MIG SM-70 SG2 Kleine spoel D200 dia 0,6mm - 5kg MIG SM-70 SG2 Kleine spoel D200 dia 0,8mm - 5kg MIG SM-70 SG2 Kleine spoel D200 dia 1,0mm -

Size: px
Start display at page:

Download "MIG SM-70 SG2 Kleine spoel D200 dia 0,6mm - 5kg MIG SM-70 SG2 Kleine spoel D200 dia 0,8mm - 5kg MIG SM-70 SG2 Kleine spoel D200 dia 1,0mm -"

Transcription

1 MIG SM-70 SG2 Kleine spoel D200 dia 0,6mm - 5kg MIG SM-70 SG2 Kleine spoel D200 dia 0,8mm - 5kg MIG SM-70 SG2 Kleine spoel D200 dia 1,0mm - 5kg MIG SM-70 eco SG2 ijzer dia 0,8mm MIG SM-70 eco SG2 ijzer dia 1,0mm MIG SM-70 eco SG2 ijzer dia 1,2mm MIG SM-70 eco SG2 plastiek dia 0,8mm MIG SM-70 eco SG2 plastiek dia 1,0mm MIG SM-70 eco SG2 plastiek dia 1,2mm MIG SM-70 SG2 ijzer dia 1,0mm MIG SM-70 SG2 ijzer dia 1,2mm MIG SM-70 SG2 ijzer dia 1,4mm MIG SM-70 SG2 ijzer dia 1,6mm MIG SM-70 SG2 plastiek dia 0,8mm MIG SM-70 SG2 plastiek dia 1,0mm MIG SM-70 SG2 plastiek dia 1,2mm MIG SM-70 SG2 plastiek dia 1,6mm MIG SM-70 SG2 dia 0,8mm - 250kg Ball pack MIG SM-70 SG2 dia 1,0mm - 250kg Ball pack MIG SM-70 SG2 dia 1,2mm - 250kg Ball pack MIG SM-70 SG2 Blank dia 1,0mm MIG SM-70 SG2 dia 1,0mm - 300kg Ball pack MIG SM-70 SG2 dia 1,6mm - 500kg Ball pack

2 SM-70 AWS A5.18 / ASME SFA5.18 ER70S-6 JIS Z3312 YGW12 EN ISO A G 42 2 C 3Si1 EN ISO A G 42 3 M 3Si1 Butt Voor and het lassen fillet welding van staalstructuren, of steel structures zoals such voertuigen, as vehicles, machines machinery en bruggen. and bridges. SM-70 is a solid wire designed for all position welding by short-circuiting type transfer. As the deposition efficiency is high and penetration is deep, highly efficient welding can be performed. 1 Use with CO₂/Argon+15~25% CO₂gas. 2 The Flow of quantity of shielding gas should be approximately 25l/min. 3 Use wind screen against wind. 4 Keep distance between tip and base metal 6~15mm for less than 250A, and 15~25mm for more than 250A of welding current. GMAW Welding Position Current Shielding Gas DC + CO₂/Ar+ CO₂ 1G 2F 3G 4G (PA) (PB)(PF.PG) (PE) Typical Chemical Composition of Wire (%) C Si Mn P S YS TS EL Temp. CVN-Impact Value MPa(lbs/in 2 ) MPa(lbs/in 2 ) (%) ( ) J (ft lbs) 430 (62,400) 540 (78,400) (-20) 70 (52) I Packing (Including Ball Pac) KR, ABS, LR, BV, DNV, GL, Dia. (mm) Spool(kg) NK, CWB, TÜV, NAKS, MRS, CE, DB Ball Pac Size mm F & HF 50~ ~ ~390 V-up,OH 50~140 50~140 -

3 MIG SM-70EN SG3 dia 0,8mm - 250kg Ball Pack MIG SM-70EN SG3 dia 1,0mm - 250kg Ball Pack MIG SM-70EN SG3 dia 1,2mm - 250kg Ball Pack MIG SM-70EN SG3 dia 1,0mm - 300kg Ball Pack MIG SM-70EN SG3 dia 1,2mm - 300kg Ball Pack MIG SM-70EN eco SG3 ijzer dia 0,8mm MIG SM-70EN eco SG3 ijzer dia 1,0mm MIG SM-70EN eco SG3 ijzer dia 1,2mm MIG SM-70EN eco SG3 plastiek dia 0,8mm MIG SM-70EN eco SG3 plastiek dia 1,0mm MIG SM-70EN eco SG3 plastiek dia 1,2mm MIG SM-70EN SG3 ijzer dia 1,0mm MIG SM-70EN SG3 ijzer dia 1,2mm MIG SM-70EN SG3 plastiek dia 1,0mm MIG SM-70EN SG3 plastiek dia 1,2mm

