2013 NATEF Task Area A-4 Suspension, Steering, Alignment7-2013
|
|
- Edith Wilcox
- 5 years ago
- Views:
Transcription
1 2013 NATEF Task Area A-4 Suspension, Steering, Alignment A. Steering System Diagnosis & Repair B. Suspension System Diagnosis & Repair C. Wheel Alignment Diagnosis & Adjustment D. Wheel & Tire Diagnosis & Repair Typical Rubric for NATEF Competencies 1 = Demonstrated Exposure and has observed the competency 2 = Applies the competency but only mastered a few essential attributes 3 = Capable of the competency but needs further practice 4 = Performs the competency satisfactorily [Proficient] 5 = Mastered the competency [Exemplary]
2 A4.A.1 P-1 A. General Suspension and Steering System Diagnosis Research applicable vehicle and service information, vehicle service history, service precautions, and technical service bulletins.
3 A4.A.2 P-1 A. General Suspension and Steering System Diagnosis Identify and interpret suspension and steering system concerns; determine necessary action.
4 Oldie A. General Suspension and Steering System Diagnosis Complete work order to include customer information, vehicle identifying information, verify customer concern, related service history, cause, & correction.
5 Oldie A. General Suspension and Steering System Diagnosis Locate and interpret vehicle and major component identification numbers (VIN, vehicle certification labels, & calibration decals).
6 A4.B.1 B. Steering Systems Diagnosis and Repair Disable and enable supplemental restraint system (SRS). P-1
7 A4.B.2 P-1 B. Steering Systems Diagnosis and Repair Remove and replace steering wheel; center/time supplemental restraint system (SRS) coil (clock spring).
8 A4.B.3 P-2 B. Steering Systems Diagnosis and Repair Diagnose steering column noises, looseness, and binding concerns (including tilt mechanisms); determine necessary action.
9 A4.B.4 P-2 B. Steering Systems Diagnosis and Repair Diagnose power steering gear (non-rack and pinion) binding, uneven turning effort, looseness, hard steering, and noise concerns; determine necessary action.
10 A4.B.5 P-2 B. Steering Systems Diagnosis and Repair Diagnose power steering gear (rack and pinion) binding, uneven turning effort, looseness, hard steering, and noise concerns; determine necessary action.
11 A4.B.6 P-2 B. Steering Systems Diagnosis and Repair Inspect steering shaft universal-joint(s), flexible coupling(s), collapsible column, lock cylinder mechanism, and steering wheel; perform necessary action.
12 Oldie B. Steering Systems Diagnosis and Repair Adjust manual or power non-rack & pinion worm bearing preload & sector lash.
13 A4.B.7 P-2 B. Steering Systems Diagnosis and Repair Remove and replace rack and pinion steering gear; inspect mounting bushings and brackets.
14 A4.B.8 P-2 B. Steering Systems Diagnosis and Repair Inspect rack and pinion steering gear inner tie rod ends (sockets) and bellows boots; replace as needed.
15 A4.B.9 B. Steering Systems Diagnosis and Repair Determine proper power steering fluid type; inspect fluid level and condition. P-1
16 A4.B.10 B. Steering Systems Diagnosis and Repair Flush, fill, and bleed power steering system. P-2
17 A4.B.11 B. Steering Systems Diagnosis and Repair Inspect for power steering fluid leakage; determine necessary action. P-1
18 A4.B.12 B. Steering Systems Diagnosis and Repair Remove, inspect, replace, and adjust power steering pump drive belt. P-1
19 A4.B.13 B. Steering Systems Diagnosis and Repair Remove and reinstall power steering pump. P-2
20 A4.B.14 P-1 B. Steering Systems Diagnosis and Repair Remove and reinstall press fit power steering pump pulley; check pulley and belt alignment.
21 A4.B.15 B. Steering Systems Diagnosis and Repair Inspect and replace power steering hoses and fittings. P-2
22 Oldie B. Steering Systems Diagnosis and Repair Replace power steering pump filter(s).
23 A4.B.16 P-1 B. Steering Systems Diagnosis and Repair Inspect and replace pitman arm, relay (center link/intermediate) rod, idler arm and mountings, and steering linkage damper.
24 A4.B.17 B. Steering Systems Diagnosis and Repair Inspect, replace, and adjust tie rod ends (sockets), tie rod sleeves, and clamps. P-2
25 A4.B.18 P-1 B. Steering Systems Diagnosis and Repair Test and diagnose components of electronically-controlled steering systems using a scan tool; determine necessary action.
26 A4.B.19 P-3 B. Steering Systems Diagnosis and Repair Identify hybrid vehicle power steering system electrical circuits and safety precautions.
27 A4.B.19 B. Steering Systems Diagnosis and Repair Inspect electric power assist steering. P-2
28 A4.C.1 P-1 C. Suspension Systems Diagnosis and Repair Diagnose short and long arm suspension system noises, body sway, and uneven ride height concerns; determine necessary action.
29 A4.C.2 P-1 C. Suspension Systems Diagnosis and Repair Diagnose strut suspension system noises, body sway, and uneven ride height concerns; determine necessary action.
30 A4.C.3 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install upper and lower control arms, bushings, shafts, and rebound bumpers.
