MIG Guns, MIG Consumables & Welding Accessories Catalog

Transcription

1 MIG Guns, MIG Consumables & Welding Accessories Catalog tweco.com

2 Make the Switch. Increase Productivity. TWECO ADVANTAGE TWECO MIG GUN PORTFOLIO TWECO OFFERS SUPERIOR FEATURES AND BENEFITS TWECO TRUST TWECO ADVANTAGE. TWECO TRUST.

3 Professional MIG Welding Products & Accessories Professional MIG Welding Consumables Table of Contents WeldSkill MIG Guns & Consumables Professional Manual Welding Products & Accessories WeldSkill Manual Welding Products & Accessories Customer Care Numbers

4 4 MIG Welding Products & Accessories Solid Wire Mild Steel and Stainless Steel Flux cored Wire Wire Diameter in.(mm) MIG Gun Selection Guide Amperage Range >400 Wire Amperage Range Diameter in.(mm) >450 Solid Wire Aluminum Recommended Recommended Alternate Wire Amperage Range Diameter Recommended Alternate in.(mm) Alternate U.S. Customer Care: / FAX Canada Customer Care: / FAX

5 Which MIG Gun Is Right For You? Spray Master Professional No. Amperage Range Available Lengths (Feet) PulseMaster Compact Eliminator International Customer Care: / FAX Handle Design Cablehoz Connection Standard Eliminator TUFF-N-LITE SUPRA XT Smoke Master FLUXCORED SEFC Series Eliminator Spool Gun Rear End Connector Options Air-Cooled/ Water-Cooled PullMaster PulseMaster SUPRA Standard Water-cooled Special Features 5MIG Welding Products & Accessories

6 6 MIG Welding Products & Accessories SPRAY MASTER MIG GUN SERIES FEATURES & BENEFITS Operator appeal and reduces operator fatigue Field repairable Lower heat in the handle and conductor tube Standard gun configurations options Wide welding applications Lower inventory carrying costs MODEL Current (Amps) OUTPUT PROCESS STANDARD OPTIONS APPLICATION Duty Cycle Mixed Gas Wire Diameter in. (mm) Spray Master 250 Amp Spray Master 350 Amp Spray Master 450 Amp MIG Aluminum Flux-Cored Gas Shielded Flux-Cored Self Shielded Dual Schedule Locking Trigger Rear Connector Knucklehead Flexible Conductor Tube Light Duty Fab Medium Duty Fab Heavy Duty Fab U.S. Customer Care: / FAX Canada Customer Care: / FAX

7 SPRAY MASTER SERIES HANDLE DESIGN & STYLE PERFORMANCE DURABILITY EASE OF USE Optional Dual Schedule On/Off control with your gloved thumb (350 and 450 Amp only) Identified with DSRS Part No. suffix Thick-walled, three-layer conductor tube for higher electrical conductivity, act as heat sink, and durable Heavy-duty thick-walled contact tip and diffuser increases tip life and decreases downtime with tip changes Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue Extended trigger length to keep hand away from the arc to reduce radiated heat Optional mechanical locking trigger - Identified with "LC" Part No. suffix International Customer Care: / FAX Steel spring strain relief provides support to the cablehoz coming out the rear of the handle to minimize wire feed issues 7MIG Welding Products & Accessories

8 8 MIG Welding Products & Accessories Spray Master 250 Amp 80% Duty Cycle, Mixed Gases TWECO* STYLE REAR CONNECTOR MS MS MS MS MS MILLER STYLE REAR CONNECTOR MS210M-3545 MS212M-3545 MS215M-3545 MS220M-3545 MS225M-3545 LINCOLN STYLE REAR CONNECTOR MS212L-3545 EURO-KWIK STYLE REAR CONNECTOR MS210X-3545 MS212X-3545 MS215X-3545 MS225X-3545 NOZZLES HD22 Series EL22I Series EL22CT Series EL24CT Series CONTACT TIPS 11H Series EL16 Series 14 Series 16S Series EL16 Series 14 Series 16S Series EL16 Series GAS DIFFUSERS CONDUCTOR TUBE MS63 Series HD52-11 EL EL52CT EL52CT-14 EL52CT STANDARD OPTIONAL U.S. Customer Care: / FAX Canada Customer Care: / FAX

9 Spray Master 350 Amp 80% Duty Cycle, Mixed Gases TWECO* STYLE REAR CONNECTOR MS MS MS MS K4 MS DSRS LINCOLN STYLE REAR CONNECTOR MS312L-116 MS315L-116 MS315L-116K4 MS315L-116DSRS MILLER STYLE REAR CONNECTOR MS310M-116 MS312M-116 MS315M-116 MS315M-116K4 MS315M-116DSRS MS325M-116 EURO-KWIK STYLE REAR CONNECTOR MS315X-116 NOZZLES CONTACT TIPS GAS DIFFUSERS CONDUCTOR TUBE 16S Series EL52CT-16 EL22CT Series HD22 Series EL22I Series 14 Series EL16 Series 11H Series EL16 Series 14 Series 16S Series International Customer Care: / FAX EL52CT-14 EL52CT HD52-11 EL STANDARD OPTIONAL MS63 Series 9MIG Welding Products & Accessories

10 MIG Welding Products & Accessories Spray Master 450 Amp 80% Duty Cycle, Mixed Gases TWECO* STYLE REAR CONNECTOR MS MS MS MS K4 MS DSRS MS LM MS MS MILLER STYLE REAR CONNECTOR MS410M-116 MS412M-116 MS415M-116 MS415M-116K4 MS415M-116DSRS MS415M-116LC MS415M-116LM MS420M-116 MS420M-116DSRS MS425M-116 MS425M-116DSRS LINCOLN STYLE REAR CONNECTOR EURO-KWIK STYLE REAR CONNECTOR MS410L-116 MS415L-116 MS415L-116K4 MS415L-116DSRS MS415L-116LC MS415L-116LM MS425L-116 MS410X-116 MS412X-116 MS415X U.S. Customer Care: / FAX Canada Customer Care: / FAX

11 24CT / 24FN Series NOZZLES HD24 Series 24A Series 34CT / 34FN 23 Series 34A CONTACT TIPS 16S Series EL16 Series GAS DIFFUSERS CONDUCTOR TUBE MS64H Series 14 Series 14 Series 16S Series HD54-16 MS54-16H HD54-EL HD A 54A-16 STANDARD OPTIONAL SLR 100 SURGE LIMITING REGULATOR FOR USE WITH SHIELDING GAS MIG Welding Products & Accessories SLR 100 SURGE LIMITING REGULATOR Part No International Customer Care: / FAX

12 MIG Welding Products & Accessories Spray Master Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

13 SPRAY MASTER MIG GUN REPLACEMENT PARTS LIST (PART NO. / STOCK NO.) # DESCRIPTION 250 Amp 350 Amp 450 Amp Refer to Pages Refer to Pages Refer to Pages J-3 Refer to Pages MS84 MS84LC MS84DSRS ELC124FM 122FMS MS94RSW ELC94-BL ELC94 MS94LC 136 MS144 MS210 MS310 MS212 MS312 MS215 MS315 MS225 MS325 MS210X MS310X MS212X MS312X MS215X MS315X MS225X MS325X 235RSSR MS102-RK MS104-RK EPG172-H HK 172X-M 174X-M C6RC X6RC MS354-DSM Refer to Page 84 Refer to Pages TCR50 66J-3 MS410 MS412 MS415 MS425 MS410X MS412X MS415X MS425X MIG Welding Products & Accessories International Customer Care: / FAX

14 MIG Welding Products & Accessories PROFESSIONAL NO. MIG GUN SERIES FEATURES & BENEFITS Operator appeal Durable & dependable for industrial applications Field repairable Improved performance with longer life consumables Lower inventory carrying costs MODEL Current (Amps) OUTPUT PROCESS STANDARD OPTIONS APPLICATION Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Flux-Cored Gas Shielded Flux-Cored Self Shielded Dual Schedule Locking Trigger Rear Connector Knucklehead Flexible Conductor Tube Light Duty Fab Medium Duty Fab Heavy Duty Fab Professional Choice No. 1 Professional Choice No. 2 Professional Choice No. 3 Professional Choice No. 4 Professional Choice No. 5 Professional Choice No. 6 MINI-MIG 160 Amp 14 U.S. Customer Care: / FAX Canada Customer Care: / FAX

15 PROFESSIONAL NO. SERIES HANDLE DESIGN & STYLE PERFORMANCE DURABILITY EASE OF USE Wide selection of front end consumables available to fit the needs of the application Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip Gun hanger located at the bottom for ease of resting gun when not in use Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position Steel spring strain relief provides support to the cablehoz coming out the rear of the handle to minimize wire feed issues Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle MIG Welding Products & Accessories Two (2) ball-point screws are used to secure the Cablehoz and conductor tube in place Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged International Customer Care: / FAX

16 MIG Welding Products & Accessories Professional No Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR MILLER STYLE REAR CONNECTOR M M M LINCOLN STYLE REAR CONNECTOR L EURO-KWIK STYLE REAR CONNECTOR X X X NOZZLES 21 Series CONTACT TIPS 11 Series EL11 Series GAS DIFFUSERS EL51 CONDUCTOR TUBE 61 Series REL21 Series QTRW Series Series 14 Series Series Series A Series 34A 14 Series STANDARD HD22 Series 11 Series OPTIONAL 16 U.S. Customer Care: / FAX Canada Customer Care: / FAX

17 Professional No Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR Knucklehead Flexible** Conductor Tube Option K TWECO* STYLE REAR CONNECTOR 212FN-4045 LINCOLN STYLE REAR CONNECTOR L L L MILLER STYLE REAR CONNECTOR Knucklehead Flexible** Conductor Tube Option M M M M M M M K4 EURO-KWIK STYLE REAR CONNECTOR X X X EURO-KWIK STYLE REAR CONNECTOR X212FN-4045 X215FN-4045 MIG Welding Products & Accessories International Customer Care: / FAX

18 MIG Welding Products & Accessories NOZZLES 22 Series 24A Series HD22 Series 21 Series 23 Series CONTACT TIPS GAS DIFFUSERS 14 Series A 14 Series 11 Series 11 Series 14 Series CONDUCTOR TUBE Manual Welding Products & Accessories Tweco offers a complete line of ground clamps, cable connectors, and cable lugs for your welding application. Refer to pages in this catalog for more detail. 52FN 52HD FN STANDARD OPTIONAL 62J Series 18 U.S. Customer Care: / FAX Canada Customer Care: / FAX

19 Professional No Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR MILLER STYLE REAR CONNECTOR M M M LINCOLN STYLE REAR CONNECTOR EURO-KWIK STYLE REAR CONNECTOR L L L X X NOZZLES 23 Series CONTACT TIPS 14 Series 16S Series GAS DIFFUSERS 54A 54A-16 CONDUCTOR TUBE 63J Series MIG Welding Products & Accessories 14 Series HD54-14 HD24 Series 16S Series HD54-16 EL Series HD54-EL 24A Series 34A 14 Series 54A 24CT / 24FN Series 34CT / 34FN 16S Series 54A-16 STANDARD OPTIONAL International Customer Care: / FAX

