Grand Sierra - Ariens GT Rotary Mowers Owner/Operator & Parts Manual

Size: px
Start display at page:

Download "Grand Sierra - Ariens GT Rotary Mowers Owner/Operator & Parts Manual"

Transcription

1 Grand Sierra - Ariens GT Rotary Mowers Owner/Operator & Parts Manual Models RM RM A 12/03 Supersedes Printed in USA

2 CONTROLS AND FEATURES 1. Drive Shaft Assembly 2. Deflector 3. Spring Latch 4. Lift Link 5. Left Blade 6. Skid Shoes 7. Rollers 8. Height Control Lever 9. Right Blade 10. Quadrant 11. Gear Box 12. Center Blade 13. Mower Hanger 14. Hydraulic Lift Lever Figure 1 2

3 TABLE OF CONTENTS Controls and Features Service and Adjustments Introduction Storage Safety Troubleshooting Assembly Warranty Operation Parts List Maintenance INTRODUCTION THE MANUAL Before operation of unit, carefully and completely read your manuals. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. All reference to left, right, front, or rear are given from operator sitting in operation position and facing the direction of forward travel. MODEL AND SERIAL NUMBERS Transfer model & serial number label from product registration here. When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit. Numbers are located on the product registration form in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Attachment Model and Serial numbers here. UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. DISCLAIMER Ariens reserves the right to discontinue, make changes to, and add improvements upon its products at any time without public notice or obligation. The descriptions and specifications contained in this manual were in effect at printing. Equipment described within this manual may be optional. Some illustrations may not be applicable to your unit. PRODUCT REGISTRATION The Ariens dealer must register the product at the time of purchase. Registering the product will help the company process warranty claims or contact you with the latest service information. All claims meeting requirements during the limited warranty period will be honored, whether or not the product registration card is returned. Keep a proof of purchase if you do not register your unit. Customer Note: If the dealer does not register your product, please fill out, sign, and return the product registration card to Ariens or go to DELIVERY Customer Note: If you have purchased this product without complete assembly and instruction by your retailer, it is your responsibility to: 1. Read and understand all assembly instructions in this manual. If you do not understand or have difficulty following the instructions, contact your nearest Ariens Dealer for assistance. Make sure all assembly has been properly completed and safety interlock system works properly. NOTE: To locate your nearest Ariens Dealer, call or go to on the internet. WARNING: Improper assembly or adjustments can cause serious injury. 2. Understand all Safety Precautions provided in the manuals. 3. Review control functions and operation of the unit. Do not operate unit unless all controls function as described in this manual. 4. Review recommended lubrication, maintenance and adjustments. 5. Fill out Original Purchaser Registration Card and return the card to Ariens. GB Ariens Company

4 SAFETY SAFETY ALERTS Look for these symbols to point out important safety precautions. They mean: Attention! Personal Safety Is Involved! Become Alert! Obey The Message! The safety alert symbols above and signal words below are used on decals and in this manual. Read and understand all safety messages. DANGER: IMMINENTLY HAZARDOUS SITUATION! If not avoided, WILL RESULT in death or serious injury. WARNING: POTENTIALLY HAZARDOUS SITUATION! If not avoided, COULD RESULT in death or serious injury. CAUTION: POTENTIALLY HAZARDOUS SITUATION! If not avoided, MAY RESULT in minor or moderate injury. It may also be used to alert against unsafe practices. NOTATIONS NOTE: General reference information for proper operation and maintenance practices. IMPORTANT: Specific procedures or information required to prevent damage to unit or attachment. PRACTICES AND LAWS Practice usual and customary safe working precautions, for the benefit of yourself and others. Understand and follow all safety messages. Be alert to unsafe conditions and the possibility of minor, moderate, or serious injury or death. Learn applicable rules and laws in your area. Always follow the practices set forth in this manual. REQUIRED OPERATOR TRAINING Original purchaser of this unit was instructed by the seller on safe and proper operation by the seller. If unit is to be used by someone other than original purchaser; loaned, rented or sold, ALWAYS provide this manual and any needed safety training before operation. SAFETY DECALS AND LOCATIONS ALWAYS replace missing or damaged Safety Decals. Refer to figure below for Safety Decal locations B 1 WARNING/AVERTISSEMENT/ADVERTENCIA Do not operate mower unless guards are in operating position or bagger is attached. Ne jamais utiliser No operar segadora a la tondeuse sans menos que las defensas protecteur sur le esten en posicion de canal d'ejection ou operacion o el sans le bac monte. recogedor este fijo. 1 DANGER/PELIGRO D Figure 2 OTt1683 GB - 4

5 1. DANGER! ROTATING PARTS OL3030 OL0910 OL3292 OL4010 OL4420 Always keep feet and hands away from rotating parts. Always stand clear of discharge area. Do not direct discharge toward other people. Keep people away from unit while operating. Shut off engine, remove key, read manual before you adjust or repair unit. Never carry passengers. NO STEP! Always keep feet away from rotating parts. 2. WARNING! Do not operate mower unless guards are in operating position or bagger is attached. Always stand clear of discharge area. OL4430 OL3320 Do not operate mower unless bagger is attached or guards are in operating position. ASSEMBLY SAFETY RULES Read, understand, and follow all safety practices in Owner/Operator Manual before beginning assembly. Failure to follow instructions could result in personal injury and/or damage to unit. ALWAYS remove key and/or wire from spark plug before assembly. Unintentional engine start up can cause death or serious injury. OPERATIONAL SAFETY RULES Walk Around Inspection Complete a walk around inspection of unit and work area to understand: Work area Your unit All safety decals Work Area ALWAYS check overhead and side clearances carefully before operation. ALWAYS be aware of traffic when operating along streets or curbs. Keep children and people away. Stop the machine is anyone enters your work area. Keep children out of work area and under watchful care of a responsible adult. Keep area of operation clear of all toys, pets, and debris. Thrown objects can cause injury. Tall grass can hide obstacles. Check for weak spots on dock, ramps or floors. Avoid uneven work areas and rough terrain. Stay alert for holes, roots and other hidden hazards. Avoid uneven and rough terrain. DO NOT operate near drop offs, ditches, or embankments. Unit can suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in. Personal Safety Only trained adults may operate unit. Training includes actual operation. NEVER allow children to operate or play on or near unit. Be alert and shut off unit if children enter area. NEVER operate unit after or during the use of medication, drugs or alcohol. Safe operation requires your complete and unimpaired attention at all times. DO NOT wear loose clothing or jewelry and tie back hair that may get caught in rotating parts. Wear adequate outer garments. NEVER wear open sandals or canvas shoes during operation. Wear adequate safety gear, protective gloves and footwear. Wear proper footwear to improve footing on slippery surfaces. Always wear safety goggles or safety glasses with side shields when operating mower. Moving parts can cut or amputate fingers or a hand. Wrap blade(s) or wear gloves to service. On multi-blade mowers, rotation of one blade will cause all blades to rotate. NEVER place your hands or any part of your body or clothing inside or near any moving part while unit is running. ALWAYS keep hands and feet away from all rotating parts during operation. Rotating parts can cut off body parts. ALWAYS keep body and hands away from pin holes or nozzles which eject hydraulic fluid under pressure. DO NOT touch parts which are hot. Allow parts to cool. ALWAYS keep hands and feet away from all pinch points. Fumes from the engine exhaust can cause death or serious injury. DO NOT run engine in an enclosed area. Always provide good ventilation. GB - 5

