GMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output.
|
|
- Estella Welch
- 6 years ago
- Views:
Transcription
1 Fabricator C DC 20 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repairs Sheet Metal Fabrication Farm/Ranch Auto Body Repair Home DIY Hobbyist Rated Output 90 Amp at 8.5, 20% Duty Cycle Max. Open Circuit oltage 34 DC Amperage Range Amp Wire Feed Speed IPM (2-8 m/min) Weight 70 lbs. (3.8 kg) Order Information Part No: W Description: Fabricator 40 20//60 Fabricator 40 comes with: Power cord & NEMA plug 0ft (3m) MIG gun 0ft (3m) work cable and clamp Gas regulator/flowgauge and hose.023"-.030"/.035" reversible drive roll.023" solid wire starter spool 3 extra contact tips Lifting handle Enhanced Magnetics. Providing a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 3/6" (4.8mm) thick in a single pass. Simple Operation. Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases. Higher Output. The Fabricator 40 punches out 40 amp maximum output. Quick Change Polarity. Simple, quick change (no tools required) polarity from within the wirefeed compartment. 2 lbs./0 lbs. Spool Capacity. Wire compartment design allows easy installation of 2 lbs., 0 lbs., 4" and 8" wire spool sizes. Overload Protection. Shuts down the power source to protect the internal electrical components from overheating. Heavy Duty Transformer. The transformer is built to last using premium quality 428 F materials and fully dip varnished then baked for 4 hours. Metal Feed Plate. The metal wire drive system features 2 roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob. Quick Disconnect Fitting. Allows for quick and easy out-of-box assembly, along with convenient cleaning of the torch and replacement of liner. ISO 900 Quality System. The certified quality management system guarantees the manufacture and distribution processes of this product. Brilliant Characteristics. Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thicknesses. New Gun. Quality WeldSkill MIG gun. * Limited warranty, refer to warranty schedule.
2 Fabricator C DC 20 Features * Easy installation wire spool compartment The 2 roll metal wire drive system with quick change drive rolls & single tension knob Simple, quick change over polarity (no tools required) for and 32 Amp circuit breaker protects the machine Quick Disconnect MIG gun connection Easy mount and lock spool holder * Subject to change without notification. page 2 U.S. (TX): / FAX U.S. (NH): / FAX Thermadyne Canada : / FAX
3 Fabricator C DC 20 Specifications * Welding DC Maximum output 40 Amp Output at 20% duty 04 F 90 Amp at 8.5 Current Range Number of oltage Settings 4 Welding oltage Range Amp olt Maximum Plate Thickness 3/6" (4.8mm) Wire Diameter Range Mild Steel:.023" -.035" ( mm) Stainless Steel:.023" -.035" ( mm) Aluminum:.030" -.035" ( mm) Flux cored:.030" -.045" ( mm) Fitted Feedroll Suits MIG Wire.023"-.030"/.035" ( /0.9mm) Warranty Period 5 Years Approvals CSA IEC (CE) Primary Power Primary oltage 20 olt Supply Plug NEMA 5-5P Rated 90 Amp 2.8 ka Lead cord length 6ft (.8m) Rated Input Current 24 Amp MIG Guns Gun Type Gun Length 0ft (3m) Part Number W40400 Nozzle Part No: 2-50 Size: /2" (2.7mm) Contact Tip Part No: -23 Size:.023" (0.6mm) Diffuser Part No: 5 Liner Part No: Size:.030" -.035" ( mm) Dimensions & Weight Dimensions HxWxD 5.8" x 8.9" x 2.3" (400 x 255 x 540mm) Weight 70 lbs. (3.8 kg) Process Capabilities * Process Electrode Wire Electrode Polarity Shielding Gas Min Thickness **Max Thickness MIG ().023",.030",.035" Mild Steel (0.6, 0.8, 0.9mm) DC+ Autocraft 70S-6 MIG ().023",.030",.035" Stainless Steel (0.6, 0.8, 0.9mm) DC+ CO 2 (00%) or 22 gauge 3/6" Argon/CO 2 (0.8mm) (4.8mm) Argon/CO 2 or 20 gauge 3/6" Tri-Mix (.0mm) (4.8mm) MIG ().030",.035" 20 gauge 3/6" Aluminum (0.8, 0.9mm) DC+ Argon (00%) (.0mm) (4.8mm) Flux Cored.030",.035" 20 gauge 3/6" Self Shielded (0.8, 0.9mm) DC- N/A (.0mm) (4.8mm) Mild Steel *Limited warranty, refer to warranty schedule. Subject to change without notification. **Maximum thickness in a single pass. International : / FAX page 3
