Company Profile of Hangzhou Wulf Chain Co. Ltd.

Size: px
Start display at page:

Download "Company Profile of Hangzhou Wulf Chain Co. Ltd."

Transcription

1 Company Profile of Hangzhou Wulf Chain Co. Ltd.

2 Hangzhou Wulf Chain. 150Km 2

3 3.0 Industries Hangzhou Wulf Chain supplies 3

4 Escalator industry 4

5 Bulk material handling industry 5

6 Automotive industry 6

7 Steel industry 7

8 Palmoil Industry: 8

9 Other industries» Paper industry» Insulation material industry» Paver industry» Food industry» Tobacco industry» Power plant industry» Port machine industry» Bottle washing industry 9

10 4.0 Hangzhou Wulf Chain in detail 10

11 11

12 Plasma Cutting & Bending Plasma Cutting Bending 12

13 Turning & Grinding Turning Grinding 13

14 Punching & Milling Punching Milling 14

15 Hardening and Assembling Hardening Assembling 15

16 Ketten Wulf Chain Technology Technical documentation for Palmoil Industry 16 trust in technology

17 17

18 1.0 Ketten Wulf / HWC design and quality aspects 18

19 trust in technology Anti twisting flats 19

20 KettenWulf Round Riveting There will be NO loose link plates 20

21 Case Hardening and Heat Treatment in-house solution 21

22 Conveyor Chain Installation

23 Issues for installing the chain Tensioning Excessive tensioning will produce a rapid increase in the rate of wear. The chain can be checked by lifting it off the track at the mid point of the conveyor. A typical amount of lift would be 1.0% of the conveyor centre distance. For example, on a 20m conveyor, the lift should be about 200mm. 23

24 Issues for installing the chain - tensioning DRAWING SHOWING AMOUNT OF TENSION REQUIRED Requested Tension 200 mm 100 mm too tight 100 mm TOO TIGHT 300 mm too loose 300 mm TOO LOOSE 20 METRES 1% OF TOTAL LENGTH OF CONVEYOR 1% of the conveyor length gives best results 24

25 Issues for installing the chain - tracking Misaligned tracking Although we have now ensured that the components have been manufactured and assembled accurately chain damage can still occur if the tracking is misaligned 25

26 Issues for installing the chain - tracking Poor Alignment 26

27 Issues for installing the chain - tracking Good aligned Installation 27

28 3.0 Sprocket Installation 28

29 Issues for installing the sprockets If the chain has not been kept in correct adjustment and runs slack this will cause the wear of the sprocket 29

30 Issues for installing the sprockets To detect sprocket wear it is useful to check with a template to see the worn area 30

31 Issues for installing the sprockets Incorrect Sprocket Profile 31

32 Issues for installing the sprockets Poor Manufactured Sprocket 32

33 Issues for installing the sprockets Alignment of the sprockets Head sprockets must always be keyed as a matched pair. 33

34 Issues for installing the sprockets Examples of misalignment 34

35 4.0 Lubrication and Cleaning 35

36 Lubrication and Cleaning It is important that lubricant reaches the correct parts of the chain. Lubricant should be applied between the inner and outer linkplates above each pitch point this will ensure that the lubricant flows on to the bearing surface. 36

37 Lubrication and Cleaning Correct lubrication points 37

38 Chain Maintenance (Cleaning) The condition of a chain system needs to be checked on a regular basis thoughout the operation time to ensure any faults caused through dirt and other obects that don t belong to the chain. 38

39 Chain Maintenance (Cleaning) Chain in good cleaning condition 39

40 Chain Maintenance (Cleaning) We recommend special maintenance plans for documentation to ensure perfect running conditions. Inspection after Installation Weekly maintenance inspection Monthly maintenance inspection Yearly Maintenance inspection 40

41 Summary

42 Summary Trouble free running is a matter of: High specifications and improved design of the Chain Accurate manufacturing of Chains and Scrapper Good installation of Chains and Sprockets Regular routine maintenance Chains must be replaced as matched pairs 42

43 43 Sugar Industry

44 Sugar chains 44

45 Sugarcane chains 45

46 Sugarcane Chain 46

47 Diffuser chains 47

48 Diffuser Chains 48

49 Diffuser Chains 49

50 Bagasse Chains 50

51 51 Food Industry

52 Bakery chains 52

53 Bakery chains 53

54 Slaughterhouse chains 54

55 Slaughterhouse chains 55

56 Tobacco chains 56

57 Bottle washing chains 57

58 Bottle washing chains 58

59 Thank you for your attention! 59 Hangzhou Wulf Chain Co. Ltd. 40 Tangning Road Yunhe Town Yunhang District Phone: +86 (0) Fax: +86 (0)

DIAMOND ROLLER CHAIN. For Agricultural and Construction Equipment

DIAMOND ROLLER CHAIN. For Agricultural and Construction Equipment DIAMOND ROLLER CHAIN For Agricultural and Construction Equipment FABRICATION While roller chain would appear to be a simple product, the number of components in a ten foot section of 40 pitch chain totals

More information

Randy Recommends... If your bike has chain drive, here are some things you should know.