6 Operation Understand: How to operate all controls The functions of all controls How to STOP in an Emergency Turning radius and clearances Keep safety devices or guards in place and functioning properly. NEVER modify or remove safety devices. Ensure Safety Interlock System on tractor is functioning properly. DO NOT operate unit if safety interlock is damaged or disabled. Check operation of safety system frequently. Before starting engine: disengage PTO, place shift lever in neutral, lower attachment and set parking brake. Dust, smoke, fog, etc. can reduce vision and cause an accident. Mow only in daylight or good artificial light. Avoid slippery surfaces. Always be sure of your footing. DO NOT mow on wet grass. Reduced traction could cause sliding. Never carry passengers. DO NOT try to stabilize the machine by putting your foot on the ground. Never direct discharge towards persons or property that may be injured or damaged by thrown objects. Use extreme caution on gravel surfaces. Stay alert for hidden hazards or traffic. Always stand clear of the discharge area. ALWAYS disengage PTO, stop unit and engine, remove key, engage parking brake and allow moving parts to stop before leaving operator s position. DO NOT operate at too fast a rate. DO NOT change engine governor settings or over-speed engine. Slow down before turning. Use extreme caution when approaching blind corners, shrubs, trees or other objects that may obscure vision. DO NOT operate in reverse unless absolutely necessary. ALWAYS look down and behind before and while backing. If equipment vibrates abnormally, stop engine at once, wait for moving parts to stop and remove wire from spark plug. Repair any damage before restarting unit. Take all possible precautions when leaving unit unattended. Shut off engine. Remove wire from spark plug and secure it away from spark plug. ALWAYS remove key to prevent unauthorized use. Know the weight of loads. Limit loads to those you can safely control and the unit can safely handle. Disengage PTO when attachment is not in use. ALWAYS turn off power to attachment when travelling, crossing driveways, etc. Hazardous Slopes Mow up and down slopes, not across them. Do not operate on slopes over 10. Keep all movements on the slope slow and gradual. Do not make sudden changes in speed or direction. Avoid starting or stopping on the slope. If tires lose traction, disengage the blades and proceed slowly straight down the slope. If you cannot back up a slope or you feel uneasy on it, do not mow it. DO NOT park on slopes unless necessary. When parking on slope always chock or block wheels. Always set parking brake. Transport Use extra care when loading or unloading unit onto trailer or truck. Secure unit chassis to transport vehicle. NEVER secure from rods or linkages that could be damaged. DO NOT transport machine while engine is running. ALWAYS turn off power to attachment when transporting. Cleaning Keep unit free of leaves, debris, etc. Clean up oil or fuel spills. MAINTENANCE AND SERVICE SAFETY RULES ALWAYS block wheels and know all jack stands are strong and secure and will hold weight of unit during maintenance. Keep nuts and bolts tight, especially blade attachment bolts, and keep equipment in good condition. NEVER attempt to make any adjustments to unit while engine is running. Stop engine, remove spark plug wire and wait for all moving parts to stop before servicing (except where specifically recommended). ALWAYS maintain unit in safe operating condition. NO smoking, NO sparks, NO flames. Always allow engine to cool before servicing. STORAGE SAFETY RULES For extended storage, clean unit thoroughly. Lower cutting deck unless a positive mechanical lock is used. ACCESSORY AND ATTACHMENT SAFETY RULES Use only attachments or accessories designed for your unit. Check attachment components frequently. If worn or damaged, replace with manufacturer s recommended parts. GB - 6

7 WARNING: AVOID INJURY. Read and understand Assembly Safety Rules before proceeding. Unpack Deck Remove deck and all other components from the shipping container. ASSEMBLY Attaching Deck 1. Swing mower hanger up onto tractor saddle brackets and lower locks and latches. ASSEMBLING AND INSTALLING DECK 1. Place deck on a flat surface large enough to allow you to drive tractor over mower deck. 2. Install discharge chute to deck. 3. Install ramps on deck. Preparing Tractor 1. Place tractor rockshaft arms in float position. 2. Decrease tension on center rockshaft flotation chain. See operator manual. Driving Tractor Over Mower 1. Lock 2. Latch 3. Saddle Bracket 4. Mower Hanger CAUTION: Drive over mower slowly and carefully to avoid any damage. Be prepared to stop as soon as front wheels contact the ground in front of deck. Figure 4 2. Raise height control lever and install pins from channel support arms onto center rock shaft arms on tractor. OTt1550 NOTE: If deck is laying on a smooth surface, it will slide if you attempt to drive over it with tractor. If installing deck on a smooth surface: Find two (2) pieces of rope 6 long. Tie a knot at the end of each rope. Thread a rope through each ramp. Lay ropes straight back from deck. 1. Drive tractor up to deck and align with ramps. 2. Drive tractor up ramps and over deck. 1. Ramps 2. Rivets 3. Mower Hanger Figure 3 4. Height Control Lever 5. Rope 6. Knots OTt Center Rock Shaft Arms 2. Pins 3. Channel Support Arms Figure 5 OTt Apply a light coat of grease to the PTO shaft. 4. Slide PTO yoke into PTO spline shaft. 5. Connect collar on PTO yoke to PTO on tractor. Slide collar back, place on PTO and let collar slide forward to lock. 6. Increase tension on center rockshaft flotation spring. See operator manual. GB - 7

8 Check Function of All Controls Ensure unit runs and performs properly. Refer to Operation. WARNING: Failure of controls could result in death or serious injury. REMOVING DECK For Smooth Surfaces NOTE: If deck is laying on a smooth surface, it will slide if you attempt to drive over it with tractor. If installing deck on a smooth surface: 1. Lay two 10 lengths of rope on the ground. For Normal Surfaces 1. Place height control lever in lowest position. 2. Decrease tension on center rockshaft flotation chain. See operator manual. 3. Disconnect PTO shaft from PTO. 4. Remove pins from channel support arms, and slide arms off of center rock shaft arms. 5. Unlock latches on tractor saddle brackets and swing mower hanger down. 6. Place ramps on front of mower deck. 7. Tie ropes to ramps (if ropes are used). 8. Back up and over deck carefully Lay an 8 board over each rope. Leave 2 of rope extending from front end of boards. 8 Front Drive tractor on boards so front wheels are about a foot past the front end of boards. Do not let front wheels rest on 2 sections of rope. 4. Follow steps below for taking off deck. 1. Ramps 2. Mower Hanger Figure 6 3. Boards 4. Ropes OTt1540 GB - 8

9 WARNING: AVOID INJURY. Read and understand Operational Safety Rules before proceeding. CONTROLS AND FEATURES See Figure on page 2 for all Controls and Features locations. TO STOP IN AN EMERGENCY Turn ignition key to OFF. PRE-START Refer to tractor s owner manual for tractor pre-starting and operation. Transport the equipment to the area to be mowed. IMPORTANT: Place Hydraulic Lift Lever to the raised position when transporting. Set cutting height. See Service and Adjustments. OPERATION ENGAGING MOWER Refer to tractor s owner s manual for tractor starting and shut off. To start mower: 1. Set desired cutting height. 2. Place Hydraulic Lift Lever in the FLOAT position. 3. Place throttle lever at 1/3 speed. 4. Engage PTO. 5. Move the throttle lever to full speed. To disengage mower, disengage PTO. Keep the PTO disengaged when not mowing. OPERATING TIPS Be sure to keep your mower blades sharp. Check pitch and level of mower frequently. If grass is high or contains a high amount of moisture, cut the grass twice. On the first pass, cut grass higher than normal. On the second pass, cut grass at the desired height. Cut grass when it is dry. Plan your cutting pattern to always trim with the left side of the mower. Make slow turns when cutting to prevent scuffing lawn. GB - 9

10 Ariens Dealers will provide any service or adjustments which may be required to keep your unit operating at peak efficiency. Should engine service be required, contact an Ariens dealer or an authorized engine manufacturer's service center. MAINTENANCE WARNING: AVOID INJURY. Read and understand Maintenance and Service Safety Rules before attempting any maintenance. MAINTENANCE SCHEDULE Service Performed Check Fasteners General Lubrication Check Mower Blades Check Deck Belt CHECK FASTENERS Be certain that all hardware is tightened to the proper torque. Pay special attention to mower blades, guards and safety shields. GENERAL LUBRICATION Daily Every 25 hrs. Every 100 hrs. Check lubricant level in gearbox every 25 hours and at the beginning of season. To check and fill: 1. Remove cover on top of gearbox. 2. Check that lubrication is level with center line of input shaft. Fill if necessary. 3. Replace cover. Lubricate all lube fittings and pivot points at the beginning of each season and every 25 hours (Figure 7). IMPORTANT: Wipe each fitting clean before and after lubrication. Apply Stens Mix Hi-Temp Grease or equivalent to the lube fittings. Order P/N: three pack of 3 oz. cartridges. 1. PTO Lube Fitting 2. Gearbox Lubrication Level 3. Grease Idler Pivot Under Plate (60") CHECK MOWER BLADES Check mower blades for wear every 25 hours of operation. Ensure blade hardware is tightened to ft. lbs. (68-81 Nm) of torque. See Service and Adjustments to sharpen blades. CHECK DECK BELT Figure 7 4. Grease Idler Pivot Under Plate (48") 5. Lube Fittings 6. Lube Fitting (60") OTt1600 Check deck belt every 100 hours and every season. Replace if worn or deteriorated. Replace belts to accommodate belt stretch and wear in the traction drive or mower drive. Refer to Service and Adjustments for procedures. GB - 10

11 SERVICE AND ADJUSTMENTS MOWER BLADES WARNING: AVOID INJURY. Read and NOTE: If mower is used under sandy soil conditions, understand Maintenance and Service Safety replace blades when air lifts become eroded through at Rules before attempting any maintenance. ends (Figure 8). SETTING CUTTING HEIGHT To set cutting height: 1. Pull cutting height lever out of slot in quadrant. 2. Place in higher slot to raise cutting height. Place in lower slot to lower cutting height REPLACING MOWER BELT 1. Remove deck from tractor. See Assembly. 2. Remove center blade from deck. 3. Remove left and right belt covers. 4. Pull belt off of right spindle pulley (Figure 9). 5. Remove mounting plate hardware. Note location of shims, idler pivot (48" deck) and spacer for replacement later. 6. Tip mounting plate up and back. 7. Remove belt from center drive pulley, idler and blade pulleys. 8. Install new belt around center drive pulley, spring loaded idler and left hand blade pulley. 9. Reinstall mounting plate. 10. Replace center blade. Install lock washer and nut. Tighten nut to ft. lbs. (68-81 Nm) Cutting Blade 2. Square Corner Figure 8 Sharpen the Mower Blades 3. Air Lift Erosion 4. Air Lift CAUTION: Use sturdy gloves or padding to protect hands when working with mower blades. OT Turn the engine off. Remove the ignition key. Remove the ignition wire from the spark plugs. 2. Remove the jam nut, lock washer and the blades from the spindle shafts. 1. Mounting Plate 2. Mounting Plate Hardware 3. Center Drive Pulley 4. Right Spindle Pulley Figure 9 5. Idler Pulley 6. Left Spindle Pulley 7. Mower Drive Belt OF1630 GB - 11