4 Fabricator C DC 5 Key Control * Welding gun connection 2 Wire feed speed control 3 Overheating indicator 4 Power on indicator 5 oltage step control *Subject to change without notification. International : / FAX page 4
5 Fabricator C DC Amp MIG Gun * Part No. W40400 Item Part No. Description Qty 2-50 Nozzle 2-30 Contact Tip 3 5 Gas Diffuser 4 W Conductor Tube 5 W Trigger 6 W Handle Assembly Contact Tips " (0.6mm) " (0.8mm) " (0.9mm) " (.0mm) " (.2mm) Nozzles /8" (9.5mm) 2-50 /2" (2.7mm) /8" (6mm) Conduits ", 5ft (7.6m) "-.035", 5ft (4.5m) "-.045", 5ft (4.5m) 42N "-3/64", 5ft (4.5m) Accessories * Small Cart with Running Gear/Cylinder Rack Part No. W40500 Sturdy construction. For gas cylinders no larger than 7" (78mm) diameter, maximum weight 75 lbs. (34 kg). 80 Amp Spool Gun (9 ft) Part No. W4000 Spool gun assembly with 9 ft cable, 80 30%. No interface kit required, just plug and play. *Subject to change without notification. page 5 U.S. (TX): / FAX U.S. (NH): / FAX Thermadyne Canada : / FAX
6 Fabricator C DC 20 Ordering Information EQUIPMENT OPTIONS PART NO. DESCRIPTION QTY PRICE Fabricator 40 Package W Fabricator 40, 80 Amp MIG gun (0ft), 2 roll wire feed system, 6ft (.8m) gas hose, gas regulator/flowgauge, 0ft (3m) work lead Fabricator 40 Package c/w Cart W00250 Fabricator 40, Cart, 80 Amp MIG gun (0ft), 2 roll wire feed system, 6ft (.8m) gas hose, gas regulator/flowgauge, 0ft (3m) work lead Fabricator 40 Package c/w Spool Gun W Fabricator 40, 80 Amp Spool gun (9ft), 80 Amp MIG gun (0ft), 2 roll wire feed system, 6ft (.8m) gas hose, gas regulator/flowgauge, 0ft (3m) work lead Fabricator 40 Package W Fabricator 40, Cart, 80 Amp Spool gun (9ft), 80 Amp MIG gun (0ft), c/w Cart & Spool Gun 2 roll wire feed system, 6ft (.8m) gas hose, gas regulator/flowgauge, 0ft (3m) work lead GUNS 80 Amp MIG gun (0ft) W40400 Gun assembly with 0ft cable (supplied with package), 80 30% 80 Amp Spool gun (9ft) W4000 Spool gun assembly with 9ft cable, 80 30% (no interface required) ACCESSORIES ictor Regulator/Flowmeter Mixed Gases Medalist 400 Series, HRF Flowmeter Regulator, Argon-Argon/CO2 mix gases ictor Regulator/Flowmeter CO Medalist 400 Series, HRF Flowmeter Regulator, CO2 gas Helmet/Gloves Small Cart with Running Gear/Cylinder Rack W40500 CONSUMABLES Drive Roll.023"-.030"/.035" ( /0.9mm) grooved for hard wire Drive Roll.035"-.045" (0.9-.2mm) grooved for hard wire Drive Roll.030"-.035" ( mm) U grooved for soft wire Drive Roll.040"-.045" (.0-.2mm) U grooved for soft wire Drive Roll.030"-.035" ( mm) grooved knurl for cored wire Drive Roll.045"-./6" (.2-.6mm) grooved knurl for cored wire Contact Tips Gas Diffusers Nozzles Conduits Filler Metals Shielding Gas Sturdy construction. For gas cylinders no larger than 7" (78mm) diameter, maximum weight 75 lbs. (34 kg) TOTAL QUOTE PRICE U.S. (TX): / FAX U.S. (NH): / FAX International : / FAX Canada : / FAX W ORLD HEADQUARTERS: THE AMERICAS EUROPE ASIA/PACIFIC Denton, TX USA U.S. Ph: () Fax: () West Lebanon, NH USA, Plasma Ph: () Fax: () Miami, FL USA Sales Office, Latin America Ph: () Fax: () Oakville, Ontario, Canada International Ph: () Fax: () Rio de Janeiro, Brazil Ph: (55) Fax: (55) A Global Cutting & Welding Market Leader 6052 Swingley Ridge Road, Suite 300 St. Louis, Missouri 6307 U.S.A. Chorley, United Kingdom Ph: (44) Fax: (44) Milan, Italy Ph: (39) Fax: (39) Cikarang, Indonesia Ph: / 002 Fax: Osaka, Japan Sales Office Ph: Fax: Melbourne, Australia : Ph: Fax: International: Ph: Fax: Rawang, Malaysia Ph: Fax: Shanghai, China Sales Office Ph: Fax: Singapore Sales Office Ph: Fax: Form No (2/3/07) Thermadyne Industries, Inc., Printed in U.S.A.
