Dress and Appearance

Size: px
Start display at page:

Download "Dress and Appearance"

Transcription

1 Shop Safety Information Andover High School Explain how to work safely around these items. List Rules for using each item? Dress and Appearance Loose clothing shirts tucked Sleeves buttoned or rolled Me fix your Chevy

2 Hair Long hair tied or put under cap Watches Rings Bracelets Jewelry

3 Your Eyes Injuries are usually permanent OSHA approved safety glasses Side shields Face shields Air guns Metal chips Co-workers Shop Equipment An student must be very observant of the equipment he/she is using. Report or fix any equipment that is in need of repair for your safety and others

4 Frayed Electrical Cords shocked... wet floor Plug ins three prongs for a good ground Carefully string cords so they don t get tripped over Air Equipment Keep hoses in good repair Blow guns pointing at someone Safety glasses Skin cuts Spinning bearings

5 Vehicles in the shop Windows down! Parking brake! In park! Backing vehicles out of the shop I didn t see it.... Really

6 Clean up right away Spills Socks Cat litter Empty drain pan as soon as possible in approve containers Work area must be clean before you go home each evening! 1. Safety glasses Battery charger 2. Connect and disconnect when charger is off 3. Slow charge 4. Batteries emit hydrogen and oxygen gases that can explode when a spark occurs. 5. Ask your instructor for demonstration and training before using.

7 Batteries Hydrogen fumes When? Charging Discharging Hydrogen Bomb? Negative cable 1st off - last on Engine Fans and Belts Never stand in line with them with the engine running

8 Do you carry tools in you back pocket? Never leave a drop light on the carpet, on a seat or on the plastic dash 60 watts max..

9 Shop Ventilation Carbon Monoxide Effects of CO Odorless Headache Reduced mental alertness Dizziness Death

10 Always use exhaust hoses Connect to in floor vents Keep vents closed when not in use Connect to over head hoses South side of shop Supplemental shop air system Exhaust hoses will not catch all the exhaust.... Turn on the Supplemental air system whenever an engine is running Switch is to the right of the door going into the student break room

11 Never throw tools Hand Tools Sharp tools are safer than dull ones Never use two hammers as a punch Always be aware of were you are swinging the hammer Selecting the right tool can save you Make sure to use and clean tools that are being used Hand tools cause more injuries then power tools Do not hesitate to say something to another student who is not being safe

12 Drills 1. Firm grip on drill Drills 2. Unplug drill before removing or installing drill bit 3. Make sure the key is removed before starting 4. Do not wear loose clothing 5. Secure the work firmly 6. Wear safety glasses 7. Make sure drill is properly grounded 8. Do not stand on wet surface when using a power tool

13 Drills Make sure to secure objects to the table or vise Never grab a spinning object Use some type of clapping device for small objects Grinders

14 Grinders(wire wheel) 1. Eye protection must be worn at all times. Safety glasses and Full Face shield recommended 2. All guards must be properly adjusted. 3. The tool rest must be adjusted to 1/8 from the wheel. 4. Do not grind on the side of the grinding wheel. Grinders (continue) 6. Small pieces should be held with vise grip type pliers. 7. A wheel that is excessively worn or cracked should be discarded. 8. The glass safety shield should be clean, 9. Stand to one side when starting the machine.

15 Impact wrenches 1. Safety glasses 2. Use only Impact sockets 3. Do not over tighten, Know the torque of the bolt you are tightening. Floor Jack

16 Jacks 1. Inspect before using (oil leaks, missing or loose parts) 2. Look up the proper lift points if you do not know where to lift the car. 3. Make sure the jack is secure and properly aligned under the car. 4. Apply park brake or block wheels so car will not roll 5. Never raise car while someone is under it Never trust a jack, no safety catches Jacks (continue) 6. After you start to raise the car examine your lift points double check to make sure it is secure plus properly aligned 7. Always use a jack stand

17 Vehicle hoists Car must be centered by where the weight is.. Check book for lift points Have instructor check them Double check before going under Bounce the car from all four corners after lifting the car 6 Double check before going under Make sure safety locks are on and all the way down

18 Hoists 1. Inspect your lift daily 2. Do not override the operating control 3. Always keep lift area free of obstructions and debris 4. Ask your instructor for demonstration and training before using. Hoists(continue) 5. Make sure vehicle is centered and secured before raising it up into the air. 6. Make sure locks are engaged before walking underneath 7. Before Lowering make sure area is clear and it will not hit anything.

19 The lift pads must all be screwed in or out so that they contact the car at the same time Correct lift points

20 Mitchell on Demand Usually located in Suspension and steering Alignment Jacking and hoisting Computer lab Jacking a vehicle Correct lift points ONLY Mitchell is coded for the different types of lifts

21 Caution on FWD cars The rear axle has little strength. It s very easy to bend it out of alignment 1. Safety glasses Shop air 2. Do not spin bearings 3. Never aim an air hose at another student or at yourself 4. Be careful blowing off parts with blind holes it can redirect the air back at you.

