JUMPSTART MODEL NO: JS900/JS910 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC10/16

Size: px
Start display at page:

Download "JUMPSTART MODEL NO: JS900/JS910 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: & GC10/16"

Transcription

1 JUMPSTART MODEL NO: JS900/JS910 PART NO: & OPERATING & MAINTENANCE INSTRUCTIONS GC10/16

2 INTRODUCTION Thank you for purchasing this CLARKE Jump-start. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. Please keep these instructions in a safe place for future reference. SPECIFICATIONS Item Weight Insulation Class Max Output Current Battery Type Lighter Socket output Estimated engine starting capacity Working lamp Air Compressor Max output (JS910) Specification 9.5 kg Class II Starting 400A Peak 900A Sealed re-chargeable lead-acid 12V/18AH 12V DC /1.9A for 20 hours Up to 3litres (diesel or petrol) Screw-in 12V/3.6W 16 bar (240psi) Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights. 2

3 GENERAL SAFETY RULES 1. Always ensure when jump-starting that there is air circulating around the machine. 2. Never allow the negative and positive leads on this unit, to touch each other or to touch the same metal object. 3. Although the jump-start is water resistant and may be used outdoors, DO NOT leave it exposed to the elements. Avoid direct sunlight, direct heat, rain/moisture etc. 4. The JS910 jump-start is designed for use with 12V systems. 5. Do not operate the jump-start if any of the cables are damaged. Consult your Clarke dealer for repair or replacement of the parts. 6. Do not operate the jump-start if the case is damaged. Consult your Clarke dealer or a qualified person for inspection and repair. 7. Ensure the vehicle battery posts and battery clamps are perfectly clean before use. 8. When connecting the jump-start leads to a battery, ensure the ON/OFF switch is OFF, and ALWAYS connect the RED, (positive + ) output conductor to the UNEARTHED (+) battery terminal FIRST, then connect the BLACK, (negative) conductor to a suitable earthing point on the chassis, well away from any fuel lines. 9. To prevent the battery overheating and consequent damage, do not exceed our recommendations for the duration of jump starting. 10. Always wear suitable protective clothing and eye protection when working with lead-acid batteries. 11. The jump-start is NOT designed to be used as a replacement for the vehicle battery. 12. DO NOT attempt to BOOST CHARGE the jump-start's sealed battery. 13. Never allow the battery to become completely discharged. 14. Never allow the cables to become wrapped around the operator or any other person. 15. Never attempt any repairs yourself. If you have a problem with the jumpstart contact your local CLARKE dealer. 16. Always keep your body and clothing dry. Never work in damp area without adequate insulation against electric shock. 17. Never operate the compressor for more than 10 minutes, then wait a further 10 minutes before continuing. 3

4 18. Never jump-start the engine whilst the jump-start is being charged. 19. Always store the jump-starter out of reach of children. 20. Always wear safety glasses when working with lead acid batteries. 21. If splashed by battery acid, immediately flush the area of the splash with clean water. If a burning sensation is felt or any blistering occurs, seek medical help. 22. If acid comes into contact with the eyes, flush the eyes with clean water continuously and seek medical help. WARNING: ALL LEAD ACID BATTERIES GENERATE HYDROGEN GAS DURING NORMAL OPERATION. THIS PROCESS INCREASES DURING A PERIOD OF RAPID DISCHARGE, SUCH AS WHEN USING FOR JUMP - STARTING. WARNING: HYDROGEN GAS AND BATTERY ACID (SULPHURIC ACID) CAN BE: EXPLOSIVE, CORROSIVE TO SKIN, EYES AND HAIR, DAMAGING TO CLOTHING AND METALS, FLAMMABLE, POISONOUS TO BREATHE ENVIRONMENTAL RECYCLING POLICY Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE. In effect, this means that this product must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility. ELECTRICAL SYMBOLS DISPLAYED Class II appliance without an earth connection Always read instructions before use Electrical hazard due to exposed live terminals Chemical Hazard from battery acid 4

5 ELECTRICAL CONNECTIONS This product is provided with a 13 amp, 230 volt (50Hz), charging adaptor for connection to a standard, domestic electrical supply. Should the plug need changing at any time, ensure that a plug of identical specification is used. This product is of double insulated design. No earth conductor is provided. No earth conductor is provided. The two wires in the mains lead should be wired up in accordance with the following colour code: Blue Neutral Brown Live Connect the BROWN coloured cable to the plug terminal marked a letter L. Connect the BLUE coloured cable to the plug terminal marked a letter N. If the battery charger for this appliance is fitted with a plug which is moulded on to the electric cable (i.e. non-rewireable) please note: 1. The plug must be thrown away if it is cut from the electric cable. There is a danger of electric shock if it is subsequently inserted into a socket outlet. 2. Never use the plug without the fuse cover fitted. 3. Should you wish to replace the fuse cover, ensure that the correct replacement is used (as indicated by marking or colour code). 4. Replacement fuse covers can be obtained from your local Clarke dealer or most electrical stockists. FUSE RATING The fuse in the plug must be replaced with one of the same rating and this replacement must be ASTA approved to BS1362. If in any doubt, consult a qualified electrician. DO NOT attempt any electrical repairs yourself. 5

6 COMPONENT IDENTIFICATION The JS900 & 910 is a rechargable power supply which can be used to start a car in the event of a flat battery. The unit can also be used to power electrical appliances via a cigarette lighter type socket using the adaptor supplied. The unit also incorporates a built-in lamp and may be used as a stand alone light source. An audible warning will sound in the event of low battery voltage, or if the clamps are incorrectly fitted for jump starting (wrong polarity). The integral The integral air compressor (JS910) is ideal for pumping up tyres on the vehicle. 1 Positive Battery Connecting Lead to connect to positive battery terminal 2 Lamp to provide light for roadside repairs or emergency situations Volt Charger to charge the internal battery pack 4 Cigar Lighter Adaptor complete with 5 Amp fuse. 5 Voltage Meter to indicate the voltage level of the units battery. 6 Lamp ON/OFF Switch. Switches the lamp ON or OFF. 7 Cigar Lighter Socket for use with the cigar lighter adapter provided. 6 8 Voltage Test Switch. Press to indicate internal battery power level 9 12 DC Socket connects the 230 Volt charger for mains charging. 10 Negative Battery Connection Lead - connect to the negative terminal. 11 Air Compressor On/Off Switch 12 Air Pressure Gauge 13 Adaptors for connecting the air line to different applications 14 Compressed Air Hose/connector

