Bodywork Training Program 2017
|
|
- Gwendoline Ford
- 6 years ago
- Views:
Transcription
1 Bodywork Training Program 2017 March 2017 KTD GmbH Seite 1
2 Foreword In order to accomplish bodywork repairs qualitatively at reasonable prices, fundamental technical skills as well as a comprehensive knowledge of modern repair technologies are required. What has been learned within "basic education" is often no longer sufficient to meet the rapid technological progress. If bodywork and paint repairs are not professionally handled, the calculated profit simply remains on the line. The losses to be recorded are not due to the fact that the calculations are too low, but rather to the inefficiency of the operating business. The car body and paint specialists of the KTD GmbH have developed a modular training concept, which leads step by step to the individual qualification of interested or generally technically savvy personnel due to the many years experience for workshop personnel. At the same time, the "professionals" can further qualify in the new current repair techniques and test available tools and materials. Due to the modular training structure, "interested newcomers" in the body shop are not overwhelmed and professionals are only confronted with topics which serve their further qualification. Note: Before you select employees for a training, please check their suitability or prerequisite. This means that you can already make sure that the costs for the respective training are sensibly placed and that the Return off investment is then made for the investment. Training description The developed trainings are specifically geared to the current requirements in the repair business. Thus, the finding of water leakage and disturbing noise is trained as well as the craft aspect in the repair of high-strength steel plates. The reliable recognition of the total scope of damage and the exact determination of the repair costs can be learned as well as the precise capture of measuring points using modern measuring technology. The spectrum of the body training is rounded off by qualification measures in the painting preparation and the paint repairs. In all trainings, we attach great importance to "practical proximity", as it occurs in the real repair business. During the trainings the participants can work with up-to-date equipment and try new tools and materials. Depending on the requirements and the intensity, the trainings are carried out in smaller groups, so that the intensive supervision by the respective trainer is ensured. This approach guarantees the greatest possible training success and certainly leads to the desired training goal. March 2017 KTD GmbH Seite 2
3 Ford Bodywork and assembly techniques new Ford models Model specific information about manufacturing and assembly features as well as repair tips for the latest vehicle models. Models and dates upon request! Technical shop personnel with experience in bodywork. Description Benefit In the training course for auto body and assembly techniques on new Ford models, only current topics from the auto body repair manual and construction and manufacturing characteristics will be taught. Further elements are assembly techniques of attachments and individual repair tips for an expert and economical repair. Current auto body repair techniques Information on manufacturing and assembly characteristic Mounting and dismounting of auto body attachments Adjustment and calibration work Repair materials and the latest tools Model specific repair tips Influence of modern assistance systems on body- and assembly work Applications and work with the IDS diagnostic tool in bodywork Handling of vehicle-specific repair instructions Ford Etis / day plus tax March 2017 KTD GmbH Seite 3
4 Ford Basic diagnostics for bodywork and paint specialists Diagnosis of electrical vehicle systems This course is designed for auto body and paint specialists who have little or no previous knowledge in automotive electrical systems. This course gives you an overview of the fundamentals of automotive electric and electronic technology in order to be able to perform simple electronic work yourself and be able to assess problems. The content is also suitable for employees whose training took place some time ago. Description and benefit of the training course Electrical Assistant and Comfort Systems is an integral part of modern vehicle construction. For timely accident repairs, it is therefore important to master the fundamentals of automotive electrical diagnostics. Together with Ford we have developed a two-day training course. Basics of automotive electrical systems Measuring with the multimeter Determining simple electrical errors with the multimeter Important terminal designations Circuit symbols and their functions Reading and using circuit plans when Troubleshooting Repair of electrical cable damage Reading and deleting errors with the diagnostic device Adjustment work (headlight systems, rain sensor, ) with the help of the diagnostic tester Networked systems and their advantages and disadvantages Diagnostic strategies and case studies / day plus tax March 2017 KTD GmbH Seite 4
5 Ford Professional vehicle preparation Practical training for professional vehicle preparation Personnel for vehicle preparation / vehicle assessment Description Benefit Optimally prepared used vehicles, in addition to new vehicles, represent the quality standards of your dealership. Thus, you can already show your customers from your used vehicle lot what they can expect once inside. The goal of the training course is to increase the sales and value of your used Ford vehicles through effective and targeted preparation methods. In the training course, methods and products to be presented for vehicle preparation are available. These can of course be extensively tested by the participants. The training course also includes the limits of preparation and the source of possible errors. Paint treatments (polishing and sealing) Interior cleaning (upholstery, floor coverings) Repair of upholstery and leather damage Plastic Treatments Removal of small scratches Possible spot repairs / day plus tax March 2017 KTD GmbH Seite 5
6 Ford Tips and tricks for paint refinishing and repairs Professional and economical painting methods, timely and efficient repairs. Experienced painting personnel, service advisors body and paintwork. The participants receive the latest Ford information relating to the area of painting. In this hands-on training course, problems with technical applications are discussed. The participants then have the possibility to apply and expand on what they have learned with hands-on exercises. The impact of the current structure of factory paint on warranty repairs and tips for efficient paint refinishing are part of the training course. Through the use of current industry examples, participants are able to see how economic efficiency can increased without reducing refinishing quality. Effective implementation of Ford Repair Directives Tips and tricks in working with special effect colours Measures for colour matching Working with colour matching devices Touch-ups and Smart-Repair Working with matt coatings Instructions for foiling techniques / day plus tax March 2017 KTD GmbH Seite 6