22 Tire Changer 1. Safety glasses Tire Changer 2. Use correct lifting technique 3. Use a rubber lube to mount and dismount tires 4. Ask your instructor for demonstration and training before using.

23 Disc & Drum Brake lathe 1. Safety glasses 2. Know proper procedures for operation of lathe before using. Watch a demonstration from the instructor. Solvent tank 1. Safety glasses 2. Rubber gloves 3. Clean up any spills

24 Glass Beading Cabinet It s Like a sand blaster But we use glass. Not as Course (Softer finish) Glass beads 1. Make sure item to be glass beaded are free of water, oil, and greases 2. Blow off items with air before opening the door 3. Do not point blasting nozzle towards glass 4. Ask your instructor for demonstration and training before using.

25 Glass beads (continue) 5. Do not use air nozzle when door is open, close door when done. 6. If you blow off an item outside of the glass beader, please use eye protection. Gasoline 1. Store in an approved container (yellow cabinet in storage room) 2. Wipe up spills immediately 3. Never use as a cleaner. 4. When opening fuel lines use safety glasses, relieve fuel pump pressure and wrap a rag around the fuel line.

26 Liquids spilled on floor Clean up immediately with paper towel, rag or floor dry That s all folks

Modern Automotive Technology Chapter 5. The Auto Shop and Safety

Modern Automotive Technology Chapter 5. The Auto Shop and Safety Modern Automotive Technology Chapter 5 The Auto Shop and Safety Chapter 5 The Auto Shop and Safety Describe the typical layout of an auto shop List the type of accidents that can happen in an auto shop

More information

24 Volt - 3/8" Cordless Impact Wrench

24 Volt - 3/8 Cordless Impact Wrench 24 Volt - 3/8" Cordless Impact Wrench INSTRUCTION MANUAL Item # 3994040 IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electrical equipment such as this, basic safety precautions should always be followed

More information

Airless Spray Gun INSTRUCTIONS DP psi (345 bar) Maximum Working Pressure

Airless Spray Gun INSTRUCTIONS DP psi (345 bar) Maximum Working Pressure INSTRUCTIONS DP-6376 Airless Spray Gun 5000 psi (345 bar) Maximum Working Pressure INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Table of Contents Warnings......................................

More information

Cordless two speed drill/driver K 10613

Cordless two speed drill/driver K 10613 Cordless two speed drill/driver K 10613 SAFETY AND PRECAUTION 1 Consider work area environment. Do not expose tools to rain. Do not use tools in damp or wet locations Keep work area clean and well lit.

More information

FSG175 FENCE STAPLE GUN

FSG175 FENCE STAPLE GUN Kencove Farm Fence Supplies 344 Kendall Rd Blairsville, PA 15717 1-800-KENCOVE sales@kencove.com www.kencove.com OPERATING MANUAL FSG175 FENCE STAPLE GUN To reduce the risk of possible injury, read the

More information

GENERAL HOUSEKEEPING. 1. Are all aisles, passageways, stairways and stairwells kept clear of tools, hoses, and trash?

GENERAL HOUSEKEEPING. 1. Are all aisles, passageways, stairways and stairwells kept clear of tools, hoses, and trash? Inspection Checklist GENERAL HOUSEKEEPING 1. Are all aisles, passageways, stairways and stairwells kept clear of tools, hoses, and trash? 2. Is oil, grease, or other liquids, when spilled on the floor

More information

North Dakota State University Grounds Maintenance Equipment

North Dakota State University Grounds Maintenance Equipment North Dakota State University Grounds Maintenance Equipment I. Introduction Grounds maintenance equipment is an important part of the work activities on NDSU campus. They can make grounds maintenance jobs

More information

SBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions

SBCNNS. Abrasive Blast Cabinet Assembly & Operating Instructions SBCNNS Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

INSTRUCTION MANUAL ANGLE GRINDER PT W

INSTRUCTION MANUAL ANGLE GRINDER PT W INSTRUCTION MANUAL ANGLE GRINDER PT50360 4½ INCHES 120V 60Hz 600W 5A 12,000 rpm C US Note : Before operating this tool, read this manual and follow all safety rules and operating instructions. This electric

More information

Cordless High Speed Drill

Cordless High Speed Drill ENGLISH Cordless High Speed Drill MODEL 6503D 00039 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

OPERATOR PROTECTIVE EQUIPMENT. Owner s Responsibility

OPERATOR PROTECTIVE EQUIPMENT. Owner s Responsibility CONGRATULATIONS! You have just made the first step toward making your tire changing chores much easier! This DAA Assist Arm assembly guide will help you to assemble and install your new DAA Assist Arm

