Options for the LM Guide

Size: px
Start display at page:

Download "Options for the LM Guide"

Transcription

1 Options for the LM Guide QZ Lubricator Laminated Contact Scraper LaCS Side Scraper Light Sliding Resistance Contact Seal LiCS GC Cap Dedicated for LM Rail Mounting Holes NEW CATALOG No.321-2E

2 OPTIONS For LM Guides, dust-prevention and lubrication accessories are available. You can make a selection according to the application or mounting location. QZ Lubricator Laminated Contact Scraper LaCS Side Scraper Light Sliding Resistance Contact Seal LiCS

3 For options for the LM Guide not mentioned in this catalog (bellows, etc.), see the general catalog. Options for the Ball Screw (QZ Lubricator, wiper ring W) are also available.

4 Table of Symbols for Options Various combinations of options are available. See the table below for symbols for specific options. Symbol UU SS DD ZZ KK GG PP SSHH DDHH ZZHH KKHH QZUU QZSS QZDD QZZZ QZKK QZGG QZPP QZSSHH QZDDHH QZZZHH QZKKHH Dust prevention accessories End seal End seal + side seal + inner seal Double seals + side seal + inner seal End seal + side seal + inner seal + metal scraper Double seals + side seal + inner seal + metal scraper LiCS LiCS + side seal + inner seal End seal + side seal + inner seal + LaCS Double seals + side seal + inner seal + LaCS End seal + side seal + inner seal + metal scraper + LaCS Double seals + side seal + inner seal + metal scraper + LaCS End seal + QZ End seal + side seal + inner seal + QZ Double seals + side seal + inner seal + QZ End seal + side seal + inner seal + metal scraper + QZ Double seals + side seal + inner seal + metal scraper + QZ LiCS + QZ LiCS + side seal + inner seal + QZ End seal + side seal + inner seal + LaCS + QZ Double seals + side seal + inner seal + LaCS + QZ End seal + side seal + inner seal + metal scraper + LaCS + QZ Double seals + side seal + inner seal + metal scraper + LaCS + QZ Seals and a Metal Scraper In addition to LaCS and LiCS, THK also offers other options, such as an end seal made of special synthetic rubber with high wear resistance and a side seal, designed to increase the dust prevention effect. For LM Guide models supported for dust prevention accessories and the overall LM block length (dimension L) with the desired dust prevention accessory attached, see page 11. End seal Used in locations exposed to dust End seal Side seal Used in locations where dust may enter the LM block from its side or bottom surface, such as vertical, horizontal and inverted mounts Inner seal Used in locations severely exposed to dust or cutting chips Inner seal Side seal Double seals Used in locations exposed to much dust or many cutting chips End seal Metal scraper (non-contact) Used in locations where welding spatter may adhere to the LM rail Metal scraper

5 Table of LM Guide Models and Corresponding Options (QZ, LaCS, LiCS and Side Scraper) : available : unavailable 1: For models HSR15 to, a low-resistance end seal is also available (symbol: LL) 2: SS is also applicable to some types of model RSR-Z. Dust prevention LiCS SS DD ZZ KK HH LaCS SHS SSR SNR/SNS SHW 12 to to 50 SRS 7 to 15 to SCR 15 SRG to to 100 SRW 70 to to 150 HSR 1 NR/NRS RSR 2 to 15 W to 15W UU GG PP Lubrication QZ Side Scraper QZ Lubricator

6 QZ Lubricator QZ Casing (2) High-density fiber net (1) Highly oil-impregnated fiber net (End seal) Ball (3) Oil control plate Flow of lubricant Ball cage The structure of the QZ Lubricator consists of three major components: (1) A highly oil-impregnated fiber net (functions to store a lubricant) (2) A high-density fiber net (functions to apply the lubricant to the raceway) (3) An oil control plate (functions to control the flow of the lubricant) The lubricant contained in QZ Lubricator is fed to the LM system based on the principle of capillary action, which is used in felt-tip pens and other products. The QZ Lubricator feeds the right amount of lubricant to the raceway of the LM rail. This allows an oil film to be constantly formed between the rolling elements and the ball raceway, thus significantly extending the lubrication maintenance interval. Features Since it supplements an oil loss, the lubrication maintenance interval can be significantly extended. Since the right amount of lubricant is applied to the ball raceway, an environmentally friendly lubrication system that does not contaminate the surroundings is achieved. It allows the user to select a lubricant that meets the intended use. Significantly Extended Maintenance Interval Attaching the QZ Lubricator helps extend the maintenance interval throughout the whole load range from the light-load area to the heavy-load area. Applications The QZ Lubricator provides an optimal lubrication system for the following requirements. To introduce an eco-friendly machine. To prevent contaminating the surroundings of the machine/ equipment. To eliminate the waste of grease or oil used in the LM Guide. To minimize the piping of the machine. To extend the greasing interval or want to stop greasing. To lubricate the machine only with oil (want to avoid grease lubrication). Grease lubrication Forced centralized lubrication QZ Lubricator LM Guide attached with the QZ Lubricator Note 1: The QZ Lubricator has an air vent. Do not block the vent with grease or the like. Note 2: Those LM Guide models attached with the QZ Lubricator cannot have a grease nipple. When desiring both the QZ Lubricator and a grease nipple to be attached, contact THK. Note 3: The QZ Lubricator is not sold alone.

7 Performance Significantly Extended Maintenance Interval Attaching the QZ Lubricator helps extend the maintenance interval throughout the whole load range from the light-load area to the heavy-load area. Heavy load Calculated service life under a heavy load = 400km Grease lubrication only Service life: 4km Grease + QZ Lubricator LM Guide : Model HSRR1SS Conditions Heavy load Medium load Light load Load Velocity 18.6kN 50m/min.3kN 50m/min 1.4kN 0m/min Service life Calculated service life 400km 30km : 62km Grease : 2 cc/lm block, initial lubrication only QZ Lubricator : 5 cc 2/LM block, initial lubrication only Medium load Light load Grease + QZ Lubricator Grease + QZ Lubricator 00km 000km LM Guide Running Test without Replenishment of Lubricant Effective Use of Lubricant Since the QZ Lubricator feeds the right amount of lubricant to the right place, the lubricant can be used efficiently. Comparison of lubricant consumption after traveling 5,000km Forced lubrication 83.3 SHW21QZ Amount of oil contained in the QZ Lubricator cm 3 1 lubricator/2 lubricators = cm 3 Compared Supplied amount of lubricant: cm 3 Test conditions: 0m/min Forced lubrication 0.03 cm 3 /6 min16667 min = 83.3 cm 3 Lubricant consumption is 1/0 of that of forced lubrication, thus significantly reducing the waste of lubricant. Lubrication Support Effect in a Harsh Environment As a result of conducting a durability test in a harsh environment (environment with coolant, foreign material), a travel distance of 5,000 km was achieved. Test conditions Test result Load Velocity Coolant Foreign material Lubrication SNS HSR P = 0.1 C 60m/min Immersed 48 hours, dried 6 hours Foundry dust (1 µm or less) AFA Grease + QZ Super Multi 68 Operating cycle : 0.1 cc/shot Periodic time: 16min QZ+LaCS SNS Standard type model HSR No breakage Flaking occurs at 3,500km Distance traveled (km)