Randy Recommends... If your bike has chain drive, here are some things you should know. Chains part 1: Sizing Motorcycle drive chains are made up of alternating internal links and external links, connected by pins. The internal links consist of two plates connected to each other through two

More information

Your G3 buggy is fitted with three switches on the front part of the body:

Your G3 buggy is fitted with three switches on the front part of the body: CONTENTS Buggy operation... 3 General Maintenance... 5 Technical Maintenance... 6 Front wheel bearing replacement... 6 Rear wheel bearing replacement... 7 Chain replacement... 8 Chain Adjustment... 9 Brake

More information

INSTALLATION INSTRUCTIONS REAR STABILIZER BAR Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION 1 Threaded Plate Threaded

More information

SEPARATION OF TRAMP IRON AND FERRIC MATERIALS FROM SUGARCANE TO ACHIEVE EFFICIENT MILLING

SEPARATION OF TRAMP IRON AND FERRIC MATERIALS FROM SUGARCANE TO ACHIEVE EFFICIENT MILLING SEPARATION OF TRAMP IRON AND FERRIC MATERIALS FROM SUGARCANE TO ACHIEVE EFFICIENT MILLING JENEKAR G M 1, KARNE T M 2 and THANGAMUTHU P 3 1 Shri Guru Gobind Singhji College of Engineering and Technology,

More information

All DOHC Honda CB750s, CB900s and CB1100s

All DOHC Honda CB750s, CB900s and CB1100s Installation Instructions for: V &H Racing Curved Guide & AHM Cam Chain Tensioner All DOHC Honda CB750s, CB900s and CB1100s Models C, F and R Page 1 Introduction. Thank you for your purchase of the Vince

More information

Timing Belt Design Hints A guide to Timing Belt drives

Timing Belt Design Hints A guide to Timing Belt drives Timing Belt Design Hints A guide to Timing Belt drives Properties This table is provided to assist in specifying an Optibelt drive element for a particular drive application. Ambient temperature Maximum/minimum

More information

INSTRUCTION MANUAL FOR MODEL TAC - TRAY ACCUMULATOR CONVEYOR SYSTEM MONORAIL STYLE

INSTRUCTION MANUAL FOR MODEL TAC - TRAY ACCUMULATOR CONVEYOR SYSTEM MONORAIL STYLE INSTRUCTION MANUAL FOR MODEL TAC - TRAY ACCUMULATOR CONVEYOR SYSTEM MONORAIL STYLE - 1 - T A TABLE OF CONTENTS C 1. OPERATION 3 1.1. START INSTRUCTIONS 3 1.2. STOP INSTRUCTIONS 3 2. PREVENTIVE MAINTENANCE

More information

Electric Bike D9908, D9909, D9979, D9980, D9981, D9982, D9983 and D9984

Electric Bike D9908, D9909, D9979, D9980, D9981, D9982, D9983 and D9984 Electric Bike D9908, D9909, D9979, D9980, D9981, D9982, D9983 and D9984 Thank you for purchasing this product, which has been made to demanding high quality standards and is guaranteed for domestic use

More information

DRUM BRAKE RIMS Periodic inspection of drum brake rims is necessary to determine indications of uneven or excessive wear. In general, brake rim failures other that regular wear are caused by brake linings

More information

C - Engineered pin-bush conveyor chains and chain sprockets

C - Engineered pin-bush conveyor chains and chain sprockets C - Engineered pin-bush conveyor chains and chain sprockets 142 C - Engineered pin-bush conveyor chains and chain wheels DIN 8165 - DIN 8167 - DIN 8168 ( standard and according drawing ) - Chain sprockets

More information

The Importance Of Proper. Maintenance Inspections On Belt Conveyors

The Importance Of Proper. Maintenance Inspections On Belt Conveyors On Belt Conveyors By Neil Kinder & Charles Pratt Equipment Characteristics Irrespective of the material, the same type of conveyors are used, all using the same technology, operating principles, operating

More information

FMB-DDSP Belt for High Load and Low Load Pulleys

FMB-DDSP Belt for High Load and Low Load Pulleys FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30

More information

Incline Drag Conveyor Manual

Incline Drag Conveyor Manual Manufacturing, Inc. Incline Drag Conveyor Manual Manufacturing, Inc. 33 East 8th street Waconia, MN 55387 Phone-(952) 442-4450 Fax-(952) 442-5923 E-Mail-waconia@waconiamfg.com Web Site - waconiamfg.com

More information

DIAMOND CHAIN COMPANY INC. Maintenance Guide

DIAMOND CHAIN COMPANY INC. Maintenance Guide Maintenance Guide 2006 BULLETIN 1067 TABLE OF CONTENTS ORDERING INFORMATION 3 INSTALLATION 4 LUBRICATION 5 INSPECTIONS 6 ELONGATION LIMITS 7 WHAT IS CHAIN WEAR? Did you know Chain does not STRETCH? Chain

More information

MAINTENANCE INSTRUCTIONS

MAINTENANCE INSTRUCTIONS MAINTENANCE INSTRUCTIONS ECOMAT EASY / GIROTEC WRS Version G0101 ECOMAT EASY H / GIROTEC WRS H Version G0301 ECOMAT PLUS / ECOMAT PLUS H Versions G0503 / G0603 V 2.0 Table of contents 1/3 1.0 Maintenance