7 INITIAL BATTERY CHARGING 1. Charge your jump-start battery before using it for the first time. 2. Recharge the jump-start battery after every occasion of use if possible, and thereafter, at least every 30 days. 3. Always avoid leaving your jump-start in a discharged state. FOLLOW THE ABOVE POINTS TO ENSURE MAXIMUM LIFE FROM THE BATTERY. Two means of charging the battery are provided: 1. Via a 230V mains electricity supply, using the mains adaptor, as shown. 2. Via a 12V supply using the vehicle cigar lighter adapter with cable and plug provided. NOTE: Using a 12V vehicle supply, the battery will not charge to maximum, but only to approx. 50% of its capacity. NOTE: A 5 amp fuse is fitted into the cigarette lighter plug adaptor, accessed by unscrewing the end cap of the adaptor. Take care not to loose the spring when unscrewing this cap. CHARGING USING THE 230V MAINS ADAPTOR 1. Plug the cable into the socket in the charger, then plug the adaptor into the mains supply and switch on. The red CHARGING light on the jump-start will come on to indicate charging is in progress. 2. Continue to charge until the RED charging light goes out. It is important to note that this could take several days, dependant upon the state of charge of the battery. Pressing the TEST button, with the charger disconnected, will REVERSE 7

8 cause the needle on the voltmeter to indicate the state of charge of the battery. Once the charger is disconnected, it will be noted that the voltage will slowly settle back. This is quite normal and should not cause alarm. When the LED extinguishes, charging will automatically stop, indicating that the battery is at maximum capacity. IMPORTANT: DO NOT allow the needle to enter the RED zone as this could damage the battery. CHARGING USING THE 12V ADAPTOR 1. Plug the jack plug into the charging socket at the rear of the unit, then into the cigar lighter socket on the vehicle and start the engine. The red LED on the jump-start will indicate that charging is in progress. 2. Continue to charge until the Internal Battery Status gauge registers OK when the TEST button is pressed, WITH THE CHARGING CURRENT DISCONNECTED. i.e. disconnect the cigar lighter adapter from the socket on the vehicle before pressing the TEST switch. NOTE: We recommend that you use this system only when necessary, as prolonged use will reduce the life expectancy of the battery, due to the fact that this method can only charge the battery to approx. 50% of its capacity. NOTE: For maximum battery life, we strongly recommend that you maintain the battery in a fully charged state at all times. NOTE: If charging does not take place, check the green LED on the adapter. Ensure all connections are clean and free of grease etc. OPERATION WARNING: FAILURE TO FOLLOW THE INSTRUCTIONS BELOW AND THE SAFETY INSTRUCTIONS ON PAGES 3/4, MAY RESULT IN PERSONAL INJURY, DAMAGE TO THE VEHICLE, OR THE POSSIBILITY OF AN EXPLOSION Always carry out the following preliminary checks before connecting the jump-start to the car battery: Ensure the vehicle ignition and ALL ancillary equipment - lighting, radio etc, is switched off. Ensure the vehicle battery is rated at 12V and is not damaged in any way. 8

9 Ensure the battery terminals are clean and the clamps are firm and secure. Remove any vehicle battery filler plugs and check the electrolyte level. If necessary, top up with distilled water. Ensure the area is well ventilated. Take great care not to touch the red positive (+) clamp against the black negative (-) clamp. 1. Ensure the ON/OFF switch is in the OFF position. 2. Connect the red positive (+) clamp to the positive (+) battery terminal first. Take care the clamp does not contact any moving parts or fuel lines. 3. Connect the black negative (-) clamp to the negative (-) battery terminal or to a suitable earthing point on the vehicle chassis ensuring the connections are firm and secure. 4. Switch the Jump-start, then the vehicle ignition ON and leave in this condition FOR APPROX TWO MINUTES. (This will provide the vehicle battery with a short boost charge to allow for easier starting). 5. Switch the ignition to start, for NO MORE than 6 seconds. If the engine does not start, within this time, SWITCH OFF the ignition and wait for at least 3 minutes before trying again to prevent damage to the jumpstarter due to overheating before trying again. After this cooling off period, it is safe to resume trying to start the vehicle. 6. Once the vehicle has started, turn the jump-start ON/OFF switch OFF. 7. Once the engine is running, disconnect the earthed clamp FIRST i.e. that connected to the chassis or Negative terminal etc, and return it to its storage position, then disconnect the Positive clamp from the battery terminal, and restore to its storage position. 8. After use, always recharge the jump-start. If the battery is allowed to remain in a discharged state, its life may be shortened. 9. Regularly check the charge level of the battery by pressing the TEST pushbutton on the front panel. WARNING: IT IS POSSIBLE THAT SOME ELECTRONIC EQUIPMENT COULD BE DAMAGED BY JUMP STARTING. ALWAYS CHECK WITH THE CAR MANUFACTURER S HANDBOOK TO DETERMINE WHAT PRECAUTIONS IF ANY SHOULD BE TAKEN. 9

10 USING AS A 12VOLT POWER SUPPLY The unit has a cigar lighter type socket located on the side of the casing (see page 6), that allows connection via a standard DC connector to other DC electrical equipment. WARNING: Be aware that a fully charged 12V battery can have an output of approx.13.5v. Consult the appliance handbook to ensure it is safe to operate from a 12V battery. The table below indicates the approx. operating time from a fully charged battery. ESTIMATED OPERATING PERIOD PROVIDED Estimated Use Electrical Appliance 30 hours Mobile phones 21 hours Radios, fans 12 hours Cam-corder, VCR, Spotlight 7 hours Electrical tools, bilge pump USING THE AIR COMPRESSOR (MODEL 910 ONLY) WARNING: DO NOT RUN THE COMPRESSOR FOR MORE THAN 10 MINUTES. ALLOW A 10 MINUTE PERIOD TO ELAPSE BEFORE SWITCHING ON AGAIN. For inflating tyres, attach the air hose to the tyre by pushing the connector down firmly on the tyre adapter and locking in place by turning the connector locking lever through 90 degrees. Switch ON the compressor. The gauge will indicate the air pressure. CAUTION: THE AIR PRESSURE GAUGE ON THIS PRODUCT IS FOR GUIDANCE ONLY. IT IS IMPORTANT THAT YOU CHECK YOUR TYRE PRESSURE WITH A PRESSURE CERTIFIED GAUGE. Three adapters are also provided which allow the compressor to be used for inflating air beds, footballs etc. Select the appropriate adapter and push the threaded end firmly into the air hose connector, locking it in place by turning the connector locking lever through 90 degrees. 10