20 MIG Welding Products & Accessories Professional No Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR Knucklehead Flexible** Conductor Tube K4 Option TWECO* STYLE REAR CONNECTOR DS DS LINCOLN STYLE REAR CONNECTOR L L L Knucklehead Flexible** Conductor Tube Option L K4 L L L MILLER STYLE REAR CONNECTOR M M M Knucklehead Flexible** Conductor Tube M K4 Option M M M M M M M M EURO-KWIK STYLE REAR CONNECTOR X X X X X EURO-KWIK STYLE REAR CONNECTOR X412FN-116 ** 20 U.S. Customer Care: / FAX Canada Customer Care: / FAX

21 24CT / 24FN Series NOZZLES 24A Series 24AH Series 34CT / 34FN 23 Series 23H Series HDL24L Series HD24 Series HD24LB Series Metal Working Chemicals 34A CONTACT TIPS 14 Series 16S Series 16S Series EL16 Series 14 Series GAS DIFFUSERS CONDUCTOR TUBE Metal working chemicals are available from Arcair. Full line of anti-spatter compounds, aluminum cleaners, and zinc-rich cold galvanizing compound. Contact Tweco Customer Care at for more details. 54A 54A-16 HD54-16 HD54-EL HD54-14 STANDARD OPTIONAL 64J Series MIG Welding Products & Accessories International Customer Care: / FAX

22 MIG Welding Products & Accessories Professional No Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR LINCOLN STYLE REAR CONNECTOR L MILLER STYLE REAR CONNECTOR M EURO-KWIK STYLE REAR CONNECTOR X NOZZLES CONTACT TIPS GAS DIFFUSERS 15H Series 25CT Series 35CT 55 Series CONDUCTOR TUBE 65J Series 25I Series 16S Series 55S-SW STANDARD OPTIONAL 22 U.S. Customer Care: / FAX Canada Customer Care: / FAX

23 Professional No Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR CT Series NOZZLES 36CT 26I Series CONTACT TIPS 16S Series MILLER STYLE REAR CONNECTOR M GAS DIFFUSERS 56S Series STANDARD OPTIONAL CONDUCTOR TUBE 66J Series MIG Welding Products & Accessories International Customer Care: / FAX

24 MIG Welding Products & Accessories Professional #1, #2, #3, #4, #5 and #6 MIG-Gun Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

25 PROFESSIONAL #1, #2, #3, #4, #5 AND #6 MIG-GUN REPLACEMENT PARTS # DESCRIPTION #1 #2 #3 #4 #5 #6 Refer to Pages Refer to Pages Refer to Pages Refer to Pages Refer to Pages A 85 7 N/A 84DS N/A 122FM 124FM 244DS 244 N/A 244LK N/A R 91C 92C 94C N/A 94LK-DS N/A 94L 101R SPR SPR SPR SPR RSSR R6RC X6RC MS354-DSM 194DS X-M 174X-M M170-2H M170-4H Refer to Page 84 Refer to Pages TCR X-M M170-5H 600S MIG Welding Products & Accessories International Customer Care: / FAX

26 MIG Welding Products & Accessories Dennis Cook DAE Fabrication Manager MAKING THE SWITCH. DAE Industries designs, fabricates and installs aircraft engine stands, maintenance stands and structures for aircraft maintenance tooling. The Louisville based company has approximately 40 welding and fabrication stations, and is always looking for ways to increase productivity. Recently, DAE and its welders compared their MIG guns to the Tweco Spray Master MIG gun. The extended trigger on the handle keeps my hand away from the heat of the arc, commented Jason Burns, a top DAE Welder. The gun doesn t overheat, so I can remain productive. They were so impressed by its ability to handle demanding conditions that they converted all their MIG guns to the Tweco Spray Master model. After making the switch, DAE reported seeing instant improvements in productivity. The Spray Master MIG gun has proven to be extremely dependable and tough, with zero failures to date. And we ve experienced a 60-70% increase in total consumable life, which has created less downtime when changing out parts, says DAE Fabrication Manager, Dennis Cook. With the Spray Master MIG guns, DAE saw a decrease in welder fatigue and an increase in consumable parts life. For a company wanting to improve productivity, it seems switching to Tweco was the right choice. DAE INDUSTRIES Louisville, KY Dennis Cook and the welders at DAE Industries carry the torch will you? THERMADYNE, A GLOBAL CUTTING AND WELDING LEADER, joins the American Welding Society in encouraging individuals to practice the art, craftsmanship and professions of welding, metalworking and fabrication. Victor, Thermal Dynamics, Thermal Arc, Arcair, Tweco, Stoody, Cigweld and TurboTorch are among the Thermadyne family of brands that you can count on for safety, reliability and quality U.S. Customer Care: / FAX Canada Customer Care: / FAX

27 MINI-MIG 160 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR MILLER STYLE REAR CONNECTOR M23-10 M35-10 M35-12 M35-15 LINCOLN STYLE REAR CONNECTOR L35-10 L35-12 L35-15 EURO-KWIK STYLE REAR CONNECTOR X23-10 X35-10 X35-12 X35-15 NOZZLES 21 Series CONTACT TIPS 11 Series GAS DIFFUSERS CONDUCTOR TUBE MIG Welding Products & Accessories Series 22 Series Series FAB52 STANDARD OPTIONAL International Customer Care: / FAX

28 MIG Welding Products & Accessories MINI-MIG Gun Replacement Parts TWECO MILLER 12 LINCOLN EURO U.S. Customer Care: / FAX Canada Customer Care: / FAX

29 MINI-MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION PART NO./STOCK NO. Refer to Pages Refer to Pages Refer to Pages Refer to Pages A A A A K350-1 Refer to Pages K-174C 224S 44CS 170M 174M-N WM-354M TLAK-352 LAK SP-354 AK353 AK-353-2A 174EX-1 4-MS 174EX-1C 174X-2 TCR50 MIG Welding Products & Accessories International Customer Care: / FAX

30 MIG Welding Products & Accessories PULSEMASTER MIG GUN SERIES FEATURES & BENEFITS One-touch, on-the-fly controls Exceptional weld bead Operator appeal and reduces operator fatigue Durable for industrial applications Lower heat in the handle and conductor tube Improved performance with longer life consumables OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Smart Capability Standard Without Smart Capability Rear Connector Light Duty Fab Medium Duty Fab Heavy Duty Fab PulseMaster 350 PulseMaster U.S. Customer Care: / FAX Canada Customer Care: / FAX

31 PULSEMASTER MIG GUN HANDLE DESIGN & STYLE PERFORMANCE DURABILITY EASE OF USE Quick-change, multi-position conductor tube Extended-life consumables Blade-style trigger performs over 2 million cycles without failure Ergonomic handle design Digital display and one-touch controls for on-the-fly adjustments Improved strain relief provides excellent flexibility and reduces operator fatigue Heavy duty industrial design featuring an impact-resistant handle High-performance cable designed for the demands of pulse welding Exceptionally smooth feed performance reduces bird nesting MIG Welding Products & Accessories Digital Display Screen Selection Buttons Menu Options Welding current Material thickness Wire feed speed Arc length trim International Customer Care: / FAX

32 MIG Welding Products & Accessories PulseMaster 350 & 450 Amp 60% Duty Cycle, CO 2 AIR-COOLED PULSEMASTER GUN ASSEMBLIES Description Tweco* PMA PMA PMA PMA AIR-COOLED PULSEMASTER SMART GUN ASSEMBLIES Description Tweco PMAS PMAS PMAS PMAS (PART NO. / STOCK NO.) (PART NO. / STOCK NO.) Euro-Kwik PMA312X-3545 PMA315X-3545 PMA412X-3545 PMA415X-3545 Euro-Kwik PMAS312X-3545 PMAS315X-3545 PMAS412X-3545 PMAS415X U.S. Customer Care: / FAX Canada Customer Care: / FAX

33 TEAMWORK Analani (Ana) Smith started with Tweco in Wichita, Kansas in 1996, building welding helmets and goggles. She continued her career through assembly and machining departments over the next 8 years and then moved to Texas with the company. She got some training and work in robotics assembly and was later moved to the welding lab a few years ago. Her experience with components and assembly lead to a desire to learn more and more about welding. I AM PROUND TO BE A PART OF THERMADYNE. AMONG OTHER THINGS, WE MANUFACTURE AND SELL SOME OF MOST POPULAR MIG GUNS IN THE WORLD. THE BRAND TWECO STANDS FOR QUALITY AND RELIABILITY. TWECO IS THE WORLD S LARGEST SUPPLIER OF WELDING AND CUTTING PRODUCTS INCLUDING AN EXTENSIVE ARRAY FROM BASIC MANUAL WELDING TOOLS AND ACCESSORIES TO MIG GUNS, CONSUMABLES AND A COMPLETE SELECTION OF PRODUCTS FOR PRECISION ROBOTIC WELDING. Ana Smith has no time to get bored on the job. Every day is different. As part of the team of laboratory technicians at the Thermadyne welding lab in Denton, Texas, every day offers a new challenge. Ana is a hard worker and a great addition to our team, reports Principal Laboratory Technician, Galen Johnson. ANA SMITH Laboratory Technician Denton, Texas THERMADYNE, A GLOBAL CUTTING AND WELDING LEADER joins the American Welding Society in encouraging individuals to practice the art, craftsmanship and professions of welding, metalworking and fabrication. Victor, Thermal Dynamics, Thermal Arc, Arcair, Tweco, Stoody, Cigweld and TurboTorch are among the family of brands that you can count on for safety, reliability and quality. MIG Welding Products & Accessories TWECO PPROFESSIONAL NUMBER 4 MIG GUN AND TWECO SPRAY MASTER MIG GUN. International Customer Care: / FAX

34 MIG Welding Products & Accessories PulseMaster Air-Cooled Replacement Parts 8a b U.S. Customer Care: / FAX Canada Customer Care: / FAX

35 PULSEMASTER AIR-COOLED MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION PART NO./STOCK NO. Refer to Pages Refer to Pages Refer to Pages PMA54-16S 66J-3 Refer to Pages PMHSK PM84-PCB-HK PM84-H PM84 PM83 PMA-SPS PM PM PM400X-12 PM400X-15 PM PM PM500X-12 PM500X RSSR PM94 PM94X H MS354-DSM PM6RC 174EX-1 4M-S X6RC 174X-2 TCR50 MIG Welding Products & Accessories International Customer Care: / FAX

36 MIG Welding Products & Accessories COMPACT ELIMINATOR MIG GUN SERIES FEATURES & BENEFITS Operator appeal Field repairable Improved performance patented contact tip Ball & socket conductor tube design Wide welding applications OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Flux-Cored Gas Shielded Flux-Cored Self Shielded Dual Schedule Locking Trigger Rear Connector Knucklehead Flexible Conductor Tube Light Duty Fab Medium Duty Fab Heavy Duty Fab Compact Eliminator 250 Amp Compact Eliminator 450 Amp 36 U.S. Customer Care: / FAX Canada Customer Care: / FAX

37 Compact Eliminator 250 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR ELC ELC MILLER STYLE REAR CONNECTOR ELC212M-4045 ELC215M-4045 ELC225M-4045 EURO-KWIK STYLE REAR CONNECTOR XELC NOZZLES EL22I Series CONTACT TIPS EL16 Series 14 Series 16S Series GAS DIFFUSERS EL CONDUCTOR TUBE EL63J Series MIG Welding Products & Accessories EL16 Series EL52CT EL22CT Series 14 Series EL52CT-14 16S Series EL52CT-16 HD22 Series 11H Series HD52-11 EL24CT Series EL16 Series STANDARD OPTIONAL International Customer Care: / FAX