12 3. Sharpen the beveled edges of the blades in a straight line. Do not change the angle of the beveled edge. If more than 0.5 inches (12.7mm) are removed from the width of a blade, discard the blade. Make sure the sharpened blades are balanced. Balance must be held within 1.3 inch ounces. 4. Put the blades, lock washers, and the jam nuts back on the spindle shafts. 5. Tighten the bolts to ft. lbs. (68-81 Nm) of torque. 6. Put the ignition wires back on the spark plugs. LEVELING THE MOWER DECK Adjust leveling on a flat surface. To check deck level: 1. Loosen nuts on rollers, place rollers in lowest position, and tighten nuts. 2. Raise discharge chute. 3. Measure height of deck at each side. Measurements must be within 1/16" (1.5 mm) of each other. To change deck leveling: 1. Loosen nut on roller on side of mower pan that was higher. 2. Raise roller and tighten nut. 3. Check deck level. Adjust roller again if necessary. 4. Measure distance from ground to rear tip of each blade. 5. The front tips of blades should be 1/8" to 1/4" (3-6mm) lower than rear tips. 1. Front Tip 2. Rear Tip 3. Blade Assembly 4. Center Blade Figure 11 OTt1660 To adjust: 1. Loosen locking nuts on adjustment rod. 2. Tighten adjustment nuts to raise front tips of mower blades. Loosen adjustment nuts to lower front tips of mower blades. IMPORTANT: Turn adjustment nuts on left and right side of decks equally to maintain proper level. 3. Tighten locking nuts. 1. Roller Bracket 2. Slot 3. Lube Fitting 4. Roller 5. Washer 6. Nut Figure 10 OTt1641 ADJUSTING PITCH To check: 1. Place mower blades to run from front to back of deck. 2. Ensure rollers are contacting ground. Lower deck if necessary. 3. Measure distance from ground to front tip of each blade. 1. Yoke 2. Adjustment Rod 3. Adjustment Nut 4. Locking Nut Figure 12 OTt1670 GB - 12

13 WARNING: AVOID INJURY. Read and understand Storage Safety Rules in Safety section before proceeding. SHORT TERM IMPORTANT: NEVER spray unit with water or store unit outdoors. Inspect unit for visible signs of wear, breakage or damage. Keep all nuts, bolts and screws properly tightened and know unit is in safe working condition. STORAGE Store unit in a cool, dry protected area. LONG TERM TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTION Clean unit thoroughly and lubricate (see Maintenance). Touch up all scratched painted surfaces. Remove weight from wheels by putting blocks under frame or axle. When storing unit for extended periods of time, remove all fuel from tank and carburetor (run dry). Refer to engine manual. Clean and charge the battery. Charge battery every three to four weeks when storing unit. Mower won t engage Abnormal vibrations or sounds 1. Attachment blocked. 2. Bad PTO switch. 1. Loose hardware. 2. Debris in mower deck. 3. Mower blades damaged. 4. Mower belt damaged or off pulleys. 1. Stop unit, remove key and clear attachment. 2. Replace switch (see Dealer). 1. Check and tighten all hardware. 2. Clear debris before starting unit. 3. Replace mower blades. 4. Install or replace belt. GB - 13

14 2-Year Limited Warranty Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI Fax Ariens Company warrants to the original purchaser that consumer products manufactured by Ariens Company will be free from defects in material and workmanship for a period of two (2) years after the date of purchase, and will repair any defect in material or workmanship, and repair or replace any defective part, subject to the conditions, limitations and exclusions set forth herein. The two-year duration of this warranty applies only if the product is put to ordinary, reasonable, and usual personal, family, or household uses. If the product is put to any business, commercial, or industrial use such as, but not limited to, commercial landscaping, mowing or snow removal services, or golf course or park maintenance, or agricultural or farmstead use, then the duration of this warranty is ninety (90) days after the date of purchase, or one (1) year after the date of purchase if the product is labeled as a Professional/Commercial Product. If any product is rented or leased, then the duration of this warranty is ninety (90) days after the date of purchase. Genuine Ariens service parts and accessories not purchased with the product covered by this warranty, but which are later purchased and used with that product, are warranted to be free from defects in material and workmanship for a period of ninety (90) days after date of purchase, and Ariens Company will repair or replace any such part or accessory free of charge, except for labor, during that period. This warranty is subject to the following conditions, limitations, and exclusions: This warranty is valid only if the following conditions are met: The purchaser must perform maintenance and minor adjustments explained in the owner s manual. The purchaser must promptly notify Ariens Company or an authorized Ariens service representative of the need for warranty service. Returning the product registration card to Ariens Company will enable the company to contact the registrant with repair or replacement part information. This warranty is subject to the following limitations: The purchaser must transport the product to and from the place of warranty service. Warranty service must be performed by an authorized Ariens service representative. (To find an authorized Ariens service representative, contact Ariens Company at the website, number or address above.) Batteries are warranted only for a period of twelve (12) months after date of purchase, on a prorated basis. For the first ninety (90) days of the warranty period, a defective battery will be replaced free of charge. If the applicable warranty period is more than 90 days, Ariens Company will cover the prorated cost of any defective battery, for up to twelve (12) months after the date of purchase. The following items are not covered by this warranty: Engines and engine accessories are covered only by the warranty made by the engine manufacturer, and are not covered by this warranty. If the product is equipped with a Peerless gearbox and/or transmission, the gearbox and/or transmission are covered only by the warranty made by Peerless, and are not covered by this warranty. If the product is equipped with a Hydro-Gear transmission and/or Hydro-Gear drive components, the Hydro-Gear transmission and/or drive components are covered only by the warranty made by Hydro-Gear, and are not covered by this warranty. Parts that are not genuine Ariens service parts are not covered by this warranty. Shoes, runners, scraper blades, shear bolts, string trimmer height guide, mower blades, mower vanes, trimmer line, headlights, light bulbs are not covered by this warranty. Any defect which is the result of misuse, alteration, improper assembly, improper adjustment, neglect, or accident is not covered by this warranty. Products which were not purchased in the United States, Puerto Rico, or Canada are not covered by this warranty. In all other countries, contact place of purchase. LIMITATION OF REMEDY AND DAMAGES Ariens Company s liability under this warranty, and under any implied warranty that may exist, is limited to repair of any defect in workmanship, and repair or replacement of any defective part. Ariens Company shall not be liable for incidental, special, or consequential damages (including lost profits). Some states do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to you. DISCLAIMER OF FURTHER WARRANTY Ariens Company makes no warranty, express or implied, other than what is expressly made in this warranty. If the law of your state provides that an implied warranty of merchantability, or an implied warranty of fitness for particular purpose, or any other implied warranty, applies to Ariens Company, then any such implied warranty is limited to the duration of this warranty. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Form: ALW GB - 14

15 DECALS Model , Item Part No. Qty. Description Decal, Width of Cut Decal, Mower Pan Head Danger Decal, Warning Decal, Decal, 60 15

16 16 60 MOWER Model OT * 49* * 46* 47* 5*

17 60 MOWER Item Part No. Qty. Description Item Part No. Qty. Description Mower Gearcase 48 Kit Nut-Locking-Top Shim Pin-Roll.125 x Washer-Flat-Steel.754 x 1.00 x Key-Woodruf.25 x.75 x Shim Nut Washer-Locking.500 x Bolt-Round Head Square Neck x 1.25 Grade Mounting Plate Rivet-Steel Right Hand.312 x Nut-Push Shim Screw-Tapping x Bolt-Hex x 1.25 Grade Spindle Sheave Washer-Locking.750 x Nut-Jam Spin Drive Zerk Fitting Inch Mower Deck Belt Cover LH Belt Cover RH Nut-Locking Spring Anchor Nut-Hex Plate Brace Ring-Retaining-Extension.625 x Bushing-Flange.625 x.750 x.500 x Idler Arm Idler Stud Nut-Locking-Center Nut-Lock-Jam-Center Idler-Flat 2.75 x.38 Dayco Spring-Tension.121 x 1.06 x Skid Bar Left-Hand Skid Bolt-Round Head Square Neck x.75 Grade Spacer Bolt-Round Head Square Neck x Bolt-Hex x 1.75 Grade Sheave Pin-Groove.188 x Blade Tray Blade Bearing-Ball.750 x x Spindle Shaft w/zerk Key-Woodruf.188 x.62 x.25 Model Spindle Housing Bearing Slinger Retainer Hub Blade Tray Mower Blade 22 1/2" Ramp Skid Bar R.H Bolt-Round Head Square Neck x Bolt-Round Head Square Neck x Deflector Nut-Locking-Center Flat Spring Chute Extension Bolt-Round Head Square Neck x Hinge Pin Bolt-Hex x.75 Grade Pin-Cotter.09 x Washer-Flat-Steel.406 x.81 x Nut-Hex Nut-Locking-Center Washer-Flat-Steel.344 x.688 x PTO Assembly Shearbolt & Nut Assembly Yoke Journal Cross & Bearing Assembly Slip Yoke Yoke & Shaft Yoke Spring Ball Collar Snap Ring Shaft Retention Kit V-Belt Nut-Locking-Top-Flange Bolt-Round Head Square Neck x 1.00 Grade 5 * Spindle Assembly part no (includes items 5, 46-50) 17