More information

Owner s Manual. Mortar / Plaster Mixer. Models M785 M1000 M1200

Owner s Manual. Mortar / Plaster Mixer. Models M785 M1000 M1200 Owner s Manual Mortar / Plaster Mixer Models M785 M1000 M1200 Tiger Equipment LLC. 15 Byrd Lane Rocky Mount, VA 24151 Tel: 540-489-7777 Fax: 540-489-7778 www.tigerequip.com 1. PREFACE This manual contains

More information

Operating Instructions. PowerMax. CORDLESS CAULKING GUN Modell: HPS-4C2-10.8V Li-Ion 380ml to 410ml (5:1)Coaxial Cartridges

Operating Instructions. PowerMax. CORDLESS CAULKING GUN Modell: HPS-4C2-10.8V Li-Ion 380ml to 410ml (5:1)Coaxial Cartridges Operating Instructions PowerMax CORDLESS CAULKING GUN Modell: HPS-4C2-10.8V Li-Ion 380ml to 410ml (5:1)Coaxial Cartridges Operational Precautions General Safety Instructions! WARNING 1. Consider work area

More information

18V CORDLESS GREASE GUN. (Tube Grease Is Not Including)

18V CORDLESS GREASE GUN. (Tube Grease Is Not Including) 8V GREASE GUN 8V CORDLESS GREASE GUN (Tube Grease Is Not Including) ' PRODUCT SPECIFICATION Charger Input Power Battery Output Power - Battery Capacity Battery Pack Charge Time Maximum Operating Pressure

More information

SAFETY RULES SPECIFICATIONS READ ALL INSTRUCTIONS BEFORE OPERATING SAVE THESE INSTRUCTIONS

SAFETY RULES SPECIFICATIONS READ ALL INSTRUCTIONS BEFORE OPERATING SAVE THESE INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE OPERATING SAVE THESE INSTRUCTIONS Thank you for purchasing 7" Polisher. Before attempting to operate your new Polisher please read these instructions thoroughly. You will need

More information

Installation Instructions

Installation Instructions Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to

More information

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A

DISPLACEMENT PUMP INSTRUCTIONS-PARTS LIST Rev. K. Model , Series A Model , Series B Model , Series A INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. DISPLACEMENT PUMP 308190 Rev. K 3000 psi (210 bar) MAXIMUM WORKING PRESSURE Model

More information

AIR PAINT SHAKER OWNER'S MANUAL

AIR PAINT SHAKER OWNER'S MANUAL AIR PAINT SHAKER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

NILFISK BA 500 Service Manual

NILFISK BA 500 Service Manual NILFISK BA 500 Service Manual Model 66324400 12/94 Form Number 043023 TABLE OF CONTENTS Batteries...21 Brush Drive Belt Adjustment Or Replacement...7 Brush Drive Motor - Carbon brush Inspection... 8 Brush

More information

14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS

14.4 CORDLESS DRILL ASSEMBLY AND OPERATING INSTRUCTIONS 14.4 CORDLESS DRILL 40209 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2002 by Harbor Freight Tools. All

More information

1200W CaR PoliSheR en RS4900

1200W CaR PoliSheR en RS4900 1200W Car Polisher RS4900 RS4900 8 1 2 7 3 4 5 6 A B flat nozzle C D E F 1200W Car Polisher RS4900 G H flat nozzle I J K L 4 1200W Car Polisher COMPONT LIST 1 2 3 4 5 6 7 Variable speed control Switch

More information

Model: SPTOGT01 TRACTOR PTO GENERATOR

Model: SPTOGT01 TRACTOR PTO GENERATOR www.scintex.com.au sales@scintex.com.au Model: SPTOGT01 TRACTOR PTO GENERATOR SET UP, OPERATING, AND SERVICING INSTRUCTIONS Read this material before using this product. Failure to do so can result in

More information

ECSS. Electric Chain Saw Chain Sharpener Assembly & Operating Instructions

ECSS. Electric Chain Saw Chain Sharpener Assembly & Operating Instructions ECSS Electric Chain Saw Chain Sharpener Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides

More information

Maintenance and Repair

Maintenance and Repair Maintenance and Repair WARNING ALWAYS shut off the engine, remove key from ignition, make sure the engine is cool, and disconnect the spark plug and positive battery terminal from the battery before cleaning,

More information

24V LITHIUM-ION CORDLESS BLOWER

24V LITHIUM-ION CORDLESS BLOWER 24V LITHIUM-ION CORDLESS BLOWER 24122 Owner s Manual TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757) www.greenworkstools.com Read all safety rules and instructions carefully before operating this tool.

More information

Disc Grinder Model G 18MR G 23MR G 23MRU

Disc Grinder Model G 18MR G 23MR G 23MRU Disc Grinder Model G 18MR G 23MR G 23MRU Handling instructions G23MR NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation.

