DP33 Pump. 60:1, 3+3, Air-operated, Grease. General. Operation. Technical Data. Installation R2 08/15

Size: px
Start display at page:

Download "DP33 Pump. 60:1, 3+3, Air-operated, Grease. General. Operation. Technical Data. Installation R2 08/15"

Transcription

1 DP33 Pump 0:1, 3+3, Air-operated, Grease General The DP33 Pump is a compressed air-operated reciprocating piston pump designed to pump all types of mineral greases. Suitable for installations with medium length piping to supply up to three grease outlets simultaneously. This pump is mounted directly on 120 lb and 00 lb drums. Operation This pump is self-priming. To prime it the first time, connect the air supply to the pump while keeping the outlet gun opened and increase the air pressure from 0 to the desired pressure slowly using a pressure regulator. Once grease starts flowing through all the outlets, the pump is primed. The pump starts to pump automatically when the outlet valve is opened. (Note: It is important that the lower valve does not come into contact with contaminated surfaces, such as a workshop floor, as it may become contaminated with dirt or foreign particles that can damage the pump mechanism.) Technical Data Maximum Air Pressure Minimum Air Pressure Maximum 100 psi Air Inlet Thread Grease Outlet Thread Air Piston Diameter Air Piston Stroke 10 psi (10 bar) 0 psi (3 bar) 2. lb (1200 gr/min) 3/8 BSP 3/8 BSP 3 (75mm) 3 (75mm) Installation To install the pump on the drum, use the included bung adapter. Fasten the cover (part #F193 for 120 lb keg and part #F1938 for 00 lb drum) onto the drum and screw the nut of the bung adapter into the 2 bung opening of the cover. Insert the pump through the nut and fix it with the star nut to the desired height. Always keep fingers and hands away from moving parts. Do not dent or damage the riser tube. Ensure that the mounting surface and attachments are strong enough to support the lift and pump assembly during operation. 1

2 Typical Layout See drawing below for typical layout with all the recommended accessories for the pump to operate correctly. The compressed air supply must be fixed between 0 and 10 psi (3 and 10 bar). The recommended pressure is 90 psi ( bar). An air shut-off valve must be installed to be able to close the compressed air line at the end of the day (if the air inlet is not closed and there is leakage in some point of the grease outlet circuit, the pump will start automatically, emptying the container). Item A B C D E F G H I J 2 Description Air shut-off valve (LP) Filter regulator 2 air hose Quick coupling Connection nipple 55:1 Pump 5 grease hose Grease shut-off valve (HP) Cover (00 lb drum) Follower plate

3 Maintenance Separate the Air Motor from the Pump 1. Attach the pump to a vice in horizontal position, securing it by the suction tube. Unthread the air motor from the suction tube () and pull out the air motor until the pin (3) becomes visible. 2. Remove the pin and unthread the rod (3) until it s free. (See drawing on right.) Refer to page 5 for parts reference. Before starting any kind of maintenance or repair, disconnect the compressed air supply and open a downstream valve to relieve the grease pressure. Replace the Air Distributor 1. Unthread the plug (23) and remove the circlip (13), the muffler (1) and the muffler support (15). 2. Remove the distributor axle (21). 3. Unthread the screw (8) completely and carefully remove the distributor bushing (1).. Lubricate the new distributor bushing (1) with its O-rings, insert it from the side of the plug (23) and hold something to stop it at the side of the muffler (1). Be very careful not to damage the bushing (1) or the O-rings. Clean the Muffler 1. Unthread the filter plug (19) and remove the muffler (18). 2. Clean the muffler (18) carefully and replace it in position; reinstall the filter plug (19). Remove pin and unthread the rod Replace the Air Motor Seal 1. Unthread the plug (1) and remove the cover (2). Unthread the nut (3) and remove the washer (), the guide ring (5) and the air escape ring (11) with their O-rings, and the washers (10). 2. Unthread the screws (20) and remove the inverter head (17). 3. Unthread the inverter rod (2) and remove the O-rings ().. Unthread the screws (37), remove the air cylinder (28) and take out the piston assembly (25, 32 and 0). 5. Replace the damaged parts and assemble following previous instructions, reversing each step. Replace the Packing Set 1. Follow steps 1 through 5 of the Air Motor Seals procedure. 2. Remove the circlip (35) and take out the packing set body (2). 3. Remove the outlet valve () from the current packing set and put it on the new packing set.. Assemble the pump following previous instructions, reversing each step. Clean or Replace the Foot Valve 1. Remove the threaded plug (73) and the filter (72), unthread the nut (71) from the priming rod and remove the primer (70). 2. Push in the priming rod (50) and unthread the priming tube (9) using the provided holes and remove it. 3. Take out the components of the valve (3-) and clean them carefully, replace any if damaged.. Assemble the pump following the previous instructions, reversing each step. 3