11 MAINTENANCE Always ensure the cables & clamps are in good condition and the clamps are clean and corrosion free. If damaged they should be replaced. Keep the unit clean by wiping with a dry cloth. DO NOT use solvents as a cleaning agent. Keep the unit at HIGH or FULL CHARGE status at all times. Always turn the jump-start OFF during storage and store in an upright position, away from direct sunlight, moisture or sources of extreme heat or cold. NEVER attempt any repair unless your are a qualified technician. Your Clarke jump-start has been designed to give long and trouble free service. If, however, having followed the instructions in this booklet carefully, you encounter problems, take the unit to your local Clarke dealer. CHANGING THE BATTERY 1. Unscrew and remove the self tapping screws securing the back cover. Lift off the cover to expose the battery and other components. 2. Lift out the battery from the battery compartment, and detach the heavy duty, and other cables, from the battery terminals. 3. Taking great care not to short across the battery terminals, connect the RED heavy duty cable, and other cable with red sheath, to the battery terminal painted RED, and the black cables to the other battery terminal. 4. Gently slide the new battery into position in its compartment, taking care not to damage the printed circuit board. 5. Replace the back cover and secure with the self tapping screws. CHANGING THE LIGHT BULB 1. Gently squeeze the sides of the lens bezel together, or very carefully use a screwdriver to disengage the clips at each side & pull the lens & bezel out. 2. Unscrew and remove the burned out bulb and screw in a replacement. 3. Snap the lens and bezel back into place and replace the back cover. Spare parts are available as follows Part Number 1 Positive Battery Connection Lead HT Lamp Bezel HT Lamp Lens HT Volt Charger assembly HT Negative Battery Lead HT Battery (12V/17AH HT

12

JUMPSTART MODEL NO: JS1000, JS1010 & JS1224 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: , & GC0514

JUMPSTART MODEL NO: JS1000, JS1010 & JS1224 OPERATING & MAINTENANCE INSTRUCTIONS PART NO: , & GC0514 JUMPSTART MODEL NO: JS1000, JS1010 & JS1224 PART NO: 6240040, 6240035 & 6240045 OPERATING & MAINTENANCE INSTRUCTIONS GC0514 INTRODUCTION Thank you for purchasing this CLARKE Jumpstart. Before attempting

More information

5 IN 1 JUMP START OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JS5IN1 PART NO: LS0810

5 IN 1 JUMP START OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JS5IN1 PART NO: LS0810 5 IN 1 JUMP START MODEL NO: JS5IN1 PART NO: 6240005 OPERATION & MAINTENANCE INSTRUCTIONS LS0810 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please

More information

JUMP STARTER OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JSM350 PART NO: ORIGINAL INSTRUCTIONS LS1117-ISS 1

JUMP STARTER OPERATION & MAINTENANCE INSTRUCTIONS MODEL NO: JSM350 PART NO: ORIGINAL INSTRUCTIONS LS1117-ISS 1 JUMP STARTER MODEL NO: JSM350 PART NO: 6239010 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS1117-ISS 1 INTRODUCTION Thank you for purchasing this CLARKE product. Please read this manual

More information

CORDLESS COMPRESSOR WITH SPOTLIGHT + JUMP START

CORDLESS COMPRESSOR WITH SPOTLIGHT + JUMP START CSS1 - Spotlight compressor (08-0540-2).book Page 1 Thursday, June 17, 2010 10:26 AM CORDLESS COMPRESSOR WITH SPOTLIGHT + JUMP START MODEL NO: CSS1 PART NO: 6240055 OPERATION & MAINTENANCE INSTRUCTIONS

More information

LEAD ACID BATTERY CHARGER

LEAD ACID BATTERY CHARGER LEAD ACID BATTERY CHARGER MODEL NO: LA4 & LA6 OPERATION & MAINTENANCE INSTRUCTIONS LS1214 INTRODUCTION Thank you for purchasing this CLARKE Battery Charger. Please read this manual thoroughly, before attempting

More information

28W WORK LAMP Model: CTL28 Part No:

28W WORK LAMP Model: CTL28 Part No: 28W WORK LAMP Model: CTL28 Part No: 4002905 INSTRUCTION MANUAL GC0609 INTRODUCTION Thank you for purchasing this CLARKE 28W Work Lamp. Before attempting to use the product, it is essential that you read

More information

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC185N & BC205N OPERATING INSTRUCTIONS

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC185N & BC205N OPERATING INSTRUCTIONS HEAVY DUTY BATTERY BOOSTERS / CHARGERS MODEL Nos. BC185N & BC205N OPERATING INSTRUCTIONS 0614 Thank you for purchasing this CLARKE Battery Charger. These units are suitable for charging and boosting 12

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS AUTOMATIC BATTERY CHARGER / MAINTAINER MODEL NO: CBO9-12 PART NO: 6267025 OPERATION & MAINTENANCE INSTRUCTIONS LS0315 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS AUTOMATIC BATTERY CHARGER / MAINTAINER MODEL NO: CBO9-6/12 PART NO: 6267020 OPERATION & MAINTENANCE INSTRUCTIONS LS0615 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS AUTOMATIC BATTERY CHARGER / MAINTAINER MODEL NO: CBO9-12 PART NO: 6267025 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0118 - ISS 3 INTRODUCTION Thank you for purchasing this CLARKE product.

More information

BATTERY STARTER/CHARGER MODEL NO: BC125, BC190

BATTERY STARTER/CHARGER MODEL NO: BC125, BC190 BATTERY STARTER/CHARGER MODEL NO: BC125, BC190 PART NO: 6210125, 6210200 OPERATION & MAINTENANCE INSTRUCTIONS LS0616 INTRODUCTION Thank you for purchasing this CLARKE Battery starter / charger Please read

More information

HIGH FREQUENCY AUTOMATIC BATTERY CHARGER

HIGH FREQUENCY AUTOMATIC BATTERY CHARGER HIGH FREQUENCY AUTOMATIC BATTERY CHARGER MODEL NO: HFBC12 PART NO: 6267000 OPERATION & MAINTENANCE INSTRUCTIONS LS0814 INTRODUCTION Thank you for purchasing this CLARKE High Frequency Automatic Battery

More information

PROFESSIONAL CORDLESS IMPACT SCREWDRIVER

PROFESSIONAL CORDLESS IMPACT SCREWDRIVER PROFESSIONAL CORDLESS IMPACT SCREWDRIVER Model CIS00 Part No 4500625 OPERATING & MAINTENANCE INSTRUCTIONS GC0309 INTRODUCTION Thank you for purchasing this CLARKE Impact Screwdriver. Before attempting