More information

SIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions

SIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions SIP Direct Drive Oil-Lube Air Compressors - Operating & Maintenance Instructions Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.

More information

Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and

Operator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and Operator Manual This operator manual has information for all models of series B plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important

More information

Installation Instructions

Installation Instructions SLP GM/Chevrolet LS3 COIL COVER KIT 2010+ Camaro 5.3L/6.2L 2007+ GMT900 5.3L/6.2L PN: 620038 Installation Instructions Important Notes: Before installing your SLP Coil Cover Kit, please read the installation

More information

Operator s Manual and Part s List Model G-75 Belt Grinder

Operator s Manual and Part s List Model G-75 Belt Grinder Operator s Manual and Part s List Model G-75 Belt Grinder Serial No: Date Purchased: DAKE Division of JSJ 724 Robbins Road Grand Haven, MI 49417 Phone: 1-800-937-3253 616-842-7110 Fax: 1-800-846-3253 616-842-0859

More information

3/8 CORDLESS DRILL with DRIVER 19.2 VOLT

3/8 CORDLESS DRILL with DRIVER 19.2 VOLT 3/8 CORDLESS DRILL with DRIVER 19.2 VOLT Model 93142 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ

More information

Installation Operation Parts

Installation Operation Parts OWNER S MANUAL BATTERY BACKUP SUMP Installation Operation Parts For further operating, installation or maintenance assistance, Call 98-8-05 PRINTED IN U.S.A. M-8 (/9) RULES FOR SAFE INSTALLATION AND OPERATION

More information

18V Cordless Chain Saw INSTRUCTION MANUAL

18V Cordless Chain Saw INSTRUCTION MANUAL 18V Cordless Chain Saw INSTRUCTION MANUAL WARNING: Read and understand RULES FOR SAFE OPERATION and instructions carefully before operating. Failure to follow the safety rules and other basic safety precautions

More information

Brake Fluid Exchange

Brake Fluid Exchange Brake Fluid Exchange OJT / Practice DTOG Proficiency Exam Date: Trainee: Trainer: Service Center: Brake Fluid Exchange 1. Prepare for service Wear proper Personal Protective Equipment Recommended PPE:

More information

POWER INVERTER 700 WATT / 1800 WATT PEAK

POWER INVERTER 700 WATT / 1800 WATT PEAK POWER INVERTER 700 WATT / 1800 WATT PEAK 91848 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,

More information

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER

BENCH GRINDER WITH LIGHT AND WHEEL DRESSER BENCH GRINDER WITH LIGHT AND WHEEL DRESSER MODEL NO: CBG6250L PART NO: 6500524 OPERATION & MAINTENANCE INSTRUCTIONS LS0811 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder with light and

More information

Raptor Tie Rods Kit Installation Guide Rev X2

Raptor Tie Rods Kit Installation Guide Rev X2 Raptor Tie Rods Kit Installation Guide Rev X2 Sales: 949-212-7911 Tech Support: 949-444-3213 Install Videos: YouTube "Raptor Performance Group" COMPLETELY READ INSTALLATION INSTRUCTIONS PRIOR TO INSTALLING

More information

7 Inch Angle Grinder

7 Inch Angle Grinder 7 Inch Angle Grinder Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Raptor "Race 1.5" Upper Control Arm Kit! Installation Guide! Rev 1B! Sales: ext 1! Tech Support: ext 2! Vista Grande!

Raptor Race 1.5 Upper Control Arm Kit! Installation Guide! Rev 1B! Sales: ext 1! Tech Support: ext 2! Vista Grande! Raptor "Race 1.5" Upper Control Arm Kit Installation Guide Rev 1B Sales: 866-691-7750 ext 1 Tech Support: 866-691-7750 ext 2 23231 Vista Grande Laguna Hills, CA 92653 Install Videos: YouTube "Raptor Performance

More information

ORIGINAL INSTRUCTIONS

ORIGINAL INSTRUCTIONS OPERATION & MAINTENANCE INSTRUCTIONS CBB200 Shown here BUFFER/POLISHER MODEL NO: CBB150, CBB200 PART NO: 6500485, 6500490 ORIGINAL INSTRUCTIONS LS0818 - ISS 1 INTRODUCTION Thank you for purchasing this

More information

Abrasive Blast Cabinet Assembly & Operating Instructions

Abrasive Blast Cabinet Assembly & Operating Instructions 3951103 Abrasive Blast Cabinet Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important

More information

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL

4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL CSD-4107BG 4V LITHIUM-ION SCREWDRIVER OWNER S OPERATING MANUAL Your screwdriver has been engineered and manufactured to our high standard for dependability, ease of operation, and operator safety. When