4 Clean or Replace the Upper Valve 1. Unthread and remove the foot valve tube (1) from the pump tube (50) and take out the connection rod (52) together with the high pressure piston (5). 2. Gently push out the packing assembly (57-0) from the pump tube (50) using a ø19mm tube and clean it carefully, replace any if damaged. 3. Remove the pin that holds the connection rod (52) to the high pressure piston (5) and unthread the piston. Take out the components of the upper valve (53-55) and clean them carefully, replace any if damaged.. Assemble the pump following the previous instructions, reversing each step. Refer to page 5 for parts reference. Before starting any kind of maintenance or repair, disconnect the compressed air supply and open a downstream valve to relieve the grease pressure. Troubleshooting Symptom Possible Cause Remedy The pump is not working or there is no grease delivery. The pump begins to operate very fast. The pump runs on continuously after the grease outlet is closed. Grease is leaking through the outlet muffler. Air is leaking through the outlet muffler. Not enough air supply pressure. Some outlet line component is clogged or closed. There are air pockets in the grease inlet area. The drum is empty or the grease level is beneath the suction tube inlet. There is a grease leak in some point of the outlet circuit. Grease has by-passed to the air motor caused by worn or damaged packing set. The O-rings of the distributor axle (21) or the bushings (1) are worn or damaged. The inverter O-rings are worn or damaged. Slowly increase the air supply pressure. Clean or open the outlet circuit. Stir and compact the grease. Replace the drum or lower the suction tube until the inlet reaches below the grease level. Verify and tighten or repair. Replace the worn or damaged parts. Replace the axle assembly (21) and/ or bushing assembly (1). Replace the inverter O-rings. Decrease of the grease delivery. Dirt in upper valve or the foot valve. Dismount and clean, replace if damaged. Dirt in muffler (18). Dismount and clean/replace muffler. How to Order Description Drum Size Part # DP33 Pump 120 lb F lb F33 When ordering, specify by name, description and part number, e.g. DP33 Pump, 120 lb Drum, Part #F332.

5 Service Parts Diagram See page for diagram

6 Service Parts Item Description Part # 13 Circlip F Muffler F Outlet valve F7031 Pump tube (for part #F33) F7037 Pump tube (for part #F332) F Connection rod (for part #F33) F8059 Connection rod (for part #F332) F800 5 Bung adapter F Reversing mechanism kit F70973 (1) --- (21) --- (22) Air motor seals kit F7097 () --- () --- (7) --- (9) --- (10) --- (12) --- (2) --- (2) --- (30) --- (31) --- Service Parts (Cont.) Item Description Part # --- Air motor seals kit F7097 () --- () --- (7) --- (9) --- (10) --- (12) --- (2) --- (2) --- (30) --- (31) Foot valve kit F7097 (3) --- (5-52) Seal kit F70975 (2) --- (3) --- (3) --- (2) Mufflers & air filters kit F70977 (13) --- (1) --- (18) --- See parts list on page 5.

7 Dimensional Schematics Measurements shown in millimeters. Part # A B F mm (39.7 ) 730mm (28.7 ) F mm (7.8 ) 925mm (3. ) 7

DP556 Pump. 55:1, Air-operated, Grease. General. Operation. Technical Data. Installation. Mounting with Reinforced Cover (Recommended)

DP556 Pump. 55:1, Air-operated, Grease. General. Operation. Technical Data. Installation. Mounting with Reinforced Cover (Recommended) DP556 Pump 55:1, Air-operated, Grease General The DP556 Pump is a compressed air-operated reciprocating piston pump. This high capacity demand pump is compatible with mineral and synthetic grease and suitable

More information

DP3 Pump. 3:1, Air-operated, Oil. General. Operation. Technical Data. Installation R0 10/09. 35a 35b 35c

DP3 Pump. 3:1, Air-operated, Oil. General. Operation. Technical Data. Installation R0 10/09. 35a 35b 35c DP3 Pump 3:1, Air-operated, Oil General The DP3 Pump is a compressed air-operated piston reciprocating medium pressure pump. Suitable for medium flow transfer of high viscosity lubricants and for oil delivery

More information

DP5 Pump. 5:1, Air-operated, Heavy Duty, Oil. General. Operation. Technical Data. Installation R1 09/10

DP5 Pump. 5:1, Air-operated, Heavy Duty, Oil. General. Operation. Technical Data. Installation R1 09/10 DP5 Pump 5:1, Air-operated, Heavy Duty, Oil General The DP5 Pump is a compressed air-operated reciprocating piston medium pressure pump. These pumps are suitable for distribution of all types of light

More information

AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23

AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23 AIR OPERATED GREASE PUMPS AND KITS PUMPMASTER 3 20 PUMPMASTER 3+3 20 PUMPMASTER 6 21 GREASE PUMP KITS 22 PUMP ACCESSORIES 23 404 100 / 407 200 / 409 200 PUMPMASTER 3 & 3+3 PUMPMASTER 3, 55:1 PRESSURE RATIO

More information

Lynx 3:1 Pump. Model: OPERATION, INSTALLATION, MAINTENANCE AND REPAIR GUIDE

Lynx 3:1 Pump. Model: OPERATION, INSTALLATION, MAINTENANCE AND REPAIR GUIDE SERVICE BULLETIN SB1101 Revision F 10/13 Lynx 3:1 Pump Model: 1110-007 Thoroughly read and understand this manual before installing, operating or servicing this equipment. OPERATION, INSTALLATION, MAINTENANCE

More information

AIR OPERATED OIL PUMPS AND KITS

AIR OPERATED OIL PUMPS AND KITS PM 2 PumpMaster 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. Model 24 PumpMaster 2, : ratio stub

More information

Troubleshooting Guide for Pumps ATD ATD ATD5289

Troubleshooting Guide for Pumps ATD ATD ATD5289 PROBLEM: Your pump does not work? There are Three Basic Problems! Troubleshooting Guide for Pumps ATD5217 - ATD5219 - ATD5289 Air Motor Operates but nothing comes out. This is the most common problem.

