3M Automotive Aftermarket. 3M Blue Abrasives. The upgrade you ve been waiting for.

Size: px
Start display at page:

Download "3M Automotive Aftermarket. 3M Blue Abrasives. The upgrade you ve been waiting for."

Transcription

1 3M Automotive Aftermarket 3M Blue Abrasives. The upgrade you ve been waiting for.

2 3M Stikit Blue Abrasive Disc 3M Blue Abrasives are your go-to workhorse for the entire shop. 5" 3M Hookit Blue Abrasive Disc 3M s engineered ceramic mineral blend delivers best-in-class cut and life. An anti-loading design and the available universal multi-hole pattern extend the life of the abrasive for consistent performance. A full line of discs and sheets is available in an array of sizes and grades for use throughout the repair process. Available in 3M Hookit and Stikit attachment systems from body repair to paint prep, BLUE is all you need.

3 Blue goes head to head with any abrasive in its class. Designed for performance: Engineered ceramic mineral blend provides best-in-class performance using exactly the right balance of ceramic grain and premium aluminum oxide Anti-loading coating improves disc life Upgraded resins improve durability and finish Best-in-class value leaves the competition in the dust literally. 3M Blue Abrasive Multi-hole Discs are specially designed to improve anti-loading and boost dust extraction for improved productivity and a cleaner work environment. The multi-hole pattern captures dust, keeping the abrasive open for a faster cut and consistent performance throughout the life of the disc. 3M Hookit universal multi-hole pattern with alignment guide: Reduces loading for improved performance Improves dust extraction efficiency compared to 6 and 7 hole patterns Aligns with majority of dust extraction back-up pads Alignment line to quickly place disc on backup pad 3M Hookit Blue Abrasive Disc

4 Go Blue for Body Repair. Cuts fast with consistent results. 3M Blue Abrasives are engineered with a ceramic mineral blend that cuts through paint and body filler with consistent results every time. Available in Stikit and Hookit configurations, there is a 3M Blue Abrasive available for every sanding application. Improve technician safety with 3M Safety Products *. PN PN P1301 PN PN SF201AF Available in Stikit and Hookit. 3M Blue Abrasives can be used with Stikit and Hookit attachments. Choose your preferred format to block sand body filler. Be sure to use 3M Filler and Glaze Products for best results. PN PN Get the job ready for primer! Use 3M Blue Abrasives to featheredge around the repair area to finish the body work and get ready for paint prep. Use 3M Dry Guide Coat for best results. PN * Please note: Not a complete list. Select protective eyewear, appropriate gloves, hearing protection, respirator, and protective clothing based on your job and exposure assessment. Grade 3M Hookit Attachment 5" 3" Sheet Roll 2-3/4" (W) x 13 yd (L) 4 Rolls/Case 100 Discs/Roll 3M Stikit Attachment Sheet Roll 2-3/4" (W) x 30 yd (L) N/A N/A N/A * ** * ** Kiss cut at 69mm splits for multiple size formats. * PN = 25 Discs/Roll PN = 50 Discs/Roll ** PN = 10 yd (L) PN = 20 yd (L)

5 Go Blue for Paint Prep. Great performance and finish in finer grades. 3M Blue Abrasives are engineered to deliver great performance and finish in the finer grades to make paint prepping fast and consistent every time. Use 3M Masking Products to prepare the sanding area for primer. PN PN PN Available in discs and sheets. 3M Blue Abrasives can be used as discs and sheets for primer sanding. Sheets are available in convenient roll format to accommodate multiple block lengths depending on the job requirements. Reduce chance of burn through on edges, blends and bumpers with 3M Flexible Abrasive Sheets and the 3M Orbital Sander. PN PN Complete line of abrasives for all your paint prep needs. Use the full range of 3M Blue Abrasive discs to prepare for the paint booth. Whether primer sanding or blend prepping, hand or machine sanding, Hookit or Stikit, 3M Blue Abrasives will get the job done! 3M Accuspray Spray Gun and 3M PPS cover all your coating and painting needs. PN Grade 3M Hookit Attachment 5" 3" Sheet Roll 2-3/4" (W) x 13 yd (L) 4 Rolls/Case 100 Discs/Roll 3M Stikit Attachment Sheet Roll 2-3/4" (W) x 45 yd (L) * N/A N/A Kiss cut at 69mm splits for multiple size formats. *PN = 30 yd (L)