More information

Air-Operated Waste Oil Drainer

Air-Operated Waste Oil Drainer Air-Operated Waste Oil Drainer 20-Gallon Tank Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill FD0 008796 ENGLISH (Original instructions) SPECIFICATIONS Model FD0 Steel 0 mm (3/8") Capacities Wood 2 mm (3/6") Wood screw 5. mm x 63 mm (7/32" X 2-/2") Machine

More information

POWER INVERTER 1,000 WATT / 2,000 WATT PEAK

POWER INVERTER 1,000 WATT / 2,000 WATT PEAK POWER INVERTER 1,000 WATT / 2,000 WATT PEAK 94009 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS

More information

SB20G. Large Pressurized Abrasive Blaster Assembly & Operating Instructions

SB20G. Large Pressurized Abrasive Blaster Assembly & Operating Instructions SB20G Large Pressurized Abrasive Blaster Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides

More information

EC DECLARATION OF CONFORMITY

EC DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY 14 2500W INVERTER GENERATOR IM2500I CERTIFICATE OF GUARANTEE This product is guaranteed for a period of 1 Year, with effect from the date of purchase and applies only to the

More information

The Sands Mechanical Museum

The Sands Mechanical Museum The Sands Mechanical Museum How to Change Your Oil It is more difficult to change the oil in a Lotus Elise because the oil plug and filter are difficult to access. They are located behind an access panel.

More information

BENCH GRINDER WITH WIRE BRUSH WHEEL, LIGHT AND WHEEL DRESSER MODEL NO: CBG6250LW

BENCH GRINDER WITH WIRE BRUSH WHEEL, LIGHT AND WHEEL DRESSER MODEL NO: CBG6250LW BENCH GRINDER WITH WIRE BRUSH WHEEL, LIGHT AND WHEEL DRESSER MODEL NO: CBG6250LW PART NO: 6500526 OPERATION & MAINTENANCE INSTRUCTIONS LS0514 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder

More information

STEEL SIDE PANEL KIT. Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER)

STEEL SIDE PANEL KIT. Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER) STEEL SIDE PANEL KIT Model 47423 (FOR USE WITH MODEL 42709 FOLDABLE UTILITY TRAILER) Set up and Operating Instructions (MODEL 42709 TRAILER and TARP NOT INCLUDED. TARP SOLD SEPARATELY. Shown for illustration

More information

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool

RMT1201. ORIGINAL INSTRUCTIONS Cordless Multi-Tool RMT1201 ORIGINAL INSTRUCTIONS Cordless Multi-Tool Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety GENERAL

More information

***THE OWNER'S MANUAL MUST BE GIVEN TO THE END USE CUSTOMER AFTER COMPLETING THE INSTALLATION.***

***THE OWNER'S MANUAL MUST BE GIVEN TO THE END USE CUSTOMER AFTER COMPLETING THE INSTALLATION.*** INSTALLATION INSTRUCTIONS FOR THE MOTOR TRIKE HARLEY MECHANICAL REVERSE 1999-2006 FIVE SPEED FLH LAST UPDATED: OCTOBER 2011 AS THE INSTALLER OF THIS MECHANICAL REVERSE, YOU MUST BECOME FAMILIAR WITH PROPER

More information

Trike Conversion Installation Guide Kawasaki Vulcan 900 Classic, Classic LT, and Custom Models 2007 and Up Solid Axle Suspension

Trike Conversion Installation Guide Kawasaki Vulcan 900 Classic, Classic LT, and Custom Models 2007 and Up Solid Axle Suspension Trike Conversion Installation Guide Kawasaki Vulcan 900 Classic, Classic LT, and Custom Models 2007 and Up Solid Axle Suspension CAUTION: -Failure to make the proper adjustments will potentially lead to

More information

Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations

Operator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations M S E R I E Operator Manual S This operator manual has information for all models of series M plus some options and accessories. Some of the illustrations and information may not The most apply to your

More information

BENCH GRINDER MODEL NO: CBG6250

BENCH GRINDER MODEL NO: CBG6250 CBG6250 Bench Grinder.fm Page 1 Thursday, November 10, 2011 3:26 PM BENCH GRINDER MODEL NO: CBG6250 PART NO: 6500522 OPERATION & MAINTENANCE INSTRUCTIONS LS1111 CBG6250 Bench Grinder.fm Page 2 Thursday,

More information

60V RECHARGEABLE LITHIUM-ION BATTERY

60V RECHARGEABLE LITHIUM-ION BATTERY 60V RECHARGEABLE LITHIUM-ION BATTERY LB60A00/LB60A03/LB60A01/LB60A02 Owner s Manual TOLL-FREE HELPLINE: 1-855-345-3934 www.greenworkstools.com Read all safety rules and instructions carefully before operating

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill MT064 MT065 003947 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT064 MT065 Steel 0 mm 3 mm Capacities Wood 25 mm 28 mm Wood