More information

Air Operated Grease Ratio Pumps 50:1 BGRP

Air Operated Grease Ratio Pumps 50:1 BGRP INSTRUCTION MANUAL S1350, Rev C Air Operated Grease Ratio Pumps 50:1 BGRP Congratulations on purchase of this World Class Air Operated Grease Ratio Pump! World-class Industrial High Pressure Grease pump

More information

AIR OPERATED OIL PUMPS AND KITS

AIR OPERATED OIL PUMPS AND KITS PM 2 AIR OPERATED OIL PUMPS AND KITS PM 2 Oil pump, pressure ratio : 0 Double acting air operated pumps for transferring lubricants and other non-corrosive fluids. Pump includes bung adapter. New Model

More information

50:1 Grease Pump Kits

50:1 Grease Pump Kits TM INS680A Published: 6/0/00 Revised 7/8/06 50: Grease Pump Kits Models L680A Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions

More information

OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL

OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL 301A Diesel Polypropylene Fuel Storage Rotary & Dispensing Drum Pump Kits 60040PA 301A 60045P Description The 600 litre series diesel fuel storage & dispensing

More information

Model 8329 Table of Contents

Model 8329 Table of Contents SERVICE & OPERATING MANUAL Original Instructions Instructions Sheet: 670991 Model 8329 Table of Contents Engineering Data and Temperature Limitations... 1 Performance Curve... 2 Dimensions... 3 Metric

More information

SINGLE ACTION FLUID PUMP

SINGLE ACTION FLUID PUMP SINGLE ACTION FLUID PUMP MODELS 4490, 4491, 4492 S SERIES A Model 4492 (Stub Pump) Model 4491 (250-275 Gal) Model 4490 (16-55 Gal) Model A52347R-248 (250-275 Gal NOV - 2006 Section -A6 Page -63A Table

More information

MODEL T26746 FOOT-OPERATED GREASE PUMP INSTRUCTIONS

MODEL T26746 FOOT-OPERATED GREASE PUMP INSTRUCTIONS MODEL T26746 FOOT-OPERATED GREASE PUMP INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T26746 Foot-Operated

More information

Fast-Flo Pump INSTRUCTIONS-PARTS LIST. Table of Contents 1:1 RATIO

Fast-Flo Pump INSTRUCTIONS-PARTS LIST. Table of Contents 1:1 RATIO INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 07 7 Rev. Z Supersedes W Includes Rev. Y changes

More information

Stub pump 3:1. User and maintenance instructions. Models and , series D. Date of issue December Form number

Stub pump 3:1. User and maintenance instructions. Models and , series D. Date of issue December Form number User and maintenance instructions Stub pump 3: Models 282396 and 282398, series D Date of issue December 207 Form number 404099 Section Page A6 37V Contents Safety........................... 2 Explanation

More information

IMPORTANT NOTE The warranty will be void if the pump has been altered in any way

IMPORTANT NOTE The warranty will be void if the pump has been altered in any way For technical questions and replacement parts, please call -800--788. Thank you very much for choosing a Northern Industrial Product! For future reference, please complete the owner's record below: Model:

More information

Instructions Parts List

Instructions Parts List Instructions Parts List : RATIO Fast Flo Pump Air operated piston transfer pump for low viscosity fluids. For professional use only. Only models that are EX certified are approved for use in European explosive

More information

GROUP CONTENTS GENERAL DESCRIPTION RADIATOR SPECIAL TOOL THERMOSTAT ENGINE COOLING DIAGNOSIS...

GROUP CONTENTS GENERAL DESCRIPTION RADIATOR SPECIAL TOOL THERMOSTAT ENGINE COOLING DIAGNOSIS... 14-1 GROUP 14 CONTENTS GENERAL DESCRIPTION 14-2 SPECIAL TOOL 14-2 ENGINE COOLING DIAGNOSIS 14-3 INTRODUCTION 14-3 TROUBLESHOOTING STRATEGY 14-3 SYMPTOM CHART 14-3 SYMPTOM PROCEDURES 14-4 ON-VEHICLE SERVICE

More information

IMPORTANT NOTE The warranty will be void if the pump has been altered in any way

IMPORTANT NOTE The warranty will be void if the pump has been altered in any way For technical questions and replacement parts, please call -800-556-7885. Thank you very much for choosing a Northern Industrial Product! For future reference, please complete the owner's record below:

More information

Model Table of Contents. SERVICE & OPERATING MANUAL Original Instructions. Instructions Sheet:

Model Table of Contents. SERVICE & OPERATING MANUAL Original Instructions. Instructions Sheet: SERVICE & OPERATING MANUAL Original Instructions Instructions Sheet: 670989 Model 8324 Table of Contents Engineering Data and Temperature Limitations... 1 Performance Curve... 2 Dimensions... 3 Metric

More information

Lube PUMP PACKAGES. pumpmaster 3+3 and 6

Lube PUMP PACKAGES. pumpmaster 3+3 and 6 stationary grease pump packages pumpmaster 3+3 and 6 Model 336000 PumpMaster 3 + 3 grease pump package for 120 lb kegs 332 PumpMaster 3 + 3 high pressure grease pump with bung adapter 1936 120 lb keg cover

More information

Air Operated 1:1 Oil Ratio Pump OP-11

Air Operated 1:1 Oil Ratio Pump OP-11 INSTRUCTION MANUAL Air Operated 1:1 Oil Ratio Pump OP-11 Congratulations on purchase of this World Class Air Operated Oil Ratio Pump! S1221, Rev C World-class Industrial Oil Dispensing pumps with guaranteed

More information

Air operated chassis pump

Air operated chassis pump User and maintenance instructions Air operated chassis pump Models 84667 and 84668, series A Date of issue June 207 Form number 40354B Contents Description....................... 2 Safety information................