38 MIG Welding Products & Accessories Compact Eliminator 450 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR ELC ELC ELC MILLER STYLE REAR CONNECTOR ELC410M-3545 ELC412M-3545 ELC415M-3545 ELC425M-116 NOZZLES EL24I Series CONTACT TIPS EL16 Series EL16 Series EL16 Series EURO-KWIK STYLE REAR CONNECTOR GAS DIFFUSERS EL54SW EL54CT-SW EL54CT-H XELC XELC CONDUCTOR TUBE EL64J Series EL24CT Series 14 Series S Series QTR56-SW REL24CT Series EL16 Series QTREL54-H 14 Series EL26CT Series EL16 Series EL56-SW STANDARD OPTIONAL 38 U.S. Customer Care: / FAX Canada Customer Care: / FAX

39 ANYTHING. ANYTIME. ANYWHERE. Galen Johnson has been welding since He served in Vietnam and has his own portable welding rig. His career has included work on pipelines, railroads and odd jobs. I VE DONE WELDING FOR EVERYTHING FROM PIPELINES TO TRICYCLES. I VE EVEN REBUILT VEHICLES. WHEN I RAN MY OWN SMALL BUSINESS I CALLED IT TRIPLE A WELDING ANYTHING, ANYTIME, ANYWHERE. Galen applies that can-do spirit in everything he does. More than a dozen years ago he was persuaded to join Tweco to contribute to research and development activities. I joined Tweco to work in R&D in I m still here. They won t let me out, He says with a smile. Today, Galen is an integral part of product initiatives, customer service and technical support for Thermadyne. He runs the Lab in Denton, Texas. Galen is always on the go. His variety of welding experience is invaluable, as we manufacture and sell products for a wide range of welding processes and all applications. Galen brings his vast experience and expertise to evaluate our products. Galen is always on the go, reports a co-worker from the Thermadyne global product line management team, adding. We re lucky to have him around. GALEN JOHNSON Principal Laboratory Technician Denton, Texas MIG Welding Products & Accessories THERMADYNE, A GLOBAL CUTTING AND WELDING LEADER joins the American Welding Society in encouraging individuals to practice the art, craftsmanship and professions of welding, metalworking and fabrication. Victor, Thermal Dynamics, Thermal Arc, Arcair, Tweco, Stoody, Cigweld and TurboTorch are among the family of brands that you can count on for safety, reliability and quality. TWECO PULSEMASTER AND PULLMASTER MIG GUNS OFFER DIGITAL DISPLAY AND TIG-LIKE WELD QUALITY ON ALUMINUM AND STAINLESS STEEL. International Customer Care: / FAX

40 MIG Welding Products & Accessories STANDARD ELIMINATOR MIG GUN SERIES FEATURES & BENEFITS Operator appeal Field repairable Improved performance patented contact tip Ball & socket conductor tube design Wide welding applications OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Flux-Cored Gas Shielded Flux-Cored Self Shielded Dual Schedule Locking Trigger Rear Connector Knucklehead Flexible Conductor Tube Light Duty Fab Medium Duty Fab Heavy Duty Fab Standard Eliminator 450 Amp 40 U.S. Customer Care: / FAX Canada Customer Care: / FAX

41 Standard Eliminator 450 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR EL MILLER STYLE REAR CONNECTOR LINCOLN STYLE REAR CONNECTOR EL415L-3545 EL415L-116 EURO-KWIK STYLE REAR CONNECTOR EL415M-3545 EL415M-116 XEL NOZZLES EL24I Series EL24CT Series CONTACT TIPS EL16 Series EL16 Series EL16 Series GAS DIFFUSERS EL54SW EL54CT-SW EL54CT-H CONDUCTOR TUBE EL64J Series MIG Welding Products & Accessories 14 Series S Series QTR56-SW REL24CT Series EL16 Series QTREL54-H 14 Series EL26CT Series EL16 Series EL56-SW STANDARD OPTIONAL International Customer Care: / FAX

42 MIG Welding Products & Accessories Eliminator Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

43 ELIMINATOR MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION Compact 250 Amp Compact 450 Amp Standard 450 Amp Refer to Pages Refer to Pages Refer to Pages J-3 66J-3 Refer To Pages EL66-CR21 7 EL66-CR 152 ELC84-H ELC124FM ELC94-BL ELC MS144 ELC215R ELC415R N/A XELC415R 235RSSR ELC100-2RK ELC100-4RK EPG172H HK 172X-M C6RC X6RC MS354-DSM Refer to Page 84 Refer to Pages TCR50 174X-M EL86-H N/A EL96-B EL96 EL146 EL415R N/A EL100-4RK MIG Welding Products & Accessories International Customer Care: / FAX

44 MIG Welding Products & Accessories TUFF-N-LITE MIG GUN FEATURES & BENEFITS Operator appeal and reduces operator fatigue Field repairable Wide welding applications OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Flux-Cored Gas Shielded Flux-Cored Self Shielded Rear Connector Light Duty Fab Heavy Duty Fab TUFF-N-LITE U.S. Customer Care: / FAX Canada Customer Care: / FAX

45 TUFF-N-LITE 350 Amp 60% Duty Cycle, CO AMP GUN Cable Rear Connection Style (PART NO. / STOCK NO.) Wire Size Length Tweco* Miller TL TL350M CT / 24FN NOZZLES 23 Series 24A Series 34CT / 34FN HD24 Series 34A CONTACT TIPS 14 Series 54A 16S Series 14 Series 16S Series EL16 Series GAS DIFFUSERS 54A-16 HD54-14 HD54-16 HD54-EL CONDUCTOR TUBE 64TL Series MIG Welding Products & Accessories STANDARD OPTIONAL International Customer Care: / FAX

46 MIG Welding Products & Accessories TUFF-N-LITE Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

47 TUFF-N-LITE REPLACEMENT PARTS LIST # DESCRIPTION PART NO./STOCK NO. Refer to Pages Refer to Pages Refer to Pages Refer to Pages TL-NC TL350-86R 7 EL96B EL96 104TL 136 TL RSSR C6RC HK MS354-DSM Refer to Page 84 Refer to Pages TCR50 MIG Welding Products & Accessories International Customer Care: / FAX

48 MIG Welding Products & Accessories SUPRA XT MIG GUN SERIES FEATURES & BENEFITS Field Repairable Durable & dependable Micro-switch trigger design Front and rear spring strain relief and cable support Rugged & durable power cable Wide welding applications OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Flux-Cored Gas Shielded Flux-Cored Self Shielded Rear Connector Heavy-Duty Front End Consumables Eliminator Style Front End Consumables Knucklehead Flexible Conductor Tube Medium Duty Fab Heavy Duty Fab SUPRA XT SEHD 450 SUPRA XT SEL U.S. Customer Care: / FAX Canada Customer Care: / FAX

49 SUPRA XT SEHD Series 450 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR SEHD400-5M1,6 MILLER STYLE REAR CONNECTOR LINCOLN STYLE REAR CONNECTOR SEHD400L-5M1,6 SEHD400M-5M1,6 24CT / 24FN Series NOZZLES HD24 Series 34CT / 34FN CONTACT TIPS 16S Series 14 Series EL16 Series GAS DIFFUSERS HD54-16 HD54-14 HD54-EL CONDUCTOR TUBE SE64J Series MIG Welding Products & Accessories 14 Series 54A 23 Series 24A Series 34A 16S Series 54A-16 STANDARD OPTIONAL International Customer Care: / FAX

50 MIG Welding Products & Accessories SUPRA XT SEL Series 450 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR SEL400-5M1,6 MILLER STYLE REAR CONNECTOR LINCOLN STYLE REAR CONNECTOR SEL400L-5M1,6 SEL400M-5M1,6 NOZZLES EL24I Series EL24CT Series CONTACT TIPS EL16 Series EL16 Series EL16 Series GAS DIFFUSERS EL54SW EL54CT-SW EL54CT-H CONDUCTOR TUBE SEL64J Series 14 Series S Series QTR56-SW REL24CT Series EL16 Series QTREL54-H 14 Series EL26CT Series EL16 Series EL56-SW STANDARD OPTIONAL 50 U.S. Customer Care: / FAX Canada Customer Care: / FAX

51 MIG Welding Products & Accessories International Customer Care: / FAX

52 MIG Welding Products & Accessories SUPRA XT Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

53 SUPRA XT REPLACEMENT PARTS LIST # DESCRIPTION PART NO./STOCK NO. Refer to Pages Refer to Pages Refer to Pages J-3 Refer to Pages SE86-H SE96 SE96-SW SE96-B SE66 SE66-B SE RSSR C6RC HK MS354-DSM Refer to Page 84 Refer to Pages TCR50 MIG Welding Products & Accessories International Customer Care: / FAX

54 MIG Welding Products & Accessories SMOKE MASTER FUME EXTRACTION MIG GUN SERIES FEATURES & BENEFITS Operator appeal and reduces operator fatigue MIG gun handle incorporates handle slide valve Field repairable Rugged & durable power cable Vacuum cools the front end consumables OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Flux-Cored Gas Shielded Flux-Cored Self Shielded Rear Connector Light Duty Fab Medium Duty Fab Heavy Duty Fab Smoke Master 250 Smoke Master U.S. Customer Care: / FAX Canada Customer Care: / FAX

55 Smoke Master 250 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR S S NOZZLES EL22I Series CONTACT TIPS EL16 Series 14 Series 16S Series EL16 Series MILLER STYLE REAR CONNECTOR GAS DIFFUSERS EL EL52CT S212M-4045 S215M-4045 CONDUCTOR TUBE S62 Series MIG Welding Products & Accessories EL22CT Series 14 Series EL52CT-14 16S Series EL52CT-16 HD22 Series 11H Series HD52-11 STANDARD OPTIONAL EL24CT Series EL16 Series International Customer Care: / FAX

56 MIG Welding Products & Accessories Smoke Master 450 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR S S MILLER STYLE REAR CONNECTOR S412M-116 S415M-116 LINCOLN STYLE REAR CONNECTOR S415L-116 NOZZLES EL22I Series EL22CT Series HD22 Series EL24CT Series CONTACT TIPS EL16 Series 14 Series 16S Series EL16 Series 14 Series 16S Series 11H Series EL16 Series GAS DIFFUSERS EL EL52CT EL52CT-14 EL52CT-16 HD CONDUCTOR TUBE STANDARD OPTIONAL S64 Series Tweco Smoke Collector Fume Removal System Description (PART NO. / STOCK NO.) TSC U.S. Customer Care: / FAX Canada Customer Care: / FAX

57 MIG Welding Products & Accessories International Customer Care: / FAX

58 MIG Welding Products & Accessories Smoke Master Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

59 AIR-COOLED SMOKE MASTER 250 & 450 AMP MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION 250 AMP 450 AMP Refer to Pages Refer to Pages EL52 EL52CT S S64-R S S64-1 S62-60 S64-60 S62-45 N/A 7 N/A S64-2 S22-62L S24-62 N/A S24-62HV S62T-60 S64T-60 S62T-45 N/A S82 S86 S82-V S86-V ELC94-BL ELC94 EL96 S82-C S86-C S212 S412 S215 S412-H S415-H SHP-12 SHP-15 ST6RC MS354-DSM Refer to Page 84 Refer to Pages S415 MIG Welding Products & Accessories International Customer Care: / FAX