4 SM-70EN AWS A5.18 / ASME SFA5.18 ER70S-6 JIS Z3312 YGW12 EN ISO A G 42 2 C 4Si1 EN ISO A G 46 4 M 4Si1 Voor Butt and het lassen fillet welding van staalstructuren, of steel structures zoals such voertuigen, as vehicles, machines machinery en bruggen. and bridges. Lasdraad heeft hogere rekgrens en treksterkte dan de SM-70. Spatarmer lassen. SM-70EN is a solid wire designed for used Ar+CO₂mixed gas. Its property is similar to SM-70 and better than bead appearence, lower spatter for SM Use with CO₂/Argon+15~25% CO₂gas. 2 The Flow of quantity of shielding gas should be approximately 25l/min. 3 Use wind screen against wind. 4 Keep distance between tip and base metal 6~15mm for less than 250A, and 15~25mm for more than 250A of welding current. Welding Position Current Shielding Gas DC + CO₂/Ar+ CO₂ 1G 2F 3G 4G (PA) (PB)(PF.PG)(PE) Typical Chemical Composition of Wire (%) C Si Mn P S YS TS EL Temp. CVN-Impact Value MPa(lbs/in 2 ) MPa(lbs/in 2 ) (%) ( ) J (ft lbs) 461 (66,900) 560 (81,200) (-20) 95 (55) I Packing (Including Ball Pac) TÜV, DB, CE, DNV, GL Dia. (mm) Spool(kg) (in) /16 (lbs) Ball Pac Size mm(in) 0.9 (.035) 1.2 (.045) 1.6 (1/16) F & HF 50~ ~ ~390 V-up,OH 50~140 50~140 -

5 SM-110 MIG Hyundai T1 SM 110 1,0mm MIG Hyundai T1 SM 110 1,2mm AWS A5.28 ER110S-G Voor SM-110 snijgereedschappen, is a 0.3Cr-1.9Ni-0.5Mo-alloyed, messen voor bare, landbouwwerktuigen, solid wire for the GMAW rollen of high voor strength koudwalsen steels with low-temperature impact toughness requirements. Characteristic features include excellent start properties, trouble-free feeding at high wire speeds and lengthy feed distances, a very stable arc at high welding currents; extremely low levels of spatter, low fume emission, reduced contact tip wear and improved protection against corrosion of the wire. 1 Use with 100%Ar or Ar+2~20%CO₂gas. 2 Flow quantity of shielding gas should be 25l/min. approximately. 3 Use the wind-screen against wind. Shielding Gas Ar + CO₂(M21) Current Pulse Typical Chemical Composition of Wire (%) C Si Mn P S Cr Ni Mo YS TS EL Temp. CVN-Impact Value MPa(lbs/in 2 ) MPa(lbs/in 2 ) (%) ( ) J (ft lbs) 700 (103,000) 887 (128,700) (-40) 82 (60) -60 (-76) 69 (51) I Packing (Including Ball Pac) Dia. (mm) Spool(kg) (in) (lbs) Size mm (in) 1.2 (.045) F & HF 170 ~ 270

6 MIG Hyundai SC 600 HM 1,2mm MIG Hyundai SC 600 HM 1,6mm SC-600HM Voor For cutting snijgereedschappen, tools, shear blades, rollers messen for cold voor rolling landbouwwerktuigen, mills. rollen voor koudwalsen SC-600HM is a metal cored wire without slag for hardfacing application with Ar-CO₂mixed gas. It is high resistance to cracking and toughness. 1 Preheat at 150 (302 ) and more than that in general. 2 Use with Ar + 20% CO₂shielding gas. Welding Position Current Shielding Gas DC + Ar + 20%CO₂ 1G (PA) Typical Chemical Composition of All-Weld Metal (%) C Si Mn Cr Mo FCAW Preheat temp. ( ) Postheat Heat Treatment Hardness(HRc) 150 (302) ~62 I Packing Dia. (mm) Spool(kg) 15 (in).045 1/16 (lbs) 33 Size mm (in) 1.2(.045) 1.6(1/16) F 250~ ~380

Miller PipePro Auto XCS

Miller PipePro Auto XCS Pg. 1/7 Pg. 2/7 Digital Automatic Welding System specific to weld the root pass with or without backing support in the pipeline. Note: the system needs to be fed with an electric generator having a minimum

More information

PipeWorx Welding System

PipeWorx Welding System PipeWorx Welding System Issued Aug. 009 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe The Power

More information

Improves Safety, Productivity & Profitability.

Improves Safety, Productivity & Profitability. Improves Safety, Productivity & Profitability. TM GAME-CHANGING TECHNOLOGIES CAN STOP YOU FROM WASTING HOURS EVERY DAY. ArcReach welding technology minimises the non-valueadded time spent walking to and

More information

Quality, Safety and Environment

Quality, Safety and Environment Quality, Safety and Environment Global Valve Center B.V. is an independent, internationally operating, modern, flexible and service-oriented organization with over forty years of experience and expertise

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS Multi-WeldTM 350 MULTI-OPERATOR Connect Several DC+ Welders to One Power Supply. The is a 350 amp, DC+, 100% duty cycle welder capable of CV-wire, CC-stick or arc gouging. With its high efficiency, the

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Apr. 00 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe Fabrication

More information

Company in Brief. With our flexible manufacturing and sales teams, we believe we have the know-how to do so.