More information

Air / Hydraulic Pump

Air / Hydraulic Pump Form No. 538016 Parts List & Operating Instructions for: 2510A Original Instructions Air / Hydraulic Pump Maximum Capacity: 690 bar (10,000 psi) Description: The 2510A air/hydraulic pump is designed to

More information

SERVICE INSTRUCTIONS. Material Pump

SERVICE INSTRUCTIONS. Material Pump TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and

More information

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R3 09/09

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R3 09/09 MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed output pumping elements to discharge grease

More information

STATIONARY GREASE PUMP PACKAGES. Model PM grease pump package for 120 lb kegs lb drum cover 966 Follower plate for 400 lb drum

STATIONARY GREASE PUMP PACKAGES. Model PM grease pump package for 120 lb kegs lb drum cover 966 Follower plate for 400 lb drum STATIONARY GREASE PM 3+3 AND 6 Model 336 000 PM 3 + 3 grease pump package for 120 lb kegs 332 PM 3 + 3 high pressure grease pump with bung adapter 1936 120 lb keg cover 964 Follower plate for 120 lb keg

More information

Instruction Manual. Maple 7/15 Pump. Model

Instruction Manual. Maple 7/15 Pump. Model Maple 7/15 Pump Model 10 40 41 Page 2 of 16 Specification Pump Ratio 15:1 Max. Air Pressure Inlet Max. Fluid Pressure Nominal Flow Volume / Cycle 7 Bar 105 Bar 0.166 Litres 0.044 US Gall Fluid Output @

More information

Farval. Dualine Installation System Start-Up. Bulletin DL300 BIJUR DELIMON INTERNATIONAL

Farval. Dualine Installation System Start-Up. Bulletin DL300 BIJUR DELIMON INTERNATIONAL Farval Dualine Installation System Start-Up Bulletin DL300 BIJUR DELIMON INTERNATIONAL 2685 Airport Road Kinston, NC 28504 Tel. 800-227-1063 Fax: 252-527-9232 website: www.bijurdelimon.com DC1-1 SECTION

More information

Service Guide. High-Pressure Grease Pump. 100 psi (6.8 bar) High-Pressure Pump Model 7785 Series Specifications

Service Guide. High-Pressure Grease Pump. 100 psi (6.8 bar) High-Pressure Pump Model 7785 Series Specifications Description Service Guide 7785-A5 7785-B5 7785-MA The major components of the pump models in the 7785 series consist of an air-operated motor and a pump tube. The air motor connects directly to the double-acting

More information

INSTRUCTION MANUAL. Portable Greasing System S1180, REV C GS

INSTRUCTION MANUAL. Portable Greasing System S1180, REV C GS INSTRUCTION MANUAL S1180, REV C Portable Greasing System GS-5 Fully Portable & single person operation manual greasing system designed for volume greasing in workshop environments, site applications, on

More information

Air-Assist Service Jack Max. Capacity: 10 Tons

Air-Assist Service Jack Max. Capacity: 10 Tons Form No. 565786 Parts List & Operating Instructions for: 1511B Air-Assist Service Jack Max. Capacity: 10 Tons 109 67 66 68 77 69 70 78 95 94 107 106 108 26 71 72 72 93 X L 65 75 92 91 90 89 88 87 86 85

More information

Instructions for Installation, Operation, Care and Maintenance

Instructions for Installation, Operation, Care and Maintenance Bulletin 407 Rev. T Model E Alarm Check Valve Bulletin 407 Rev. T Instructions for Installation, Operation, Care and Maintenance 4 (100 mm), 6 (150 mm), 8 (200 mm) Sizes With Model E3 Trim Listed by Underwriters

More information

INSTALLATION INSTRUCTIONS FOR THE TRUCK MOUNTED VIPER ADDITIVE INJECTION SYSTEM GTP-8776C

INSTALLATION INSTRUCTIONS FOR THE TRUCK MOUNTED VIPER ADDITIVE INJECTION SYSTEM GTP-8776C INSTALLATION INSTRUCTIONS FOR THE TRUCK MOUNTED VIPER ADDITIVE INJECTION SYSTEM GTP-8776C This additive injection system was designed to be used with five gallon jug of additive. The system is supplied

More information

0.7 m 3 /h - 3 GPM D 07 RE 125 D 07 RE 5. owner s manual

0.7 m 3 /h - 3 GPM D 07 RE 125 D 07 RE 5. owner s manual 0.7 m 3 /h - 3 GPM D 07 RE 125 D 07 RE 5 owner s manual GB You have just become the owner of one of the latest in the line of DOSATRON proportional dosing pumps and we congratulate you on your choice.

More information

Paint Pumps INST Manual

Paint Pumps INST Manual OP Series Air Motor Paint Pumps INST Manual OPERATING MANUAL WITH PARTS IDENTIFICATION IPM INC. Manufactured by International Pump Manufacturing, Inc. Covers models: IP22, IP23 and IP24. Manual Number:

More information

WORKSHOP MANUAL. 63,4 cm³ chainsaws

WORKSHOP MANUAL. 63,4 cm³ chainsaws WORKSHOP MANUAL General failures analysis Suggested tools I. Emak tool kit II. Compression tester: to check thermal group III. Electronic tachometer: for 2 and 4 stroke engines, measurement range from

More information

TOTE TYPE INK PUMPS WARNING. Doc. No. INK 018U-05 Model No IP140S3-TE IP140S12-TE IP200S25-TE IP250S20-TE

TOTE TYPE INK PUMPS WARNING. Doc. No. INK 018U-05 Model No IP140S3-TE IP140S12-TE IP200S25-TE IP250S20-TE Doc. No. INK 018U-05 Model No. 881042 IP140S3-TE 881051 IP140S12-TE 881030 IP200S25-TE 881031 IP250S20-TE TOTE TYPE INK PUMPS WARNING When air is supplied to the pump or when the inner pressure is not