More information

OPERATIONS MANUAL LEVER CHAIN HOIST

OPERATIONS MANUAL LEVER CHAIN HOIST OPERATIONS MANUAL LEVER CHAIN HOIST IMPORTANT SAFETY INFORMATION Please read, understand and follow all safety information contained in these instructions prior to the use of this hoist. Retain these instructions

More information

PRODUCTS AND SERVICES 2017

PRODUCTS AND SERVICES 2017 PRODUCTS AND SERVICES 2017 www.wagears.com.au INTRODUCTION WA Gears Pty Ltd is a precision gear manufacturing company based in Henderson, Western Australia. We specialise in manufacturing gears and precision

More information

Chain guide. Chain guide

Chain guide. Chain guide Regular maintenance and lubrication are preconditions for low wear and long service life of the chain drive. The maintenance and lubrication frequency, as well as the related re-lubrication, are determined

More information

PO W ERCO N H A N D LIN G SYST EM S (PT Y) LT D.

PO W ERCO N H A N D LIN G SYST EM S (PT Y) LT D. POWERCON CR MONORAIL SYSTEM GUIDE About us: POWERCON HANDLING SYSTEMS specialises in complete overhead monorail conveyors as well as complete Turnkey Operation and Factory Automation projects. Established

More information

Owners Manual 1 E720

Owners Manual 1 E720 Owners Manual 1 E720 Training with E720 2 Contents 1. Contents of E720 Box. 2. E720 assembly instructions. 3. Tank filling and water treatment. 4. Long term water treatment and basic operation. As with

More information

POSITIVELY DRIVEN CONVEYOR BELTS

POSITIVELY DRIVEN CONVEYOR BELTS CONVEYOR BELTS www.mafdel-belts.com www.food-conveyor-belts.com GB CONFIGURATION HORIZONTAL CONVEYOR BIDIRECTIONAL CONVEYOR FLIGHTED AND SIDEWALL CONVEYOR TROUGHED CONVEYOR 3 ADVANTAGES Our positive drive

More information

Forged Chains & Sprockets

Forged Chains & Sprockets Forged Chains & Sprockets Forged Link Standard Series MN Grade Standard in stock MINIMUM ULTIMATE STRENGTH LB CHAIN No. PITCH T C S F R OD MN CN C CD S 420 JKF102Z 4 (102) 0.94 1.42 0.31 0.39 0.25 0.56

More information

high performance pin oven chain

high performance pin oven chain high performance pin oven chain introduction Brooks are the world s leading authority on the manufacture and supply of high performance pin oven chains to the Beverage Can Industry. Complimenting the chains

More information

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS

DRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can

More information

MAINTENANCE - LPX PORTABLE TREATER

MAINTENANCE - LPX PORTABLE TREATER MAINTENANCE - LPX PORTABLE TREATER Proper maintenance of the Portable LPV Treater is critical for peak performance, reliability and accuracy of this system. The following is a guideline for the type of

More information

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B

Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex

More information

Daily Maintenance Checklist for Series 1 Industrial Paper Shredder

Daily Maintenance Checklist for Series 1 Industrial Paper Shredder Daily Maintenance Checklist for Series 1 Industrial Paper Shredder Daily Cleaning Clean out cutterhead with compressed air (move cutters side to side while cleaning). Blow off entire machine. Daily Lubrication

More information

ULTRA LOW FRICTION SERIES

ULTRA LOW FRICTION SERIES PLASTIC CHAIN UMW Tsubaki Plastic Chain UMW Ultra Low Friction Series In recent years due to higher speed lines, smooth conveying of plastic bottles and paper drink containers and countermeasures for Caser

More information

Maintenance manual XT modules

Maintenance manual XT modules Maintenance manual XT modules Copyright FlexLink 2013 The contents of this publication are the publishers and may not be reproduced (even extracts) unless permission is granted. Every care has been taken

More information

INSTRUCTION MANUAL MAGNA RAIL

INSTRUCTION MANUAL MAGNA RAIL R ENGLISH NR. 148293 00 INSTRUCTION MANUAL MAGNA RAIL 1999-05-01 List of contents Declaration of conformity, CE Delivery check Mounting instruction (rail, trolley units) Mounting instruction (exhaust pipe,

More information

MAINTENANCE TECHNIQUES and GEAR UNIT FAILURE MODES. MIKE FIELD DAVID BROWN GEAR INDUSTRIES Revision 1

MAINTENANCE TECHNIQUES and GEAR UNIT FAILURE MODES. MIKE FIELD DAVID BROWN GEAR INDUSTRIES Revision 1 MAINTENANCE TECHNIQUES and GEAR UNIT FAILURE MODES MIKE FIELD DAVID BROWN GEAR INDUSTRIES Revision 1 Maintenance Regular maintenance saves money One hour per week of effort can save millions in lost production

More information

BS 2/K Transverse Conveyor

BS 2/K Transverse Conveyor Modular Transfer Systems BS 2/K Transverse Conveyor for TSplus Conveyors Installation and Maintenance Guide Publication Number: 8981 500 207 11/00 2 Table of Contents INTRODUCTION... 3 TECHNICAL DATA...

