Service & Operation Manual. H619 Pulled Scraper

Size: px
Start display at page:

Download "Service & Operation Manual. H619 Pulled Scraper"

Transcription

1 Service & Operation Manual H619 Pulled Scraper

2 Forward Humdinger Equipment LTD. is committed to your satisfaction with our products and services. Please review this manual and learn your product. This machine is the culmination of many years of experience in the scraper business and was designed using the state of the art computer aided design equipment. This combination of resources results in a superior product. We want you productive and satisfied. If you have questions about your machine we encourage you to contact us at We can also be located on the web at Humdingerequipment.com. As our products evolve and improve, you can find the latest information on our website. Thank You

3 Operation Section Daily Walk Around Inspection For maximum service life, performance, and safety each machine should be inspected daily before operation. Perform a general walk around looking for missing or loose bolts, hydraulic leaks, structural damage or cracks, and build up of trash or material on the machine. Repairs should be made before continued operation of the machine. In addition these specific areas should be checked: 1) Tires should be checked for damage and proper inflation. The proper cold inflation pressure is 76 psi for 34 ply tires and 62 psi for 28 ply tires. If tires are checked when they are not cold do not lower the pressure if it is above the recommended pressure. Only lower the pressure if the tire is cold. If it is below the recommended pressure and the tire is warm bring the pressure up to the cold inflation pressure and then check it the next time the tire is cold. It is preferable that the tires be inflated only with Nitrogen. Air can be used if Nitrogen is not available. 2) Check the draft frame for cracks or distortion.

4 3) Check the draft frame bolts for tightness. If loose, torque to 320 Ft-Lbs 8) Check the Apron Arm Bolts for proper tightness. Proper torque is 320 Ft-Lbs. Grease daily. 9) Inspect the bowl, apron, and ejector for cracks or damage and make any necessary repairs. 10) Grease the Bowl and Apron Lift Cylinders daily (Top & Bottom) 4) Tire nuts and studs. Wheel nuts should be torqued to 320 Ft-Lbs 5) Check hydraulic lines and hoses for missing or loose clamps and damaged or worn hoses. Replace or repair as necessary. 6) Check both hitches for cracks, damage or unusual wear. Repair as necessary. 7) Check apron ball retention bolts for tightness. Proper torque is 320 Ft-Lbs 11) Check that all pin joints fasteners are in place and are tight.

5 12) Check cutting edges, router bits and tips for wear damage or missing bolts. Make repairs as necessary. 14) Check lines for wear and replace as necessary. 13) Check Lower and Upper Ejector Rollers for Adjustment and Proper Operation

6 Operating Techniques Loading 1) While approaching cut, make sure that the ejector is fully returned to the rear of the bowl and that the apron is at the desired opening. If pulling units in tandem both machines should be in this mode. Proper opening of the apron depends on operator preference and the material being loaded. In general, the operator will develop sighting off the apron to determine the opening needed. 2) While approaching cut reduce travel speed and downshift the tractor to the proper gear for the material being loaded. For reference most materials will load properly around 5 mph. 3) Lower the bowl to start the cut. The cut should be shallow enough to allow the tractor speed to remain constant while reducing tire slippage. To reduce tire slippage raise the bowl incrementally until the tire slippage becomes minimal. Bowl depth can be determined by marking of the depth gage shafts. 4) Downshift if more torque is required in the cut. 5) Pull the scrapers in as straight a line as possible. Large radius cuts are permitted but turning with the bowl in the ground may cause structural damage. 6) Do not overload the bowl. In general more material will be moved as soon as the bowl is loaded to the rated capacity. Attempting to load addition material in the bowl is inefficient, requires additional fuel, and increases tire wear. 7) When the bowl is full, lower the apron and raise the bowl to carrying height. 8) If loading the second bowl repeat the operation. The second bowl is loaded by sighting off the front ejector to get the apron height correct. Bowl depth is measured by feel through tractor lugging and tire slippage and looking at the depth gage shafts. 9) If pulling in tandem, load the front bowl first. Optional Loading Technique: Enter the cut with both bowls lowered close to the ground. Lower and load the front bowl. When the front bowl is full, raise it. Raising the front bowl will lower the rear bowl. If done properly the rear bowl will be lowered to approximately the correct digging depth. Modulate the depth as required. This technique allows for momentum to be maintained and for a smooth cut area. Traveling 1) Raise the bowl high enough to avoid obstructions. 2) Travel at speed commensurate with the haul road conditions and traffic on the jobsite. Excessive

7 speed with poor haul roads will cause reduced life of the machine. Consult with local regulations regarding the applicability of brakes. 3) Reduce speed when making turns. 4) Unless other rules apply on the jobsite, unloaded machines should yield to loaded machines. 5) Traveling on side slopes requires caution. Never turn uphill on the side slope. If the machines start to slide, turn downhill. 6) Hauls roads should be maintained properly with graders and water trucks used to prevent excessive dust that causes lower visibility. Dumping and Spreading 1) When approaching the fill, maintain the proper engine rpm. 2) Lower the bowl(s) the desired fill strike off height. 3) Maintain speed to prevent material build up in front of the machine. 4) Both scrapers can be dumped at the same time if desired. 5) Open the apron and the ejector will come forward ejecting the material. 6) After finishing the dump raise the bowls and return the ejector and reset the apron to the proper position for the next load. Top Loading Scrapers This procedure must be followed to top load scrapers or damage will occur to structures and cylinders. 1) Lower the bowl(s) completely to the ground. 2) Do not raise the rear wheels off the ground during the lowering operation 3) The tractor must be braked or in park during loaded. 4) Because the weight of excavator loaded material is higher per cubic yard than that loaded by a scraper, the fully loaded bowl should be reduced by 2 yards. The rated bowl capacity of the H169 is Lbs. Parking the Machine 1) Park on a level surface and set the parking brake. 2) Lower the bowl to the ground. Apply a slight downward pressure. Machine Adjustments 1) Any adjustments to the bowl require the bowl to be blocked up. The blocks should be suitable to carry the weight of the bowl. 2) Always set the parking brake and properly chock the machine to prevent movement.