GMAW FCAW. Fabricator 190 comes with:
Fabricator 90 90 C DC 230 Power, Performance, Features... and Reliability 5Year * Fabricator 90 comes with: Power cord and plug 0ft (3m), Tweco WeldSkill MIG gun 0ft (3m) work cable and clamp Gas regulator/flowmeter
More informationGMAW FCAW. 5Year * Fabricator 281 comes with:
Fabricator 28 C DC 208 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repair Garage/Body Shops Fabrication/Construction
More informationThermal Arc Professional: when welding is your business. Introducing the Portafeed VS 212. Portafeed VS 212
Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded following
More informationRepeatable welds again, and again, and again
INERTER CC DC AMP 575 Repeatable welds again, and again, and again 5 Year * Ultima comes with: Ultima unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma Arc
More informationArc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources
Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources FP90 Enjoy the ease of wire feed welding at an affordable price. This unit operates on standard 115 volt household current and requires no
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () MIG
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationTough, Compact... and Portable
INERTER Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW)** Flux Cored
More informationTough, Compact... and Portable
INERTER C DC 400 Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG () Flux
More informationAvailable in & International Customer Care: / FAX
Available in 75 90 & 80 International Customer Care: 940-38-22 / FAX 940-483-878 page The Only Universal Plasma! As a replacement (RPT ) torch, the has the ability to work on the majority of plasma power
More informationINDUSTRIAL Gas Apparatus CutSkill & FirePower Products
INDUSTRIAL Gas Apparatus CutSkill & FirePower Products Catalog www.victorequip.com Quality Statement Victor is committed to providing superior quality, reliable apparatus that earn our customers confidence.
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz
Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More informationHMC-410 AUTOMATIC OR SEMIAUTOMATIC CONTROL PANEL AND FEEDHEAD ASSEMBLY
A THERMADYNE Company HMC-410 AUTOMATIC OR SEMIAUTOMATIC CONTROL PANEL AND FEEDHEAD ASSEMBLY FOR A COMPLETE SYSTEM, ORDER: Cat. No. 170896A-002 Cat. No. 500019C-001 Cat. No. 870060-001 Cat. No. 870058 Cat.
More information212 Millermatic MIG Arc Welding Power Source,
Issued Jan. 2013 Index No. DC/12.46 212 Millermatic MIG Arc Welding Power Source, Auto-Set Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home
More informationGENERAL WELDING PRODUCTS CATALOG
GENERAL WELDING PRODUCTS CATALOG The Thermadyne Specialty Markets group operates within multiple distribution channels to meet the needs of several distinct industry segments. Specialty Markets These
More informationProcesses MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One!