More information

1. CONDITIONS FOR USE 2. SAFETY

1. CONDITIONS FOR USE 2. SAFETY 1. CONDITIONS FOR USE This micro abrasive blaster may only be operated: Indoors; Below 6500 ft above sea level altitude; Ambient air temperature between 40-105 F (5-40 C); Maximum relative humidity of

More information

T1-Titanium Non-HVLP Spray Gun

T1-Titanium Non-HVLP Spray Gun T1-Titanium Non-HVLP Spray Gun THE SPRAY GUN PEOPLE FOR PRODUCT INFORMATION CALL: 1-800-742-7731 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

More information

440/880LB ELECTRIC HOIST STF-4488EH

440/880LB ELECTRIC HOIST STF-4488EH ELECTRIC HOIST 440/880LB WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

Replacing the Batteries in the Fortress LI 660

Replacing the Batteries in the Fortress LI 660 Replacing the Batteries in the Fortress LI 660 This FTS describes how to replace the batteries in Fortress LI 660 units. Batteries should be replaced by a qualified technician. If you have any questions

More information

INSTALLATION MANUAL SWS

INSTALLATION MANUAL SWS INSTALLATION MANUAL SWS 30-30 Gallon Auxiliary Tank FOR RVB1500, 2000, 2500 SPREADERS Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, MegaBlade, V-Wing,

More information

Gen 2 Raptor Adjustable Spring Perch Collar Installation Guide Rev X1

Gen 2 Raptor Adjustable Spring Perch Collar Installation Guide Rev X1 Gen 2 Raptor Adjustable Spring Perch Collar Installation Guide Rev X1 Tech Support: 866-691-7750 ext 2 Install Videos: YouTube "Raptor Performance Group" COMPLETELY READ INSTALLATION INSTRUCTIONS PRIOR

More information

1. CONDITIONS FOR USE 2. SAFETY

1. CONDITIONS FOR USE 2. SAFETY 1. CONDITIONS FOR USE This micro abrasive blaster may only be operated: Indoors; Below 6500 ft above sea level altitude; Ambient air temperature between 40-105 F (5-40 C); Maximum relative humidity of

More information

SUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS

SUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS SUBMERSIBLE PUMP Model 37952 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.

More information

19.2V CORDLESS 2-IN-I COMBO KIT OWNER'S MANUAL

19.2V CORDLESS 2-IN-I COMBO KIT OWNER'S MANUAL 19.2V CORDLESS 2-IN-I COMBO KIT OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

Replacement Front Outer Tie Rod End (85-93 All)

Replacement Front Outer Tie Rod End (85-93 All) Replacement Front Outer Tie Rod End (85-93 All) Materials in the box: One outer tie rod end, castle nut, cotter pin, nut, and grease fitting. Tools Needed: Jack and Jack Stands Pry bar (you may or may

More information

Trike Conversion Installation Guide for Indian Scout Motorcycles 2016 & Up Revision 2

Trike Conversion Installation Guide for Indian Scout Motorcycles 2016 & Up Revision 2 Trike Conversion Installation Guide for Indian Scout Motorcycles 2016 & Up Revision 2 Warning - This product was not intended for more than one rider. Weight limit on this product has been set at 400 lbs.

More information

MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL

MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL DO NOT THROW AWAY IMPORTANT MANUAL MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL Operators Manual GROUND HOG, INC. P.O.BOX 290 San Bernardino, CA. 92402 Phone (909) 478-5700 Fax (909) 478-5710 E-mail:

More information

Model: SE-4020-CA Automatic Battery Charger

Model: SE-4020-CA Automatic Battery Charger OWNERS MANUAL Model: SE-4020-CA Automatic Battery Charger PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH USE. This manual will explain how to use the battery charger safely and effectively. Please

More information

PRODUCT MANUAL TILE CUTTING MACHINE. . Operation. Parts List and Diagram SPECIFICATIONS CAUTION:

PRODUCT MANUAL TILE CUTTING MACHINE. . Operation. Parts List and Diagram SPECIFICATIONS CAUTION: FLORCRAFTT TM PRODUCT MANUAL SKU NUMBER 709-4242 SERIAL NUMBER: CAUTION: FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL COMPLETELY AND CAREFULLY BEFORE OPERATING THIS 7 TILECUTTING MACHINE SPECIFICATIONS

More information

INSTRUCTION MANUAL. Cordless Angle Drill XAD01

INSTRUCTION MANUAL. Cordless Angle Drill XAD01 INSTRUCTION MANUAL Cordless Angle Drill XAD0 0474 ENGLISH (Original instructions) SPECIFICATIONS Model XAD0 Capacities Steel 0 mm (3/8") Wood 25 mm (") No load speed (RPM) 0 -,800 /min Overall length 34

More information

6 x 10 Belt Disc Sander

6 x 10 Belt Disc Sander 6 x 10 Belt Disc Sander FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500400 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT

More information

BEARING ADAPTERS FWD/FRONT WHEEL. Model 45210

BEARING ADAPTERS FWD/FRONT WHEEL. Model 45210 BEARING ADAPTERS FWD/FRONT WHEEL Model 45210 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

7 Piece Car Polishing Kit

7 Piece Car Polishing Kit 7 Piece Car Polishing Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Systems Repair Worksheet Chapter 6 Pages Working Safely in the Shop 52 Points. Be Certain to Read the Summary

Systems Repair Worksheet Chapter 6 Pages Working Safely in the Shop 52 Points. Be Certain to Read the Summary Systems Repair Worksheet Chapter 6 Pages 134-152 Working Safely in the Shop 52 Points Be Certain to Read the Summary 1. In an automotive repair shop, there is great potential for serious, simply because

More information

PS Inch (177.8mm) Polisher / Sander Assembly & Operating Instructions

PS Inch (177.8mm) Polisher / Sander Assembly & Operating Instructions PS07401 7-Inch (177.8mm) Polisher / Sander Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation

More information

OPERATOR S MANUAL SINGLE PORT UNIVERSAL CAR CHARGER

OPERATOR S MANUAL SINGLE PORT UNIVERSAL CAR CHARGER OPERATOR S MANUAL SINGLE PORT UNIVERSAL CAR CHARGER P130 Fits Ryobi 7.2 volt-18 volt battery packs BATTERIES SOLD SEPARATELY Your battery charger has been engineered and manufactured to Ryobi s high standard

More information

BENCH GRINDER WITH LIGHT AND WIRE WHEEL MODEL NO: CBG8370LW

BENCH GRINDER WITH LIGHT AND WIRE WHEEL MODEL NO: CBG8370LW BENCH GRINDER WITH LIGHT AND WIRE WHEEL MODEL NO: CBG8370LW PART NO: 6500533 OPERATION & MAINTENANCE INSTRUCTIONS LS0514 INTRODUCTION Thank you for purchasing this CLARKE Bench Grinder with light and wire

More information

LPE C5 Battery Relocation Kit

LPE C5 Battery Relocation Kit LPE C5 Battery Relocation Kit The LPE C5 Corvette battery relocation kit improves vehicle weight distribution by moving weight to the rear of the vehicle. The improved weight distribution increases traction

More information

& OPERATING INSTRUCTIONS

& OPERATING INSTRUCTIONS ELECTRIC WINCH 12 / 24 VOLT DC DW5000 (5000LBs/2272Kg) DW6000 (6500LBs/2727Kg) DW8000 (8000LBs/3663Kg) DW8500 (8500LBs/3863Kg) DW9000 (9000LBs/4091Kg) ASSEMBLY & OPERATING INSTRUCTIONS DW5000 Specification

More information

Cordless Driver Drill

Cordless Driver Drill ENGLISH (Original instructions) INSTRUCTION MANUAL Cordless Driver Drill 607D 637D 6337D 6347D 0089 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 607D 637D 6337D 6347D

More information

D Instructions/Parts. Siphon Feed Detail Spray Gun D

D Instructions/Parts. Siphon Feed Detail Spray Gun D Instructions/Parts D-5-55 Siphon Feed Detail Spray Gun FOR PRODUCT INFORMATION CALL: 1-800-742-7731 309991D Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions.

More information

VEHICLE MECHANICS SAFETY RULES, POLICIES, AND PROCEDURES

VEHICLE MECHANICS SAFETY RULES, POLICIES, AND PROCEDURES VEHICLE MECHANICS SAFETY RULES, POLICIES, AND PROCEDURES The following sections provide general guidelines and requirements for vehicle maintenance safety and have been prepared to assist you based on

More information

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D

OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D OIL COOLER KIT INSTALLATION INSTRUCTIONS PART NUMBER D570-0907 APPLICATION: 2011-12 E90 335i/xi (N55 engine) with BMW M-Technic bumper and without stock oil cooler Congratulations for being selective enough

More information

Subject to change. USERS MANUAL Art.nr. CDM6026 PCD-2400I. NiCd

Subject to change. USERS MANUAL Art.nr. CDM6026 PCD-2400I. NiCd UK Subject to change UK USERS MANUAL Art.nr. CDM02 PCD-2400I NiCd 040-2 4 1 2 4 R L EXPLODED VIEW 3 Fig. A Fig. D B 1 2 Fig. B Fig. E 3 10 11 SPARE PARTS LIST PCD-2400I A Fig. C 3 Fig. F REF NR DESCRIPTION

More information

Detroit Tuned R56 Oil Service How-To

Detroit Tuned R56 Oil Service How-To Detroit Tuned R56 Oil Service How-To Welcome to Detroit Tuned s how-to guide for an oil service for an R56 MINI Cooper. It s always best to do an oil change on a hot engine as the hot oil will drain better

More information

Log Splitter. Owner/Operator Manual. Models HCWP1-26

Log Splitter. Owner/Operator Manual. Models HCWP1-26 Log Splitter Owner/Operator Manual Models HCWP1-26 SAFETY..........................2 SAFETY WARNING SYMBOL.........3 SAFETY RULES.................. 4-5 SPECIFICATIONS................. 6 CONTROLS AND FEATURES.......