More information

2062 ½ NPTM x ¼ NPTF bushing ½ NPTM x 3/8 NPTF bushing ½ NPTM x 3/8 NPTF bushing

2062 ½ NPTM x ¼ NPTF bushing ½ NPTM x 3/8 NPTF bushing ½ NPTM x 3/8 NPTF bushing stationary grease pump packages pumpmaster 3, 3+3 and 6 3 Model 306000 PumpMaster 3 grease pump package for 120 lb kegs 302 PumpMaster 3 high pressure grease pump with bung adapter 1936 120 lb keg cover

More information

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R6 08/17

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R6 08/17 MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to

More information

SERVICE GUIDE 8540-B 8549-B C. High-Pressure Lubricant Pump DESCRIPTION. Pump Assembly. Specifications

SERVICE GUIDE 8540-B 8549-B C. High-Pressure Lubricant Pump DESCRIPTION. Pump Assembly. Specifications SERVICE GUIDE 8540-B 8549-B1 8549-C DESCRIPTION The major components of the high-pressure pump models in this series consist of a(n): air-operated motor lubricant pressure controller (pressurtrol) double-acting

More information

SERVICING INSTRUCTIONS

SERVICING INSTRUCTIONS TSP Series 66 Triplex Plunger Pump SERVICING INSTRUCTIONS TRIPLEX TRIPLEX SERVICING PUMP PROCEDURES Valve Replacement: All inlet and discharge valves can be serviced without disrupting the inlet or discharge

More information

Crispin Valves Operating Guide. Crispin

Crispin Valves Operating Guide. Crispin Crispin Valves Operating Guide Crispin Since 1905 Crispin Multiplex Manufacturing Co. 600 Fowler Avenue Berwick, PA 18603 1-800-AIR-VALV T: (570) 752-4524 F: (570) 752-4962 www.crispinvalve.com sales@crispinvalve.com

More information

OWNER S TECHNICAL MANUAL

OWNER S TECHNICAL MANUAL OWNER S TECHNICAL MANUAL 2.5kg Grease Kit 6336 Description The Champion 6336 2.5kg grease kit is a manually operated, spring powered grease kit that comes complete with a hand piece. It is designed to

More information

OWNER S TECHNICAL MANUAL. 6336N 2.5kg Grease Kit

OWNER S TECHNICAL MANUAL. 6336N 2.5kg Grease Kit OWNER S TECHNICAL MANUAL 6336N 2.5kg Grease Kit 6336N Description The 6336N 2.5kg grease kit is a manually operated, spring powered grease kit with ergonomic, user friendly rod cap that comes complete

More information

Assembly instructions

Assembly instructions Assembly instructions CP-Lube kit RX4,RX8,RX22,RX25,RX29,RX45,RX53 CP-Lube kit RX 4 CP-Lube kit RX 8 CP-Lube kit RX 22 CP-Lube kit RX 25 CP-Lube kit RX 29 CP-Lube kit RX 45 CP-Lube kit RX 53 Valid from

More information

PRODUCT: 1500 SERIES MOBILE EXPLOSION PROOF PAGE 1 REV "BLADE MASTER" AC-EP-SINGLE PHASE-1.5 HP OPERATING AND MAINTENANCE INSTRUCTIONS

PRODUCT: 1500 SERIES MOBILE EXPLOSION PROOF PAGE 1 REV BLADE MASTER AC-EP-SINGLE PHASE-1.5 HP OPERATING AND MAINTENANCE INSTRUCTIONS PRODUCT: 1500 SERIES MOBILE EXPLOSION PROOF PAGE 1 REV.020112 "BLADE MASTER" AC-EP-SINGLE PHASE-1.5 HP OPERATING AND MAINTENANCE INSTRUCTIONS The "Blade Master is a high-volume, low-energy, (U.L. /C.S.A.,

More information

EURO BEAD BREAKER MODEL # Instruction Manual Parts Breakdown

EURO BEAD BREAKER MODEL # Instruction Manual Parts Breakdown EURO BEAD BREAKER MODEL #10107 Instruction Manual Parts Breakdown Operation WARNING The optional air/hydraulic pump is capable of generating fluid pressure up to 10,000 PSI. Keep both hands on the handles

More information

LIQUIDYNAMICS 1:1, 3:1 and 5:1 RATIO AIR OPERATED OIL PUMPS

LIQUIDYNAMICS 1:1, 3:1 and 5:1 RATIO AIR OPERATED OIL PUMPS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. LIQUIDYNAMICS 1:1, 3:1 and 5:1 RATIO AIR OPERATED OIL PUMPS Instruction & Parts Manual This manual covers the following

More information

THE MANUAL OF OIL PUMP

THE MANUAL OF OIL PUMP THE MANUAL OF OIL PUMP Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage.

More information

UV PROCESS SUPPLY, INC.

