LINE BENCH GRINDER INSTRUCTION MANUAL FBG-001 FBG-001 YEAR. and trade dress used under license. Keep this tool away from children.

Transcription

1 Operation manual and security instructions inside the box. Use safety glasses. Keep this tool away from children. Ford Motor Company trademarks and trade dress used under license to Nine HKG, Ltd. fordmotorcompany.com Made in P.R.C. Authorized dealer Chemica Ltd. FBG-001 INSTRUCTION MANUAL 2 YEAR WARRANTY FBG-001 BENCH GRINDER EN LINE EN ENGLISH ORIGINAL INSTRUCTION MANUAL

2 1 APPLICATION DESCRIPTION (FIG A) PACKAGE CONTENT LIST SYMBOLS GENERAL SAFETY WARNINGS SAFETY INSTRUCTIONS SPECIFICALLY FOR BENCH GRINDERS OTHER SAFETY INSTRUCTIONS ASSEMBLY Eye shields/spark arresters (Fig.2) Work rest adjustment (Fig.3 & 4) OPERATING INSTRUCTIONS Operating Changing grinding wheels (Fig.5) TROUBLESHOOTING HANDY HINTS CLEANING AND MAINTENANCE Cleaning SERVICE DEPARTMENT STORAGE WARRANTY ENVIRONMENT... 9 Copyright 2015 Page 1

3 BENCH GRINDER 200W FBG-001 FBG-001 EN 1 APPLICATION This dry grinder is a combination tool tor coarse and fine grinding. The tool was developed mainly for the machining and sharpening of knives, scissors, shears, chisels, etc. and tools with cutting edges. Alt other applications are expressly excluded. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. Eye Shield 2. Spark Arrester / Eye shield Bracket 3. Grinding wheel 4. Work rest fixing knob 5. Switch 6. Mounting holes 7. Work Rest 3 PACKAGE CONTENT LIST Remove all packing materials Remove remaining packaging and transit supports (if existing) Check the completeness of the packing content Check the appliance, the power cord, the power plug and all accessories for transportation damages. Keep the packaging materials as far as possible till the end of the warranty period. Dispose it into your local waste disposal system afterwards. WARNING Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation! 1pc bench grinder 1 set support 1 set eye guards + assembly screws 1 instruction manual When parts are missing or damaged, please contact your dealer. Copyright 2015 Page 2

4 4 SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of personal injury or damage to the tool. In accordance with essential requirements of the European directive(s). Read manual before use Class II - The machine is double insulated; Earthing wire is therefore not necessary. Wear noise protection Wear protective gloves. Wear eye protection Wear a mask In dusty conditions 5 GENERAL SAFETY WARNINGS Attention! Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions for future reference. The term "power tool" in the safety warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. For safe operation : 1. Keep work area clean - Cluttered areas and benches invite injuries. 2. Consider work area environment - Don t expose power tools to rain. - Don t use tools in damp or wet locations. - Keep work area well lit. - Don t use tools in the presence of flammable liquids or gases. 3. Guard against electric shock - Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators). 5. Keep other persons away - Don t let persons, especially children, not involved in the work touch the tool or the extension cord and keep them away from the work area. 6. Store idle tools - When not in use, tools should be stored in a dry locked-up place, out of reach of children. Copyright 2015 Page 3