6 3M Blue Abrasives. The upgrade you ve been waiting for. With optimized abrasive technology, best-in-class cut performance and durability, and a complete abrasive line offering, Blue abrasives are the upgrade you ve been waiting for. 3M gives you exactly what you need to simplify the repair process, achieve consistent results and improve your bottom line, every day. Learn more about our complete system of collision repair solutions abrasives, fillers, adhesives, coatings, paint and masking solutions at 3MCollision.com! WHEN USING 3M PRODUCTS IT IS MANDATORY TO ADHERE TO ALL SAFETY STANDARDS. For more information, visit: 3MCollision.com/BlueAbrasives /3MCollision /3MCollision /3M_Collision /3MAutobodyRepair Product Use: Many factors beyond 3M s control and uniquely within user s knowledge and control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user s method of application. Automotive Aftermarket Division 3M Center, Building 223-6N-01 St. Paul, MN USA Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. Phone Web 3MCollision.com 3M, Accuspray, Hookit, PPS and Stikit are trademarks of 3M Company. Please recycle. Printed in USA. 3M All rights reserved

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs 3M Collision Repair Solutions 3M Abrasives and Power Tools Cutting & Grinding for Body Techs 3M Disc Sander Ideal for general metal fabrication applications, including grinding, blending, weld leveling

More information

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by: 3M Abrasive Systems Random Orbital Abrasive Disc Portfolio Sanding & Finishing Solutions! cs NsEivW e Dis Abra see inside Distributed by: The 3M Value The RIGHT Abrasives NEW Products NEW! Look for this

More information

GM Specification Annual Test Data

GM Specification Annual Test Data GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing

More information

GM Specification Annual Test Data

GM Specification Annual Test Data GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing

More information

3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels

3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels 3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to grind. It s grinding reinvented. Featuring NEW cubitron ii cut & grind wheels Grinding Reinvented 3M TM Cubitron TM II bonded abrasive

More information

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders Redefining The Finish Line 3M Elite Series Sanders NEW Elite Series Air-Powered Sanders and NEW Electric

More information

3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED.

3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 13020160.indd 1 2/8/13 9:46 PM GRINDING REINVENTED 3MTM CubitronTM II bonded abrasive grinding and

More information

Door Edge Protection Film 36 inch

Door Edge Protection Film 36 inch Door Edge Protection Film 36 inch Technical Data Sheet June, 2013 3M Part No.(s) PN 3M Part Descriptor(s) Door Edge Protection Film 36 inch Product Description 3M Door Protection Film is a super tough

More information

Shaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications

Shaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications NEW! 3M Cubitron II Abrasive Belts Introducing 994F and 997F for high pressure applications Shaping the future Revolutionary shaped abrasive grain grinds cooler and dramatically faster. Now engineered

More information

Automotive-Ready Portfolio of 3M Double Sided Tapes. Ready to go further. The future of automotive design begins here.

Automotive-Ready Portfolio of 3M Double Sided Tapes. Ready to go further. The future of automotive design begins here. Ready to go further. The future of automotive design begins here. Unleash your design freedom Ŕ Ŕ Quickly and securely attach lightweight and hard-to-bond materials Design-ready. Production-ready. Future-ready.

More information

SMC/Fiberglass Repair Adhesive - 90

SMC/Fiberglass Repair Adhesive - 90 SMC/Fiberglass Repair Adhesive - 90 Technical Data Sheet June, 2014 3M Part No.(s) 3M Part Descriptor(s) 3M SMC/Fiberglass Repair Adhesive - 90 Product Description 3M SMC/Fiberglass Repair Adhesive - 90,

More information

Panel Bonding Adhesive

Panel Bonding Adhesive Panel Bonding Adhesive Technical Data August 2017 Product Description 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. 3M Panel

More information

protect mask conduct reflect enhance 3M Specialty Tape Solutions

protect mask conduct reflect enhance 3M Specialty Tape Solutions 3M Specialty Tape Solutions protect enhance mask reflect conduct 1 quiet & more Meeting application challenges for appliances, aerospace, automotive, construction, MRO, electronics, commercial transport,

More information

3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive

3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive 3 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive Technical Bulletin October, 2009 Description 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive incorporate several

More information

3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity.