UV PROCESS SUPPLY, INC. UV PROCESS SUPPLY, INC. GENERAL DESCRIPTION The ¼ Diaphragm Pump others high volume delivery even at low air pressures, easy self-priming, the ability to pump various viscosity materials and the ability

More information

OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80. A JDA Global Company

OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80. A JDA Global Company OPERATION MANUAL 3 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF 80 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the

More information

OWNER/OPERATOR MANUAL. Airmotor effective dia. in. 2.5

OWNER/OPERATOR MANUAL. Airmotor effective dia. in. 2.5 MODELS 282050, 282716 & 283513 AIR OPERATED CHASSIS PUMP SERIES A OWNER/OPERATOR MANUAL SPECIFICATIONS Airmotor effective dia. in. 2.5 Airinlet Material outlet 1/4 NPTF 1/4 NPTF Liquid to Air Pressure

More information

Operator's Manual. Models (¾") (1") (1½ ) (2 ) (3") (4") (6") (8")

Operator's Manual. Models (¾) (1) (1½ ) (2 ) (3) (4) (6) (8) OdisMatic Hydraulic Filter Series 851 Operator's Manual Models 85107 (¾") 85101 (1") 85115 (1½ ) 85102 (2 ) 85103 (3") 85104 (4") 85106 (6") 85108 (8") Content 1. Technical Specifications. 2. Materials.

More information

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron

Self-Priming Close-Coupled Centrifugal Pumps In 316 Stainless Steel, Bronze and Cast Iron Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect

More information

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R8 08/18

MultiPort Lubricator. Electric motor-driven, Grease and Oil. General. Technical Data. Motor R8 08/18 MultiPort Lubricator Electric motor-driven, Grease and Oil General The MultiPort Lubricator is a rugged, motor-driven, electric lubricator, equipped with fixed or adjustable output pumping elements to

More information

12 SERIES. Product Information. Performance & Specs. All 300 Series S.S. construction. Compact, easy to mount 11" x 9" x 3", weighs only 7lb. 2 oz.

12 SERIES. Product Information. Performance & Specs. All 300 Series S.S. construction. Compact, easy to mount 11 x 9 x 3, weighs only 7lb. 2 oz. AEPB0 March 2009 2 SERIES 2 Features All 300 Series S.S. construction Compact, easy to mount " x 9" x 3", weighs only 7lb. 2 oz. Mounts in vertical position for easy operation Up to a maximum 5500 PSI

More information

NOTE: Visit our website at for video repair procedures, under the Tools section.

NOTE: Visit our website at   for video repair procedures, under the Tools section. Repair Instructions Hypro Repair Tools: Tool Box No. 3010-0168 1/4" Allen Wrench No. 3020-0008 Support Bars (2) No. 3010-0064 Port Brush No. 3010-0066 1/16" Allen Wrench No. 3020-0009 Brush Holder No.

More information

Operation, Installation, Maintenance and Repair Guide. HighFlo (HF) Control Handle. SERVICE BULLETIN SB 3097 Rev. A 6/14

Operation, Installation, Maintenance and Repair Guide. HighFlo (HF) Control Handle. SERVICE BULLETIN SB 3097 Rev. A 6/14 SERVICE BULLETIN SB 3097 Rev. A 6/14 HighFlo (HF) Control Handle Model 3320-051...HF Non-Metered Control Handle w/rigid extension, Semi-Auto tip, & 3/4 Swivel Model 3320-052... HF Non-Metered Control Handle

More information

High-Lift Wheel Dolly Max. Capacity: 1,500 lbs. (681 kg)

High-Lift Wheel Dolly Max. Capacity: 1,500 lbs. (681 kg) 55 Eisenhower Drive Owatonna, MN 5500-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-27 Fax: (800) 955-8329 Order Entry: (800) 533-27 Fax: (800) 283-85 International Sales: (507) 455-7223 Fax: (507)

More information

Operating Instructions & Parts Manual

Operating Instructions & Parts Manual Operating Instructions & Parts Manual Grainger Part No. 36NE08 Bucher Hydraulics Part No. M-3504-0239 Please read the instructions carefully and always operate this equipment in a safe manner. Unit Description:

More information

Pump Operating and Maintenance Manual - Models

Pump Operating and Maintenance Manual - Models Pump Operating and Maintenance Manual - Models 78-00111 - 78-0057 Thank you for purchasing the SDI Diaphragm Pump manufactured by Comet Pump. Comet produces quality products which are safe, efficient and

More information

Öhlins Front Fork for. Motocross and Enduro. Owner s Manual

Öhlins Front Fork for. Motocross and Enduro. Owner s Manual Öhlins Front Fork for Motocross and Enduro Owner s Manual Safety Precautions The front fork is a very important part of the vehicle and will therefore affect the stability. Read and make sure that you

More information

ADDITIONAL DOCUMENTATIONS SPARE PARTS

ADDITIONAL DOCUMENTATIONS SPARE PARTS SPECIFICATIONS AIRSPRAY PNEUMATIC PUMP model 04-120 Manual : 0311 573.035.212 Date : 20/11/03 ADDITIONAL DOCUMENTATIONS SPARE PARTS Wall mounted unit Doc. 573.072.050 Fluid section Doc. 573.049.050 Air

More information

Oregon Fuel Injection

Oregon Fuel Injection Cummins PT Fuel Pump Diagnostic No Start, with no smoke 1. This could be caused by the fuel pump not turning or a seized gear pump. Remove the fuel supply hose and the fuel inlet fitting from the gear

More information

Service Handbook. High-Pressure Washer Pump

Service Handbook. High-Pressure Washer Pump Pump 629 9/28/01 3:22 PM Page 1 Service Handbook High-Pressure Washer Pump 3.532-629.0 10.00 Pump 629 9/28/01 3:22 PM Page 2 Pump 629 9/28/01 3:22 PM Page 3 TROUBLESHOOTING OVERVIEW How to Use This Manual

More information

ACHL Series Pump. Operation and Maintenance Manual Air Driven, Hand Operated High Pressure Liquid Pump