More information

Aerowerks Toll Free :

Aerowerks Toll Free : Toll Free : 888-774-1616 Fax : (905)-363-6998 URL: www.aero-werks.com 1 Aerowerks 2018 TABLE OF CONTENTS 1. OPERATION 3 1. START AND STOP INSTRUCTIONS 3 2. PREVENTIVE MAINTENANCE 4-6 2. PREVENTIVE MAINTENANCE

More information

Conveyor chain catalogue

Conveyor chain catalogue Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS

More information

POSITIVELY DRIVEN CONVEYOR BELTS

POSITIVELY DRIVEN CONVEYOR BELTS CONVEYOR BELTS www.mafdel-belts.com www.food-conveyor-belts.com GB CONFIGURATION HORIZONTAL CONVEYOR BIDIRECTIONAL CONVEYOR FLIGHTED AND SIDEWALL CONVEYOR TROUGHED CONVEYOR 3 ADVANTAGES Our positive drive

More information

7400 Series End Drive Conveyors

7400 Series End Drive Conveyors 700 Series End Drive Conveyors Installation, Maintenance and Parts Manual Flat Belt Conveyor Cleated Belt Conveyor DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-866

More information

NM-NP Pajero Rhino Heavy Duty - Two Bar Trackmount System

NM-NP Pajero Rhino Heavy Duty - Two Bar Trackmount System NM-NP Pajero Rhino Heavy Duty - Two Bar Trackmount System Parts List Important: Please read these instructions carefully prior to installation. Please refer to your fitting instruction to ensure that the

More information

Workshop Tips Steering Parts

Workshop Tips Steering Parts Workshop Tips Steering Parts Competence from the technology leader GKN Aftermarkets & Services is your preferred partner for driveline parts and systems, repair and maintenance, complete design and build

More information

Maintenance Safety. Jim Seay, ICAE Chairman, IAAPA Global Safety Committee President, Premier Rides Immediate Past Chair, ASTM F24

Maintenance Safety. Jim Seay, ICAE Chairman, IAAPA Global Safety Committee President, Premier Rides Immediate Past Chair, ASTM F24 Maintenance Safety Jim Seay, ICAE Chairman, IAAPA Global Safety Committee President, Premier Rides Immediate Past Chair, ASTM F24 August 30, 2016 Welcome Back! Overview Industry Growth in Asia Challenges

More information

Timing Chain Replacement and Riveting. Numbers in parentheses ( ) indicate a component or tool in the associated illustration.

Timing Chain Replacement and Riveting. Numbers in parentheses ( ) indicate a component or tool in the associated illustration. 1 of 5 4/9/2008 6:41 PM Home Account Contact ALLDATA Log Out Help Select Vehicle New TSBs Technician's Reference Component Search: METRO TOYOTA OK 1995 Mercedes Benz E 320 Cabriolet (124 Chassis) L6-3199cc

More information

Introduction. Exploded View. Conveyor System - Troubleshooting Guide LAST UPDATED: 09/19/2018

Introduction. Exploded View. Conveyor System - Troubleshooting Guide LAST UPDATED: 09/19/2018 LAST UPDATED: 09/19/2018 Introduction 1. 2. 3. 4. Conveyor Drive Motor Power Cord Conveyor Drive Shaft /Sprockets 5. Belt 6. Belt Tensioning Screws Exploded View 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

More information

Belt Conveyors Conveyors - Pallet Handling - Special Purpose Machinery

Belt Conveyors Conveyors - Pallet Handling - Special Purpose Machinery Belt Conveyors Conveyors - Pallet Handling - Special Purpose Machinery 2 BELT CONVEYORS FOR ANY APPLICATION FLEXIBLE, CUSTOMISED BELT CONVEYORS Australis Engineering has been designing and manufacturing

More information

PS42 - Plasma Swivel Manual Wall Mount Technical Sheet

PS42 - Plasma Swivel Manual Wall Mount Technical Sheet DESIGN HIGHLIGHTS Effortless, one handed operation; even with heavy screens Bracket allows perfect parallel tracking before screen is rotated Bi-directional swivel motion up to 60 Strong steel construction

More information

Series SK Straight running plastic chains

Series SK Straight running plastic chains Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines

More information

Renold Roller Chain products are available from

Renold Roller Chain products are available from Renold Roller Chain products are available from MARYLAND METRICS RENOLD Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142

More information

Maintenance and Repair

Maintenance and Repair Maintenance and Repair WARNING ALWAYS shut off the engine, remove key from ignition, make sure the engine is cool, and disconnect the spark plug and positive battery terminal from the battery before cleaning,

More information

DynaCon Instruction Manual

DynaCon Instruction Manual DynaCon Instruction Manual Table of Contents Technical Specification & Warranty.... 3 Construction, Benefits & Safe Operating Procedures... 4 Noise Levels... 5 Installation, Operation & Maintenance...

More information

Troubleshooter Guide.

