GMAW FCAW. Fabricator 190 comes with:
|
|
- Antonia Gibbs
- 6 years ago
- Views:
Transcription
1 Fabricator C DC 230 Power, Performance, Features... and Reliability 5Year * Fabricator 90 comes with: Power cord and plug 0ft (3m), Tweco WeldSkill MIG gun 0ft (3m) work cable and clamp Gas regulator/flowmeter Factory fitted gear/ single cylinder rack /.035 reversible drive roll Lifting point Overload Protection! Shuts down the power source to protect the internal electrical components from overheating. Heavy Duty Transformer! The transformer is built to last using premium quality 428 F materials and fully dip varnished then baked for 4 hours. Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repairs Sheet Metal Fabrication Farm/Ranch Auto Body Repair Home DIY Hobbyist Rated Output 90 Amp at 23.4, 5% Duty Cycle 45 Amp at 22, 30% Duty Cycle Max. Open Circuit oltage 60 DC Amperage Range Amp Wire Feed Speed IPM (2-8 m/min) Weight 28 lb (58 kg) Order Information Part No: W00500 Description: Fabricator /230//60 * Limited warranty, refer to warranty schedule. NEW 8 oltage Taps! Providing a wider operating range of 20 to 90 amps with a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 5/6 (7.9mm) thick in a single pass. Simple Operation! Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases. Higher Output! The Fabricator 90 punches out 90 amp maximum output. Quick Change Polarity! Simple, quick change (no tools required) polarity from the front of the power source. 33 lb/44 lb Spool Capacity! Wire compartment design allows easy installation of 44 lb, 33 lb, 0 lb, 8 and 2 wire spool sizes. Metal Feed Plate! The metal wire drive system features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob. Easy To Use Cylinder Rack! Single cylinder rack allows easy roll on loading of the gas cylinder. Spot Timer Kit! Adds a unique spot weld feature to give an accurately controlled spot time when spot welding. ISO 900 Quality System! The certified quality management system guarantees the manufacture and distribution processes of this product. Brilliant Characteristics! Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thicknesses. New Gun! Quality Tweco WeldSkill MIG gun. Tel: Tel: Tel: Fabricator 90 Fax: Fax: Fax: Form No.:
2 Fabricator C DC 230 Features # Cylinder stand allows easy loading for cylinder Easy installation wire spool compartment Burnback control The 2 roll wire drive system with quick change drive rolls & single tension knob Our welding set-up chart explains how to produce an excellent weld start point TWECO No. 4 gun connection Fully varnished and baked mains transformer provides trouble free service #Subject to change without notification. Tel: Tel: Tel: Fabricator 90 Fax: Fax: Fax: Form No.:
3 Fabricator C DC 230 Specifications # Welding DC Maximum output 90 Amp Duty 04 F 90 Amp at 23.4 Output at 30% Duty 04 F 45 Amp at 22 Current Range Number of oltage Settings 8 Welding oltage Range Amp olt Maximum Plate Thickness 5/6 (7.9mm) Wire Diameter Range Mild Steel: ( mm) Stainless Steel: ( mm) Aluminum: ( mm) Flux cored: ( mm) Fitted Feedroll Suits MIG Wire /.035 ( /0.9mm) Warranty Period 5 Years* Approvals CSA (Pending) IEC (CE) Primary Power Primary oltage 230 olt Supply Plug NEMA 6-50P Rated 90 Amp 7.9 ka Lead cord length 0ft (3m) Maximum Input Current 34 Amp MIG Guns Gun Type 200 Amp TWECO WeldSkill Gun Length 0ft (3m) Part Number 027 Nozzle Part No: 2-50 Size: /2 (2.7mm) Contact Tip Part No: -30 Size:.030 (0.8mm) Diffuser Part No: 5 Liner Part No: Size: ( mm) Dimensions & Weight