18 60 MOWER HANGERS & ROLLERS Model

19 60 MOWER HANGERS & ROLLERS Item Part No. Qty. Description Item Part No. Qty. Description Clamp Nut-Hex Washer-Locking Yoke Bolt-Round Head Square Neck x Nut-Locking-Center Washer-Flat-Steel.505 x.880 x Roller Frame Adjustment Rod Fitting-Lube x Wheel Bolt w/zerk Washer-Flat-Steel.511 x x Bearing-Ball.500 x x Wheel 5 In O.D Wheel Hub Spacer Tube Pad Bolt-Round Head Square Neck x 1.00 Grade Bolt-Round Head Square Neck x Bolt-Round Head Square Neck x Quadrant Washer-Flat-Steel.38 x.875 x Spring-Compression.063 x.53 x Nut-Locking Washer-Flat-Steel.781 x x Front Hanger Link Wear Plate Leveling Lever Right Hand Leveling Lever Left Hand Pin-Cotter.12 x Plate Clamp Front Hanger Pin-Roll.250 x Pin-Cotter.12 x Washer-Flat-Steel.50 x 1.25 x Roller Clamp Pin-Roll.250 x Shaft Roller Bolt-Round Head Square Neck x.75 Grade 5 19 Model Bracket-Roller Washer-Locking.500 x Roller Shaft Bolt-Hex x 1.00 Grade Hanger Arm Nut-Locking Mower Hanger Clevis Pin Spacer Clevis Pin Support Channel Spring-Compression.62 x.68 x Washer-Flat-Steel.531 x 1.06 x Arm Spacer Bolt-Round Head Square Neck x Nut Washer-Locking.500 x.125

20 20 48 MOWER DECK & DRIVE Model * * 22* 23* 25* 24* 21 26* * 33*

21 48 MOWER DECK & DRIVE Item Part No. Qty. Description Item Part No. Qty. Description Bracket Bolt-Hex x.75 Grade Nut-Locking Spring-Compression.106 x.63 x Washer-Flat-Steel.406 x.812 x Pin-Cotter.09 x Rod-Idler Spring Nut-Locking-Jam-Center Idler Zerk Idler Arm w/zerk Bolt-Button Head x 1.25 Grade Belt Cover RH Belt Cover LH Nut-Hex Washer-Locking Bolt-Round Head Square Neck x Nut-Jam Washer-Locking.750 x V-Belt Sheave Bearing-Ball.750 x 1.78 x Spindle Shaft w/zerk Key Spindle Housing Bolt-Round Head Square Neck x.75 Grade Washer-Flat-Steel.754 x x Spacer-Spindle Brace Left-Hand Washer-Flat-Steel.38x.875x Skid Bolt-Round Head Square Neck x Bearing Slinger Retainer Hub Blade Tray Blade Mower Deck w/decals Nut-Hex Washer-Locking.375 x Brace Right-Hand Sheave Pin-Groove.188 x Blade Tray Bolt-Round Head Square Short Neck x.75 Grade 5 21 Model Mower Gear Case Kit Pin-Roll.125 x Key-Woodruf.25 x.75 x Shim Mounting Plate Mounting Plate Shim Screw-Tap x Bolt-Hex x 1.25 Grade PTO Assembly Shim Nut-Locking-Top Bolt-Hex x 2.50 Grade Washer-Flat-Steel.344 x.688 x Shearbolt & Nut Assembly Yoke Journal Cross & Bearing Assembly Slip Yoke Yoke & Shaft Yoke Spring Ball Collar Snap Ring Nut-Hex Bolt-Round Head Square Neck x Nut-Locking-Top-Flange Guard, Toe 48" * Spindle Assembly part no (includes items 10, 21-26,32,33)

22 48 MOWER HANGERS & ROLLERS Model

23 48 MOWER HANGERS & ROLLERS Item Part No. Qty. Description Item Part No. Qty. Description Pin-Cotter.18 x Roller Shaft Washer-Flat-Steel.656 x 1.31 x Roller Nut-Hex Washer-Locking Clamp Roller Frame Yoke Nut Bolt-Round Head Square Neck x Washer-Flat-Steel.505 x.880 x Nut-Locking-Center Bolt-Round Head Square Neck x Link Washer-Flat-Steel.438 x 1.0 x Nut-Locking Adjustment Plate Adjustment Plate Adjustment Rod Quadrant Washer-Flat-Steel.323 x.625 x Bolt-Round Head Square Neck x Washer-Flat-Steel.38 x.875 x Spring-Compression.063 x.53 x Nut-Locking Washer-Flat-Steel.531 x 1.06 x Washer-Flat-Steel.765 x x Front Hanger Link Bolt-Hex x.75 Grade Wear Plate Leveling Lever RH Leveling Lever LH Washer-Flat-Steel.511 x 1.44 x Pin-Cotter.12 x Pin-Cotter.18 x Washer-Flat-Steel.50 x 1.25 x Front Hanger Pin-Roll.250 x 1.25 Model Washer-Locking.500 x Clamp Plate Bolt-Hex x 2.75 Grade Spacer Pivot Bolt-Round Head Square Neck x Bolt-Round Head Square Neck x Baffle Nut-Locking-Center Washer-Flat-Steel.281 x.62 x Baffle Tab Bolt-Round Head Square Neck x Roller Shaft Bracket-Roller Washer-Flat-Steel.531 x 1.06 x Spring-Compression.62 x.68 x Clevis Pin Arm Support Channel Spacer Spacer Clevis Pin Ramp Mower Hanger Hanger Arm Bolt-Hex x 1.00 Grade Roller Flat Spring Bolt-Round Head Square Neck x Bolt-Round Head Square Neck Grade x Bolt-Round Head Square Neck x Pin-Hinge Chute Extension Pin-Cotter.09 x Washer-Flat-Steel.406 x.812 x Bolt-Round Head Square Neck x 1.50 Grade Nut-Locking-Hex Washer-Flat-Steel.505 x 1.00 x

24 MOWER GEAR CASE Model ,

25 MOWER GEAR CASE Model ,031 Item Part No. Qty. Description Screw-Tapping 8-32 x Gear Case Cover Top Gasket Nut-Jam-Cotter Output Shaft Key-Square.25 x.625 x Gear (031) Gear-Bevel (026) Washer-Flat-Steel.781 x x Washer-Flat-Steel.781 x x Washer-Flat-Steel.781 x x Washer-Flat-Steel.781 x x Washer-Flat-Steel.781 x x Bearing-Cone.750 x Bearing-Cup x Screw-Tapping x Bearing Side Cover Side Cover Gasket Set Side Cover Gasket Side Cover Gasket Side Cover Gasket Gear Case Screw-Set x Plug Seal x x Spacer Key-Woodruf.25 x.75 x Gear (831015,031,038,301) Pin-Groove.188 x Pin-Groove.188 x Seal.750 x x Input Shaft Adjustment Plug Fitting-Lube x oz. Grease Stens 25

26 Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI Fax

Grass Collection System with Dump Hopper 200 Series

Grass Collection System with Dump Hopper 200 Series Grass Collection System with Dump Hopper 200 Series Owner/Operator & Parts Manual Model 892031 00466300A 3/07 Printed in USA TABLE OF CONTENTS Safety...................................... 3 Storage....................................

More information

Rear Engine Rider Parts Manual

Rear Engine Rider Parts Manual Rear Engine Rider Parts Manual Models 00 - RM0 0 - RM 0 - RM0 000C /0 Supercedes 000,A,B Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the

More information

44-Inch & 48-Inch Bagger

44-Inch & 48-Inch Bagger 44-Inch & 48-Inch Bagger Owner/Operator & Parts Manual Model 892025 00382700D 6/08 Printed in USA TABLE OF CONTENTS Safety..................................... 3 Storage...................................20

More information

Zoom & ZT Bagger. Owner/Operator & Parts Manual. Model B 3/09 Printed in USA

Zoom & ZT Bagger. Owner/Operator & Parts Manual. Model B 3/09 Printed in USA Zoom & ZT Bagger Owner/Operator & Parts Manual Model 815031 03870900B 3/09 Printed in USA TABLE OF CONTENTS Safety..................................... 3 Storage...................................15 Assembly..................................