Company in Brief. With our flexible manufacturing and sales teams, we believe we have the know-how to do so. Hyundai Welding Co Company in Brief Corporate History Quality Assurance Product Range and Capacity Why Hyundai? Global Clientele Global Network The works Company in Brief The Hyundai Welding Company is

More information

GMAW FCAW. Fabricator 190 comes with:

GMAW FCAW. Fabricator 190 comes with: Fabricator 90 90 C DC 230 Power, Performance, Features... and Reliability 5Year * Fabricator 90 comes with: Power cord and plug 0ft (3m), Tweco WeldSkill MIG gun 0ft (3m) work cable and clamp Gas regulator/flowmeter

More information

Flow volume: l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer

Flow volume: l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer Std Line ACE3 Screwpump Series Product description Flow volume: 15-180 l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer The Std Line (standard) ACE pumps come

More information

STT II Power Wave C300 Power Wave S350. Power Wave 455M/(STT) KEY: Excellent Good Optional. Computer screen showing waveform arc characteristic.

STT II Power Wave C300 Power Wave S350. Power Wave 455M/(STT) KEY: Excellent Good Optional. Computer screen showing waveform arc characteristic. A Wide Variety of Welding Waveforms for Every Application Fast, Reliable Digital Communication Expand or Update With Lincoln s Latest Welding Multi-Process Welding On A Variety Of Materials Waveform Control

More information

Inverter Welding System

Inverter Welding System POWER WAVE 455/STT AND POWER FEED 10 DUAL Inverter Welding System NEW! POWER WAVE 455/STT AND POWER FEED 10 DUAL ADVANTAGE LINCOLN HIGHEST PERFORMANCE SYSTEM Superior STT, pulsed GMAW and FCAW welding

More information

ACD6. Std Line. Product Description. Max differential pressure: 7 bar Circulation, lubrication and transfer ACD GB

ACD6. Std Line. Product Description. Max differential pressure: 7 bar Circulation, lubrication and transfer ACD GB ACD6 Std Line Product Description Flow volume: 10-42 l/min Max differential pressure: 7 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The ACD pumps come in two

More information

PipeWorx Welding System

PipeWorx Welding System PipeWorx Welding System Issued Jan. 011 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Fabrication Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes

More information

PipePro Welding System

PipePro Welding System PipePro Welding System Root-Fill-Cap Welding Issued Feb. 008 Index No. PWS/.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Applications Process Piping Offshore Piping Onshore Piping Pipe

More information

Copper & Copper Nickel. Pipes Fittings Flanges.

Copper & Copper Nickel. Pipes Fittings Flanges. Copper & Copper Nickel Pipes Fittings Flanges BOMYUNG METAL.Co.,Ltd CONTENTS 01 COPPER PIPES COPPER PIPES CHEMICAL COMPOSITION / MECHANICAL PROPERTIES / WELDING INSTRUCTION / PIPE / COIL COPPER FITTINGS

More information

V350-PRO. (1) Advanced Process Panel only. TECHNICAL SPECIFICATIONS

V350-PRO. (1) Advanced Process Panel only. TECHNICAL SPECIFICATIONS ENGINE MULTI-PROCESS DRIVEN WELDERS Invertec Designed Smart. Built Tough. V350-PRO The is a versatile, multi-purpose, multi-process power source that s lightweight and portable. Available in Construction,

More information

Strongweld. Ultimate Welding Performance

Strongweld. Ultimate Welding Performance Dear Customers: California, August 13, 2014 We are experiencing some changes at INDURA USA which will have some minor effects in the way we conduct business with you. INDURA became part of Air Products

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS AUTOMATED SOLUTIONS Tandem MIG Process Increased Production Tandem MIG is a dual wire, high productivity GMAW process designed for flexible robotic or fixed hard automation welding applications. The process

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) Millermatic 255 Issued Oct. 2018 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops

More information

MATERIAL TEST REPORT/ Q.C. DOCUMENTATION MADE IN CANADA

MATERIAL TEST REPORT/ Q.C. DOCUMENTATION MADE IN CANADA PRODUCT DESCRIPTION: PUP JOINT 3" 1502 X 3FT NACE NK-030511 DATE: MAY 19 2011 C: 0.320 Mn: 0.540 Si: 0.270 Cr: 1.030 Ni: 0.100 Mo: 0.170 Cu: 0.190 P: 0.007 S: 0.002 Sn: V: Al: 0.029 Yield: 84,000 PSI HB

More information

djangoproject.com skillsapp.com for invite)

djangoproject.com skillsapp.com for invite) DATA DESIGN MEANING djangoproject.com skillsapp.com (tweet @skillsapp for invite) VISUALIZATION SRSLY, GUISE DATA? PROFIT MEANING! acquire parse filter mine represent refine interact acquire parse filter

More information

MODULAR DRIVE SYSTEM AND SPINARC TECHNOLOGY A Winning Combination!