Dimensions HxWxD 33 x 6.3 x 32.7 (838x44x866mm) Weight 28 lb (58 kg) Process Capabilities # Process Electrode Wire Electrode Polarity Shielding Gas Min Thickness **Max Thickness MIG ().023,.030,.035 Mild Steel (0.6, 0.8, 0.9mm) DC+ Autocraft 70S-6 MIG ().023,.030,.035 Stainless Steel (0.6, 0.8, 0.9mm) DC+ CO 2 (00%) or 22 gauge 5/6 Argon/CO 2 (0.8mm) (7.9mm) Argon/CO 2 or 20 gauge 5/6 Tri-Mix (.0mm) (7.9mm) MIG ().030, gauge 5/6 Aluminum (0.8, 0.9mm) DC+ Argon (00%) (.2mm) (7.9mm) Flux Cored.030,.035, gauge 5/6 Self Shielded (0.8, 0.9,.2mm) DC- N/A (.2mm) (7.9mm) Mild Steel * Limited warranty, refer to warranty schedule. # Subject to change without notification. **Maximum thickness in a single pass. Tel: Tel: Tel: Fabricator 90 Fax: Fax: Fax: Form No.:
4 Fabricator C DC 230 Key Control # Illuminated power switch 2. Over temperature indicator lamp 3. Wire speed control 4. Weld mode switch 5. Spot time control 6. Welding gun connection 7. Welding gun trigger connection 8. oltage step control Optional MIG Guns # Tweco Spraymaster 250 MIG Gun Part No. MS ft (3m) Part No. MS ft (3.6m) The 250 Amp Tweco SprayMaster is the coolest MIG gun for your hottest spray welding applications. Rated at 80% duty cycle using Argon/CO 2. #Subject to change without notification. Tweco No. 2 MIG Gun Part No ft (3m) Part No ft (3.6m) Tweco No. 2 is the professional s choice MIG gun. It s rated at 250 Amp at 60% duty cycle using CO 2 gas. Tel: Tel: Tel: Fabricator 90 Fax: Fax: Fax: Form No.:
5 Fabricator C DC Amp TWECO WeldSkill MIG Gun # Part No. 027 Item Part No. Description Qty 2-50 Nozzle 2-30 Contact Tip 3 5 Gas Diffuser 4 WM50J-50 Conductor Tube 5 WM9 Trigger 6 TA-80 Handle Assembly Contact Tips (0.6mm) (0.8mm) (0.9mm) (.0mm) (.2mm) Nozzles /8 (9.5mm) 2-50 /2 (2.7mm) /8 (6mm) Conduits , 5ft (7.6m) , 5ft (4.5m) , 5ft (4.5m) 42N /64, 5ft (4.5m) #Subject to change without notification. Tel: Tel: Tel: Fabricator 90 Fax: Fax: Fax: Form No.:
6 Fabricator C DC 230 Ordering Information EQUIPMENT OPTIONS PART NO. DESCRIPTION QTY PRICE Fabricator 90 Package W00500 Fabricator 90, Tweco Weldskill MIG gun, 2 roll wire feed system, single cylinder rack, 6ft (.8m) gas hose, gas regulator/flowmeter, 0ft (3m) work lead GUNS Tweco WeldSkill 0ft 027 Gun assembly with 0ft cable (supplied with package), % Tweco No. 2 0ft Gun assembly with 0ft cable, %; gun lead MSAK-354 required Tweco No. 2 2ft Gun assembly with 2ft cable, %; gun lead MSAK-354 required Spraymaster 0ft MS Gun assembly with 0ft cable, % Spraymaster 2ft MS Gun assembly with 2ft cable, % ACCESSORIES MIG gun control lead & 4 pin plug MSAK-354 Connection lead between TWECO MIG guns & Fabricator 90 ictor Regulator/Flowmeter Mixed Gases Medalist 400 Series, HRF Flowmeter Regulator, Argon-Argon/CO2 mix gases ictor Regulator/Flowmeter CO Medalist 400 Series, HRF Flowmeter Regulator, CO2 gas Helmet/Gloves CONSUMABLES Drive Roll /.035 ( /0.9mm) grooved for hard wire Drive Roll (0.9-.2mm) grooved for hard wire Drive Roll ( mm) U grooved for soft wire Drive Roll (.0-.2mm) U grooved for soft wire Drive Roll ( mm) grooved knurl for cored wire Drive Roll /6 (.2-.6mm) grooved knurl for cored wire Contact Tips Gas Diffusers Nozzles Conduits Filler Metals Shielding Gas TOTAL QUOTE PRICE Tel: Tel: Tel: Fabricator 90 Fax: Fax: Fax: Form No.:
GMAW FCAW. 5Year * Fabricator 281 comes with:
Fabricator 28 C DC 208 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repair Garage/Body Shops Fabrication/Construction
More informationGMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output.