8 3) When working on the apron the apron should be blocked up or chained up. Below are acceptable methods of blocking the bowl up and restraining the apron. The apron should be raised and chained tightly through the front apron view port and the lift lugs on both sides of the bowl. cool down for each hour or roading. 3) Obtain all applicable permits and observe all laws and regulations. Roading Scrapers 1) Make sure the tires are at their recommend tire pressures. 2) After exceeding one hour of roading stop 30 minutes to allow tires to cool down. Repeat the

9 Maintenance Section Torque Specifications Warning: All fasteners on the H619 are grade 8. When replacing fasteners use grade 8 or better. Humdinger Equipments parts should be used to protect your investment. Torque Ft Location Lbs Brake Caliper Bolts 320 Brake Disc Bolts 177 Tail Roller Nut 175 Router Bit Bolts 400 Cutting Edge Bolts 400 Teeth Bolts 400 Hitch Retention Plate Bolts 320 Trailing Unit Hitch Bolts 320 Lift Pin Bolts 320 Draft Frame Arm Bolts 320 Apron Arm Bolts 320 Apron Pivot Shaft Bolts 160 Axle Retention Bolts 320 Wheel Studs Nuts 320 Covers Bolts 35 Regen Valve Bolts 35 Sequence Valve Bolts 35 Axle Cover Bolt 18 Axle Seal Retainer Bolts 18 Hitch Ball Bolts 320 Ejector Roller Cap Bolts 37 Ejector Roller Retainer Bolts 59 General Torque Specifications Torque Ft Size Lbs 5/ / / / / / / / Tire Inflation Tires shipped from the factory are inflated with dry nitrogen. This is to prevent the possibility of combustion within the tire, slows the deterioration of the rubber compounds within the tire, and reduces the corrosion of rim components. Recommended cold tire inflation pressure for factory supplied tires is 76 psi for 34 ply tires and 63 psi for 28 ply tires. Consult with your tire supplier for additional information. Warning: To avoid over inflation, the proper use of nitrogen inflation equipment and training in the use of that equipment is necessary. Improper or misused equipment can cause a tire

10 blowout or rim failure. Serious personal injury or death can occur due to tire blowout or rim failure Because a fully charged nitrogen cylinder s pressure is approximately 2200 psi, a tire blowout and or rim failure can occur if the inflation equipment is not used correctly. Lubricants Use the hydraulic fluid recommended by your tractor supplier. Maintenance Schedule When Required Replace Cutting Edges and Router Bits Replace Draft Frame Wear Pads Adjust Ejector Carrier Rollers Daily Walk Around Inspection Lubricate Hitch Check adjust Ejector Guide Rollers Grease Lift Cylinder Pins Check Brake Lines Every 50 Hours or Monthly Check Hitch Ball and Retainer for wear. Remove shims as necessary. If wear is substantial replace the hitch retainer plate and/or ball. Check Brake Pads and Disc for wear and replace as necessary. The minimum disc thickness is.500 inches. Minimum lining thickness is.0625 inches. Check brake caliper bolts for proper torque. Every 2000 Hours or Yearly Inspect and repack Ejector Tail Rollers. Hydraulic Systems Oil Change. Wheel Bearing Repack. Warning! The Ejector Rollers and Rear Wheel Assemblies have grease fittings. These are to be used only at the time the bearings are re-packed. Do not grease these items daily. Check Tire Inflation Every 250 Hours or Monthly Wheel Bearing Check

11 Hookup Information 3 rd Bowl Down 3 rd Apron Up 3 rd Ejector Forward 3 rd Apron Down 3 rd Ejector Return 3 rd Bowl Up 2 nd Bowl Down 2 nd Apron Up 2 nd Ejector Forward 2 nd Bowl Up 2 nd Apron Down 2 nd Ejector Return Unused ports must be capped.

12 3rd Bowl Row 1 st Bowl Row 2 nd Bowl Row Row Functions (Left To Right) Bowl Up Apron Down/Ejector Return Apron Up/Ejector Forward Bowl Down Unused ports must be capped. If air is in the system then the hydraulics must be cycled several times to remove it from the system. Warning: Many of the circuits have trapped high pressure oil in them so before removing hoses or tubes relieve the hydraulics at the tractor and carefully bleed the hydraulics at the fittings before removing the affected hydraulic line.

13 Brakes The Humdinger H619 uses ISO 5676 Hydraulic Couplings for connecting the braked machine to the tractor. Before connecting make sure the proper couplers are in place. These couplers are specifically designed to limit fluid loss and air entry into the system. valve. Use a hose for bleeding to avoid getting fluid on the linings. 5) Repeat for the other calipers 6) All four calipers must be bled. 7) Test for proper function. Before connecting the lines make sure all couplers are clean and free of foreign material. After coupling the machines for the first time the brakes must be bled. It is not necessary to remove the tire and rim to bleed the brakes. Bleeding Procedure 1) Park the tractor and scrapers on level ground. 2) Make sure the tractor is in park and set parking brake if equipped. 3) Properly chock the scrapers and lower all cutting edges to the ground to prevent movement. 4) Open the bleed valve on one of the caliper disc and have someone in the tractor press the brake pedal. Keep valve open and the pedal pressed until the fluid is clear and free from air. While the fluid is flowing from the caliper close the Bleed Port Tire and Rim Removed for Clarity

