 269 C US ABRASIVE FINISHING TOOLS Electric Dynisher fitted with optional Dynacushion Pneumatic Wheel and coated abrasive belt. An ideal setup for achieving in-line scratch pattern on stainless steel. RIGHT Avoid tipping the pneumatic wheel when operating. Best results will be achieved when keeping the pneumatic wheel as flat on the surface as possible. WRONG When using pneumatic wheels, inflate wheel only enough to hold the abrasive belt without slippage. Over-inflating the wheel can lead to chatter marks on the surface. Voltage Current Amps Phase Frequency , (1,342) 120 V (AC) Hz 9.5 (4.31) 17 (432) 8 (203) 41

42 ABRASIVE FINISHING TOOLS Dyninger Air-Powered Abrasive Finishing Tool Sand, Defuzz, Blend, Scuff, Denib ,.4 hp High torque air motor includes arbor (1" dia.) for mounting up to six coated abrasive stars, 8" diameter with 1" center hole (sold separately). Excellent for blending and scuffing sealer coatings on contours and flat surfaces. Whitewood sand raised panels, turnings, moldings and hard-to-reach areas. Defuzz wooden grid pattern panels and denibbing raised grain. Great for light deburring of metal. Extended rear exhaust muffler design DYNASWIVEL PAGE 223 FOR ABRASIVE STARS 8" (203 mm) diameter SEE PAGE 284 Stars Sold Separately Basic Versatility Kit Dyninger with 1" dia. arbor Six Coated Abrasive Stars (120 grit) Six Coated Abrasive Stars (320 grit) Abrasive Dressing Plate Deluxe Versatility Kit Dyninger with 1" dia. arbor Six Coated Abrasive Stars (120 grit) Six Coated Abrasive Stars (320 grit) Abrasive Dressing Plate Dynamount Tool Bench Mount Speed Control For best performance of all sanding stars, prior to application dress the abrasive tips against optional Stainless Steel Abrasive Dressing Plate or equivalent. Also, a piece of hardwood such as oak will do. Dressing will break the stiffness, or flex the abrasives, resulting in a more consistent finish. Sanding Stars are ideal for work on intricate profiles. Maximum Air Flow Wheel Arbor Diameter Air Inlet Tool (298) db(a) 22 (623) 5/8" or 1" 1/4" NPT 3/8"-24 Male 3.7 (1.7) 11-1/8 (283) 2-3/4 (70) Tune-Up Kit: No (page 267) Additional Specifications: Hose I.D. Size 1/4" (6 mm) Air Pressure 90 PSIG (6.2 Bar) 42

43 Lightweight Dyninger Air-Powered Abrasive Finishing Tool Use with Spindle-Mount, Arbor-Mount and Eyelet Sanding Stars For whitewood/sealer sanding, light deburring of metal, or fabrication and finishing of composite surfaces. Excellent for use on wooden parts, moldings, raised panels and intricate profiles. Eliminates raised grain and removes loose fibers when whitewood sanding as well as scuffing sealer coats. Tool includes extended rear exhaust muffler and Air-Flow Control Dynaswivel fitting for maximum tool maneuverability and control ,200,.4 hp, 1/4" Collet ,200,.4 hp, 6 mm Collet Mount 4" diameter spindle-mount abrasive sanding stars with 1/4" shank, or Eyelet Dy-Cut sanding stars. (Stars sold separately, see page 284.) COUPLER/PLUG PAGE 228 FOR ABRASIVE STARS 3/4" to 4" diameter (19 mm to 102 mm dia.) SEE PAGE 284 Stars Sold Separately ABRASIVE FINISHING TOOLS The grit and spacing of arbor-mount stars (below) determine sanding aggressiveness. We suggest trying various grit and spacing combinations Lightweight Dyninger with optional spindle-mount stars ,200,.4 hp, Arbor-Mount For running arbor-mount abrasive stars or Dynacushion wheel. Includes Arbor (1/2" diameter) for mounting up to five 4" diameter arbor-mount sanding stars (1/2" center hole). Arbor includes spacers to be used between the stars for added flexibility. (Stars sold separately, see page 284.) Tool includes extended rear exhaust muffler and Air-Flow Control Dynaswivel fitting for maximum tool maneuverability and control. Least Aggressive/Most Flexible Stars Sold Separately Most Aggressive/Less Flexible Lightweight Dyninger with single arbor-mount star attached. NOTE: The rated of a mounted sanding star is reduced when using flexible shafts. When using the flex shaft for finishing inside diameters, place the eyelet sanding star inside the workpiece, then start the tool. Maximum Air Flow Hose I.D. Size Air Inlet Tool (298) 0-3, db(a) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.2 (1.0) 9-1/4 (235) 1-5/8 (40) (298) 0-3, db(a) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.2 (1.0) 9-1/4 (235) 1-5/8 (40) (298) 0-3, db(a) 22 (623) 1/4 (6) 1/4" NPT 3/8"-24 Male 2.2 (1.0) 8-3/4 (222) 1-5/8 (40) Tune-Up Kit: No (page 267) Additional Specifications: Air Pressure 90 PSIG (6.2 Bar) 43