60 MIG Welding Products & Accessories FLUXCORED MIG GUN SERIES FEATURES & BENEFITS Field repairable Durable & dependable Micro-switch trigger design Rugged & durable power cable Wide welding applications OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) Flux-Cored Gas Shielded Flux-Cored Self Shielded Rear Connector Medium Duty Fab Heavy Duty Fab SEFC Series 350 SEFC Series U.S. Customer Care: / FAX Canada Customer Care: / FAX

61 FLUXCORED "SEFC" 350 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR CONSUMABLE PARTS Contact Tip 14FC FC FC FC-332 N/A N/A N/A N/A 16FC-564 N/A 16FC-764 Stickout Size 3/4 (19MM) 1-1/2 (38MM) Thread Protector Insulated Guide Nozzle SEFC350T-10 SEFC350T-15 MILLER STYLE REAR CONNECTOR SEFC350M-10 SEFC350M-15 FLUXCORED "SEFC" 450 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR.045 (1,2mm) 24FC FC (1,72mm) LINCOLN STYLE REAR CONNECTOR 5/64 (2,0mm) Wire Size 24FC FC-275 Conduit 15 Ft (5M) 43FC FC FC SEFC SEFC MILLER STYLE REAR CONNECTOR SEFC450M-15 LINCOLN STYLE REAR CONNECTOR SEFC450T-15 SEFC /32 (2,4mm) 7/64 (2,8mm) 24FC-P 26FC-P 1/8 (3,2mm) 16FC-120 MIG Welding Products & Accessories International Customer Care: / FAX

62 MIG Welding Products & Accessories FLUXCORED Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

63 FLUXCORED MIG GUNS 350 & 450 AMP REPLACEMENT PARTS LIST # DESCRIPTION 350 AMP 450 AMP 24FC FC FC-P 14FC FC FC FC-332 N/A N/A 64FC-60 64FC-45 N/A SE86FC-R2 156W-HS SE86FC-H 7 SE96 SE96-SW SE96-B 26FC FC FC-P N/A N/A 16FC-564 N/A 16FC FC FC-60 66FC-45 66FC-180 N/A SEFC450-10C SEFC350-15C SEFC450-15C C6RC MS354-DSM FC H FC H FC MH FC MH 173FCH 176FCH 43FC N/A 43FC FC N/A 44FC N/A 44FC TCR50 MIG Welding Products & Accessories International Customer Care: / FAX

64 MIG Welding Products & Accessories ELIMINATOR SPOOL GUN FEATURES & BENEFITS Excellent service and ease of operation Comfortable handle design Quick disconnect conductor tube Rugged & durable Adapts to most welding machines Improved performance with patented contact tip OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Rear Connector Light Duty Fab Medium Duty Fab Eliminator Spool Gun U.S. Customer Care: / FAX Canada Customer Care: / FAX

65 Eliminator Spool Gun 300 Amp 60% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR SSG SSG NOZZLES EL24CT Series CONTACT TIPS EL16 Series EL16 Series GAS DIFFUSERS PMP64EL Series EL54CT-SW EL54CT-H CONDUCTOR TUBE MIG Welding Products & Accessories 14 Series STANDARD OPTIONAL EL16 Series EL54SW EL24I Series International Customer Care: / FAX

66 MIG Welding Products & Accessories Eliminator Spool Gun Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

67 ELIMINATOR SPOOL MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION PART NO./STOCK NO. Refer to Pages Refer to Pages Refer to Pages SPG103 SPG103-1 SPG EPG66-N EPG ,8 EPG ,9 EPG ,0 EPG ,2 EPG ,6 EPG-FGN EPG86-2 ESG90 SSGM24 SPG-96TL SSG86 PMP-PV PMP64EL30 PMP64EL180 PMP64SFLX360 PMP44PTF116 PMP-44FLX-116 PMP # DESCRIPTION PART NO./STOCK NO. SSG300G ESG186 ESG186S ESG186C ESG186S-3 ESG44TF-116 BG-53N04 SSG3003GH SSG30025 SSG30050 SSG300CW ESG-HW SSG-DINS25 EPG-RGN ESG-172SL SSGT6RC SPG146R SPG102 ESG6RCUGN SSG172PS ESG172 TCR50 MIG Welding Products & Accessories International Customer Care: / FAX

68 MIG Welding Products & Accessories PULLMASTER MIG GUN SERIES FEATURES & BENEFITS Excellent service and ease of operation Comfortable handle design Quick disconnect conductor tube Rugged & durable Improved performance with longer life consumables standard PullMaster OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Rear Connector Light Duty Fab Medium Duty Fab PullMaster U.S. Customer Care: / FAX Canada Customer Care: / FAX

69 PullMaster Air-Cooled MIG Gun 300 Amp 60% Duty Cycle, CO 2 STANDARD - TWECO* STYLE REAR CONNECTOR PMP PMP SMART - TWECO STYLE REAR CONNECTOR PMPS PMPS NOZZLES PMA24 Series EL24I Series CONTACT TIPS 16APS Series EL16 Series EL16 Series GAS DIFFUSERS PMP64EL Series PMA54-16S EL54SW EL54CT-SW CONDUCTOR TUBE STANDARD OPTIONAL MIG Welding Products & Accessories EL16 Series EL54CT-H EL24CT Series 14 Series International Customer Care: / FAX

70 MIG Welding Products & Accessories PullMaster Air-Cooled Replacement Parts b 19 6a U.S. Customer Care: / FAX Canada Customer Care: / FAX

71 PULLMASTER AIR-COOLED MIG GUN REPLACEMENT PARTS LIST PART NO./STOCK # DESCRIPTION NO. Refer to Pages Refer to Pages PMA54-16S Refer to Pages PMP-44FLX-116 PMP-44PTF-116 PMP EPG186 PMPS186 PMP PMP PMP PMP PMPS PMPS PMPS PMPS PMP103 SPG103-1 SPG103-8 PMPS-106TA PMPS-106TA EPG EPG EPG EPG EPG EPG V EPG V EPG V # DESCRIPTION PART NO./STOCK NO. SPG-RWG EPG86-2 PMP-T6RC PMP-M24 SPG-96TL SPG86 PMP PMP Refer to Page 84 MS354-DSM PM85-PCB BG-53N04 EPG-HW PMP-PV EPG354T EPG354M EPG354L PMP354T TCR50 MIG Welding Products & Accessories International Customer Care: / FAX

72 MIG Welding Products & Accessories PULSEMASTER WATER-COOLED MIG GUN SERIES FEATURES & BENEFITS One-touch, on-the-fly controls Exceptional weld bead Operator appeal and reduces operator fatigue Durable for industrial applications Lower heat in the handle and conductor tube Improved performance with longer life consumables OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Smart Capability Standard Without Smart Capability Rear Connector Light Duty Fab Medium Duty Fab Heavy Duty Fab PulseMaster 400 PulseMaster U.S. Customer Care: / FAX Canada Customer Care: / FAX

73 PulseMaster Water-Cooled 400 & 500 Amp 100% Duty Cycle, CO 2 STANDARD SMART Description Description Tweco Water Coolers Tweco* PMW PMW PMW PMW Tweco PMWS PMWS PMWS PMWS (PART NO. / STOCK NO.) (PART NO. / STOCK NO.) Euro-Kwik PMW412X-3545 PMW415X-3545 PMW512X-3545 PMW515X-3545 Euro-Kwik PMWS412X-3545 PMWS415X-3545 PMWS512X-3545 PMWS515X-3545 MIG Welding Products & Accessories TC900 WATER COOLER Description (PART NO. / STOCK NO.) Tweco TC900-G TC900-V TC900-GX TCV900 WATER COOLER Description (PART NO. / STOCK NO.) Tweco TCV900-G TCV900-V International Customer Care: / FAX

74 MIG Welding Products & Accessories PulseMaster Water-Cooled Replacement Parts a 10 9b U.S. Customer Care: / FAX Canada Customer Care: / FAX

75 PULSEMASTER WATER-COOLED MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION 7 PART NO./ STOCK NO. Refer to Pages Refer to Pages WC23-1 Refer to Pages PMW5516 PMW64-3 Refer to Pages PMHSK PM84-PCB-HK PM84-H PM84 PM83 PMW-SPS PMW512 PMW515 # DESCRIPTION PART NO./ STOCK NO. QR-SPR QR-RC PMW603-WH PM94 PM94X MS354-DSM H PMW6RC WC6-170H WC174X-B 174X-2 4M-S X6RC WC174X MIG Welding Products & Accessories International Customer Care: / FAX

76 MIG Welding Products & Accessories SUPRA WATER-COOLED MIG GUN FEATURES & BENEFITS Operator appeal and reduces operator fatigue Provides cooling benefits for the front end consumables Increased duty cycle at high amperage applications Rugged & durable Field repairable Ease of use OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Rear Connector Medium Duty Fab Heavy Duty Fab SUPRA U.S. Customer Care: / FAX Canada Customer Care: / FAX

77 SUPRA Water-Cooled 450 Amp 100% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR SW SW SW SW NOZZLES SW24 Series SW64-3 CONTACT TIPS 16S Series EL16 Series MILLER STYLE REAR CONNECTOR GAS DIFFUSERS SW54-16S SW54-EL SW410M-116 SW412M-116 SW415M-116 CONDUCTOR TUBE SW64-60 MIG Welding Products & Accessories STANDARD OPTIONAL International Customer Care: / FAX

78 MIG Welding Products & Accessories SUPRA Water-Cooled Replacement Parts 78 U.S. Customer Care: / FAX Canada Customer Care: / FAX

79 450 AMP WATER-COOLED MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION PART NO./STOCK NO. SW24-17 SW24-15 SW24-21 Refer to Pages Refer to Pages SW54-16S SW54-EL SW SW64-R SW64-3 SW64-60 SW64-1 SW94 SW84 SW84-S SW400-WHI SW134-W SW410-CC SW412-CC SW415-CC SW400-CW # DESCRIPTION PART NO./STOCK NO. SW410-PC SW412-PC SW415-PC SW134-G SW410 SW412 SW415 SW144 SW184 SW400-WHO SW194-M SW194-F SW-QCM SW-QCF Refer to Pages SW174X-1C SW174-T 174TL-M 174M-N MIG Welding Products & Accessories International Customer Care: / FAX

80 MIG Welding Products & Accessories STANDARD WATER-COOLED MIG GUN FEATURES & BENEFITS Operator appeal and reduces operator fatigue Provides cooling benefits for the front end consumables Increased duty cycle at high amperage applications Rugged & durable Field repairable Ease of use OUTPUT PROCESS STANDARD OPTIONS APPLICATION MODEL Current (Amps) Duty Cycle Mixed Gas Wire Diameter in. (mm) MIG Aluminum Rear Connector Medium Duty Fab Heavy Duty Fab Standard U.S. Customer Care: / FAX Canada Customer Care: / FAX

81 Standard Water-Cooled 600 Amp 100% Duty Cycle, CO 2 TWECO* STYLE REAR CONNECTOR WCS WCS WCS WCS WCS WCS NOZZLES WC26 Series WC26-EL Series WC26-1 CONTACT TIPS 16S Series EL16 Series GAS DIFFUSERS WC56A-SW WC56EL-SW CONDUCTOR TUBE WCS66-60 MIG Welding Products & Accessories WC26-1 RWC26 Series 16S Series QTRW56-SW STANDARD OPTIONAL International Customer Care: / FAX