7 Ford MIG soldering in auto body repair Introduction to the material- and corrosion-resistant joining technology Experienced bodywork professionals Due to the increased use of high-strength heat-treated or galvanized steel sheet metal, classic welding methods with process-related high heat input function only partially. MIG soldering offers the advantage of being able to work with much lower temperatures. The negative effects on the material strength from structural changes are thus reduced. Similarly, anti-corrosion coatings (aluminium coating, galvanizing) show significantly less damage. Despite all the advantages, it should be remembered that the solder used has generally a lower strength than the material to be joined. It is therefore particularly important to ensure a quality connection of the solder joint with MIG soldering. The course teaches all methods necessary to produce a professional solder joint. The predominantly practically-oriented course offers each participant the opportunity to practice and improve his soldering skills. Practical welding exercises for all solder types used in auto body repair Use of various MIG soldering devices Error detection and avoidance Material science Theoretical fundamentals / day plus tax March 2017 KTD GmbH Seite 7
8 Ford Dent repair without paint damage Removal of parking and hail damage Experienced painting or body work personnel The participants are taught through intensive training the various repair techniques for dent repair without paint damage. In addition to teaching theoretical fundamentals and commonly available tools, our focus is on the acquisition of technical skills gained by ongoing practice on auto body parts. Dent repair without paint damage serves as a supplement to the existing portfolio of services offered by every Ford body specialist operation. Comprehensive customer service and improved customer loyalty are the main advantages of this repair method in addition to the additional business that it generates. Assessment of the damage pattern and determination of the optimal repair path Use of various dowel-press Tool Use of gluing technology for dent repair Repair work on original vehicle parts Repair work on complete vehicles / day plus tax March 2017 KTD GmbH Seite 8
9 Ford Glazing removal / re-glazing Primarily practical training on the safe removal of automotive glazing Experienced body work personnel with customer contact experience, service advisors body and paintwork The re-glazing of motor vehicles offers growth opportunities for your body shop. Tie your customers to your dealership by demonstrating your competence in this Business area as well. For commercial repairs, for example the removal and replacement of vehicle glazing, it is always important to work with the correct tools. In the training course, you will receive an overview of current repair techniques and have the opportunity to thoroughly test them. In addition to the standard front disc replacement, special cases such as side or rear window replacement are also handled. Theoretical fundamentals Tasks and function of a slices gluing Comparison of current removal tools and their advantages and disadvantages Removing several slices with the tools recommended by Ford Installation of the slices with the adhesives approved by Ford Avoiding processing and user Errors Safety information and accident prevention 1 day / day plus tax March 2017 KTD GmbH Seite 9
10 Ford Exterior dent repair Practical training for current repair techniques Experienced auto body personnel, service advisors body and paintwork Just as auto body techniques have changed in recent years, repair technology for auto body exteriors has radically evolved. Through constantly updated joining techniques in vehicle production, it is becoming increasingly important in auto body repair to preserve the original bond of the chassis. The trend in auto body repair is thus to regenerate rather than replace body parts. Decisive advantages of regenerating rather than renewing are: No or reduced assembly work Preserving the original chassis bond from the manufacturer Preserving the original corrosion protection of the manufacturer Reducing loss of value on the sale of the vehicle Reduced repair time when using the correct technology Shock-free removal of the damaged area, thus less tension on the material Theoretical fundamentals of materials science and dent repair techniques Assess and remove dents and bumps Additions to vehicle and problem analysis Practical exercises with different technologies Removing dents - grazing damage Reshaping work on wheel arches, sills Manufacture of edges and contours Removal of wide-area damage Usage and combination of various tools Assessment of paint damage and its repair and care / day plus tax March 2017 KTD GmbH Seite 10
11 Ford Aluminium repairs Practical training for the repair of aluminum vehicle parts Experienced auto body personnel The use of aluminium as an auto body work material has been steadily on the rise for years. The main advantage of weight reduction is offset by the disadvantage of a higher price. This means that the repair of a damaged auto body part is often preferable to exchanging it. Aluminium repair is much different from classic steel repair. Significant differences already exist in the design of the workplace and also in the selection of appropriate tools and machines. Basic technical skills and capabilities must be learned. There are limits on repair work which must be observed if one wants to avoid high costs. Fundamentals and materials science Repair and machining of aluminium body panels Introduction to dent repair techniques Exterior dent removal for small dents Exterior bodywork for major damage Thermal retraction Fundamentals of aluminium welding techniques Assessment of the damage image and determining the appropriate repair method / day plus tax. March 2017 KTD GmbH Seite 11
12 Ford Bonding and riveting in auto body repair Practical training of the current repair techniques Experienced body work personnel Cold joining method, commonly called bonding and riveting, is increasing used in auto body repair. The advantages of cold joining are obvious: No heat distortion of the components thereby reducing rework No temperature-related damage to the factory applied corrosion protection No structural changes and resulting alteration in strength properties of high and highest strength steel components Reduction in work times This course is designed by the manufacturer, but focuses on Ford's already released adhesive repair solutions, for example the roof repair of the current Ford Mondeo. In addition, the training prepares the participants for the future challenges in the body repairs. Through a very practically oriented course, participants will learn all the requirements and skills necessary for professional auto body repairs in the area of bonding. Fundamentals of cold joining techniques Materials and tools for professional repairs Necessary preparatory work Various joining techniques (bonding and riveting) Recognizing and avoiding errors in cold joining Development of metal spatulas and spongy-material substitutes Installation of glued outer skin The course is based on the manufacturer s repair requirements. The participants have the ability to perform all of the work steps themselves thus acquiring the knowledge and skills to perform the various repair methods. Realistic bodywork repairs carried out on the basis of the manufacturer s specifications / day plus tax March 2017 KTD GmbH Seite 12