5 7. Don t force tool - It will do the job better and safer at the rate for which it was intended. 8. Use the right tool - Don t force small tools to do the job of a heavy duty tool. - Don t use tools for purpose not intended; for example don t use circular saws to cut tree limbs or dogs. 9. Dress properly - Don t wear loose clothing or jewelry, they can be caught in moving parts. - Non-skid footwear is recommended when working outdoors. - Wear protective hair covering to contain long hair. 10. Use protective equipment - Use safety glasses. - Use face or dust mask if working operations create dust. 11. Connect dust extraction equipment - If the tool is provided for the connection of dust extraction and collecting equipment, ensure these are connected and property used. 12. Don t abuse the cord - Never yank the cord to disconnect if from the socket. Keep the cord away from heat, oil and sharp edges. 13. Secure work - Where possible use clamps or a vice to hold the work. It is safer than using your hand. 14. Don t overheat - Keep proper footing and balance at all times. 15. Maintain tools with care - Keep cutting tools sharp and clean for better and safer performance. - Follow instruction for lubricating and changing accessories. - Inspect tool cords periodically and if damaged have them repaired by authorized service facility. - Inspect extension cords periodically and replace if damaged. - Keep hands dry, clean and free from oil and grease. 16. Disconnect tools - When not in use, before servicing and when changing accessories such as blades, bits and cutters, disconnect tools from the power supply. 17. Remove adjusting keys and wrenches - From habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. 18. Avoid unintentional starting - Ensure switch is in off position when plugging in. 19. Use outdoor extension leads - When the tool is used outdoors, use only extension cords intended for outdoor use and so marked. 20. Stay alert - Watch what you are doing, use common sense and do not operate the tool when you are tired. 21. Check damaged parts - Before further use of tool, it should be carefully checked to determine that it will operate properly and perform its intended function. - Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. Copyright 2015 Page 4

6 - A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated in this instruction manual. - Have defective switches replaced by an authorized service center. - Don t use tool if switch does not turn it on and off. 22. Warning - The use of any accessory or attachment other than one recommended in this instruction manual may present a risk of personal injury. 23. Have your tool repaired by a qualified person - This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user. 6 SAFETY INSTRUCTIONS SPECIFICALLY FOR BENCH GRINDERS 1. Do not use damaged or misshapen wheels and do not use brushes. 2. Use only grinding wheels recommended by the manufacturer which have a marked speed equal to or greater than the speed marked on the nameplate of the tool. 3. Adjust the spark arrestor frequently so as to compensate for wear of the wheel, keep the distance between the guard and the wheel as small as possible, but in any case not greater than 2mm. 4. Fasten the grinder on a suitable work surface. Before starting work, the machine must be bolted with four bolts and nuts on a suitable, stable and horizontal work surface. 7 OTHER SAFETY INSTRUCTIONS 1. Wear protective glasses. 2. Always use with guard and eye shields. 3. Do not over tighten wheel nut. 4. Ensure grinding wheel rotate freely before switching on power. 5. Stand beside the bench grinder when turn on the switch, do not stand in front of the grinder. Then after, stand or seat in front of machine, to start working. 6. Allow a new grinding wheel to rotate for one minute prior to use to ensure it is in good condition. 7. Don t operate the grinder with the wheel guard off. 8. Don t use the grinding wheels for cutting purposes. Copyright 2015 Page 5

7 WARNING! : Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. 8 ASSEMBLY 8.1 Eye shields/spark arresters (Fig.2) Before use, the eye shields/spark arresters must be fitted to the grinder. Remove both eye shields from packaging, position the shields over the two mounting brackets above the grinding wheels with the flanges of the spark arrester facing away from you, fix with the screw and washer provided. At this stage do not fully tighten, see fig Work rest adjustment (Fig.3 & 4) Take the work rest out of the package, fix on the grinder with the knob and washer provided as shown in Fig. 3. The gap between the rests and the wheels should be checked before use. Measure the gap between the grinding wheel and the rests; this should be as small as possible not greater than 2 mm, if not, loosen the two knobs on each of the rests, set the correct gap and fully tighten, see Fig. 4. The gap must be maintained as the wheel wears. 9 OPERATING INSTRUCTIONS 9.1 Operating Make sure grinder is securely mounted; mounting holes are provided in the base of the grinder for this purpose, but the screws are not provided. Plug in the mains supply and push the on/off switch right to the on position. Switch off and unplug the grinder when not in use. 9.2 Changing grinding wheels (Fig.5) To change the grinding wheels, first unplug from mains supply then remove the eye shield brackets, then undo and remove the three screws holding the wheel guard covers in place. Remove the cover. Undo and remove the two wheels retaining nuts (a). You may have to hold the wheel and give the spanner a firm tap with a soft headed hammer to release the nut, take off the large domed washer(b), paper washer(c) and remove the wheels(d). Copyright 2015 Page 6

