High Accuracy Mechanical Fuel meter FM-100
|
|
- Frederica Watts
- 6 years ago
- Views:
Transcription
1 INSTRUCTION MANUAL S190, Rev A High Accuracy Mechanical Fuel meter FM-100 Congratulations on purchase of this World Class High Accuracy Mechanical Fuel Meter! Worldclass Mechanical Fuel Meter, extremely compact, yet easy to read Robust Aluminum Die Construction 3 Port Design which allows the meter to be fitted In Line or with the Inlet & outlet ports at Right Angle Nutating Disc Mechanism offers high tolerance to fuel contamination For use with Electric Fuel Pumps or gravity flow (with a minimum gravity head of ) Register cap can be easily removed & rotated to every 90 orientation for display Easy user re calibration Works with both Fuels & Oils Available in Litre / Gallon version in a choice of ¾ or 1 threads Resettable Batch Totalizer Reset Knob Meter n Resettable Totalizer Meter Label PARTS DESCRIPTION REFERENCE NUMBER DESCRIPTION QUANTITY 1 Meter 1 Reset Knob 1 3 Meter Label 1 1
2 INSTALLATION (Refer to Exploded View - Page 5 ) The meter can be installed in any position, on rigid pipelines or flexible hoses, directly on pumps or tanks. The meter can be fitted In Line or with the Inlet & outlet ports at Right Angle. Inlet & Outlet ports are marked with IN & OUT respectively. Meter Cover () can be removed and the Counter Assembly (7) can be rotated at every 90 orientation in four different positions. Meter Label (1) can be fixed before or after rotating the display. Inline Outlet Port Right Angle Outlet Port Inlet Port How to rotate the Display 1. Pull & remove the Reset Knob (3) from the meter.. Carefully remove the Cover Seal (5).. Unscrew the two Allen bolts () anticlockwise with key (size ) & remove the meter cover (). Reset Knob 5. Remove Counter Assembly (7) taking care not to damage the Housing Seal (13).. Rotate & reinstall Counter Assembly (7) in the desired position. The display can be chosen from one of the following positions. 3. Unscrew the four Allen bolts () anticlockwise with key (size ). 7. Install Cover Seal (5). First, tighten the four Allen bolts () by hand in an even & diagonal pattern as shown in the picture & finally tighten them with allen key (size ). 1 3 NOTE After installation, rotate the Total gears with fingers & ensure their smooth movement. 8. Install the meter cover (). Fix Reset Knob (3) by pushing it firmly onto the reset shaft.
3 METER CALIBRATION (Refer to Exploded View - Page 5 ) The meter is pre-calibrated in factory under standard conditions. A new calibration is necessary whenever there is a change in any of the following: Media Viscosity OR Flow Rate OR Operating Temperature Calibration procedure 1. Vent the air from pump, pipelines and meter by dispensing until the flow stream is full and steady.. Stop the flow by shutting off the nozzle, but let the pump run. 3. Reset the Batch Total to zero using reset knob (3).. Dispense at the desired flow rate into a graduated container whose capacity should not be lower than 0 litres (5 gallons). te Do not reduce the flow in order to reach a preset value of the calibration container. The right method is to start and stop the full flow repeatedly until the required level is obtained. 5. The Meter Value should be matched with the Container Value as given below. Important For ensuring the accuracy of measurements, the flow rate should never be kept below 0 LPM (5 GPM). If the Meter Value is higher than Container Value (i.e the meter is running fast), loosen the Calibration screw (1) anticlockwise. If the Meter Value is lower than the Container Value (i.e the meter is running slow), tighten the Calibration screw (1) clockwise. Meter Value Container Value te Always fix the Calibration Screw (1) with O Ring (15) to avoid leakage.. Repeat steps (3-5) until accuracy is satisfactory. OPERATION (Refer to Exploded View - Page 5) After installation, turn the reset knob () until the batch total becomes zero. The totalizer cannot be reset in any way. Use by Gravity This meter can also be used without pump pressure in a system where flow is generated due to difference in height between fuel level and dispensing point. tes Longer pipes or nozzles reduce the flow by causing higher pressure losses. Use By Gravity is not recommended where the height of fuel is lower than feet as the flow rate will be reduced, resulting in inaccurate measurement. For better accuracy, ensure that the flow rate never falls below 0 LPM (5 GPM). On field calibration is always recommended in case of Gravity installations. MAINTENANCE (Refer to Exploded View - Page 5) This fuel meter does not require any special maintenance other than the cleaning of measuring chamber (It may get clogged sometimes due to insufficient filtration). tes The meter can be easily disassembled into its main parts without removing the meter from the pipes. Never remove meter label from the meter. Internal parts should be cleaned with a soft brush or small tool (i.e. a screwdriver). During cleaning, be careful not to damage the measuring chamber or nutating disk. A new calibration is always necessary after disassembling the measuring chamber. Before disassembling always ensure that the line pressure is released and all fluid is drained from the meter. 3
