Congratulations! You have made an excellent choice with the purchase of the quality AUTO-XS product.

Transcription

1

2 Contents 02 Introduction 03 General Information and Safety Instructions 05 Parts List 06 Getting Started and Assembly 07 How to Operate 08 Other Useful Information 09 Warranty Card

3 Introduction 1 2 Congratulations! You have made an excellent choice with the purchase of the quality AUTO-XS product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supported by the high quality standards of ALDI. We want you to be completely satisfied with your purchase so this AUTO-XS product is backed by a comprehensive manufacturer s 2 year warranty and an outstanding after sales service through our dedicated Helpline. We hope you will enjoy using your purchase for many years to come. If you require technical support or in the unlikely event that your purchase is faulty please telephone our Helpline for immediate assistance. Faulty product claims made within the 2 year warranty period will be repaired or replaced free of charge provided that you have satisfactory proof of purchase (keep your receipt safe!). This does not affect your statutory rights. However, be aware that the warranty will become null and void if the product is found to have been deliberately damaged, misused or disassembled. 2

4 General Information and Safety Instructions 3 PLEASE READ AND SAVE ALL INSTRUCTIONS TO ENSURE THE SAFE AND EFFECTIVE USE OF THE JACK STANDS. Read, understand and follow all the instructions before operating this device. Failure to heed all warnings could result in severe personal or bystander injury, even death and/or property damage. DO NOT exceed rated capacity. Load should be evenly distributed over the 2 Jack Stands or the Jack Stands may fail causing severe injury or death. Use only on a hard level surface. Place the load in the center of the saddle only. DO NOT drop the vehicle onto the Jack Stands, even if the load is less than the weight capacity limit. The force of the weight dropping on the Jack Stands may cause the Jack Stands to fail. DO NOT move the release handle when the Jack Stands are supporting a vehicle. Use Jack Stands as a matched pair to support one end of a vehicle only. These Jack Stands are not to be used to simultaneously support both ends or one side of a vehicle. Lift only areas of vehicle as specified by the vehicle manufacturer. DO NOT get under or allow anyone under the vehicle until it has been supported by the Jack Stands. DO NOT alter or modify this product. Visual inspections should be made before each use of the Jack Stands by checking for abnormal conditions such as cracked welds and damaged, loose, or missing parts. If the Jack Stands are accidentally subjected to an abnormal load or shock they must be taken out of service immediately and be inspected by a qualified repair or service center. It is recommended that owners and/or operators perform an annual inspection of the Jack Stands. WARNING: before using the Jack Stands you must check to make sure that the tab is bent in and the ratchet mast cannot be pulled up and out of the base. This prevents accidental removal of the ratchet mast from the base. SAVE THESE INSTRUCTIONS! 3

5 WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in serious personal injury and/or property damage. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are a factor which cannot be built into this product, but must be supplied by the operator. READ AND SAVE ALL INSTRUCTIONS! SAFETY WARNING Although your Jack Stands are easy to operate, for your safety, the warnings below must be followed: 1. Always use Jack Stands on a hard level surface. 2. Keep children away from the vehicle while using Jack Stands. 3. Center the load on the saddle when in use. 4. DO NOT get under or allow anyone to get under the car until the Jack Stands are securely in place. SAVE THESE INSTRUCTIONS! 4

6 Parts List 1 5 Main Parts Saddle Ratchet Mast Tab (locking mechanism) Release handle Base Contents of Packaging Base Ratchet Mast Instruction Manual If any of the above items are missing, please contact our customer service department at or us at customer-service@wk-usa.com for replacements. Our business hours are Mon-Fri 9:00 AM - 4:00 PM CST. 5

7 Getting Started and Assembly and Assembly 1 6 Before Each Use Visual inspections should be made before each use of the Jack Stands by checking for abnormal conditions such as cracked welds and damaged, loose, or missing parts. If the Jack Stands are accidentally subjected to an abnormal load or shock they must be taken out of service immediately and be inspected by a qualified repair or service center. It is recommended that owners and/or operators perform an annual inspection of the Jack Stands. WARNING: before using the Jack Stands you must check to make sure that the tab is bent in and the ratchet mast cannot be pulled up and out of the base. This prevents accidental removal of the ratchet mast from the base. Assembly Remove the parts from the box. The Jack Stands are completely assembled except for the ratchet mast. Place the ratchet mast into the base with the ratchets facing as shown below. Lift the release handle and insert the ratchet mast into the base. On the opposite side of the release handle is a tab. Using a small punch or hammer, bend the tab in enough to keep the ratchet mast from coming out of the base. This prevents accidental removal of the ratchet mast from the base. Ratchets Tab Release handle 6

8 How to Operate Make sure the vehicle and Jack Stands are on a level stable surface. Lift the vehicle following the Car Jack instructions. Be sure to set the parking brake and block the unlifted tires. Consult the vehicle s owner s manual to determine the location of the support points and position the stands beneath the ideal points. DO NOT CRAWL UNDER THE VEHICLE TO POSITION THE STANDS. Raise the ratchet mast manually by pulling up on the mast to the highest position, making sure the ratchet tooth is fully engaged by the locking mechanism. Make sure both Jack Stands are at an equal height. Slowly lower the vehicle onto the stands making sure the load is centered on the saddles. Make sure the load and the Jack Stands are stable. When the stands are no longer needed, raise the vehicle using a Car Jack high enough to clear the Jack Stands. Remove the Jack Stands being careful not to crawl under the vehicle. Slowly lower the vehicle to the ground with the Car Jack. You may lower the ratchet masts by raising the release handle. Because of potential hazards associated with this type of equipment, no alterations should be made to this product. Only the attachments provided with this product should be used. DO NOT substitute parts from another product. ANY JACK STAND THAT APPEARS TO BE DAMAGED IN ANY WAY, IS FOUND TO BE WORN, OR OPERATES ABNORMALLY SHOULD BE IMMEDIATELY REMOVED FROM SERVICE. 7

9 Other Useful Information 1 8 Technical Specifications Rated Capacity Lowered Height Maximum Height 2 Tons (4000 pounds) 10-3/8 inches 16-1/8 inches Maintenance Check for cracks or damage prior to each use. Discard if cracked or damaged. Periodically clean the bottom of the supports and the top of the posts of any dirt, grease, or debris. Periodically lubricate the release handle pivot points. Service Center If you have any questions in regards to the operation of these Jack Stands please contact our service center at: Wachsmuth & Krogmann, Inc. Tel: customer-service@wk-usa.com (Business hours Mon - Fri 9:00 AM - 4:00 PM CST) Environmental Protection If the Jack Stands should no longer work at all, please make sure that they are disposed of in an environmentally friendly way. 8

10 USA Your details: JACK STANDS Name Address E mail Date of purchase* * We recommend you keep the receipt with this warranty card Location of purchase Description of malfunction: If you have a malfunction please contact our Customer Service department and send this completed warranty card with the receipt to: Wachsmuth & Krogmann,lnc. 621 IL Route 83 Suite 202 Bensenvillie, IL customer-service@wk-usa.com AFTER SALES SUPPORT customer-service@wk-usa.com MODEL: ZQ2001, 02/2014, Phone lines available Monday thru Friday, 9am - 4pm CST YEAR WARRANTY Cyan Magenta Yellow Black