82 MIG Welding Products & Accessories Standard Water-Cooled Replacement Parts U.S. Customer Care: / FAX Canada Customer Care: / FAX

83 600 AMP WATER-COOLED MIG GUN REPLACEMENT PARTS LIST # DESCRIPTION PART NO./STOCK NO. Refer to Pages WC26-1 Refer to Pages Refer to Pages WC36-R WCS36-H 7 Refer to Pages WC86-HC WC66-N W6R-H EL96-B EL96 WC106 WC610-WH WC612-WH WC615-WH WC610-GH WC612-GH WC615-GH # DESCRIPTION PART NO./STOCK NO. WC610-PC WC612-PC WC615-PC WC WC WC QR-SPHD W6RC WC603-WH MS354-DSM WC6-170H WC174X-B Refer to Page 84 Refer to Pages MIG Welding Products & Accessories International Customer Care: / FAX

84 MIG Welding Products & Accessories Tweco MIG Gun Direct Plug & Control Wire Jumpers TWECO STYLE # DESCRIPTION AMP AMP Part No. Stock No. Part No. Stock No H 176SH HXL N/A 224S 225S 44CS MS-354-TAJ MILLER STYLE # DESCRIPTION AMP AMP Part No. Stock No. Part No. Stock No MH EL176MH MHXL N/A 174M-N 175M-N 224S 44CS EURO LINCOLN STYLE # DESCRIPTION AMP AMP Part No. Stock No. Part No. Stock No LH EL176LH CS AK353 AK-353-2A MS354DS-LJ EURO-KWIK STYLE # DESCRIPTION AMP AMP Part No. Stock No. 174EX-1 WC174X 4-MS 174EX-1C 174X-2 Part No. Stock No. 84 U.S. Customer Care: / FAX Canada Customer Care: / FAX

85 MIG Welding Consumables True professionals know that nothing can replace a Tweco MIG gun. For decades, welding operators around the world have felt the pride of owning one of the most trusted brands in the industry. With a rich history of producing top quality professional guns like the Spray Master and one of the most popular MIG guns of all time the No. 4 MIG, it s easy to see why the Tweco name has become synonymous with dependability and reliability. Nothing compares to the genuine craftsmanship of a Tweco gun. VISIT TODAY. International Customer Care: / FAX

86 MIG Welding Consumables MIG WELDING CONSUMABLES FEATURES Tweco offers a wide range of front end consumables to choose from to fit your welding application needs Conduit liners made from either zinc-plated music wire with and without nylon coated wall or Teflon tubing all having it s benefits when running the various welding wire material TRUST 86 U.S. Customer Care: / FAX Canada Customer Care: / FAX

87 ENHANCED DESIGN OF FRONT-END CONSUMABLES Increase productivity with Eliminator contact tip Double tip life use, twist it half turn counter-clockwise to expose a new wear point Heavy-Duty HD Tip and Diffuser Twist-it and forget it contact tip/diffuser for better electrical conductivity Thick-walled diffuser design acts as heat sink and conducts heat away from the arc source MIG Welding Consumables Increases electrical conductive surface area and thereby increases electrical conductivity Improve gas coverage with enhanced diffuser design 12 holes in the diffuser provides a more uniform gas flow over the welding wire and the weld pool for improved gas coverage International Customer Care: / FAX

88 MIG Welding Consumables STANDARD THREADED STYLE CONTACT TIPS Standard Heavy-Duty Tapered Wire Size (in/mm) Tip I.D. (in/mm) Part No. Stock No. Part No. Stock No. Part No. Stock No. 11, 11H, & 11T SERIES 0.25" (6,35MM) O.D. - M6 X 1.0 THREADS " (25,4MM) O.A.L T H-30 11T H-35 11T H-40 11T H-45 11T-45 11AH , 14H, & 14T SERIES 0.25" (6,35MM) O.D UNF THREADS " (38,1MM) O.A.L T T H-35 14T H-40 14T H-45 14T H-52 14T H T H A364 14AH AH H & 15HFC SERIES 0.345" (8,8MM) O.D UNF THREADS 15H & 15AH SERIES " O.A.L.; 15HFC " O.A.L. 15H-35 15H-45 15HFC-45 15H-52 15HFC-52 15H HFC H HFC H HFC H HFC H-18 15HFC-18 15AH AH S & 16ST SERIES 0.375" (9,5MM) O.D. - M8 X 1.25 THREADS " (38,1MM) O.A.L. 16S-35 16ST-35 16S-40 16ST-40 16S-45 16ST-45 16S-52 16ST-52 16S ST S S S S-18 16AS AS U.S. Customer Care: / FAX Canada Customer Care: / FAX

89 LONG LIFE THREADED STYLE CONTACT TIPS Standard Tapered Wire Size (in/mm) Tip I.D. (in/mm) Part No. Stock No. Part No. Stock No. 11RZ SERIES 0.25" (6,35MM) O.D. - M6 X 1.0 THREADS " (25,4MM) O.A.L. 11RZ-35 14RZ & 14RZT SERIES 0.25" (6,35MM) O.D UNF THREADS " (38,1MM) O.A.L. 14RZ-35 14RZT-35 14RZ-45 14RZT-45 14RZ-52 14RZT-52 16RZ & 16RZT SERIES 0.375" (9,5MM) O.D. - M8 X 1.25 THREADS " (38,1MM) O.A.L. 16RZ-35 16RZT-35 16RZ-40 16RZT-40 16RZ-45 16RZT-45 16RZ-45C 16RZT-45C 16RZ-52 16RZT-52 16RZ RZT RZ RZT MIG Welding Consumables LONG LIFE PULSEMASTER STYLE THREADED STYLE CONTACT TIPS Standard Wire Size (in/mm) Tip I.D. (in/mm) Part No. Stock No. 16PS SERIES 0.375" (9,5MM) O.D. - M8 X 1.25 THREADS " (30MM) O.A.L. 16PS-30 16PS-35 16PS-40 16PS-45 16APS PS PS-52 16APS-116 International Customer Care: / FAX

90 MIG Welding Consumables ELIMINATOR STYLE CONTACT TIPS Standard Tapered Wire Size (in/mm) Tip I.D. (in/mm) Part No. Stock No. Part No. Stock No. EL11 SERIES 0.25" (6,35MM) O.D " (25,4MM) O.A.L. EL11-35 EL11-45 EL16 & EL16T SERIES 0.345" (6,35MM) O.D " (38,1MM) O.A.L. EL16T-23 EL16-30 EL16T-30 EL16-35 EL16T-35 EL16-40 EL16T-40 EL16-45 EL16T-45 EL16-52 EL16T-52 EL EL16T-116 EL EL EL EL16A-364 EL16AT-364 EL16A-116 LONG LIFE ELIMINATOR STYLE CONTACT TIPS Standard Tapered Wire Size (in/mm) Tip I.D. (in/mm) Part No. Stock No. Part No. Stock No. EL16RZ & EL16RZT SERIES 0.345" (6,35MM) O.D " (38,1MM) O.A.L. EL16RZ-35 EL16RZT-35 EL16RZ-40 EL16RZT-40 EL16RZ-45 EL16RZT-45 EL16RZ-45C EL16RZT-45C EL16RZ-52 EL16RZT-52 EL16RZ-116 EL16RZT-116 EL16RZ EL16RZT U.S. Customer Care: / FAX Canada Customer Care: / FAX

91 MIG GUN NOZZLE TO TIP RELATIONSHIP: IT S MORE THAN JUST WELDER S PREFERENCE Recessed Tips Recessed Tip MIG Welding Consumables Flush Tips Protruding Tips Flush Tip Protruding Tip International Customer Care: / FAX

92 MIG Welding Consumables AIR-COOLED STANDARD & HEAVY-DUTY NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship 21 SERIES 3-PIECE NOZZLE DESIGN " (19,05MM) OUTSIDE DIAMETER 21-37F Standard (1) Standard (1) 21T-37 Tapered (1) 21T-37F Tapered (1) 21-50F Standard (1) Standard (1) 21-62F Standard (1) Standard (1) 22 SERIES FORMED NOZZLE " (19,05MM) OUTSIDE DIAMETER 22-37SS Standard Short Stop (3) 22T-37SS Standard Short Stop (3) Standard 22-50SS Standard Short Stop (3) Standard 22-62SS Standard Short Stop (3) HD22 SERIES 3-PIECE NOZZLE DESIGN " (22,2MM) OUTSIDE DIAMETER HD22-37 Standard (1) HD22-37F Standard (1) HD22-50 Standard (1) HD22-50F Standard (1) HD22-62 Standard (1) HD22-62F Standard (1) 92 U.S. Customer Care: / FAX Canada Customer Care: / FAX

93 AIR-COOLED STANDARD & HEAVY-DUTY NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship 23 SERIES 3-PIECE NOZZLE DESIGN " (22,2MM) OUTSIDE DIAMETER Standard 23-37F Standard 23T-37 Tapered 23T-37F Tapered Standard 23-50F Standard 23H-50 Heavy-Duty Standard 23-62F Standard 23H-62 Heavy-Duty 23H-62F Heavy-Duty Standard 23-75F Standard 23H-75 Heavy-Duty MIG Welding Consumables International Customer Care: / FAX

94 MIG Welding Consumables AIR-COOLED STANDARD & HEAVY-DUTY NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship 24A SERIES FORMED NOZZLE " (19,05MM) OUTSIDE DIAMETER 24A-37SS Standard Short Stop (1) 24AT-37SS Standard Short Stop (1) 24A-50 Standard 24A-50SS Standard Short Stop (1) 24AH-50 Standard Heavy-Duty 24AH-50SS Standard Short Stop (1) 24A-62 Standard 24A-62SS Standard Short Stop (1) 24AH-62 Standard Heavy-Duty 24AH-62SS Standard Short Stop (1) 24A-75 Standard 24A-75SS Standard Short Stop (1) 24AH-75 Standard Heavy-Duty 24AH-75SS Standard Short Stop (1) 24CT SERIES COURSE THREAD NOZZLE 24CT-37S Standard Short Stop (1) 24CT-50S Standard Short Stop (1) 24CT-50F Tapered 24CT-62S Standard Short Stop (1) 24CT-62F Tapered 24CT-62R Tapered 24CT-75S Standard Short Stop (1) 24CT-75R Straight 24FN SERIES FINE THREAD NOZZLE 24FN-37S Standard Short Stop (1) 24FN-62S Standard Short Stop (1) 24FN-62R Tapered 24FN-75S Standard Short Stop (1) 94 U.S. Customer Care: / FAX Canada Customer Care: / FAX

95 AIR-COOLED HEAVY-DUTY NOZZLES Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship HD24 SERIES 3-PIECE NOZZLE DESIGN HD24L-50 Tapered (1) HD24L-50F Tapered (1) HD24-50 Standard (2) HD24-50P Standard (2) HD24L-62 Tapered (1) HD24L-62F Tapered (1) HD24-62 Standard (2) HD24-62F Standard (2) HD24L-75 Tapered (1) HD24L-75F Tapered (1) HD24-75 Standard (2) HD24-75F Standard (2) HD24LB-62 Standard (1) (3) HD24LB-62F Tapered (1) (3) HD24LB-75 Tapered (1) (3) HD26B-62 Standard (2) (3) HD26B-75 Standard (2) (3) MIG Welding Consumables PULSEMASTER & PULLMASTER AIR-COOLED NOZZLES Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship PMA24 SERIES 3-PIECE NOZZLE DESIGN " (25,4MM) OUTSIDE DIAMETER PMA24-50F Straight PMA24-50 Straight PMA24-62F Straight PMA24-62 Straight PMA24H-62 Straight PMA24-75F Straight PMA24-75 Straight PMA24H-75 Straight International Customer Care: / FAX