4 CLEANING THE MEASURING CHAMBER (Refer to Exploded View - Page 5) 1. Remove the knob (), Meter cover () & Counter Assembly (7) by following steps 1-5 from the section: How to rotate the display - on Page.. Unscrew the two screws (8) with a Phillips Screwdriver and remove Nutating Disc Assembly.. Use a soft brush to clean the Measuring Chamber (1). Be careful not to damage the plastic components. Nutating Disc Assembly 5. To reassemble, reverse the abovementioned procedure paying particular attention to: Lubricate the Seal (1) and O ring (10) with small amount of grease before installation. 3. Remove O Ring (10) and disconnect Upper Chamber (9), Lower Chamber (1) & Nutating Disk (11). O Ring First, tighten the four Allen bolts () by hand in an even & diagonal pattern as shown in the picture & finally tighten them with allen key (size ). 1 3 Upper Chamber NOTE After installation, rotate the Total gears with fingers & ensure their smooth movement. Lower Chamber Recalibrate the meter as mentioned in the section: METER CALIBRATION - on Page 3. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE SOLUTION Insufficient accuracy Wrong calibration Soiled or blocked measuring chamber Recalibrate the meter as shown in section METER CALIBRA- TION - on Page 3 Clean the measuring chamber as mentioned in section CLEANING THE MEASURING CHAMBER - on Page Reduced flowrate Air in the fluid Clogged measuring chamber Blocked or soiled filter Locate and eliminate leaks in inlet lines Clean the measuring chamber as mentioned in section CLEANING THE MEASURING CHAMBER - on Page Clean the filter
5 EXPLODED VIEW COMPONENT LIST REFERENCE NUMBER DESCRIPTION QUANTITY 1 Meter Label Allen Bolts 3 Reset Knob 1 Meter Cover 1 5 Cover Seal 1 Allen Bolts 7 Counter Assembly 1 8 Screw 9 Upper Chamber 1 10 O Ring 1 11 Nutating Disk 1 1 Lower Chamber 1 13 Housing seal 1 1 Measuring Chamber 1 15 O Ring 1 1 Calibration Screw 1 17 O Ring 1 18 Bottom Plug INLET OUTLET
6 SPECIFICATIONS Meter Type Mechanical Mechanism Nutating Disk Inlet / Outlet Position In-Line or Right Angle Inlet / Outlet 3/" (F) or 1 (F) Threads BSP or NPT Flow Rate* 15 to 75 LPM ( to 0 GPM) Accuracy +/- 1% Repeatability +/- 1% Max. Working Pressure 50 PSI (3.5 BAR) Burst Pressure 35 PSI (30 BAR) Pressure Drop 3 PSI (0. BAR) Working Temperature range -10 C to 5 C (1 F to 150 F) Max. Resettable Batch Total 9999 Litres or Gallons Max. n Resettable Totalizer Litres or Gallons Least Count / Resolution 0.10 Litres or 0.10 Gallons Filter/ Screen Included Max. Viscosity of Media 000 cst Option to Recalibrate by User Yes Nr. Of positions in which display can be rotated Protective Shroud on Meter Weights & Measures Approved Calibration Certificate Included Water Resistance Protection by meter label For use with Electric Fuel Pumps Yes For use with Gravity Flow Yes (minimum ' head required) * For better accuracy, the flow rate should not be allowed to fall below 0 LPM (5 GPM) If solid particles enter the measuring chamber the correct working of the nutating disk may be affected. Always filter the fluid by installing a filter on the meter inlet. WETTED COMPONENTS Aluminium, Poly Butyl Terephthalate (PBT), Viton, Steel RECOMMENDED USE Diesel, Gasoline, Biodiesel, Low to medium viscosity oils DO NOT USE WITH Water based media etc. Groz Engineering Tools (P) Ltd. Groz Net Industries Village Kherki Daula, National Highway-8 Gurgaon-1001, Haryana, INDIA TEL / FAX / 1. FAX (USA) FAX (UK) info@groz-tools.com URL The Groz name, Groz logo and the mark are trademarks of Groz Engineering Tools (P) Ltd. India
INSTRUCTION MANUAL. Electric Drum Pump S2180, REV C EDR
INSTRUCTION MANUAL S2180, REV C Electric Drum Pump EDR-55 Electric drum pump designed for pumping fuels, water based media, light oils, DEF & select chemicals from metal drums of 55 gallon (205 litre or
More informationElectric Diesel Pump EDP/12, EDP/24
INSTRUCTION MANUAL Electric Diesel Pump EDP/1, EDP/4 S1940, Rev C Congratulations on purchase of this World Class Electric Diesel Pump! Portable Diesel transfer pumps designed for everyday use in Agricultural,
More information1 MECHANICAL FUEL METER
1 MECHANICAL FUEL METER USER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationAir Operated 1:1 Oil Ratio Pump OP-11
INSTRUCTION MANUAL Air Operated 1:1 Oil Ratio Pump OP-11 Congratulations on purchase of this World Class Air Operated Oil Ratio Pump! S1221, Rev C World-class Industrial Oil Dispensing pumps with guaranteed
More informationINSTRUCTION MANUAL. Direct Drive Air Compressor 2320, REV A. 1.