8 LM Block Length (Dimension L) with QZ Attached (Standard LM block length) Overall LM block length with QZ attached L SNR/ SNS SSR SHS SHW SRS L Standard LM block length 15C/V/R 15LC/LV C/V LC/LV C/V/R LC/LV/LR C/V/R LC/LV/LR C/V/R LC/LV/LR C/V/R LC/LV/LR C/V/R LC/LV/LR C/V LC/LV 15XVY 15XWY/XTBY XV XW/XTB XVY XWY/XTBY XW XW R/C LR/LC R/C LR/LC R/C/RH/CH LR/LC/LRH/LCH R/C/RH/CH LR/LC/LRH/LCH R/C/RH/CH LR/LC/LRH/LCH R/C LR/LC 12 CAM/CRM 12 HRM 14 CAM/CRM 17 CAM/CRM 21 CA/CR 27 CA/CR CA/CR 50 CA/CR 7 7W N W WN 12 12N 12W 12WN 15 15N 15W 15WN QZUU QZSS QZDD QZZZ QZKK QZSSHH QZDDHH QZZZHH QZKKHH

9 SCR SRG SRG/ SRN SRW HSR NR/ NRS RSR 15S S 15A/V A/V LA/LV C/R LC/LR C/R LC/LR C/R LC/LR C/R LC/LR C/R LC/LR LC/LV A/B/R/YR A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB XR/XA/XB XLR/XLA/XLB R/A/B LR/LA/LB R/A/B LR/LA/LB R/A/B LR/LA/LB R/A/B LR/LA/LB R/A/B LR/LA/LB N W WN 12 12N 12W 12WN 15 15N 15W 15WN Standard LM block length QZUU L QZSS QZDD QZZZ QZKK QZSSHH QZDDHH QZZZHH QZKKHH Units: mm Example of model number coding SHS LC 2 QZ KKHH C0 +10L P Z - Type of LM block With QZ Lubricator attached Number of LM blocks on the same rail Symbol for dust prevention option LM rail length (in mm) Symbol for radial clearance Normal (no symbol), light preload (C1), medium preload (C0) With steel tape attached Number of rails used on the same plane Accuracy symbol Normal grade (no symbol), high grade (H), precision grade (P), super precision grade (SP), ultra-super precision grade (UP) This model number indicates that a single-rail unit constitutes one set (i.e., required number of sets when 2 rails are used in parallel is 2 at a minimum). Those models attached with the QZ Lubricator cannot have a grease nipple.

10 Laminated Contact Scraper LaCS Optimal for use in harsh environments subject to foreign material such as fine dust and liquids. Ball cage Ball Laminated Contact Scraper LaCS Liquid Large amount of foreign material For locations with an adverse atmosphere, Laminated Contact Scraper LaCS is available. LaCS removes minute foreign material adhering to the LM rail in multiple stages and prevents it from entering the LM block with its laminated contact structure (3-layer scraper). Features Since the 3 layers of scrapers fully contact the LM rail, LaCS is highly capable of removing minute foreign material. Since it uses oil-impregnated foam synthetic rubber with a self-lubricating function, low friction resistance is achieved. Basic Specifications of LaCS Service temperature range of LaCS: - to +80 Resistance of LaCS: see the table below. Resistance of LaCSexcluding sliding resistance of the LM block and other seals Resistance Resistance Resistance Resistance SHS SSR SNR/SNS SNR/SNS SRS SCR W 12 12W 15 15W Note: Each resistance value in the table represents the maximum resistance value of LaCS when one unit of LaCS is attached on each of both sides of the LM block. However, the value does not include the sliding resistance of the LM block, seals, etc. SCR SHW SRG SRN SRN SRW HSR NR/NRS Unit: N Note 1: LaCS is not sold alone. Note 2: For the maximum service speed of LaCS, contact THK.

11 Performance Test conditionstest environment: water soluble coolant Magnified view of the end seal lip No. 1: without LaCS: lip fractured at 1,700 km Item Description Tested model No. 1 No. 2 Maximum speed Environmental conditions SHSR1SS + 00L (without LaCS) SHSR1SSHH + 00L (with LaCS) 0 m/min Coolant sprayed: 5 times/day f f f Test result No. 1 without LaCS End seal lip fractured at 1,700 km fareas marked with an arrow are fractured. No. 2: with LaCS: no anomaly observed after traveling 5,000 km No. 2 with LaCS Still running after traveling 5,000 km Distance traveled (km) Test conditionstest environment: environment with minute foreign material Lip has not been fractured Item Tested model No. 1 No. 2 Maximum speed, acceleration External load Foreign material conditions Description SNRR1DD + 600L (with double seals) SNRR1HH + 600L (with LaCS only) 60 m/min; 1G.6 kn Type: FCD0#115 (particle diameter: 1 mm or less) Sprayed amount: 1 g/hour (total sprayed amount: 1 g) No. 1: traveled 100 km (with double seals) Test resultamount of foreign material entering the raceway Amount of foreign material Seal configuration entering the raceway: g Sample No.1 Conventional dust prevention (double end-seal) n1 n2 n Large amount of foreign material has entered the ball raceway. No. 2: traveled 100 km (with LaCS only) Sample No.2 LaCS n1 n2 n No foreign material entering the raceway is observed.

12 SNR/ SNS SSR SHS SHW SRS L Standard LM block length 15C/V/R 15LC/LV C/V LC/LV C/V/R LC/LV/LR C/V/R LC/LV/LR C/V/R LC/LV/LR C/V/R LC/LV/LR C/V/R LC/LV/LR C/V LC/LV 15XVY 15XWY/XTBY XV XW/XTB XVY XWY/XTBY XW XW R/C LR/LC R/C LR/LC R/C/RH/CH LR/LC/LRH/LCH R/C/RH/CH LR/LC/LRH/LCH R/C/RH/CH LR/LC/LRH/LCH R/C LR/LC LR/LC 12 CAM/CRM 12 HRM 14 CAM/CRM 17 CAM/CRM 21 CA/CR 27 CA/CR CA/CR 50 CA/CR 7 7W N W WN 12 12N 12W 12WN 15 15N 15W 15WN 15S S UU SS DD ZZ KK SSHH DDHH ZZHH KKHH SCR LM Block Length (Dimension L) with LaCS and Seals Attached (Standard LM block length) Overall LM block length with LaCS attached L

13 L Standard LM block UU length SCR A/V A/V LA/LV SRG C/R LC/LR C/R LC/LR C/R LC/LR SRG/ C/R SRN LC/LR C/R LC/LR LC/LV SRG LC LC LR SRW LR LR LR LR RM RM RM 15A/B/R/YR A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB HSR A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB HA/HB/HR HA/HB/HR HA/HB/HR XR/XA/XB XLR/XLA/XLB R/A/B LR/LA/LB R/A/B LR/LA/LB R/A/B LR/LA/LB NR/NRS R/A/B LR/LA/LB R/A/B LR/LA/LB R/A/B LR/LA/LB R/A/B LR/LA/LB R/A/B LR/LA/LB A grease nipple cannot be attached on types ZZ and KK of model HSR15. Contact THK for details. Example of model number coding SS DD ZZ KK SSHH DDHH ZZHH KKHH SHS LC 2 QZ KKHH C0 +10L P Z - Type of LM block With QZ Lubricator attached Number of LM blocks on the same rail Symbol for dust prevention option LM rail length (in mm) Symbol for radial clearance Normal (no symbol), light preload (C1), medium preload (C0) With steel tape attached Number of rails used on the same plane Accuracy symbol Normal grade (no symbol), high grade (H), precision grade (P), super precision grade (SP), ultra-super precision grade (UP) This model number indicates that a single-rail unit constitutes one set (i.e., required number of sets when 2 rails are used in parallel is 2 at a minimum). Those models attached with the QZ Lubricator cannot have a grease nipple.