More information

BATTERY CHARGER-STARTER

BATTERY CHARGER-STARTER BATTERY CHARGER-STARTER MODEL NO: WBC240 & WBC400 PART NO: 6261505 & 6261515 OPERATION & MAINTENANCE INSTRUCTIONS GC0116 INTRODUCTION Thank you for purchasing this CLARKE Battery Charger/Starter. Please

More information

SWING ARM MAGNIFYING LAMP MODEL NO: SAM170

SWING ARM MAGNIFYING LAMP MODEL NO: SAM170 SWING ARM MAGNIFYING LAMP MODEL NO: SAM170 PART NO: 54605338 ASSEMBLY & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0217 INTRODUCTION Thank you for purchasing your CLARKE swing arm magnifying lamp,

More information

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600 BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 600 PART NO: 6261200 OPERATION & MAINTENANCE INSTRUCTIONS LS0815 INTRODUCTION Thank you for purchasing this CLARKE Battery booster / charger which is suitable

More information

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900

BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900 BATTERY BOOSTER/CHARGER MODEL NO: DIGICAR 900 PART NO: 6261205 OPERATION & MAINTENANCE INSTRUCTIONS LS0715 INTRODUCTION Thank you for purchasing this CLARKE Battery booster / charger which is suitable

More information

BATTERY/BOOSTER CHARGER. Model No: BC100N Part No: OPERATING & MAINTENANCE INSTRUCTIONS

BATTERY/BOOSTER CHARGER. Model No: BC100N Part No: OPERATING & MAINTENANCE INSTRUCTIONS BATTERY/BOOSTER CHARGER Model No: BC100N Part No: 6210101 OPERATING & MAINTENANCE INSTRUCTIONS 0906 Specifications Max Charge... 15Amps Duty Cycle... 100% 10A Arith. Max Boost... 100Amps Boost/Charge...

More information

OPERATING & MAINTENANCE INSTRUCTIONS

OPERATING & MAINTENANCE INSTRUCTIONS BATTERY/BOOSTER CHARGER Model No: BC100C Part No: 6210106 OPERATING & MAINTENANCE INSTRUCTIONS 0915 Specifications Max Charge... 15Amps Duty Cycle... 100% 10A Arith. Max Boost... 100Amps Boost/Charge...

More information

RECHARGEABLE SPOTLIGHT

RECHARGEABLE SPOTLIGHT RECHARGEABLE SPOTLIGHT MODEL: RWL10 Part No: 4002822 INSTRUCTION MANUAL LS0609 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you read

More information

1200W INVERTER GENERATOR

1200W INVERTER GENERATOR 1200W INVERTER GENERATOR MODEL NO: IG1200 PART NO: 8877070 OPERATION & MAINTENANCE INSTRUCTIONS LS0117 INTRODUCTION Thank you for purchasing this CLARKE 1200W Inverter Generator. Before attempting to use

More information

RECHARGEABLE SPOTLIGHT

RECHARGEABLE SPOTLIGHT RECHARGEABLE SPOTLIGHT MODEL: RWL10 Part No: 4002822 INSTRUCTION MANUAL LS0609 INTRODUCTION Thank you for purchasing this CLARKE product Before attempting to use the product, it is essential that you read

More information

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC260N & BC335 OPERATING & MAINTENANCE INSTRUCTIONS

HEAVY DUTY BATTERY BOOSTERS / CHARGERS. MODEL Nos. BC260N & BC335 OPERATING & MAINTENANCE INSTRUCTIONS HEAVY DUTY BATTERY BOOSTERS / CHARGERS MODEL Nos. BC260N & BC335 OPERATING & MAINTENANCE INSTRUCTIONS 0707 Thank you for purchasing this CLARKE Battery Charger. These units are suitable for charging and

More information

ATD-5921 RECHARGEABLE 12 VOLT 18 AMP/HOUR JUMP START OWNERS MANUAL

ATD-5921 RECHARGEABLE 12 VOLT 18 AMP/HOUR JUMP START OWNERS MANUAL ATD-5921 RECHARGEABLE 12 VOLT 18 AMP/HOUR JUMP START OWNERS MANUAL 900 PEAK AMPS/400 CRANKING AMPS OF STARTING POWER. STARTS CARS, TRUCKS, RV s AND BOATS WITHOUT THE NEED OF ANOTHER VEHICLE OR AC POWER

More information

Bore Hole Pump Model Nos: CBB75 CBB100 Part Nos:

Bore Hole Pump Model Nos: CBB75 CBB100 Part Nos: Bore Hole Pump Model Nos: CBB75 CBB100 Part Nos: 7150710 7150715 USER INSTRUCTIONS ORIGINAL INSTRUCTIONS 1117 Thank you for purchasing this CLARKE Bore Hole Pump, which is designed for use in a domestic

More information

ATD-5925 RECHARGEABLE 12 VOLT 18 AMP/HOUR JUMP START WITH BUILT-IN 260 PSI AIR COMPRESSOR OWNERS MANUAL

ATD-5925 RECHARGEABLE 12 VOLT 18 AMP/HOUR JUMP START WITH BUILT-IN 260 PSI AIR COMPRESSOR OWNERS MANUAL ATD-5925 RECHARGEABLE 12 VOLT 18 AMP/HOUR JUMP START WITH BUILT-IN 260 PSI AIR COMPRESSOR OWNERS MANUAL 1000 PEAK AMPS/400 CRANKING AMPS OF STARTING POWER. STARTS CARS, TRUCKS, RV s AND BOATS WITHOUT THE

More information

CORDLESS IMPACT WRENCH

CORDLESS IMPACT WRENCH CORDLESS IMPACT WRENCH MODEL NO: CIR450C PART NO: 4500633 OPERATING & MAINTENANCE INSTRUCTIONS GC0415 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting to use this product,

More information

ORIGINAL INSTRUCTIONS

ORIGINAL INSTRUCTIONS OPERATION & MAINTENANCE INSTRUCTIONS CBB200 Shown here BUFFER/POLISHER MODEL NO: CBB150, CBB200 PART NO: 6500485, 6500490 ORIGINAL INSTRUCTIONS LS0818 - ISS 1 INTRODUCTION Thank you for purchasing this

More information

HEAVY DUTY BATTERY BOOSTERS / CHARGER MODEL No. BC420N

HEAVY DUTY BATTERY BOOSTERS / CHARGER MODEL No. BC420N HEAVY DUTY BATTERY BOOSTERS / CHARGER MODEL No. BC420N OPERATING & MAINTENANCE INSTRUCTIONS 1206 SPECIFICATIONS Supply Voltage 230 Max Charge (Amps) 60 (cont) Max Boost (Amps) 400 Boost/Charge (Volts)