44 ABRASIVE FINISHING TOOLS Eyelet Sanding Stars and Mandrels Ideal for Deburring and Polishing Hard-to-Reach Areas For Use with Lightweight Dyninger Eyelet sanding stars are available in the following diameters: 3/4", 1", 1-1/2", 2", 3" and 4". Use with Lightweight Dyninger models and 52051, and Die Grinder models. Excellent for wooden parts, moldings, raised panels and intricate profiles. Eliminates raised grain and removes loose fibers when whitewood sanding as well as scuffing sealer coats. Provides uniform, smooth surface for achieving the best top coats. Metalworking applications include setting in-line scratch on stainless steel. Polish and deburr inside diameters of pipe and tubing. 4" Dia. 3" Dia. 2" Dia. 3" Eyelet Sanding Star easily enters pipe elbow using 7" long flexible mandrel. Sand and deburr inside small dia. pipe and other hard to reach areas with 3/4" 1-1/2" stars. 1" Dia " Flexible Shaft Mandrel " Mandrel The grit and spacing of these stars determine sanding aggressiveness. We suggest trying various grit and spacing combinations. NOTE: The rated of a mounted sanding star is reduced when using flexible shafts. When using the flex shaft for finishing inside diameters, place the eyelet sanding star inside the workpiece, then start the tool. Star Diameter Female ALUMINUM OXIDE COATED ABRASIVES 80 Grit 120 Grit 150 Grit 180 Grit 220 Grit 320 Grit 400 Grit Package Quantity STAR MANDREL 3" 7" 3/4" " /2" " 1/4" " 1/4" " 1/4"

45 Dynabrade Systems & Solutions For Abrasive Finishing Tools Suggested Tool/Accessory Combinations Dynastraight ,400,.7 hp, Side Handle Page 33 Dynastraight ,400, 1 hp, Side Handle Page 33 TOOL ABRASIVE 15-1/2" Long Belts 3-1/2" Width Page 273 6" Dia. DynaStrip Discs 1/2" Center Hole Page 280 Arbor Dynacushion Coupler/Plug Assy Page 248 Page Page Arbor Page 248 Coupler/Plug Assy. Dynaswivel Page 228 Page 223 ABRASIVE FINISHING TOOLS Extension Dynastraight ,400, 1 hp, Side Handle Page 34 Dynastraight ,500,.7 hp, (Optional DynaWheel) Page 35 Dynisher ,800, 1 hp, 1/2" Bore Page 40 Electric Dynisher ,000 Page /2" Long Belts 2-3/4" Width Page /2" Long Belts 1-1/2" Width Page /2" Long Belts 3-1/2" Width Page /2" Long Belts 3-1/2" Width Page 273 Arbor Dynacushion Dynaswivel Page 248 Page 244 Page 223 Arbor DynaWheels Dynaswivel , Page 248 Page Page Gear Oil Dynacushion Dynaswivel Page 254 Page 244 Page 223 Dynacushion Handle Assembly Page Page 253 ESSENTIAL Grease Grease Gun CLEO Belts , 91499, CLEO Polishing Compounds Multi-Purpose Arbor Page 254 Page 254 Page 288 Page Page 248 Low Flow Air Chuck Page

Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)

Model. Reach into areas as small as 3/8. Model. Max. Air Flow SCFM (L/Min) The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and

More information

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27

More information

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495)

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495) ABRASIVE BELT TOOLS APTOOL.RU Phone: +7 (495) 723-19-55 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts

More information

Dynabrade Portable Abrasive Belt Tools

Dynabrade Portable Abrasive Belt Tools Dynabrade Portable Abrasive Belt Tools Grind, Deburr, Blend, Clean, Polish and Finish Reorder No. D08.02R We offer a diverse line of products to help you get the job done. With expert knowledge, service

More information

INDUSTRIAL POWER TOOLS

INDUSTRIAL POWER TOOLS Reorder No. D10.10 INDUSTRIAL POWER TOOLS Continued Leadership In Portable Abrasive Power Tool Technology www.dynabrade.com INTRODUCTION Who We Are Since 1969, Dynabrade has earned a reputation of excellence