Millermatic 212 Auto-Set Issued Oct. 2008 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
More informationPAK. PakMaster XL PLUS-CE Series. PLUS The New SureLok Torch! Air Plasma Cutting Systems. Over 40 Years of Plasma Cutting Innovation
MASTERXL PLUS- Air Plasma Cutting Systems 3 Year Warranty PakMaster 50XL PLUS-CE GENUINE CUT 12.7mm ( 1 2 ) SEVERANCE CUT 19.1mm ( 3 4 ) PakMaster 75XL PLUS-CE GENUINE CUT 19.1mm ( 3 4 ) SEVERANCE CUT
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)
Millermatic 255 Issued Oct. 2018 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops
More informationLight, Compact... and Portable
INERTER Light, Compact... and Portable Year * Dragster 85 comes with: Power cord & plug 2 x dinse 25mm plugs Carrying strap Best package systems Order Information Part No: 0-3077 Description: Dragster
More informationMillermatic MIG Arc Welding Power Source,
252 Issued April 2013 Index No. DC/12.49 Millermatic MIG Arc Welding Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light
More informationVIPER MIG-MMA Welder Package Amps #KUMJRVW182 $ $ Product Brochure For K019A. Description. Features
VIPER 182 - MIG-MMA Welder Package 30-180 Amps #KUMJRVW182 Package Deal Ex GST Inc GST $530.00 $583.00 Package Contents - SAVE $51.50 (Inc) 1 x W244 - VIPER 182 Multi-Function Inverter Welder-MIG-MMA $519.00
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)
Millermatic 255 Issued January 2019 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops
More informationWelder is warranted for three years, parts and labor. Gun warranted for 90 days, parts and labor.
Millermatic 211 Issued Aug. 2016 Index No. DC/12.58 MIG Power Source, Wire Feeder and Gun Package Quick Specs Light Industrial Applications Light fabrication Maintenance and repair Auto body Farm/home
More information3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range
PowerMaster Range Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded
More informationPipePro Welding System
PipePro Welding System Root-Fill-Cap Welding Issued Feb. 008 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe
More informationVIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018
VIPER 150 - Multi-Function Inverter Welder-MIG-MMA 30-150 Amps #KUMJRVM150 Ex GST Inc GST $430.00 $473.00 $400.00 $440.00 Special Ends 31/12/2018 ORDER CODE: W245 MODEL: VIPER 150 Type: MIG / MMA & Multifunction
More informationPipePro Welding System
PipePro Welding System Root-Fill-Cap Welding Issued Apr. 00 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe Fabrication
More informationTransmig F: CIGWELD.COM.AU
AUTO SET WELDING INVERTER Transmig 1300 654 674 F: 03 9474 7391 enquiries@cigweld.com.au CIGWELD.COM.AU Our customers spoke and we listened. CIGWELD have been listening to market feedback about having
More informationWelding Equipment Trolley Part Number: W General Information. Recommended Tools. Manual Rev AA WARNING
Manual 0-5094 Rev AA Cigweld Pty Ltd 71 Gower Street Preston, Victoria, Australia, 3072 Telephone: +61 3 9474 7400 FAX: +61 3 9474 7488 Email: cigweldsales@cigweld.com.au Website: www.cigweld.com.au! WARNING
More informationInverter Welding System
POWER WAVE 455/STT AND POWER FEED 10 DUAL Inverter Welding System NEW! POWER WAVE 455/STT AND POWER FEED 10 DUAL ADVANTAGE LINCOLN HIGHEST PERFORMANCE SYSTEM Superior STT, pulsed GMAW and FCAW welding
More informationPOWER MIG 210 MP MULTI-PROCESS WELDING MACHINE
POWER MIG 210 MP MULTI-PROCESS WELDING MACHINE Versatile, Rugged, Simple to Use. The POWER MIG 210 MP power supply is a multi-process welder for the hobbyist, educator or small contractor who wants to
More informationOne Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility. Available With Our ATC
One Torch for Virtually Any Plasma Cutting System! Total Plasma Cutting Flexibility Available With Our ATC Quick Change Connector! The Revolution in Plasma Torches Has Begun Introducing the First Universal
More informationPipeWorx Welding System
PipeWorx Welding System Issued Aug. 009 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe The Power
More information70 Series Swingarc Boom-Mounted
70 Series Swingarc Boom-Mounted Wire Feeder Issued Jan. 2015 Index No. M/13.11 Quick Specs Heavy Industrial Applications Heavy Manufacturing Metal Fabrication Construction Light Manufacturing Processes
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P)
Multimatic 255 MIG/Multiprocess Power Source, Wire Feeder and Gun Package Issued Nov. 2018 Index No. DC/12.9 Quick Specs Industrial Applications Contract welding services Plant maintenance shops General
More informationMillermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.
Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG Welders Fully
More informationIssued Feb Index No. M/ Series
Issued Feb. 017 Index No. M/.0 70 Series Constant-Speed Wire Feeder Quick Specs Heavy Industrial Applications Heavy manufacturing Metal fabrication Construction Light manufacturing Processes MIG (GMAW)
More informationIssued Jan Index No. M/ Series
Issued Jan. 2015 Index No. M/3.0 70 Series Constant-Speed Wire Feeder Quick Specs Heavy Industrial Applications Heavy Manufacturing Metal Fabrication Construction Light Manufacturing Processes MIG (GMAW)
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) DC stick (SMAW) DC Lift-Arc TIG (GTAW) Pulsed TIG (GTAW-P)
Multimatic 255 MIG/Multiprocess Power Source, Wire Feeder and Gun Package Issued January 2019 Index No. DC/12.9 Quick Specs Industrial Applications Contract welding services Plant maintenance shops General
More informationTotal Plasma Cutting Flexibility. One Torch for Virtually Any Plasma Cutting System! Take the Challenge. Available With Our ATC
MANUAL SYSTEMS REPLACEMENT PLASMA CUTTING TORCH One Torch for Virtually Any Plasma Cutting System! Take the Challenge 30 Days, 100% Satisfaction or Your Money Back, Guaranteed! Call 1-800-752-7621 for
More informationtaunton Broadway Route 138
MIL300837 Miller ArcStation 30FX Welding Table $279.99 MIL300850 X-Clamps 5 $39.99 each The Miller ArcStation 30FX is the ideal work surface for the welder who requires portability and space savings. The
More informationMillermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.
Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Sept. 2010 Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG
More informationManual Plasma Cutting Inverters
Manual Plasma Cutting Inverters AEQPLA Rev 2 100 654 674 I www.cigweld.com.au Introduction ictor Technologies Professional: When cutting and welding is your business At ictor Technologies we distinguish
More informationPipeWorxFieldPro System
PipeWorxFieldPro System Issued June 2013 Index No. PWS/6.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Field Operations Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes
More informationLarger area of contact, meaning big pushing force with less damage to the surface of the wire.
The Innovation The Planetics drive feeder transports the wire by means of two hyperbolically profiled rollers that in a planetary manner rotate around the welding wire. The drive power is transmitted from
More informationRepeatable welds again, and again, and again
INERTER DC CC 150 Repeatable welds again, and again, and again 5 Year * Ultima 150 comes with: Ultima 150 unit Quick Change Torch** Torch spare parts kit Coolant Quick Specifications # Processes Plasma
More informationCUTMASTER, Why TRUE? THREE YEAR WARRANTY. Thermal Dynamics Professional: When cutting and welding is your business WHEN YOU NEED IT.
CUTMASTER, Why TRUE? The CUTMASTER TRUE Series has been designed with the premise that recommended cut capacity should reflect the TRUE cut capacity. The TRUE Cut Series eliminates the concept of having
More information70 Series Swingarc. The Power of Blue. Quick Specs. Boom-Mounted Wire Feeder
70 Series Swingarc Issued Feb. 2012 Index No. M/13.11 Boom-Mounted Wire Feeder Quick Specs Heavy Industrial Applications Heavy Manufacturing Metal Fabrication Construction Light Manufacturing Processes
More informationTECHNICAL SPECIFICATIONS
Multi-WeldTM 350 MULTI-OPERATOR Connect Several DC+ Welders to One Power Supply. The is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the
More informationMIG/MAG-Welding Torch Push-Pull Plus
T e c h n o l o g y f o r t h e W e l d e r s W o r l d. MIG/MAG-Welding Torch Push-Pull Plus The versatile torch, with the Plus The Features: Fits any commercially available wire drive unit by using a
More informationEngine Driven Welding Equipment
Engine Driven Welding Equipment AEQEDW Rev 1 1300 654 674 I www.cigweld.com.au Introduction Contents CIGWELD Professional: When welding is your business At Victor Technologies we distinguish ourselves
More informationProcesses MIG (GMAW) Welding. Input Power 24 VAC, 50/60 or 100 Hz
XR -Control Issued April 2005 Index No. M/1.7 Push-Pull Wire Feed System Quick Specs Heavy Industrial Applications Emergency Vehicles Recreational Vehicles Shipbuilding Tool Boxes Trucks and Trailers Heat
More informationV350-PRO. (1) Advanced Process Panel only. TECHNICAL SPECIFICATIONS
ENGINE MULTI-PROCESS DRIVEN WELDERS Invertec Designed Smart. Built Tough. V350-PRO The is a versatile, multi-purpose, multi-process power source that s lightweight and portable. Available in Construction,
More informationPipeWorx Welding System
PipeWorx Welding System Issued Jan. 011 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes
More informationADVANCEMIG Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps
ADVANCEMIG 200 - Digital Synergic Inverter MIG/MMA/TIG Welder PFC MV 200 Amps ORDER CODE: Ex GST Inc GST $2,194.00 $2,523.10 W1107 MODEL: ADVANCEMIG 200 Type: MIG / TIG / MMA & Multifunction Part Number:
More informationPower MIG. The Professional s Choice.