14 Table of Incremental Dimension of a Grease Nipple when LaCS is Attached Grease nipple H LaCS End plate Grease nipple mounting location for models SHS, SSR, SNR/SNS,SRG and NR/NRS K Reference surface SHS SSR SNR/SNS SRG 15C/LC 15R/V/LV C/LC V/LV C/LC R/LR/V/LV C/LC R/LR/V/LV C/LC R/LR/V/LV C/LC R/LR/V/LV C/LC R/LR/V/LV C/LC V/LV 15XVY/XWY 15XTBY XV/XW XTB XVY/XWY XTBY XW XW C/LC R/LR C/LC R/LR C/LC/CH/LCH R/LR/RH/LRH C/LC/CH/LCH R/LR/RH/LRH C/LC/CH/LCH R/LR/RH/LRH C/LC R/LR LC LR LC LR LC LR LC LR Incremental dimension with grease nipple H Nipple type A-PT1/8 A-PT1/8 NR/NRS X A/B/LA/LB X R/LR A/B/LA/LB R/LR A/B/LA/LB R/LR A/B/LA/LB R/LR A/B/LA/LB R/LR A/B/LA/LB R/LR LaCS End plate Incremental dimension with grease nipple H Grease nipple Nipple type Grease nipple mounting location for models SHW, SRS and HSR SHW SRS HSR 21CA/CR 27CA/CR CA/CR 50CA/CR 15A/B/R/YR A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB A/B/R/CA/CB/YR LA/LB/LR/HA/HB Incremental dimension with grease nipple E E A-PT1/8 A-PT1/8 Nipple type B-PT1/8 When desiring to attach a grease nipple in other than the above locations, contact THK. Those models attached with the QZ Lubricator cannot have a grease nipple. When desiring both the QZ Lubricator and a grease nipple to be attached, contact THK. With "ZZ" and "KK" types of model HSR15, a grease nipple is not available. Contact THK for details.

15 Side scraper separator Side Scraper Side scraper case Side scraper End plate LaCS LM block QZ Lubricator End seal Intermediate plate Metal scraper Schematic of side scraper installation (this example shows QZZZHHYY type) Features Minimizes the entry of foreign material from the side face of the LM Guide in a harsh environment. Provides a dust prevention effect in an inverted or wallmount orientation. Route of the entry of foreign material into the LM block's side face Foreign material Foreign material Foreign material Height of the shoulder of the mounting surface and the corner radius after a side scraper is mounted Inverted Wall mount Side face of the LM block Grease nipple mounting position Grease nipple H LaCS End plate K Reference surface SNR/SNS Corner radius r Shoulder height for the LM rail E Table of Incremental Dimension of a Grease Nipple when Side Scraper is Attached LR/LC LR/LC LR/LC/LRH/LCH SNR/SNS LR/LC/LRH/LCH LR/LC/LRH/LCH LR/LC/LRH/LCH Incremental dimension with grease nipple H Nipple type A-PT1/8 Example of model number coding SNR LR 1 QZ ZZHH YY C1 +10L With Side Scraper attached Note 1: The side scraper is not sold alone. Note 2: The side scraper can be attached with other various options including dust control parts and lubrication parts. Contact THK for details.

16 Light Sliding Resistance Contact Seal LiCS LiCS LiCS LiCS is a contact seal with a low sliding resistance. It is effective in removing dust and the like from the raceway and retaining a lubricant such as grease. With its very low sliding resistance, LiCS achieves a smooth and stable motion. Features Light Sliding Resistance Contact Seal LiCS is a contact seal that uses a low sliding resistance material for the seal and contacts with the LM rail raceway. It is optimal for locations requiring a low sliding resistance such as semiconductorrelated machines, inspection machines and OA equipment, which are used in favorable service conditions. Effective in removing dust or the like adhering to the LM rail raceway with a seal that contacts the raceway. Use of oil-impregnated, foamed synthetic rubber, which is high selflubricating, achieves a low sliding resistance. LiCS model SSR is attached with a grease nipple as standard. For the mounting location of the grease nipple and the incremental dimension with the grease nipple attached, see page 16. LiCS models include types that also support other Caged Ball LM Guide models such as SHS. Contact THK for details. Basic Specifications of LiCS Service temperature range: - to +80 Resistance of LiCS: For seal resistance of LiCS, see the table below. Maximum Seal Resistance of LiCS 15X X SSR X X X SRG 15X Resistance Unit: N Note: Each value represents the sliding resistance of 2 LiCS units per LM block, one unit on each end, and excludes the sliding resistance of the block and any other seals. Note: LiCS is not sold alone.

17 Table of Incremental Dimension of a Grease Nipple when LiCS is Attached Overall LM block length with LiCS attached (Standard LM block length) SSR SRG 15XVY 15XWY/XTBY XV XW/XTB XVY XWY/XTBY XW XW 15A 15V Standard LM block length GG L PP Table of Incremental Dimension of a Grease Nipple when LiCS is Attached Grease nipple Grease nipple LiCS End plate LiCS End plate Reference surface Grease-nipple mounting position for model SSR Grease-nipple mounting position for model SRG Incremental dimension with grease nipple Nipple type SSR SRG 15XVY 15XWY/XTBY XV XW/XTB XVY XWY/XTBY XW XW 15A 15V Since this model is a flanged type, the grease nipple does not protrude from the block end face. Example of model number coding SSR XW 2 GG C1 +600L P - Type of LM block With LiCS attached LM rail length (in mm) Number of rails used on the same plane Number of LM blocks on the same rail Symbol for radial clearance Normal (no symbol), light preload (C1), medium preload (C0) Accuracy symbol Normal grade (no symbol), high grade (H), precision grade (P), super precision grade (SP), ultra-super precision grade (UP) This model number indicates that a single-rail unit constitutes one set (i.e., required number of sets when 2 rails are used in parallel is 2 at a minimum).

18 Metal Cap Dedicated for LM Rail Mounting Holes GC Cap GC Cap LM rail GC Cap LM rail Magnified view LM rail mounting bolt GC cap is a metallic cap that plugs the LM rail mounting hole (article compliant with the RoHS Directives). It prevents the entrance of foreign material and coolant from the LM rail top face (mounting hole) under harsh environments, and significantly increases the dust control performance of the LM Guide if used with a dust control seal. Features Eliminates the clearance between the mounting hole (counterbore hole) and itself Since GC Cap is driven into a mounting hole (counterbore hole), it does not leave a clearance. Eliminates the clearance Mounting method To insert GC cap into a mounting hole, use a flat metal piece like the one shown in the figure, and gradually drive the metal cap until its top is on the same level as the LM rail top face. When inserting GC cap, do not remove the LM block from the LM rail. Demonstrates a sealing effect over a long period due to superb resistance to wear If a dust control seal or the like passes over the top face of the LM rail to which foreign material adheres, a downward force from the top of GC cap is generated. Since the metal cap has a sufficient retention, it does not sink even in such a case. Dust control seal passes Dust control seal Adherence of foreign material Does not sink