Troubleshooter Guide. Troubleshooter Guide www.renold.com 2 I Renold Troubleshooter Product range Roller Chain British, ANSI, API, DIN, ISO and Works Standard Chains Adapted Chains Extended Pitch Chains Hollow Pin Chains Made

More information

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT & DIRECT DRIVE XB, HV, HVA, ADD, DDS, DDP

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT & DIRECT DRIVE XB, HV, HVA, ADD, DDS, DDP INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT & DIRECT DRIVE XB, HV, HVA, ADD, DDS, DDP The purpose of this manual is to aid in the proper installation and operation of the fans.

More information

Chain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.

Chain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only. ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal

More information

PRECISION ROLLER CHAIN AGRICULTURAL, STEEL PINTLE STEEL DETACHABLE CHAIN, T-BAR AND T-ROD WELDED STEEL CHAIN AND ATTACHMENTS...

PRECISION ROLLER CHAIN AGRICULTURAL, STEEL PINTLE STEEL DETACHABLE CHAIN, T-BAR AND T-ROD WELDED STEEL CHAIN AND ATTACHMENTS... TABLE OF CONTENTS PRECISION ROLLER CHAIN...1-34 AGRICULTURAL, STEEL PINTLE STEEL DETACHABLE CHAIN, T-BAR AND T-ROD...35-56 WELDED STEEL CHAIN AND ATTACHMENTS...57-61 STEEL BUSHED CHAIN AND ATTACHMENTS...62-67

More information

Serial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual

Serial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual Serial N... MX1 Chain Driven Pipe Cutting and Bevelling Machine Parts and Operating Manual Table of contents Section Description Page 1.0 General Information 2 2.0 Specification 2 2.1 General Specification

More information

Installation and Main te nance Manual. Model RB190, SB350, RBI190, & SBI350 Effective June, 2005

Installation and Main te nance Manual. Model RB190, SB350, RBI190, & SBI350 Effective June, 2005 Installation and Main te nance Manual Model RB190, SB350, RBI190, & SBI350 Effective June, 2005 Contents Warning Labels... 3 Receiving & Uncrating... 4 Installation Saftey...5 Assembly... 6 Set-Up... 7

More information

DEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance

More information

Cross Tensioners. Frames. Bearings. Springs. Mounting Holes. Adjustment Marks

Cross Tensioners. Frames. Bearings. Springs. Mounting Holes. Adjustment Marks Cross Tensioners Cross Tensioners provide constant belt or chain tension. Their automatic tensioning action translates into improved performance and extended life for most types of fixed-centre drives.

More information

PARTS & SERVICE MANUAL for RT-2VSE & RT-2VSHO TOASTER

PARTS & SERVICE MANUAL for RT-2VSE & RT-2VSHO TOASTER PARTS & SERVICE MANUAL for RT-2VSE & RT-2VSHO TOASTER Model RT-2VSE The information found in this manual will prove very helpful. Although the instructions are easy to follow, all repair procedures should

More information

750 Series Press Conveyor Installation and Maintenance Manual

750 Series Press Conveyor Installation and Maintenance Manual 750 Series Press Conveyor Installation and Maintenance Manual Metzgar Conveyor Co. - 2010 METZGAR CONVEYORS SAFETY PRECAUTIONS WARNING: DO NOT ATTEMPT MAINTENANCE ON ANY CONVEYORS WHILE IN OPERATION. BEFORE

More information

Conveyor Belt Specialist

Conveyor Belt Specialist Conveyor Belt Specialist Specialising in Conveyor & Modular Belting, we also offer a wide range of related products, from PVC Door Curtains to Motors & Gearboxes CONVEYOR BELTING MODULAR BELTING SPECIALIST

More information

Signature Overhead System INSTALLATION MANUAL

Signature Overhead System INSTALLATION MANUAL Signature Overhead System TM INSTALLATION MANUAL PACLINE Installation Manual Read All Instructions Carefully Proper installation is not difficult, and by adhering to the following procedures the conveyor

More information

SERVICE MANUAL Gearbox - Allison AT545 - Gearbox Installation

SERVICE MANUAL Gearbox - Allison AT545 - Gearbox Installation Gearbox - Allison AT545 - Gearbox Installation Oil level dipstick Gearbox oil cooler Auxiliary oil filter Modulator Page 3.4 Gearbox - Allison AT545 Checking Oil Level The dipstick and filler are situated

More information

Innovation First, Inc. EDU Mechanical Guide

Innovation First, Inc. EDU Mechanical Guide 11.8.2002 www.innovationfirst.com Page 2 Table of Contents 1. Identifying Mechanical Parts...2 2. Identifying Motion Parts...3 3. Identifying Hardware Parts...4 4. Cutting and Bending Metal Parts...5 5.