ACHL Series Pump. Operation and Maintenance Manual Air Driven, Hand Operated High Pressure Liquid Pump ACHL Series Pump Operation and Maintenance Manual Air Driven, Hand Operated High Pressure Liquid Pump Catalog: 02-9245ME February 2013 Model # Serial # Drawing # Order # Mfg. Date Table of Contents page

More information

IMT Bead Breaker 1000

IMT Bead Breaker 1000 Manual Part Number 99903638 IMT Bead Breaker 000 Revised 2050423 Copyright 204 Iowa Mold Tooling Co., Inc. All rights reserved IOWA MOLD TOOLING CO., INC. PO Box 89 Garner, IA 50438 Tel: 64-923-37 FAX:

More information

ELECTRIC DIESEL AND OIL PUMPS

ELECTRIC DIESEL AND OIL PUMPS ELECTRIC DIESEL AND OIL PUMPS DC DIESEL PUMPS 78 AC DIESEL PUMPS 79 COMPACT ASSEMBLIES 80 DIESEL PUMP ACCESSORIES 81 ELECTRIC OIL PUMPS 82 ELECTRIC OIL PUMPS WITH ELECTRONIC PRESSURE SWITCH 83 EQUIPPED

More information

Prodigy HDLV System Troubleshooting - Generation III

Prodigy HDLV System Troubleshooting - Generation III Prodigy HDLV System Troubleshooting - Generation III Instruction Sheet P/N 1081071-05 Use the procedures listed in this document to isolate and correct common problems with Prodigy HDLV Systems. Refer

More information

Table 6-1. Problems and solutions with pump operations. No Fluid Delivery

Table 6-1. Problems and solutions with pump operations. No Fluid Delivery Table 6-1. and solutions with pump operations No Fluid Delivery Fluid level in the reservoir is low. Oil intake pipe or inlet filter is plugged. Air leak in the inlet line prevents priming or causes noise

More information

Check List for Optimal Filter Performance

Check List for Optimal Filter Performance Check List for Optimal Filter Performance There should be no back-pressure on the flush line. A 1 valve should have a 2 waste line, and a 1.5" or 2 valve should have a 3 waste line. Do not use rubber hosing

More information

LAWN SPRINKLER, IRRIGATION PUMP

LAWN SPRINKLER, IRRIGATION PUMP LAWN SPRINKLER, IRRIGATION PUMP MODEL #, SP0P, SP5P, SP20P, EL0P, EL5P, EL20P SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product.

More information

PACKING, HANDLING, TRANSPORTING AND STORING MOTORS

PACKING, HANDLING, TRANSPORTING AND STORING MOTORS PACKING, HANDLING, TRANSPORTING AND STORING MOTORS Make sure that the shaft of the motor is not loaded in any way and is protected from knocks. Axial loads or shocks may easily damage the bearings inside

More information

Panther HP Oil Pump Series

Panther HP Oil Pump Series SERVICE BULLETIN SB1064 Rev. X 06/18 Panther HP Oil Pump Series Model 1130-015...Panther HP Bare Oil Pump, 3:1 Model 1130-017... Panther HP Bare Oil Pump, 3:1, Flange Mount Model 1130-020*...Panther HP

More information

SERVICE INSTRUCTIONS. Transfer Pump

SERVICE INSTRUCTIONS. Transfer Pump TM TM SERVICE INSTRUCTIONS Transfer Pump 6799 DESCRIPTION Model 6799 is an air operated, self-priming, piston type transfer pump designed to transfer gasoline or diesel fuel at 30 gpm or oils up to SAE

More information

OPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS

OPERATION MANUAL. ALUMINUM Models DUCTILE Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS OPERATION MANUAL 2 METALLIC PUMP (CLAMPED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF50 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models DUCTILE Models 316 S.S. Models A JDA Global Company CAUTIONS - READ

More information

AIR/HYDRAULIC INJECTION GUN MODEL INSTRUCTIONS

AIR/HYDRAULIC INJECTION GUN MODEL INSTRUCTIONS I. OPERATION & DESCRIPTION The Air / Hydraulic Injection Gun is a high-pressure tool that should be used with caution and according to these instructions. IMPORTANT: The Gun is 0,000 psi rated. Do not

More information

k. Components not properly adjusted. Refer to machine technical manual for proper adjustment of components.

k. Components not properly adjusted. Refer to machine technical manual for proper adjustment of components. General Troubleshooting Charts General Troubleshooting Charts Use the charts on the following pages to help in listing all the possible causes of trouble when you begin diagnosing and testing of a machine.

More information

GA-160 Gas Amplifier

GA-160 Gas Amplifier GA-160 Gas Amplifier INSTALLATION, OPERATION & MAINTENANCE MANUAL INTERFACE DEVICES, INC. 230 Depot Road, Milford, CT 06460 Ph: (203) 878-4648, Fx: (203) 882-0885, E-mail: info@interfacedevices.com www.interfacedevices.com

More information

Sealweld Sales, Services and Training Saving clients Billions by preventing costly shutdowns and prolonging Valve and Actuator life since 1969

Sealweld Sales, Services and Training Saving clients Billions by preventing costly shutdowns and prolonging Valve and Actuator life since 1969 Sealweld Sales, Services and Training Saving clients Billions by preventing costly shutdowns and prolonging Valve and Actuator life since 1969 Presented By: Ward Hruza Branch Manager Houston, TX Knowledgeable

More information

810201,810202,810203,810204

810201,810202,810203,810204 810201,810202,810203,810204 IP02 SERIES 2:1 RATIO TRANSFER PUMP OPERATIONING MANUAL WITH PARTS IDENTIFICATION IPM, INC. Manufactured by International Pump Manufacturing, Inc. IP02 series 2:1 RATIO TRANSFER