More information

.4 hp Die Grinders & Disc Sanders

.4 hp Die Grinders & Disc Sanders .4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head

More information

Two-Step System for Clear Coat Repair

Two-Step System for Clear Coat Repair Two-Step System for Clear Coat Repair With Buffing Time REDUCED by up to 40%! Reorder No. D10.09 NEW Random Orbital Sander and Dynabuffer with Exciting Innovations Proven Method for Repairing Surface Defects

More information

Two-Hand Tool Series from Dynabrade

Two-Hand Tool Series from Dynabrade Two-Hand Tool Series from Dynabrade Random Orbital, Gear-Driven and Dual Action Sanders Reorder No. D04.05 Efficient Pneumatic Motor Offers Increased Power Advanced Design Allows Optimum Comfort and Control

More information

Dynabrade Vacuum Tools and Accessories

Dynabrade Vacuum Tools and Accessories Dynabrade Vacuum Tools and Accessories Breathe Easy and Work Safe with Dynabrade Reorder No. D12.16 Dynabrade Vacuum Tools... Dynabrade s complete line of Vacuum Tools and Accessories efficiently capture

More information

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital... Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55

More information

Portable Air Tools for the Value-Minded Professional

Portable Air Tools for the Value-Minded Professional Reorder No. D05.09 Red Portable Air Tools for the Value-Minded Professional Includes Abrasive Belt Tools, Die Grinders, Disc Sanders, Buffers and More DynaZip Air Tools (See Page 2) 18255 DynaZip Air Tool

More information

Dynabrade Vacuum Cut-Off Wheel Tools

Dynabrade Vacuum Cut-Off Wheel Tools Dynabrade Vacuum Cut-Off Wheel Tools Efficiently Capture Dust and Debris While Cutting Reorder No. D07.12 Ideal for Effective Cutting through Fiberglass, Composites, More Vacuum Shroud Diverts Dust and

More information

RANDOM ORBITAL SANDERS

RANDOM ORBITAL SANDERS RANDOM ORBITAL SANDERS Dynorbital Supreme...148 Wet Dynorbital Supreme...150 Dynorbital Silver Supreme...152 Dynorbital-Spirit...154 HiVac Dynorbital-Spirit...156 Swirl-Free Checklist...157 Two-Hand Dynorbital...157

More information

Accessories Intro.qxd:Layout 1 9/27/06 5:50 PM Page 1

Accessories Intro.qxd:Layout 1 9/27/06 5:50 PM Page 1 Accessories Intro.qxd:Layout 1 9/27/06 5:50 PM Page 1 Air Supply Accessories...160 Arbors...186 Carbide Burrs and Carbide Burr Kits...189 Collets and Inserts...190 Contact Wheels and Assemblies...196 Couplers,

More information

Reorder No. EUR11.12

Reorder No. EUR11.12 Reorder No. EUR11.12 CATALOGUE & PRICE LIST FOR DISTRIBUTORS REFINISH SOLUTIONS AUTOMOTIVE AFTERMARKET 2016 RESHAPING YOUR WORLD WITH WORLDWIDE MARKET LEADERSHIP WORLD CLASS PRODUCT INNOVATIONS CUTTING

More information

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD94 53 Models: 11462 Standard Duty/Finisher Dynabelter 11475 Standard Duty 11476 Heavy Duty 1" Wide Abrasive Belt Capacity! WARNING 1

More information

CCESSORIES OOL A AIR T 222

CCESSORIES OOL A AIR T 222 AIR TOOL ACCESSORIES AIR TOOL ACCESSORIES Air Line Assemblies - Flexible, Swivel-Style...226 Air Line Assemblies - Lightweight...225 Air Line Fittings...227 Air Motor Tune-Up Kits...267 Arbors, Accessories...248

More information

Dynabuffer...82 Two-Step Repair System " Dia. Buffers "-8" Buffers...87

Dynabuffer...82 Two-Step Repair System  Dia. Buffers -8 Buffers...87 Dynabuffer...82 Two-Step Repair System...83 3" Dia. Buffers...84 5"-8" Buffers...87 6"-8" Buffers...88 Straight-Line Buffer...89 Electric Buffer...89 Random Orbital Polishers/Head Kit...90 82 Dynabuffer

More information

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod Effective Serial Number Reference Table Model Number Serial Number 40320, 40321 36300 40326 1284 40330 3001 40335 1129 Models: 40320 Standard Machine 40326 20-1/2" Long Belt Machine 40330 Vacuum Machine