INSTRUCTION MANUAL 2320, REV A Direct Drive Air Compressor CONSTRUCTION DUAL MATERIAL CONSTRUCTION i) The cylinder block is made up of cast iron that prevents wear & tear thus imparting longevity to the
More informationElectric Fuel Pump FPM
INSTRUCTION MANUAL Electric Fuel Pump FPM S1590, Rev B LISTED MOTOR FPM-12, FPM-24, FPM-115, FPM-220 Congratulations on purchase of this World Class Electric Fuel Pump! Elbow This is an Electric Fuel Pump.
More informationElectric Fuel Pump FPM
INSTRUCTION MANUAL Electric Fuel Pump FPM S1590, Rev B LISTED MOTOR FPM-12, FPM-12/HF, FPM-24, FPM-115, FPM-220 Congratulations on purchase of this World Class Electric Fuel Pump! Pump Outlet Elbow Nozzle
More informationMECHANICAL FUEL METER. FM-100 and FM-200 Series Owner s Manual
MECHANICAL FUEL METER FM-100 and FM-200 Series Owner s Manual To the owner Congratulations on receiving your GPI Mechanical Fuel Meter. We at GPI are pleased to provide you with a fuel meter designed to
More informationAir Operated Grease Ratio Pumps 50:1 BGRP
INSTRUCTION MANUAL S1350, Rev C Air Operated Grease Ratio Pumps 50:1 BGRP Congratulations on purchase of this World Class Air Operated Grease Ratio Pump! World-class Industrial High Pressure Grease pump
More informationLM-200 MECHANICAL LUBE METER Owner s Manual
LM-200 MECHANICAL LUBE METER Owner s Manual To the owner Congratulations on receiving your GPI Mechanical Lube Meter. We at GPI are pleased to provide you with a Lube Meter designed to give you maximum
More informationMR 5-30 or MR 5-30N Series Fuel Meter Owner s Manual
SAVE THESE INSTRUCTIONS MR 5-30 or MR 5-30N Series Fuel Meter Owner s Manual TABLE OF CONTENTS General Information...2 Installation...3 Operation...3 Calibration...4 Maintenance...5 Troubleshooting...6
More informationInstallation & Operation Manual
MFM/M0 Inlet/Outlet: (F) IN-LINE FLOW METER Installation & Operation Manual IMPORTANT! This manual contains important warnings and other information. READ AND KEEP FOR REFERENCE. S70, Rev A January 00
More informationPh: (07) Fax: (07) Pump Manual
sales@scintex.com.au www.scintex.com.au Ph: (07) 3137 0135 Fax: (07) 3041 0541 Pump Manual 12V 75LPM Vane Pump & Vane Pump Station SPEP12V75 & SP12VFS75 SPEP12V75 SP12VFS75 Parts List No. Part Name QTY
More informationINSTRUCTION MANUAL. Portable Greasing System S1180, REV C GS
INSTRUCTION MANUAL S1180, REV C Portable Greasing System GS-5 Fully Portable & single person operation manual greasing system designed for volume greasing in workshop environments, site applications, on
More informationIMPACT & RATCHET WRENCHES. Create an impact! CAT 600
IMPACT & RATCHET WRENCHES Create an impact! CAT 600 IMPACT WRENCHES GROZ introduces professional range of Impact Wrenches for powerful, speedy and durable performance thereby improving productivity Impact
More informationOwner's Operation & Safety Manual SERIES 800C METER. For models 806C, 807C OUTSTANDING FEATURES
Owner's Operation & Safety Manual SERIES 800C METER For models 806C, 807C Model 806C Model 807C OUTSTANDING FEATURES 5 to 20 GPM / 19 to 76 LPM flow rate ±1% accuracy 3/4" or 1" NPT flow ports Large, easy
More informationMR 5-30 Aviation Fuel Meter Owner s Manual
SAVE THESE INSTRUCTIONS 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 MR 5-30 Aviation Fuel Meter Owner s Manual TABLE OF CONTENTS General Information... 2
More informationAMB100L-im-issue INSTRUCTION MANUAL 240V DIESEL MINI BOWSER AMB100L AMB100L
-im-issue1-2015 INSTRUCTION MANUAL 240V DIESEL MINI BOWSER INSTRUCTION MANUAL 240V DIESEL MINI BOWSER INTRODUCTION Thank you for purchasing a Macnaught 240V Diesel Mini Bowser (100 l/min) The Macnaught
More informationMR 5-30 or MR 5-30N Series Fuel Meter Owner s Manual
SAVE THESE INSTRUCTIONS 5252 East 36th Street North Wichita, KS USA 67220-3205 316-686-7361 FAX: 316-686-6746 800-835-0113 www.gpipumps.net A Great Plains Ventures Subsidiary MR 5-30 or MR 5-30N Series
More informationCAT 401. North American Version PUMPS & ACCESSORIES