19 Dimensional table Applicable models GC Cap supports various models. Outer diameter D Thickness H GC GC GC GC GC GC GC GC GC GC5 GC6 GC8 GC10 GC12 GC14 GC16 GC22 GC24 LM rail mounting bolt M5 M6 M8 M10 M12 M14 M16 M22 M24 SSR Y SR Y 70 1 SNR SNS NR NRS X SHS HSR HCR 100 LM Guide model number SCR CSR SHW HRW SRG SRN 100 SRW GSR HR NSR- TBC GC cap is capable of demonstrating a substantial effect under various environments. Adverse environment Service environment Amount of foreign material - small Amount of foreign material - large Metallic powder, spatter Wood dust, coolant (environment where oil is lost) Metallic powder + coolant Metallic powder, spatter Wood dust, coolant (environment where oil is lost) Metallic powder + coolant LM Guide Attached with standard C cap Attached with GC cap Use example If designating an LM Guide model attached with GC cap, observe the following example of model number coding. Example of model number coding Welding machine, robot Woodworking machine, washing machine Lathe, machining center Welding machine, robot Woodworking machine, washing machine Lathe, machining center very effective effective less effective SNR LR 2 QZ KKHH C0 + 10L P -GC Model number Type of LM block With QZ Lubricator Number of LM blocks per rail Dust control option symbol LM rail length (in mm) With GC cap (see Note 7) Symbol of number of rails used on the same plane (see Note 7) Radial clearance symbol Accuracy symbol Normal (no symbol)/light preload (C1) Normal grade (no symbol) / high-accuracy grade (H) / precision grade (P) Medium preload (C0) Super precision grade (SP) / ultra-precision grade (UP) Note 1: The LM rail of an LM Guide model attached with GC cap is of special type. Note 2: GC cap cannot be mounted on an LM rail made of stainless steel or provided with surface treatment. Note 3: If using the product in a special environment such as vacuum, low temperature or high temperature, contact THK. Note 4: GC cap is not sold alone. It is always provided in combination with LM Guide. Note 5: The mouth of the LM rail mounting hole is not chamfered. Take care not to hurt your hand when attaching GC cap. Note 6: After attaching GC cap, be sure to level and clean (wipe off) the tope face of the LM rail. Note 7: If you desire a one-rail LM Guide model attached with GC cap, apply the following example of model number coding. Example:SNRLR2QZKKHHC0+10LPGC With GC cap * Add the symbol GC at the end of the model number.

20 Handling Precautions on Use QZ Lubricator for the LM Guide Dropping or hitting this product may damage it. Take much care when handling it. Do not block the air vent with grease or the like (see page 5). Service environment The service temperature range for this product is between -10 and +50. Do not clean the product with an organic solvent or white kerosene, or do not leave the product unpacked. When desiring to use the product out of the service temperature range, contact THK in advance. Use in a special environment When desiring to use the product in a special environment, contact THK in advance. Precaution on selection The stroke must be equal to or longer than the overall LM block length with QZ Lubricator attached. Rust prevention of the LM Guide QZ Lubricator is a device designed to feed the required minimum amount of lubricant to the raceway, and therefore it does not have a dust-prevention effect on the whole LM Guide. When using it in an adverse environment subject to a coolant or the like, we recommend applying grease or the like to the mounting base surface and the rail ends of the LM Guide as an anticorrosive measure. Laminated Contact Scraper LaCS and Side Scraper for the LM Guide Service environment The service temperature range is between - and +80. Do not clean the product with an organic solvent or white kerosene, or do not leave the product unpacked. Impregnating oil The purpose of the lubricant impregnated in the scraper is to increase the slidability of the scraper. For lubrication of the LM Guide, attach a grease nipple on the end plate side face of QZ Lubricator or the LM block before feeding oil. Functions Although these products have a dust prevention ability to remove foreign material and liquids, they require an end seal to seal grease and oil. Design When using these products, be sure to use the rail cap GC and a plate cover. Light Sliding Resistance Contact Seal LiCS for the LM Guide Service environment Options for the LM Guide The service temperature range is between - and +80. Do not clean the product with an organic solvent or white kerosene, or do not leave the product unpacked. Since the product contacts the LM rail raceway only, do not use it in a harsh environment. Impregnating oil The purpose of the lubricant impregnated in LiCS is to increase the slidability of the seal. For lubrication of the LM Guide, attach a grease nipple on the end plate of the LM block before feeding oil. GC Cap Handling If you selected the GC Cap, take much care not to hurt your finger or hand when attaching the metal cap to the LM system since the mouth of the LM rail mounting hole is sharp. When attaching the GC Cap, gradually drive the metal cap from the top surface of the LM rail using a flat metal piece until the metal cap top is on the same level as the top surface of the rail, and then smooth out the top surfaces of the rail and the GC Cap using sandpaper, oil stone or the like so that the surfaces become even, before using the product. LM GUIDE,, and, are registered trademarks of THK CO., LTD. The photo may differ slightly in appearance from the actual product. The appearance and specifications of the product are subject to change without notice. Contact THK before placing an order. Although great care has been taken in the production of this catalog, THK will not take any responsibility for damage resulting from typographical errors or omissions. For the export of our products or technologies and for the sale for exports, THK in principle complies with the foreign exchange law and the Foreign Exchange and Foreign Trade Control Law as well as other relevant laws. All rights reserved For export of THK products as single items, contact THK in advance. NORTH AMERICA THK America,Inc. HEADQUARTERS Phone: Fax: CHICAGO OFFICE Phone: Fax: NEW YORK OFFICE Phone: Fax: ATLANTA OFFICE Phone: Fax: LOS ANGELES OFFICE Phone: Fax: SAN FRANCISCO OFFICE Phone: Fax: BOSTON OFFICE Phone: Fax: DETROIT OFFICE Phone: Fax: TORONTO OFFICE Phone: Fax: SOUTH AMERICA THK Brasil LTDA Phone: Fax: EUROPE THK GmbH EUROPEAN HEADQUARTERS Phone: Fax: DÜSSELDORF OFFICE Phone: Fax: HEAD OFFICE , NISHI-GOTANDA, SHINAGAWA-KU, TOKYO -03 JAPAN INTERNATIONAL SALES DEPARTMENT PHONE: FAX: Global site : FRANKFURT OFFICE Phone: Fax: STUTTGART OFFICE Phone: Fax: MÜNCHEN OFFICE Phone: Fax: U.K. OFFICE Phone: Fax: ITALY MILANO OFFICE Phone: Fax: ITALY BOLOGNA OFFICE Phone: Fax: SWEDEN OFFICE Phone: Fax: AUSTRIA OFFICE Phone: Fax: SPAIN OFFICE Phone: Fax: TURKEY OFFICE Phone: Fax: PRAGUE OFFICE Phone: Fax: THK Europe B.V. EINDHOVEN OFFICE Phone: Fax: THK France S.A.S. Phone: Fax: CHINA THK (CHINA) CO.,LTD. HEADQUARTERS Phone: Fax: SHANGHAI OFFICE Phone: Fax: BEIJING OFFICE Phone: Fax: CHENGDU OFFICE Phone: Fax: GUANGZHOU OFFICE Phone: Fax: THK (SHANGHAI) CO.,LTD. Phone: Fax: TAIWAN THK TAIWAN CO.,LTD. TAIPEI HEAD OFFICE Phone: Fax: TAICHUNG OFFICE Phone: Fax: TAINAN OFFICE Phone: Fax: KOREA SEOUL REPRESENTATIVE OFFICE Phone: Fax: SINGAPORE THK LM SYSTEM Pte. Ltd. Phone: Fax: INDIA BANGALORE REPRESENTATIVE OFFICE Phone: Fax: THK CO., LTD E7 Printed in Japan

Contamination Protection Accessories

Contamination Protection Accessories For the supported models, see the table of options by model number on. For the M block dimension with QZ attached, see to. For notes regarding how to handle the QZ, see. feeds the right amount of lubricant

More information

Options for the Ball Screw QZ Lubricator Wiper Ring W

Options for the Ball Screw QZ Lubricator Wiper Ring W Options for the Ball Screw Lubricator Wiper Ring W CATALOG No.322-1E OPTIONS For Ball Screws, dust-prevention and lubrication accessories are available. You can make a selection according to the application

More information

Guide Ball Bushing NEW

Guide Ball Bushing NEW NEW Guide Ball Bushing Contributes to compact the system Achieves load rating more than twice the Linear Bushing with the same dimensions (model LG-S) Various combinations of nut and shaft are available

More information

Wide Caged-roller LM Guide

Wide Caged-roller LM Guide NEW Wide Caged-roller LM Guide Optimal for large machines that require high rigidity and mounting accuracy Ultra-high rigidity, heavy load A wide, large roller guide model is added to the lineup CATALOG