3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity. 3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity. Better. To help make you better. As a painter, you take great pride in your work. You know that the ultimate quality of the

More information

3M Automotive Aftermarket Division Masking Solutions Products Catalog/Edition 1. Critical Edge. Masking. Solutions.

3M Automotive Aftermarket Division Masking Solutions Products Catalog/Edition 1. Critical Edge. Masking. Solutions. 3M Automotive Aftermarket Division Masking Solutions Products Catalog/Edition 1 Critical Edge Masking Solutions Product Catalog Masking Applying paper and tape to a vehicle to protect it from overspray

More information

3M Industrial Paint Preparation and Finishing Solutions. Redefining. Finish. the. Line

3M Industrial Paint Preparation and Finishing Solutions. Redefining. Finish. the. Line 3M Industrial Paint Preparation and Finishing Solutions the Redefining Finish Line Choose 3M products for consistent quality results. Paint Preparation Abrasives...3 5 Tools... 5 Accessories...5 7 Paint

More information

Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive

Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive 3 Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive Technical Data Sheet June 2012 General Description Applications 3M Dual Lock Reclosable Fasteners are positive-locking, blind

More information

Buffer 8125 Owner s Manual

Buffer 8125 Owner s Manual 3M Buffer 8125 Owner s Manual A table of contents: A. SAFETY INFORMATION 1 B. OPERATING INSTRUCTION 4 C. SPARE PARTS INFORMATION (exploded view) 5 D. DISASSEMBLY METHOD 7 E. ASSEMBLY METHOD 10 F. GUIDELINE

More information

Goodbye dust. Hello profits.

Goodbye dust. Hello profits. Goodbye dust. Hello profits. powered by Introducing the Total Automotive Sanding System Engineered to support the ongoing need for cleaner, safer, more efficient and profitable shops. Best-in-class 3M

More information

Goodbye dust. Hello profits.

Goodbye dust. Hello profits. Goodbye dust. Hello profits. powered by Introducing the Total Automotive Sanding System Engineered to support the ongoing need for cleaner, safer, more efficient and profitable shops. Best-in-class 3M

More information

3M Abrasives.

3M Abrasives. 3M Abrasives. www.3m.com.au 2 3M Abrasives Cleaning Scotch-Brite Clean and Strip Discs (Depressed Centre) Scotch-Brite Clean and Strip Discs (Depressed Centre) offer you a quick and simple solution. Clean

More information

3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary

3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary 3M Electrical Tapes Product Selection Guide Insulate & Protect with Quality Tapes Get your hands on 3M Tape! 3M now offers new and experienced electricians a chance to sharpen their skills with the complete

More information

VentureClad Insulation Jacketing Tapes 1577 Series

VentureClad Insulation Jacketing Tapes 1577 Series VentureClad Insulation Jacketing Tapes 1577 Series Technical Data August 2017 Product Description 3M VentureClad Insulation Jacketing System is a zero permeability, all weather, multi-layered laminate

More information

3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide

3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide 3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide Installing Tall Skirt on SVC and SVE cabinets Instructions July 2016 78-0015-3067-0 2 July 2016 78-0015-3067-0 Contents 1. General

More information

Instructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter

Instructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter Instructions and Parts List TM 3M-Matic P/N 78-8069-3971-2 Infeed/Exit Conveyor Attachment, 1.2 Meter Type 19100 The Infeed/Exit Conveyor, 1.2 Meter, has been designed and tested to be used only with 3M-Matic

More information

Cable Ties. Data Sheet

Cable Ties. Data Sheet Cable Ties Data Sheet Product Description 3M Cable Ties are molded from 6/6 Nylon and are available in a variety of sizes, styles and colors including weather resistant black for outdoor use. Agency Listings

More information

Increasing load transfer in bolted joints

Increasing load transfer in bolted joints Increasing load transfer in bolted joints with 3M Friction Shims January 2017 3M Advanced Materials Division Load transfer in bolted joints 1. Shear Joint: the applied loading is at right angles to the