More information

Walk-Behind Lawn Mowers

Walk-Behind Lawn Mowers Walk-Behind Lawn Mowers Parts Manual Models 160 - LM21 182 - LM21 18 - LM21S 184 - LM21SW 04056800 6/10 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied

More information

Zoom. Parts Manual. Models Zoom Zoom /03 Printed in USA

Zoom. Parts Manual. Models Zoom Zoom /03 Printed in USA Zoom Parts Manual Models 0 - Zoom 0 0 - Zoom 0 0000 0/0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you

More information

Walk-Behind Lawn Mowers

Walk-Behind Lawn Mowers Walk-Behind Lawn Mowers Parts Manual Models 171 LM21 16 LM21S 17 LM21SW 04502100 / Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.

More information

Walk-Behind Lawn Mower

Walk-Behind Lawn Mower Walk-Behind Lawn Mower Parts Manual Models 10 LM21 (SN 02240 +) 1 LM21S (SN 0228 +) 14 LM21SW (SN 02525 +) E10 The use of any gasoline exceeding 10% ethanol (E10) or 10% MTBE will void the product warranty.

More information

DIAMONDBACK/EDGE GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL

DIAMONDBACK/EDGE GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL DIAMONDBACK/EDGE GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL GRASS CATCHER W/WEIGHT: TUBE KIT: BLOWER KIT: 48 5101305 632093 632078 52 5101305 542119 632074 60 632086 542120 632081 3 WORLDLAWN POWER

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Collection System 966406901 CAUTION BEFORE ASSEMBLING GRASS CATCHER TO MOWER Set parking brake. Place motion control levers in NEUTRAL position. Turn ignition key OFF and remove

More information

ZT XL & Zoom XL Bagger

ZT XL & Zoom XL Bagger ZT XL & Zoom XL Bagger Owner/Operator & Parts Manual Model 815154 Bagger (SN 00101 +) 04723300 9/13 Printed in USA TABLE OF CONTENTS SAFETY................................... 3 STORAGE.................................20

More information

GRASS CATCHER PART S & OPERATORS MANUAL

GRASS CATCHER PART S & OPERATORS MANUAL GRASS CATCHER PART S & OPERATORS MANUAL WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWN.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103 2 3 4 OPERATORS MANUAL This catcher manual is for

More information

Sno-Thro. Platinum Series Models. Service Guide

Sno-Thro. Platinum Series Models. Service Guide Sno-Thro Platinum Series Models 908 Platinum SHO (SN 00000 +) 909 Platinum 8 SHO Track (SN 0000 +) 900 Platinum 0 SHO (SN 00000 +) Service Guide E0 ENGLISH 085600 8/5 TABLE OF CONTENTS SAFETY.............................

More information

Sno-Tek TM. Parts Manual. Models

Sno-Tek TM. Parts Manual. Models Sno-Tek TM Parts Manual Models 900 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up) 9009 Sno-Tek (Serial No. 0 and up) 900 Sno-Tek (Serial No. 0 and up)

More information

KING COBRA/CALIBER GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL

KING COBRA/CALIBER GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL KING COBRA/CALIBER GRASS COLLECTION SYSTEM PARTS & OPERATORS MANUAL GRASS CATCHER W/WEIGHTS: TUBE KITS: BLOWER KITS: 52 542128 52 542119 5101002 60 542129 60 542120 5101003 2 WORLDLAWN POWER EQUIPMENT

More information

42" ROUGH CUT TRAILMOWER

42 ROUGH CUT TRAILMOWER OWNERS MANUAL Model No. 45-03625 42" ROUGH CUT TRAILMOWER CAUTION: Read Rules for Safe Operation and Instructions Carefully IMPORTANT: BATTERY REQUIRED!! The battery is NOT included with the deck but must

More information

GROUNDSMASTER. 52 Recycler. for 120 Traction Unit. Model No & UP. Operator s Manual

GROUNDSMASTER. 52 Recycler. for 120 Traction Unit. Model No & UP. Operator s Manual FORM NO. 8-980 Rev A GROUNDSMASTER 5 Recycler for 0 Traction Unit Model No. 077 79000 & UP Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety

More information

OPERATOR S MANUAL FABRIC 3-BAG GRASS CATCHER PART NO PRINTED 8/2012 PRINTED IN USA

OPERATOR S MANUAL FABRIC 3-BAG GRASS CATCHER PART NO PRINTED 8/2012 PRINTED IN USA OPERATOR S MANUAL FABRIC -BAG GRASS CATCHER Models: GC-STC-V This manual contains the operating instructions and safety information for your Scag mower accessory. Reading this manual can provide you with

More information

Sno-Thro. Parts Manual. Models ST624E A 8/10 Printed in USA

Sno-Thro. Parts Manual. Models ST624E A 8/10 Printed in USA Sno-Thro Parts Manual Models 920001 - ST62E 0199100A 8/10 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide

More information

ROTARY TILLER. Operation, Service & Parts Manual For "AS" Series. FORM: ASTillerBook.QXD

ROTARY TILLER. Operation, Service & Parts Manual For AS Series. FORM: ASTillerBook.QXD ROTARY TILLER Operation, Service & Parts Manual For "AS" Series FORM: ASTillerBook.QXD April 2002 TABLE OF CONTENTS Preparation......................................1 Assembly Instructions.............................2

More information

Hydro Pro Series. Owner/Operator Manual

Hydro Pro Series. Owner/Operator Manual Hydro Pro Series Owner/Operator Manual Models 98805 - HR56FX 98808 - HE748FL 9880 - HR56FXP 988 - HE748FX 9884 - HE748FXP 9885 - HE748FLP 9886 - HE95FL 9887 - HE95FLP ENGLISH FRANÇAIS ESPAÑOL 0049600 0/05

More information

OPERATOR S MANUAL. Operator Controlled Discharge Chute STT-OCDC-61V Scag Power Equipment Division of Metalcraft of Mayville, Inc.

OPERATOR S MANUAL. Operator Controlled Discharge Chute STT-OCDC-61V Scag Power Equipment Division of Metalcraft of Mayville, Inc. OPERATOR S MANUAL Operator Controlled Discharge Chute Models: STT-OCDC-52V STT-OCDC-61V This manual contains the operating instructions, assembly instructions and safety information for your Scag accessory.

More information

Parts Manual. Models Sno-Tek /10 Printed in USA

Parts Manual. Models Sno-Tek /10 Printed in USA Parts Manual Models 9940 - Sno-Tek 0 04700 9/0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an

More information

44 and 52 Twin Bagger 100 Series Z Master

44 and 52 Twin Bagger 100 Series Z Master Form No. 7 87 and 5 Twin Bagger 00 Series Z Master Model No. 7855 Serial No. 000000 and Up Operator s Manual English (CE) Contents Page Introduction................................ Safety.....................................

More information

Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number:

Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number: Operator s Manual R WYZ48/52/60CS BAGGER Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE 68310 Toll Free Number: 1-800-267-4255 OPERATOR S MANUAL This catcher manual is for

More information

TO THE OWNER ASSEMBLY

TO THE OWNER ASSEMBLY TO THE OWNER This is an operational and general maintenance manual only and does not cover repair. All repair work must be performed by an authorized BOLENS DEALER or the factory warranty is void. Bolens

More information

Walker Loader Bucket OPERATOR S AND PARTS MANUAL

Walker Loader Bucket OPERATOR S AND PARTS MANUAL Walker Loader Bucket OPERATOR S AND PARTS MANUAL Please Read and Save These Instructions For Safety, Read all Safety and Operation Instructions Prior To Operating Machine P/N 6690 TABLE OF CONTENTS Introduction

More information

OPERATOR S MANUAL MODEL GC-SFZ

OPERATOR S MANUAL MODEL GC-SFZ R Made in the USA by MODEL GC-SFZ THIS MANUAL CONTAINS THE OPERATING INSTRUCTIONS AND SAFETY INFORMA- TION FOR YOUR SCAG ACCESSORY. READ- ING THIS MANUAL WILL PROVIDE YOU WITH MAINTENANCE AND ADJUSTMENT

More information

Wheel Horse. 44 Snowthrower. for 5xi Lawn and Garden Tractors. Model No & Up. Operator s Manual

Wheel Horse. 44 Snowthrower. for 5xi Lawn and Garden Tractors. Model No & Up. Operator s Manual FORM NO. 8 Rev A Wheel Horse Snowthrower for 5xi Lawn and Garden Tractors Model No. 7966 890050 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information

More information

Model 858-RH. Operating and Assembly Manual. Palmor Products Inc Serum Plant Road Thorntown, IN 46071

Model 858-RH. Operating and Assembly Manual. Palmor Products Inc Serum Plant Road Thorntown, IN 46071 Model 5-RH Operating and Assembly Manual Palmor Products Inc. 55 Serum Plant Road Thorntown, IN 6071 3/31/015 SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the