More information

User s Manual. Automatic Switch-Mode Battery Charger

User s Manual. Automatic Switch-Mode Battery Charger User s Manual Automatic Switch-Mode Battery Charger IMPORTANT Read, understand, and follow these safety rules and operating instructions before using this battery charger. Only authorized and trained service

More information

TABLE OF CONTENTS 0 FRONT DRIVE , WHEEL HUB , WHEEL HUB BEARING , KNUCKLE

TABLE OF CONTENTS 0 FRONT DRIVE , WHEEL HUB , WHEEL HUB BEARING , KNUCKLE Subsection 01 (TABLE OF CONTENTS) TABLE OF CONTENTS 0 FRONT DRIVE... 06-02-1 1, WHEEL HUB... 06-02-2 2, WHEEL HUB BEARING... 06-02-2, KNUCKLE... 06-02- FINAL DRIVE... 06-0-1 1, DRIVE CHAIN... 06-0-2 2,

More information

THIELE company profile

THIELE company profile Bucket-Elevator Chains THIELE company profile The THIELE company The THIELE Company was founded more than 75 years ago and is now one of the world s foremost chain manufacturers. THIELE s product line

More information

CHASSIS CONTENTS EXTERIOR PARTS 6-1 FRONT WHEEL 6-2 FRONT BRAKE 6-6 HANDLEBARS 6-12 REAR WHEEL 6-30 REAR BRAKE 6-34 REAR SHOCK ABSORBER 6-36

CHASSIS CONTENTS EXTERIOR PARTS 6-1 FRONT WHEEL 6-2 FRONT BRAKE 6-6 HANDLEBARS 6-12 REAR WHEEL 6-30 REAR BRAKE 6-34 REAR SHOCK ABSORBER 6-36 CHASSIS CONTENTS EXTERIOR PARTS 6-1 FRONT WHEEL 6-2 FRONT BRAKE 6-6 HANDLEBARS 6-12 FRONT FORK ( ) 6-14 FRONT FORK ( ) 6-20 STEERING 6-27 REAR WHEEL 6-30 REAR BRAKE 6-34 REAR SHOCK ABSORBER 6-36 6 SWING

More information

BULLETIN TESTING. Article from Honda Service News. DTC P0341: CMP Sensor A and CKP Sensor Incorrect Phase Detected. Troubleshooting Flowchart

BULLETIN TESTING. Article from Honda Service News. DTC P0341: CMP Sensor A and CKP Sensor Incorrect Phase Detected. Troubleshooting Flowchart 2005 Honda Truck CR-V 4WD L4-2.4L Vehicle > ALL Diagnostic Trouble Codes ( DTC ) > Testing and Inspection > P Code Charts > P0341 BULLETIN TESTING Article from Honda Service News DTC P0341: CMP Sensor

More information

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT DRIVE XBL FANS

INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT DRIVE XBL FANS INSTALLATION, OPERATION AND MAINTENANCE MANUAL WALL EXHAUST FANS BELT DRIVE XBL FANS The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended

More information

Forged Chains & Sprockets

Forged Chains & Sprockets Forged Chains & Sprockets Telephone: 309-698-9250 5 a CROMANT chain company FORGED CHAINS & SPROCKETS Cobalt Chains forged alloy fork link chain provides an excellent solution for the rigors of heavy duty

More information

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]

Series R/W ratio, minimum*** L-curves X X X X. Work load in curve [N] Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5

More information

CHASSIS CONTENTS EXTERIOR PARTS 7-1 FRONT WHEEL 7-2 FRONT BRAKE 7-6 HANDLEBARS 7-13 FRONT FORK 7-15 STEERING 7-23 REAR WHEEL 7-26 REAR BRAKE 7-30

CHASSIS CONTENTS EXTERIOR PARTS 7-1 FRONT WHEEL 7-2 FRONT BRAKE 7-6 HANDLEBARS 7-13 FRONT FORK 7-15 STEERING 7-23 REAR WHEEL 7-26 REAR BRAKE 7-30 CHASSIS CONTENTS EXTERIOR PARTS 7- FRONT WHEEL 7-2 FRONT BRAKE 7-6 HANDLEBARS 7-3 FRONT FORK 7-5 STEERING 7-23 REAR WHEEL 7-26 REAR BRAKE 7-30 REAR SHOCK ABSORBER 7-32 SWING ARM 7-33 7 7- CHASSIS EXTERIOR

More information

5683EN. Conveyor system WL. Conveyor assembly manual. Created by EBCCW 00:06

5683EN. Conveyor system WL. Conveyor assembly manual. Created by EBCCW 00:06 Created by EBCCW 00:06 by EBCCW 96:05 00:06 5683EN Conveyor system WL Conveyor assembly manual Created by EBCCW 96:05 00:06 Created by EBCCW 00:06 by EBCCW 96:05 00:06 5683EN Conveyor system WL Created

More information

AUTOMATIC FOODSERVICE EQUIPMENT. AUTOMATIC ELECTRIC BROILER MODELS 952E, 932E and 922E OWNER S MANUAL

AUTOMATIC FOODSERVICE EQUIPMENT. AUTOMATIC ELECTRIC BROILER MODELS 952E, 932E and 922E OWNER S MANUAL AUTOMATIC FOODSERVICE EQUIPMENT AUTOMATIC ELECTRIC BROILER MODELS 952E, 932E and 922E OWNER S MANUAL IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE. FOR YOUR SAFETY: Do not store or