14 WARNING DO NOT OPERATE THE BRAKE SYSTEM AT MORE THAN 2300 PSI. OVER PRESSURIZATION OF BRAKE MAY RESULT IN SEAL DAMAGE CAUSING LOSS OF BRAKING AND POSSIBLE CATASTROPHIC FAILURE. MAINTENANCE 1) Inspect brake periodically to insure that all boots are tight and that there are no leaks. Inspect for boot deterioration and excessive lining wear. 2) Lining should be replaced when the friction material is worn to 1/16 inch thickness. 3) Inspect disk used with the brake head assembly for damage and wear. Replace the disk if it has worn to.500 inch or less. 4) Brake lining hold pins should be adjusted to have a clearance of inch to inch. WARNING FAILURE TO REPLACE LINING OR DISK WHEN WORN TO LIMITS WILL RESULT IN LOSS OF BRAKING AND POSSIBLE CASTASTROPHIC FAILURE. NEW PAD BREAK IN When new or relined brakes are installed on a machine the brake linings should be burnished in accordance with the following procedure to achieve maximum braking performance: 1) Drive scraper at 5 to 20 mph with brake applied at just enough pressure to produce a noticeable drag. Heavy smoke and foul odor from the brake lining is normal during this procedure. 2) Continue cycle until disk achieves a temperature of 600 deg F to 700 deg F. A surface pyrometer applied to disk after

15 stopping will determine temperature. 3) Permit disk to cool to less than 200 deg F. 4) Repeat steps 1 and 2 until full braking performance is achieved.

16 Hitch Retention & Shimming 1) The Hitch ball (Item 2) should be connected to the hitch and shimmed if needed to give approximately.040 inch of vertical clearance. The hitch retaining ring (Item 1) should them be torqued to 320 Ft-Lbs. 2) Attach the scraper draft frame to shaft of the hitch ball and insert the cylindrical lock (Item 10), install the cap (Item 4) and bolts and torque to 320 Ft

Service & Operators Manual

Service & Operators Manual 58348 JULY 2002 Service & Operators Manual 417 PULLED SCRAPER Table of Contents Foreword 2 Safety Section General Safety Information. 3 Crushing or Cutting Prevention.. 3 Burn Prevention 3 Lines, Tubes,

More information

DISC AND ELECTRIC BRAKE MAINTENANCE

DISC AND ELECTRIC BRAKE MAINTENANCE Purpose To maintain and extend the product life of the Disc Brake and Electric Brake product lines. Safety Failure to follow the instructions provided in this manual may result in death, serious personal

More information

Contents. TS220 Features

Contents. TS220 Features TS220 Towed Scraper Scraper Bowl Capacity Heaped 18 m 3 23.5 yd 3 Width of Cut, to Router Bits 3480 mm 11 ft 5 in Rated Load 25 580 kg 56,400 lb Capacity Struck 13 m 3 17 yd 3 Depth of Cut max 262 mm 10.3

More information

A new grade of scraper MT-42LGP MT-42XL

A new grade of scraper MT-42LGP MT-42XL A new grade of scraper MT-42LGP MT-42L MOBILE TRACK SOLUTIONS track forward A New Grade of scraper MT-42L MT-42LGP contents The MT-42 scraper series represents a new grade of scrapers. These scrapers are

More information

TRAILER AXLE MAINTENANCE

TRAILER AXLE MAINTENANCE Purpose To maintain and extend the product life of the Trailer Axle product line. Safety Failure to follow the instructions provided in this manual may result in death, serious personal injury, severe

More information

2. PREPARATION 1. SAFETY 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT Monosem Inc.

2. PREPARATION 1. SAFETY 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT Monosem Inc. TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT For the initial preparation of the planter, lubricate the planter and row units. Make sure

More information

2. PREPARATION 1. SAFETY 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT

2. PREPARATION 1. SAFETY 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT For the initial preparation of the planter, lubricate the planter and row units. Make sure

More information

Department of Motor Vehicles Loudoun County Public Schools School Bus Inspection Study Guide Hand Out

Department of Motor Vehicles Loudoun County Public Schools School Bus Inspection Study Guide Hand Out Department of Motor Vehicles Loudoun County Public Schools School Bus Inspection Study Guide Hand Out During the actual tests, you will be expected to point or touch each of the parts of your vehicle.

More information

E-JECT SYSTEMS PRODUCT LINE E-JECT SYSTEMS PRODUCT LINE

E-JECT SYSTEMS PRODUCT LINE E-JECT SYSTEMS PRODUCT LINE E-JECT SYSTEMS PRODUCT LINE E-JECT SYSTEMS PRODUCT LINE DD030707 WORLD CLASS EARTHMOVING EQUIPMENT E-Ject Systems manufactures several different models of pull scrapers, disk harrows, sheepsfoot rollers,

More information

John Deere. MODEL: 510 Round Baler JD-O-OME59945

John Deere. MODEL: 510 Round Baler JD-O-OME59945 John Deere MODEL: 510 Round Baler THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF JOHN DEERE OR IT'S SUCCESSORS. JOHN DEERE AND IT'S SUCCESSORS ARE NOT RESPONSIBLE FOR THE QUALITY

More information

Owner s Manual Enclosed Cargo

Owner s Manual Enclosed Cargo Owner s Manual Enclosed Cargo 1 This manual contains safety information and instructions for your trailer. You must read this manual before loading or towing your trailer. You must follow all safety precautions

More information

tRIPr Chief Grain Cart. Operator s Manual. Operator s Manual

tRIPr Chief Grain Cart. Operator s Manual. Operator s Manual 125-000-01 125-000-01 1tRIPr 1tRIPr Operator s Manual 1210 Chief Grain Cart Operator s Manual Operator s Manual TO THE DEALER Predelivery/Delivery Checklist 1210 Grain Cart PREDELIVERY/DELIVERY CHECKLIST

More information

ASSEMBLY INSTRUCTIONS FOR WILWOOD FRONT D8-6 CALIPER, BRAKE PAD, AND FLEX LINE REPLACEMENT KIT CHEVROLET CORVETTE

ASSEMBLY INSTRUCTIONS FOR WILWOOD FRONT D8-6 CALIPER, BRAKE PAD, AND FLEX LINE REPLACEMENT KIT CHEVROLET CORVETTE ASSEMBLY INSTRUCTIONS FOR WILWOOD FRONT D8-6 CALIPER, BRAKE PAD, AND FLEX LINE REPLACEMENT KIT 965-98 CHEVROLET CORVETTE PART NUMBER GROUP 40-857 DISC BRAKES SHOULD ONLY BE INSTALLED BY SOMEONE EXPERIENCED