More information

KEY. Oil. Grease. Loctite/Hernon: L 2 = Hernon #940. Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Threaded Insert

KEY. Oil. Grease. Loctite/Hernon: L 2 = Hernon #940. Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Threaded Insert Model: 11000 11001 Versatility Kit 11003 w/benchmount O L T Oil KEY G Grease Loctite/Hernon: L 2 = Hernon #940 Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Parts Page Reorder No. PD97 01

More information

3,200 RPM Angle-Head WARNING

3,200 RPM Angle-Head WARNING Model: 50046 Angle-Head Kit 54002 Mini-Dynorbital Sander 54003 Mini-Dynorbital Sander 50223 2" Disc Sander 51091 Die Grinder 53026 Drill 50047 3" Buffer 50070 Finesse Sanding Kit Parts Page Reorder No.

More information

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites 950 RPM Model 13200.7 hp Model 13500 1 hp 13071 Combo Arbor for up to 3" wide wheels with a 5/8" or 1" dia.

More information

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101 Pencil Grinders...92 0.33 hp, 0.4 hp Die Grinders...95 0.4 hp Die Grinders...96 0.5 hp Die Grinders...101 0.55 hp Die Grinder...104 0.7 hp Die Grinders...105 1.0 hp Die Grinders...107 92 Pencil Grinders

More information

Vacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders...

Vacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders... Non-Vacuum s Pencil Grinders...47 Quick-Change Pencil Grinder...49.4 hp Die Grinders...52.5 hp Die Grinders...59.55 hp Die Grinder...62.7 hp Die Grinders...63 1 hp Die Grinders...67 Vacuum s Central Vacuum

More information

WARNING DYNABRADE. Air Powered Abrasive Belt Machine

WARNING DYNABRADE. Air Powered Abrasive Belt Machine For Serial No.9I1001 and Higher Parts Page Reorder No. PD00 50 Effective June, 2000 Supercedes PD96 16 66402 Tool Post Grinder Instruction Manual Air Powered Abrasive Belt Machine! WARNING Always operate,

More information

Effective January, 2000 Supercedes PD95 54 Models: 3 = Loctite #242, A 9 = Loctite #587. Models: Standard Machine, NWN Machine 16 A 9

Effective January, 2000 Supercedes PD95 54 Models: 3 = Loctite #242, A 9 = Loctite #587. Models: Standard Machine, NWN Machine 16 A 9 For Serial No. 9K2915 and Higher Parts Page Reorder No. PD00 05 O Oil: O 1 = Air Lube KEY Effective January, 2000 Supercedes PD95 54 Models: G Grease: = Loctite #771 40320 Standard Machine A Adhesive:

More information

Dynafile III. Tool Assembly. Parts Page Reorder No. PD05 16 Effective March, Models:

Dynafile III. Tool Assembly. Parts Page Reorder No. PD05 16 Effective March, Models: Parts Page Reorder No. PD05 16 Effective March, 2005 Models: Dynafile III 15400 Basic ool w/11206 Contact Arm 15401 Basic ool w/11287 Contact Arm Air Motor and Machine Parts Always operate, inspect and

More information

MEMBER. Try our new toll-free Consumer Information Number: DYNABRADE

MEMBER. Try our new toll-free Consumer Information Number: DYNABRADE Reorder No. A03.01 2 DYNABRADE FULL ONE-YEAR WARRANTY Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from

More information

Sanders, Buffers & Polishers Introduction

Sanders, Buffers & Polishers Introduction Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc

More information

Dynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION

Dynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION Dynaswivel Air Connectors Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM Aluminum and Stainless Steel Construction Single Pivot Right angle single-pivot swivels 360 at one location.

More information

Dynorbital Supreme II Update Notice

Dynorbital Supreme II Update Notice For Use With All: Dynorbital Supreme II Models Parts Page Reorder No. PD01 67 Effective July, 2001 Dynorbital Supreme II Update Notice Balancer Shaft Revision OLD Configuration NEW Configuration 1 2 A

More information

Reorder No. EUR07.07

Reorder No. EUR07.07 Reorder No. EUR07.07 The Dynabrade Difference Quality Inside and Out Dynabrade Full Two-Year Warranty Following the reasonable assumption that any inherent defect which might prevail in a product will

More information

For Serial No. 2Axxxx and Higher For Type A Tools Serial No. xxxxxxa and Higher

For Serial No. 2Axxxx and Higher For Type A Tools Serial No. xxxxxxa and Higher 60,000 RPM Models: Model 51700 (1/8" Collet) Model 51701 (3mm Collet) Model 51702 (3/32" Collet) Model 51770 (1/16" Collet) 50,000 RPM Models: Model 51703 (1/8" Collet) Model 51704 (3mm Collet) Model 51705