More information

HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: &

HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: & HALOGEN FLOODLIGHTS Models CHL1260C & 1260T Part Nos: 5460600 & 5460595 OPERATING & MAINTENANCE INSTRUCTIONS GC0610 INTRODUCTION Thank you for purchasing this CLARKE Halogen Floodlight. Before attempting

More information

CFT24 &CFT230 PART NOS:

CFT24 &CFT230 PART NOS: FUEL TRANSFER PUMP Model Nos. CFT12, CFT24 &CFT230 PART NOS: 7160010, 7160020 & 7160030 INSTALLATION & OPERATING INSTRUCTIONS ORIGINAL INSTRUCTIONS GC05/18 REV 5 INTRODUCTION Thank you for purchasing this

More information

230V DIESEL FUEL TRANSFER PUMP MODEL NO: DFT230

230V DIESEL FUEL TRANSFER PUMP MODEL NO: DFT230 230V DIESEL FUEL TRANSFER PUMP MODEL NO: DFT230 PART NO: 7160050 OPERATION & MAINTENANCE INSTRUCTIONS GC0816 INTRODUCTION Thank you for purchasing this CLARKE Pump. The DFTP230 pump is a self-priming rotary

More information

GENERATOR MODEL NO: FG2500 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0114

GENERATOR MODEL NO: FG2500 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0114 GENERATOR MODEL NO: FG2500 PART NO: 8857727 OPERATION & MAINTENANCE INSTRUCTIONS LS0114 INTRODUCTION Thank you for purchasing this CLARKE Generator. Before attempting to use this product, please read this

More information

BATTERY BOOSTERS / CHARGERS BC120N BC130N BC210N BC320E BC410E BC520N

BATTERY BOOSTERS / CHARGERS BC120N BC130N BC210N BC320E BC410E BC520N BATTERY BOOSTERS / CHARGERS BC120N BC130N BC210N BC320E BC410E BC520N OPERATING INSTRUCTIONS 1106 SPECIFICATIONS MODEL 120N 130N 210N 320E 410E 520N MAX CHARGE (AMPS) 15 15 25 35 35 50 MAX BOOST (AMPS)

More information

PROFESSIONAL CORDLESS IMPACT WRENCH

PROFESSIONAL CORDLESS IMPACT WRENCH PROFESSIONAL CORDLESS IMPACT WRENCH Model CIR450 Part No 4500630 OPERATING & MAINTENANCE INSTRUCTIONS GC0309 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting to operate

More information

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT 24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT Model No: CIR220 Part No 4500635 OPERATING & MAINTENANCE INSTRUCTIONS GC02/13 INTRODUCTION Thank you for purchasing this CLARKE Impact Wrench. Before attempting

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 400W SUBMERSIBLE PUMP WITH FOLDING BASE AND FLOAT SWITCH MODEL NO: PSV6A PART NO: 7230695 OPERATION & MAINTENANCE INSTRUCTIONS LS0315 INTRODUCTION Thank you for purchasing this CLARKE 400W Submersible

More information

MODEL No. BC 700. Par t No OPERATING & MAINTENANCE INSTRUCTIONS

MODEL No. BC 700. Par t No OPERATING & MAINTENANCE INSTRUCTIONS BATTERY BOOSTER/CHARGER MODEL No. BC 700 Par t No.6260025 OPERATING & MAINTENANCE INSTRUCTIONS Congratulations on the purchase of your new CLARKE, START N CHARGE 700, BATTERY BOOSTER/CHARGER. This 3 Phase

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 750W SUBMERSIBLE PUMP WITH BUILT-IN FLOAT SWITCH MODEL NO: PSV5A PART NO: 7236046 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 iss 3 INTRODUCTION Thank you for purchasing this CLARKE

More information

250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105

250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105 250W PUDDLE PUMP WITH AUTO SENSOR MODEL NO: PSP105 PART NO: 7230693 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0917 -- iss 3 INTRODUCTION Thank you for purchasing this CLARKE 250W Puddle

More information

5.5KVA GENERATOR MODEL NO: PG6500DVES OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0616

5.5KVA GENERATOR MODEL NO: PG6500DVES OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0616 5.5KVA GENERATOR MODEL NO: PG6500DVES PART NO: 8857810 OPERATION & MAINTENANCE INSTRUCTIONS LS0616 INTRODUCTION Thank you for purchasing this CLARKE 5.5KVA Generator. Before attempting to use this product,

More information

TRICKLE CHARGER MODEL NO: ATC12VB OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS0618 ISS 2

TRICKLE CHARGER MODEL NO: ATC12VB OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS LS0618 ISS 2 TRICKLE CHARGER MODEL NO: ATC12VB PART NO: 6266012 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0618 ISS 2 INTRODUCTION Thank you for selecting this Clarke Trickle Charger. Read this manual

More information

ATD-5928 RECHARGEABLE 12 VOLT 22 AMP/HOUR JUMP START OWNERS MANUAL

ATD-5928 RECHARGEABLE 12 VOLT 22 AMP/HOUR JUMP START OWNERS MANUAL ATD-5928 RECHARGEABLE 12 VOLT 22 AMP/HOUR JUMP START OWNERS MANUAL 1700 PEAK AMPS/700 CRANKING AMPS OF STARTING POWER. STARTS CARS, TRUCKS, RV s AND BOATS WITHOUT THE NEED OF ANOTHER VEHICLE OR AC POWER

More information

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT

24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT 24V DC - 1/2 SQUARE DRIVE IMPACT WRENCH KIT MODEL No. CIR24 Part No. 4500620 OPERATING & MAINTENANCE INSTRUCTIONS 1006 Thank you for purchasing this CLARKE 24 volt DC, 1/2 Square Drive Impact Wrench. Please

More information

Pro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.

Pro Booster 802Li. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

SUBMERSIBLE PUMP. Model No: HIPPO 2 OPERATING & MAINTENANCE INSTRUCTIONS

SUBMERSIBLE PUMP. Model No: HIPPO 2 OPERATING & MAINTENANCE INSTRUCTIONS SUBMERSIBLE PUMP Model No: HIPPO 2 OPERATING & MAINTENANCE INSTRUCTIONS 0107 1 HIPPO 2 240 Volt and 110 Volt models Thank you for purchasing this Clarke Hippo 2 Pump. Before attempting to operate this

More information

HOT AIR GUN MODEL No. CHG 1500B Part No

HOT AIR GUN MODEL No. CHG 1500B Part No HOT AIR GUN MODEL No. CHG 1500B Part No. 3400751 OPERATING & MAINTENANCE INSTRUCTIONS 0201 Thank you for selecting this CLARKE Hot Air Gun, which is designed for DIY and professional use alike. Before

More information

3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV

3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV 3KVA DUAL VOLTAGE GENERATOR MODEL NO: PG3800DV PART NO: 8857815 OPERATION & MAINTENANCE INSTRUCTIONS LS1016 INTRODUCTION Thank you for purchasing this CLARKE 3KVA Dual Voltage Generator. Before attempting

More information

MODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS. Distributed by CLARKE International Ltd.

MODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS. Distributed by CLARKE International Ltd. MODEL Nos: CVAC20SS CVAC25SS CVAC30SSR OPERATING & MAINTENANCE INSTRUCTIONS Distributed by CLARKE International Ltd. 1006 Thank you for selecting this VAC KING Stainless Steel Vacuum Cleaner, which will

More information

12V OIL & DIESEL PUMP MODEL NO: CFTP12

12V OIL & DIESEL PUMP MODEL NO: CFTP12 12V OIL & DIESEL PUMP MODEL NO: CFTP12 PART NO: 7160100 OPERATION & MAINTENANCE INSTRUCTIONS GC0814 INTRODUCTION Thank you for purchasing this CLARKE Pump. The CFTP12 pump is designed only for use with

More information

OWNER'S MANUAL POWER BOOSTER. Rechargeable 12 Volt DC power supply. Item # Enclose copy of original sales receipt

OWNER'S MANUAL POWER BOOSTER. Rechargeable 12 Volt DC power supply. Item # Enclose copy of original sales receipt 120 DAY LIMITED WARRANTY REGISTRATION FORM All NORTHERN TOOL+EQUIPMENT products are warranted to the original purchaser only for 120 days from the date of purchase, to be free of defects in materials and

More information

4 in 1 POWER STATION Model: 7226

4 in 1 POWER STATION Model: 7226 Please carefully read and save these instructions before attempting to assemble, maintain, install, or operate this product. Observe all safety information to protect yourself and others. Failure to observe

More information

Car Battery Charger Instructions for Use

Car Battery Charger Instructions for Use BATTERY CHARGER 12Volt 4Amp FOR INDOOR USE ONLY Power Details: Input: 230-240Vac; 50Hz; 52W Output: 12V DC; 2.8A Maximum Charge Rate: 4A RMS Read these instructions before operating this car battery charger

More information

12 amp RMS Battery Charger

12 amp RMS Battery Charger 12 amp RMS Battery Charger 83-5000-12 If faults cannot be remedied, contact the Helpline on 020 8391 6767 helpline@hilka.co.uk Manufactured under license by Hilka Pro Imports GUARANTEE This product is

More information

SUBMERSIBLE DIRTY WATER PUMP

SUBMERSIBLE DIRTY WATER PUMP FOR USE WITH A 110V SUPPLY ONLY SUBMERSIBLE DIRTY WATER PUMP MODEL NO: DWP210A PART NO: 7230102 OPERATION & MAINTENANCE INSTRUCTIONS LS0115 INTRODUCTION Thank you for purchasing this CLARKE Submersible

More information

AIR FILTER MODEL NO: AF1000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO:

AIR FILTER MODEL NO: AF1000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: AIR FILTER MODEL NO: AF1000 PART NO: 6471160 OPERATION & MAINTENANCE INSTRUCTIONS 1208 INTRODUCTION Thank you for purchasing this Clarke Air Filter. Before you try to use this product, read this manual

More information

WARNING: Read these instructions before using the machine GENERATOR MODEL NO: IG3500F PART NO: OPERATION & MAINTENANCE INSTRUCTIONS

WARNING: Read these instructions before using the machine GENERATOR MODEL NO: IG3500F PART NO: OPERATION & MAINTENANCE INSTRUCTIONS WARNING: Read these instructions before using the machine GENERATOR MODEL NO: IG3500F PART NO: 8877100 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0217 INTRODUCTION Thank you for purchasing

More information

QuickBoost Instruction Manual

QuickBoost Instruction Manual Sheet 1 of 12 QuickBoost Instruction Manual MobilePower, LLC. Bluffton, SC 29910 www. Mobilepower-us.com Office: (800) 708-8550 support@mobilepower-us.com customerservice@mobilepower-us.com Sheet 2 of

More information

720W PORTABLE GENERATOR

720W PORTABLE GENERATOR 720W PORTABLE GENERATOR MODEL NO: G720 PART NO: 8857800 OPERATION & MAINTENANCE INSTRUCTIONS LS0214 INTRODUCTION Thank you for purchasing this CLARKE 720W Portable Generator Before attempting to use this

More information

Rescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference

Rescue Pac. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference Please dispose of Packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

SUBMERSIBLE WATER PUMP

SUBMERSIBLE WATER PUMP SUBMERSIBLE WATER PUMP MODEL NO: CSV1A, CSV2A PART NO: 7230582, 7230602 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS 05/14 iss 4 INTRODUCTION Thank you for purchasing this CLARKE Submersible

More information

INSTANT JUMPSTARTING POWER USER MANUAL. Copyright PowerStation, LLC All rights reserved MODEL: PS1100

INSTANT JUMPSTARTING POWER USER MANUAL. Copyright PowerStation, LLC All rights reserved MODEL: PS1100 INSTANT JUMPSTARTING POWER USER MANUAL Copyright PowerStation, LLC All rights reserved MODEL: PS1100 CONTENTS Warning Info 1 2 Introduction 3 Features 3 Getting to know your PS1100 4 5 Operation 6 Charging

More information

18V CORDLESS DRILL MODEL NO: CON18LiC

18V CORDLESS DRILL MODEL NO: CON18LiC 18V CORDLESS DRILL MODEL NO: CON18LiC PART NO: 6479531 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0817 - ISS 2 INTRODUCTION Thank you for purchasing this CLARKE Cordless Drill. Before

More information

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414

CORDLESS TACKER MODEL NO: CCT48 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0414 CORDLESS TACKER MODEL NO: CCT48 PART NO: 6485070 OPERATION & MAINTENANCE INSTRUCTIONS LS0414 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product, please read

More information

USER MANUAL. Copyright 2006, PowerStation, LLC All rights reserved MODEL: PS5000M

USER MANUAL. Copyright 2006, PowerStation, LLC All rights reserved MODEL: PS5000M USER MANUAL Copyright 2006, PowerStation, LLC All rights reserved MODEL: PS5000M CONTENTS Warning Information 1 3 Introduction 4 Features 4 Getting to know your PS5000M 5-6 Operation 7 Charging before

