PREPACKAGED AVIATION FUEL TANKS AND EQUIPMENT CITY OF HORNELL, NEW YORK 82 MAIN STREET HORNELL, NEW YORK 14843

Transcription

1 BID ADDENDUM NO. 1 PROJECT: PREPACKAGED AVIATION FUEL TANKS AND EQUIPMENT CITY OF HORNELL, NEW YORK 82 MAIN STREET HORNELL, NEW YORK LABELLA PROJECT NO: DATE: FEBRUARY 11, 2016 FROM: LaBella Associates, D.P.C. 300 State Street, Suite 201 Rochester, New York Include this Addendum as part of the Contract Documents. It supplements portions of the original specifications/project manual and drawings, the extent of which shall remain, except as revised herein: BY: Curtis A. Ecklund, P.E. LaBella Associates, D.P.C. 300 State Street, Suite 201 Rochester, NY (585) (585) Fax cecklund@labellapc.com SIGN this Addendum below acknowledging receipt and understanding, INSERT this page in the bidding document, and RETURN it with your Bid. The undersigned bidder acknowledges receipt and understanding of Addendum No. 1, 2016 Name of Company Authorized Signature

2 BID ADDENDUM NO. 1 February 11, 2016 Prepackaged Aviation Fuel Tanks and Equipment AD.01 Page 2 City of Hornell, New York LABELLA PROJECT # This Addendum contains 8 pages including the cover page. TO THE SPECIFICATIONS: GENERAL INSTRUCTIONS TO BIDDERS On Page 4, DELETE the entire section entitled Minority and Women Business Enterprise (M/WBE) Participation Plan On Page 4, INSERT the following text after the Bid Opening and Award section: Start and Completion of the Work The Contractor shall submit shop drawings within fourteen (14) days of receipt of the written Notice to Proceed as issued by the City. The Contractor shall deliver the tanks and equipment, and complete testing within ninety (90) days of receipt of approved shop drawings. SECTION ABOVEGROUND FUEL STORAGE TANK REPLACE the entire SECTION ABOVE GROUND FUEL STORAGE TANK, with the attached SECTION ABOVEGROUND FUEL STORAGE TANK, AD.01 page 3 through AD.01 page 8. END OF BID ADDENDUM NO. 1

3 SECTION ABOVEGROUND FUEL STORAGE TANK PART 1 - GENERAL 1.1 SUMMARY: A. This Section includes the requirements for installing aboveground fuel storage tank system. B. Each tank shall meet the requirements of 6 NYCRR 613. C. The tank shall be a factory fabricated, double-wall steel storage tank with integral secondary containment and appurtenances specified. D. One tank is to be used for storage of Aviation Gasoline and the other tank for storage of Jet A fuel. 1.2 REFERENCES: A. Applicable Codes and Standards: 1. American Society for Testing and materials (ASTM): a. A36 - Carbon Structural Steel. b. A53 - Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless. c. A234 - Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated Temperatures. d. A283 - Low and Intermediate Tensile Strength Carbon Steel Plates. 2. American National Standards Institute (ANSI): a. B Chemical Plant and Petroleum Refinery Piping. 3. National Fire Protection Association (NFPA): a Flammable and combustible Liquids Code. 4. Underwriters Laboratories (UL): a Standard for Safety for Rapid Rise Fire Tests of Protection Materials for Structural Steel. b Protected Aboveground Tanks for Flammable and Combustible Liquids. 1.3 SUBMITTALS: A. Contractor shall provide Shop Drawings for approval on the tanks and all accessories and appurtenances. Submit the following product data. 1. Aboveground fuel storage tank including spill containment fill sump, fill cap and fill adapter. 2. Fuel level gauge, vents, and all valves. 3. Electronic single hose retail remote dispenser. ABOVEGROUND FUEL STORAGE TANK AD.01 page 3

4 4. Contractor shall provide submittals on all piping, valves, locations and fittings prior to installation. 1.4 QUALITY ASSURANCE: A. Manufacturer's Qualification: Firms regularly engaged in manufacture of aboveground storage tanks, of types and capacities required, whose products have been in satisfactory use in similar service for not less than 10 years. 1.5 DELIVERY, STORAGE AND HANDLING: A. Comply with manufacturer's rigging and installation instructions. B. Stored items shall be protected from the weather and contamination. Proper protection and care of material before, during, and after installation shall be the Contractor's responsibility. Any materials found to be damaged shall be replaced at the Contractor's expense. During installation, piping and similar openings shall be capped to keep out dirt and other foreign matter. PART 2 - PRODUCTS 2.1 MANUFACTURERS: A. Basis of Design Products: Subject to compliance with requirements, provide products by one of the following, or request approval for substitutions: 1. Aboveground Storage Tanks: a. Lancaster Tanks Steel Products, Buffalo, NY b. Approved equal. 2. Appurtenances a. Manufactures listed are basis of design products. Provide products shown or request approval for substitution of equivalent products. 2.2 JET A FUEL STORAGE TANK: A. Steel Storage Tank: Furnish an aboveground, horizontal, double-wall, steel storage tank. The tank shall be in conformance with the Underwriters Laboratories' UL-142 specifications and so labeled. 1. 5,000 gallon, 8 foot diameter, horizontal, double wall aboveground storage tank with 1,000 gallon (20%) spill over compartment, 2-24 manway assy., 2-8 emergency vent openings, misc. threaded/flanged openings, 1-2 interstitial monitoring port, two integral saddle supports with integral porch and canopy, interior lined with epoxy for Jet A, exterior finished with macropoxy and acrolon polyurethane. B. Emergency Vent: two eight inch (8 ) vents, Morrison 244OM C. Updraft Vent Cap: one three inch (3 ), Morrison 354T ABOVEGROUND FUEL STORAGE TANK AD.01 page 4