31 A4.C.4 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install strut rods and bushings.
32 A4.C.5 P-2 C. Suspension Systems Diagnosis and Repair Inspect, remove and install upper and/or lower ball joints (with or without wear indicators).
33 A4.C.6 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install steering knuckle assemblies.
34 A4.C.7 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install short and long arm suspension system coil springs and spring insulators.
35 A4.C.8 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install torsion bars and mounts.
36 A4.C.9 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install stabilizer bar (sway bar) bushings, brackets, and links.
37 A4.C.10 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install strut cartridge or assembly, strut coil spring, insulators (silencers), and upper strut bearing mount.
38 Oldie C. Suspension Systems Diagnosis and Repair Lubricate suspension and steering system pivot points. (Grease Job)
39 Oldie C. Suspension Systems Diagnosis and Repair Remove, inspect, and install coil springs and spring insulators.
40 A4.C.11 P-3 C. Suspension Systems Diagnosis and Repair Inspect, remove and install track bar, strut rods/radius arms, and related mounts and bushings.
41 A4.C.12 P-1 C. Suspension Systems Diagnosis and Repair Inspect rear suspension system leaf spring(s), bushings, center pins/bolts, and mounts.
42 Oldie C. Suspension Systems Diagnosis and Repair Inspect electric power-assisted steering. (suspension?)
43 Oldie C. Suspension Systems Diagnosis and Repair Diagnose, inspect, adjust, repair or replace components of electronically controlled suspension systems using a scan tool; determine necessary action.
44 Oldie C. Suspension Systems Diagnosis and Repair Remove, inspect, and install strut cartridge or assembly, strut coil spring and insulators (silencers).
45 A4.D.1 P-1 D. Related Suspension and Steering Service Inspect, remove, and replace shock absorbers; inspect mounts and bushings.
46 A4.D.2 P-1 D. Related Suspension and Steering Service Remove, inspect, and service or replace front and rear wheel bearings.
47 A4.D.3 P-3 D. Related Suspension and Steering Service Describe the function of the power steering pressure switch.
48 A4.E.1 P-1 E. Wheel Alignment Diagnosis, Adjustment, and Repair Diagnose vehicle wander, drift, pull, hard steering, bump steer, memory steer, torque steer, and steering return concerns; determine necessary action.
49 A4.E.2 P-1 E. Wheel Alignment Diagnosis, Adjustment, and Repair Perform pre-alignment inspection and measure vehicle ride height; perform necessary action.
50 Oldie E. Wheel Alignment Diagnosis, Adjustment, and Repair Measure vehicle riding height; determine necessary action.
51 A4.E.3 P-1 E. Wheel Alignment Diagnosis, Adjustment, and Repair Prepare vehicle for wheel alignment on alignment machine; perform four-wheel alignment by checking and adjusting front and rear wheel caster, camber; and toe as required; center steering wheel.
52 Oldie E. Wheel Alignment Diagnosis, Adjustment, and Repair Check and adjust front and rear wheel camber; perform necessary action.
53 Oldie E. Wheel Alignment Diagnosis, Adjustment, and Repair Check and adjust caster; perform necessary action.
54 Oldie E. Wheel Alignment Diagnosis, Adjustment, and Repair Check and adjust front wheel toe and center steering wheel.
55 A4.E.4 P-2 E. Wheel Alignment Diagnosis, Adjustment, and Repair Check toe-out-on-turns (turning radius); determine necessary action.
56 A4.E.5 P-2 E. Wheel Alignment Diagnosis, Adjustment, and Repair Check SAI (steering axis inclination) & included angle; determine necessary action.
57 Oldie E. Wheel Alignment Diagnosis, Adjustment, and Repair Check and adjust rear wheel camber & toe.
58 A4.E.6 P-1 E. Wheel Alignment Diagnosis, Adjustment, and Repair Check rear wheel thrust angle; determine necessary action.
59 A4.E.7 P-2 E. Wheel Alignment Diagnosis, Adjustment, and Repair Check for front wheel setback; determine necessary action.
60 A4.E.8 P-3 E. Wheel Alignment Diagnosis, Adjustment, and Repair Check front and/or rear cradle (subframe) alignment; determine necessary action.
61 A4.E.9 P-2 E. Wheel Alignment Diagnosis, Adjustment, and Repair Reset steering angle sensor.
62 A4.F.1 P-1 F. Wheel and Tire Diagnosis & Repair Inspect tire condition; identify tire wear patterns; check for correct tire size and application (load and speed ratings) and adjust air pressure; determine necessary action.
63 Oldie F. Wheel and Tire Diagnosis & Repair Diagnose tire wear patterns; determine necessary action.
64 A4.F.2 P-2 F. Wheel and Tire Diagnosis & Repair Diagnose wheel/tire vibration, shimmy, and noise; determine necessary action.
65 A4.F.3 P-1 F. Wheel and Tire Diagnosis & Repair Rotate tires according to manufacturer s recommendations.
66 Oldie F. Wheel and Tire Diagnosis & Repair Inspect tires; check and adjust air pressure.
67 A4.F.4 P-2 F. Wheel and Tire Diagnosis & Repair Measure wheel, tire, axle flange, and hub runout; determine necessary action.