More information

Smooth Silent Ecological

Smooth Silent Ecological Technical Reference Roller Smooth Silent Ecological Accessories for Long-Term, Maintenance-Free Operation Optimum Lubrication and Dust Prevention Options for Various Applications For details, visit THK

More information

SRW NEW. Wide Type Roller Guide with Caged Technology

SRW NEW. Wide Type Roller Guide with Caged Technology NEW Roller Wide Type Roller Guide with Caged Technology Ultra-High Rigidity, Heavy Load Low Friction Long Service Life, Long-Term Maintenance-Free Operation SRW This catalog uses recycled paper. CATALOG

More information

SBK. High-Speed Caged Ball Screw Model SBK NEW. Achieves high-speed feed at 114 m/min With model SBK4030

SBK. High-Speed Caged Ball Screw Model SBK NEW. Achieves high-speed feed at 114 m/min With model SBK4030 NEW High-Speed Caged Ball Screw Model SBK Low noise, long-term maintenance-free operation High speed, high accuracy SBK DN value: 160,000 Achieves high-speed feed at 114 m/min With model SBK4030 For details,

More information

Caged Ball LM Guide SPR / SPS

Caged Ball LM Guide SPR / SPS Caged Ball LM Guide SPR / SPS Adopts 8 Rows of Raceways Achieves Super-Low Waving and Ultra-High Rigidity For details, visit THK at www.thk.com Product information is updated regularly on the THK website.

More information

1.1. Types of Lubricants Grease Lubrication Oil Lubrication

1.1. Types of Lubricants Grease Lubrication Oil Lubrication a-2 a-2 a 3 a-3 a-4 a 5 a-5 19.6 MPa max 0.6 cc/stroke 70-g bellows cartridge 235 mm (excluding the nozzle) 480 g (including the nozzle; excluding grease) a-6 a 7 a-7 LF-A (PT1/8) L=20, L1=, F=2, C=, D=

More information

Caged Ball LM Guide. Ball Cage Effect Wide, Low Center of Gravity Type SHW. CATALOG No.248-5E

Caged Ball LM Guide. Ball Cage Effect Wide, Low Center of Gravity Type SHW. CATALOG No.248-5E Caged Ball LM Guide Ball Cage Effect Wide, Low Center of Gravity Type SHW CATALOG No.248-E Ball Cage Effect The early forms of ball bearings were full-ball types without ball cages. Friction between balls

More information

Roller Compliant with New Accuracy Standards Caged Roller LM Guide Roller Cage Effect Ultra-super-high SRG/SRN Rigidity

Roller Compliant with New Accuracy Standards Caged Roller LM Guide Roller Cage Effect Ultra-super-high SRG/SRN Rigidity Compliant with New Accuracy Standards Roller Roller Caged Roller LM Guide Roller Cage Effect Ultra-super-high Rigidity SRG/SRN For details, visit THK at www.thk.com Product information is updated regularly

More information

SHS. Caged Ball LM Guide. Ball Cage Effect Global Standard Size. BERG AB Тел. (495) , ф.

SHS. Caged Ball LM Guide. Ball Cage Effect Global Standard Size.   BERG AB Тел. (495) , ф. www.thk.ru BERG AB thk@thk.ru Тел. (49)-727-22-72, ф. (49)-22-71 Caged Ball LM Guide Ball Cage Effect Global Standard Size SHS CATALOG No.2-1E www.thk.ru BERG AB thk@thk.ru Тел. (49)-727-22-72, ф. (49)-22-71

More information

Caged Roller LM Guide

Caged Roller LM Guide Caged Roller LM Guide SRG/SRN Ultra-high Rigidity Long-term Maintenance-free Operation Smooth Motion Wide Array of Options For details, visit THK at www.thk.com Product information is updated regularly

More information

Roller. Roller. Caged Roller LM Guide. Roller Cage Effect Ultra-super-high Rigidity SRG/SRN. CATALOG No.270-7E

Roller. Roller. Caged Roller LM Guide. Roller Cage Effect Ultra-super-high Rigidity SRG/SRN. CATALOG No.270-7E Roller Roller Caged Roller LM Guide Roller Cage Effect Ultra-super-high Rigidity SRG/SRN CATALOG No.2-E Roller Cage Effect According to the history of rotary ball bearings, which used balls as the rolling

More information

511E. LM Guide General Catalog

511E. LM Guide General Catalog General Catalog A Classification Table of the s Ball Guide Caged Ball Type Full-ball Type Standard Type Standard Type Model SHS Global Standard Size Model SSR Radial Model HSR 4-way Equal Load Model SR

More information

SRG. CATALOG No.270-4E

SRG. CATALOG No.270-4E Roller SRG CATALOG No.27-4E LM Guide with Caged Roller TechnologySRG LM rail LM block End seal End plate Pipe Retaining plate Caged Roller Roller cage Roller Caged roller retaining plates 45 45 Enlarged

More information

Caged Ball LM Guide Global Standard Type LM Guide Model SHS Structure and Features 4-way equal load Self-adjustment capability Global standard size

Caged Ball LM Guide Global Standard Type LM Guide Model SHS Structure and Features 4-way equal load Self-adjustment capability Global standard size a-14 a 15 a-15 a-1 a 17 a-17 UU SS DD ZZ KK SSHH DDHH ZZHH KKHH Model No. Seal resistance value SHS 15 4.5 SHS 20 7.0 SHS 25 10.5 SHS 0 17.0 SHS 5 20.5 SHS 45 0.0 SHS 55 1.5 SHS 5 4.0 a-1 5 75 0 97 105

More information

LM Guide Ultra-heavy-load, High-rigidity LM Guide Models NR and NRS Structure and Features Improved damping capacity Highly rational LM Guide

LM Guide Ultra-heavy-load, High-rigidity LM Guide Models NR and NRS Structure and Features Improved damping capacity Highly rational LM Guide a-0 a 1 a-1 a-2 a 3 R a-3 C CL=0.8C CT=0.48C C0 C0L=0.1C0 C0T=0.45C0 1.0 2 0.5 1 a-4 UU SS DD ZZ KK SSHH DDHH ZZHH KKHH a 5 15 1 23 24 29 42 42 42 51 a-5 48 0 86 100 126 145 156.5 31 35 40.5 49 5.5 64

More information

VLA. CATALOG No.320-4E

VLA. CATALOG No.320-4E VLA CATALOG No.320-4E Low Price Actua Two types of actuator are available. Actuator Model VLA is offered in two types. You can select either type according to your service conditions. Slider Type: Model

More information

Precision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327-1E

Precision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327-1E Precision Ball Screw/Spline Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS CATALOG No.7-1E Contents Rotary-Nut Series Precision Ball Screw/Spline BNS/NS Japanese patent No. 7 (model NS), 77 (model

More information

Compact Caged Ball Screw SDA

Compact Caged Ball Screw SDA NEW Compact Caged Ball Screw SDA Contributes to downsizing the equipment and lowering the center of gravity Capable of operating at high speed 5000 min -1 (max DN value: 130,000) Achieves a slim nut with

More information

Smooth Silent Ecological

Smooth Silent Ecological Technical Reference Smooth Silent Ecological Caged Technology For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.268-6E 2 Introduction Caged Technology

More information

High-Speed Ball Screw with Ball Cage. Low noise Long-term, maintenance free operation Low torque fluctuation DN value 130,000 SBN. CATALOG No.