More information

20. Avoid gaseous areas. Do not operate portable electric tools in Warning:

20. Avoid gaseous areas. Do not operate portable electric tools in Warning: For Serial No. 0A1000 and Higher Parts Page Reorder No. PD01 94 Effective November, 2001 Supersedes PD96 09 Models: Electric Dynafile II 40500 120 V / 60 Hz 40501 Kit 120 V / 60 Hz Abrasive Machine! WARNING

More information

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Versatility Grinder Tool Manual Safety, Operation and Maintenance Parts Page Reorder No. PD07 Effective June, 007 Supersedes PD0 A HP Variable Speed Models: 64900 (5v) Phase 50/60 Hz 6490 (0v) Phase 50/60

More information

Supplying the Aerospace, Defense & Metal Working Industries Since 1951!

Supplying the Aerospace, Defense & Metal Working Industries Since 1951! Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA

More information

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7 & 9 GRINDERS AND SANDERS WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS Rebel series grinders and sanders are powerful tools designed to overcome

More information

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs 3M Collision Repair Solutions 3M Abrasives and Power Tools Cutting & Grinding for Body Techs 3M Disc Sander Ideal for general metal fabrication applications, including grinding, blending, weld leveling

More information

95979 Pin Lever O-Ring (2) Valve Stem Speed Regulator or Recessed Speed Regulator

95979 Pin Lever O-Ring (2) Valve Stem Speed Regulator or Recessed Speed Regulator Models: 57000-3-1/2" Non-Vacuum 57023-5" Vac-Ready w/overskirt 57001-3-1/2" Basic Vacuum 57024-5" Central Vac-Ready w/overskirt 57002-3-1/2" Deluxe Vacuum 57026-6" Non-Vacuum 57003-3-1/2" Vac-Ready 57027-6"

More information

Supplying the Aerospace, Defense & Metal Working Industries Since 1951!

Supplying the Aerospace, Defense & Metal Working Industries Since 1951! Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA

More information

Slow Speed Dynafile II

Slow Speed Dynafile II For Serial No. 1D1000 and Higher Parts Page Reorder No. PD01 54 Effective June, 2001 Slow Speed Dynafile II Models: 40381 Slow Speed Dynafile II Air Motor and Machine Parts! WARNING Always operate, inspect

More information

Versatility Grinder Tool Manual Safety, Operation and Maintenance

Versatility Grinder Tool Manual Safety, Operation and Maintenance Versatility Grinder ool Manual Safety, Operation and Maintenance SAVE HIS DOCUMEN, EDUCAE ALL PERSONNEL Parts Page Reorder No. PD0 Effective June, 00 HP Variable Speed Models: 4900 (v) Phase 0/0 Hz 490

More information

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING Electric Dynafile II Parts Page Reorder No. PD02 42 Effective August, 2002 For Serial No. 2H1000A and Higher Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Models:

More information

Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption

Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption 3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight

More information

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders Redefining The Finish Line 3M Elite Series Sanders NEW Elite Series Air-Powered Sanders and NEW Electric

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

15003, Tool Assembly. Note: Shaded parts represent Housing Assembly Vacuum Tool Assembly

15003, Tool Assembly. Note: Shaded parts represent Housing Assembly Vacuum Tool Assembly For Serial No. 1B1000 and Higher Parts Page Reorder No. PD01 29 Effective March, 2001 Supercedes PD97 64 Models: Mini-Dynafile II 15002 Vacuum ool 15003 Basic ool with Drive Wheel 15006 Versatility Kit

More information

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND WARNING

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND   WARNING Dynorbital Supreme Parts Page Reorder No. PD12 32 Effective November, 2012 Supersedes PD09 03 For Serial No. 12K1000B and Higher 12,000 RPM Air Powered Random Orbital Sander Air Tool Manual Safety, Operation

More information

Electric Portable Dry Vacuums

Electric Portable Dry Vacuums Electric Portable Dry Vacuums For use with air tools setup for two-tool operation. A cost-effective solution versus overhead central-vac systems. Quiet operation only 76 db(a). Variable Vacuum Control

More information

Angle & Vertical Grinders

Angle & Vertical Grinders Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed

More information

Industrial. Ready when you are. RediPower. Tools

Industrial. Ready when you are. RediPower. Tools RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid

More information

WARNING. Air-Powered, 2,400 RPM. AUTOMOTIVE Parts Page Reorder No. APD01 06 Effective April, 2001 Supercedes APD97 02 Palm-Style Buffer/Sander

WARNING. Air-Powered, 2,400 RPM. AUTOMOTIVE Parts Page Reorder No. APD01 06 Effective April, 2001 Supercedes APD97 02 Palm-Style Buffer/Sander Models: 090 Buffer 09 Mini Orbital Sander 09 Versatility Kit 09 4"-5" Buffer AUOMOIVE Parts Page Reorder No. APD0 06 Effective April, 00 Supercedes APD97 0 Palm-Style Buffer/Sander Air-Powered,,400 RPM!