More information

Industrial Pumping Equipment PileDriver III Series III Air Motor Features

Industrial Pumping Equipment PileDriver III Series III Air Motor Features PileDriver III Series III Air Motor Features These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs. Air motors are 3,

More information

Purging Air From Divider Block Lubrication Systems

Purging Air From Divider Block Lubrication Systems FROST ENGINEERING SERVICE Purging Air From Lubrication Systems A D I V I S I O N O F G E C S E Y S A L E S & S E R V I C E DESCRIPTION Divider block lubrication systems operate correctly only when all

More information

Low Pressure Transfer Systems

Low Pressure Transfer Systems Chapter 7b Low Pressure Transfer Systems Automotive Diesel Technology Understanding & Servicing Contemporary Clean Diesel Technology Gus Wright Low Pressure Transfer Layout of a low-pressure fuel transfer

More information

OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM

OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM OPERATION MANUAL.25 METALLIC PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM CAUTIONS - READ FIRST CAUTION: Do not apply compressed air to the exhaust port pump will not function. CAUTION: Do not exceed 79 C (174

More information

SERIES OPERATION AND MAINTENANCE MANUAL

SERIES OPERATION AND MAINTENANCE MANUAL SERIES OPERATION AND MAINTENANCE MANUAL This manual CONTAINS IMPORTANT WARNINGS, S and OTHER INSTRUCTIONS. Read and understand the instruction manual Carefully, before use and retain it for reference.

More information

To ensure proper installation, digital pictures with contact information to before startup.

To ensure proper installation,  digital pictures with contact information to before startup. Check List for Optimal Filter Performance? There should be no back-pressure on the flush line. A 1 valve should have a 2 waste line, and 2 valve should have a 3 waste line. Do not use rubber hosing or

More information

Twin Power. Manual. Pneumatic Multiturn actuator in Standard and ATEX design WARNING! WARNING! Mounting. Assembly example

Twin Power. Manual. Pneumatic Multiturn actuator in Standard and ATEX design WARNING! WARNING! Mounting. Assembly example Top Quality Valve Actuators Made in Sweden Twin Power Manual Pneumatic Multiturn actuator in Standard and ATEX design Mounting The Twin Power actuator works beyond reproach in all positions. Valves with

More information

MAINTENANCE INSTRUCTIONS

MAINTENANCE INSTRUCTIONS MAINTENANCE INSTRUCTIONS Direct Mount Pneumatic Actuators Double-Acting and Spring-Return Installation, Service and Operation Sizes 0052 through 0125 COMPONENT LIST Item Description 1 Housing 2 Pinion

More information

Model 100 Series Kits

Model 100 Series Kits Introductory Installation Information 1. Always install DAHL 100 on the vacuum (suction) side of transfer pump and ahead of any other filter: On domestic vehicles, remove the 3/8 inch I.D. hose from the

More information

Airless Spray Gun INSTRUCTIONS DP psi (345 bar) Maximum Working Pressure

Airless Spray Gun INSTRUCTIONS DP psi (345 bar) Maximum Working Pressure INSTRUCTIONS DP-6376 Airless Spray Gun 5000 psi (345 bar) Maximum Working Pressure INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Table of Contents Warnings......................................

More information

WORKSHOP MANUAL. Chainsaw GS35 GS350 MT350 MT3500

WORKSHOP MANUAL. Chainsaw GS35 GS350 MT350 MT3500 WORKSHOP MANUAL Chainsaw GS35 GS350 MT350 MT3500 General failures analysis Suggested tools I. Emak tool kit II. Compression tester: to check thermal group III. Electronic tachometer: for 2 and 4 stroke

More information

Industrial Pumping Equipment PowerMaster III

Industrial Pumping Equipment PowerMaster III PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.

More information

ADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL F

ADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL F SPECIFICATIONS AIRMIX PUMP model 20-25 Flowmax Manual : 0304 573.027.212 Date : 18/04/03 ADDITIONAL DOCUMENTATIONS FOR PUMP, MODEL 20-25 F SPARE PARTS : Wall mounting pump (doc. 573.122.050) Air motor

More information

Putty 2000 Chop Check Start-Up Instructions

Putty 2000 Chop Check Start-Up Instructions Putty 2000 Chop Check Start-Up Instructions MAGNUM VENUS PRODUCTS Putty 2000 Chop Check Start-Up Instructions START-UP INSTRUCTIONS NOTE: The regulators marked pump, air lift and ram extraction should

More information

Operating Instructions & Parts Manual

Operating Instructions & Parts Manual Operating Instructions & Parts Manual Grainger Model No. 36NE14 Bucher Hydraulics Model No. M-4509-0217 Please read the instructions carefully and always operate this equipment in a safe manner. Unit Description:

More information

1/2" AIR DRIVEN DIAPHRAGM PUMP

1/2 AIR DRIVEN DIAPHRAGM PUMP 1/2" DRIVEN DIAPHRAGM PUMP OPERATION AND SERVICE GUIDE O-1225D NOV. 2008 Page 1 of 6 Refer to Bulletin P-605, Parts List P-9151 DRIVEN, DOUBLE DIAPHRAGM PUMP MANUAL Congratulations on purchasing one of

More information

Service Bulletin Trucks Date Number Page

Service Bulletin Trucks Date Number Page Mack Trucks, Inc. Allentown, PA USA (Also applies to Mack Trucks Australia, Operation and Adjustment Only, CXX, CLX, CMH, CMM and CSM Models) (Supersedes SB313005 dated 03/24/08) Service Bulletin Trucks

More information