68 A4.F.5 P-2 F. Wheel and Tire Diagnosis & Repair Diagnose tire pull problems; determine necessary action.
69 A4.F.6 P-1 F. Wheel and Tire Diagnosis & Repair Dismount, inspect, and remount tire on wheel; balance wheel and tire assembly (static and dynamic).
70 A4.F.7 P-2 F. Wheel and Tire Diagnosis & Repair Dismount, inspect, and remount tire on wheel equipped with tire pressure monitoring system sensor.
71 A4.E.8 P-1 F. Wheel and Tire Diagnosis & Repair Inspect tire and wheel assembly for air loss; perform necessary action.
72 A4.E.9 P-1 F. Wheel and Tire Diagnosis & Repair Repair tire using internal patch.
73 A4.E.10 P-2 F. Wheel and Tire Diagnosis & Repair Identify and test tire pressure monitoring system (indirect and direct) for operation; calibrate system; verify operation of instrument panel lamps.
74 A4.E.11 P-1 F. Wheel and Tire Diagnosis & Repair Demonstrate knowledge of steps required to remove and replace sensors in a tire pressure monitoring system.
75 Oldie F. Wheel and Tire Diagnosis & Repair Reinstall wheel; torque lug nuts using correct specification & sequence.
AER Automotive Steering and Suspension
2013 NATEF JOB TASKS COMPLETION REQUIREMENT: P1-95% P2-80% P3-50% Student Name: DETAILED COURSE CONTENT AUTOMOTIVE SUSPENSION AND STEERING TECHNICIAN DEMONSTRATE PROFICIENCY IN SUSPENSION AND STEERING
More informationHemet High School NATEF SUSPENSION AND STEERING CHECKLIST. Name Date Period
Hemet High School NATEF SUSPENSION AND STEERING CHECKLIST Name Period For every task in Suspension and Steering, the following safety requirement must be strictly enforced: Comply with personal and environmental
More informationAutomotive Suspension and Steering Course number-20123
Automotive Suspension and Steering Course number-20123 There is a high demand for trained individuals in the automotive service field. The desire for the students to receive industry-based training at
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT142 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS LAB. 3 Credit Hours. Prepared by: Gerard Uhls Date: December 2011
JEFFERSON COLLEGE COURSE SYLLABUS AUT142 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS LAB 3 Credit Hours Prepared by: Gerard Uhls Date: December 2011 Revised by: Gerard Uhls Date: September 16. 2016 Chris
More informationJEFFERSON COLLEGE COURSE SYLLABUS AUT141 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS. 3 Credit Hours. Prepared by: Gerard Uhls Date: November, 2011
JEFFERSON COLLEGE COURSE SYLLABUS AUT141 AUTOMOTIVE STEERING AND SUSPENSION SYSTEMS 3 Credit Hours Prepared by: Gerard Uhls Date: November, 2011 Revised by: Gerard Uhls Date: September 16, 2016 Chris DeGeare,
More informationUNIBODY/FRAME/WHEEL ALIGNMENT II ABCT 2212
UNIBODY/FRAME/WHEEL ALIGNMENT II ABCT 2212 A. Course Description Credits: 6.00 Lecture Hours/Week: 1.00 Lab Hours/Week: 5.00 OJT Hours/Week: 0 Prerequisites: None Corequisites: None MnTC Goals: None This
More informationAutomobile/Automotive Mechanics Technology/Technician CIP Task Grid
1 100 ORIENTATION 101 Explain and follow all lab rules. 102 Participate in basic shop management. 103 Participate in parts ordering. 104 Demonstrate auto shop safety and hygiene. 105 Demonstrate the use
More informationRevised April Unit/Standard Number. Proficiency Level Achieved: (X) Indicates Competency Achieved to Industry Proficiency Level
Secondary Task List 100 ORIENTATION 101 Explain and follow all lab rules. 102 Participate in basic shop management. 103 Participate in parts ordering. 104 Demonstrate auto shop safety and hygiene. 105
More informationAutomobile/Automotive Mechanics Technology/Technician CIP Task Grid
1 100 ORIENTATION 101 Explain and follow all lab rules. 1 1 10 Participate in basic shop management. 1 1 103 Participate in parts ordering. 1 1 104 Demonstrate auto shop safety and hygiene. 1 1 105 Demonstrate
More information2013 NATEF Task Area A-2 Automatic Transmission7-2013
2013 NATEF Task Area A-2 Automatic Transmission7-2013 A. General Transmission & Transaxle Diagnosis B. Transmission & Transaxle Maintenance & Adjustment C. In-Vehicle Transmission & Transaxle Repair D.