CAT 401 North American Version PUMPS & ACCESSORIES CONTENTS For more information Visit: www.groz-tools.com Call: 888-685-2916 ELECTRIC FUEL PUMPS HEAVY DUTY ELECTRIC FUEL PUMPS 4 HEAVY DUTY HIGH FLOW
More informationOWNER S TECHNICAL MANUAL
OWNER S TECHNICAL MANUAL Electronic Oil Meter 660 Description Oval gear type Hose end meter with electronic LCD display for Lubricants and Anti-Freeze fluid. The Hose end meter includes a progressive opening
More informationADTFM-im -issue INSTRUCTION MANUAL DIGITAL DIESEL METER ADTFM
-im -issue2-2017 INSTRUCTION MANUAL DIGITAL DIESEL METER INSTRUCTION MANUAL DIGITAL DIESEL METER INTRODUCTION Thank you for purchasing a Macnaught Electronic Turbine Meter The Macnaught digital turbine
More informationMicroCoat. System Operating Manual MC2000 Series. MC785, MC785-WF Spray Valves. US: UK: Mexico:
MicroCoat System Operating Manual MC2 Series MC785, MC785-WF Spray Valves A NORDSON COMPANY US: 8-498-8865 UK: 8 585733 Mexico: 1-8-556-3484 Introduction The MicroCoat System provides precise lubrication
More informationMicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves
MicroCoat System Operating Manual MC Series MC785M, MC785M-WF Spray Valves A NORDSON COMPANY Introduction The MicroCoat System provides precise lubrication control for metal stamping operations. The MC
More informationLEGENDARY PRODUCTS & CUSTOMER SERVICE PUMPS & METERS FULL LINE OF QUALITY PRODUCTS MADE IN THE USA. Look for the red label! DOING BUSINESS SINCE 1972
LEGENDARY PRODUCTS & CUSTOMER SERVICE PUMPS & METERS MADE IN THE USA FULL LINE OF QUALITY PRODUCTS Look for the red label! DOING BUSINESS SINCE 1972 Great Plains Industries is a leading manufacturer of
More information25 mm (1 in), 38 mm (1-1/2 in) & 50 mm (2 in) TYPE S FLOWMETERS WITH MODEL 157 AND 800 SERIES REGISTERS
TS- Rev. B Type S lowmeters 1, 1 1 2 & 2 mm (1 in), mm (1-1/2 in) & mm (2 in) TYPE S LOWMETERS WITH MODEL 7 AND 8 SERIES REGISTERS 1-1/2" Type S with Model 7 Register SPECIICATIONS 1" Type S with Model
More informationFLUID TRANSFER SECTION 1
SECTION 1 FLUID TRANSFER HF10 FILTRATION UNIT...2 SUPER DELUXE PORTABLE FILTRATION UNIT...2 VISCOMAT OIL TRANSFER PUMPS...3 DC PUMPS VISCOMAT DC...3 HAND OPERATED PUMPS FOR OIL DRUMS...4 CLEAN OIL TRANSFER
More informationInstallation & Operation Manual. IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE.
Elecronic Preset Meter 2 Industrial Handheld Series Model EPM2-IND Standard Series IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE. IOM-139-02-EN (1-12) 53400-139 Rev.
More informationOil Control Handle with Mechanical Meter. Introduction. General Information. Important Information 3575-A 3575-B 3575-C 3575-D
Introduction Thank you for purchasing an Alemite 3575 series Control Handle complete with mechanical meter. It has been designed to accurately dispense, measure and control flow of engine oil, gear oil,
More informationCM-3120 (115-volt, NPT, Gallon or Litre) CM-3220 (230-volt, NPT, Gallon) CM-3260 (230-volt, BSPT, Litre) Heavy Duty Cabinet Model Fuel Transfer System
SAVE THESE INSTRUCTIONS CM-3120 (115-volt, NPT, Gallon or Litre) CM-3220 (230-volt, NPT, Gallon) CM-3260 (230-volt, BSPT, Litre) Heavy Duty Cabinet Model Fuel Transfer System Owner s Manual TABLE OF CONTENTS
More informationOperation and Maintenance Manual
BM / BMA Hydrometers ½ Operation and Maintenance Manual i This manual is intended for use by the users of this equipment. The information contained herein is the property of the Arad Ltd. Dalia and may
More informationINDUSTRIAL DYNAMICS CO
TS-150 Rev. B MP Oscillating Piston Flowmeter: 12.7 mm (1/2" Type MP) 25.4 mm (1" Type MP) 50.8 mm (2" Type MP) 76.2 mm (3" Type MP) TYPE MP OSCILLATING PISTON FLOWMETER 2 " Type MP with 800 Series Register,
More informationOperating and Maintenance Manual for Type S Flowmeters. M101 Rev. B Type S Flowmeters: 5 8, 3 4 and 1 with 157 & 600 Series Registers
Operating and Maintenance Manual for Type S Flowmeters M101 Rev. B Type S Flowmeters: 5 8, 3 4 and 1 with 157 & 600 Series Registers TABLE OF CONTENTS Installation & Operation... Page 1 Calibration...