More information

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING Electric Dynafile II Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Models: 40590 120 V / 60 Hz 40591 Versatility Kit (Contains Model 40590, Accessories and Carrying

More information

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND WARNING

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND  WARNING Dynorbital-Spirit Parts Page Reorder No. PD09 01 Effective February, 2009 Supersedes PD07 07 For Serial No. 09B1000G and Higher 12,000 RPM Air Powered Random Orbital Sander Air Tool Manual Safety, Operation

More information

100,000 RPM Pencil Grinder

100,000 RPM Pencil Grinder For Serial No. 10C1000A and Higher 100,000 RPM Pencil Grinder Models: 51810 (1/8" Collet) 51811 (1/16" Collet) 51812 (3/32" Collet) 51813 (3mm Collet) Air Tool Manual Safety, Operation and Maintenance

More information

E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM

E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM For a high-quality finish every time, experts rely on JET grinders, sanders and finishing machines. Because your complete satisfaction is

More information

SMALL DIAMETER WHEELS

SMALL DIAMETER WHEELS SMALL DIAMETER WHEELS CUTTING & SNAGGING WHEELS FOR DIE GRINDERS Get the most demanding jobs done right and done fast. 800.835.9999 / weilerabrasives.com SELECTING THE RIGHT WHEEL MAX PERFORMANCE SUPERIOR

More information

Mini-Dynorbital Silver Supreme Sander Air Tool Manual Safety, Operation and Maintenance

Mini-Dynorbital Silver Supreme Sander Air Tool Manual Safety, Operation and Maintenance Mini-Dynorbital Silver Supreme Sander Air Tool Manual Safety, Operation and Maintenance Parts Page Reorder No. PD10 18 Effective April, 2010 Air Powered Sander SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

More information

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING

Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING Versatility Grinder Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Parts Page Reorder No. PD05 1 Effective March, 2005 1 HP Variable Speed Model: 641 (20v) 1 Phase

More information

Air Tools. 1/4 Angle Die Grinder

Air Tools. 1/4 Angle Die Grinder Air Tools Everbrite Abrasive Pte Ltd Blk 5026, Ang Mo Kio Industrial Park 2, #01-91, Singapore 569529 Tel: 64847582 Fax: 64849570 hlp://everbriteabrasive.net email:enquiry@everbriteabrasive.net 1/4 Angle

More information

MINI AIR ANGLE DIE GRINDER

MINI AIR ANGLE DIE GRINDER MINI AIR ANGLE DIE GRINDER Model 33171 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by: 3M Abrasive Systems Random Orbital Abrasive Disc Portfolio Sanding & Finishing Solutions! cs NsEivW e Dis Abra see inside Distributed by: The 3M Value The RIGHT Abrasives NEW Products NEW! Look for this

More information

3M Power Tools, Abrasives and Accessories. 3M Power Tools. Abrasives Tools from the Abrasives Experts

3M Power Tools, Abrasives and Accessories. 3M Power Tools. Abrasives Tools from the Abrasives Experts 3M Power Tools, Abrasives and Accessories 3M Power Tools Abrasives Tools from the Abrasives Experts 3M Power Tool Warranty Warranty and Limited Remedy: 3M warrants this tool against defects in workmanship

More information

MT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12" H.S.S.

MT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12 H.S.S. MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MT07 ITEM NO. MT03 MEASURING TAPES HIGH IMPACT ABS CASE W/ RUBBER PROTECTED RUBBER COVERED CASE, COMFORTABLE SIZE MEASURING TAPES INNER PC/BOX PACKING

More information

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)

More information

The FLEX Giraffe. Light as air and best by far.