Fabricator 40 40 C DC 20 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repairs Sheet Metal Fabrication
More informationTough, Compact... and Portable
INERTER Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW)** Flux Cored
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () MIG
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz
Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More information212 Millermatic MIG Arc Welding Power Source,
Issued Jan. 2013 Index No. DC/12.46 212 Millermatic MIG Arc Welding Power Source, Auto-Set Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One!
Millermatic 212 Auto-Set Issued Oct. 2008 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More information3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range
PowerMaster Range Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded
More informationMillermatic MIG Arc Welding Power Source,
252 Issued April 2013 Index No. DC/12.49 Millermatic MIG Arc Welding Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light
More informationGENERAL WELDING PRODUCTS CATALOG
GENERAL WELDING PRODUCTS CATALOG The Thermadyne Specialty Markets group operates within multiple distribution channels to meet the needs of several distinct industry segments. Specialty Markets These
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)
Millermatic 255 Issued Oct. 2018 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)
Millermatic 255 Issued January 2019 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops
More informationMillermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.
Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG Welders Fully
More informationInverter Welding System
POWER WAVE 455/STT AND POWER FEED 10 DUAL Inverter Welding System NEW! POWER WAVE 455/STT AND POWER FEED 10 DUAL ADVANTAGE LINCOLN HIGHEST PERFORMANCE SYSTEM Superior STT, pulsed GMAW and FCAW welding
More informationArc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources
Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources FP90 Enjoy the ease of wire feed welding at an affordable price. This unit operates on standard 115 volt household current and requires no
More informationMillermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.
Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Sept. 2010 Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG
More informationWelder is warranted for three years, parts and labor. Gun warranted for 90 days, parts and labor.
Millermatic 211 Issued Aug. 2016 Index No. DC/12.58 MIG Power Source, Wire Feeder and Gun Package Quick Specs Light Industrial Applications Light fabrication Maintenance and repair Auto body Farm/home
More informationLight, Compact... and Portable
INERTER Light, Compact... and Portable Year * Dragster 85 comes with: Power cord & plug 2 x dinse 25mm plugs Carrying strap Best package systems Order Information Part No: 0-3077 Description: Dragster
More information70 Series Swingarc Boom-Mounted
70 Series Swingarc Boom-Mounted Wire Feeder Issued Jan. 2015 Index No. M/13.11 Quick Specs Heavy Industrial Applications Heavy Manufacturing Metal Fabrication Construction Light Manufacturing Processes
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P)
Multimatic 255 MIG/Multiprocess Power Source, Wire Feeder and Gun Package Issued Nov. 2018 Index No. DC/12.9 Quick Specs Industrial Applications Contract welding services Plant maintenance shops General
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders 2-Roll or 4-Roll Heavy Duty Industrial Feeders Designed for MIG and cored wire welding in job shop and manufacturing environments, the rugged LF-72
More informationIssued Feb Index No. M/ Series
Issued Feb. 017 Index No. M/.0 70 Series Constant-Speed Wire Feeder Quick Specs Heavy Industrial Applications Heavy manufacturing Metal fabrication Construction Light manufacturing Processes MIG (GMAW)
More informationIssued Jan Index No. M/ Series
Issued Jan. 2015 Index No. M/3.0 70 Series Constant-Speed Wire Feeder Quick Specs Heavy Industrial Applications Heavy Manufacturing Metal Fabrication Construction Light Manufacturing Processes MIG (GMAW)
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P)