More information

T6 Owners Manual. Basic Function

T6 Owners Manual. Basic Function T6 Owners Manual Basic Function The T6 is a frameless aluminum end dump trailer. It is used mainly for hauling sand, gravel and dirt. The material is discharged by extending the hoist which raises the

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS BIG ROTOR / CALIPER RELOCATION REAR KIT SUM-BK1423 1999-2009 GM 1/2 Ton Trucks & SUVs Thank you for choosing SUMMIT RACING for your braking needs. Pleases take the time to read

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS BIG ROTOR / CALIPER RELOCATION FRONT KITS SUM-BK1422, BK1423, BK1424 1999-2006 GM 1/2 Ton Trucks & SUVs Thank you for choosing SUMMIT RACING for your braking needs. Pleases take

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Disc Brake Spindle Kit SUM-BKA2447 1964-72 A-BODY 1967-69 F-BODY 1968-74 X-BODY Thank you for choosing SUMMIT RACING for your braking needs. Please take the time to read and carefully

More information

LC I LIPPERT COMPONENTS DISC BRAKE SYSTEM FOR TRAILERS INSTALLATION, OPERATION & SERVICE MANUAL. Table of Contents

LC I LIPPERT COMPONENTS DISC BRAKE SYSTEM FOR TRAILERS INSTALLATION, OPERATION & SERVICE MANUAL. Table of Contents LC I LIPPERT COMPONENTS DISC BRAKE SYSTEM FOR TRAILERS INSTALLATION, OPERATION & SERVICE MANUAL Table of Contents Introduction... 2 Safety Information... 2 Installation... 3 Solenoid Reversing Valves...

More information

SECTION ZF FRONT AXLE

SECTION ZF FRONT AXLE 04-101.01/ 1 2011JA14 SECTION 04-101.01 6 3 5 1 2 9 1. Upper radius rod 2. Lower radius rod 3. Caliper 4. BRAKE Disk 5. Pneumatic connector 6. Hub 7. steering knuckle 8. Grease Fitting 9. Pneumatic connector

More information

Owner s Manual Hybrid/Crossover

Owner s Manual Hybrid/Crossover Owner s Manual Hybrid/Crossover This manual contains safety information and instructions for your trailer. You must read this manual before loading or towing your trailer. You must follow all safety precautions

More information

Wheels. Wheels and Tires ! CAUTION. Wheel Selection

Wheels. Wheels and Tires ! CAUTION. Wheel Selection Wheels Wheel Selection Wheels are a very important and critical component of your running gear system. When specifying or replacing your trailer wheels it is important that the wheels, tires, and axle

More information

2. PREPARATION 1. SAFETY 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT

2. PREPARATION 1. SAFETY 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT For the initial preparation of the planter, lubricate the planter and row units. Make sure

More information

TRUCKINGTRUTH.COM T T. Daniel B s Pre-Trip Inspection Checklist

TRUCKINGTRUTH.COM T T. Daniel B s Pre-Trip Inspection Checklist TRUCKINGTRUTH.COM T T Daniel B s Pre-Trip Inspection Checklist 1 My pre-trip begins as I approach the vehicle. I am looking for leaks, leaning one way or the other (which may indicate a low tire or bad

More information

AIR BRAKES THIS SECTION IS FOR DRIVERS WHO DRIVE VEHICLES WITH AIR BRAKES

AIR BRAKES THIS SECTION IS FOR DRIVERS WHO DRIVE VEHICLES WITH AIR BRAKES Section 5 AIR BRAKES THIS SECTION IS FOR DRIVERS WHO DRIVE VEHICLES WITH AIR BRAKES AIR BRAKES/Section 5 SECTION 5: AIR BRAKES THIS SECTION COVERS Air Brake System Parts Dual Air Brake Systems Inspecting

More information

Operator s Manual. GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK

Operator s Manual. GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK Easy-Load Operator s Manual GreenTek Ltd Rudgate Walton Leeds LS23 7AU UK Certificate of CE Conformity Date: 10 February 2003 Machine Model: Description: Easy-Load High Tipping Trailer Serial Number: I

More information

BACKHOE LOADERS CONTENTS

BACKHOE LOADERS CONTENTS BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:......................-9

More information

BRAKE SYSTEM Return To Main Table of Contents

BRAKE SYSTEM Return To Main Table of Contents BRAKE SYSTEM Return To Main Table of Contents GENERAL... 2 BRAKE PEDAL... 10 MASTER CYLINDER... 13 BRAKE BOOSTER... 16 BRAKE LINE... 18 PROPORTIONING VALVE... 19 FRONT DISC BRAKE... 20 REAR DRUM BRAKE...

More information

CLASS B PRE-TRIP VEHICLE INSPECTION

CLASS B PRE-TRIP VEHICLE INSPECTION Warren County ESC 320 E. Silver Street Lebanon, OH 45036 April 1, 2006 CLASS B PRE-TRIP VEHICLE INSPECTION A vehicle inspection test evaluates your ability to inspect important parts of a commercial vehicle.