The FLEX Giraffe. Light as air and best by far. The FLEX Giraffe. Light as air and best by far. Warranty FLEX North America limited ONE YEAR WARRANTY FLEX North America warrants its Professional Power Tools for a period of one year from the date of

More information

Parts Page Reorder No. PD03 26 Effective July, Hp Slow Speed Extension Die Grinder. Air Tool Manual Safety, Operation and Maintenance

Parts Page Reorder No. PD03 26 Effective July, Hp Slow Speed Extension Die Grinder. Air Tool Manual Safety, Operation and Maintenance Parts Page Reorder No. PD03 26 Effective July, 2003 1Hp Slow Speed Extension Die Grinder Governor Controlled Models: 52672 3,400 RPM, with 1/4" Collet 52673 4,500 RPM, with 1/4" Collet 52692 3,400 RPM,

More information

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way

More information

Model 35 PARTS MANUAL

Model 35 PARTS MANUAL Model 35 PARTS MANUAL Version 3-2007 Ashland Industries Inc. 1115 Rail Drive P.O. Box 717 Ashland, WI. 54806 Ph: 877-634-4622 Toll Free Ph: 715-682-4622 Fx: 715-682-9717 www.ashlandind.com Model 35 Scraper

More information

ANGLE DIE GRINDER KIT

ANGLE DIE GRINDER KIT ANGLE DIE GRINDER KIT Model 93157 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Machine Deals. The Complete 3M System: The Right Machine + The Right Abrasive + The Right Accessory = Outstanding Result

Machine Deals. The Complete 3M System: The Right Machine + The Right Abrasive + The Right Accessory = Outstanding Result Machine Deals. Industries that work with metal face many different demands but they all share the same needs to raise quality levels and reduce production times and costs whilst achieving demanding standards.

More information

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber

More information

3M Metalworking Systems Power Tools, Accessories and Abrasives. Advanced. Metalworking Solutions

3M Metalworking Systems Power Tools, Accessories and Abrasives. Advanced. Metalworking Solutions 3M Metalworking Systems Power Tools, Accessories and Abrasives Advanced Metalworking Solutions Grit. Guts. Get it All. 3M Metalworking Systems With the addition of the new line of powerful, lightweight

More information

14", 18" & 24" Fiberglass Turbo Fans Installation & Operator s Instruction Manual

14, 18 & 24 Fiberglass Turbo Fans Installation & Operator s Instruction Manual 14", 18" & 24" Fiberglass Turbo Fans Installation & Operator s Instruction Manual 09484:09#52

More information

Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING

Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING Router.7 Hp/Straight-Line/Front Exhaust Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL PartsPage Reorder No. PD03 12R Effective, 20 Supersedes PD03.12 Models:

More information

ALWAYS A WINNING HAND

ALWAYS A WINNING HAND ALWAYS A WINNING HAND NORTON ABRASIVES AND TOOLS An operator s and production foreman s perfect tool: our new Norton pneumatic die grinder quickly and comfortably accomplishes many portable applications

More information

Abrasive Blast Cabinet Assembly & Operating Instructions

Abrasive Blast Cabinet Assembly & Operating Instructions 3951103 Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important

More information

Material Removal Tools

Material Removal Tools Material Removal Tools mdi - Manufacturers Distributor, Inc Phone: (813) 241-4900 Fax: (813) 571 0422 www.dotcosales.com Sales@DotcoSales.com Model Number Index Model Page 10B1200-32 43 10B2500-01 16 10L1000-36

More information

Buffer 8125 Owner s Manual

Buffer 8125 Owner s Manual 3M Buffer 8125 Owner s Manual A table of contents: A. SAFETY INFORMATION 1 B. OPERATING INSTRUCTION 4 C. SPARE PARTS INFORMATION (exploded view) 5 D. DISASSEMBLY METHOD 7 E. ASSEMBLY METHOD 10 F. GUIDELINE

More information

SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE

SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE Abrasive Index Straight Die Grinders......................... 25 Right Angle Die Grinders...................... 26 23 SIOUX TOOLS FORCE PRODUCT CATALOG Make Easy

More information

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL. SFPM (SM/Min)

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL. SFPM (SM/Min) 3 Wheel Belt Grinder Parts Page Reorder No. PD.36 Effective October 0 SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Model Number Motor hp FLA Voltage Phase Frequency SFPM (SM/Min) Sound Level Weight Pound

More information

AIR TOOLS & ACCESSORIES AIR TOOLS & ACCESSORIES HI-FLO COUPLERS AIR TOOLS & ACCESSORIES ACCESSORIES. Hi-Flo & Couplers

AIR TOOLS & ACCESSORIES AIR TOOLS & ACCESSORIES HI-FLO COUPLERS AIR TOOLS & ACCESSORIES ACCESSORIES. Hi-Flo & Couplers HI-FLO Increased airflow to provide maximum torque and optimal performance Push-To-Connect for easy connect/disconnect Includes (1) Male Coupler, (2) Female Couplers, (3) Female Plugs, and (4) Male Plugs

More information

POLISHER KIT Model 95030

POLISHER KIT Model 95030 3 PNEUMATIC POLISHER KIT Model 95030 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

Mini Tools. Less is more.