More informationMARTIN COMMUNITY COLLEGE COURSE SYLLABUS Semester/Year: Spring 2011
MARTIN COMMUNITY COLLEGE COURSE SYLLABUS Semester/Year: Spring 2011 COURSE NUMBER: AUT 141 (01) COURSE TITLE: Suspension & Steering Systems CREDIT HOURS: 3 CONTACT HRS/WK: 5 (2 class, 3 lab) INSTRUCTOR:
More information2012 NATEF Task Area A 2 Automatic Transmission
2012 NATEF Task Area A 2 Automatic Transmission A. General Transmission & Transaxle Diagnosis B. Transmission & Transaxle Maintenance & Adjustment C. In Vehicle Transmission & Transaxle Repair D. Off Vehicle
More informationDiesel Technology: Steering and Suspension
Diesel Technology: Steering and Suspension National Skills Crosswalk The following NATEF Suspension and Steering tasks (rev. 2004) are covered in this publication. The chart shows where each task is located
More informationRack and Pinion Steering Inspection and Repair
JOB SHEET 187 Rack and Pinion Steering Inspection and Repair Name: --------------- Station: Date: NATEF Correlation This Job Sheet addresses the following NATEF task(s): 4.B.3 4.B.5 4.B.6 4.B.9.4.B.18
More informationCentral Maine Community College Auburn, ME FOA 190 Brakes, Steering, Suspension & Drivelines. Course Syllabus
Central Maine Community College Auburn, ME 04210 Automotive Ford/ASSET Term: Spring 18 FOA 190 Brakes, Steering, Suspension & Drivelines Instructor: Matt Walsh Course Syllabus Course Description This course
More informationSR11 Steering, Rack-And-Pinion
Uniform Procedures For Collision Repair SR11 Steering, Rack-And-Pinion SR Menu Procedure Menu 1. Description This procedure describes diagnosis, replacement, and inspection of a rack-and-pinion steering
More information2005 DVP Licensing Pty Ltd page 1
C001 Identify and interpret engine concern; determine C002 C003 Research applicable vehicle and service information, such as internal engine operation, vehicle service history, service precautions, and
More informationSUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS
XJ SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 7 page REAR SUSPENSION... 16 ALIGNMENT TABLE OF CONTENTS page AND WHEEL ALIGNMENT...1 DIAGNOSIS AND TESTING SUSPENSION
More informationSR01 Steering, Gearbox
Uniform Procedures For Collision Repair SR01 Steering, Gearbox 1. Description This procedure describes the diagnosis, repair, and inspection of a gearbox-type steering system. Requirements for both manual
More informationAutomobile/Automotive Mechanics Technology/Technician CIP Task Grid
Secondary Task List 100 ORIENTATION 101 Explain and follow all lab rules. 102 Participate in basic shop management. 103 Participate in parts ordering. 104 Demonstrate auto shop safety and hygiene. 105
More informationCourse Syllabus
Course Syllabus 2018 2019 Program Automotive Technology I Course AUTO 1001 Brakes, Steering & Suspension (NATEF MLR) Instructor Scott Zubrod 763-684-2223 Scott.Zubrod@wrighttech.org Course Description
More information2012 NATEFAutomobile Accreditation. Maintenance & Light Repair Task List
2012 NATEFAutomobile Accreditation Maintenance & Light Repair Task List 2012 ENGINE REPAIR 2012 NATEF Automobile Accreditation Maintenance and Light Repair Task List General 1. Research applicable vehicle
More informationAutomotive Technician (NATEF) Level I &II
Automotive Technician (NATEF) Level I &II Program Description: The Automotive Technology program incorporates the Automotive Service Excellence (ASE) program certification standards and the National Automotive
More informationSouth Portland, Maine 04106
South Portland, Maine 04106 Title: Steering & Suspension 2 Catalog Number: AUTO-112 Credit Hours: 2 Credit Hours: 1 hour lecture / 1 hour lab Semester: Fall 2017 Total Contact Hours: 15 / 30 Instructors:
More information2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8
2010 Prince Edward Island Department of Education and Early Childhood Development P.O. Box 2000, Charlottetown Prince Edward Island Canada, C1A 7N8 Tel. (902) 368-4600 Fax. (902) 368-4622 http://www.gov.pe.ca/eecd/
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
ZJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 6 page REAR SUSPENSION... 14 ALIGNMENT INDEX page GENERAL INFORMATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING SUSPENSION
More information2017 NATEF Automobile - Maintenance and Light Repair Tasks - Auto Upkeep Correlation
2017 NATEF Automobile - Maintenance and Light Repair Tasks - Auto Upkeep Correlation Please Note: Much of the content and hands-on activities in the Auto Upkeep curriculum correlate to 2017 NATEF Automobile
More informationAPPRENTICE TECHNICIAN PROGRESS LOG
APPRENTICE TECHNICIAN PROGRESS LOG APPRENTICE INRUCTIONS: At the end of each day track your progress on the attached log by including work order number and date next to each new skill you perform. Have
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
TJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 5 page REAR SUSPENSION... 12 ALIGNMENT INDEX page GENERAL INFORMATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING SUSPENSION
More informationA U T O. Maintenance and Light Repair. National Institute for AUTOMOTIVE SERVICE EXCELLENCE