More information

MGFHVLP. Instructions/Parts. Mini Gravity Feed System E. Part No Includes MGFHVLP Mini Gravity Feed Spray Gun and MGC 125 Gravity Cup.

MGFHVLP. Instructions/Parts. Mini Gravity Feed System E. Part No Includes MGFHVLP Mini Gravity Feed Spray Gun and MGC 125 Gravity Cup. Instructions/Parts MGFHVLP Mini Gravity Feed System FOR PRODUCT INFORMATION CALL: 1-800-742-7731 309989E For gravity feed spraying of automotive colors and clears. Ideal for touch-up and detail work. Important

More information

Cordless Driver Drill

Cordless Driver Drill INSTRUCTION MANUAL Cordless Driver Drill XFD0 0360 ENGLISH (Original instructions) SPECIFICATIONS Model XFD0 Steel 3 mm (/") Capacities Wood 38 mm (-/") Wood screw 0 mm x 89 mm (3/8" X 3-/") Machine screw

More information

OWNER S MANUAL TOLL-FREE HELPLINE: (Monday - Friday / 8am - 4:30pm CST)

OWNER S MANUAL TOLL-FREE HELPLINE: (Monday - Friday / 8am - 4:30pm CST) LITHIUM ION BATTERY OWNER S MANUAL TOLL-FREE HELPLINE: 1-877-572-7278 (Monday - Friday / 8am - 4:30pm CST) READ ALL SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATING STRIKEMASTER LITHIUM 40v BATTERY

More information

Electric Chainsaw Sharpener With Bar Mount

Electric Chainsaw Sharpener With Bar Mount Electric Chainsaw Sharpener With Bar Mount Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic

More information

Hose Reel Kit for Workman 200 Spray Systems. Installation Instructions. Form No Rev A. Model No Serial No.

Hose Reel Kit for Workman 200 Spray Systems. Installation Instructions. Form No Rev A. Model No Serial No. Hose Reel Kit for Workman 00 Spray Systems Model No. 097 Serial No. 000000 and Up Form No. 5- Rev A Installation Instructions Installation Important You will need to purchase Teflon tape before installing

More information

Angle Grinder Holder

Angle Grinder Holder Angle Grinder Holder Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Honda Civic Oil Change

Honda Civic Oil Change 1988-1991 Honda Civic Oil Change Change the oil in your '88-'91 Honda Civic to improve engine performance and longevity. Written By: Phillip Takahashi ifixit CC BY-NC-SA www.ifixit.com Page 1 of 13 INTRODUCTION

More information

PROPANE TORCH WITH TURBO BURNER

PROPANE TORCH WITH TURBO BURNER PROPANE TORCH WITH TURBO BURNER MODEL 91894 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY,

More information

Package Contents Part A (3) I-Beam (1) Base (2) Other parts

Package Contents Part A (3) I-Beam (1) Base (2) Other parts Page 1 Installation Instructions for 81245 Adjustable Height Gantry Crane 1-Ton Capacity Table of Contents Important Safety Information pg. 2 Specific Operation Warnings pg. 2 Main Parts of Product pg.

More information

New Bremen, Ohio USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A.

New Bremen, Ohio USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A. New Bremen, Ohio 45869 USA 2004 PF14387-WEB Rev. 6/06 Printed in U.S.A. You Must be Trained It s the law, you must be trained and certified to operate this truck. (OSHA 1910.178, Rev. 1999) You or others

More information

ASBURY PARK PRESS SEPTEMBER 26, 2009

ASBURY PARK PRESS SEPTEMBER 26, 2009 ASBURY PARK PRESS SEPTEMBER 26, 2009 LOT DESCRIPTION VIN VEHICLES 1 1999 CHEVY MALIBU, MILEAGE: 161,000 1G1LD5548SY245328 2 2001 DODGE CARGO VAN, MILEAGE: 167,000 2B7KB31Y91K547437 3 1998 CHEVY MALIBU,

More information

Trike Conversion Installation Guide for Harley-Davidson Sportster Motorcycles 2004 & Up Revision 7

Trike Conversion Installation Guide for Harley-Davidson Sportster Motorcycles 2004 & Up Revision 7 Trike Conversion Installation Guide for Harley-Davidson Sportster Motorcycles 2004 & Up Revision 7 CAUTION : Failure to follow these instructions can lead to serious personal injury and/or property damage

More information