More informationOperation, Installation, Maintenance and Repair Guide. HighFlo (HF) Control Handle. SERVICE BULLETIN SB 3097 Rev. A 6/14
SERVICE BULLETIN SB 3097 Rev. A 6/14 HighFlo (HF) Control Handle Model 3320-051...HF Non-Metered Control Handle w/rigid extension, Semi-Auto tip, & 3/4 Swivel Model 3320-052... HF Non-Metered Control Handle
More informationFM-300H and FM-300HR Electronic Disc Meter Owner s Manual
FM-300H and FM-300HR Electronic Disc Meter Owner s Manual 04/14 920679-06E To the owner Congratulations on receiving your GPI Electronic Disc Meter. We are pleased to provide you with a meter designed
More informationFLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS
GL-02 THE ENDLESS FLOODLIGHTS SITE LAMPS SPOTLIGHTS WORKLIGHTS HEAD LIGHTS FLASHLIGHTS 2 4 7 8 13 16 LED 27W FLOODLIGHT LED-511 1600 12V DC 24V DC Ideal for outdoor use on construction equipment, tractors,
More informationWelker Sampler. Installation, Operation, & Maintenance Manual. Model GSS-4HP
Installation, Operation, & Maintenance Manual Welker Sampler Model GSS-4HP The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct
More informationIntroduction. Installation. Maintenance. Bill of Materials
Table of Contents Introduction Specitications... 3 Operation... 4 Installation New Installations... 6 Retrofit Installations... 6 Flow Control Switch... 7 Dimensions... 8 E-7 Valve... 28 E-7 Valve with
More information12 French Drive Mono, ON Canada L9W 5W1 Ph Toll Free Fax
CONTROL HANDLES AND ELECTRONIC METERS 12 French Drive Mono, ON Canada L9W 5W1 Ph. 519-942-8800 Toll Free 1-800-252-5636 Fax 519-942-4799 info@appliedlubrication.com oil Electronic meter RAASM s electronic
More informationWelker Adjustable Probe with Check Valve and Welker Automatic Insertion Probe with Check Valve
a Installation, Operation, & Maintenance Manual Welker Adjustable Probe with Check Valve and Welker Automatic Insertion Probe with Check Valve Models AP-3MI & AIP-3MI The information in this manual has
More informationLM-300 Lube Meter. Owner s Manual East 36th Street North Wichita, KS USA TEL: FAX: /10. Rev.
LM-300 Lube Meter Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 06/10 Rev. C 92203401 To the owner Congratulations on receiving your GPI Lube
More informationOPERATOR S MANUAL X INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
OPERATOR MANUAL 635360-X INCLUDING: OPERATION, INTALLATION & MAINTENANCE ELECTRONIC PREET DIGITAL METER FOR UE WITH LUBRICATION FLUID RELEAED: 10-7-04 REVIED: 6-11-10 (REV. 03) READ THI MANUAL CAREFULLY
More informationRemote Dispensing Cabinet 902V Series Cabinet Dispenser
Owners Installation, Operation, and Safety Manual Remote Dispensing Cabinet 902V Series Cabinet Dispenser Models FR902R, non-ul, gallon FR902LR, non-ul, liter FR902RU, UL, cul listed, gallon FR902LRU,
More informationMR 5-30-RD Remote Dispenser
SAVE THESE INSTRUCTIONS MR 5-30-RD Remote Dispenser Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 Please contact GPI before returning any product.
More informationINSTRUCTION MANUAL MN7 series
Badger Meter Europa GmbH INSTRUCTION MANUAL MN7 series September 2001 Version MN7-09/01-e Content Content Page 1. To the owner 1 2. Important information 1 3. Installation 3 4. Operation 4 5. Electrical
More informationM4 Troubleshooting 42
43 81 119 157 M4 Troubleshooting 42 Certificate of compliance DECLARATION OF CONFORMITY The undersigned, representing the following manufacturer Piusi S.p.A. 46029 Suzzara (Mantova) - Italy CERTIFIES
More informationFM-530-RD Remote Dispenser
SAVE THESE INSTRUCTIONS 5252 East 36th Street North W ichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 FM-530-RD Remote Dispenser Owner s Manual Please contact GPI before returning any product.
More informationInside. Introducing GROZ Air - air control units. Air Regulators 05. Air Lubricators - Metal Bowl 09. Filter Regulator Combination 10.
Introducing GROZ Air - air control units ALUMINIUM DIE CAST BODY 01 02 WALL MOUNTING BRACKET FILTER UNIT 05 06 SINTERED BRONZE FILTERING ELEMENT (inside) 03 BUILT IN PIPING ADAPTERS PRESS TYPE MANUAL DRAIN
More informationLynx 3:1 Pump. Model: OPERATION, INSTALLATION, MAINTENANCE AND REPAIR GUIDE
SERVICE BULLETIN SB1101 Revision F 10/13 Lynx 3:1 Pump Model: 1110-007 Thoroughly read and understand this manual before installing, operating or servicing this equipment. OPERATION, INSTALLATION, MAINTENANCE
More informationBaumann Mikroseal Control Valve
Instruction Manual 81000 Valve Baumann 81000 Mikroseal Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Flow Direction...