More information

Sno-Thro. Parts Manual. Models ST8524E ST724E ST5524E ST ST ST7524

Sno-Thro. Parts Manual. Models ST8524E ST724E ST5524E ST ST ST7524 Sno-Thro Parts Manual Models 93204 - ST24E 932046 - ST724E 932047 - ST24E 93204 - ST20 9323 - ST20 932312 - ST724 006600A /06 Printed in USA THE MANUAL Before you operate your unit, carefully and completely

More information

BAD BOY GRASS BAGGING SYSTEM

BAD BOY GRASS BAGGING SYSTEM BAD BOY GRASS BAGGING SYSTEM TABLE OF CONTENTS WILL FIT ALL 2019 OUTLAW SERIES MOWERS SAFETY RULES AND INFORMATION.. 2 GENERAL OPERATION.... 3 WARRANTY INFORMATION.... 5 INSTALLATION INSTRUCTIONS.. 6 PAGE

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Blower Kit 42" Collection System 966529101 2010 HTC. All Rights Reserved. Beatrice, NE. Printed in U.S.A. CONTENTS SAFETY RULES...4 ASSEMBLY...6 OPERATION...10 TIPS FOR IMPROVED

More information

OPERATOR S MANUAL. 20-bu 3-Point Hitch Material Collection System. LP65048 Supplier ST /07/2017 English. North American Edition Printed in USA

OPERATOR S MANUAL. 20-bu 3-Point Hitch Material Collection System. LP65048 Supplier ST /07/2017 English. North American Edition Printed in USA OPERATOR S MANUAL 20-bu 3-Point Hitch Material Collection System LP65048 Supplier ST48289 11/07/2017 English North American Edition Printed in USA Introduction Using Your Operator s Manual Read this entire

More information

Log Splitter. Owner/Operator Manual. Models HCWP1-26

Log Splitter. Owner/Operator Manual. Models HCWP1-26 Log Splitter Owner/Operator Manual Models HCWP1-26 SAFETY..........................2 SAFETY WARNING SYMBOL.........3 SAFETY RULES.................. 4-5 SPECIFICATIONS................. 6 CONTROLS AND FEATURES.......

More information

Service Guide. Deluxe Series Sno-Thro. Models Deluxe 24 (SN ) Deluxe 28 (SN ) Deluxe 30 (SN )

Service Guide. Deluxe Series Sno-Thro. Models Deluxe 24 (SN ) Deluxe 28 (SN ) Deluxe 30 (SN ) Service Guide Deluxe Series Sno-Thro Models 921045 Deluxe 24 (SN 000101 +) 921046 Deluxe 28 (SN 000101 +) 921047 Deluxe 30 (SN 000101 +) 921048 Deluxe 28 SHO (SN 000101 +) 921049 Deluxe 30 EFI (SN 000101

More information

BrentChalmers.com. Owner Operation and Maintenance Manual ROTARY MOWER MODEL WISCONSIN,U.S.A. PORT ATTACHMENT 28 INCH WASHI~GTON,

BrentChalmers.com. Owner Operation and Maintenance Manual ROTARY MOWER MODEL WISCONSIN,U.S.A. PORT ATTACHMENT 28 INCH WASHI~GTON, ROTARY MOWER Owner Operation and Maintenance Manual ATTACHMENT 28 INCH MODEL 15100-01 (2) Do not allow children to operate powered equipment at any time. The average child is not capable of coping with

More information

ProLine. 44 Mower. for 120 Traction Unit. Model No & Up. Operator s Manual

ProLine. 44 Mower. for 120 Traction Unit. Model No & Up. Operator s Manual FORM NO. 9 ProLine Mower for 0 Traction Unit Model No. 05 99000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety of others. Also become

More information

Wheel Horse. 42 Mower. for Lawn and Garden Tractors. Model No & Up. Operator s Manual

Wheel Horse. 42 Mower. for Lawn and Garden Tractors. Model No & Up. Operator s Manual FORM NO. 9 559 Rev A Wheel Horse 4 Mower for Lawn and Garden Tractors Model No. 78 890000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the

More information

Post Hole Digger. Operation Manual MODEL

Post Hole Digger. Operation Manual MODEL Post Hole Digger MODEL 107798 Operation Manual This safety alert symbol identifies important safety messages in this manual. Failure to follow this important safety information may result in serious injury

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 455-IC/PRO/H Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 03-08-12 SAFETY RULES Remember, any power equipment can cause injury if

More information

OPERATOR S MANUAL MODEL GC-STC-V

OPERATOR S MANUAL MODEL GC-STC-V MODEL GC-STC-V THIS MANUAL CONTAINS THE OPERATING INSTRUCTIONS AND SAFETY INFORMA- TION FOR YOUR SCAG ACCESSORY. READ- ING THIS MANUAL WILL PROVIDE YOU WITH MAINTENANCE AND ADJUSTMENT PROCEDURES TO KEEP

More information

Reproduction. Not for OPERATOR S MANUAL. Turbo Vacuum System. Model Description Turbo Vacuum Collection System (For 60 Mower Decks)

Reproduction. Not for OPERATOR S MANUAL. Turbo Vacuum System. Model Description Turbo Vacuum Collection System (For 60 Mower Decks) OPERATOR S MANUAL Turbo Vacuum System Model Description 1695759 Turbo Vacuum Collection System (For 60 Mower Decks) Copyright Briggs & Stratton Power Products Group, LLC Milwaukee, WI USA. All Rights Reserved.

More information

m WARNING: READ ALL m WARNING: This unit can be dangerous! Careless or m DANGER: Risk of cut. Keep hands and feet away IMPORTANT! Safety Instructions

m WARNING: READ ALL m WARNING: This unit can be dangerous! Careless or m DANGER: Risk of cut. Keep hands and feet away IMPORTANT! Safety Instructions 16-Inch Manual Reel Mower with Catcher Model No. MJ500M Form No. SJ-MJ500M-880E A Division of Snow Joe, LLC IMPORTANT! Safety Instructions m WARNING: READ ALL INSTRUCTIONS BEFORE USE. m WARNING: This unit

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual Collection System 966406901 CAUTION BEFORE ASSEMBLING GRASS CATCHER TO MOWER Set parking brake. Place motion control levers in NEUTRAL position. Turn ignition key OFF and remove

More information

Zoom. Parts Manual. Models A 5/08 Printed in USA

Zoom. Parts Manual. Models A 5/08 Printed in USA Zoom Parts Manual Models 108 0 1087 0 108 1 101 1 0100A /08 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 1080 Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 08-02-16 SAFETY RULES Remember, any power equipment can cause injury if operated

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 455-IC/PRO/H Operating and Assembly Manual Palmor Products Inc. 5225 Serum Plant Road Thorntown, IN 46071 03-08-12 SAFETY RULES Remember, any power equipment can cause injury if operated improperly

More information

Quiet Collector. Model No & Up

Quiet Collector. Model No & Up FORM NO. -8GB Rev A Quiet Collector Model No. 795-890000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety and the safety

More information

Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting Warranty. Twin Bagger 19A30014OEM

Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting Warranty. Twin Bagger 19A30014OEM Safe Operation Practices Set-Up Operation Maintenance Service Troubleshooting Warranty Operator s Manual Twin Bagger 19A30014OEM WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL

More information

Lawn Edger Parts Manual

Lawn Edger Parts Manual Lawn Edger Parts Manual Models 80 Lawn Edger 80 Lawn Edger 80 Lawn Edger CE 000D /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.

More information

BEFCO. Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE. AA4-120 (fits models Hop 209 & 212) DEFLECTOR

BEFCO. Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE. AA4-120 (fits models Hop 209 & 212) DEFLECTOR BEFCO Operator s Manual BABY HOP & HOP FERTILIZER SPREADERS ACCESSORIES SIDE ROW DISCHARGE AA-0 (fits models Hop 09 & ) DEFLECTOR AA-0 (fits models Baby Hop 0 & 06) 009-95 (fits models Hop 0 & 06) 009-968

More information

Post Hole Diggers Compact Standard Heavy Duty

Post Hole Diggers Compact Standard Heavy Duty Post Hole Diggers Compact Standard Heavy Duty MODEL 90 / MODEL 100 / MODEL 110 # 100623 # 100498 # 100624 Operation Manual This safety alert symbol identifies important safety messages in this manual.