More information

2007 Pontiac G BRAKES Disc Brakes - G6

2007 Pontiac G BRAKES Disc Brakes - G6 REAR DISC BRAKE PADS REPLACEMENT Removal Procedure CAUTION: Refer to Brake Dust Caution. 1. Inspect the fluid level in the brake master cylinder reservoir. 2. If the brake fluid level is midway between

More information

INSTALLATION INSTRUCTIONS COUPLING NUT MOUNTED CHAIN UNIT KIT. Dealer Customer Vehicle Truck # P.O. # Unit # Bracket # Chain Wheel Kit#

INSTALLATION INSTRUCTIONS COUPLING NUT MOUNTED CHAIN UNIT KIT. Dealer Customer Vehicle Truck # P.O. # Unit # Bracket # Chain Wheel Kit# INSTALLATION INSTRUCTIONS COUPLING NUT MOUNTED CHAIN UNIT KIT Dealer Customer Vehicle Truck # P.O. # Unit # -6350 Bracket # Chain Wheel Kit# 2 Parts List for Unit 995 S 1950 W Ste. B, Springville, UT 84663-800-633-0699

More information

ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH DIAMETER SOLID ROTOR PINTO / MUSTANG II

ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH DIAMETER SOLID ROTOR PINTO / MUSTANG II ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH 0.75 DIAMETER SOLID ROTOR 97-978 PINTO / MUSTANG II (FIVE LUG CONFIGURATION ONLY)* PART NUMBER GROUP 0-03-B DISC BRAKES SHOULD ONLY BE INSTALLED

More information

EZ Hauler 2500 Training & Procedure Manual

EZ Hauler 2500 Training & Procedure Manual EZ Hauler 2500 Training & Procedure Manual Load Capacity One of the most important considerations when operating this machine is the Load Capacity of the EZ Hauler 2500 s boom. The maximum weight capacity

More information

Technical Information

Technical Information Product Group: TRAILERS Model: ALL MODELS This bulletin is provided for technical reference and service related updates. If you have any questions, comments or do not wish to receive these e-mails, please

More information

Webinar Series. APTA Bus Technical Maintenance Committee Webinar Series. Disc Brake Wheels On Inspection. Presents

Webinar Series. APTA Bus Technical Maintenance Committee Webinar Series. Disc Brake Wheels On Inspection. Presents 1 Webinar Series APTA Bus Technical Maintenance Committee Webinar Series Presents Disc Brake Wheels On Inspection January 28, 2015 2 Introduction Welcome to today s webinar in which we will cover a wheels

More information

ASSEMBLY INSTRUCTIONS FOR DYNAPRO BIG BRAKE FRONT HAT KIT, WITH DIAMETER VENTED ROTOR - RACE

ASSEMBLY INSTRUCTIONS FOR DYNAPRO BIG BRAKE FRONT HAT KIT, WITH DIAMETER VENTED ROTOR - RACE www.wilwood.com ASSEMBLY INSTRUCTIONS FOR DYNAPRO BIG BRAKE FRONT HAT KIT, WITH 11.75 DIAMETER VENTED ROTOR - RACE 00 - PRESENT BMW MINI COOPER AND MINI COOPER S PART NUMBER GROUP 10-870 DISC BRAKES SHOULD

More information

Taking the CDL Pre-trip Inspection Test

Taking the CDL Pre-trip Inspection Test Taking the CDL Pre-trip Inspection Test Class A Pre-trip Inspection Test: If you are applying for a Class A CDL, you will be required to perform a pre-trip inspection in the vehicle you have brought with

More information

Heavy Industrial Earthmovers

Heavy Industrial Earthmovers Ashland Industries where STRENGTH meets FUNCTION I-175XL2 17.5 yd 3 Ejector Scraper I-180TS2 18 yd 3 Ejector Scraper CS18-HD 18 yd 3 Carry All Scraper I-200TS4 20 yd 3 4-Tire Ejector Scraper Heavy Industrial

More information

Webinar Series APTA Standards Quarterly Webinar Series

Webinar Series APTA Standards Quarterly Webinar Series 1 Webinar Series APTA Standards Quarterly Webinar Series Presented by APTA Brake and Chassis Working Group Disc Brake Wheels On Inspection January 26, 2017 2 Moderator Presenter Jerry Guaracino Assistant

More information

WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number:

WESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: WESCO INDUSTRIAL PRODUCTS, INC Folding Handle Scissors Lift Table : 260201 Note: Operator MUST read and understand these operating instructions before using this Folding Handle Scissors Lift Table. TABLE

More information

CHASSIS CONTENTS FRONT WHEEL 6-1 FRONT BRAKE 6-6 FRONT FORK 6-14 STEERING STEM 6-20 REAR WHEEL AND REAR BRAKE 6-25 SUSPENSION 6-31 REAR SWING ARM 6-36

CHASSIS CONTENTS FRONT WHEEL 6-1 FRONT BRAKE 6-6 FRONT FORK 6-14 STEERING STEM 6-20 REAR WHEEL AND REAR BRAKE 6-25 SUSPENSION 6-31 REAR SWING ARM 6-36 CHASSIS CONTENTS FRONT WHEEL 6-1 FRONT BRAKE 6-6 FRONT FORK 6-14 STEERING STEM 6-20 REAR WHEEL AND REAR BRAKE 6-25 SUSPENSION 6-31 REAR SWING ARM 6-36 6 6-1 CHASSIS FRONT WHEEL REMOVAL Support the machine

More information

Salem, OhioSalem, Ohio

Salem, OhioSalem, Ohio OWNER S MANUAL FLATBED TRAILERS Alliance, Ohio Salem, Ohio Salem, Ohio 14599 Commerce St. 1453 Allen 1453 Rd. Allen Rd. Alliance, Ohio 44601 Salem, OhioSalem, Ohio Phone: 330.823.9900 Phone: 330.829.1680

More information

REMOVAL & INSTALLATION

REMOVAL & INSTALLATION REMOVAL & INSTALLATION FRONT DISC BRAKE PADS 1. Raise and support front of vehicle. Remove wheels. Remove caliper bolt and brakeline bracket bolts. Pivot caliper aside. Remove pads and pad shim. Remove

More information

SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS

SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS XJ SUSPENSION 2-1 SUSPENSION TABLE OF CONTENTS page ALIGNMENT... 1 FRONT SUSPENSION... 7 page REAR SUSPENSION... 16 ALIGNMENT TABLE OF CONTENTS page AND WHEEL ALIGNMENT...1 DIAGNOSIS AND TESTING SUSPENSION

More information

Caution: Refer to Adding Fluid to the Brake System Caution in the Preface section.