MODULAR DRIVE SYSTEM AND SPINARC TECHNOLOGY A Winning Combination! MODULAR DRIVE SYSTEM AND SPINARC TECHNOLOGY A Winning Combination! Two well known technologies come together to provide the highest level of productivity and quality welds with little or no bevel required,

More information

Wide Flange Beams for offshore structures

Wide Flange Beams for offshore structures Wide Flange Beams for offshore structures S355 G11/G12 +M and Hi355 TZK Weldability evaluation in accordance with EN 10225 June 2012 Content Base metal characterization (Appendix 1 : certificate) Identification

More information

8-Blade DPA Cutting Unit with 5 Inch Reel Reelmaster 5210/5410 Series Traction Unit

8-Blade DPA Cutting Unit with 5 Inch Reel Reelmaster 5210/5410 Series Traction Unit Form No. 3354-705 Rev B 8-Blade DPA Cutting Unit with 5 Inch Reel Reelmaster 5210/5410 Series Traction Unit Model No. 03661 Serial No. 260000001 and Up Register at www.toro.com. Original Instructions (EN)

More information

Delivery program. Carbon steel and stainless steel tubes in a wide range of qualities and dimensions. Distribution

Delivery program. Carbon steel and stainless steel tubes in a wide range of qualities and dimensions. Distribution Delivery program Carbon steel and stainless steel tubes in a wide range of qualities and dimensions Distribution Our value proposition The reliable supply of high-quality steel tubes and customized service

More information

MIG Welding Equipment Operations Reference Guide

MIG Welding Equipment Operations Reference Guide MIG Welding Equipment Operations Reference Guide Fronius USA Office: 1-877-376-6487 www.fronius-usa.com General Information Table of Contents Conversion Charts page 1 3d-Drawing page 2 Weld System Component

More information

FILTERS, REGULATORS & LUBRICATORS

FILTERS, REGULATORS & LUBRICATORS FILTERS, REGULATORS & LUBRICATORS Infinity filters remove solid particles and condensate produced by the compressor. The range includes standard filters, regulators and lubricators for points of use. OFR

More information

Scope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products.

Scope supplies stainless steel, aluminum, steel, and alloy steel, brass, copper, bronze, titanium, nickel alloys, and engineered plastics products. STAINLESS STEEL Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers. With an extensive inventory

More information

IBEX 1141 FLOOR/FIREWALL PANEL INSTRUCTIONS GOAT BUILT IBEX FLOOR/FIREWALL PANELS

IBEX 1141 FLOOR/FIREWALL PANEL INSTRUCTIONS GOAT BUILT IBEX FLOOR/FIREWALL PANELS GOAT BUILT IBEX FLOOR/FIREWALL PANELS Thank you for purchasing Ibex chassis kit components, before starting your build, we recommend that you read through these instructions to familiarize yourself with

More information

PLANT KOREA. Contents

PLANT KOREA. Contents Contents 1. Company outline 3. Handling Items 1. Company outline is Trading company & Network between Korean company and Customer. Business Scope: plant equipment / materials business in Korea such as

More information

SHEILDED METAL ARC WELDING (SMAW) AT/AE MECHANICAL CONTEST

SHEILDED METAL ARC WELDING (SMAW) AT/AE MECHANICAL CONTEST SHEILDED METAL ARC WELDING (SMAW) AT/AE MECHANICAL CONTEST 1. Position two 3 x 6 x ¼ steel plates in the flat position for a butt weld. The weld joint should be 6 long. 2. Select to either bevel the metal

More information

Issued Feb Index No. M/ Series

Issued Feb Index No. M/ Series Issued Feb. 017 Index No. M/.0 70 Series Constant-Speed Wire Feeder Quick Specs Heavy Industrial Applications Heavy manufacturing Metal fabrication Construction Light manufacturing Processes MIG (GMAW)

More information

LN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC

LN-8. Semiautomatic Wire Feeder LINCOLN ELECTRIC LN-8 Semiautomatic Wire Feeder LN-8 WIRE FEEDER LN-8 shown with DC-600 power source, K1524-1 universal wire reel stand, K1557-1 swivel platform and a Magnum 400 gun and cable assembly. The LN-8 is a semiautomatic

More information

Eco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors

Eco Mixed Flow (emf) Energy Saver. Terminal Box. Performance. Quality Assurance. Impellers. Accessories. Motors Eco Mixed Flow (emf) High efficiency Mixed Flow Fan with guide vanes Available in sizes 355 to 710mm dia. IP54 Fan rating (duct mounted) Operating temperatures up to 80 C (see technical specification)

More information

Welder is warranted for three years, parts and labor. Gun warranted for 90 days, parts and labor.

Welder is warranted for three years, parts and labor. Gun warranted for 90 days, parts and labor. Millermatic 211 Issued Aug. 2016 Index No. DC/12.58 MIG Power Source, Wire Feeder and Gun Package Quick Specs Light Industrial Applications Light fabrication Maintenance and repair Auto body Farm/home

More information

Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23

Forged steel socket Welding fittings 6 ~ 13. Forged steel threaded fittings 14 ~ 20. Forged steel outlet fittings 21 ~ 23 Forged steel socket Welding fittings 6 ~ 13 Forged steel threaded fittings 14 ~ 20 Forged steel outlet fittings 21 ~ 23 Standard threads specifications 24 ~ 25 Comparison of astm specifications and similar

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW) Millermatic 255 Issued January 2019 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops

More information

Full Traceability. Material Specification. Raw Material Code. Heat Treatment

Full Traceability. Material Specification. Raw Material Code. Heat Treatment All J.B. Smith swages, bull plugs, tubing and casing nipples, and chambers are traceable to the original mill test report. To ensure traceability, all fittings are steel stamped as follows: Material Specification