More information

Electronic Materials Brochure

Electronic Materials Brochure Electronic Materials Brochure TABLE OF CONTENTS 3 Introduction to Materials 4 ISODAMP C-8000 Materials 6 ISOLOSS SL Molding Materials - Thermosets 8 CONFOR EG Foams CONFOR SC Foams ISODAMP C-8000 MATERIALS

More information

Conductor Strength Tests on ACCR 1622TW T13 Pecos Conductor

Conductor Strength Tests on ACCR 1622TW T13 Pecos Conductor Conductor Strength Tests on ACCR 1622TW T13 Pecos Conductor 3M HCC Testing Laboratory August 5, 2011 Phu Trac Sr. Quality Engineer: Phu Trac Technical Manager: Dr. Herve Deve Lead Development Specialist:

More information

Repair Method for 3M Resilient Floor Protection System

Repair Method for 3M Resilient Floor Protection System May 2013 Technical Bulletin Repair Method for 3M Resilient Floor Protection System Description The 3M Resilient Floor Protection system is designed to allow spot repair of areas damaged by scratching,

More information

Series Description. 2 Specifications. Traffic Safety and Security Division. Product Bulletin Series 4000ESV 06/2017

Series Description. 2 Specifications. Traffic Safety and Security Division. Product Bulletin Series 4000ESV 06/2017 Traffic Safety and Security Division 3M Diamond Grade TM DG 3 Reflective Sheeting Series 4000 Product Bulletin Series 4000ESV 06/2017 1 Description 3M TM Diamond Grade TM DG 3 Reflective Sheeting Series

More information

3M TM Dyneon TM Fluoroplastics. Product Comparison Guide.

3M TM Dyneon TM Fluoroplastics. Product Comparison Guide. 3M TM Dyneon TM Fluoroplastics Product Comparison Guide. Characteristics 3M Dyneon Fluoroplastics. Nominal values, not for specification purposes 1) Melt Index is measured at the following conditions 265

More information

3M Cable Ties Product Guide. Made in USA. & Plenum Rated

3M Cable Ties Product Guide. Made in USA. & Plenum Rated 3M Cable Ties Product Guide Made in USA & Plenum Rated A new line of general use cable ties from 3M Made in USA These ties are made of high quality 6/6 nylon in the USA, which offers excellent availability

More information

3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN USA or or Made in USA

3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN USA  or or Made in USA 3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN 55144-1000 USA www.3m.com/aerospace or 1-800-364-3577 or 1-800-235-2376 Made in USA with US and Globally Sourced Materials 3M 2015. All rights

More information

Technical Data 3M Petroleum Sorbents

Technical Data 3M Petroleum Sorbents Technical Data 3M Petroleum Sorbents Use For control of spills of hydrocarbons on water or land. 3M Petroleum Sorbents repel water and will float (as long as surfactants are not also present). Product

More information

3M-MaticTM. Tape Edge Fold Kit. Instructions and Parts List. For Use On: AccuGlide TM STD Upper and lower Taping Heads. Purpose of Attachment

3M-MaticTM. Tape Edge Fold Kit. Instructions and Parts List. For Use On: AccuGlide TM STD Upper and lower Taping Heads. Purpose of Attachment Instructions and Parts List 3M-MaticTM Tape Edge Fold Kit For Use On: AccuGlide TM STD Upper and lower Taping Heads Kit Part Number Fits 78-8095-4854-4 2 Inch Upper Head 78-8095-4855-1 2 Inch Lower Head

More information

Composite Conductor 267-T16 ACCR. Deadend Strength Tests for 267-T16 ACCR

Composite Conductor 267-T16 ACCR. Deadend Strength Tests for 267-T16 ACCR Composite Conductor 267-T16 ACCR Deadend Strength Tests for 267-T16 ACCR Principal Investigator: Dr. Colin McCullough Reviewed by: Dr. Herve Deve Date of Report: March 24, 2010 Deadend Strength Tests for

More information

Data Sheet July For RoHS information, please visit

Data Sheet July For RoHS information, please visit Data Sheet July 2017 3M Cable Ties are molded from 6/6 nylon and are available in a variety of sizes and styles, including weather resistant black for outdoor use. Agency Approvals & Self Certifications

More information

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC 3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC For Tape Shield or Longitudinally Corrugated (LC) Shielded Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350