S T U D Y G U I D E A U T O Maintenance and Light Repair National Institute for AUTOMOTIVE SERVICE EXCELLENCE Overview This guide is intended to help technicians study for the ASE Auto Maintenance & Light
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
TJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 6 page REAR SUSPENSION... 13 ALIGNMENT INDEX page DESCRIPTION AND OPERATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING SUSPENSION
More informationSU01 Independent, Strut
Uniform Procedures For Collision Repair SU01 Independent, Strut 1. Description This procedure describes the diagnosis, repair, and inspection of an independent, strut-type suspension system. 2. Purpose
More informationGENERAL INFORMATION. Wheel Alignment Theory & Operation
Fig. 1: Checking Steering Linkage GENERAL INFORMATION Wheel Alignment Theory & Operation ADJUSTMENTS NOTE: This article is intended for general information purposes only. This information may not apply
More information4 Wheel Alignment Steering and Suspension Diagnosis
JOB SHEET A4E1: Diagnose Tire Wear Problems Start Date: Name: End Date: Make: Model: Year: VIN: Mileage: Learning Objective/NATEF Task Diagnose vehicle wander, drift, pull, hard steering, bump steer, memory
More informationCENTRAL MAINE COMMUNITY COLLEGE Auburn, ME Course Syllabus
CENTRAL MAINE COMMUNITY COLLEGE Auburn, ME 04210 Automotive Technology Term: Spring 18 AUT 292 Computerized Chassis Controls Instructor: Carl Hinkley Course Syllabus Course_Description This course will
More informationNATEF Task Area A 5 Brake Systems
NATEF Task Area A 5 Brake Systems A. General Brake System Diagnosis B. Hydraulic System Diagnosis & Repair C. Drum Brake Diagnosis & Repair D. Disc Brake Diagnosis & Repair E. Power Assist Diagnosis &
More informationSUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS
DN SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION - 4x2... 6 page FRONT SUSPENSION - 4x4... 14 REAR SUSPENSION... 23 ALIGNMENT TABLE OF CONTENTS page AND OPERATION WHEEL
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
WJ SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 4 page REAR SUSPENSION... 15 ALIGNMENT INDEX page AND WHEEL ALIGNMENT... 1 SERVICE PROCEDURES PRE-ALIGNMENT... 2 AND WHEEL
More informationAutomotive Technology Principles, Diagnosis, and Service 2016
A Correlation of Automotive Technology Principles, Diagnosis, and Service 2016 To the Florida Department of Education Instructional Materials Correlation Automotive Maintenance and Light Repair Course
More informationChapter. Steering System Technology
Chapter 78 Steering System Technology Objectives After studying this chapter, you will be able to: Explain the operating principles of steering systems. Identify the major parts of a steering system. Compare
More informationCourse Syllabus AUT Suspension and Steering Systems General Curriculum
Course Syllabus AUT-141-60 Suspension and Steering Systems General Curriculum Syllabus Contents: Course Description Course Objectives Weekly Outline Student Evaluation Safety Regulations Tool List Time
More informationNATEF Automobile - Maintenance and Light Repair Tasks - Auto Upkeep Correlation
NATEF Automobile - Maintenance and Light Repair Tasks - Auto Upkeep Correlation Please Note: Much of the content and hands-on activities in the Auto Upkeep curriculum correlate to 2012 NATEF Automobile
More informationAutomotive Service Technology
Sets Focus Area: with Performance (KS/PI) Automotive Service Technology AHTA10.04 Perform skills and determine necessary actions needed in the automatic transmission area of automotive service and repair.
More informationFRONT SUSPENSION GROUP 2 FRONT SUSPENSION 2-1 CONTENTS SPECIFICATIONS VC-1, VC-2, VC-3 VY-1 TOOL LIST. Page
GROUP 2 FRONT SUSPENSION CONTENTS Page Specifications 1 Tool List.... 1 Torque Reference 2 Preparation for Measuring Front End Alignment... 2 Front Suspension Height Adjustment 3 Front Suspension Alignment
More informationFocus Area Level Report Including Knowledge and Skills, and Performance Indicators
Including Knowledge and Skills, and AHTA10.03 Perform Lube, Oil, and Filter (LOF) and preventive maintenance needed for entry-level employment of the automobile service and repair field. AHTA10.03.05.01
More informationSteering and Suspension
The Steering and Suspension system is engineered to allow the vehicle to turn and absorb road irregularities. The suspension is comprised of springs, suspension arms or links and shock dampers. These components
More informationMacPherson Strut Suspension Service
JOB SHEET A4C10: MacPherson Strut Service Start Date: Name: End Date: Make: Model: Year: VIN: Mileage: Learning Objective/NATEF Task Remove, inspect, and install strut cartridge or assembly, strut coil
More informationCamber Angle. Wheel Alignment. Camber Split. Caster Angle. Caster and Ride Height. Toe Angle. AUMT Wheel Alignment
AUMT 1316 - Wheel Alignment 11/15/11 Camber Angle Wheel Alignment Donald Jones Brookhaven College Camber Split Camber is the amount that the centerline of the wheel tilts away from true vertical when viewed
More informationAUTO-1400: AUTOMOTIVE ALIGNMENT, STEERING AND SUSPENSION