Multimatic 255 MIG/Multiprocess Power Source, Wire Feeder and Gun Package Issued January 2019 Index No. DC/12.9 Quick Specs Industrial Applications Contract welding services Plant maintenance shops General
More information70 Series Swingarc. The Power of Blue. Quick Specs. Boom-Mounted Wire Feeder
70 Series Swingarc Issued Feb. 2012 Index No. M/13.11 Boom-Mounted Wire Feeder Quick Specs Heavy Industrial Applications Heavy Manufacturing Metal Fabrication Construction Light Manufacturing Processes
More informationTransmig F: CIGWELD.COM.AU
AUTO SET WELDING INVERTER Transmig 1300 654 674 F: 03 9474 7391 enquiries@cigweld.com.au CIGWELD.COM.AU Our customers spoke and we listened. CIGWELD have been listening to market feedback about having
More informationPipePro Welding System
PipePro Welding System Root-Fill-Cap Welding Issued Apr. 00 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe Fabrication
More informationPipePro Welding System
PipePro Welding System Root-Fill-Cap Welding Issued Feb. 008 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe
More informationVIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018
VIPER 150 - Multi-Function Inverter Welder-MIG-MMA 30-150 Amps #KUMJRVM150 Ex GST Inc GST $430.00 $473.00 $400.00 $440.00 Special Ends 31/12/2018 ORDER CODE: W245 MODEL: VIPER 150 Type: MIG / MMA & Multifunction
More informationLF-72 AND LF-74 WIRE FEEDERS
LF-72 AND LF-74 WIRE FEEDERS Shown with options: See page 4 for all models ISO 9001:2000 14001:2004 2-ROLL OR 4-ROLL HEAVY DUTY INDUSTRIAL FEEDERS Designed for MIG and cored wire welding in job shop and
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output
More informationPipeWorxFieldPro System
PipeWorxFieldPro System Issued June 2013 Index No. PWS/6.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Field Operations Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output
More informationVIPER MIG-MMA Welder Package Amps #KUMJRVW182 $ $ Product Brochure For K019A. Description. Features
VIPER 182 - MIG-MMA Welder Package 30-180 Amps #KUMJRVW182 Package Deal Ex GST Inc GST $530.00 $583.00 Package Contents - SAVE $51.50 (Inc) 1 x W244 - VIPER 182 Multi-Function Inverter Welder-MIG-MMA $519.00
More informationMIG Guns & Accessories
MIG Guns & Accessories MIG Guns Recommended for applications using solid and flux core wire Guns are complete with 15' cable length A complete selection of replacement parts for most brands of guns is
More informationPower MIG. The Professional s Choice.
WIRE FEEDER/WELDERS Power MIG. The Professional s Choice. When you want the flexibility of more than just a MIG machine, the new is the choice for you. Lincoln Chopper Technology delivers more welding
More informationProcesses MIG (GMAW) Welding. Input Power 24 VAC, 50/60 or 100 Hz
XR -Control Issued April 2005 Index No. M/1.7 Push-Pull Wire Feed System Quick Specs Heavy Industrial Applications Emergency Vehicles Recreational Vehicles Shipbuilding Tool Boxes Trucks and Trailers Heat
More informationLN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS
LN-9 AND LN-9 GMA Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA LN-9 GMA shown with CV-655 power source, K1524-1 universal wire reel stand, K1504-1 50/60 lb. coil adapter, K163 undercarriage
More informationTECHNICAL SPECIFICATIONS
Multi-WeldTM 350 MULTI-OPERATOR Connect Several DC+ Welders to One Power Supply. The is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the
More informationPower MIG. The Professional s Choice.
WIRE FEEDER/WELDERS Power MIG. The Professional s Choice. When you want the flexibility of more than just a MIG machine, the new is the choice for you. Lincoln Chopper Technology delivers more welding
More informationRFP # Welding Equipment, Supplies, and Bottled Gas SHELF OR CATALOG DISCOUNT
RFP #17-04-04 - Welding Equipment, Supplies, and Bottled Gas Commodity #450-042 Expires: July 2020 Bid Reference: RFP #17-04-04 Commodity: #450-042 Buyer: Janet Bradley Bid Reference: RFP #17-04-04 Expries:
More informationtaunton Broadway Route 138
MIL300837 Miller ArcStation 30FX Welding Table $279.99 MIL300850 X-Clamps 5 $39.99 each The Miller ArcStation 30FX is the ideal work surface for the welder who requires portability and space savings. The
More informationLarger area of contact, meaning big pushing force with less damage to the surface of the wire.