13 Ford Advanced bodywork training Mechanical sheet metal work, bodywork and measuring technology, using common joining techniques Technical shop personnel with entry level body work experience This training is intended to provide an introduction to body repair. Smaller car body damage can often be repaired without the use of expensive straightening systems. It is important to master the necessary techniques and to use the appropriate tools. The training gives you an overview, but cannot replace our themenity-specific courses. Instruction in working and safety precautions Professionalism cutting of welded components Application of mechanical and thermal sheet processing techniques Use of different welding techniques Production of continuous surfaces Introduction to electronic body measurement techniques Replace a welded body part / day plus tax March 2017 KTD GmbH Seite 13
14 Ford In-depth bodywork training Replacement part repair, repair in auto body structure area, high and higher-strength materials, specific joining techniques Technical shop personnel with experience in bodywork This training is a continuation of the advanced training course and gives the participants knowledge for further repair work. The Intervention in the vehicle bodywork or the structure area of a vehicle does not mean everyday work and therefore requires extensive knowledge and skills. These include: partial replacement of structural and load-bearing body parts, return deformation to original dimensional accuracy with straightening and measuring systems, handling and treatment of highstrength car body materials and light metal constructions as well as the safe mastery of the differentspecific joining techniques. The training serves as a continuation for graduates of the construction training or as a refresher for the trained bodybuilder who carries out rare structural repairs. Instruction in working and safety precautions Partial replacement in bodywork composite and structural area Re-forming using classic and electronic straightening and measuring systems Handling and treatment of sensitive auto body materials, for example highly resistant steels / day plus tax March 2017 KTD GmbH Seite 14
15 ZKF 1 Aluminium repair on outer skin parts Together with ZKF, we offer a two-day course "Aluminum repairs on outer skin parts". The course is designed for experienced body personnel with experience in steel / sheet metal processing. Repair and machining of aluminium outer skin parts Introduction to dent repair techniques Exterior dent repair to minor dents Exterior repairs for major damage Exterior repairs for major damage with the use of heat Thermal retraction Damage image and repair procedure Perform repair with use of bonding and riveting techniques plus tax per participant (for ZKF member companies) plus tax per participant March 2017 KTD GmbH Seite 15
16 ZKF 2 Cold-joining technique in auto body repair Together with ZKF, a 2-day course in cold-joining methods in auto body repair is conducted on current BMW vehicles. Cold joining processes have decisive advantages No temperature application, no change in material structure and strength No heat distortion in the connection area No destruction of surface corrosion protection (sheet metal coatings) Connection of different materials possible (for example steel with aluminum or plastic) Higher strength, stability and durability than conventional welded joints Through a very practically oriented course, participants will learn all the requirements and skills necessary for professional auto body repairs in the area of bonding. Basics of cold joining Technology Materials and tools for professional repairs Necessary preparation work Various adhesive techniques Various riveting techniques (punch riveting, full riveting) Recognizing and avoiding errors in cold joining Removal of glued body parts in case of repetitive repairs Appropriate loosening of rivet connections and new riveting Working and special features in high-strength rivet Joints Processing metal spatula instead of tin The course is based on the manufacturer s repair requirements. The participants have the ability to perform all of the work steps themselves thus acquiring the knowledge and skills to perform the various repair methods. Realistic bodywork repairs carried out on the basis of the manufacturer s specifications plus tax per participant (for ZKF member companies) plus tax per participant March 2017 KTD GmbH Seite 16
17 ZKF 3 Electrical system diagnostics in auto body repair - basics Electrical assistance and comfort systems have maintained an ever-increasing role in modern vehicle construction. For timely accident repairs, it is therefore important to understand these systems and master the fundamentals of automotive electrical diagnostics. Together with ZKF, we have developed a twoday training course. This course give you insight into networked vehicle systems. It teaches you the skills and fundamentals that you need to to bring a vehicle after body repair back into operating condition electronically. The objective of the course is to increase your shop capacity and keep a lucrative diagnostics business in house. The course has a 70% practical content and offers the opportunity to become familiar with various diagnostic units and be able to compare them directly with one another. Devices from Bosch, Gutmann and AVL Fundamentals of vehicle electrical / electronics Measurement methods using a multimeter Networked systems in motor vehicles and the impact on the diagnosis Reading circuit diagrams, recognizing connections and performing practical applications Structured approach in error diagnosis (test plan) Practical work with various diagnostic devices on modern European vehicles Read error codes, evaluate and remedy Re-program vehicle plus tax per participant (for ZKF member companies) plus tax per participant March 2017 KTD GmbH Seite 17
18 ZKF 4 Electrical system diagnostics in auto body repair advanced training For participants with good fundamental electronic knowledge, for example, participants who have already attended the basic course, we developed a new advanced course. Use of the oscilloscope in diagnostic devices Signal types of sensors and actuators Differences between various data bus Systems Use of electric circuit diagrams Modern lighting Systems Modern driver assistance Systems Modern on-board power Systems Measuring exercises on the vehicle of the mentioned Systems Performing programming, basic settings and adjustments with diagnostic Equipment Possibilities of re-programming the control Units Developing diagnostic strategies plus tax per participant (for ZKF member companies) plus tax per participant March 2017 KTD GmbH Seite 18