More informationINSTRUCTION AND MAINTENANCE MANUAL GFH45 PRESSURE REGULATOR
Enidine / Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-7993 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet
More informationWP Series Hydraulic & Pneumatic Flow Monitors Illustrated Price List
Webtec Products Limited WP Series Hydraulic & Pneumatic Flow Monitors Illustrated Price List Another quality product from the Webster range Webtec Products Limited WP Series - Illustrated Price List 1.
More informationSeries TTMP PVC Electronic Totalizing Meter
Series TTMP PVC Electronic Totalizing Meter Series TTMP PVC Electronic Totalizing Meter TTMP Meter with Computer Display TTMP Digital Pulse Meter IMPORTANT NOTICE Use Series TTMP meter with water and other
More informationMiniature Soft Seat Fluid Pressure Regulator
Instruction Sheet P/N 1. Description The Nordson miniature soft seat fluid pressure regulator is designed for use with hydraulic and pneumatic medias. The regulator body and wetted parts are constructed
More informationWisdom Systems. SCR Urea/Adblue Transfer System. Operating Instructions. Outstanding Features. Chemical Transfer and Application Technology
DANGER - BEWARE Not for use with fluids that have a flash point below 100 F (37.8 C, i.e.: Petrol, alcohol, solvents). Refer to NFPA 325M (Fire Hazard Properties of Flammable Liquids, Fluids, Gases, and
More information:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:
trolley for drums 30-60 kg kit for drums 30-60 kg 35260 35250 37500 35249 35259 37499 35264 35254 37504 3:1 3:1 5:1 3:1 3:1 5:1 3:1 3:1 5:1 20 14 18 20 14 18 20 14 18 35076 35173 36073 35076 35173 36073
More informationTechcon Systems TS5540-MS Micro Spray Valves
Techcon Systems TS5540-MS Micro Spray Valves User Guide English Copyright OK International TABLE OF CONTENTS Page number 1. Safety... 3 2. Specifications... 4 3. Features... 5 4. Connecting the Valve...
More informationIn-Line Electronic Control Handle
SERVICE BULLETIN SB 3070 Rev. A 2/10 In-Line Electronic Control Handle Model # 3330-142 Rigid Extension Model # 3330-144 Flex 90 Extension Model # 3330-143 Flex Extension (shown) Model # 3120-067 In-Line
More informationDP3 Pump. 3:1, Air-operated, Oil. General. Operation. Technical Data. Installation R0 10/09. 35a 35b 35c
DP3 Pump 3:1, Air-operated, Oil General The DP3 Pump is a compressed air-operated piston reciprocating medium pressure pump. Suitable for medium flow transfer of high viscosity lubricants and for oil delivery
More informationELECTRIC DIESEL AND OIL PUMPS
ELECTRIC DIESEL AND OIL PUMPS DC DIESEL PUMPS 78 AC DIESEL PUMPS 79 COMPACT ASSEMBLIES 80 DIESEL PUMP ACCESSORIES 81 ELECTRIC OIL PUMPS 82 ELECTRIC OIL PUMPS WITH ELECTRONIC PRESSURE SWITCH 83 EQUIPPED
More informationDelTech Controls L.L.C.
DelTech Controls L.L.C. DelTorq Series 20 ACTUATORS TECHNICAL DATA SHEET T.D.S. NO. 20 105 / R1 ISSUE DATE : NOV 2004 INSTALLATION, OPERATION AND MAINTENANCE MANUAL Guarantee : ( Please read the entire
More informationQM Series Positive Displacement Fuel Meter
SAVE THESE INSTRUCTIONS QM Series Positive Displacement Fuel Meter Owner s Manual TABLE OF CONTENTS General Information...2 Installation...3 Operation...4 Calibration...5 Maintenance...5 Troubleshooting...6
More informationControl Valves/Meters Grease
Grease 740 WARNING Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726, 81795 Install as shown. Swivels Volume High-Pressure Swivels Model Description Thread Size 81728 Straight 1 /2" NPT(m) x
More informationLD Series Electronic Meters
LD Series Electronic Meters Manual and Preset Dispense Dispenses in gallons, quarts, pints and liters Easy to read LCD display with durable switches for long life Rugged engineered material for superior
More informationTYPE MP OSCILLATING PISTON FLOWMETER
TS-150 (G) TYPE MP OSCILLATING PISTON FLOWMETER Flow Rates of 3.8 to 1,140 Liters/Min. (1 to 300 gpm) Accuracy of ±0.5% of Rate ±0.1% Repeatability Magnetically Coupled Output Shaft Proven Reliable Oscillating
More informationFlojet Rewrites the Book on Small Pump Control
PATENT PENDING Variable Speed Means Constant Pressure FLOJET QUAD PUMP SENSOR CONTROL Flojet Rewrites the Book on Small Pump Control The new R4400 Sensor VSD provides pulse free constant pressure operation
More informationPositive Displacement Flowmeters GM020 series instruction manual
ACCURATE FLOWMETERS & INSTRUMENTATION PVT. LTD. Positive Displacement Flowmeters GM020 series instruction manual GM020 Pulse Meter From serial No. CXXXX Accurate Flowmeters & Instrumentation Pvt. Ltd.