8 NOTE: The nut on the right side of the grinder has a standard right hand thread (turn counter-clockwise to loosen). The one on the left side has a left hand thread (turn clockwise to loosen). Replace in same order, making sure both domed washers face correct direction, check the paper washer(c and e), if damaged replace with new paper washer. Hold the wheel and tighten the nut firmly but do not over-tighten. NOTE: only replace flanges with original items, these can be supplied through a authorized dealer. WARNING: OVERTIGHTENING CAN CRACK A GRINDING WHEEL 10 TROUBLESHOOTING Although your new bench grinder is really very simple to operate, if you do experience problems, check the following: Problem Cause Solution 1.Grinder will not start 1.Check that there is "mains" at the socket; 2.check the fuse; 3.check the connections in the plug; 1.test with an electrical screwdriver or another electrical appliance 2.if suspect replace with correct rating 3.correct and tighten poor connections 2.Wheel wobbles or vibrates 1.Check that the lock-nut is tight. 2.Check that the wheel is correctly located on the shaft and locating washer. If excessive pressure has been used or the wheel has "caught", it may be damaged causing it to vibrate. If there is any evidence that the wheel is damaged, do not use. 1.Tighten if needed 2.remove it and replace with a new wheel. Dispose of old wheels sensibly. 3.Wheel leaves rough finish. 1.Too much pressure on the wheel can cause a poor surface finish. 2. If working with aluminum or similar soft alloys, the wheel will soon become clogged and will not grind effectively. 1. Apply less pressure 2. Clean the grinding stone using a dressing stone Copyright 2015 Page 7

9 10.1 HANDY HINTS Your bench grinder is useful for sharpening tools, e.g. drills, chisels; refacing tools, e.g. removing burrs from tool edges; removing material, however this is not a heavy duty tool and is designed primarily for light home and hobby use. The two different types of wheel will allow the grinder to meet various needs. Typically, use the coarse grinding wheel for rough cutting, i.e. removing a larger amount of material. Use the medium wheel for finishing to leave a smoother surface. If the grinder is used on soft metals such as aluminum, the wheel will soon clog and will have to be changed. At all times, let the grinder do the work, do not force it or apply excessive pressure to the wheel/cutter. Try to use the tool rest for supporting and guiding the workpiece. Do not grind using the side cheeks of the grinding wheel as undue pressure on the side of the wheel could cause the wheel to shatter. 11 CLEANING AND MAINTENANCE Attention! - Before performing any work on the equipment, pull the power plug Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage the plastic parts. 12 SERVICE DEPARTMENT Damaged switches must be replaced by our after-sales service department. If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 13 STORAGE Thoroughly clean the whole machine and its accessories. Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high and too low temperatures. Protect it from exposure to direct sunlight. Keep it in the dark, if possible. Don t keep it in plastic bags to avoid humidity build-up. Copyright 2015 Page 8

10 14 WARRANTY FBG-001 EN This product is warranted as provided by law for a 24 -month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding: batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation. Damage and/or defects resulting from inappropriate use also do not fall under the warranty provisions. We also disclaim all liability for any bodily injury resulting from inappropriate use of the tool. Repairs may only be carried out by an authorized customer service center for FORD tools. Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing. At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload. Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not exhaustive. Acceptance of claims under warranty can never lead to the prolongation of the warranty period nor commencement of a new warranty period in case of a device replacement. Devices or parts which are replaced under the warranty therefore remain the property of CHEMICA LTD. We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.). Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-molded case if applicable to the unit), accompanied by proof of purchase. 15 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice. Copyright 2015 Page 9