More information

3M Locator Plate

3M Locator Plate M Locator Plate 44-94 Instructions for the assembly of M Socket Connectors,.100" x.100" and.100" x.200" 1.0 General M Manual and Pneumatic Assembly Presses and accessory assembly equipment are recommended

More information

3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project

3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project 3M Electrical Markets Division Rubber, Mastic and Specialty Tapes Application Guide Choose the Right Tape for your Electrical Project 2 Table of Contents Insulating and Splicing...4 Scotch Linerless Rubber

More information

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN 3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN For Jacketed Concentric Neutral (JCN) Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350 kv BIL IEC 60840 72,5

More information

Intended Use: Explanation of Signal Word Consequences

Intended Use: Explanation of Signal Word Consequences SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future

More information

3M Boron Carbide Blasting Nozzles Performance at full blast

3M Boron Carbide Blasting Nozzles Performance at full blast 3M Boron Carbide Blasting Nozzles Performance at full blast Blasting nozzles of 3M Boron Carbide and 3M Silicon Carbide have a proven track record over decades of use, due to their extreme wear resistance,

More information

Do not install and/or operate this safety product unless you have read and understand the safety information contained in this manual.

Do not install and/or operate this safety product unless you have read and understand the safety information contained in this manual. Installation and Operation Instructions MR Tri- Light Available in various color combinations, the MR Directional LED surface mount, tri-color warning light is ideal for a wide variety of auxiliary warning

More information

3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit

3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit 3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit With High-K Stress Relief For 3-Conductor Copper Tape Shield Cables with or without Ground Wires 7600-T-3RJS Series Instructions

More information

3M Ladder Kit 3M710/MS 2 -TMK-LK

3M Ladder Kit 3M710/MS 2 -TMK-LK 3M Ladder Kit 3M710/MS 2 -TMK-LK Instructions 1.0 Summary The 3M Ladder Kit 3M710/MS2-TMK-LK is intended for mounting a communication line splicing system to a fiberglass extension ladder. 2.0 Kit Contents

More information

Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions

Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Class I Indoor Termination Voltage Designation: 12/20(24) kv Kit Contents: 1 HeatShrinkBreakoutBootAssembly 3 HeatShrinkBindingSleeves

More information

3M Cold Shrink QT-III Silicone Rubber Termination

3M Cold Shrink QT-III Silicone Rubber Termination 3M Cold Shrink QT-III Silicone Rubber Termination For Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Cable 7673-S-8(S)-TOW/WOT Instructions IEEE Std. No. 48 Class 1 Termination 69 kv Class, 350

More information

3M Locator Plate

3M Locator Plate 3M Locator Plate 3443-113 Instructions for the Assembly of 3M Tripolarized Wiremount Sockets 1.0 General The 3M Locator Plate 3443-113 was designed to aid in the assembly of the 3M Mini Socket Connector.50

More information

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT 3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT For Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350

More information

3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms

3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms 3M Products for Electrical Networks Wind Farm Capabilities Leading Edge Electrical Solutions for Wind Farms 3M technologies for wind farms Wind farm projects are difficult enough without the risk of construction

More information

Do not install and/or operate this safety product unless you have read and understand the safety information contained

Do not install and/or operate this safety product unless you have read and understand the safety information contained Installation and Operation Instructions ED3766 TRI Color Directional LED Available in various color combinations, the ED3766 Directional LED is a surface mount, tri-color warning light that is ideal for

More information

3M Housings CH Series

3M Housings CH Series Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 3M s The CH housings are constructed from 316 L or 304 stainless steel and manufactured in accordance to design and

More information

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TS (RW)

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TS (RW) 3M Cold Shrink Skirted Termination Kit QT-III 7672-S-8-TS (RW) for Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325 kv BIL CAUTION Working around energized systems

More information

Model No. SP Low Volume Low Pressure (LVLP) Gravity Feed Spray Gun

Model No. SP Low Volume Low Pressure (LVLP) Gravity Feed Spray Gun Model No. SP-33000 Low Volume Low Pressure (LVLP) Gravity Feed Spray Gun - 1 - TABLE OF CONTENTS: 1. Description 2. Specification and Technical Data 3. Important Safety Instruction 4. Instructions for