More informationClean Water Made Easy
Clean Water Made Easy http://www.cleanwaterstore.com Pro-OX 2510 Manual Backwash Iron Filter Installation & Start-Up Guide Thank you for purchasing a Clean Water System! With proper installation and a
More informationUNIMIX EM. Operations Manual. Supplied by:
UNIMIX EM Operations Manual Supplied by: UNIMIX OPERATING MANUAL The UNIMIX was developed to meet the needs of all metalworking shops for accurate, automatic coolant metering and mixing: a need not met
More informationMOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 pumps
PUMPMASTER 2 oil pumps MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 pumps Kg. 000 000 Iquip iriuscidunt nosand niammeters ver ip fluidmodit dispense guns control valves for oil......................................................
More informationHG 20F-012E-01 OIL CONTROL GUN
HG 20F-012E-01 OIL CONTROL GUN INSTRUCTION MANUAL INTRODUCTION Thank you for purchasing a Macnaught oil dispensing gun complete with electronic meter. The Macnaught metered oil dispensing gun has been
More informationPaint/Solvent/Dump Valve and Flow-Through Valve
Instruction Sheet P/N 08573D Paint/Solvent/Dump Valve and Flow-Through Valve. Description See Figure. The paint/solvent/dump valve is a normally-closed valve that opens to trigger and/or dump coating material.
More informationTECHNICAL DATA CAUTION
Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.
More information2 PETROLEUM AND LP-GAS TANK TRUCK METERS
TS-250 Rev. E Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 4D-MT with Vapor Release,
More informationFlow rate l/min Burst pressure bar. ± 200 ± 200 ± 200 Accuracy ± 0,3 % ± 0,5 % ± 0,5 % Net weight kg
DIGITAL Meter Flow rate 35 l/min Flow rate 70 l/min Flow rate 40 l/min RAASM s digital meters, besides gauging the liquid delivered, can show instant flow rates, provide a reset total and allow the setting
More informationEP Series Electro-Pneumatic Preset Valve
EP Series Electro-Pneumatic Preset Valve Installation and Parts L I Q UID C O N T R O L S An IDEX Energy & Fuels Business LC_IOM_EPVALVE: V3: 03/17 PUBLICATION UPDATES AND TRANSLATIONS The most current
More informationControl Valves/Meters Grease
Grease 740 WARNING Lincoln Control Valves, Meters and Accessories Provide the Durability and Precision You Need for Your Lubrication Systems. Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726,
More informationFR1118- P10. User s Manual
FR1118- P10 User s Manual WARNING Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
More informationFLUID FLW FLW FLT FLT Diesel Transfer Equipments. USE AND MAINTENANCE MANUAL GB Rev.0
i FLUID Diesel Transfer Equipments FLW 40-12 FLW 40-24 FLT 40-12 FLT 40-24 USE AND MAINTENANCE MANUAL 533004 GB Rev.0 INDEX Safety Information pag. 2 Maintenance pag. 6 Declaration of Conformity pag. 3
More informationBennett Pump Company
Bennett Pump Company SB-100 Meters Operation, Service & Parts Manual Only Trained Personnel May Work on This Equipment For more information, please contact: Jim Biesecker, Component Sales 1218 E. Pontaluna
More informationWORKHORSE. Assembly / Operation Instructions / Parts
WORKHORSE S P R A Y E R S Assembly / Operation Instructions / Parts by, a Division of Green Leaf, Inc ATV 2522 MODEL # ATV 2522 DELUXE ATV 2 NOZZLE SPRAYER GENERAL INFORMATION WARRANTY / PARTS / SERVICE
More informationSV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L
SV1217-SS SPRAY VALVE O P E R AT I N G M A N U A L I&J FISNAR INC. 2003 GENERAL DESCRIPTION The SV1217-SS spray valve is operated by air pressure, providing precise deposit control for low to medium viscosity
More informationPROFESSIONAL GRADE FUEL TRANSFER PUMPS CATALOG
PROFESSIONAL GRADE FUEL TRANSFER PUMPS 2014-15 CATALOG ENGINEERED TO DELIVER Extended Duty Cycles PRO20-012 Get more done in less time with the powerful PRO20-012 Extended Duty Cycle exceeds the industry
More information2 PETROLEUM AND LP-GAS TANK TRUCK METERS
TS-250 Rev. D Refined Fuels PD Meters Size 2 Type 4-MT & 4D-MT 2 4-MT with Air Release, Strainer, Printing Register and Preset Valve 2 PETROLEUM AND LP-GAS TANK TRUCK METERS 2 4D-MT with Vapor Release,
More information0-800 psi Carbide Seat Fluid Pressure Regulator
Instruction Sheet P/N 0350C 0-800 psi Carbide Seat Fluid Pressure Regulator Description The Nordson 0-800 psi carbide seat fluid pressure regulator is designed for use with general liquid coatings. The
More informationfusion RF Control Handle
SERVICE BULLETIN SB3088 Rev B 04/15 fusion 2.4 - RF Control Handle Model 3331-021...2.4 GHz RF Control Handle Thoroughly read and understand this manual before installing, operating or servicing this equipment.