The Innovation The Planetics drive feeder transports the wire by means of two hyperbolically profiled rollers that in a planetary manner rotate around the welding wire. The drive power is transmitted from
More informationMIG/MAG-Welding Torch Push-Pull Plus
T e c h n o l o g y f o r t h e W e l d e r s W o r l d. MIG/MAG-Welding Torch Push-Pull Plus The versatile torch, with the Plus The Features: Fits any commercially available wire drive unit by using a
More informationPipeWorx Welding System
PipeWorx Welding System Issued Aug. 009 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe The Power
More informationDescription. Order TECHNICAL SPECIFICATIONS
SEMIAUTOMATIC WIRE FEEDERS Semiautomatic, Constant Speed Wire Feeders The are semiautomatic constant speed wire feeders that provide dependable performance and reliable operation, making them ideal for
More informationPipeWorx Welding System
PipeWorx Welding System Issued Jan. 011 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes
More informationMULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS
FLEXTEC 650X MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS Shown: K3425-1 SIMPLE. RELIABLE. FLEXIBLE. This multi-process welder delivers up to 815 amps of welding power for a variety of applications,
More informationSemi-Automatic Wire Feeders. Semi-Automatic Contents Wire Feeders. Equipment
Semi-Automatic Contents Wire Feeders Semi-Automatic Wire Feeders LF-72 & LF-74 LN-742 LN-8 LN-9 LN-10 DH-10 Power Feed TM 25M Power Feed TM 10M Power Feed TM 10M Dual LN-23P LN-25 Page 2 Page 3 Page 4
More informationLN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC
LN-8 Semiautomatic Wire Feeder LN-8 WIRE FEEDER LN-8 shown with DC-600 power source, K1524-1 universal wire reel stand, K1557-1 swivel platform and a Magnum 400 gun and cable assembly. The LN-8 is a semiautomatic
More informationPOWER MIG 210 MP MULTI-PROCESS WELDING MACHINE
POWER MIG 210 MP MULTI-PROCESS WELDING MACHINE Versatile, Rugged, Simple to Use. The POWER MIG 210 MP power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to
More informationPistol Grip Guns. Processes MIG (GMAW) Welding with aluminum wire and other soft alloys Pulsed MIG (GMAW-P) with pulsing power source
Pistol Grip Guns Spoolmatic Quick Specs Heavy Industrial Applications Emergency Vehicles Recreational Vehicles Trucks and Trailers Boat/Yacht Building Sign Manufacturers The Power of Blue. The Spoolmatic
More informationAlumaFeed Synergic Aluminum Welding System
AlumaFeed Synergic Aluminum Welding System Issued Oct. 011 Index No. DC/34 MIG Arc Welding Power Source Quick Specs Industrial Applications Boat, Ship and Yacht Building Recreational Vehicles Trucks and
More informationMINI MIG MIG Welder Amps
MINI MIG 180 - MIG Welder 35-180 Amps #KMM180 ORDER CODE: W240 MODEL: MINI MIG 180 Type: MIG Part Number: KMM180 Voltage (V): 240 Recommended Plug Amperage (amp): 15 Welding Current Range MIG (amp): 35-180
More informationEngine Driven Welding Equipment
Engine Driven Welding Equipment AEQEDW Rev 1 1300 654 674 I www.cigweld.com.au Introduction Contents CIGWELD Professional: When welding is your business At Victor Technologies we distinguish ourselves
More informationADVANCEMIG Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps
ADVANCEMIG 200 - Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps ORDER CODE: Ex GST Inc GST $2,194.00 $2,523.10 W1107 MODEL: ADVANCEMIG 200 Type: MIG / TIG / MMA & Multifunction Part Number:
More informationSubarc DC Series. Processes Submerged Arc (SAW) Stick (SMAW) Air Carbon Arc Cutting and Gouging (CAC-A) Subarc DC 650 shown.