More information

THE FINISHING TOUCH 42 FINISH CUT MOWER SELF PROPELLED WALK BEHIND

THE FINISHING TOUCH 42 FINISH CUT MOWER SELF PROPELLED WALK BEHIND Visit us at: www.swisherinc.com OWNER S MANUAL STARTING SERIAL #: L105-074001 MODEL NO. WB11542F Rev. Important! Read and follow all Safety Rules and Instructions before operating this equipment. THE FINISHING

More information

MODELS 58, 903. Intake Hose Kit for LBC Series 1 Walk- Behind Leaf Blowers For Leaf Blower models: LBC55151BV LBC915751BV

MODELS 58, 903. Intake Hose Kit for LBC Series 1 Walk- Behind Leaf Blowers For Leaf Blower models: LBC55151BV LBC915751BV INSTALLATION INSTRUCTIONS OPERATING INSTRUCTIONS PARTS LIST Intake Hose Kit for LBC Series 1 Walk- Behind Leaf Blowers For Leaf Blower models: LBC55151BV LBC915751BV MODELS 58, 903 Actual product may differ

More information

OWNER S MANUAL 40 LAWN AERATOR SAT-40 BH. Assembly Installation Operation Repair Parts. Visit us on the web! MODEL:

OWNER S MANUAL 40 LAWN AERATOR SAT-40 BH. Assembly Installation Operation Repair Parts. Visit us on the web!   MODEL: OWNER S MANUAL 40 LAWN AERATOR MODEL: SAT-40 BH Assembly Installation Operation Repair Parts For the latest product updates & setup tips: Visit us on the web! www.brinly.com Important: This manual contains

More information

ROTARY MOWER OPERATION, SERVICE & PARTS MANUAL FOR

ROTARY MOWER OPERATION, SERVICE & PARTS MANUAL FOR ROTARY MOWER OPERATION, SERVICE & PARTS MANUAL FOR L-G-40-40-P, L-G-48-40-P, L-G-60-40-P & L-G-72-40-P Slip Clutch Models: L-G-60-40-SC-P & L-G-72-40-SC-P February 2003 FORM: RotMwrBook.QXD TABLE OF CONTENTS

More information

Quiet Collector. Model No & Up

Quiet Collector. Model No & Up FORM NO. -0 Quiet Collector Model No. 79-990000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain information about your safety and the safety of others.

More information

48 Side Discharge Mower

48 Side Discharge Mower FORM NO. 9 7GB Wheel Horse 48 Side Discharge Mower for Lawn & Garden Tractors Model No. 7868 790000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety

More information

Reproduction. Not for OPERATOR S MANUAL. Turbo Vacuum System ATTACHMENT. Mfg. No. Description

Reproduction. Not for OPERATOR S MANUAL. Turbo Vacuum System ATTACHMENT. Mfg. No. Description ATTACHMENT OPERATOR S MANUAL Turbo Vacuum System Mfg. No. Description 1695757 Turbo Vacuum Collection System (For 54 Mower Decks) Copyright 2013 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 470-/H/PRO/IC Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 11-11-11 SAFETY RULES Remember, any power equipment can cause injury if

More information

Wheel Horse. 52 Mowers. Model No & Up Model No & Up. Operator s Manual

Wheel Horse. 52 Mowers. Model No & Up Model No & Up. Operator s Manual FORM NO. 9-567 Wheel Horse 5 Mowers for Lawn & Garden Tractors Model No. 7880 890000 & Up Model No. 7885 890000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about

More information

RED23305 Owner s Manual

RED23305 Owner s Manual RED23305 Owner s Manual 5 foot, 3-Point Mounted Snow Blower 270 West Park Avenue Huron, SD 57350 866-526-5682 Serial Number: Date of Purchase: Red Devil Snow Blower See Figure 1. 1. The Red Devil Snow

More information

OPE R AT O R S MANU A L QUICK-HITCH ADAPTER. 5BP (Field conversion kit)

OPE R AT O R S MANU A L QUICK-HITCH ADAPTER. 5BP (Field conversion kit) OPE R AT O R S MANU A L 5BP006750 (Field conversion kit) Manual 5BP97378B Date 06/8/05 SAFETY Take note! This safety alert symbol found throughout this manual is used to call your attention to instructions

More information

SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER

SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER SETUP, PARTS & MAINTENANCE MANUAL 2 BAG CATCHER MODELS: 970338 2 BAG CATCHER, 36 970339 2 BAG CATCHER, 42 970340 2 BAG CATCHER, 48 970341 2 BAG CATCHER, 52 WARNING: If incorrectly used this machine can

More information

IKON-X IKON-XL. Operator s Manual Manuel du Utilisateur. Models IKON-XL 42 CARB (SN ) IKON-X 42 (SN )

IKON-X IKON-XL. Operator s Manual Manuel du Utilisateur. Models IKON-XL 42 CARB (SN ) IKON-X 42 (SN ) 950 IKON-X 4 (SN 030000 +) 95 IKON-X 4 (SN 030000 +) 95 IKON-X 5 (SN 030000 +) 953 IKON-X 5 (SN 030000 +) 954 IKON-X 4 CARB (SN 030000 +) 955 IKON-X 5 CARB (SN 030000 +) 956 IKON-XL 4 (SN 030000 +) 957

More information

Precision Reel Mowers OPERATOR S MANUAL

Precision Reel Mowers OPERATOR S MANUAL Precision Reel Mowers OPERATOR S MANUAL Models RL205 / RL207 RL255 / RL257 / RL2510 Introduction Read this information carefully to learn how to operate and maintain your product properly and to avoid

More information

Agri-Fab OWNERS MANUAL. Model No " ROUGH CUT TRAILMOWER. CAUTION: Read Rules for Safe Operation and Instructions Carefully

Agri-Fab OWNERS MANUAL. Model No  ROUGH CUT TRAILMOWER. CAUTION: Read Rules for Safe Operation and Instructions Carefully Agri-Fab OWNERS MANUAL Model No. 45-0362 CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts 42" ROUGH CUT TRAILMOWER NOTE: Your mower deck will

More information

Operator and Parts Manual

Operator and Parts Manual Operator and Parts Manual 48" Collection System 966792801 CONGRATULATIONS on the purchase of a new collection system. It has been designed, engineered and manufactured to give you the best possible dependability

More information

Trench Filler for Compact Utility Loaders

Trench Filler for Compact Utility Loaders Form No. 3353-608 Rev A Trench Filler for Compact Utility Loaders Model No. 22472 260000001 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN) Contents Page Introduction................................

More information

IKON X. Operator s Manual Manuel du Utilisateur. Models IKON X 42 (SN ) IKON X 52 (SN )

IKON X. Operator s Manual Manuel du Utilisateur. Models IKON X 42 (SN ) IKON X 52 (SN ) IKON X Operator s Manual Manuel du Utilisateur Models 9575 IKON X 4 (SN 0000 +) 9577 IKON X 5 (SN 0000 +) 9579 IKON X 4 CARB (SN 0000 +) E0 ENGLISH FRANÇAIS 0484400B 6/5 Printed in USA TABLE OF CONTENTS

More information

OPERATOR S MANUAL. Operator Controlled Discharge Chute

OPERATOR S MANUAL. Operator Controlled Discharge Chute Operator Controlled Discharge Chute Models: STC/STCII/SCZ-OCDC-48V STC/STCII/SCZ-OCDC-52V STC/STCII-OCDC-61V STT-STTII-OCDC-52V SCZ/STT/STTII-OCDC-61V SVR-OCDC-48V SVR-OCDC-52V SVR-OCDC-61V OPERATOR S

More information

48 Side Discharge Mower

48 Side Discharge Mower FORM NO. 9 650 Rev A Wheel Horse 8 Side Discharge Mower for Classic Garden Tractor Model No. 786 890000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your

More information

RC190-GCV160 RC190-BS550

RC190-GCV160 RC190-BS550 19 Hover Mower OPERATOR S MANUAL P O W E R E D B Y Models RC190-GCV160 RC190-BS550 California Trimmer 1028 4 th St. SW, Bldg. A Auburn, Washington 98001 CalTrimmer.com Introduction Read this information

More information

FIELD KIT FITTING INSTRUCTIONS FOR TR3

FIELD KIT FITTING INSTRUCTIONS FOR TR3 24795G-GB (rev.1) FIELD KIT FOR TR3 Rear Roller Brush Kit LMAC185-TR3-F for "Fairway" style Cutting Units Series: AAG, AAH, AAJ, AAK IMPORTANT NOTE - TR3 ONLY Grassboxes cannot be used with these Cutting

More information

IKON X. Operator s Manual Manuel du Utilisateur. Models IKON X 42 (SN ) IKON X 52 (SN )

IKON X. Operator s Manual Manuel du Utilisateur. Models IKON X 42 (SN ) IKON X 52 (SN ) IKON X Operator s Manual Manuel du Utilisateur Models 9575 IKON X 4 (SN 0000 +) 9577 IKON X 5 (SN 0000 +) 9579 IKON X 4 CARB (SN 0000 +) E0 ENGLISH FRANÇAIS 0484400A /5 Printed in USA TABLE OF CONTENTS

More information

42in GT Classic Single Stage Snowthrower Conversion Kit XT Series Garden Tractor

42in GT Classic Single Stage Snowthrower Conversion Kit XT Series Garden Tractor Form No. 9 66 in GT Classic Single Stage Snowthrower Conversion Kit XT Series Garden Tractor Part No. 06 88 Installation Instructions English (EN) This kit is for installing an existing 00 Series Classic

More information

Model Sno-Tek 20 (Serial No and up)

Model Sno-Tek 20 (Serial No and up) Parts Manual Model 0 Sno-Tek 20 (Serial No. 05000 and up) Gasoline containing up to 0% ethanol (E0) or up to 0% MTBE (methyl tertiary butyl ether) is acceptable for use in this machine. The use of any

More information

Wheel Horse. 48 Mower. for Lawn and Garden Tractors. Model No & Up. Operator s Manual

Wheel Horse. 48 Mower. for Lawn and Garden Tractors. Model No & Up. Operator s Manual FORM NO. 5 Wheel Horse 48 Mower for Lawn and Garden Tractors Model No. 786 990000 & Up Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety

More information

Air Cushion Hover Mower

Air Cushion Hover Mower Air Cushion Hover Mower OPERATOR S MANUAL Model RC190-GCV160 Introduction Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage.