More information

TABLE OF CONTENTS INSTALLATION & OPERATING INSTRUCTION MANUAL FOR MODEL PRC-- POWER ROLLER CONVEYOR

TABLE OF CONTENTS INSTALLATION & OPERATING INSTRUCTION MANUAL FOR MODEL PRC-- POWER ROLLER CONVEYOR TABLE OF CONTENTS INSTALLATION & OPERATING INSTRUCTION MANUAL FOR MODEL PRC-- POWER ROLLER CONVEYOR 1. INSTALLATION 2 1.1. GENERAL INSTALLATION 2 1.1.1. Building Connections 3 2. OPERATION 3 2.1. GENERAL

More information

REASONS YOUR BEARINGS WILL FAIL. Ritbearing CORPORATION

REASONS YOUR BEARINGS WILL FAIL. Ritbearing CORPORATION 12 REASONS YOUR BEARINGS WILL FAIL Ritbearing Things break. No matter what you do, there is always a chance that products you own will fail. The same holds true for bearings, but that doesn t mean that

More information

Conveyor Chain.

Conveyor Chain. Conveyor Chain www.renold.com 2 I Renold Conveyor Chain Catalogue Renold Chain Product Range Roller Chain British, ANSI, API, DIN, ISO and Works Standard Chains Adapted Chains Extended Pitch Chains Hollow

More information

Sub Section Title Page No.

Sub Section Title Page No. Sub Section Title Page No. 1 Introduction 3 2 Routine Maintenance 3 3 Disassembly 4 3.1 Disassembly of Double Crank Design 4 3.2 Disassembly of Scotch Yoke Design 5 3.3 Disassembly of Actuator Cylinder

More information

Technical Manual. Inspection Record For: Hoist Model No.: Hoist Serial No.: Hoist Inspection and Maintenance Guide

Technical Manual. Inspection Record For: Hoist Model No.: Hoist Serial No.: Hoist Inspection and Maintenance Guide CPTEN-136 Technical Manual Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model No.: Hoist Serial No.: WARNING! Failure to follow these inspection procedures can cause personal injury

More information

STEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment

STEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next

More information

ROSTA Tensioner Devices

ROSTA Tensioner Devices 33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as

More information

Strong. Powerful. Even Better Performance.

Strong. Powerful. Even Better Performance. Strong. Powerful. Even Better Performance. www.renoldjeffrey.com 2 I Renold Synergy Chain Renold Synergy Simply the best Synergy was created to meet a specific requirement of our customers: Improved chain

More information

LX1 Inspection Manual for Model LX1B. Table of contents 1. INSPECTION CLASSIFICATION DAILY INSPECTION FREQUENT INSPECTION...

LX1 Inspection Manual for Model LX1B. Table of contents 1. INSPECTION CLASSIFICATION DAILY INSPECTION FREQUENT INSPECTION... KTI KITO Technical Information LX1 Inspection Manual for Model LX1B LX1-1.1.1 1 / 9 Edition: C 03.06 Table of contents 1. INSPECTION CLASSIFICATION...2 2. DAILY INSPECTION...3 3. FREQUENT INSPECTION...3

More information

INSTALLATION AND MAINTENANCE MANUAL DRAG CHAIN CONVEYOR MODEL DC-60

INSTALLATION AND MAINTENANCE MANUAL DRAG CHAIN CONVEYOR MODEL DC-60 INSTALLATION AND MAINTENANCE MANUAL DRAG CHAIN CONVEYOR MODEL DC-60 Version 2014.1 - - TABLE OF CONTENTS INTRODUCTION Receiving, Inspection and Uncrating... 3 Ordering Replacement Parts... 3 SAFETY INFORMATION

More information

RolsplicerTM. Maintenance Manual And Illustrated Parts List

RolsplicerTM. Maintenance Manual And Illustrated Parts List RolsplicerTM Maintenance Manual And Illustrated Parts List List of Illustrations Figure Page. Rolsplicer 3 2. Roller Adjustment 4 3. Rolsplicer 6 4. Lid Hold Down Assembly 8 5. Automatic Lid Speed Adjustment

More information

The HKK Solid Advantage

The HKK Solid Advantage The HKK Solid Advantage HKK Chain, with its cold-forged, solid bushings, solid rollers, and specially treated pins and bushings provides a unique advantage over conventional chains. HKK s cold forging

More information

carriages to carry the load (taking into account any moment loads). Unlike the N series sliders these CS sliders do not have protective side seals.

carriages to carry the load (taking into account any moment loads). Unlike the N series sliders these CS sliders do not have protective side seals. Light Duty Sliders, size 18 no side seal, front fixing Long Linear s L1918.CS Material Zinc plated steel body. Steel rollers (100Cr6) with metal (2Z) or rubber (2RS) seals. Technical notes To be used with

More information

INSTRUCTION MANUAL FOR MODEL PRC POWER ROLLER CONVEYOR

INSTRUCTION MANUAL FOR MODEL PRC POWER ROLLER CONVEYOR INSTRUCTION MANUAL FOR MODEL PRC POWER ROLLER CONVEYOR - 1 - TABLEOFCONTENTS 1. OPERATION 3 1.1. GENERAL DESCRIPTION 3 1.2. OPERATION 3 1.2.1. GENERAL INSTRUCTIONS 3 2. MAINTENANCE 4 2.1. CHAIN TAKEUP