WIRE FEEDER/WELDERS Power MIG. The Professional s Choice. When you want the flexibility of more than just a MIG machine, the new is the choice for you. Lincoln Chopper Technology delivers more welding
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output
More informationMINI MIG MIG Welder Amps
MINI MIG 180 - MIG Welder 35-180 Amps #KMM180 ORDER CODE: W240 MODEL: MINI MIG 180 Type: MIG Part Number: KMM180 Voltage (V): 240 Recommended Plug Amperage (amp): 15 Welding Current Range MIG (amp): 35-180
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders 2-Roll or 4-Roll Heavy Duty Industrial Feeders Designed for MIG and cored wire welding in job shop and manufacturing environments, the rugged LF-72
More informationCUTMASTER A-SERIES AUTOMATED PLASMA CUTTING SYSTEMS. We Bring Intelligence to the Table. Victor Thermal Dynamics introduces
AUTOMATED PLASMA CUTTING SYSTEMS ictor Thermal Dynamics introduces CUTMASTER A-SERIES The Cutmaster A-Series is the intelligent solution for economical and flexible plasma cutting with the proven reliability
More informationLF-72 and LF-74 Wire Feeders
SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders Processes MIG, Pulsed MIG, Flux-Cored Product Number LF-72 LF-74 See page 6 for specs on all models Input Power 24-42 VAC 50/60 Hz 9 Amps Rated Output
More informationLINC GUN THE ULTIMATE MIG GUNS
LINC GUN THE ULTIMATE MIG GUNS STICK GUNS AND WELDERS TORCHES LINC GUN The ultimate MIG guns Complete range to support all your welding applications. High quality rugged product build according to Lincoln
More informationLF-72 AND LF-74 WIRE FEEDERS
LF-72 AND LF-74 WIRE FEEDERS Shown with options: See page 4 for all models ISO 9001:2000 14001:2004 2-ROLL OR 4-ROLL HEAVY DUTY INDUSTRIAL FEEDERS Designed for MIG and cored wire welding in job shop and
More informationPROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS
PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS 2018 PRODUCT GUIDE Dent Pulling Solutions for Steel & Aluminum Dual-Spotter Solutions for Steel & Aluminum Panels UNI-9700 DELUXE Aluminum & Steel
More informationPistol Grip Guns. Processes MIG (GMAW) Welding with aluminum wire and other soft alloys Pulsed MIG (GMAW-P) with pulsing power source
Pistol Grip Guns Spoolmatic Quick Specs Heavy Industrial Applications Emergency Vehicles Recreational Vehicles Trucks and Trailers Boat/Yacht Building Sign Manufacturers The Power of Blue. The Spoolmatic
More informationMULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS
FLEXTEC 650X MULTI-PROCESS POWER FOR HEAVY DUTY APPLICATIONS Shown: K3425-1 SIMPLE. RELIABLE. FLEXIBLE. This multi-process welder delivers up to 815 amps of welding power for a variety of applications,
More informationPower MIG. The Professional s Choice.