More information1/2" AIR DRIVEN DIAPHRAGM PUMP
1/2" DRIVEN DIAPHRAGM PUMP OPERATION AND SERVICE GUIDE O-1225D NOV. 2008 Page 1 of 6 Refer to Bulletin P-605, Parts List P-9151 DRIVEN, DOUBLE DIAPHRAGM PUMP MANUAL Congratulations on purchasing one of
More informationFoss Electric Milko-Scope II Meter Manual
Foss Electric Milko-Scope II Meter Manual General Description Adapted from the Technical Bulletin 16800-6GB November 1980 1. Measuring Principle The Milko-Scope meter collects a certain part of the total
More informationLM-300 Lube Meter. Owner s Manual East 36th Street North Wichita, KS USA TEL: FAX: /08. Rev.
LM-300 Lube Meter Owner s Manual 5252 East 36th Street North Wichita, KS USA 67220-3205 TEL: 316-686-7361 FAX: 316-686-6746 A Great Plains Ventures Subsidiary www.gpi.net 1-800-835-0113 08/08 Rev. A 92203401
More informationPRESSURE CONTROLS TECNORD
Pressure Reducing / Relieving Valves GPM PSI LPM BAR MODEL PAGE 1 4 38 276 DF-PRP 174 2 3 76 27 SK-PRP 176 1 4 38 276 DF-PWP 178 Typical Schematic Typical application for the PRP and PWP is multi-system
More informationIndustrial Turbo Meters, Sizes 2" through 6"
Industrial Turbo Meters Sizes 2" through 6" TUR-UM-00530-EN-19 (October 2014) User Manual Industrial Turbo Meters, Sizes 2" through 6" User Manual CONTENTS Scope of the Manual 5 Specifications 5 Product
More informationHEAVY DUTY ELECTRIC FUEL PUMPS 4 HEAVY DUTY HIGH FLOW ELECTRIC FUEL PUMP 6 ELECTRIC FUEL & OIL PUMPS 7 ELECTRIC DIESEL PUMPS 8
CAT 400 CATALOGUE CONTENTS ELECTRIC FUEL PUMPS HEAVY DUTY ELECTRIC FUEL PUMPS 4 HEAVY DUTY HIGH FLOW ELECTRIC FUEL PUMP 6 ELECTRIC FUEL & OIL PUMPS 7 ELECTRIC DIESEL PUMPS 8 MANUAL FUEL PUMPS INDUSTRIAL
More informationKDM ARMORED FLOW METER & SWITCH
KDM ARMORED FLOW METER & SWITCH Flow Pressure Level Temperature measurement monitoring control S2 Short Installation Length SS, PTFE or Hastelloy Wetted Parts Analog Output Available 110 F to + 390 F Temperature
More information105 Commerce Way Westminster, SC Tel: (864) Fax: (864)
ITT Conoflow 105 Commerce Way Westminster, SC 29693 Tel: (864) 647-9521 Fax: (864) 647-9574 WARNING Conoflow s products are designed and manufactured using materials and workmanship required to meet all
More informationCR4 Discrete Valve and Manifold Valve Repair or Replacement Procedure
P/N 01-1012769 REV. F 07/18 INSTRUCTION SHEET CR4 Discrete Valve and Manifold Valve Repair or Replacement Procedure Entegris CR4 valves and manifold valves can be repaired or replaced in the event of valve
More informationDP5 Pump. 5:1, Air-operated, Heavy Duty, Oil. General. Operation. Technical Data. Installation R1 09/10
DP5 Pump 5:1, Air-operated, Heavy Duty, Oil General The DP5 Pump is a compressed air-operated reciprocating piston medium pressure pump. These pumps are suitable for distribution of all types of light
More informationM-1115S Series Fuel Pump
SAVE THESE INSTRUCTIONS M-1115S Series Fuel Pump Owner s Manual TABLE OF CONTENTS General Information...2 Safety Instructions...2 Installation...3 Operation...4 Maintenance...5 Repair...5 Troubleshooting...9
More information0-500 PSI Soft Seat Fluid Pressure Regulator
Instruction Sheet P/N 0953A Description The Nordson 0-500 psi soft seat fluid pressure regulator is designed for use with nonabrasive liquid coatings. The regulator body is constructed of stainless steel
More informationOWNER S MANUAL. Model: TR-40-GAS ( ) (40 Gallon Lawn & Garden Trailer Sprayer w/5-nozzle Boom Assembly) Technical Specifications
OWNER S MANUAL Model: TR-40-GAS (5301339) (40 Gallon Lawn & Garden Trailer Sprayer w/5-nozzle Boom Assembly) Technical Specifications 40 Gal. Corrosion-Resistant Polyethylene Tank 5.5 HP Briggs & Stratton
More informationDIGITAL OIL PRESET METER OWNER S MANUAL
DIGITAL OIL PRESET METER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More information