More information

ASSEMBLY STEP ONE STEP TWO STEP THREE STEP FOUR STEP FIVE

ASSEMBLY STEP ONE STEP TWO STEP THREE STEP FOUR STEP FIVE ASSEMBLY STEP ONE Attach the front [18] and rear feet [14] to the frame using the nuts [8], washer [9] and bolts [10]. STEP TWO STEP THREE STEP FOUR STEP FIVE Attach the handlebar post [22] inserting into

More information

AUTOMATIC FOODSERVICE EQUIPMENT. AUTOMATIC ELECTRIC BROILER MODELS 824E & 850E and 624E & 650E. B-Series Broiler OWNER S MANUAL

AUTOMATIC FOODSERVICE EQUIPMENT. AUTOMATIC ELECTRIC BROILER MODELS 824E & 850E and 624E & 650E. B-Series Broiler OWNER S MANUAL AUTOMATIC FOODSERVICE EQUIPMENT AUTOMATIC ELECTRIC BROILER MODELS 824E & 850E and 624E & 650E B-Series Broiler OWNER S MANUAL FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors or

More information

GARAGE DOOR OPENER OWNER S MANUAL S3/S4

GARAGE DOOR OPENER OWNER S MANUAL S3/S4 GARAGE DOOR OPENER OWNER S MANUAL S3/S4 Features! Locking door during power failure: If power failure occurs while the door is operating, the door can be released by pulling the clutch down, allowing

More information

Links. Kg/ft (W) Of 1. Unit CC ,850 3, Links. Of 1. Unit. Chain

Links. Kg/ft (W) Of 1. Unit CC ,850 3, Links. Of 1. Unit. Chain s Stainless Steel Milk Crate Finer Power Transmissions stocks a range of economy Stainless Steel chain in British Standard, American Standard and Double. This economy range of Stainless Steel chain offers

More information

Flexco SR Rivet Hinged Installation

Flexco SR Rivet Hinged Installation Flexco SR Rivet Hinged Installation with the Hilti DX 460-SR Powder Actuated Tool www.flexco.com General Safety Rules Save These Instructions Signal words: DANGER indicates an imminently hazardous situation

More information

Instructions for Testing and Installing a Voltage Regulator

Instructions for Testing and Installing a Voltage Regulator Instructions for Testing and Installing a Voltage Regulator For Jubilee/NAA, Hundred series, B-ckt system (Also known as INTERNALLY GROUNDED FIELD ) NOTE: does NOT apply to 9N, 2N, 8N systems Installing

More information

UNITIZED WHEEL END MAINTENANCE

UNITIZED WHEEL END MAINTENANCE UNITIZED WHEEL END MAINTENANCE SCOPE SKF LUNAR ADH range consists of a cartridge (THU1) bearing unit. This bearing is permanently sealed and lubricated, and the bearing is not serviceable. While the LUNAR

More information

Operating & Maintenance Manual For Steam Conditioning Valve

Operating & Maintenance Manual For Steam Conditioning Valve For Steam Conditioning Valve 1 Table of Contents 1.0 Introduction 3 2.0 Product description 3 3.0 Safety Instruction 4 4.0 Installation and Commissioning 5 5.0 Valve Disassembly 6 6.0 Maintenance 6 7.0

More information

ASSIST & TRANSIT. osd USER MANUAL TABLE OF CONTENTS

ASSIST & TRANSIT. osd USER MANUAL TABLE OF CONTENTS osd ASSIST & TRANSIT USER MANUAL TABLE OF CONTENTS 1. Key Specifications 2. List of Components 3. Assembly & Use 4. Troubleshooting 5. Care & Maintenance 6. Warnings 7. Warranty 8. Compliance. Service

More information

Before equipment use, please read this operation manual carefully. Serial Number: Date Purchased:

Before equipment use, please read this operation manual carefully. Serial Number: Date Purchased: Pushed & Geared Trolleys OPERATION MANUAL This operation manual is intended as an instruction manual for trained personnel who are in charge of installation, maintenance, repair etc. Before equipment use,

More information

chain sprocket SIMPLEX DUPLEX TRIPLEX

chain sprocket SIMPLEX DUPLEX TRIPLEX chain sprocket SIMPLEX DUPLEX TRIPLEX CHAIN SPROCKET DRIVE The Transmission of mechanical power without slippage and with a high degree of maintained efficiency is a basic function of the Roller Chain

More information

Best Diversified Products Ltd. Mobile Vehicle Loader/Unloader with Powerflex Tongue. Product Manual

Best Diversified Products Ltd. Mobile Vehicle Loader/Unloader with Powerflex Tongue. Product Manual Best Diversified Products Ltd. Mobile Vehicle Loader/Unloader with Powerflex Tongue Product Manual Best Diversified Products, Limited. Brunel Road, Earlstrees Industrial Estate, Corby, Northants. NN17

More information

RACK JACK. Synchronous Lifting Systems

RACK JACK. Synchronous Lifting Systems RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion

More information