AUTO-1400: Automotive Alignment, Steering and Suspension 1 AUTO-1400: AUTOMOTIVE ALIGNMENT, STEERING AND SUSPENSION Cuyahoga Community College Viewing:AUTO-1400 : Automotive Alignment, Steering and Suspension
More informationWheel Alignment And Diagnostic Angles (STE04)
Module 1 Wheel Alignments Wheel Alignment And Diagnostic Angles (STE04) Wheel Alignments o Conditions Requiring An Alignment o Conditions Requiring An Alignment (cont d) o Why We Do Checks And Alignments
More informationSU11 Independant, SLA
Uniform Procedures For Collision Repair UPCR SU11 Independant, SLA 1. Description This procedure describes the diagnosis, repair, and inspection of an independent, short-arm, long-arm (SLA) suspension
More informationCourse Information Course Number: AMT 1003 Course Name: Automotive Foundations
Course Information Course Number: AMT 1003 Course Name: Automotive Foundations Credit-By-Assessment (CBA) Competency List Written Assessment Competency List Electrical Describe the effects of temperature,
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
DN SUSPENSION 2-1 SUSPENSION CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 5 page REAR SUSPENSION... 13 ALIGNMENT INDEX page GENERAL INFORMATION WHEEL ALIGNMENT... 1 DIAGNOSIS AND TESTING PRE-ALIGNMENT
More information2005 DVP Licensing Pty Ltd page 1
C302 Perform battery state-of-charge test; determine C303 C587 C286 C287 Perform battery capacity test; confirm proper battery capacity for vehicle application; determine Perform battery capacity test(or
More informationA 1 SERVICE SPECIFICATIONS
A1 A2 Clutch CLUTCH Specifications Pedal height (from asphalt sheet) Release point (from pedal stroke end position) Push rod play at pedal top Pedal freeplay Disc rivet head depth Disc runout Diaphragm
More informationINSTALLATION INSTRUCTION Rev A
INSTALLATION INSTRUCTION 88587 Rev A FOR RANCHO SUSPENSION SYSTEM RS6587B: 2009 DODGE RAM 1500 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING:
More informationFRONT SUSPENSION AND STEERING LINKAGE
A FRONT SUSPENSION AND STEERING LINKAGE CONTENTS GROUP 2 Page LOWER BALL JOINTS 12 LOWER CONTROL ARM AND SHAFT... 9 LOWER CONTROL ARM STRUT 12 PRE-ALIGNMENT INSPECTION Height Adjustment., 4 RUBBER ISOLATED
More informationVehicle Level Steering and Suspension Alignment Service and Repair Wheel Alignment. Wheel Alignment
Page 1 of 7 2002 Dodge Truck Caravan FWD V6-3.3L VIN R Vehicle Level Steering and Suspension Alignment Service and Repair Wheel Alignment Wheel Alignment PRE-WHEEL ALIGNMENT INSPECTION Before any attempt
More informationVERNON COLLEGE SYLLABUS. DIVISION: Information & Industrial Technology DATE: Fall COURSE NUMBER AND TITLE: AUMT 1416 Suspension and Steering
VERNON COLLEGE SYLLABUS DIVISION: Information & Industrial Technology DATE: Fall 2010 CREDIT HRS: 4 HRS/WK LEC: 3 HRS/WK LAB: 3 LEC/LAB: 6 I. CATALOG DESCRIPTION: Theory and operation of automotive suspension
More informationDIAGNOSIS AND TESTING
DIAGNOSIS AND TESTING SUSPENSION AND STEERING SYSTEM 2007 SUSPENSION Suspension - Nitro CONDITION POSSIBLE CAUSES CORRECTION FRONT END NOISE 1. Loose or worn wheel bearings. 1. Replace wheel bearings.
More informationBasic Wheel Alignment Techniques
Basic Wheel Alignment Techniques MASTERING THE BASICS: Modern steering and suspension systems are great examples of solid geometry at work. Wheel alignment integrates all the factors of steering and suspension
More informationSuspension and Steering Alignment
Suspension and Steering Alignment Matthew Whitten Brookhaven College Alignment Components Ride height Caster Camber Included angle Scrub radius Thrust angle Toe Turning radius Toe out on turns Steering
More informationSUSPENSION 2-1 SUSPENSION CONTENTS
PL SUSPENSION 2-1 SUSPENSION CONTENTS page FRONT SUSPENSION... 10 REAR SUSPENSION... 39 page WHEEL ALIGNMENT... 1 WHEEL ALIGNMENT INDEX page DESCRIPTION AND OPERATION COMPETITION PACKAGE ALIGNMENT... 2
More information2011 MKS Workshop Manual. SECTION : Suspension System - General Information DESCRIPTION AND OPERATION Procedure revision date: 05/25/2010
SECTION 204-00: Suspension System - General Information 2011 MKS Workshop Manual DESCRIPTION AND OPERATION Procedure revision date: 05/25/2010 Wheel Alignment Angles Camber Negative and Positive Camber
More informationINSTALLATION INSTRUCTION 88581
INSTALLATION INSTRUCTION 88581 FOR RANCHO SUSPENSION SYSTEM RS6581B: DODGE RAM READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev C IMPORTANT NOTES! WARNING: This suspension
More information2004 SUSPENSION. Wheel Alignment - Corvette. Caster Cross +/ / Fastener Tightening Specifications Specification Application
2004 SUSPENSION Wheel Alignment - Corvette SPECIFICATIONS WHEEL ALIGNMENT SPECIFICATIONS Wheel Alignment Specifications Camber Cross Caster Cross Suspension Camber Tolerance Caster Tolerance FE1 & FE3
More informationINSTALLATION INSTRUCTION 89400
INSTALLATION INSTRUCTION 89400 FOR RANCHO SUSPENSION SYSTEM RS66400B: 2012 RAM 1500 4WD. READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev B IMPORTANT NOTES! WARNING:
More informationSECTION steering mechanism
07-302.01/ 1 2011MR17 SECTION 07-302.01 GENERAL Description See Figure 1. The includes the steering wheel (1), the steering column, the miter box (3), the steering shafts (2 and 4), and the drag link (7).