More information

Broetje-Automation Company Standard Structural component specification for welded parts

Broetje-Automation Company Standard Structural component specification for welded parts Broetje-Automation Company Standard Table of Contents Application Area and Purpose 3 1 Structural components pursuant to DIN 1090 4 1.1 Structural component classification 4 1.1.1 Steel components < Strength

More information

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

INSPECTION CERTIFICATE

INSPECTION CERTIFICATE INSPECTION CERTIFICATE CUSTOMER :STATOILHYDRO ASA ORDER NO. :T.13002/4501498076 ITEM NO. 3 SHIPPER :SUMITOMO CORPORATION 057 KEN 4018/7 8P13S017601 COMMODITY :SEAMLESS STEEL CASING WITH VAM TOP STANDARD

More information

JIS G4051 Carbon steel for Machine Structural Use

JIS G4051 Carbon steel for Machine Structural Use JIS G4051 Carbon steel for Machine Structural Use 1. Scope This Japanese Industrial Standard specifies the carbon steels for machine structural use manufactured by hot forming, such as hot rolling or hot

More information

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One!

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One! Millermatic 212 Auto-Set Issued Oct. 2008 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power

More information

LN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS

LN-9 AND LN-9 GMA. Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA Semiautomatic Wire Feeders THE WELDING EXPERTS LN-9 AND LN-9 GMA LN-9 GMA shown with CV-655 power source, K1524-1 universal wire reel stand, K1504-1 50/60 lb. coil adapter, K163 undercarriage

More information

PipeWorxFieldPro System

PipeWorxFieldPro System PipeWorxFieldPro System Issued June 2013 Index No. PWS/6.0 Multiprocess Pipe Welding Systems Quick Specs Pipe Welding Field Operations Process Piping Refinery Petrochemical Power HVAC and Water Pipe Processes

More information

Series 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours

Series 812. TÜV/CE atmospheric discharge safety valves for industrial applications. Air, gases and vapours TÜV/CE atmospheric discharge safety valves for industrial applications Series 812 4.4 812 Safety valves made of brass, atmospheric discharge, with threaded connections SUITABLE FOR Air, gases and vapours

More information

212 Millermatic MIG Arc Welding Power Source,

212 Millermatic MIG Arc Welding Power Source, Issued Jan. 2013 Index No. DC/12.46 212 Millermatic MIG Arc Welding Power Source, Auto-Set Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home

More information

Welding & Cutting solutions from ESAB

Welding & Cutting solutions from ESAB Welding & Cutting solutions from ESAB Arc Equipment Plasma Equipment Gas Apparatus Personal Protection Mechanized Cutting Welding Automation 2014 A full line of arc and plasma equipment, gas apparatus,

More information

MIG Welders. Operator s Manual Model 135WFG Wire Feed Welder

MIG Welders. Operator s Manual Model 135WFG Wire Feed Welder Operator s Manual Model 135WFG Wire Feed Welder MIG Welders WARNING: Do not assemble, install, or operate this equipment without reading ALL of this manual and the safety precautions and warnings illustrated

More information

Peeled and Ground Round Steel Bars

Peeled and Ground Round Steel Bars pag. 1 of 9 Viale Certosa, 249-20151 Milano Tel: +39 02 30 700 - Fax: +39 02 38000 346 - Mail: commerciale.riva@rivagroup.com Production Units: Malegno (BS), Italy pag. 2 of 9 Products STRUCTURAL AND GENERAL

More information

The Amodil Group. Specialists In Stainless Steel Long Products

The Amodil Group. Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Specialists In Stainless Steel Long Products Round Hexagon Flat Square Angle Billet Seamless Pipe & Tube Hollow Bar Fittings Over 5,000 tonnes of Stainless

More information

Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2

Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES SIZES. MarelliMotori ASI.CT.033.2 Marine Motors Three Phase Squirrel Cage Induction Motors MA - A4 - BB - B4 - B5 SERIES 63-400 SIZES MarelliMotori ASI.CT.033.2 CONTENTS Page STANDARDS 5 ESSENTIAL AND NON-ESSENTIAL SERVICE 5 CLASSIFICATION

More information

WELDING THE FUTURE - TODAY!

WELDING THE FUTURE - TODAY! TODAY! THE Technical Data MAX 403 MAX 403S multiprocess inverter, stick, tig lift, mig, pulse mig Main Voltage Phase Frequency Real Current (35%) Real Power (35%) Power Factor No Load Voltage Current Range

More information

ACG7. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACG GB

ACG7. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACG GB ACG7 Std Line Product Description Flow volume: 80-1200 l/min Max differential pressure: 16 bar Applications: Circulation, lubrication and transfer 1. Applications 1.1 Functionality The Std Line (standard)

More information

VIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018

VIPER Multi-Function Inverter Welder-MIG-MMA Amps #KUMJRVM150 Ex GST Inc GST. $ $ $ $ Special Ends 31/12/2018 VIPER 150 - Multi-Function Inverter Welder-MIG-MMA 30-150 Amps #KUMJRVM150 Ex GST Inc GST $430.00 $473.00 $400.00 $440.00 Special Ends 31/12/2018 ORDER CODE: W245 MODEL: VIPER 150 Type: MIG / MMA & Multifunction