Subarc DC Series Issued August Index No. DC/9. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy Fabrication Pipe Manufacturing Pressure Vessel Processes
More informationRepeatable welds again, and again, and again
INERTER DC CC 150 Repeatable welds again, and again, and again 5 Year * Ultima 150 comes with: Ultima 150 unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma
More informationThermal Arc Professional: when welding is your business. Introducing the Portafeed VS 212. Portafeed VS 212
Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded following
More informationTransmig 3 Phase & Synergic Pulse
Transmig 3 Phase & Synergic Pulse CIGWELD Professional: When welding is your business At CIGWELD we distinguish ourselves from our competition through superior featured, dependable products, technical
More informationV350-PRO. (1) Advanced Process Panel only. TECHNICAL SPECIFICATIONS
ENGINE MULTI-PROCESS DRIVEN WELDERS Invertec Designed Smart. Built Tough. V350-PRO The is a versatile, multi-purpose, multi-process power source that s lightweight and portable. Available in Construction,
More informationPrecision TIG 375. The Power To Perform! Advantage Lincoln TIG WELDERS. Output. Input 1 PHASE. Publication E /05
TIG WELDERS Precision TIG 375 The Power To Perform! The Precision TIG TM 375 delivers the Power to Perform setting a new standard in Square Wave Technology. Combining outstanding value-added features and
More informationTweco Spray Master V-Series Air-Cooled MIG Guns
MIG/FLUX CORED MAX OUTPUT 450 AMPS DUTY CYCLE 80% WIRE SIZE UP TO 3/32 " (2.4 mm) Tweco Spray Master V-Series Air-Cooled MIG Guns COOLED AIR USAGE HEAVY DUTY Patents Pending You Spoke, We Listened The
More informationOPERATION MANUAL M185. MIG/flux wire feeder welder. Serial Number: Where Purchase: Date of purchased:
OPERATION MANUAL M185 MIG/flux wire feeder welder Serial Number: Where Purchase: Date of purchased: CONTENT 1. Safety... 2 2. Electrical principle drawing... 4 3. Specifications... 5 4. Front and rear
More information2017 Catalog. MIG Guns, Welding Accessories & Consumables. esab.com
MIG Guns, Welding Accessories & Consumables 2017 Catalog esab.com U.S. Customer Care: 800-426-1888 Canada Customer Care: 905-827-4515 International Customer Care: 940-381-1212 Tweco - a world leader in
More informationPower Feed 10R. Compact Wire Drive System for Automation. Processes. Description. Recommended General Options. Advantage Lincoln
AUTOMATIC WIRE FEEDERS Power Feed 10R Compact Wire Drive System for Automation The is a high performance, digitally controlled wire feeder designed to be a part of a modular, multi-process welding system.
More informationINDUSTRIAL WIRE FEEDERS FLEX FEED 74 HT, FLEX FEED 84 AND POWER FEED 84
INDUSTRIAL WIRE FEEDERS FLEX FEED 74 HT, FLEX FEED 84 AND POWER FEED 84 Flex Feed 74 HT Available Dual Drive Models Available Boom Mount Models RUGGED, RELIABLE AND READY Flex Feed and Feed Wire Feeders
More informationMUST BE UL LISTED or EQUIVALENT
1 01 2 PKG MIG WELDER Rated Output: 200 Amps at 28 VDC 60% Duty Cycle or 250 A, 28 VDC at 40% Duty Cycle Max Open-Cicuit Voltage: 38 Wire Feed speed: 50-700 IPM Package includes: #MMM252 (#907321) Welder
More informationPROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS
PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS 2018 PRODUCT GUIDE Dent Pulling Solutions for Steel & Aluminum Dual-Spotter Solutions for Steel & Aluminum Panels UNI-9700 DELUXE Aluminum & Steel
More information*Available on select models.