Caution: Refer to Adding Fluid to the Brake System Caution in the Preface section. Page 1 of 6 2009 Pontiac G8 G8 Service Manual Brakes Disc Brakes Repair Instructions Document ID: 2094891 Rear Disc Brake Pads Replacement Special Tools J 23738-A Hand Vacuum Pump. Removal Procedure Warning:

More information

Hydraulic Hand Pallet Trucks

Hydraulic Hand Pallet Trucks Operating Instructions & Parts Manual 12U124 Please read and save these instructions. Read carefully before attempting to assemble, install, operate, or maintain the product described. Protect yourself

More information

SERVICE GUIDE AGRICULTURAL TRACK REMOVAL INSTALLATION INSPECTION ALIGNMENT CPB-305

SERVICE GUIDE AGRICULTURAL TRACK REMOVAL INSTALLATION INSPECTION ALIGNMENT CPB-305 SERVICE GUIDE CPB-305 AGRICULTURAL TRACK AGCO Challenger MT735, 745, 755, 765 AGCO Challenger MT835, 845, 855, 865, 875 REMOVAL INSTALLATION INSPECTION ALIGNMENT TABLE OF CONTENTS Table of Contents Introduction...

More information

MARLEY ENGINEERED PRODUCTS OPERATING INSTRUCTIONS AND PARTS LIST

MARLEY ENGINEERED PRODUCTS OPERATING INSTRUCTIONS AND PARTS LIST MARLEY ENGINEERED PRODUCTS OPERATING INSTRUCTIONS AND PARTS LIST TUBE AXIAL DUCT FANS INDUSTRIAL PROPELLER FANS INDUSTRIAL ROOF EXHAUSTERS HEAVY DUTY MAN/PRODUCT COOLERS WARNING BY ACCEPTANCE OF THIS MERCHANDISE,

More information

CAUTION. Hydraulic Brakes. Braking Systems - Hydraulic

CAUTION. Hydraulic Brakes. Braking Systems - Hydraulic Hydraulic Brakes Dexter offers several varieties of hydraulic trailer brakes. Your vehicle may be equipped with drum brakes or disc brakes. The hydraulic brakes on your trailer are much like those on your

More information

INSTALLATION INSTRUCTIONS 88511

INSTALLATION INSTRUCTIONS 88511 INSTALLATION INSTRUCTIONS 88511 For Suspension System RS6511: Ford Super Duty Requires coil spring kit RS80117 or RS80119 for a complete installation READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH

More information

Service precautions. Emission control system maintenance. Maintenance

Service precautions. Emission control system maintenance. Maintenance Maintenance Service precautions Vehicle maintenance is an important yet frequently neglected item. Proper maintenance will aid in retaining the level of performance that has been engineered into your Mitsubishi

More information

CDL Series Pre-Trip Inspection AT-TC3TS T1-JA01. Pre-Trip Inspection Checklist

CDL Series Pre-Trip Inspection AT-TC3TS T1-JA01. Pre-Trip Inspection Checklist Pre-Trip Inspection Checklist This checklist covers different parts of the vehicle you would check before a trip. Note that some specifications described in the following content may not be the same as

More information

SECTION 7 - SUSPENSION

SECTION 7 - SUSPENSION For Arctic Cat Discount Parts Call 606-678-9623 or 606-561-4983 SECTION 7 - SUSPENSION 7 TABLE OF CONTENTS Front and Rear Suspension Assembly Schematics... 7-2 Shock Absorbers... 7-2 Swing Arm... 7-5 Front

More information

Multi-Purpose Tool Sitework Systems Attachment

Multi-Purpose Tool Sitework Systems Attachment FORM NO. 22 648 Multi-Purpose Tool Sitework Systems Attachment Model No. 2242 89000 & Up Operator s Manual English (CE) Contents Page Introduction................................. 2 Safety......................................

More information

4WD FORD F150 BRONCO 4 OR 6 SERIES II RADIUS ARM SYSTEM

4WD FORD F150 BRONCO 4 OR 6 SERIES II RADIUS ARM SYSTEM BOX KIT # 63000 4WD 81-96 FORD F150 BRONCO 4 OR 6 SERIES II RADIUS ARM SYSTEM INTRODUCTION Installation requires two professional mechanics. Be sure the vehicle is in excellent working condition-repair

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS FRONT DISC BRAKE CONVERSION KITS: A132-1, A133, A133-1 A134, A134-1 1968-73 MUSTANG/FORD Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Please

More information

4745 Drill OWNER'S MANUAL (06-08) #

4745 Drill OWNER'S MANUAL (06-08) # 4745 Drill OWNER'S MANUAL (06-08) # 605865 Identification Your CrustBuster drill is identified by a Serial Number and Model Number. Record these numbers in the spaces provided in this manual and refer

More information

SECTION 4A BRAKE SYSTEM TABLE OF CONTENTS

SECTION 4A BRAKE SYSTEM TABLE OF CONTENTS SECTION 4A BRAKE SYSTEM TABLE OF CONTENTS Description and Operation... 4A-2 Braking System Testing... 4A-2 Hydraulic Brake System... 4A-2 Brake Pedal... 4A-2 Master Cylinder... 4A-2 Brake Booster... 4A-3

More information

Dura Force Disc Brake System Service Manual

Dura Force Disc Brake System Service Manual TS 20809_a 3501 Shotwell Drive ISO/TS 16949:2002 Registered (PH): 937.743.8125 Franklin, OH 45005 www.waltheremc.com (FX): 937.743.8232 Table of Contents General Description 1 3 Fastener Torque Chart 4

More information

55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left).

55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured left). SUM-BK1624A Full Size GM Installation Instructions Rear Disc Conversion 55-64 Full Size GM (Impala, Bel Air, etc.) This kit is for axles with a 3 3/8 spread center to center on the top two bolt holes (pictured

More information

KUHNS MFG LLC. Owner s Manual. Hay Accumulator. Operators Manual for the Kuhns Mfg LLC Hay Accumulators.

KUHNS MFG LLC. Owner s Manual. Hay Accumulator. Operators Manual for the Kuhns Mfg LLC Hay Accumulators. KUHNS MFG LLC Hay Accumulator 2012 Operators Manual for the Kuhns Mfg LLC Hay Accumulators. 2 TABLE OF CONTENTS 1. Initial Setup... 3 Accumulator Setup... 3 Hooking Up the Baler... 5 Baler Configuration...