96 MIG Welding Consumables AIR-COOLED STANDARD NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship 25CT SERIES COURSE THREAD NOZZLE 25CT-50 Standard 25CT-62 Standard 25CT-75 Standard 25CT-75F Standard 25I SERIES 3-PIECE NOZZLE DESIGN " (24,6MM) OUTSIDE DIAMETER 25I-62 Standard (1) 25I-75 Standard (1) 26CT SERIES COURSE THREAD NOZZLE 26CT-62 Standard 26CT-75 Standard 26I SERIES 3-PIECE NOZZLE DESIGN " (30,1MM) OUTSIDE DIAMETER 26I-62 Standard (1) 26I-75 Standard (1) 26I-87 Standard (1) AIR-COOLED FLAT ARC SPOT NOZZLES Nozzle Style Bore Diameter (in/mm) Part No. Stock No FAS 22-62FAS 23-75FAS 24A-62FAS 24A-75FAS 24A-100FAS 25CT-125FAS 25CT-162FAS 96 U.S. Customer Care: / FAX Canada Customer Care: / FAX

97 AIR-COOLED ELIMINATOR NOZZLES Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship EL22I SERIES 3-PIECE NOZZLE DESIGN " (22,2MM) OUTSIDE DIAMETER EL22I-37 Standard EL22I-50 Standard EL22I-50F Standard EL22I-50P Standard EL22I-62 Standard EL22I-62F Standard EL22I-62P Standard EL22I-75 Standard EL22CT SERIES 3-PIECE NOZZLE DESIGN " (22,2MM) OUTSIDE DIAMETER EL22CT-37 Standard EL22CT-37F Standard EL22CT-50 Standard EL22CT-50F Standard EL22CT-50P Standard EL22CTB-50 Standard (1) EL22CT-62 Standard EL22CTB-62 Standard (1) EL22CT-62F Standard EL22CT-62P Standard EL22CT-62H Standard Heavy-Duty EL22CT-75 Standard REL22 SERIES 3-PIECE NOZZLE DESIGN " (22,2MM) OUTSIDE DIAMETER REL22CT-37 Straight REL22CT-50 Straight REL22CT-50F Straight REL22CT-50P Straight REL22CT-62 Straight REL22CT-62P Straight MIG Welding Consumables International Customer Care: / FAX

98 MIG Welding Consumables AIR-COOLED ELIMINATOR NOZZLES Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship EL24I SERIES 3-PIECE NOZZLE DESIGN " (22,2MM) OUTSIDE DIAMETER EL24I-37 Tapered EL24I-50 Tapered EL24I-62 Tapered EL24I-62F Tapered EL24I-62R Tapered EL24I-62H Tapered Heavy-Duty EL24I-62HF Tapered Heavy-Duty EL24I-75 Tapered EL24I-75H Tapered Heavy-Duty EL24CT SERIES 3-PIECE NOZZLE DESIGN " (22,2MM) OUTSIDE DIAMETER EL24CT-37 Standard EL24CT-50 Standard EL24CT-50F Standard EL24CT-50P Standard EL24CT-62 Standard EL24CT-62F Standard EL24CT-62P Standard EL24CT-62R Standard EL24CT-62H Standard Heavy-Duty EL24CT-75 Standard EL24CT-75H Standard Heavy-Duty REL24 SERIES 3-PIECE NOZZLE DESIGN " (25,4MM) OUTSIDE DIAMETER REL24CT-50 Straight REL24CT-50F Straight REL24CT-50P Straight REL24CT-62 Straight REL24CT-62F Straight REL24CT-62FL Straight REL24CT-62P Straight REL24CT-75 Straight REL24CT-75F Straight REL24CT-75P Straight 98 U.S. Customer Care: / FAX Canada Customer Care: / FAX

99 WATER-COOLED NOZZLES Nozzle Style SW24 SERIES Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship SW24-15 Standard SW24-17 Standard SW24-21 Standard WC26 SERIES - STANDARD 3-PIECE NOZZLE DESIGN " (30MM) OUTSIDE DIAMETER WC26-62 Standard WC26-62R Standard WC26-75 Standard WC26-75F Standard WC26-75R Standard WC26 SERIES - ELIMINATOR 3-PIECE NOZZLE DESIGN " (30MM) OUTSIDE DIAMETER RWC26 SERIES WC26-50EL Standard WC26-62EL Standard WC26-62ELF Standard WC26-75EL Standard WC26-75ELF Standard WC26-75ELR Standard RWC26-50 Standard (1) RWC26-50F Standard (1) RWC26-62 Standard (1) RWC26-62F Standard (1) RWC26-62P Standard (1) RWC26-75 Standard (1) RWC26-75F Standard (1) RWC26-75P Standard (1) MIG Welding Consumables PULSEMASTER WATER-COOLED NOZZLES Nozzle Style PMW24 SERIES Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship PMW24-50F Standard PMW24-50 Standard PMW24-62F Standard PMW24-62 Standard PMW24-75F Standard PMW24-75 Standard International Customer Care: / FAX

100 MIG Welding Consumables AIR-COOLED STANDARD GAS DIFFUSERS Part No. Stock No. Material Contact Tip Nozzle MINI-MIG SERIES SERIES 51 EL51 QTRW SERIES FN MS52T-11 52HD SERIES 54P 54A 54A-16 54AL HD54-14 HD54-16 HD54-EL 55 SERIES 55SW (1) 55 (2) 55H (3) 55S-SW (1) 55S-H (2) (3) 55S-SWL (4) 56 SERIES 56S-SW 56S-H 100 U.S. Customer Care: / FAX Canada Customer Care: / FAX

101 AIR-COOLED ELIMINATOR STYLE GAS DIFFUSERS Part No. Stock No. Material Contact Tip Nozzle EL52 SERIES EL52 (3) EL52CT (3) EL52CT-14 (3) EL52CT-16 (3) HD52-11 (3) EL54 SERIES EL54-SW (1) (4) EL54-H (2) (4) EL54CT-SW (1) (4) EL54CT-H (2) (4) MIG Welding Consumables WATER-COOLED STYLE GAS DIFFUSERS Part No. Stock No. Material Contact Tip Nozzle 400 AMP SW54-16S SW54-EL 600 AMP WC56A-SW WC56A-H WC56EL-SW WC56EL-H QTRW56-SW QTRW56-H International Customer Care: / FAX

102 MIG Welding Consumables KNUCKLEHEAD FLEXIBLE CONDUCTOR TUBES BEND UP TO AN 80 ANGLE SprayMaster with Knucklehead Conductor Tube Knucklehead Conductor Tube ENGINEERED TO LAST LONGER HEAVY DUTY PERFORMANCE EVEN ON YOUR 80% DUTY CYCLE GUNS Leading competitor at only 348 cycles 102 U.S. Customer Care: / FAX Canada Customer Care: / FAX

103 KNUCKLEHEAD CONDUCTOR TUBES Amp/ Model Bend Angle Standard Cons. Eliminator Cons. PROFESSIONAL SPRAY MASTER SERIES Long Reach (2" longer) Part Number Stock Number MS62SFLX3-60 MS62SFLX4-80 MS63SFLX3-60 MS63SFLX4-80 MS64SFLX3-60 MS64SFLX4-80 MS64SFLX3-60LR MS64SFLX4-80LR PROFESSIONAL CHOICE NO. SERIES 3560SFLX SFLX SFLX SFLX SFLX SFLX SFLX3-60LR 64SFLX4-80LR PROFESSIONAL ELIMINATOR SERIES EL62SFLX3-60 EL62SFLX4-80 EL64SFLX3-60 EL64SFLX4-80 EL64SFLX4-80LR STANDARD WELDSKILL SERIES 62SFLX SFLX SFLX SFLX SFLX3-60LR 64SFLX4-80LR MIG Welding Consumables CONDUCTOR TUBE EXTENSIONS No 3 & 4 No. 5 No. 3 & 4 No. 5 Straight Bent 64A-4EX 65-4EX 64EX-45 65EX-45 64A-6EX 65-6EX 64EX-60 65EX-60 64A-8EX 65-8EX N/A N/A Rigid Conductor Tubes Extensions FOR TRADITIONAL STYLE GUNS International Customer Care: / FAX

104 MIG Welding Consumables PROFESSIONAL CONDUCTOR TUBES Series Part No. Stock No MINI-MIG Professional No. 1 Professional No. 2 Professional No. 3 Professional No. 4 Professional No. 5 Professional No. 6 Spray Master J-60 62J-45 62J A-60 62A-45 62A ELJ-60 62ELJ-80 62ELJ J-60 63J-45 63J-80 63J ELJ-60 63ELJ J-60 64J-45 64A-60 64A-45 64A-80 64A ELJ-60 64ELJ-45 64ELJ-80 64ELJ J-60 65J-45 65J-80 65J-180 Outer Jacket Material 65H-60-3R 65H-45-5R 65H-80-5R 66J-60 66J-45 66J-80 66J60-3R 66J80-3R 66ELJ-60 66ELJ-80 Back End Threads Radius Front End Threads MS63-60S MS63-45S MS63-60 MS63-45 MS MS62A U.S. Customer Care: / FAX Canada Customer Care: / FAX

105 PROFESSIONAL CONDUCTOR TUBES Series Part No. Stock No. Spray Master 350 Spray Master 450 Compact Eliminator 250 Compact Eliminator 450 Standard Eliminator 450 TUFF-N-LITE 350 SUPRA XT (SEHD) SUPRA XT - SEL 450 PulseMaster 350 & 450 (Air-cooled) PulseMaster 400 & 500 (Water-cooled) MS63-60 MS63-45 MS MS64H-60 MS64H-45 MS64H-180 * MS64H-60LM * MS64H-45LM ** MS64-60 ** MS64-45 EL63J-60 EL63J-45 EL64J-60 EL64J-45 EL64J-180 EL64-60 EL64-45 EL64J-60 EL64J-45 EL64J-180 EL64-60 EL TL-60 64TL-45 SE64J-60 SE64J-45 SE64J-60 SE64J-45 SE64J-180 Outer Jacket Material PMA64EL-45 PMW64-45 SSG Spool PMP64EL-180 PMP64EL-30 PMP Push/Pull PMP64EL-180 PMP64EL-30 Smoke Master 250 S62-60 S62-45 Smoke Master 450 S64-60 FLUXCORED 350 FLUXCORED FC-45 64FC-60 66FC-45 66FC-60 Back End Threads Radius Front End Threads MIG Welding Consumables International Customer Care: / FAX

106 MIG Welding Consumables CONDUIT LINERS FOR USE WITH STEEL WELDING WIRES Wire Size in/mm Part No. Stock No. Description 160 AMP AMP AMP Wire Size in/mm Part No. Stock No. Description AMP H H U.S. Customer Care: / FAX Canada Customer Care: / FAX