19 ZKF 5 Specialist for work on HV intrinsically safe vehicles ZKF arranged 2-day courses Specialist for work on HV intrinsically safe vehicles exclusively for ZKF member companies. Due to the expected future increase in hybrid vehicles, the professional association has called for a specialist for working on HV intrinsically safe vehicles such as hybrid vehicles. Course requirements The course Specialist for work on HV intrinsically safe vehicles is open to bodywork and chassis builder Masters as well as Master automotive technicians. Further participants could be vehicle electricians, vehicle mechanics and vehicle mechatronics with training completed after Auto body and vehicle mechanics with training qualifications after 2002 are also eligible for the course. Fundamental electro-technical knowledge Alternative fuels and Propulsion Structure, function and operation of HV vehicles Protective measures against electrical shock and electrical arcs Electrical hazards and first aid Definition "HV intrinsically safe vehicles Professional responsibility General safety rules and safety instructions Practical procedures when working with HV vehicles and Systems Practical exercises and demonstrations Course execution Level 1: The course participants must complete a written entry test prior to the start of the course. Should a participant lack technical knowledge, the theory portion must be learned through self-study. Level 2: 2 day course Specialist for work on HV intrinsically safe vehicles at KTD in Calw. Level 3: Examination at the end of the course plus tax per participant (for ZKF member companies) plus tax per participant March 2017 KTD GmbH Seite 19
Bodywork Training Program 2018
Bodywork Training Program 2018 January 18 KTD GmbH Seite 1 Foreword In order to accomplish bodywork repairs qualitatively at reasonable prices, fundamental technical skills as well as a comprehensive knowledge
More informationE-Mobility Trainings. Handling electric drives safely. TÜV SÜD Akademie GmbH
E-Mobility Trainings Handling electric drives safely TÜV SÜD Akademie GmbH 01 02 E-Mobility Trainings Handling electric drives safely Electric vehicle drives are gaining ground in both hybrid and pure
More informationAutomotive. Automotive Body and Repair
Automotive Body and Repair This program is designed to prepare the student for employment as a body repair and paint apprentice in privately owned repair shops or automotive dealerships. A student could
More informationAutomotive Technology
It is the mission of the Automotive Department of Victor Valley Community College to provide quality automotive instruction to a diverse community of students; the array of courses offered shall serve
More informationAuto Service Technician
Auto Service Technician Organization Washburn Institute of Technology Program Number 47.0604 Instructional Level Certificate Target Population Grades 11 & 12 Post-secondary Description The Auto Service
More informationHenkel has expanded its product portfolio with another important component of vehicle repair and maintenance
Press Release 2016/09/12 Henkel has expanded its product portfolio with another important component of vehicle repair and maintenance In good hands Perhaps more than any other, the automotive industry
More informationLow and medium voltage service. Power Care Customer Support Agreements
Low and medium voltage service Power Care Customer Support Agreements Power Care Power Care is the best, most convenient and guaranteed way of ensuring electrification system availability and reliability.
More informationautomotive engineering 2014/15
automotive engineering 2014/15 always the right course Contents Automotive Starting Grid...1 Introduction to Automotive Engineering Advanced Skills..1 City & Guilds 4290-11 Level 1 Diploma in Vehicle Maintenance
More informationTraining Program 2018 Where Education Meets Technology
Training Program 2018 Where Education Meets Technology January December 2018 Training Program 2018 At Ziehm Imaging, we are strongly committed to our customers and their patients. Which means a lot more
More informationAutomotive Technology
Automotive Technology diagnostic procedures as an entry-level automotive technician. Certificates Automotive Electronics, Computers, and Emissions and/or HVAC The Automotive Technology program prepares
More informationOverview IMIARBBP13. Remove and Replace Motor Vehicle Body Panels Including Permanently Fixed Panels
Overview This standard is about removing a variety of exterior and sub-structure body panels and panel sections, including permanently fixed panels, where these are damaged and replaced with new or repaired
More informationTraining Courses Regional Competence Center. ABB i-bus KNX KNX Certified Courses Energy Monitoring
Training Courses 2019 Regional Competence Center i ABB-free@home ABB i-bus KNX KNX Certified Courses Energy Monitoring ABB building products are universal in their use but uniform in their purpose: Increase
More informationCHALLENGES AHEAD KEEPING PACE WITH RAPID ADVANCES IN COLLISION REPAIR BY JASON BARTANEN
FEATURE CHALLENGES AHEAD KEEPING PACE WITH RAPID ADVANCES IN COLLISION REPAIR BY JASON BARTANEN As the automotive industry moves deeper into the mobility arena, it also enters a more challenging realm
More informationSTRANDS AND STANDARDS
STRANDS AND STANDARDS BASIC AUTOMOTIVE COLLISION REPAIR Course Description This course is the first in a sequence of courses that prepares individuals in repair and refinishing of uni-bodies and fenders
More informationServo-pneumatic drive solution for welding guns. Top quality welding!
Servo-pneumatic drive solution for welding guns Sturdy and precise! Top quality welding! Highlights Extremely short cycle times High quality and outstanding reproducibility of the spot welds Excellent
More informationELECTRICAL TECHNOLOGY 3 March 2008
I. Course Description ELECTRICAL TECHNOLOGY 3 March 2008 The purpose for this course is to instruct potential electricians in the skills necessary for entry into the job market. During this course, the
More informationLife cycle services for protection and control relays Full support from start to finish
Life cycle services for protection and control relays Full support from start to finish The main purpose of the protection and control relay is to protect both human lives and equipment as well as ensure
More informationIAE-101: Electrical Fundamentals for Non-Electrical Personnel
IAE-101: Electrical Fundamentals for Non-Electrical Personnel Abstract Today s world of rapidly evolving technology poses a wealth of challenges just to remain competitive in the marketplace. Everyone
More informationLCC has small class sizes to give you the foundation you need to be a successful Collision Repair technician.