WIRE FEEDER/WELDERS Power MIG. The Professional s Choice. When you want the flexibility of more than just a MIG machine, the new is the choice for you. Lincoln Chopper Technology delivers more welding
More informationPowerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT
Powerful. Durable. Simple. PowerCut Series PLASMARC CUTTING EQUIPMENT Plasma Cutting What is plasma cutting? Plasma is an ionized gas that is electrically conductive giving you the ability to cut most
More informationRFP # Welding Equipment, Supplies, and Bottled Gas SHELF OR CATALOG DISCOUNT
RFP #17-04-04 - Welding Equipment, Supplies, and Bottled Gas Commodity #450-042 Expires: July 2020 Bid Reference: RFP #17-04-04 Commodity: #450-042 Buyer: Janet Bradley Bid Reference: RFP #17-04-04 Expries:
More informationSubarc DC Series. Processes Submerged Arc (SAW) Stick (SMAW) Air Carbon Arc Cutting and Gouging (CAC-A) Subarc DC 650 shown.
Subarc DC Series Issued August Index No. DC/9. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy Fabrication Pipe Manufacturing Pressure Vessel Processes
More informationSubArc Digital Series
Series Issued June 208 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged
More informationDimension Multiprocess Welding
Series Issued Nov. 9 Index No. DC/19.2 Dimension Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Fabrication and Construction Heavy Manufacturing MRO Maintenance/Repair Pressure
More informationMIG/MAG-Welding Torch Push-Pull Plus
T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. MIG/MAG-Welding Torch Push-Pull Plus The "long-range torch" with the Plus The welding torches of the Push-Pull Plus series especially developed
More informationPOWER MIG 260 FABRICATION SIMPLIFIED
POWER MIG 260 FABRICATION SIMPLIFIED Fabrication Simplified The POWER MIG 260 welding machine sets the standard for MIG and Flux-Cored welding in light industrial shop fabrication, maintenance, and repair
More informationMIG/MAG Welding Torch Push-Pull Plus
T e C h n O l O g y F O r T h e W e l d e r S W O r l d. MIG/MAG Welding Torch Push-Pull Plus The "long-range torch" with the Plus The welding torches of the Push-Pull Plus series especially developed
More informationPrecision TIG 375. The Power To Perform! Advantage Lincoln TIG WELDERS. Output. Input 1 PHASE. Publication E /05
TIG WELDERS Precision TIG 375 The Power To Perform! The Precision TIG TM 375 delivers the Power to Perform setting a new standard in Square Wave Technology. Combining outstanding value-added features and
More informationLN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS
LN-9 AND LN-9 GMA Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA LN-9 GMA shown with CV-655 power source, K1524-1 universal wire reel stand, K1504-1 50/60 lb. coil adapter, K163 undercarriage
More informationPARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
More informationSemi-Automatic Wire Feeders. Semi-Automatic Contents Wire Feeders. Equipment
Semi-Automatic Contents Wire Feeders Semi-Automatic Wire Feeders LF-72 & LF-74 LN-742 LN-8 LN-9 LN-10 DH-10 Power Feed TM 25M Power Feed TM 10M Power Feed TM 10M Dual LN-23P LN-25 Page 2 Page 3 Page 4
More information4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip
4.09 Cutting Speed Chart: Mild Steel, SL100 Torch with Exposed Tip Art # A-04203 Electrode Start Cartridge Tip Shield Cup Body Shield Cap, Deflector 9-8215 9-8213 9-8237 9-8243 Torch: SL100 with Exposed
More informationMAKE WORK FLY. Eagle 10,000 Plus KEY FEATURES
MAKE WORK FLY Eagle 10,000 Plus Shown: K2343-3 KEY FEATURES A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Eagle 10,000 Plus does a variety
More informationTransmig 3 Phase & Synergic Pulse
Transmig 3 Phase & Synergic Pulse CIGWELD Professional: When welding is your business At CIGWELD we distinguish ourselves from our competition through superior featured, dependable products, technical
More informationMIG Guns & Accessories
MIG Guns & Accessories MIG Guns Recommended for applications using solid and flux core wire Guns are complete with 15' cable length A complete selection of replacement parts for most brands of guns is
More informationPSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
More informationAlumaFeed Synergic Aluminum Welding System
AlumaFeed Synergic Aluminum Welding System Issued Oct. 011 Index No. DC/34 MIG Arc Welding Power Source Quick Specs Industrial Applications Boat, Ship and Yacht Building Recreational Vehicles Trucks and
More informationWelding & Cutting solutions from ESAB
Welding & Cutting solutions from ESAB Arc Equipment Plasma Equipment Gas Apparatus Personal Protection Mechanized Cutting Welding Automation 2014 A full line of arc and plasma equipment, gas apparatus,
More informationSAE-400 Processes Stick, TIG, Flux-Cored (1), Gouging (1) With CV Adapter.