High-Speed Ball Screw with Ball Cage. Low noise Long-term, maintenance free operation Low torque fluctuation DN value 130,000 SBN. CATALOG No. High-Speed Ball Screw with Ball Cage Low noise Long-term, maintenance free operation Low torque fluctuation DN value 130,000 SBN CATALOG No.273-2E High speed ball screw with caged ball technology SBN Pipe

More information

HBN. Caged-Ball High-Load Ball Screw. High load capacity. High speed Low torque fluctuation Low noise and long-term maintenance-free operation

HBN. Caged-Ball High-Load Ball Screw. High load capacity. High speed Low torque fluctuation Low noise and long-term maintenance-free operation Caged-Ball High-Load Ball Screw High load capacity HBN High speed Low torque fluctuation Low noise and long-term maintenance-free operation CATALOG No.296-2E Allows a machine used in high-load range to

More information

LM Guide Structural Member Rail Four-way Equal Load Type

LM Guide Structural Member Rail Four-way Equal Load Type LM Guide Structural Member Rail Four-way Equal Load Type JR CATALOG No.137-5E Structural Member Rail, Four-way Equal Load Type LM Guide JR Upper plate LM rail LM block Endplate End seal Grease nipple Side

More information

Precision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327E

Precision Ball Screw/Spline. Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS. CATALOG No.327E Precision Ball Screw/Spline Rotary-Nut Series Linear Motion + Rotary Motion BNS/NS CATALOG No.7E Contents Rotary-Nut Series Precision Ball Screw/Spline BNS/NS Japanese patent No. 7 (model NS), 77 (model

More information

NEW LM Actuator. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure

NEW LM Actuator. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure NEW LM Actuator Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure TY For details, visit THK at www.thk.com Product information is

More information

Double-Nut Caged Ball Screw

Double-Nut Caged Ball Screw Double-Nut Caged Ball Screw SBKN The basic dynamic load rating is 1.8 times larger than comparable models. Achieves long service life. DN value of 160,000. Supports high-speed operation. Low noise and

More information

4mm(H)x8mm(W) Micro LM Guides

4mm(H)x8mm(W) Micro LM Guides 4mm(H)x8mm(W) Micro LM Guides US, EPC, Patent Pending CATALOG No.293E Micro LM Guides RSR3M/3N The micro size allows space-saving design. Can be used in various fields of industry including micro machines

More information

NEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure

NEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure NEW LM Actuator Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure TY US Only For details, visit THK at www.thk.com Product information

More information

Cost Effective Screw series

Cost Effective Screw series Cost Effective Screw series Ball Screws Compliant with the New Accuracy Standards New Series CES (Pronounced sees ) Simple-Nut Type BIF Double-Nut Type BNFN (build to order) Single-Nut Type BNF (build

More information

SVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No.

SVR/SVS. Caged Ball LM Guide Ultra-heavy Load Type for Machine Tools Model SVR/SVS. Point of Selection. Point of Design. Options. Model No. Caged Ball Guide Ultra-heavy Load Type for Machine Tools Model Protector 90 rail Ball cage Radial type model SVR Cross section 40 50 Ball * For the Ball Cage, see A. 4-Way Type Model SVS Cross section

More information

KR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.

KR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No. LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide

More information

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SRG. Caged Roller LM Guide Ultra-high Rigidity Type Model SRG. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Roller LM Guide Ultra-high Rigidity Type Model LM block LM rail End seal Endplate 45 45 Caged roller Roller 45 Cross section 45 * or the caged roller, see. Point of Selection A Point of Design Options

More information

SBN. High speed ball screw with caged ball technology NEW. Caged Ball Technology. High speed specification

SBN. High speed ball screw with caged ball technology NEW. Caged Ball Technology. High speed specification NEW High speed ball screw with caged ball technology SBN Caged Ball Technology + High speed specification Low noise Long-term, maintenance free operation Low torque fluctuation DN value 130,000 CATALOG

More information

Low Price Actuator VLA

Low Price Actuator VLA Low Price Actuator VLA For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.320-7E Low Price Actu Two types of actuator are available. Actuator

More information

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives

CRES. RoD Actuator. Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant with the RoHS Directives CRES07_3.3_OCF 13.4.19 11:33 ページ 2 www.thk.ru BERG AB тел. (495) 727-22-72 thk-mail@ya.ru RoD Actuator CRES Low-cost and handy actuator Dustproof and waterproof design compliant with IP55 standard Compliant

More information

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SHS. Caged Ball LM Guide Global Standard Size Model SHS. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Global Standard Size Model LM block LM rail Endplate End seal 45 Ball Ball cage Cross section 45 * For the Ball Cage, see. Point of Selection Point of Design Options Model No. Precautions

More information

Miniature LM Guide Actuators Featuring Caged Ball Technology

Miniature LM Guide Actuators Featuring Caged Ball Technology Miniature LM Guide Actuators Featuring Caged all Technology Caged all Technology Offers Long life and long-term, maintenance-free operation Excellent high speed performance Excellent Sliding Smooth Motion

More information

Тел. (495) Miniature LM Guide Actuators Featuring Caged Ball Technology

Тел. (495) Miniature LM Guide Actuators Featuring Caged Ball Technology Miniature LM Guide Actuators Featuring Caged all Technology Caged all Technology Offers Long life and long-term, maintenance-free operation Excellent high speed performance Excellent Sliding Smooth Motion

More information

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SSR. Caged Ball LM Guide Radial Type Model SSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball LM Guide Radial Type Model Endplate LM block End seal LM 90 30 Ball Ball cage Cross section * For the Ball Cage, see A. Point of Selection A Point of Design Options Precautions on Use Accessories

More information

BERG AB Тел. (495) , ф. (495)

BERG AB Тел. (495) , ф. (495) www.thk.ru BERG AB thk@thk.ru Тел. (495)-727-22-72, ф. (495)-223-371 Advantages of Caged BallTM Technology High speed performance Low noise design, Long service life, Long-term maintenance-free operation

More information

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR. LM Guide Global Standard Size Model HSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Global Standard Size Model Retainer plate Endplate End seal Grease nipple Ball Retainer plate Inner seal (Optional) Side seal LM rail Cross section 45 45 Point of Selection A Point of Design Options

More information

SNR/SNS. Advantages of Caged Ball Technology. Revised basic dynamic load ratings

SNR/SNS. Advantages of Caged Ball Technology. Revised basic dynamic load ratings Advantages of aged Ball Technology High speed performance Low noise design, Long service life Long-term maintenance-free operation Reduction in rolling resistance variation SNR/SNS Revised basic dynamic

More information

NEW. Adopts 8 Rows of Raceways Achieves Super-Low Waving and Ultra-High Rigidity. Added Model No. For details, visit THK at

NEW. Adopts 8 Rows of Raceways Achieves Super-Low Waving and Ultra-High Rigidity. Added Model No. For details, visit THK at Added Model No. NEW Adopts 8 Rows of Raceways Achieves Super-Low Waving and Ultra-High Rigidity For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG

More information

NSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use

NSR-TBC. LM Guide Self-aligning Type Model NSR-TBC. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Self-aligning Type Model LM casing Spline nut End seal LM rail Grease nipple Side plate Clearance adjustment bolt 90 Side seal (Optional) Ball Retainer Cross section 30 Point of Selection A Point

More information

GL-N LM ACTUATOR. US Only Quick Delivery. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw

GL-N LM ACTUATOR. US Only Quick Delivery. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw LM ACTUATOR Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw GL-N US Only Quick Delivery * Standard options only. Please refer to list in page 7. TOKYO. JAPAN CATALOG No.78E LM Actuator

More information

Specifi cation Table. SSR-XW A 14.7 to to SSR-XV A 9.1 to to SSR-XTB A 14.7 to to 36.4

Specifi cation Table. SSR-XW A 14.7 to to SSR-XV A 9.1 to to SSR-XTB A 14.7 to to 36.4 Types of s THK offers a wide array of types and dimensions with s as standard so that you can select the optimal product for any application. With the unit structure of each model, you can easily obtain

More information

GL-N. LM Actuator. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw. For details, visit THK at CATALOG No.