107 CONDUIT LINERS FOR USE WITH ALUMINUM WELDING WIRES Wire Size in/mm Part No. Stock No. Description 160 AMP AMP AMP 35TF TF N N N PULSEMASTER MIG GUN CONDUIT LINERS FOR USE WITH ALUMINUM/ STEEL WELDING WIRES Wire Size in/mm Part No. Stock No. Description 44PTF PTF PTF PTF JT JT-116 Wire Size in/mm Part No. Stock No. Description AMP 45N N PULLMASTER MIG GUN CONDUIT LINERS FOR USE WITH ALUMINUM/STEEL WELDING WIRES Wire Size in/mm Part No. Stock No. Description PMP PMP PMP PMP PMPS PMPS PMPS PMPS PMP-44FLX-116 PMP-44PTF-116 PMP MIG Welding Consumables International Customer Care: / FAX

108 MIG Welding Consumables R44 Series & R45 Series Conduit Liners CONDUIT LINERS FOR USE WITH STEEL WELDING WIRES Wire Size in/mm Part No. Stock No. Description AMP (INCLUDING NO. 5 EURO-KWIK SERIES) R R R R R R R Wire Size in/mm Part No. Stock No. Description AMP R R R R R R R CONDUIT LINERS FOR USE WITH ALUMINUM WELDING WIRES Wire Size in/mm Part No. Stock No. Description AMP R44WN FOR USE WITH ALUMINUM WELDING WIRES Wire Size in/mm Part No. Stock No. Description AWC Wire Size in/mm Part No. Stock No. Description AMP R45WN R45WN R45WN U.S. Customer Care: / FAX Canada Customer Care: / FAX

109 TWECO* STYLE REAR CONNECTOR WeldSkill 150 Amp MIG Guns Front End Consumables Nozzle Diffuser Contact Tip WM MILLER STYLE REAR CONNECTOR Nozzle Diffuser Contact Tip WM150M WM150M LINCOLN** STYLE REAR CONNECTOR Front End Consumables Front End Consumables Nozzle Diffuser Contact Tip WM150L MIG Guns & Consumables NOZZLES CONTACT TIPS GAS DIFFUSERS CONDUCTOR TUBE WS21 Series WS11 Series WS51 WM150J Series WS23 Series WS14 Series WS24A Series WS34A WS22 Series WS32 WS14 Series HD22 Series WS11 Series STANDARD OPTIONAL International Customer Care: / FAX

110 MIG Guns & Consumables TWECO* STYLE REAR CONNECTOR Front End Consumables Nozzle Diffuser Contact Tip WM MILLER STYLE REAR CONNECTOR WeldSkill 250 Amp MIG Guns Front End Consumables Nozzle Diffuser Contact Tip WM250M WM250M WM250M WM250M LINCOLN** STYLE REAR CONNECTOR Front End Consumables Nozzle Diffuser Contact Tip WM250L EURO STYLE REAR CONNECTOR Front End Consumables Nozzle Diffuser Contact Tip WM250X U.S. Customer Care: / FAX Canada Customer Care: / FAX

111 NOZZLES WS22 Series WS24A Series WS23 Series HD22 Series WS21 Series WS32 WS34A CONTACT TIPS WS14 Series WS14 Series WS11 Series WS14 Series GAS DIFFUSERS CONDUCTOR TUBE WM250J Series WS52 WS52FN HD STANDARD OPTIONAL MIG Guns & Consumables International Customer Care: / FAX

112 MIG Guns & Consumables TWECO* STYLE REAR CONNECTOR WeldSkill 400 Amp MIG Guns Front End Consumables Nozzle Diffuser Contact Tip WM WM WM WM MILLER STYLE REAR CONNECTOR Front End Consumables Nozzle Diffuser Contact Tip WM400M WM400M WM400M WM400M LINCOLN** STYLE REAR CONNECTOR Front End Consumables Nozzle Diffuser Contact Tip WM400L WM400L WM400L EURO STYLE REAR CONNECTOR Front End Consumables Nozzle Diffuser Contact Tip WM400X U.S. Customer Care: / FAX Canada Customer Care: / FAX

113 WS24CT / WS24FN Series NOZZLES WS24A Series WS34CT / WS34FN WS23 Series HD24 Series WS34A CONTACT TIPS WS14 Series WS16S Series EL16 Series WS14 Series GAS DIFFUSERS CONDUCTOR TUBE WM400J Series WS54A HD54-16 HD54-EL HD54-14 STANDARD OPTIONAL MIG Guns & Consumables International Customer Care: / FAX

114 MIG Guns & Consumables TWECO* STYLE REAR CONNECTOR Front End Consumables Nozzle Diffuser Contact Tip WM MILLER STYLE REAR CONNECTOR WeldSkill 500 Amp MIG Guns Front End Consumables Nozzle Diffuser Contact Tip WM500M NOZZLES CONTACT TIPS GAS DIFFUSERS CONDUCTOR TUBE WS25 CT Series 35 CT WS15H Series WS55SW WM500J Series 25I Series WS15H Series 55SW 26I Series WS16S Series 55S-SW 26CT Series 36CT STANDARD OPTIONAL 114 U.S. Customer Care: / FAX Canada Customer Care: / FAX

115 Tweco WeldSkill WM Series TWECO* STYLE REAR CONNECTOR Tweco WeldSkill MIG Guns with Knucklehead Flexible Conductor Tubes Amp Knucklehead Conductor Tube WM K4 WM K4 MIG Guns & Consumables MILLER STYLE REAR CONNECTOR Amp Knucklehead Conductor Tube WM250M K4 WM400M K4 LINCOLN** STYLE REAR CONNECTOR Amp Knucklehead Conductor Tube WM400L K4 International Customer Care: / FAX

116 MIG Guns & Consumables TWECO WELDSKILL REPLACEMENT PARTS U.S. Customer Care: / FAX Canada Customer Care: / FAX

117 (PART NO. / STOCK NO.) No. Description 150 Amp 250 Amp 400 Amp 500 Amp Refer to Pages Refer to Page 121 Refer to Page 120 Refer to Page 120 Refer to Page WM155 7 WM1-80 WM4-80 WM FMS N/A N/A 122FMS N/A 124FMS 122FM 124FM 244DS 244 WM91 WM92 91C 92C WM WM2SSR WM4SSR WM5SSR N/A 235RSSR C R6RC X6RC MS354-DSM 194DS MS172-RK X-M 174X-M 176X-M N/A M170-2H M170-4H M170-5H Refer to Page 84 Refer to Page 124 MIG Guns & Consumables International Customer Care: / FAX

118 MIG Guns & Consumables Tweco WeldSkill Spool Gun Part No. Stock No. Description WSP K3 Description Rating CONTROL WIRE JUMPER CORDS Manufacturer Machine Part Number Stock Number WSPMILL4PJC2 WSPMILL4PJC WSPLIN7PJC WSPMILL4PJC WSPESAB7PJC WSPESAB7PJC WSPESAB7PJC WSPGENJC 118 U.S. Customer Care: / FAX Canada Customer Care: / FAX

119 Ref Number Part Number Stock Number Tweco WeldSkill Spool Gun Description Refer to Page 121 Refer to Page 122 WS51 SPG66065 WSPDRC WSP WSPDR023 7 WSPGR023 7 WSPDR WSPGR WSPDR047 7 WSPGR047 WSPSCC WSPSC WSP62N WSP92 WSP62SFLX360 MIG Guns & Consumables PIN CONFIGURATION FOR GENERIC PLUGS Pin Function C H International Customer Care: / FAX

120 MIG Guns & Consumables WELDSKILL CONDUCTOR TUBES Series Part No. Stock No. WM150J-60 WM150J-45 WELDSKILL STANDARD 150 WM WM WM WELDSKILL STANDARD 250 WELDSKILL STANDARD 400 WELDSKILL STANDARD 500 Outer Jacket Material WM250J-60 WM400J-60 WM400J-45 WM500J-60 AIR-COOLED STANDARD GAS DIFFUSERS Radius Back End Threads Front End Threads Part No. Stock No. Material Contact Tip Nozzle MINI-MIG SERIES WS35-50 WM150 SERIES WS51 WM250 SERIES WS52 WS52FN WM400 SERIES WS54A WM500 SERIES WS55SW (1) WS55H (2) 120 U.S. Customer Care: / FAX Canada Customer Care: / FAX

121 STANDARD THREADED STYLE CONTACT TIPS - Standard Alloy Copper Tubing Standard Heavy-Duty Tapered Wire Size (in/mm) Tip I.D. (in/mm) Part No. Stock No. Part No. Stock No. Part No. Stock No. WS11, WS11H, & WS11T SERIES 0.25" (6,35MM) O.D. - M6 X 1.0 THREADS " (25,4MM) O.A.L. WS11-23 WS11T-23 WS11-30 WS11T-30 WS11-35 WS11T-35 WS11-45 WS11H45 WS11T-45 WS14, WS14H, & WS14T 0.25" (6,35MM) O.D UNF THREADS " (38,1MM) O.A.L. WS14-30 WS14T-30 WS14-35 WS14H-35 WS14T35 WS14-40 WS14H-40 WS14-45 WS14H-45 WS14T-45 WS14-52 WS14H-52 WS14T-52 WS WS14H-116 WS14T-116 WS WS14H-564 WS14A364 WS14AH-364 WS15H SERIES 0.345" (8,8MM) O.D UNF THREADS "(50MM) O.A.L. WS15HFC SERIES 0.345" (8,8MM) O.D UNF THREADS " (40,4MM) O.A.L. WS15H-35 WS15H-45 WS15H-116 WS15HFC-116 WS15H-564 WS15H-332 WS15H S & 16ST SERIES 0.375" (9,5MM) O.D. - M8 X 1.25 THREADS " (38,1MM) O.A.L. WS16S-35 WS16ST-35 WS16S-45 WS16ST-45 WS16S-52 WS16S-116 WS16ST-35 WS16S-564 MIG Guns & Consumables International Customer Care: / FAX

122 MIG Guns & Consumables AIR-COOLED STANDARD & HEAVY-DUTY NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship WS21 SERIES 3-PIECE NOZZLE DESIGN - STANDARD ALLOY COPPER " (19,05MM) OUTSIDE DIAMETER WS21-37 Standard (1) WS21T-37 Tapered (1) WS21-50F Standard (1) WS21-50 Standard (1) WS21-62 Standard (1) WS22 SERIES FORMED NOZZLE - STANDARD ALLOY COPPER " (19,05MM) OUTSIDE DIAMETER WS22-37SS Standard Short Stop (2) WS22T-37SS Standard Short Stop (2) WS22-50 Standard WS22-50SS Standard Short Stop (2) WS22-62 Standard WS22-62SS Standard Short Stop (2) WSHD22 SERIES 3-PIECE NOZZLE DESIGN - STANDARD ALLOY COPPER " (22,2MM) OUTSIDE DIAMETER WSHD22-50 Standard (1) AIR-COOLED STANDARD & HEAVY-DUTY NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship WS23 SERIES 3-PIECE NOZZLE DESIGN - STANDARD ALLOY COPPER " (22,2MM) OUTSIDE DIAMETER WS23-37 Standard WS23T-37 Tapered WS23T-37F Tapered WS23-50 Standard WS23-50F Standard WS23-62 Standard WS23H-62 Heavy-Duty WS23-75 Standard 122 U.S. Customer Care: / FAX Canada Customer Care: / FAX