More information

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz

Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power

More information

Section 3 - SETTING UP FOR WELDING

Section 3 - SETTING UP FOR WELDING Section - SETTING UP FOR WELDING The following items are required: 1) A reel of wire of suitable size and type ) A suitable gun and cable assembly with a Euro connector and the correct tip and, if necessary

More information

Controllers and Power Sources. Welding Tractors

Controllers and Power Sources. Welding Tractors Controllers and Power Sources Welding Tractors 23 Railtrac 1000 Multi-purpose system for welding and cutting Ideal for a wide variety automated gas metal arc welding (GMAW) applications. Made from aluminium

More information

KTM. Enhanced, proven design offers both control and block valve functions

KTM. Enhanced, proven design offers both control and block valve functions KTM Enhanced, proven design offers both control and block valve functions Features Unique dual-v ball features a secondary (Small) V-notch allowing extremely small, accurate flow rates The primary (Large)

More information

Flow volume: l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer

Flow volume: l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer Opti Line ACG8 Screw pump Product description Flow volume: 80 1200 l/min Max differential pressure: 16 bar Applications: Lubrication, circulation and transfer The ACG pumps are used for a number of different

More information

Delivery program for steel pipes

Delivery program for steel pipes Delivery program for steel pipes Table of content Photo: Herrenknecht AG 1. Water-bearing steel tubes 4 EN 10255 EN 10224 2. Seamless steel tubes for pressure purposes 6 EN 10216-1 bzw. EN 10216-3 EN 10216-2

More information

Swivelling Mechanism Design and Manufacturing

Swivelling Mechanism Design and Manufacturing Swivelling Mechanism Design and Manufacturing 1.Dr.A.Pandhare, 2.Aakash Dorwat, 3.Atul Shirode, (2,3) B.E. Students (1) HOD Mechanical Department, SKNCOE, Atul Shirode- email- atulshirode21@gmail.com/

More information

350/500 Tuffline TM Entrances 1

350/500 Tuffline TM Entrances 1 JANUARY, 2017 350/500 Tuffline TM Entrances 1 FEATURES Features 350 Tuffline TM has 3-1/2" (88.9) vertical stile, 3-3/8" (85.8) top and 6-3/4" (171.5) bottom rail 500 Tuffline TM has 5" (127) vertical

More information

Alfa Laval three-screw pump

Alfa Laval three-screw pump Alfa Laval three-screw pump Alfa Laval 3S pumps The 3S series is characterised by an innovative design for long service life, even in harsh operating conditions. The thoroughly engineered 3S series is

More information

EXPORTERS OF ENG MATERIALS & FABRICATIONS

EXPORTERS OF ENG MATERIALS & FABRICATIONS EXPORTERS OF ENG MATERIALS & FABRICATIONS Certificate of Registration This is to certify that the Quality Management System of UK Steel Exports Limited Blackvein Industrial Estate, Cross Keys, Newport,

More information

Metal Panel Bonding Adhesive 1

Metal Panel Bonding Adhesive 1 SERVICE INSTRUCTIONS HC3B-96278A98-A* Panel Body Side Outer 6.75' (RH) - No Holes 1 W707638-S900C Blind Rivet 52 HC3B-96278A99-A* Panel Body Side Outer 6.75' (LH) - No Holes 1 W707638-S900C Blind Rivet

More information

X-BT-ER stainless steel threaded studs for electrical connections

X-BT-ER stainless steel threaded studs for electrical connections stainless steel threaded studs for electrical connections Product data X-BT-ER Dimensions 1 2 3 1 7 2 M8 Ø 4. [0.177"] 1 M10/ W10 3 Ø 12 [0.472"] 24 [0.94"] 4 4 31.3 [1.232"] [0.18"] 7 M6/ W6 3 Ø 4. [0.177"]

More information

TECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1.

TECHNOLOGY FOR THE WELDER S WORLD. PLASMA. Product Catalogue 2.2 / V1. TECHNOLOGY FOR THE WELDER S WORLD. PLASMA Product Catalogue 2.2 / V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS CUT 70 / ABIPLAS

More information

Tri-Clamp ferrules & blanks

Tri-Clamp ferrules & blanks Tri-Clamp ferrules & blanks Generally, Tri-Clamp ferrules, blanks and adapters are produced by CNC turning from stainless steel bar, in AISI 316L 1.4404 material. The material conforms typically to ASTM

More information

MANUFACTURING SPECIFICATION

MANUFACTURING SPECIFICATION Swage Nipples, Bull Plugs & Oil Country Fittings Catalogue SWAGE NIPPLES, BULL PLUGS, OIL COUNTRY FITTINGS, COUPLINGS, LOW TEMP & STAINLESS SWAGES MANUFACTURING SPECIFICATION CSP Products Ltd, manufactures

More information

GMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output.