More information

Aftermarket Helio Installation Guide. Version 1.0.2

Aftermarket Helio Installation Guide. Version 1.0.2 Aftermarket Helio Installation Guide Version 1.0.2 Date: 9/30/2015 ID: aftermarket-helio-install Number of Pages: 9 File Name: 150930_aftermarket-helio-install_V1.0.2 Revision History Configuration Item

More information

Volition. VF-45 Quick Install kit. and Maintenance Cleaning Kit. 3Innovation

Volition. VF-45 Quick Install kit. and Maintenance Cleaning Kit. 3Innovation Volition VF-45 Quick Install Kit and Maintenance Cleaning Kit O b D s oc ol e um te en t COOL HAND TOOLS. VF-45 Quick Install kit Get your hands on a VF-45 Quick Install Kit from 3M and you will have everything

More information

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW)

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW) 3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW) for Tape Over Wire and Wire Over Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325

More information

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions 3M Industrial Products Abrasives and Power Tools for Welders Welding Solutions What s New for2011 3 4 1 2 5 6 1 2 3 3M Cubitron II Fibre Discs 987C The coolest way to increase productivity. If you work

More information

Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN

Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN 3 Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class 350 kv BIL IEC 60840 72,5 kv Kit Contents: 1 Silicone Rubber Lug Seal Insulator

More information

3M Metalworking Systems Power Tools, Accessories and Abrasives. Advanced. Metalworking Solutions

3M Metalworking Systems Power Tools, Accessories and Abrasives. Advanced. Metalworking Solutions 3M Metalworking Systems Power Tools, Accessories and Abrasives Advanced Metalworking Solutions Grit. Guts. Get it All. 3M Metalworking Systems With the addition of the new line of powerful, lightweight

More information

SAFETY INFORMATION & INSTRUCTION MANUAL

SAFETY INFORMATION & INSTRUCTION MANUAL SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future

More information

Machine Deals. The Complete 3M System: The Right Machine + The Right Abrasive + The Right Accessory = Outstanding Result

Machine Deals. The Complete 3M System: The Right Machine + The Right Abrasive + The Right Accessory = Outstanding Result Machine Deals. Industries that work with metal face many different demands but they all share the same needs to raise quality levels and reduce production times and costs whilst achieving demanding standards.

More information

3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series

3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series 3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working

More information

3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array

3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array 3M Textool Test and Burn-In Sockets for 1.0 mm Area Array Packages Including Ball Grid Array and Land Grid Array 1.0 mm Pitch Socket Platforms Socket Max. Package Maximum Max. Pin Lid Series Product Number

More information

SLiC Aerial Closures

SLiC Aerial Closures 3 SLiC Aerial Closures 1 The 3M SLiC Closure is a singlepiece aerial closure easily installed in construction or maintenance situations. The one piece construction permits complete splice access after

More information

3M Purification Product Brochure. CUNO CTG System. Clean and Economical

3M Purification Product Brochure. CUNO CTG System. Clean and Economical 3M Purification Product Brochure CUNO CTG System Clean and Economical Figure 1: The liquid flow principle The CUNO CUNO CTG System Advantage The CUNO CTG System is a way to reduce the labour costs and

More information

UK PG 6/23(92) Appendix 3: max g/l (approx. 1.7 lb/us gal) 7.2 m²/l for 125 µm (289 ft²/us gal for 5.0 mils)

UK PG 6/23(92) Appendix 3: max g/l (approx. 1.7 lb/us gal) 7.2 m²/l for 125 µm (289 ft²/us gal for 5.0 mils) DESCRIPTION Two-component high solids aluminum pigmented polyamine cured modified epoxy primer/coating PRINCIPAL CHARACTERISTICS Primer/coating designed for maintenance Low VOC Good flow properties Self

More information

3M Automotive Aftermarket 3M Paint Finishing Solutions.