5 D. Clock gauge: one two inch (2 ), Morrison 918C with alarm E. Drop Tube: one two inch (2 ), compatible with clock gauge F. Overfill Prevention: Morrison 9095AA (3 x 6 ) AST overfill prevention valve for fill port 1. Morrison 419 (3 ) drop tube 2. Morrison 691B (3 ) locking ball valve 3. Morrison 246ADI (3 ) swing check valve 4. Morrison 800A (3 ) male adaptor 5. Morrison 800DC (3 ) dust cap F.G. Tank Vent Pipe: The tank shall be vented at the top of the tank with a three inch diameter Schedule /304L stainless steel pipe. The pipe length shall be of sufficient length to extend 6 feet above the tank and be terminated with a open updraft vent. H. Thief Pump: Provide a manually operated thief pump at the low end of the tank and accessible from grade. The sampling tubing shall be stainless steel. The inlet end of the tubing shall be ¼ inch from the bottom of the tank. G.I. Aircraft Refueling Skid System: Skid frame unit set up to off-load transport at 100 GPM and to fuel into-plane overwing/singlepoint at 75 GPM. The fuel shall be filtered in and out and recirculate. The system shall include steel fuel pipe/fittings completely assembled, prewired, and pressure tested and include the following: 1. Nibco LD buna lug type butterfly shut-off valves API Blackmer Gx2.5B pump with 5HP explosion proof motor 230/460 volts 3 phase 3. Facet API/EI 1581, Fifth edition filter separator with air eliminator, pressure relief, GTP-534-PB-15A differential pressure gauge, psi pressure gauge, sample ports, GTP electric 1cc electrical water defense system and stainless steel spring closed manual drain valve watt filter separator sump heater 5. 4 camlock tank inlet adaptor with locking dust cover 6. Morrison 246ADI pump inlet check valve 7. Morrison 286 pump inlet strainer with stainless steel basket 8. Total Controls SPA4AT meter, 1/10 USG register with air eliminator/strainer (certified public sale) 9. Hannay electric rewind hose reel ½ x 75 Aviation fueling hose OPW 295SAJ0200 overwing nozzle Whittaker F-116 GVX7D single point nozzle with 45 psi hose end pressure control valve Singlepoint nozzle holder with deadman override switch GTP 8392B electrical deadman control with 80 cord (designed to turn-off pump motor) aluminum floating suction assembly Morrison 515 (3 ) 15 gallon AST remote spill container Gammon dry break coupler with overwing/single point inter-change American spring rewind static grounding reel with 100 stainless steel coated cable Explosion proof NEMA 7-9 enclosure with size one motor starter ABOVEGROUND FUEL STORAGE TANK AD.01 page 5

6 Produce piping before and, after filter with SCH10 304/304L SS Omntec LU2 two channel liquid sensing audio visual controller with one L-2-S two point Liquid level sensor for high and high level for pump shutdown. 22. Fill Rite FR150 piston hand pump for sumping/sampling 23. External emergency valve, Morrison 346 FDI Anti-siphon valve on suction piping H.J. Equipment Identification: Apply appropriate NFPA and OSHA labels. Labels or safety decals shall be applied at the factory in controlled conditions ensuring proper adhesion. 2.3 AVGAS FUEL STORAGE TANK: A. Steel Storage Tank: Furnish an aboveground, horizontal, double-wall, steel storage tank. The tank shall be in conformance with the Underwriters Laboratories' UL-142 specifications and so labeled. 1. 5,000 gallon, 8 foot diameter, horizontal, double wall aboveground storage tank with 1,000 gallon (20%) spill over compartment, 2-24 manway assembly, 2-8 emergency vent openings, misc. threaded openings, 1-2 interstitial monitoring port, two integral saddle supports with integral porch and canopy, exterior finished with macropoxy and acrolon polyurethane B. Emergency Vent: two eight inch (8 ) vents, Morrison 244OM C. Pressure Vacuum Vent Cap: one three inch (3 ), Morrison 748A D. Clock gauge: one two inch (2 ), Morrison 918 with alarm E. Drop Tube: one two inch (2 ), Morrison 419 F. Remote Spill Container: Morrison 515 (3 & 3 ) 15 gallon AST remote spill container for fill port dual port G. Thief Pump: Provide a manually operated thief pump at the low end of the tank and accessible from grade. The sampling tubing shall be stainless steel. The inlet end of the tubing shall be ¼ inch from the bottom of the tank. F.H. Aircraft refueling skid system: skid frame unit including steel fuel pipe/fittings completely assembled, prewired, and pressure tested. G.I. Overfill Prevention: Morrison 9095AA (3 x 6 ) AST overfill prevention valve for fill port 1. Morrison 419 (3 ) drop tube 2. Morrison 691B (3 ) locking ball valve 3. Morrison 246ADI (3 ) swing check valve 4. Morrison 800A (3 ) male adaptor 5. Morrison 800DC (3 ) dust cap 6. Morrison 323 (4 x 3 ) vapor recovery adaptor 7. Morrison 323C (4 ) vapor recovery cap ABOVEGROUND FUEL STORAGE TANK AD.01 page 6