GMAW FCAW AMP. Higher Output. The Fabricator 140 punches out 140 amp maximum output. Fabricator 40 40 C DC 20 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repairs Sheet Metal Fabrication

More information

350/500 Heavy Wall TM Entrances 1

350/500 Heavy Wall TM Entrances 1 350/500 Heavy Wall TM Entrances 1 FEATURES Features 350 medium stile has 3-1/2" (88.9) vertical stile, 3-1/2" (88.9) top and 6-1/2" (165.1) bottom rail 500 wide stile has 5" (127) vertical stile, 5" (127)

More information

LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information

LSN Atmospheres containing explosive GAS totally enclosed three-phase asynchronous motors General information General information Non-sparking totally enclosed threephase asynchronous motors, LSN series, according to IEC 60034, 60072, IEC 60079-1 and 60079-15. Single speed: power 0.75 to 90 kw 1, frame size 80

More information

GMAW FCAW. 5Year * Fabricator 281 comes with:

GMAW FCAW. 5Year * Fabricator 281 comes with: Fabricator 28 C DC 208 Power, Performance, Features... and Reliability 5Year * Quick Specifications Processes MIG () Flux Cored () Industrial Applications Maintenance and Repair Garage/Body Shops Fabrication/Construction

More information

8-Blade DPA Cutting Unit with 5in Reel Reelmaster 5210/5410 Series Traction Unit

8-Blade DPA Cutting Unit with 5in Reel Reelmaster 5210/5410 Series Traction Unit Form No. 3376-949 Rev B 8-Blade DPA Cutting Unit with 5in Reel Reelmaster 5210/5410 Series Traction Unit Model No. 03694 Serial No. 313000001 and Up Register at www.toro.com. Original Instructions (EN)

More information

Delivery program. Carbon steel and stainless steel tubes as well as piston products

Delivery program. Carbon steel and stainless steel tubes as well as piston products Delivery program Carbon steel and stainless steel tubes as well as piston products About us BENTELER Distribution is one of the leading international operating stockholding and processing companies of

More information

X8 MIG Welder THE FUTURE OF WELDING IS HERE

X8 MIG Welder THE FUTURE OF WELDING IS HERE X8 MIG Welder THE FUTURE OF WELDING IS HERE "The X8 MIG Welder is a first-class equipment for demanding, high-quality aluminum welding from the point of view of both arc performance and usability." Kimmo

More information

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963 800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Sizes ½"-36" Pressures Class Figure 150

More information

D4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications

D4B-N. uce. Safety Limit Switch. Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications Safety Limit Switch Positive Action Limit Switches with Direct Drive Contacts for Critical Switching Applications H Snap-action contact for accurate switching with safe operation via direct drive positive

More information

PLASMA. Product Catalogue 2.0/V1.

PLASMA. Product Catalogue 2.0/V1. T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. PLASMA Product Catalogue 2.0/V1 www.binzel-abicor.com Content Plasma Cutting Torches Plasma Cutting Torches ABIPLAS CUT air cooled Page 04 05 ABIPLAS

More information

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Stick (SMAW) Flux Cored (FCAW) Air Carbon Arc (CAC-A) Cutting and Gouging. Invision 354MP

Processes MIG (GMAW) Pulsed MIG (GMAW-P) Stick (SMAW) Flux Cored (FCAW) Air Carbon Arc (CAC-A) Cutting and Gouging. Invision 354MP 354MP/456MP Issued Aug. 27 Index No. DC/23 Invision MIG Welding Power Source Quick Specs Industrial Applications Metal Fabrication Heavy Manufacturing Construction Light Manufacturing Processes MIG (GMAW)

More information

3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range

3202 PowerMaster brochure 18/5/06 4:37 PM Page 2 PowerMaster Range PowerMaster Range Thermal Arc Professional: when welding is your business Thermal Arc is on the move! The Thermal Arc family of arc welding equipment has been completely overhauled, re-engineered and expanded

More information

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It. Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG Welders Fully

More information

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It.

Millermatic Series. All-In-One MIG Buyer s Guide. Everything You Need Everywhere You Need It. Millermatic Series All-In-One MIG Buyer s Guide Everything You Need Everywhere You Need It. Table Of Contents Sept. 2010 Everything You Need 4 Everywhere You Need It A Complete Line Of 5 All-In-One MIG

More information

MAKE WORK FLY. Eagle 10,000 Plus KEY FEATURES

MAKE WORK FLY. Eagle 10,000 Plus KEY FEATURES MAKE WORK FLY Eagle 10,000 Plus Shown: K2343-3 KEY FEATURES A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Eagle 10,000 Plus does a variety

More information

Tough, Compact... and Portable

Tough, Compact... and Portable INERTER Tough, Compact... and Portable ArcMaster power source comes with: Power cord 2 x dinse mm plugs Operating manual 5Year * Quick Specifications Processes STICK () TIG () Lift MIG (GMAW)** Flux Cored

More information

SERVICE BULLETIN SB1250

SERVICE BULLETIN SB1250 SERVICE BULLETIN SB1250 ADDRESSEES SYSTEM COMPONENT BULLETIN TYPE : ABC Customer Care and Parts Source (Other) Owners and operators of coaches listed under Application : Rear Axle Chassis Reinforcement

More information

FRISCH ENGINEERED PRODUCTS INC.