3M Automotive Aftermarket 3M Paint Finishing Solutions. 3M Automotive Aftermarket 3M Paint Finishing Solutions. Saving you time on the path to the perfect finish. Achieve a perfect finish with 3M s best finishing systems. 3M Trizact Abrasives 3M Trizact Abrasives

More information

SIGMAZINC 105. PRODUCT DATA SHEET December 15, 2014 (Revision of July 1, 2013) DESCRIPTION. Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS

SIGMAZINC 105. PRODUCT DATA SHEET December 15, 2014 (Revision of July 1, 2013) DESCRIPTION. Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS DESCRIPTION Two-component, zinc epoxy primer PRINCIPAL CHARACTERISTICS Excellent anticorrosive properties Quick-drying, can be overcoated after 25 minutes Excellent application properties Cures at temperatures

More information

The right choice. 3M Abrasives for Right-Angle Systems

The right choice. 3M Abrasives for Right-Angle Systems The right choice. 3M Abrasives for Right-Angle Systems Cut, grind, finish and more... with a world-class abrasive system that helps you work smarter, finish faster! 1 For speed, long life and ease of use,

More information

SIGMAZINC 102 HS. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION

SIGMAZINC 102 HS. PRODUCT DATA SHEET December 15, 2014 (Revision of December 1, 2012) DESCRIPTION DESCRIPTION Two-component, high solids polyamide cured zinc rich epoxy primer PRINCIPAL CHARACTERISTICS Very good primer for systems with high solids epoxy buildcoats Can also be used as a system primer

More information

SIGMACOVER 805. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION

SIGMACOVER 805. PRODUCT DATA SHEET December 12, 2014 (Revision of April 1, 2013) DESCRIPTION DESCRIPTION Two-component, high solids polyamine adduct cured epoxy coating PRINCIPAL CHARACTERISTICS Can be used directly to metal Very good surface wetting Excellent corrosion resistance Outstanding

More information

3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits

3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits 3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits With High-K Stress Relief For 3-Conductor Type G (Ground Wire), Copper Tape Shield, Armored Cables 7600-S-3G Series Instructions IEEE Std.

More information

Installing the Boom Mount ET 350 Monitor (Model ET 350R)

Installing the Boom Mount ET 350 Monitor (Model ET 350R) Installing the Boom Mount ET 350 Monitor (Model ET 350R) Intended Use When properly installed using the materials provided, and according to these instructions, the boom mount is intended to mount the

More information

Adjustable Shop Stool with Backrest

Adjustable Shop Stool with Backrest Adjustable Shop Stool with Backrest Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

K SERIES PUSH ON & BULLET TERMINALS

K SERIES PUSH ON & BULLET TERMINALS Industrial products we wholesale, you distribute K SERIES PUSH ON & BULLET TERMINALS NYLON INSULATED PUSH ON TERMINALS VINYL INSULATED PIGGY BACK PUSH ON TERMINALS NYLON FULLY INSULATED BULLET TERMINALS

More information

Strength. Superior. Expected Precision. 3M Cubitron II Conventional Wheels for Gear Grinding

Strength. Superior. Expected Precision. 3M Cubitron II Conventional Wheels for Gear Grinding for Grinding Strength Superior Expected Precision Take your manufacturing process to the next level of productivity with 3M Cubitron II Conventional Wheels for gear grinding. 3 for Grinding A new dimension

More information

37SCENE 46SCENE 79SCENE

37SCENE 46SCENE 79SCENE Installation and Operation Instructions LED SCENE LIGHT LED SCENE LIGHT 37SCENE 46SCENE 79SCENE 37SCENE 46SCENE Introduction The 37SCENE, 46SCENE, 79SCENE LED Scene Lights are designed for the emergency

More information

NOVAGUARD 890. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION

NOVAGUARD 890. PRODUCT DATA SHEET January 21, 2015 (Revision of December 12, 2014) DESCRIPTION DESCRIPTION Two-component, solvent-free, amine-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Excellent resistance to crude oil up to 120 C (250 F) Suitable

More information

Ford Mustang 2013 GT500 Rear Break Install Guide for Mustang GT

Ford Mustang 2013 GT500 Rear Break Install Guide for Mustang GT Ford Mustang 2013 GT500 Rear Break Install Guide for Mustang GT 2005-13 NOTE: Installation of this kit requires above average mechanical skills. This procedure should only be undertaken by a competent

More information

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions 3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions February 2008 78-8140-1581-0 Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber

More information

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm. Instructions. October C

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm. Instructions. October C 3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm Instructions October 2010 78-8140-1581-0-C Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber

More information

Installation and Operation Instructions Safety Director Arrow

Installation and Operation Instructions Safety Director Arrow Installation and Operation Instructions Safety Director Arrow! WARNING! Failure to install or use this product according to manufacturers recommendations may result in property damage, serious bodily/personal

More information

Dual/Triple Manifold Water Filtration Systems Instruction Manual

Dual/Triple Manifold Water Filtration Systems Instruction Manual 3M TM Water Filtration Products Dual/Triple Manifold Water Filtration Systems Instruction Manual High Flow Series Water Filtration Systems Installer: Please leave this manual with owner/operator. 3M Water

More information

PRICE PAGES INSTRUCTIONS

PRICE PAGES INSTRUCTIONS PRICE PAGES INSTRUCTIONS Bidder may insert information into the following fields: Manufacture Name Vendor's Part Number Unit Price Bidder must bid using individual pricing associated to the unit of measure

More information

Customer Support

Customer Support Portable auxiliary air tanks owner's Manual aux05 aux05a aux10 WWW.CALIFORNIAAIRTOOLS.COM Customer Support 1-866-409-4581 TAbLe OF CONTeNTS INTROduCTION IntroductIon Important Safety InStructIonS components

More information

NOVAGUARD 810. PRODUCT DATA SHEET December 11, 2014 (Revision of April 1, 2014) DESCRIPTION

NOVAGUARD 810. PRODUCT DATA SHEET December 11, 2014 (Revision of April 1, 2014) DESCRIPTION DESCRIPTION Two-component, solvent-free, amine rapid-cured novolac phenolic epoxy coating PRINCIPAL CHARACTERISTICS One-coat tank coating system Excellent resistance to crude oil up to 90 C (194 F) Suitable

More information

3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination

3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination 3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working around energized electrical systems may

More information

3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm

3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm 3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm Instructions January 2009 78-8140-3696-4-A 3 Contents 1.0 Kit Contents... 3 2.0 3M No Polish LC Connector SM & MM 250/900 µm... 4 Safety Precautions

More information

SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks

SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks SLiC Aerial Terminal and Spiral End Seal for use with AMP* Quiet Front Terminal Blocks Instructions June 2002 78-8130-2161-1-B 1 Contents: 1.0 General... 3 2.0 Kit Contents... 3 3.0 Cable Preparation...

More information

3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS

3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS 3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS Instructions January 2009 78-8140-3691-5-A Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber

More information

Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables)

Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Instructions Kit Contents 3 Lug Covers 3 Cold Shrink Terminations 12

More information

Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current

Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current Thank you for buying a Rinehart Racing exhaust system. We are committed to providing premium products that with proper

More information

Directive 1999/13/EC, SED: max g/kg max g/l (approx. 2.6 lb/us gal) 6.6 m²/l for 100 µm (265 ft²/us gal for 4.

Directive 1999/13/EC, SED: max g/kg max g/l (approx. 2.6 lb/us gal) 6.6 m²/l for 100 µm (265 ft²/us gal for 4. DESCRIPTION Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS Primer coat in the PHENGUARD tank coating system Excellent resistance to a wide

More information

3M Mechanical Shearbolt Connectors, QCI Series

3M Mechanical Shearbolt Connectors, QCI Series M Mechanical Shearbolt Connectors, QCI Series Data Sheet November 2011 Description Connector Contents M Mechanical Shearbolt Connectors, QCI Series are designed to cover a wide range of conductor sizes

More information

Low Profile Creeper. Owner s Manual

Low Profile Creeper. Owner s Manual Low Profile Creeper Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

PRO-CLUTCH TM PC-1100-CA Evo Big-Twin. chain drive primary PC-1200-CA Evo Big-Twin. chain drive primary PC-1298-CA

PRO-CLUTCH TM PC-1100-CA Evo Big-Twin. chain drive primary PC-1200-CA Evo Big-Twin. chain drive primary PC-1298-CA HOME OF PRIMO BELT DRIVES PRO-CLUTCH TM PC-1100-CA / PC-1200-CA / PC-1298-CA / 1056-0020 INSTALLATION INSTRUCTIONS PC-1100-CA 1986-1989 Evo Big-Twin chain drive primary Pro-Clutch TM Stock Clutch PC-1200-CA

More information