Auto collision repair technicians are employed by collision repair shops, new car dealerships, refinishing businesses, auto restoration shops, and automotive manufacturers/suppliers. Formal training in
More informationElectrical Equipment and Safety: Operation, Control, Maintenance and Troubleshooting
Electrical Equipment and Safety: Operation, Control, Maintenance and Troubleshooting Page 1 of 6 Why Attend This course covers the theoretical and practical operation of common electrical equipment and
More informationOverview IMIARBBP14. Identify and Rectify Major Repairs to Motor Vehicle Body Panels. Identify and Rectify Major Repairs to Motor Vehicle Body Panels
Overview This standard is about repairing complex and difficult to access damage to a range of body panel types using a variety of preparation and reinstatement techniques, including hydraulic reforming
More informationAAS, Associate of Applied Science Degree, Auto Collision Technology Auto Body Repair Texas State Technical College, Harlingen Texas 2006
Donald L. Wilt Jr. donald.wilt@harlingen.tstc.edu Teaching Lab Assistant Building F Autobody Collision Technology 1902 N. Loop 499 Harlingen TX. 78550 (956) 364-4824 EDUCATION: AAS, Associate of Applied
More informationBasic Automotive Collision Repair
Basic Automotive Collision Repair EXAM INFORMATION Items 43 Points 45 Prerequisites NONE Grade Level 10-12 Course Length ONE SEMESTER DESCRIPTION This course prepares individuals to repair automotive,
More informationTHE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting
THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine
More informationAutomotive Service and Technology
144 Automotive Service Degrees and Certificates Associate in Science Degree: Automotive Service Certificate of Achievement: Automotive Service Program Description The automotive industry has long recognized
More informationVariable Valve Drive From the Concept to Series Approval
Variable Valve Drive From the Concept to Series Approval New vehicles are subject to ever more stringent limits in consumption cycles and emissions. At the same time, requirements in terms of engine performance,
More informationelektronik Designing vehicle power nets A single simulation tool from initial requirements to series production
www.atzonline.de elektronik 04 April 2013 Volume 8 Offprint from ATZelektronik 4/2013 Springer Automotive Media Springer Fachmedien Wiesbaden GmbH for Bosch Engineering Designing vehicle power nets A single
More information2016 Ferrari CORSO PILOTA 1
2016 Ferrari CORSO PILOTA 1 CONTENTS 4Overview 6 Course Structure 8Corso Pilota Sport 10 Corso Pilota Advanced 12 Corso Pilota Evolution 14 Corso Pilota Challenge 16 Fleet of Vehicles 18 Circuits & Accommodations
More informationAutomotive Technology. Resources
Automotive Technology Resources Automotive Technology: A Systems Approach Third Canadian Edition Jack Erjavec, Martin Restoule, Stephen Leroux, Rob Thompson 9780176531522 Advancing technology continues
More informationAutomotive & Diesel Technology
AUTO 133 Automotive Suspension/Steering (3.5 credit, 2 lecture, 3 lab) Instruction in skills needed to diagnose, service, and repair modern automotive suspension/steering systems. Suspension/steering designs,
More informationTraining at its best
Training at its best MAN Diesel & Turbo Courses Offered Worldwide We are committed to ensuring our customers gain the best qualifications possible, so that the operation and maintenance of equipment and
More informationAutomotive Technology
Degree: A.S. - Automotive Analysis A.S. - Automotive Collision Technology A.S. - Automotive Component Service Technician A.S. - A.S. - Diesel Mechanics Certificates: Automotive Analysis Automotive Claims
More informationThe Learning Outcomes are grouped into the following units:
Component Specification NFQ Level 4 Digital Tachograph Operation Skills 4N2326 1. Component Details Title Teideal as Gaeilge Award Type Code Digital Tachograph Operation Skills Scileanna Oibrithe Tacagraif
More informationAUTOMOTIVE TECHNOLOGY (AUTO)
Automotive Technology (AUTO) 1 AUTOMOTIVE TECHNOLOGY (AUTO) AUTO 100 Automotive Technology and Maintenance for the Consumer 3 Units (AA/AS; CSU) 54 lecture hours, 18 lab hours Intended for non-majors.
More informationAutomotive Service and Technology
146 Automotive Service Degrees and Certificates Associate in Science Degree: Automotive Service Certificate of Achievement: Automotive Service Program Description The automotive industry has long recognized
More informationQuick, easy and efficient: Bosch exchange
Quick, easy and eicient: Bosch exchange Bosch exchange: The comprehensive exchange range from a single supplier Present value repair is ever more in demand, particularly for older vehicles. With a broad
More informationYouth Guarantee Courses 2019 National Certificates at levels 2 and 3
EDUCATIONAL SERVICES LTD Driving your career forward Youth Guarantee Courses 019 National Certificates at levels and 3 Zero fees apply for all Youth Guarantee learners Open to learners 16-19 years Travel
More informationSP41A B-Pillar. Copyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0
Uniform Procedures For Collision Repair SP41A B-Pillar 1. Description This procedure describes the repair and complete or partial replacement of an aluminum B-pillar assembly. Inspection and evaluation
More informationNational Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair
NZQF NQ Ref 1252 Version 3 Page 1 of 12 National Certificate in Motor Industry (Entry Skills) (Level 2) with strands in Automotive Electrical and Mechanical, and Collision Repair Level 2 Credits 80 This
More informationAutomotive Service and Technology
158 Automotive Service & Technology Automotive Service and Technology Degrees and Certificates Associate in Science Degree: Automotive Certificate of Achievement: Automotive Program Description The automotive
More informationWhen I chose the gearbox...