FRISCH ENGINEERED PRODUCTS INC. FRISCH ENGINEERED PRODUCTS INC. TRIPLE OFFSET BUTTERFLY VALVES Known by the companies we keep 382-16 th Street West Box 1570 Battleford, SK, Canada S0M 0E0 Ph: 306-937-4353 Fax: 306-937-2257 Email: info@frischvalves.com

More information

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A)

Processes MIG (GMAW)/Pulsed MIG (GMAW-P)* Stick (SMAW) TIG (GTAW) Flux Cored (FCAW) Air Carbon Arc Cutting and Gouging (CAC-A) XMT 350 Series Issued August 2010 Index No. DC/18.83 Multiprocess Welding Power Source Quick Specs Heavy Industrial Applications Construction Shipbuilding Railroad Truck/Trailer Manufacturing Fabrication

More information

Check Valve (Next Generation) A-180 and A-183 Series. Installation, Operation & Maintenance (IOM) Manual. P/N: A-180/A-183, Rev. 6.

Check Valve (Next Generation) A-180 and A-183 Series. Installation, Operation & Maintenance (IOM) Manual. P/N: A-180/A-183, Rev. 6. P/N: Issue Date: January 12, 2018 Supersedes: A-180/A-183, Rev. 6.1 Check Valve (Next Generation) A-180 and A-183 Series Installation, Operation & Maintenance (IOM) Manual Manual content is subject to

More information

Radionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x

Radionuclide atomic number A 1 (TBq) A 1 (Ci) A 2 (TBq) A 2 (Ci) (TBq/g) (Ci/g) Ac-225 Actinium(89) x x Ac-225 Actinium(89) 0.6 16.2 1x10-2 0.270 2.1x10 3 5.8x10 4 Ac-227 40 1080 2x10-5 5.41x10-4 2.7 7.2x10 1 Ac-228 0.6 16.2 0.4 10.8 8.4x10 4 2.2x10 6 Ag-105 Silver(47) 2 54.1 2 54.1 1.1x10 3 3.0x10 4 Ag-108m

More information

Description. Order TECHNICAL SPECIFICATIONS

Description. Order TECHNICAL SPECIFICATIONS SEMIAUTOMATIC WIRE FEEDERS Semiautomatic, Constant Speed Wire Feeders The are semiautomatic constant speed wire feeders that provide dependable performance and reliable operation, making them ideal for

More information

WIRTGEN GROUP ORIGINAL SPARE PARTS

WIRTGEN GROUP ORIGINAL SPARE PARTS CLOSE TO OUR CUSTOMERS WIRTGEN GROUP ORIGINAL SPARE PARTS Special campaign 2017 / 2018 CAMPAIGN PERIOD 01/11/2017 until 31/03/2018 WIRTGEN GROUP I PARTS SPECIAL CAMPAIGN ORIGINAL WIRTGEN GROUP PARTS SPECIAL

More information

PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS

PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS PROFESSIONAL BODY SHOP DENT PULLING WELDING SYSTEMS TOOLS 2018 PRODUCT GUIDE Dent Pulling Solutions for Steel & Aluminum Dual-Spotter Solutions for Steel & Aluminum Panels UNI-9700 DELUXE Aluminum & Steel

More information

LF-72 and LF-74 Wire Feeders

LF-72 and LF-74 Wire Feeders SEMIAUTOMATIC WIRE FEEDERS LF-72 and LF-74 Wire Feeders 2-Roll or 4-Roll Heavy Duty Industrial Feeders Designed for MIG and cored wire welding in job shop and manufacturing environments, the rugged LF-72

More information

Welding. Product Catalogue. Total Welding & Cutting Solutions ISO 9001 ISO OHSAS PREMIUM QUALITY

Welding. Product Catalogue. Total Welding & Cutting Solutions ISO 9001 ISO OHSAS PREMIUM QUALITY Welding Product Catalogue LAUNCH PROMOTION Total Welding & Cutting Solutions ISO 9001 ISO 14001 OHSAS 18001 PREMIUM QUALITY Quality & Standard ISO 9001 ISO 14001 OHSAS 18001 Developed according to international

More information

Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources

Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources Arc/Mig/Engine-Driven Welding Plasma Arc Cutting Power Sources FP90 Enjoy the ease of wire feed welding at an affordable price. This unit operates on standard 115 volt household current and requires no

More information

C&N Industrial Group Limited. Better Pipeline, Better Connection.

C&N Industrial Group Limited. Better Pipeline, Better Connection. C&N Industrial Group Limited Better Pipeline, Better Connection. About C&N Flange & Fitting producing Steel pipe expand & Welding Pipe accessories(jiangsu) Pipeline technology consult Incorporate on C&N

More information

70 Series Swingarc Boom-Mounted

70 Series Swingarc Boom-Mounted 70 Series Swingarc Boom-Mounted Wire Feeder Issued Jan. 2015 Index No. M/13.11 Quick Specs Heavy Industrial Applications Heavy Manufacturing Metal Fabrication Construction Light Manufacturing Processes

More information

Screwpump. Series D GB. General Description. Model Code D 4

Screwpump. Series D GB. General Description. Model Code D 4 Screwpump Series D4 A Member of the COLFAX PUMP GROUP Handling of hydraulic oils, seal oils and fuel oils Max. working pressure: 160 bar Flow range: 10-850 I/min General Description Positive constant displacement,

More information