XMT 350 Series Issued Sept. 2017 Index No. DC/18.93 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/trailer manufacturing Fabrication
More information450 Amp Heavy Duty. STANDARD FEATURES: Ergonomic handle Spare switch leads Extra flexible cable Spring strain reliefs Jacketed gooseneck
450 Amp Heavy Duty STANDARD FEATURES: Ergonomic handle Spare switch leads Extra flexible cable Spring strain reliefs Jacketed gooseneck HD450-3545-10 10.035-.045 HD450-052-10 10.052 HD450-116-10 10 1/16
More informationDIRECT CONNECT Solid State Spool Gun
STANDARD FEATURES Economical feeder/gun combination eliminates need for additional wire feeder Lightweight design reduces operator fatigue 0 hose/cable assembly offers maximum portability for remote operation
More informationPRO Robotic Guns. Thru-Arm Torch Current Range: 550A Duty Cycle: 100% Wire Diameter:.035-5/64 in. ( mm) APPLICATIONS
Magnum PRO Robotic Guns ACCESSORIES Processes MIG, MIG Pulsed, Flux-Cored Product Number See chart below Thru-Arm Torch Current Range: 550A Duty Cycle: 00% Wire Diameter:.035-5/64 in. (0.9-2.0 mm) External
More informationPOWER MIG 260 FABRICATION SIMPLIFIED
POWER MIG 260 FABRICATION SIMPLIFIED Fabrication Simplified The POWER MIG 260 welding machine sets the standard for MIG and Flux-Cored welding in light industrial shop fabrication, maintenance, and repair
More informationSTT II Power Wave C300 Power Wave S350. Power Wave 455M/(STT) KEY: Excellent Good Optional. Computer screen showing waveform arc characteristic.
A Wide Variety of Welding Waveforms for Every Application Fast, Reliable Digital Communication Expand or Update With Lincoln s Latest Welding Multi-Process Welding On A Variety Of Materials Waveform Control
More informationTHE AUTOWELD SYSTEM. Automated Pipe Welding System. High Productivity
THE AUTOWELD SYSTEM Automated Pipe Welding System High Productivity THE AUTOWELD SYSTEM The System is so simple, with just a few quick connections you re ready to weld! You re probably wondering how that
More informationCUTMASTER A-SERIES AUTOMATED PLASMA CUTTING SYSTEMS. We Bring Intelligence to the Table. Victor Thermal Dynamics introduces
AUTOMATED PLASMA CUTTING SYSTEMS ictor Thermal Dynamics introduces CUTMASTER A-SERIES The Cutmaster A-Series is the intelligent solution for economical and flexible plasma cutting with the proven reliability
More informationHASSLE FREE GREAT PRICING ON OUR MOST POPULAR PRODUCTS MONEY MATTERS PRODUCT CATALOG
HASSLE FREE GREAT PRICING ON OUR MOST POPULAR PRODUCTS MONEY MATTERS PRODUCT CATALOG EFFECTIVE MARCH 1, 2017 AC 225 K1170 $419 For general purpose AC stick welding, choose one of the most durable and enduring
More informationFLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650
FLEXTEC MULTI-PROCESS WELDERS FLEXTEC 350X, 500, 500P, 650 It Doesn t Get Much Simpler Than FLEXTEC. Out on the construction jobsite or in most fabrication shops, it pays to keep it simple. The Flextec
More informationWelding & Cutting solutions from ESAB
Welding & Cutting solutions from ESAB Arc Equipment Plasma Equipment Gas Apparatus Personal Protection Mechanized Cutting Welding Automation 2014 A full line of arc and plasma equipment, gas apparatus,
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Stick (SMAW) Flux Cored (FCAW) Air Carbon Arc (CAC-A) Cutting and Gouging. Invision 354MP
354MP/456MP Issued Aug. 27 Index No. DC/23 Invision MIG Welding Power Source Quick Specs Industrial Applications Metal Fabrication Heavy Manufacturing Construction Light Manufacturing Processes MIG (GMAW)
More informationMIG Welders. Operator s Manual Model 135WFG Wire Feed Welder
Operator s Manual Model 135WFG Wire Feed Welder MIG Welders WARNING: Do not assemble, install, or operate this equipment without reading ALL of this manual and the safety precautions and warnings illustrated