When I chose the gearbox...... I was thinking about the future. Why should I do it differently when it comes to service? www.winergy-group.com Less risks, greater availability Complete service portfolio
More informationINSERT DISTRICT NAME. AUTO BODY REPAIR I and II
INSERT DISTRICT NAME AUTO BODY REPAIR I and CBEDS Codes: 5663 JOB TITLES DOT NO. Auto Body Painter 845.381.014 Auto Body Repairer 807.381.030 Course description: Auto Body Repair I: This course is designed
More informationIMI ACCREDITATION ELECTRIC VEHICLE
ELECTRIC VEHICLE What is IMI Accreditation? IMI Accreditation is a practical, non-academic way to demonstrate individual capability, providing independent proof of current competence, knowledge and skills.
More informationABB life cycle services Uninterruptible power supplies
ABB life cycle services Uninterruptible power supplies 2 ABB Life cycle brochure UPS service portfolio Life cycle services for uninterruptible power supplies As your service partner, ABB guarantees you
More informationMotor and Generator Training
Motors and Generator Training Course Directory External course offering Motor and Generator Training ABB offers product training courses for motors and generators. These courses are mainly targeted to
More informationTwo-Stroke Diesel & X-DF Engines
Two-Stroke Diesel & X-DF Engines Training Courses CMA CGM A valuable investment WinGD training courses are conducted by professional, STCW-95 certified instructors to improve the technical and operational
More informationRESPONSE TO THE DEPARTMENT FOR TRANSPORT AND DRIVER AND VEHICLE STANDARDS AGENCY S CONSULTATION PAPER
RESPONSE TO THE DEPARTMENT FOR TRANSPORT AND DRIVER AND VEHICLE STANDARDS AGENCY S CONSULTATION PAPER MODERNISING COMPULSORY BASIC TRAINING COURSES FOR MOTORCYCLISTS 17 APRIL 2015 Introduction The Royal
More informationNational Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans
NZQF NQ Ref 0413 Version 6 Page 1 of 13 National Certificate in Motor Industry (Coachbuilding) with strands in Passenger Service Vehicles, Commercial Vehicles, and Motor Homes and Caravans Level 4 Credits
More informationPetroleum Refining-Production Planning, Scheduling and Yield Optimisation
Petroleum Refining-Production Planning, Scheduling and Yield Optimisation 03-14 December 2017 Dubai, United Arab Emirates wwqw Petroleum Refining-Production Planning, Scheduling and Yield Optimisation
More informationBosch: Skilled partner for workshop business
WAW 4155 EN 04.2009 The right to make changes of a technical nature and to alter the range on offer is reserved Bosch: Skilled partner for workshop business Developments from Bosch stand for innovative
More informationTraining Title GAS TURBINE AND COMPRESSOR OPERATION, MAINTENANCE AND TROUBLESHOOTING
Training Title GAS TURBINE AND COMPRESSOR OPERATION, MAINTENANCE AND TROUBLESHOOTING Training Duration 5 days Training Venue and Dates Gas Turbine and Compressor Operation, Maintenance and Troubleshooting
More informationBus and coach engineering technician standard: Employer Occupational Brief
Bus and coach engineering technician standard: Employer Occupational Brief July 2016 Competence expectations at gateways There are three gateway competency points in the bus and coach engineering technician
More informationMeeting papermaking challenges with service
PAP2p48-53AbbHi 8/3/10 4:26 pm Page 48 AUTOMATION Meeting papermaking challenges with service By Dan Overly, VP Pulp & Paper Service, ABB Inc. s technology evolves, pressures to lower business costs intensify,
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2019.
NZQF NQ Ref 1445 Version 2 Page 1 of 33 National Certificate in Motor Industry (Automotive Heavy Engineering) (Level 3) with strands in Agricultural Equipment, Materials Handling Equipment, Plant and Equipment,
More informationThis qualification has been reviewed. The last date to meet the requirements is 31 December 2020.