GL-N. LM Actuator. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw. For details, visit THK at  CATALOG No. LM Actuator Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw GL-N For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.77-3E

More information

GL-N. LM ACTUATOR Long-term Maintenance-free Type NEW. Quick Delivery. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw

GL-N. LM ACTUATOR Long-term Maintenance-free Type NEW. Quick Delivery. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw NEW LM ACTUATOR Long-term Maintenance-free Type Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw GL-N * Quick Delivery Standard options only. Please refer to list in page 7. Catalog

More information

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1. LM Guide High Temperature Type Model HSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide High Temperature Type Model Endplate SUS304 End seal (High temperature rubber material) LM THK-EX50 Ball SUS440C Side seal (High temperature rubber material) LM rail THK-EX50 Cross section 45

More information

LM Actuator GL. Low Cost Simple Actuator LM Assembly Kit Also Available NEW. BERG AB Тел. (495) , ф.

LM Actuator GL. Low Cost Simple Actuator LM Assembly Kit Also Available NEW.  BERG AB Тел. (495) , ф. www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72, ф. (9)-223-3071 NEW LM Actuator GL Low Cost Simple Actuator LM Assembly Kit Also Available CATALOG No. 17-E www.thk.ru BERG AB thk@thk.ru Тел. (9)-727-22-72,

More information

511E. LM Guide Features and Dimensions of Each Model

511E. LM Guide Features and Dimensions of Each Model LM block LM rail Endplate End seal Ball Ball cage Fig.1 Structural Drawing of the Caged Ball Model SHS Endplate (Turn-around section) Unloaded ball circulation path Ball Ball cage Loaded raceway area of

More information

Precision Linear Pack

Precision Linear Pack Precision Linear Pack General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features... Features of the Precision Linear Pack... Structure and features... Rated Load

More information

High-Speed Caged Ball Screw

High-Speed Caged Ball Screw High-Speed Caged Ball Screw SBK DN value: 210,000 (Achieves high-speed feed at 200 m/min) High-Speed feed by a large lead Low noise, long-term maintenance-free operation For details, visit THK at www.thk.com

More information

RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use

RSR-M1. LM Guide High Temperature Type Model RSR-M1. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide High Temperature Type Model Endplate SUS34 LM block THK EX5 End seal (High temperature rubber) LM rail THK EX5 Ball SUS44C Grease nipple SUS34 Point of Selection A Point of Design Options Model

More information

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at CATALOG No.

LM Guide HCR/HMG. R Guide / Straight-Curved Guide Achieving a Simplified Mechanism. For details, visit THK at  CATALOG No. LM Guide HCR/HMG R Guide / Straight-Curved Guide Achieving a Simplified Mechanism For details, visit THK at www.thk.com Product information is updated regularly on the THK website., CATALOG No.306-8E HCR

More information

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use

RSR. LM Guide Miniature Types Model RSR. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Miniature Types Model Endplate LM block End seal LM rail Ball Grease nipple Cross section Point of Selection A Point of Design Options Model No. Precautions on Use Accessories for Lubrication

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

NEW Press series PCT/PC. For details, visit THK at Product information is updated regularly on the THK website. CATALOG No.

NEW Press series PCT/PC. For details, visit THK at  Product information is updated regularly on the THK website. CATALOG No. NEW PCT/PC For details, visit THK at www.thk.com Product information is updated regularly on the THK website., CATALOG No.379-5E ELECTRIC ACTUATORS Electrical Actuator Press Series PCT Cylinder-type Actuator

More information

HSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA

HSR(Ct Grade) Cost effective Type (Ct Grade) of LM Guide Debuts STOCK DISPONIBLE ENTREGA INMEDIATA Cost effective Type (Ct Grade) of L Guide Debuts A cost effective series of the well-established model HSR has been newly added. Optimal for the general linear guide market such as for conveyance systems!

More information

2-9 RG Series High Rigidity Roller Type Linear Guideway

2-9 RG Series High Rigidity Roller Type Linear Guideway G99TE17-136 2-9 High Rigidity Roller Type Linear Guideway 2-9-1 Advantages and features The new RG series from Hiwin features a roller as the rolling element instead of steel balls. The roller series offers

More information

LM Guide Radial Type Model SR

LM Guide Radial Type Model SR LM Guide Radial Type Model Endplate LM block Grease nipple End seal LM rail 90 Ball Retainer plate Side seal (Optional) Cross section 30 Point of Selection A Point of Design Options Model No. Precautions

More information

Linear Guideways HG Series

Linear Guideways HG Series 18 G99TE1-67 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

Accessories for Lubrication

Accessories for Lubrication Accessories for Lubrication General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Lubrication... Types of Lubricants... Grease Lubrication... Oil Lubrication... Lubrication

More information

NEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure

NEW LM Actuator. US Only. Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure NEW LM Actuator Optimal for high speed and long stroke Long term maintenance-free operation is actualized Lightweight, compact structure TY US Only CATALOG No.352E Structure of Model TY This belt drive

More information

NEW. Low Cost Actuator VLA. Electrical/Motion Cylinder. CATALOG No.304-6E

NEW. Low Cost Actuator VLA. Electrical/Motion Cylinder. CATALOG No.304-6E NEW Low Cost Actuator Electrical/Motion Cylinder VLA CATALOG No.304-6E Low Cost VLA Actuator assembly types Choose from two assembly designs. VLA-ST Slider Type Stainless Sheet Cover Slider AC Servomotor

More information

HSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use

HSR-M1VV. LM Guide Medium-to-low Vacuum Type Model HSR-M1VV. Point of Selection. Point of Design. Options. Model No. Precautions on Use LM Guide Medium-to-low Vacuum Type Model LM block: THK-EX50 (martensitic stainless steel) End plate: SUS304 Labyrinth end seal dedicated for Medium-to-Low Vacuum: SUS304 Upper plate: SUS316L LM rail: THK-EX50

More information

Cross Roller Guide/Ball Guide General Catalog

Cross Roller Guide/Ball Guide General Catalog General Catalog A Product Descriptions Features and Types... A7-2 Features of the.. A7-2 Structure and Features... A7-2 Types of the.. A7-3 Types and Features... A7-3 Point of Selection... A7-4 Rated Load

More information

Features of the LM Guide

Features of the LM Guide Features of the Functions Required for Linear Guide Surface Large permissible load Highly rigid in all directions High positioning repeatability Running accuracy can be obtained easily High accuracy can

More information

GL-N. LM Actuator. US Only Quick Delivery. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw. For details, visit THK at

GL-N. LM Actuator. US Only Quick Delivery. Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw. For details, visit THK at LM Actuator Equipped with Caged Ball LM Guides and QZ Lubricator for Ball Screw GL-N US Only Quick Delivery * Standard options only. Please refer to list in page. For details, visit THK at www.thk.com

More information

12.5 Ball Chain Type, SME Series

12.5 Ball Chain Type, SME Series 12.5 Ball Chain Type, SME Series A. Construction Carriage End Cap End Seal Grease Nipple Inner Seal Ball Bottom Seal Ball Chain 45 Rail 45 B. Characteristics The ball chain type linear guideway, SME series,

More information

Instruction Manual for the LM Guide

Instruction Manual for the LM Guide Instruction Manual for the LM Guide 1 Table of Contents 1.Introduction 1 2.Precautions on Using the LM Guide 2 1.Introduction Thank you for purchasing the THK products. This document will explain any precautions

More information

Features of the Slide Pack

Features of the Slide Pack BER AB тел. (495) 727-22-72 thk-mail@ya.ru Features and Types Features of the Mounting plate Ball Ball case Slide rail Seal uide plate Stopper Slider Structure and Features Fig.1 Structure of Model FBW-RUU

More information

506E. LM Guide Actuator General Catalog

506E. LM Guide Actuator General Catalog LM Guide Actuator General Catalog A LM Guide Actuator General Catalog A Product Descriptions 506E Caged Ball LM Guide Actuator Model SKR.. A2-4 Structure and Features... A2-4 Caged Ball Technology... A2-6

More information

General Description. General Catalog A-1. A Technical Descriptions of the Products

General Description. General Catalog A-1. A Technical Descriptions of the Products General Description General Catalog A Technical Descriptions of the Products Point of Selection... Selection Flow Chart... Types and Features of LM Systems. Load Rating... Service Life of an LM System...