More information

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions...

TABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions... TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions & Safety Sign Locations... 2 Operating Instructions... 3 Assembly Instructions... 5 500 & 600 Snowblower Drawings... 8 500 & 600 Snowblower

More information

Wasp H.P. Parts Manual

Wasp H.P. Parts Manual Wasp H.P. Parts Manual Models 9880000 - EHWKA13S 988000 - EHWKA19S 9880300 - EHWKA198S ENGLISH 031903 3/09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals

More information

North Dakota State University Grounds Maintenance Equipment

North Dakota State University Grounds Maintenance Equipment North Dakota State University Grounds Maintenance Equipment I. Introduction Grounds maintenance equipment is an important part of the work activities on NDSU campus. They can make grounds maintenance jobs

More information

Z Master. 62 Mower. for Z Master Z 255 Traction Unit. Model No & UP. Operator s Manual

Z Master. 62 Mower. for Z Master Z 255 Traction Unit. Model No & UP. Operator s Manual FORM NO. 9 88 Z Master 6 Mower for Z Master Z 55 Traction Unit Model No. 7408 89000 & UP Operator s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety

More information

HD Series Bagger. Owner/Operator & Parts Manual. Model HD Series Three-Bag Bagger B 5/10 Printed in USA

HD Series Bagger. Owner/Operator & Parts Manual. Model HD Series Three-Bag Bagger B 5/10 Printed in USA HD Series Bagger Owner/Operator & Parts Manual Model 891003 HD Series Three-Bag Bagger 03776000B 5/10 Printed in USA TABLE OF CONTENTS Safety...................................... 3 Assembly...................................

More information

Operating and Assembly Manual

Operating and Assembly Manual Model 380/385-IC/385-LH Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 2-0916 SAFETY RULES Remember, any power equipment can cause injury

More information

IMPORTANT OPERATING INSTRUCTIONS DOMESTIC & COMMERCIAL LAWNMOWERS LITTLE BOB UTILITY BIG BOB UTILITY

IMPORTANT OPERATING INSTRUCTIONS DOMESTIC & COMMERCIAL LAWNMOWERS LITTLE BOB UTILITY BIG BOB UTILITY IMPORTANT OPERATING INSTRUCTIONS DOMESTIC & COMMERCIAL LAWNMOWERS 645 18 LITTLE BOB UTILITY 653 21 BIG BOB UTILITY ALLPOWER INDUSTRIES a limited partnership A.B.N 46 650 681 742 Unit 5 102-105 Bridge Rd,

More information

Sno-Thro. Compact Series. Operator s Manual Manuel du Utilisateur. Models Classic 24 (SN ) Compact 20 (SN )

Sno-Thro. Compact Series. Operator s Manual Manuel du Utilisateur. Models Classic 24 (SN ) Compact 20 (SN ) Operator s Manual Manuel du Utilisateur Compact Series Models 920025 Classic 24 (SN 000101 004999) 920026 Compact 20 (SN 000101 +) 920027 Compact 24 (SN 000101 +) 920028 Compact 24 Track (SN 000101 +)

More information

Wheel Horse. 48 Snow/Dozer Blade. Model No & Up. Operator s Manual

Wheel Horse. 48 Snow/Dozer Blade. Model No & Up. Operator s Manual FORM NO. 9 878 Rev A Wheel Horse 8 Snow/Dozer Blade for 5xi Lawn and Garden Tractors Model No. 7955 890000 & Up Operator s Manual IMPORTANT: Read this manual, and your tractor manual, carefully. They contain

More information

THE GIANT-VAC PTO BLOWER MODELS 2000*/3200**/4000***

THE GIANT-VAC PTO BLOWER MODELS 2000*/3200**/4000*** THE GIANT-VAC PTO BLOWER MODELS 2000*/3200**/4000*** Congratulations! ASSEMBLY INSTRUCTIONS AND OPERATOR S MANUAL You have just purchased one of the finest pieces of outdoor power equipment on the market

More information

Agri-Fab OWNERS MANUAL. Model No " ROUGH CUT TRAILMOWER. CAUTION: Read Rules for Safe Operation and Instructions Carefully

Agri-Fab OWNERS MANUAL. Model No  ROUGH CUT TRAILMOWER. CAUTION: Read Rules for Safe Operation and Instructions Carefully Agri-Fab OWNERS MANUAL Model No. 45-03071 45-0361 CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts 42" ROUGH CUT TRAILMOWER the fastest way

More information

All Seasons Power Brush

All Seasons Power Brush All Seasons Power Brush Owner/Operator Manual Models 9650 - PB96 Transfer model & serial number label from product registration here. Coller l autocollant du modèle et du numéro de série dans cet encadré.

More information

Reproduction. Not for OPERATOR S MANUAL. Snow Blade & Hitch ATTACHMENT Snow Blade & Hitch for Large Frame & Small Frame Tractor

Reproduction. Not for OPERATOR S MANUAL. Snow Blade & Hitch ATTACHMENT Snow Blade & Hitch for Large Frame & Small Frame Tractor ATTACHMENT OPERATOR S MANUAL Snow Blade & Hitch Mfg. No. Description 1696092-00 42 Snow Blade & Hitch for Large Frame & Small Frame Tractor 1752677 Rev. D 2 Table of Contents Hardware Bag Contents... 4

More information

Power Brush 28 Parts Manual

Power Brush 28 Parts Manual Power Brush 28 Parts Manual Models 92025 Power Brush 28 (Serial Number 00000 and up) 92 Power Brush 28 (Serial Number 00000 and up) Gasoline containing up to 0% ethanol (E0) or up to 0% MTBE (methyl tertiary

More information

Zoom. Operator s Manual Manuel du Utilisateur. Models Zoom 34 (SN ) Zoom 42 (SN ) Zoom 50 (SN )

Zoom. Operator s Manual Manuel du Utilisateur. Models Zoom 34 (SN ) Zoom 42 (SN ) Zoom 50 (SN ) Zoom Operator s Manual Manuel du Utilisateur Models 95 Zoom 34 (SN 0000 +) 953 Zoom 4 (SN 0000 +) 955 Zoom 50 (SN 0000 +) 9509 Zoom 34 CARB (SN 0000 +) 9533 Zoom 4 CARB (SN 0000 +) 9535 Zoom 50 CARB (SN

More information

48in Snow Blade TimeCutter Z Riding Mower Attachment

48in Snow Blade TimeCutter Z Riding Mower Attachment Form No. 9-8 8in Snow Blade TimeCutter Z Riding Mower Attachment Model No. 796 Serial No. 000000 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN, GB) Contents Page

More information

36 Tiller Wheel Horse Lawn and Garden Tractor Attachment

36 Tiller Wheel Horse Lawn and Garden Tractor Attachment Form No. 9 6 Rev B 6 Tiller Wheel Horse Lawn and Garden Tractor Attachment Model No. 797 890000 and Up Operator s Manual English(En) Contents Page Introduction................................ Safety.....................................

More information

Operator's Manual. VC-60 & VC-60 Plus Harper Industries, Inc. 7/03 Part No

Operator's Manual. VC-60 & VC-60 Plus Harper Industries, Inc. 7/03 Part No Operator's Manual VC-60 & VC-60 Plus 2003 Harper Industries, Inc. 7/03 Part No. 970066 Thank you for purchasing a Harper/Goossen Verti-Cutter. As with all Harper/Goossen products, the Harper/Goossen Verti-Cutter

More information

DFS Vac Collection System 400 Series Z Master

DFS Vac Collection System 400 Series Z Master Form No. 0 DFS Vac Collection System 00 Series Z Master Model No. 780 Serial No. 000000 and Up Operator s Manual Register your product at www.toro.com Original Instructions (EN/GB) Contents Page Introduction................................

More information

Zoom. Owner/Operator Manual. Models B 2/08 Printed in USA ENGLISH

Zoom. Owner/Operator Manual. Models B 2/08 Printed in USA ENGLISH Zoom Owner/Operator Manual Models 9507 450 9505 50 9503 840 950 634 ENGLISH 0997700B /08 Printed in USA TABLE OF CONTENTS SAFETY......................... 3 STORAGE...................... 5 ASSEMBLY.......................

More information