More informationGROUP 33 FRONT SUSPENSION CONTENTS WANINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES
GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION........ 33-2 SERVICE SPECIFICATIONS....... 33-3 LUBRICANT.................... 33-4 SPECIAL TOOLS................ 33-4 ON-VEHICLE SERVICE...........
More informationSU41 Solid Axle, Leaf Springs
Uniform Procedures For Collision Repair SU41 Solid Axle, Leaf Springs 1. Description This procedure describes the diagnosis, repair, and inspection of a solid-axle, leaf-spring suspension system. 2. Purpose
More informationReturn To Main Table of Contents GENERAL... 2 STRUT ASSEMBLY LOWER ARM STABILIZER BAR CENTER MEMBER WHEEL AND TIRE...
FRONT SUSPENSION Return To Main Table of Contents GENERAL... 2 STRUT ASSEMBLY... 11 LOWER ARM... 13 STABILIZER BAR... 17 CENTER MEMBER... 19 WHEEL AND TIRE... 21 GENERAL GENERAL SPECIFICATIONS Suspension
More informationMultiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary
Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Wednesday, August 20, 2014, 2:09PM District Advanced Maintenance/Ligh t
More informationModern Auto Tech Study Guide Chapter 67 & 69 Pages Suspension & Steering 32 Points. Automotive Service
Modern Auto Tech Study Guide Chapter 67 & 69 Pages 1280 1346 Suspension & Steering 32 Points Automotive Service 1. The system allows a vehicle s tires & wheels to move up and down as they roll. Steering
More informationFRONT & REAR SUSPENSION SECTIONSU CONTENTS IDX. FRONT SUSPENSION...2 Precautions...2. REAR SUSPENSION...14 Precautions...14
FRONT & REAR SUSPENSION SECTIONSU GI MA EM LC EC CONTENTS FE FRONT SUSPENSION...2 Precautions...2 PRECAUTIONS...2 Preparation...2 SPECIAL SERVICE TOOLS...2 COMMERCIAL SERVICE TOOLS...2 Noise, Vibration
More informationPRODUCT BROCHURE. Straight advice, specialists you understand and...
PRODUCT BROCHURE Shock absorbers PEDDERS STEERING EQUIPMENT Pedders Shock Absorbers Replacement, Sports, Towing, Load Carrying & 4WD Bilstein Shock Absorbers Replacement Shocks to suits European Makes
More informationINSTALLATION INSTRUCTION 88094
INSTALLATION INSTRUCTION 88094 FOR RANCHO SUSPENSION SYSTEM RS6594B 4WD & 2WD NISSAN TITAN READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev D IMPORTANT NOTES! WARNING:
More informationThis file is available for free download at
This file is available for free download at http://www.iluvmyrx7.com This file is fully text-searchable select Edit and Find and type in what you re looking for. This file is intended more for online viewing
More informationThis file is available for free download at
This file is available for free download at http://www.iluvmyrx7.com This file is fully text-searchable select Edit and Find and type in what you re looking for. This file is intended more for online viewing
More informationFRONT SUSPENSION SECTION FSU CONTENTS SUSPENSION FSU-1 SYMPTOM DIAGNOSIS... 2 PRECAUTION... 3 REMOVAL AND INSTALLATION...13 PREPARATION...
SUSPENSION SECTION FSU A FRONT SUSPENSION B C D CONTENTS FSU SYMPTOM DIAGNOSIS... 2 NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING... 2 NVH Troubleshooting Chart...2 PRECAUTION... 3 PRECAUTIONS...
More information1 of 12 8/25/2017, 4:29 PM
1 of 12 8/25/2017, 4:29 PM STANDARD PROCEDURE - WHEEL ALIGNMENT PRE-WHEEL ALIGNMENT INSPECTION Before any attempt is made to change or correct the wheel alignment, the following inspection and necessary
More information2. MEASURE VEHICLE HEIGHT. (b) Measure the vehicle height. Measurement points: C: Ground clearance of front wheel center
ADJUSTMENT If the wheel alignment has been adjusted, and if suspension or underbody components have been removed/installed or replaced, be sure to perform the following initialization procedure in order
More information1. SPECIFICATIONS 2. WHEEL ALIGNMENT Front Suspension. (gas type) Rear Suspension. (gas type)
441101 053 1. SPECIFICATIONS Front Suspension Rear Suspension Description Suspension type Spring type Shock absorber type Stabilizer bar type Suspension type Spring type Shock absorber type Stabilizer
More informationSTEERING SHIMMY DIAGNOSTIC PROCEDURE Article No. 4X2 AND 4X4 VEHICLES
STEERING SHIMMY DIAGNOSTIC PROCEDURE Article No. 4X2 AND 4X4 VEHICLES 98-15-8 FORD: 1988-1997 F SUPER DUTY, F-250 HD, F-350 This TSB article is being republished in its entirety to include the latest level
More informationChapter. Steering System Technology. Basic Steering Systems. Functions of a Steering System. Basic Steering Systems
78 Chapter Steering System Technology Name _ Instructor Date _ Score Objective: After studying this chapter, you will be able to summarize the construction and operation of steering systems. Basic Steering
More informationINSTALLATION INSTRUCTION 88146
INSTALLATION INSTRUCTION 88146 Rev H FOR RANCHO SUSPENSION SYSTEM RS6547: 4WD SUBURBAN/YUKON XL, 4WD TAHOE/YUKON, & 4WD AVALANCHE READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING
More informationFRONT SUSPENSION GROUP CONTENTS GENERAL INFORMATION FASTENER TIGHTENING SPECIFICATIONS GENERAL SPECIFICATIONS...