Mini Tools. Less is more. Mini Tools Less is more. THE PERFECT COMBINATION OF PERFORMANCE AND CONVENIENCE IN THE PALM OF YOUR HAND Do more with less. The Ingersoll Rand family of mini air tools perfectly complements our existing

More information

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions 3M Industrial Products Abrasives and Power Tools for Welders Welding Solutions What s New for2011 3 4 1 2 5 6 1 2 3 3M Cubitron II Fibre Discs 987C The coolest way to increase productivity. If you work

More information

18 GAUGE FLOORING STAPLER. Models: /13

18 GAUGE FLOORING STAPLER. Models: /13 18 GAUGE FLOORING STAPLER Models: 7560 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

DISC BRAKE CALIPER TOOL SET

DISC BRAKE CALIPER TOOL SET DISC BRAKE CALIPER TOOL SET 40732 ASSEMBLY AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL 25,000 RPM Pencil Grinder Models: 52861 (1/8" Collet) 52862 (3mm Collet) 52863 (1/4" Collet) 52864 (6mm Collet) Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

More information

MISSION. To create and serve customers with quality products and service that meet or exceed their expectations. HISTORY

MISSION. To create and serve customers with quality products and service that meet or exceed their expectations. HISTORY MISSION SIOUX TOOLS FORCE PRODUCT CATALOG MISSION To create and serve customers with quality products and service that meet or exceed their expectations. HISTORY A History of Success Sioux Tools has a

More information

Please visit for the latest version of these installation instructions.

Please visit  for the latest version of these installation instructions. Please visit www.blueox.com for the latest version of these installation instructions. BX2265 Attachment Tab Height: 12.5 Serial Number Attachment Tab Width: 23 Please read BOTH these and the General Information

More information

25 GALLON PORTABLE OIL LIFT

25 GALLON PORTABLE OIL LIFT 25 GALLON PORTABLE OIL LIFT Model 92859 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

For maximum material removal with minimum effort, choose the best tool.

For maximum material removal with minimum effort, choose the best tool. RediPower For maximum material removal with minimum effort, choose the best tool. How to select your Grinder Collet grinders Choose your tool, then your accessory: carbide burrs, mounted points, brushes,

More information

SUBMERSIBLE MINI-PUMP

SUBMERSIBLE MINI-PUMP SUBMERSIBLE MINI-PUMP Model 41287 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

B DUAL DRUM SANDER

B DUAL DRUM SANDER OWNER S MANUAL B2022-25 DUAL DRUM SANDER INDEX GENERAL SAFETY INSTRUCTIONS Page 3 Specifications Page 4 Features Page 5 Assembly Instructions Initial Assembly Page 6 Installing Abrasives Page 7 Adjusting

More information

Product Information. 36 & RM Series ROSS CONTROLS

Product Information. 36 & RM Series ROSS CONTROLS Product Information oot Operated Valves 36 & RM Series ROSS CONTROLS Manual Valves Pedal & Treadle Heavy-Duty 36 Series 3-Way 2-Position Valves, Pedal, Spring Return NPT Threads BSPP Threads 1-2 2-3 1/4

More information

MICHIGAN PNEUMATIC TOOL

MICHIGAN PNEUMATIC TOOL MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders

More information

MODEL EGA220 OWNERS MANUAL

MODEL EGA220 OWNERS MANUAL 1/4 MINI RATCHET MODEL EGA220 OWNERS MANUAL www.eaglecompressor.com 1-800-551-2406 READ THE ENTIRE MANUAL BEFORE PUTTING THIS TOOL IN SERVICE Limited Air Tool Warranty Wood Industries, Inc. warrants air

More information

SBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions

SBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions SBCNNS Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

MODEL 7400 STRUT SPRING COMPRESSOR

MODEL 7400 STRUT SPRING COMPRESSOR MODEL 7400 STRUT SPRING COMPRESSOR Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV112712 P/N: 81-0103A TABLE OF

More information

MODEL 7600 STRUT SPRING COMPRESSOR

MODEL 7600 STRUT SPRING COMPRESSOR MODEL 7600 STRUT SPRING COMPRESSOR Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV6162014 P/N: 81-0246 TABLE OF

More information