SAE-400 Processes Stick, TIG, Flux-Cored (1), Gouging (1) With CV Adapter. Product Number K1278-14 K1278-10 See back page for complete specs Output Range 80-575A DC Welding 3000 Watts AC Generator Rated
More informationVANTAGE 520 SD ENGINE-DRIVEN WELDERS/GENERATORS
VANTAGE 520 SD ENGINE-DRIVEN WELDERS/GENERATORS Utility Machine for the Outdoors When the job calls for structural steel welding and other rugged outdoor work, you need an engine-driven welder that covers
More informationMUST BE UL LISTED or EQUIVALENT
1 01 2 PKG MIG WELDER Rated Output: 200 Amps at 28 VDC 60% Duty Cycle or 250 A, 28 VDC at 40% Duty Cycle Max Open-Cicuit Voltage: 38 Wire Feed speed: 50-700 IPM Package includes: #MMM252 (#907321) Welder
More informationFOR SPECIALIZED ENVIRONMENTS
FOR SPECIALIZED ENVIRONMENTS Ranger 305 LPG Shown: Ranger 305 LPG, K2937-1 KEY FEATURES Choose the Ranger 305 LPG for those environments where gasoline and diesel emissions are not acceptable. Includes
More informationThe plasma arc comes on im me di ate ly when the torch trigger is activated. Make sure the power is OFF before changing consumables.
Choose the consumables (cut charts) WARNING INSTANT-ON TORCHES PLASMA ARC CAN CAUSE INJURY AND BURNS I O The plasma arc comes on im me di ate ly when the torch trigger is activated. Make sure the power
More informationRANGER 330MPX Welder/Generator
RANGER 330MPX Welder/Generator Shown: Ranger 330MPX (K3459-1) KEY FEATURES The Ranger 330MPX welder/generator leads the way for the construction, maintenance, and service truck industries. The modern design
More informationIssued Nov Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma Cutting Resistance Welding. Coolmate 3
Issued Nov. 2013 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube Mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationLN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC
LN-8 Semiautomatic Wire Feeder LN-8 WIRE FEEDER LN-8 shown with DC-600 power source, K1524-1 universal wire reel stand, K1557-1 swivel platform and a Magnum 400 gun and cable assembly. The LN-8 is a semiautomatic
More informationQuick Draw Spool Gun OWNER S MANUAL
Quick Draw Spool Gun OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationDescription. Order TECHNICAL SPECIFICATIONS
SEMIAUTOMATIC WIRE FEEDERS Semiautomatic, Constant Speed Wire Feeders The are semiautomatic constant speed wire feeders that provide dependable performance and reliable operation, making them ideal for
More informationIssued April 2018 Index No. AY/7.2 Coolmate Series. Processes TIG (GTAW) MIG (GMAW) Plasma cutting Resistance welding
Issued April 2018 Index No. AY/7.2 Coolmate Series Coolant Systems Quick Specs Light/Heavy Industrial Applications Manufacturing Aerospace Automotive Tube mills Automation Processes TIG (GTAW) MIG (GMAW)
More informationARM YOURSELF WITH THE RIGHT WELDER
ARM YOURSELF WITH THE RIGHT WELDER Ranger 225 Shown: Ranger 225, K2857-1 KEY FEATURES The Ranger 225 is a multi-process, engine-driven welder designed for a variety of processes stick, TIG, MIG or flux
More informationBryan Fuller - and avid welder Product Catalog.
Bryan Fuller - host of TWO GUYS GARAGE and avid welder. 2009 Product Catalog www.lincolnelectric.com INTRODUCTION The Lincoln Electric Company The Welding Experts Welding is everywhere, and Lincoln Electric
More informationSAE-500 Severe Duty ENGINE-DRIVEN WELDER / GENERATOR
SAE-500 Severe Duty ENGINE-DRIVEN WELDER / GENERATOR Superior Choice for Critical Welds SAE-500 Severe Duty is the preferred choice for its great arc performance, design simplicity, reliability and ruggedness!
More information