More information

2-1 HG Series - Heavy Load Ball Type Linear Guideway

2-1 HG Series - Heavy Load Ball Type Linear Guideway 2 G99TE15-114 Linear Guideways 2-1 - Heavy Load Ball Type Linear Guideway HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove

More information

Bearings for the Cement and Ready-Mix Concrete Industries

Bearings for the Cement and Ready-Mix Concrete Industries Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to

More information

12.3 Full Roller Type, MSR Series

12.3 Full Roller Type, MSR Series 12.3 Full Roller Type, MSR Series A. Construction Carriage End Seal Grease Nipple End Cap Inner Seal Roller Bottom Seal 45 Rail 45 B. Characteristics The full roller type linear guideway, MSR series, equip

More information

NSK Linear Guides. Roller Guide RA Series. Extended series

NSK Linear Guides. Roller Guide RA Series. Extended series NSK Linear Guides A roller guide series employing advanced analysis technology offers super-high load capacity and rigidity. The RA series includes a complete lineup to handle a wide range of applications.

More information

Spherical Roller Bearings

Spherical Roller Bearings Spherical Roller Bearings Introducing the newest series of advanced, high performing spherical roller bearings offering higher speed and load capacities suitable for a wide variety of industrial applications.

More information

SRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use

SRS. Caged Ball LM Guide Miniature Type Model SRS. Point of Selection. Point of Design. Options. Model No. Precautions on Use Caged Ball M Guide Miniature Type Model M rail Endplate End seal M block Compact type Model -M Ball Side seal Ball cage Wide type Model -WM * or the ball cage, see A. Point of Selection A Point of Design

More information

Linear Bushing General Catalog

Linear Bushing General Catalog General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the... Structure and features... Dedicated Shafts for Model LM... Standard

More information

Lubrication Unit NSK K1 TM Used on NSK Linear Guides, Ball Screws and Monocarriers

Lubrication Unit NSK K1 TM Used on NSK Linear Guides, Ball Screws and Monocarriers Lubrication Unit TM Used on NSK Linear Guides, Ball Screws and Monocarriers First in the world Fifteen years of proven efficiency in providing lubrication NSK Patent Lubrication unit TM for food processing

More information

UGR A compact slide rail with a large permissible load.

UGR A compact slide rail with a large permissible load. Utility Slide UGR A compact slide rail with a large permissible load. It can easily be installed, and is optimal for linear motion guides of household and offi ce equipments. TOKYO. JAPAN CATALOG No.C-02E

More information

Linear Guideways QH Series

Linear Guideways QH Series G99TE17-136 2-6 Quiet Linear Guideway, with SynchMotion TM Technology The development of HIWIN-QH linear guideway is based on a four-row circular-arc contact. The HIWIN-QH series linear guideway with SynchMotion

More information

Accessories for Lubrication General Catalog

Accessories for Lubrication General Catalog General Catalog A Product Descriptions Lubrication... A24-2 Types of Lubricants... A24-2 Grease Lubrication... A24-3 Oil Lubrication... A24-3 Lubrication under Special Environments.. A24-4 Lubrication

More information

Introduction of Each Series

Introduction of Each Series 12 Introduction of Each Series 12.1 eavy Load Type, MSA Series A. Construction LINEAR GUIDEWAY Upper Retainer Carriage End Cap End Seal Grease Nipple Ball Lower Retainer Rail 45 eavy Load Type, MSA Series

More information

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR

Ball. Ball cage. Fig.1 Structure of Caged Ball LM Guide Actuator Model SKR Caged all LM Guide Actuator Model Inner block all screw shaft Grease nipple Outer rail all cage all Structure and Features Fig.1 Structure of Caged all LM Guide Actuator Model Caged all LM Guide Actuator

More information

YASKAWA AC Drive-V1000

YASKAWA AC Drive-V1000 YASKAWA AC Drive-J1000 Compact V/f Control Drive Manual Supplement Supplement to: J1000 Quick Start Guide TOEPC71060626C Type: CIMR-JU A Models: 200 V Class, Three-Phase Input: 0.1 to 5.5 kw 200 V

More information

The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable.

The Block Structure. Linear block SBG, SBS, SPG and SPS types are available. All blocks are dimensionally interchangeable. Circular arc groove Two pint contact structure of circular arc groove. It keeps the function of self-aligning and smooth rolling performance. 45 angle of contact Four rows of circular arc groove contact

More information

Caged Ball LM Guide Actuator SKR

Caged Ball LM Guide Actuator SKR Caged Ball LM Guide Actuator SKR For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG No.309-11E Integrated LM Guide and Ball Screw High-rigidity /

More information

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain

NEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications

More information

CLOSED LOOP STEPPING MOTOR SINGLE-AXIS ROBOTS

CLOSED LOOP STEPPING MOTOR SINGLE-AXIS ROBOTS TRANSERVO Series Product Lineup CLOSED LOOP STEPPING MOTOR SINGLE-AXIS ROBOTS Excellent characteristics of both stepping motor and servomotor were combined. Stepping motor single-axis robots "TRANSERVO"

More information

Linear Way F LWF Ⅱ 133 Ⅱ 134

Linear Way F LWF Ⅱ 133 Ⅱ 134 Linear Way F 33 34 Linear Way F umber and Specification xample of an identification The specification of series is indicated by the identification. Indicate the identification, consisting of a model, dimensions,

More information

Linear Bushing. General Catalog A-523

Linear Bushing. General Catalog A-523 Linear Bushing General Catalog A Technical Descriptions of the Products B Product Specifications (Separate) Features and Types... Features of the Linear Bushing... Structure and features... Dedicated Shafts

More information

NR/NRS. LM Guide B-93. A Technical Descriptions of the Products (Separate) B Product Specifications

NR/NRS. LM Guide B-93. A Technical Descriptions of the Products (Separate) B Product Specifications R/RS Guide Product Specifications Dimensional Drawing, Dimensional Table s R-R and R-R... s RS-R and RS-R... s R-A and R-A... s RS-A and RS-A... s R- and R-... s RS- and RS-... Standard engt and aximum

More information

C-Lube Linear Way MV

C-Lube Linear Way MV -Lube Linear Way 49 50 -Lube Maintenance Free Series -Lube Linear Way Long term maintenance free compliant! The aquamarine end plate is the symbol of maintenance free. Designation of Identification Number

More information

Precision, Caged Ball Screw

Precision, Caged Ball Screw Models SBN, SBK, SDA, HBN and SBKH Pipe presser Screw shaft Return pipe Ball screw nut Ball Ball cage Fig.1 Structure of High-Speed Ball Screw with Ball Cage Model SBN Point of Selection Options Model

More information

BERG AB Тел. (495) , ф. (495) S B L B L Max. [N]

BERG AB Тел. (495) , ф. (495) S B L B L Max. [N] www.thk.ru BERG AB thk@thk.ru Тел. (9)-77--7, ф. (9)-3-3071 Micro-LM Systems Micro-LM Guide RSR-M RSR-M 1 and P R O T O T Y P E Smallest LM Guide worldwide The micro series of RSR type are miniaturized

More information