More information

2017 ESCAPE ESCAPE (1) Hitch Receiver Weight Capacity

2017 ESCAPE ESCAPE (1) Hitch Receiver Weight Capacity 2017 ESCAPE 2017 Escape pre-production model shown. Available Spring 2016. Required Equipment Includes items that must be installed.* Your New Vehicle Limited Warranty (see your dealer for a copy) may

More information

Operator's Manual. VC-60 & VC-60 Plus Harper Industries, Inc. 7/03 Part No

Operator's Manual. VC-60 & VC-60 Plus Harper Industries, Inc. 7/03 Part No Operator's Manual VC-60 & VC-60 Plus 2003 Harper Industries, Inc. 7/03 Part No. 970066 Thank you for purchasing a Harper/Goossen Verti-Cutter. As with all Harper/Goossen products, the Harper/Goossen Verti-Cutter

More information

A /F/X Body Instruction Packet Rear Disc Conversion

A /F/X Body Instruction Packet Rear Disc Conversion A /F/X Body Instruction Packet Rear Disc Conversion 64-72 A Body / 67-81 F Body / 62-74 X Body This kit is for axles with a 3 1/8 spread center to center on the top two bolt holes (pictured left). Rotor

More information

MODELS 1324 & 1624 & 1824

MODELS 1324 & 1624 & 1824 THE MODELS 1324 & 1624 & 1824 HYDRAULIC TRENCHERS CONGRATULATIONS! You are now the proud owner of a BARRETO trencher. Please take a moment of your time to look over the following information. Familiarize

More information

D E N N I S GANG MOWER INSTRUCTION BOOK & SPARES MANUAL

D E N N I S GANG MOWER INSTRUCTION BOOK & SPARES MANUAL D E N N I S GANG MOWER INSTRUCTION BOOK & SPARES MANUAL Ashbourne Road, Kirk Langley, Derby DE6 4NJ Tel: 01332 824777 Fax: 01332 824525 e-mail spares@dennisuk.com e-mail sales@dennisuk.com I N D E X Page.

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS FOR FORGED SUPERLITE BIG BRAKE FRONT HUB KIT WITH 3.00 DIAMETER VENTED ROTOR 968-969 FORD MUSTANG (DISC BRAKE SPINDLE ONLY) PART NUMBER GROUP 0-950 WARNING INSTALLATION OF THIS KIT

More information

SHIELDS COMPANY PERMANENT MAGNETIC TOW SWEEPER MODEL MKS4000

SHIELDS COMPANY PERMANENT MAGNETIC TOW SWEEPER MODEL MKS4000 SHIELDS COMPANY PERMANENT MAGNETIC TOW SWEEPER MODEL MKS4000 The MKS4000 MAGNETIC TOW SWEEPER is the most effective and most durable permanent magnetic sweeper available. Its super powered magnets insure

More information

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion

Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion Mopar 8 3/4 & 9 3/4 (Dana) Installation Instructions Rear Disc Conversion This kit is for either Mopar 8 ¾ or Mopar 9 ¾ (Dana). This kit is designed to work with axles with either GM 5 x 4.75 Bolt Pattern

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC1001, RC1001X Applications: 64-72 A-body, 67 F-Body, 63-67 X-body with Non Staggered Shocks Thank you for choosing GPS Auto for your automotive

More information

VR482 Hay Rake OPERATOR & PARTS MANUAL. Last Updated: May 12, 2014

VR482 Hay Rake OPERATOR & PARTS MANUAL. Last Updated: May 12, 2014 VR482 Hay Rake OPERATOR & PARTS MANUAL Last Updated: May 12, 2014 Bridgeview Manufacturing Inc. P.O. Box 4 Gerald, SK S0A 1B0 (306) 745-2711 www.bridgeviewmanufacturing.com bmi@sasktel.net Your Authorized

More information

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT WITH.9 DIAMETER VENTED ROTOR (. OFFSET) 005 - PRESENT MUSTANG 8.8 (5 LUG) PART NUMBER GROUP 0-98 INSTALLATION OF THIS KIT SHOULD ONLY

More information

TABLE OF CONTENTS TRAILER INFORMATION... 3 COUPLING TO THE TOW VEHICLE... 4 LOADING THE TRAILER... 9 CHECKING THE TRAILER... 10

TABLE OF CONTENTS TRAILER INFORMATION... 3 COUPLING TO THE TOW VEHICLE... 4 LOADING THE TRAILER... 9 CHECKING THE TRAILER... 10 TABLE OF CONTENTS TRAILER INFORMATION... 3 COUPLING TO THE TOW VEHICLE... 4 COUPLING AND UNCOUPLING THE TRAILER FROM THE TOW VEHICLE... 4 BALL-HITCH COUPLER... 4 INSTRUCTIONS ON COUPLING TO THE TOWING

More information

MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL

MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL DO NOT THROW AWAY IMPORTANT MANUAL MODEL HD99 HYDRAULIC ONE MAN TOWABLE EARTHDRILL Operators Manual GROUND HOG, INC. P.O.BOX 290 San Bernardino, CA. 92402 Phone (909) 478-5700 Fax (909) 478-5710 E-mail:

More information

2015/2016 Industrial Catalog DO MORE.