NZQF NQ Ref 1416 Version 3 Page 1 of 20 National Certificate in Motor Industry (Automotive Specialist Engineering) (Level 4) with strands in Automotive Heating, Ventilation, and Air Conditioning; Automotive
More informationSP06A Rail, Front Lower
Uniform Procedures For Collision Repair SP06A Rail, Front Lower 1. Description This procedure describes the repair and complete or partial replacement of an aluminum front lower rail. Inspection and evaluation
More informationDownload Automotive Electricity & Electronics Books
Download Automotive Electricity & Electronics Books Today's automotive technicians need a thorough understanding of electrical principles and electronic systems to service modern vehicles. With Automotive
More informationTraction Systems GC01DTR01_C 08/2013. Ingeteam Traction
Traction Systems GC01DTR01_C 08/2013 Ingeteam Traction traction@ingeteam.com Vehicle control unit (VCU) Human machine interface (HMI) Traction converter Auxiliary converter INGETEAM Traction designs and
More informationModel Contest Judging: Eliminating the Mystery. Sunrise Division 02 Rocky Mountain Region National Model Railroad Association
Model Contest Judging: Eliminating the Mystery Jim Laird / Gary Myers Sunrise Division 02 Rocky Mountain Region National Model Railroad Association Achievement Program & Contests The purpose of the Achievement
More informationHST -LS Interlocking device (Translation of Original Manual)
Installation and Operating Manual for Components HST -LS Interlocking device (Translation of Original Manual) HST-LS Ident.-No.: 10268 HST-LS Ident.-No.: 10269 HST-LS, pictured Ident-Nr. 10269 The image
More informationCUCAMONGA VALLEY WATER DISTRICT FLEET AND EQUIPMENT MECHANIC I/II
FLEET AND EQUIPMENT MECHANIC I/II Class specifications are intended to present a descriptive list of the range of duties performed by employees in the class. Specifications are not intended to reflect
More informationCampbell County Gillette, Wyoming
Campbell County Gillette, Wyoming Job Classification Title: FLSA Status: Non-Exempt Job Type: 1926 1940 Pay Range/Band: 52/23 56/25 Class specifications are intended to present a descriptive list of the
More informationCopyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0
Uniform Procedures For Collision Repair UPCR SP08A Rail, Rear 1. Description This procedure describes the repair and complete or partial replacement of an aluminum rear rail. Inspection and evaluation
More informationecognition of Prior Learning (RPL)
ecognition of Prior Learning (RPL) EVIDENCE GUIDE FOR INSPECT AND LUBRICATE AN AUTOMOTIVE SYSTEM Evidence Guide inspect and lubricate an automotive system Page 1 of 15 National Certificate in Professional
More informationSP01A Rail, Front Upper
Uniform Procedures For Collision Repair UPCR SP01A Rail, Front Upper 1. Description This procedure describes the repair and complete or partial replacement of an aluminum front upper rail. Inspection and
More informationAutomotive. Degree Automotive Technology, Associate of Science
BAKERSFIELD COLLEGE 2018/2019 CATALOG Automotive Degree Automotive Technology, Associate of Science Certificates Auto Engine Overhaul and Repair, Auto Tune-Up and Emission, Automotive Heating, Ventilation
More informationMechatronics & Industrial Automation Technician
Brief Program Description The Mechatronics & Industrial Automation Technician program is a 9 week program designed to help students develop the skills and knowledge needed for work as entry-level industrial
More informationABB Services for Low Voltage equipment Your choice, your future
ABB Services for Low Voltage equipment Your choice, your future You choose, we respond. Globally. The future of your equipment depends on the service you choose Whatever you choose, it should be a well-informed
More informationFleets & Techinical Services Ltd. company
Fleets & Techinical Services Ltd. company profile Choose Kida The Ultimate Auto Repair Solution that works for you About Us Kida A Fleets & Technical Services limited (aka Kida) is a modern and exceptional
More informationDeveloping PMs for Hydraulic System
Developing PMs for Hydraulic System Focus on failure prevention rather than troubleshooting. Here are some best practices you can use to upgrade your preventive maintenance procedures for hydraulic systems.
More informationSOURCE OF PRECISION.
SOURCE OF PRECISION. Minimal energy consumption, reduced scrap, lowest production costs during the entire life cycle the requirements for plastics processors are continuously rising. Due to increasingly
More informationTechnological Viability Evaluation. Results from the SWOT Analysis Diego Salzillo Arriaga, Siemens
Technological Viability Evaluation Results from the SWOT Analysis Diego Salzillo Arriaga, Siemens 26.04.2018 Agenda Study Objectives and Scope SWOT Analysis Methodology Cluster 4 Results Cross-Cluster
More informationStand 08/ MBCV Technical Training Prospectus Daimler Trucks and Buses Dealer Training Academy.
Stand 08/2015 1 MBCV Prospectus 2017 Daimler Trucks and Buses Dealer Training Academy. Welcome to the Mercedes-Benz NEW Prospectus! Dear Partners The DT&B Dealer Training Academy proudly presents you with
More informationRetrofitting unlocks potential
54 ABB REVIEW SERVICE AND RELIABILITY SERVICE AND RELIABILITY Retrofitting unlocks potential A modern approach to life cycle optimization for ABB s drives delivers immediate performance improvement and
More informationMISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE
MISSION VALLEY REGIONAL OCCUPATIONAL PROGRAM TRANSPORTATION SECTOR BASIC CAR CARE COURSE OUTLINE 1. Course Title: Basic Car Care 2. CBEDS Title: Automotive Mechanics 3. CBEDS Number: 5655 4. Job Titles/DOT
More informationPeriodic Training. Maintaining high driving standards and improving road safety
Periodic Training All enquiries please call FTT Training Head Office Telephone: 08454 303 388 www.fttonline.com Maintaining high driving standards and improving road safety All About Periodic Training
More informationTo Our Business Partners
CSR CSR > Social Performance > To Our Business Partners To Our Business Partners We build relationships of trust by engaging in open communication, with mutual prosperity as our goal. To Our Dealers Basic
More informationB. HOLMQVIST Nuclear Fuel Division, ABB Atom AB, Vasteras, Sweden
I Iflllll IPIBM1I IHtl!!!! Blini Vllll! «! all REDUCTION OF COST OF POOR QUALITY IN NUCLEAR FUEL MANUFACTURING XA0055764 B. HOLMQVIST Nuclear Fuel Division, ABB Atom AB, Vasteras, Sweden Abstract Within
More informationPowered Industrial Truck Safety Program
Powered Industrial Truck Safety Program 0 TABLE OF CONTENTS Forklift Safety Program 1.0 Overview.. 2 2.0 Purpose....2 3.0 Procedures..2 4.0 Responsibilities. 4 5.0 Training Requirements......5 Appendix
More informationTips & Technology For Bosch business partners
Tips & Technology For Bosch business partners Current topics for successful workshops No. 09/2010 Gasoline injection Invented for life Engine speed measurement in exhaust emission testing The complete
More informationFeatures of PSEC Educational Programs
Power Systems & Energy Course 2018 These intensive four-week programs are designed to strike the necessary balance between energy systems engineering theory and relevant, real-world applications. With
More informationEVENING PROGRAM DESCRIPTIONS. California State Smog Repair Technician
EVENING PROGRAM DESCRIPTIONS California State Smog Repair Technician School Name: Smog Tech Institute Course Name: Smog Repair Technician Course Number: TBA Program Title: Californian State Smog Repair
More informationSystems. Intelligent. Power & Control. Würth Elektronik ICS. Solutions and technologies for:
Würth Elektronik ICS Solutions and technologies for: Intelligent Power management Signal transmission Control Display and input Plug connections Power & Control Systems Würth Elektronik ICS The Würth Group
More information1 a) Not complying with the requirements of the Health and Safety at Work Act can have serious consequences.