33-1 GROUP 33 FRONT SUSPENSION CONTENTS GENERAL INFORMATION 33-2 FASTENER TIGHTENING SPECIFICATIONS 33-2 GENERAL SPECIFICATIONS 33-3 SERVICE SPECIFICATIONS 33-3 DIAGNOSIS 33-4 INTRODUCTION TO DIAGNOSIS
More informationSuspension System RS6582B
Suspension System RS6582B Tahoe/Yukon READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING: This suspension system will enhance the off-road performance
More informationSECTION 2C FRONT SUSPENSION TABLE OF CONTENTS
SECTION 2C FRONT SUSPENSION TABLE OF CONTENTS Description and Operation... 2C-2 Front Suspension... 2C-2 Specifications... 2C-4 Component Locator... 2C-5 Front Suspension Assembly... 2C-5 Cross-Sectional
More informationINSTALLATION INSTRUCTION 88088
INSTALLATION INSTRUCTION 88088 For Rancho Suspension Systems RS6588 & RS6589: FORD F-150 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev B IMPORTANT NOTES! WARNING:
More informationFRONT SUSPENSION SECTION CONTENTS E SUSPENSION FSU-1 FSU
FRONT SUSPENSION E SUSPENSION A SECTION FRONT SUSPENSION B C D CONTENTS FSU PRECAUTIONS... 2 Caution... 2 PREPARATION... 3 Special Service Tools... 3 Commercial Service Tools... 3 NOISE, VIBRATION AND
More informationGroup 2 FRONT SUSPENSION CONTENTS
FRONT SUSPENSION 1 Group 2 FRONT SUSPENSION CONTENTS Paragraph Page Front Wheel Bearing Adjustment 8 5 Front Suspension Height Adjustment 9 5 Using Tool C-3608 Without Using Tool C-3608 Front Wheel Alignment
More informationFRONT & REAR SUSPENSION SECTIONSU CONTENTS IDX. FRONT SUSPENSION...2 Precautions...2
FRONT & REAR SUSPENSION SECTIONSU GI MA EM LC CONTENTS EC FE FRONT SUSPENSION...2 Precautions...2 PRECAUTIONS...2 Preparation...2 SPECIAL SERVICE TOOLS...2 COMMERCIAL SERVICE TOOLS...2 Noise, Vibration
More information1. SPECIFICATIONS 2. WHEEL ALIGNMENT
441101 083 1. SPECIFICATIONS Front Suspension Rear Suspension Description Suspension type Spring type Shock absorber type Stabilizer bar type Suspension type Spring type Shock absorber type Stabilizer
More informationSteering Fundamentals
CHAPTER 65 Fundamentals OBJECTIVES Upon completion of this chapter, you should be able to: List the parts of steering systems. Describe the principles of operation of steering systems. Compare linkage
More informationFRONT SUSPENSION SECTION FSU CONTENTS E SUSPENSION FSU-1 FSU
FRONT SUSPENSION E SUSPENSION SECTION FSU A FRONT SUSPENSION B C D CONTENTS FSU PRECAUTIONS... 2 Caution... 2 PREPARATION... 3 Special Service Tools (SST)... 3 Commercial Service Tools... 3 NOISE, VIBRATION
More informationPage 1 of 8 SECTION 204-00: Suspension System - General Information 1998 Contour/Mystique Workshop Manual DIAGNOSIS AND TESTING Procedure revision date: 09/14/2001 Suspension System Special Tool(s) Dial
More informationINSTRUCTION S G-Comp Front Suspension: Chevy Nova Speedway Motors, Inc. 2017
INSTRUCTION S 350-100 G-Comp Front Suspension: 62-67 Chevy Nova Speedway Motors, Inc. 2017 Kit Contents: 91035700 G-Comp Bare Subframe 350101 G-Comp Support Tubes 91035702 G-Comp Front Subframe Hardware
More informationFRONT SUSPENSION SYSTEM
SYSTEM PROBLEM SYMPTOMS TABLE SYSTEM Use the table below to help you find the cause of the problem. The numbers indicate the priority of the likely cause of the problem. Check each part in order. If necessary,
More informationTypical mounting of a dial indicator for a radial check. Moog Automotive, Inc.
Inspect / Service / Test / Replace To find out if the ball joint is loose beyond manufacturer's specifications, use an accurate measuring device. Most load carrying ball joints have a wear limit of 0.060"
More informationINSTALLATION INSTRUCTION 88581
INSTALLATION INSTRUCTION 88581 FOR RANCHO SUSPENSION SYSTEM RS6581B: DODGE RAM READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev D IMPORTANT NOTES! WARNING: This suspension
More information