More informationwith you 2015 FULL-LINE CATALOG MillerWelds.com
with you 2015 FULL-LINE CATALOG MillerWelds.com with you Dreams From left to right: Mark Donnelly Ironworkers Local 40 Jake Wirkuty Miron Construction Stacy Tucker Kyle Tucker Detroit Speed Scott Shriver
More informationMAKE WORK FLY. Eagle 10,000 Plus KEY FEATURES
MAKE WORK FLY Eagle 10,000 Plus Shown: K2343-3 KEY FEATURES A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Eagle 10,000 Plus does a variety
More informationPS MIG Volt MIG Welder Assembly & Operating Instructions
PS07570 201205 MIG135 115 Volt MIG Welder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation
More informationMIG Guns & Consumables
MIG Guns & Consumables BUILT FOR DURABILITY. DESIGNED FOR EASE OF USE. welding.com.au 1300 300 884 The Bernard Difference GENUINE CONSUMABLES. BETTER WELDS. The Bernard Advantage SUPERIOR IN QUALITY All
More information4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip
4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip Art # A-04203 Electrode Start Cartridge Tip Shield Cup Body Shield Cap, Deflector 9-8215 9-8213 9-8237 9-8243 Torch: SL100 with Exposed
More informationTECHNICAL GUIDE. T-Gun Semi-Automatic Water-Cooled MIG Guns 450 amp and 600 amp SAFETY & WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE
TECHNICAL GUIDE T-Gun Semi-Automatic Water-Cooled MIG Guns 450 amp and 600 amp SAFETY & WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING
More informationE EQUIPMENT CATALOG.
E1. 10 2012 EQUIPMENT CATALOG www.lincolnelectric.com About the cover photo Scan this tag for the video of the wind tower construction The cover photo was taken at Katana Summit, LLC during the actual
More informationMIG/MAG-Welding Torch Push-Pull Plus
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. MIG/MAG-Welding Torch Push-Pull Plus The "long-range torch" with the Plus The welding torches of the Push-Pull Plus series especially developed
More informationPart #20279 MIG 250 WELDER ASSEMBLY & OPERATING INSTRUCTIONS
Part #20279 MIG 250 WELDER ASSEMBLY & OPERATING INSTRUCTIONS PDF version available at eastwood.com/20279manual STATEMENT OF LIMITED WARRANTY The Eastwood Company (hereinafter Eastwood ) warrants to the
More informationTable 1 - Available MIG-41 Push-Pull Gun Assemblies
INSTRUCTIONS for F-14-363-A October, 1997 MIG-41 PUSH-PULL GUN FEATURES/BENEFITS couples up with most feeders to create a high performance push-pull system all electric drive automatically synchronizes
More informationSubArc Digital Series
Series Issued June 208 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged
More informationThe plasma arc comes on im me di ate ly when the torch trigger is activated. Make sure the power is OFF before changing consumables.
Choose the consumables (cut charts) WARNING INSTANT-ON TORCHES PLASMA ARC CAN CAUSE INJURY AND BURNS I O The plasma arc comes on im me di ate ly when the torch trigger is activated. Make sure the power
More informationMIG 175. Item# OPERATOR S MANUAL
MIG 175 Item# 164612 OPERATOR S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions may
More informationMIG/Stick/TIG MP200iDV LCD 200 Amp
MIG/Stick/TIG MP200iDV LCD 200 Amp Dual Voltage Multi-Process Welder Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the
More informationOWNER'S MANUAL MP175 MIG COMBINATION UNIT
OWNER'S MANUAL MP175 MIG COMBINATION UNIT THE MP175 REPRESENTS THE LATEST TECHNOLOGY IN MIG COMBINATION UNITS. THE MP175 OPERATES ON 208/230 VOLT AC SINGLE PHASE CURRENT, AND FEATURES "SMOOTH ARC" TRANSFORMER
More informationFor appropriate control boxes see pages Also available in 100 length on Special Order
AEC 200 1# Spool Gun STANDARD FEATURES Economical feeder/gun combination eliminates need for additional wire feeder Lightweight design reduces operator fatigue 50 hose/cable assembly offers maximum portability
More information