7 H.J. Single Hose Remote Retail Dispenser: Wayne Select single hose electronic retail remote dispenser with slow down valve, pulse output and pump control relay, labeled AVGAS 1. FE Petro STP 075 ¾ HP submersible pump 2. Morrison 710 (2 ) electric solenoid valve 3. Morrison 691B (2 ) locking ball valve 4. Morrison 636M (1 ½ ) emergency shear valve 5. Facet Series 21 filter with fuel guard element 6. Hannay electric rewind hose reel 7. 1 x 75 aviation fuel hose 8. OPW 295 SA nozzle 9. American spring rewind static grounding reel with 100 stainless steel coated cable Produce all piping before and after filter with SCH10 304/304L SS. I.K. J.L. Tank Vent Pipe: The tank shall be vented at the top of the tank with a three inch diameter SCH10 304/304L SS pipe. The pipe length shall be of sufficient length to extend 6 feet above the tank and be terminated with a pressure vacuum vent. Equipment Identification: Apply appropriate NFPA and OSHA labels. Labels or safety decals shall be applied at the factory in controlled conditions ensuring proper adhesion. PART 3 - EXECUTION 3.1 INSTALLATION: A. Storage tank shall be handled with extreme care to prevent damage during placement and shall be installed in accordance with the manufacturer's installation instructions and NFPA 30. The exterior surface of the tank shall be inspected for obvious visual damage prior to and proceeding the placement of each storage tank. Surface damage to a storage tank shall be corrected according manufacturer's requirements before proceeding with the system installation. B. Scope of Work for installation of the fuel storage tank shall include the following: 1. Install tank on level surface, location to be determined in the field. 2. Install overfill control valve as indicated. 3. Install vents, gauges, spill containment sump. C. Equipment: 1. Equipment shall be properly leveled, aligned, and secured in place in accordance with manufacturer's instructions. Supports shall be provided for equipment, appurtenances, and pipe as required. Anchors, bolts, nuts, washers, and screws shall be stainless steel and installed where required for securing the work in place. Sizes, types, and spacing of anchors and bolts not indicated or specified shall be as required for proper installation. ABOVEGROUND FUEL STORAGE TANK AD.01 page 7

8 3.2 TESTS: A. Testing: Pressure and leakage testing of tank and piping shall be accomplished by the Contractor in the continuous presence of the OWNER S REPRESENTATIVE. Under no circumstances shall the pressurized system be left unattended during the test period. Primary tank and annular space shall be tested with air pressure at 5 psi in accordance with NFPA 30 or 58. An air gage with quarter pound increments shall be used to take readings. Procedures for pressure testing to the tank manufacturer's recommendations shall be approved by the OWNER S REPRESENTATIVE. B. Liquid Tightness: All underground sumps shall prevent outside surface and ground water from coming into the container and prevent any product originating from within the sump from escaping into the underground environment. Hydrostatic testing on all sumps after installation to check for proper sealing of joints and connections. C.B. System Performance Tests: After all components of the system have been properly adjusted, the system shall be tested to demonstrate that the system meets the performance requirements for which it was designed. The Contractor is to provide at least 3 days notice of testing to the Owner so that personnel can be provided to witness the testing. The maximum rated capacity of the system shall be tested by using several tank trucks simultaneously, if applicable. The use of tank trucks shall be coordinated with the OWNER S REPRESENTATIVE prior to testing. If any portion of the system or any piece of equipment fails to pass the tests, the Contractor shall make the necessary repairs or adjustments and the test shall be repeated until satisfactory performance is obtained. The tests shall demonstrate the following: 1. The capability of each fuel pump to deliver the indicated flow of fuel. 2. The alarm and control panels are operational and perform as designed. 3. Each fuel meter is operating accurately. 4. Vent piping is clear of debris and each pressure/vacuum relief vent is operating properly. 5. Anti-siphon valve is operational. END OF SECTION ABOVEGROUND FUEL STORAGE TANK AD.01 page 8