More information

POND PUMP Model Nos:SPP3 & SPP6 0200

POND PUMP Model Nos:SPP3 & SPP6 0200 OPERATING & MAINTENANCE INSTRUCTIONS POND PUMP Model Nos:SPP3 & SPP6 0200 Thank you for purchasing this CLARKE Water Pump, which is particularly suitable for the filtration of small to medium size swimming

More information

SUBMERSIBLE PUMP HSE RANGE

SUBMERSIBLE PUMP HSE RANGE SUBMERSIBLE PUMP HSE RANGE OPERATION & MAINTENANCE INSTRUCTIONS 0707 SPECIFICATIONS HSE300* HSE360* Model No. HSE130* HSE200A HSE300A HSE360A HSEC400* HSE301A HSE361A Outlet Dia. (mm/inches) 32/1-1/4 38/1-1/2

More information

Rechargeable Air Compressor

Rechargeable Air Compressor Rechargeable Air Compressor RAC-HP124 Environmental protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority

More information

1100W PORTABLE GENERATOR

1100W PORTABLE GENERATOR 1100W PORTABLE GENERATOR MODEL NO: G1200 PART NO: 8010110 OPERATION & MAINTENANCE INSTRUCTIONS LS0312 INTRODUCTION Thank you for purchasing this CLARKE 1100W Portable Generator. Before attempting to use

More information

12VDC TO 230VAC INVERTERS

12VDC TO 230VAC INVERTERS 12VDC TO 230VAC INVERTERS 12VDC TO 230VAC INVERTERS MODEL Nos: CI-200 CI-400 CI-600 CI-800 CI-1000 CI-1500 OPERATION & MAINTENANCE INSTRUCTIONS 0706 Thank you for purchasing this CLARKE Power Inverter.

More information

BENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS

BENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS BENCH GRINDER MODEL CBG6RZ OPERATING & MAINTENANCE INSTRUCTIONS 0100 9 Thank you for purchasing this CLARKE BENCH GRINDER. Before attempting to operate this machine, please read this instruction manual

More information

BENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101

BENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101 BENCH GRINDER MODEL CBG6RP OPERATING & MAINTENANCE INSTRUCTIONS 0101 Thank you for purchasing this CLARKE Bench Grinder Before attempting to operate this machine, please read this instruction manual thoroughly

More information

MP V 8A Electronic Smart Charger. Instruction and Information Manual

MP V 8A Electronic Smart Charger. Instruction and Information Manual MP7428 12V 8A Electronic Smart Charger Instruction and Information Manual In order to ensure correct and safe usage of your battery charger, you should read these instructions carefully. Please retain

More information

VARIABLE SPEED JIG SAW

VARIABLE SPEED JIG SAW VARIABLE SPEED JIG SAW CORDLESS Part No. IMPACT 6460200 DRILL CORDLESS IMPACT DRILL MODEL No. CON24 Part No. 6485065 OPERATING & MAINTENANCE INSTRUCTIONS 1 LS0610 Thank you for purchasing this CLARKE Cordless

More information

15 N ONE Multi-Purpose Vehicle Jumpstart System

15 N ONE Multi-Purpose Vehicle Jumpstart System 15 N ONE Multi-Purpose Vehicle Jumpstart System Double Injection Casing with Rubberized Protective Bumper Guards 400 Watt Continuous 800 Watt Peak Inverter With two 110 V AC Outlets Two Detachable LED

More information

Vehicle battery BATTERY WARNING SYMBOLS BATTERY CARE

Vehicle battery BATTERY WARNING SYMBOLS BATTERY CARE Vehicle battery BATTERY WARNING SYMBOLS On the battery label, the warning signs are as follows: BATTERY CARE No smoking, no naked flames, no sparks. The battery may emit explosive gas. Keep away from children

More information

MB V 3-IN-1 JUMP STARTER WITH SPIRAL WOUND BATTERY

MB V 3-IN-1 JUMP STARTER WITH SPIRAL WOUND BATTERY MB3730 12V 3-IN-1 JUMP STARTER WITH SPIRAL WOUND BATTERY 1 IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for this PowerStation.

More information

SUBMERSIBLE WATER PUMPS

SUBMERSIBLE WATER PUMPS SUBMERSIBLE WATER PUMPS Model Nos. CS85S - CS85SA CS120S - CS120SA CS185S - CS185SA CS240S - CS240SA CS305S - CS305SA OPERATING & MAINTENANCE INSTRUCTIONS 1000 CONTENTS Warranty conditions... 3 Safety

More information

SUBMERSIBLE PUMPS HSE RANGE OPERATING & MAINTENANCE INSTRUCTIONS GC0514

SUBMERSIBLE PUMPS HSE RANGE OPERATING & MAINTENANCE INSTRUCTIONS GC0514 SUBMERSIBLE PUMPS HSE RANGE OPERATING & MAINTENANCE INSTRUCTIONS GC0514 INTRODUCTION Thank you for purchasing this CLARKE submersible pump. Before attempting to use the pump, please read this manual thoroughly

More information

GENERATOR MODEL NO: FG3005 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0413

GENERATOR MODEL NO: FG3005 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0413 GENERATOR MODEL NO: FG3005 PART NO: 8857707 OPERATION & MAINTENANCE INSTRUCTIONS LS0413 INTRODUCTION Thank you for purchasing this CLARKE Generator. Before attempting to use this product, please read this

More information

OWNER S MANUAL PORTABLE POWER COMPACT & ROBUST

OWNER S MANUAL PORTABLE POWER COMPACT & ROBUST 52731 18 AMP-HOUR 12 VOLT OVERHEAT PROTECTION JUMP START OWNER S MANUAL PORTABLE POWER COMPACT & ROBUST 18 Amp-Hour, 12 Volt Wall charger 6-gauge booster cable Built in ultra-bright LED work light Safety

More information

OPERATING & MAINTENANCE INSTRUCTIONS

OPERATING & MAINTENANCE INSTRUCTIONS 8 WETSTONE BENCH GRINDER OPERATING & MAINTENANCE INSTRUCTIONS 0805 Thank you for purchasing this Clarke Bench Grinder. Before attempting to operate this bench grinder please read this instruction manual