Qualification title: Level 2 Technical Certificate in Automotive (4292-21) Exam title: Externally set, externally marked Version: Past Paper Base mark: 65 1 a) Not complying with the requirements of the
More informationAUTOMOTIVE TECHNOLOGY
Area: Technical Education Dean: Gabriel Meehan Phone: (916) 484-8354 Counseling: (916) 484-8572 www.arc.losrios.edu/autotech www.patc.biz Degree: A.S. - Automotive Analysis A.S. - Automotive Component
More informationHybrid and Electric Vehicles
Lucas Nülle is proudly and exclusively represented in Australia and New Zealand by Better Learning Outcomes Training Systems Australia A Division of Pullman Learning Group 300 Centre Road, Bentleigh, Victoria,
More informationHunter Alignment. This alignment education series also helps prepare technicians for the ASE A4 Certification.
Hunter Alignment Hunter offers entry and intermediate level alignment courses throughout the county. The combination of discussion and hands-on lab/shop activities melds theory with reality. This alignment
More informationGeneral elearning Course Catalog
General elearning Komatsu Mining Corp. http://mining.komatsu Product designs, specifications and/or data in this document are provided for informational purposes only and are not warranties of any kind.
More informationMECHANICS COURSE SUMMARIES
MECHANICS COURSE SUMMARIES INTRODUCTORY MEC1010: MODES & MECHANISMS Students research, design, build and test a model of a transportation vehicle, using a simple power source, common materials and tools.
More informationThe District Heating Barometer, why and how
The District Heating Barometer, why and how European DHC statistics Towards better documentation and analysis, 30 March 2011, Brussels Stephan Orita Legal and European Affairs AGFW, Frankfurt a. Main AGFW
More informationAppendix C: Model Contest Judging Guidelines
Appendix C: Model Contest Judging Guidelines The Model Contest Judging Guidelines are presented here for Guidance of the Contest Committee, Model Contest judges, and Model (and Portable Layout) Contest
More informationBasic voltmeter use. Resources and methods for learning about these subjects (list a few here, in preparation for your research):
Basic voltmeter use This worksheet and all related files are licensed under the Creative Commons Attribution License, version 1.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/1.0/,
More informationAdvanced RiderCourse SportBike Techniques Frequently Asked Questions. 1. What is the MSF Advanced RiderCourse SportBike Techniques (ARC-ST) course?
Advanced RiderCourse SportBike Techniques Frequently Asked Questions 1. What is the MSF Advanced RiderCourse SportBike Techniques (ARC-ST) course? The ARC-ST is the public version of the Military SportBike
More informationClosed Size: 194x197mm Open Size: 388x197mm SOLAR DECATHLON MIDDLE EAST DUBAI The Solar Decathlon Middle East s Organising Partners
Closed Size: 194x197mm Open Size: 388x197mm SOLAR DECATHLON MIDDLE EAST DUBAI 2018 The Solar Decathlon Middle East s Organising Partners SOLAR DECATHLON MIDDLE EAST www.solardecathlonme.com 1 What is the
More informationHIGH-VOLTAGE BATTERIES DIAGNOSTICS & MAINTENANCE TRAINER
Lucas Nülle is proudly and exclusively represented in Australia and New Zealand by Training Systems Australia First in Vocational Training Equipment A Division of Pullman Learning Group 300 Centre Road,
More informationCHEMICALS AND REFINING. ABB in chemicals and refining A proven approach for transforming your challenges into opportunities
CHEMICALS AND REFINING ABB in chemicals and refining A proven approach for transforming your challenges into opportunities 2 ABB in Chemicals and Refining A proven approach for transforming your challenges
More informationCITY OF MINNEAPOLIS GREEN FLEET POLICY
CITY OF MINNEAPOLIS GREEN FLEET POLICY TABLE OF CONTENTS I. Introduction Purpose & Objectives Oversight: The Green Fleet Team II. Establishing a Baseline for Inventory III. Implementation Strategies Optimize
More informationDay 5 Practical and Written Final SAE Exams for SAE Int l Advanced HEV Diagnostics CoC
One of the fastest growing automotive sectors is the field of vehicles using electric propulsion systems. These technologies are providing significant opportunities and challenges to automotive instructors
More informationService and Rehabilitation Electrical Power Systems
Service and Rehabilitation Electrical Power Systems From water to wire 3 ANDRITZ HYDRO Electrical Power System Modernization and rehabilitation International technology group ANDRITZ is a globally leading
More informationANSI/AGRSS Automotive Glass Replacement Safety Standard
ANSI/AGRSS 003-2009 Automotive Glass Replacement Safety Standard 1. Scope and purpose 1.1 Scope To develop and publish nationally-recognized automotive glass replacement safety standards addressing procedures,
More information