123 AIR-COOLED STANDARD & HEAVY-DUTY NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship WS24A SERIES FORMED NOZZLE - STANDARD ALLOY COPPER " (19,05MM) OUTSIDE DIAMETER WS24A-37SS Standard Short Stop (1) WS24A-50 Standard WS24A-50SS Standard Short Stop (1) WS24A-62 Standard WS24A-62SS Standard Short Stop (1) WS24AH-62SS Standard Short Stop (1) WS24A-75 Standard WS24CT SERIES COURSE THREAD NOZZLE ALLOY COPPER WS24CT-50S Standard Short Stop (1) WS24CT-62S Standard Short Stop (1) WS24CT-62R Tapered WS24CT-75S Standard Short Stop (1) WS24FN SERIES FINE THREAD NOZZLE ALLOY COPPER WS24FN-50S Standard Short Stop (1) WS24FN-62S Standard Short Stop (1) MIG Guns & Consumables AIR-COOLED HEAVY-DUTY NOZZLES Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship WSHD24 SERIES 3-PIECE NOZZLE DESIGN WSHD24L-62 Tapered WSHD24L-62F Tapered WSHD24-62 Standard (1) WSHD24L-75 Tapered WSHD24-75 Standard AIR-COOLED STANDARD NOZZLES & NOZZLE INSULATORS Nozzle Style Bore Diameter (in/mm) Part No. Stock No. Nozzle Design Nozzle/Contact Tip Relationship 25CT SERIES COURSE THREAD NOZZLE ALLOY COPPER WS25CT-50 Standard WS25CT-62 Standard WS25CT-75 Standard International Customer Care: / FAX

124 MIG Guns & Consumables CONDUIT LINERS FOR USE WITH STEEL WELDING WIRES Wire Size in/mm Part No. Stock No. Description WM150 & WM250 SERIES WM400 SERIES WS WS WS WS WS WS WS WS WS WS Wire Size in/mm Part No. Stock No. Description WM500 SERIES WS WS WS45H CONDUIT LINERS FOR USE WITH ALUMINUM WELDING WIRES Wire Size in/mm Part No. Stock No. Description WM150 & WM250 SERIES WM400 SERIES WS42N WS44N WS44N U.S. Customer Care: / FAX Canada Customer Care: / FAX

125 NO SHORTCUTS It s part discipline, part pride and all passion that fuels Shane Cajun Guidry, a native of New Orleans, Louisiana. If you take pride in your work, then welding is for you, he says. Because every weld you make is your signature. Shane s passion for welding runs deeper than your average metalworker. His work has brought him from Russia to the 40-below tempertures of Alaska. Today he works as an AWS Certified Welding Inspector, where his no shortcuts attitude has made him a reliable team member. For every weld I inspect, I pretend a member of my family will depend on it, he says. SHANE NEEDS EQUIPMENT HE CAN RELY ON. THAT S WHY HE CHOOSES TWECO. ABOARD THE U.S.S. NIMITZ HE USED TWECOTONG ELECTRODE HOLDERS TO REPAIR A WEAPONS ELEVATOR. THEY RE INTERCHANGEABLE, DEPENDABLE, AND SAFE, HE SAYS. While in Alaska, Shane used Tweco arctic cables on an exploratory drilling site. He said, Even after dropping them seven stories down, they came up clean and ready to go again. SHANE GUIDRY AWS Certified Welding Inspector PM Testing Inc. Shane carries the torch will you? MIG Guns & Consumables THERMADYNE, A GLOBAL CUTTING AND WELDING LEADER, joins the American Welding Society in encouraging individuals to practice the art, craftsmanship and professions of welding, metalworking and fabrication. Victor, Thermal Dynamics, Thermal Arc, Arcair, Tweco, Stoody, Cigweld and TurboTorch are among the Thermadyne family of brands that you can count on for safety, reliability and quality. For more information visit or call Thermadyne Customer Care at International Customer Care: / FAX

126 Manual Welding Products & Accessories Manual Product TWECOTONG Electrode Holders Part Number Stock Number Amperage Capacity Body Alloy Electrode Capacity Cable Conn Capacity English Length Metric Length A-532 A-316 A-732 Tweco Ground Clamp Part Number Stock Number Amperage Capacity Jaw Opening Cable Conn Capacity English Length Metric Length GC-300 Tweco Cable Connectors Part Number Stock Number Description Type Cable Connection Cable Capacity Standard Package 2-MPC ** 2-MPC-1 * 2-MPC-2 * 4-MPC ** 4-MPC-1 * 4-MPC-2 * 126 U.S. Customer Care: / FAX Canada Customer Care: / FAX

127 TWECOTONG Electrode Holders Part Number Stock Number Amperage Capacity Body Alloy Electrode Capacity Cable Conn Capacity English Length Metric Length A532-MC** A316-MC** A732-MC** A-14 A-14-HD A-38-HD TWECOTONG Electrode Holder Parts Description A-532 Part No./ Stock No. A-532-1P A A-316-4R A A A AL A A-316 Part No./ Stock No. A-532-1P A A-316-4R A A A AL A A-732 Part No./ Stock No. A-732-1P A A A A A AL A A-14 Part No./ Stock No. A-732-1P A-14-3 A-14-4 A-14-7 A AL A A-14-HD Part No./ Stock No. A-732-1P A-14-3 A-14-HD-4 A-14-HD-7 A AL A A-38-HD Part No./ Stock No. A-38-HD-1P A-38-HD-3 A-38-HD-4 A-38-HD-7 FGC AL A Manual Welding Products & Accessories Part Stock Amperage Electrode Cable Conn English Metric Number Number Description Capacity Capacity Capacity Length Length 4TT International Customer Care: / FAX

128 Manual Welding Products & Accessories TWECO-TITE Holder Parts Part Number Stock Number Description 4TT-1 4TT-20 4TT-30 A FM Tweco Ground Clamps Part Number Stock Number Amperage Capacity Jaw Opening SGC-300 SGC-500 GC-200 GC-300MC** GC-500 FGC-200 FGC-300 Steel Clamp Parts Part Number Stock Number Description SGC Cable Conn Capacity English Length Metric Length Copper Clamp Parts Insulated Spring Cable Support Ring Cable Connection Screw Model No. Part No. Stock No. Part No. Stock No. Part No. Stock No. GC-300 GC GC GC U.S. Customer Care: / FAX Canada Customer Care: / FAX

129 Heavy Duty Rotary Ground Devices Part Number Stock Number Amperage Capacity Cable Capacity Number of Heads Shaft Stud English Length Metric Length RG-140 RG-230 RG-240 RG-440 RG-640 GCRG-140 Roto-Ground Parts Part Number Description Stock Number RG-140 Part No./ Stock No. RG RG RG Description RG A Z-L 2-5 RG-230 Part No./ Stock No. RG RG RG RG RG-240 Part No./ Stock No. RG RG RG RG RG-440 Part No./ Stock No. RG RG RG RG RG-640 Part No./ Stock No. RG RG RG RG Manual Welding Products & Accessories International Customer Care: / FAX

130 Manual Welding Products & Accessories Tweco Roto-Work Grounding Clamps Part Number Part Number Stock Number Stock Number Amperage Capacity Amperage Capacity Fits Roto-Ground Clamp Contact Jaw Opening GC GC-600-DBP GC-600-TMP Throat Height Throat Depth Cable Conn Capacity Over-All Height WCRG-600 WCRG-1200 WCRG-2000 GC Part Number Stock Number Description Over-All Width Tapped For Part Number C Type Clamp Parts Stock Number Description CS-6 GCM-2-4 GCS-40 24R-MBP 130 U.S. Customer Care: / FAX Canada Customer Care: / FAX

131 Switchable Magnetic Ground Clamps Tweco is proud to introduce new magnetic ground clamps. Easy Connect & Easy Release On/Off Knob Just Turn Off & Wipe Away Debris Cuts Set Up Time Manual Welding Products & Accessories Part Number Stock Number Amp Height Width Length Weight SMGC200 SMGC300 SMGC600 Std Pkg Patent Number: 6,707,360 & 7,012,495 International Customer Care: / FAX

132 Manual Welding Products & Accessories Tweco Cable Connectors REPLACEMENT TAPERED MACHINE PLUGS - BALL-POINT CONNECTION Part Number Stock Number Taper Length 1-M-T 2-M-T Taper Dimension Cable Capacity MPC SERIES POSITIVE-CAM MECHANICAL CONNECTION - ZINC PLATED TYPE CABLE & COVER SCREWS Part Number Stock Number Description Type Cable Connection RECEPTACLE CONVERSION ADAPTERS Part Number Stock Number Cable Capacity Fits Cam Locking Machine Receptacle 2-CLC Standard Package 1-MPC 1-MPC-1 1-MPC-2 2-MPC-MC** 2-MPC-1-MC* 2-MPC-2-MC* 4-MPC-MC** 4-MPC-1-MC* 4-MPC-2-MC* 2-1-MPC Fits Tweco Male Plug Ends CABLE CONNECTOR REPLACEMENT PARTS MPC SERIES POSITIVE-CAM - ZINC PLATED TYPE CABLE & COVER SCREWS Part Number Stock Number Description 1R-C 24R-MBP 1-MBP-10 A A U.S. Customer Care: / FAX Canada Customer Care: / FAX

133 Twecolugs Crimp or Solder Type (USE TWECO LUG-SET ) Part Number Stock Number Welding Cable Size Amp Rating Size of Stud Hole T T-62 T T-120 T T-3040 T-40HD-25 T-40HD POWER CABLE LUGS T-810 T-68 T-46 Tweco Terminals and Twecolugs TWECO SCREW-ON TERMINALS FITS TERMINAL SIZE 1/2" (12,7MM) NC I.D. Solder Socket Std Pkg Manual Welding Products & Accessories Part Number Stock Number Accepts Tweco Connector Number 1-SF-50 2-SF-50 International Customer Care: / FAX

134 Manual Welding Products & Accessories Tweco Female Terminals STUD HOLE SIZE 17/32" (13,5MM) TWECO FEMALE TERMINALS Part No. Stock No. 1-AF 1-OF-24 1-OF 2-AF-24 2-AF 2-OF Description Accepts Male Ends Ball-Point Connection Type Lugs STUD HOLE SIZE 17/32" (13,5MM) Standard Package BALL-POINT CONNECTION TYPE LUGS Part No. Stock No C C 40-45C C Description Cable Capacity Standard Package 134 U.S. Customer Care: / FAX Canada Customer Care: / FAX

135 Heavy-Duty Type Lugs MECHANICAL BALL-POINT Part No. Stock No. 140-HD HD-180C 240-HD-180 Description Cable Capacity Size Of Stud Hole Tweco Cable Splicers BALL-POINT TYPE English Package Metric Length Part No. Stock No. Cable Fitting Type Cable Capacity Standard Package BP-410 BP-1030 BP-2040 Panel Receptacles USE WITH MPC CONNECTORS Part No. Stock No BPF 114-TSF 238-TSF 2916-BPF 212-TSF Cable Fitting Type Fits Tweco Connector For Cable Size Cable Attachment Manual Welding Products & Accessories International Customer Care: / FAX

136 Manual Welding Products & Accessories Cable Splicers Part No. Stock No. TS TS-62 TS-120 TS-3040 TS-40HD Part No. Stock No. 12-BP Part No. Stock No Description Welding Cable Size Tube I.D. Tweco Lug-Set Block & Punch FOR USE WITH TWECOLUGS Description Jacket Stripping Cable Cutting Hand Tool Description Standard Package Tweco Shaft Lubricant Part No. Stock No. 1Z-L 8Z-L 5B-L Description 136 U.S. Customer Care: / FAX Canada Customer Care: / FAX