More information

18V CORDLESS COMBI DRILL MODEL NO: CON18NI

18V CORDLESS COMBI DRILL MODEL NO: CON18NI CON18NI.fm Page 1 Tuesday, August 21, 2012 11:53 AM 18V CORDLESS COMBI DRILL MODEL NO: CON18NI PART NO: 6485067 OPERATION & MAINTENANCE INSTRUCTIONS LS0812 CON18NI.fm Page 2 Tuesday, August 21, 2012 11:53

More information

HOT WASHER MODEL NO: KING 125 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1009

HOT WASHER MODEL NO: KING 125 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1009 HOT WASHER MODEL NO: KING 125 PART NO: 7320170 OPERATION & MAINTENANCE INSTRUCTIONS LS1009 INTRODUCTION Thank you for purchasing this Hot Washer. This machine is a portable, high pressure power washer,

More information

Compact Jumpstart with Compressor Model No. JSM-0580

Compact Jumpstart with Compressor Model No. JSM-0580 Compact Jumpstart with Compressor Model No. JSM-0580 OWNER'S MANUAL Customer Service Tel: 1-800-268-3319 Superex Canada Limited, Toronto M2H 3B8 Made in China IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE

More information

KING 130 HOT WASHER Part No Product Serial No:...

KING 130 HOT WASHER Part No Product Serial No:... KING 130 HOT WASHER Part No. 7320510 OPERATING & MAINTENANCE INSTRUCTIONS Product Serial No:... 0601 SPECIFICATIONS Motor...230V 50hz Power Rating...2.6kW Fuse Rating...13Amps Noise Level...73dBA Max.

More information

Daylight Rechargeable Portable Light

Daylight Rechargeable Portable Light Daylight Rechargeable Portable Light DH367 Please retain these instructions for future reference. These instructions are also available in other formats. Special warning Please note: Do not look directly

More information

OWNERS MANUAL Models: XP400, XP500, XP750C INSTANT POWER Jump Starter and DC Power Source

OWNERS MANUAL Models: XP400, XP500, XP750C INSTANT POWER Jump Starter and DC Power Source OWNERS MANUAL Models: XP400, XP500, XP750C INSTANT POWER Jump Starter and DC Power Source XP400 XP500 XP750C PLEASE SAVE THIS OWNER S MANUAL AND READ BEFORE EACH USE. This manual will explain how to use

More information

roadstart emergency power packs

roadstart emergency power packs instructions for roadstart emergency power packs model nos: RS131.V4, RS132.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 12V LED BATTERY/ALTERNATOR TESTER MODEL NO: CBAT1 PART NO: 6260105 OPERATION & MAINTENANCE INSTRUCTIONS LS1113 INTRODUCTION Thank you for purchasing this CLARKE product. Before attempting to use this product,

More information

Power Beam 20MCP Searchlight with 12 LED Area Light and Vehicle Jump Starter. Instruction Manual

Power Beam 20MCP Searchlight with 12 LED Area Light and Vehicle Jump Starter. Instruction Manual Power Beam 20MCP Searchlight with 12 LED Area Light and Vehicle Jump Starter Instruction Manual MobilePower, LLC. Bluffton, SC 29910 www.mobilepower-us.com Customer Support: (800) 708-8550 customerservice@mobilepower-us.com

More information

GENERATOR MODEL NO: FG3000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0609

GENERATOR MODEL NO: FG3000 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0609 GENERATOR MODEL NO: FG3000 PART NO: 8857700 OPERATION & MAINTENANCE INSTRUCTIONS LS0609 INTRODUCTION Thank you for purchasing this CLARKE Generator. Before attempting to use this product, please read this

More information

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , LS1010

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , LS1010 ELECTRIC HOIST MODEL NO: CH2500B, CH4000B PART NO: 7630386, 7630391 OPERATION & MAINTENANCE INSTRUCTIONS LS1010 INTRODUCTION Thank you for purchasing this CLARKE Electric Hoist. Before attempting to use

More information

100 Watt Power Inverter + USB INSTRUCTION MANUAL HT8710-AUOXY

100 Watt Power Inverter + USB INSTRUCTION MANUAL HT8710-AUOXY 100 Watt Power Inverter + USB INSTRUCTION MANUAL HT8710-AUOXY CONTENTS Warranty 2 Introduction 3 Environmental protection 3 Specifications 3 General safety warnings and instructions 4 Know your product

More information

Power Beam 20MCP Searchlight with 12 LED Area Light and Vehicle Jump Starter. Instruction Manual

Power Beam 20MCP Searchlight with 12 LED Area Light and Vehicle Jump Starter. Instruction Manual Power Beam 20MCP Searchlight with 12 LED Area Light and Vehicle Jump Starter Instruction Manual MobilePower, LLC. Bluffton, SC 29910 www.mobilepower-us.com Customer Support: (800) 708-8550 customerservice@mobilepower-us.com

More information

900 PEAK AMP PORTABLE JUMP STARTER

900 PEAK AMP PORTABLE JUMP STARTER 900 PEAK AMP PORTABLE JUMP STARTER Item Number W1665 OWNER S MANUAL WARNING It is the owner and/or operators responsibility to study all WARNINGS, operating, and maintenance instructions contained on the

More information

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: ,

ELECTRIC HOIST MODEL NO: CH2500B, CH4000B OPERATION & MAINTENANCE INSTRUCTIONS PART NO: , ELECTRIC HOIST MODEL NO: CH2500B, CH4000B PART NO: 7630386, 7630391 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS LS0517 - Iss 5 INTRODUCTION Thank you for selecting this Clarke Electric Hoist.

More information

OPERATION & MAINTENANCE INSTRUCTIONS

OPERATION & MAINTENANCE INSTRUCTIONS 10 TONNE HEAVY DUTY LONG CHASSIS TROLLEY JACK MODEL NO: CTJ10GLS PART NO: 7623095 OPERATION & MAINTENANCE INSTRUCTIONS LS0915 INTRODUCTION Thank you for purchasing this CLARKE 10 Tonne Heavy Duty Long

More information

300 Amp Battery Jumper

300 Amp Battery Jumper Item No. : 7004 300 Amp Battery Jumper User s Manual CHARGE UNIT FOR 48 HOURS BEFORE FIRST USE. RECHARGE EVERY 3 MONTHS AND AFTER EACH USE. We are constantly improving our products so specifications are

More information

2 TONNE GARAGE JACK Model No: CTJ2QLP PART NO:

2 TONNE GARAGE JACK Model No: CTJ2QLP PART NO: TONNE GARAGE JACK Model No: CTJQLP PART NO: 7680 OPERATING & MAINTENANCE INSTRUCTIONS GC03 INTRODUCTION Thank you for purchasing this CLARKE Garage Jack. Before attempting to use this product, please read

More information