2015/2016 Industrial Catalog DO MORE. 2015/2016 Industrial Catalog DO MORE. 2 BORN IN THE DIRT Lorem ipsum dolor sit amet, consectetur Lorem ipsum dolor sit amet, consectetur ASHLAND INDUSTRIES I-950 Lorem ipsum dolor sit amet From the very

More information

Operator s/parts Manual

Operator s/parts Manual Operator s/parts Manual 3-Point Solid Stand Drills Pull Hitch Package Manufacturing, Inc. P.O. Box 5060 Salina, Kansas 67402-5060! Read the operator s manual entirely. When you see this symbol, the subsequent

More information

Ford 8, 9 Small Bearing Installation Instructions Rear Disc Conversion

Ford 8, 9 Small Bearing Installation Instructions Rear Disc Conversion Ford 8, 9 Small Bearing Installation Instructions Rear Disc Conversion This kit is for Ford 9 rear axles with the small (2.835 ) style bearing and Ford 8 rear ends. This kit is designed to work with axles

More information

BACKHOE LOADERS CONTENTS

BACKHOE LOADERS CONTENTS BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:.....................-11

More information

1 of 11 4/11/ :35 AM

1 of 11 4/11/ :35 AM 1 of 11 4/11/2015 11:35 AM Rear Disc Brake Pads Replacement Special Tools * KM-6007 Resetting Tool * KM-6007-30 Adaptor Removal Procedure 2 of 11 4/11/2015 11:35 AM Caution: Refer to Brake Dust Caution

More information

KUHNS MFG LLC. Owner s Manual. Hay Accumulator. Operators Manual for the Kuhns Mfg LLC Hay Accumulators.

KUHNS MFG LLC. Owner s Manual. Hay Accumulator. Operators Manual for the Kuhns Mfg LLC Hay Accumulators. KUHNS MFG LLC Owner s Manual Hay Accumulator 2008 Operators Manual for the Kuhns Mfg LLC Hay Accumulators. Kuhns Mfg LLC Owner s Manual 2 TABLE OF CONTENTS 1. Initial Setup... 3 Accumulator Setup... 3

More information

Wheels. Wheels and Tires ! CAUTION. Wheel Selection

Wheels. Wheels and Tires ! CAUTION. Wheel Selection Wheel Selection Wheels Wheels are very important and critical components of your running gear system. When specifying or replacing your trailer wheels it is important that the wheels, tires, and axle are

More information

Portable Lighting Equipment Operating Instructions Table of Contents

Portable Lighting Equipment Operating Instructions Table of Contents Portable Lighting Equipment Operating Instructions Table of Generac Magnum Ingersoll Rand TEREX AMIDA TEREX GENIE Model: MLT3060 Model: LIGHTSOURCE Model: Amida AL4000 series Model: TML4000N Generac Magnum

More information

Installation Instructions

Installation Instructions Equipment Required: Wrenches: 9/16, 3/4, 1-1/8 Drill Bits: 11/32 Torque Wrench capable of reading 260 ft-lbs. Installation Instructions IN DEALERS: Please give these instructions to your customer. Do Not

More information

Installation Instructions

Installation Instructions Preparing your vehicle to install your brake system upgrade 1. Rack the vehicle. 2. If you don t have a rack, then you must take extra safety precautions. 3. Choose a firmly packed and level ground to

More information

INSTALLATION INSTRUCTIONS Air Spring Kit Ford F-250/350 Single Wheel 2WD IMPORTANT NOTES

INSTALLATION INSTRUCTIONS Air Spring Kit Ford F-250/350 Single Wheel 2WD IMPORTANT NOTES INSTALLATION INSTRUCTIONS 6107 Air Spring Kit 1999+ Ford F-250/350 Single Wheel 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR

More information

Sugarbeet Harvester. Checklist. mouse over for additional notes in this presentation

Sugarbeet Harvester. Checklist. mouse over for additional notes in this presentation Sugarbeet Harvester Checklist mouse over for additional notes in this presentation Checklist vs. Slide Rule Pre-Field Checklist Hitch & PTO Row Finder Lifter Wheels & Struts Paddle Shaft Apron Shaft &

More information

Frontal Area Considerations. Frontal Area Limitations/ Vehicle Considerations With. Hitch Receiver Weight Capacity

Frontal Area Considerations. Frontal Area Limitations/ Vehicle Considerations With. Hitch Receiver Weight Capacity 2019 LINCOLN MKC LINCOLN MKC (1) Final Drive GCWR (lbs.) Maximum Loaded Trailer Weight (lbs.) Engine Ratio FWD AWD Automatic Transmission Turbocharged 2.0L I4 3.36 7,220 3,000(2) 3.51 7,400 3,000(2) Turbocharged

More information

SUSPENSION 2-1 SUSPENSION CONTENTS

SUSPENSION 2-1 SUSPENSION CONTENTS PL SUSPENSION 2-1 SUSPENSION CONTENTS page FRONT SUSPENSION... 10 REAR SUSPENSION... 39 page WHEEL ALIGNMENT... 1 WHEEL ALIGNMENT INDEX page DESCRIPTION AND OPERATION COMPETITION PACKAGE ALIGNMENT... 2

More information

Diagnostic Procedures

Diagnostic Procedures Section 6 Diagnostic Procedures Learning Objectives: 1. Describe manual transmission, transaxle and transfer case component inspection and diagnostic procedures 2. Identify clutch component inspection

More information

TWO-STAGE HYDRAULIC PUMP. RWP55-IBT-Air

TWO-STAGE HYDRAULIC PUMP. RWP55-IBT-Air ORIGINAL INSTRUCTIONS Form No.1000458 5 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031 Internet

More information

Wilwood Brake Kit for Total Performance Spindle

Wilwood Brake Kit for Total Performance Spindle INSTRUCTIONS 835-140170 Speedway Motors, Inc. May 2011 Wilwood Brake Kit for Total Performance Spindle Note: NOTE: Disc brakes operate in a harsh environment. To prevent bolts from working loose, every

More information

610 BUSHEL MANURE SPREADER

610 BUSHEL MANURE SPREADER 610 BUSHEL MANURE SPREADER RODA MANUFACTURING 1008 LOCUST ST. HULL, IA. 51239 Art s-way Manufacturing 712-439-2366 Co., Inc. Hwy 9 West - PO Box 288 WWW.RODAMFG.COM Armstrong, IA. 50514 U.S.A 2 INTRODUCTION

More information

2018 FUSION TRAILER TOWING SELECTOR

2018 FUSION TRAILER TOWING SELECTOR 2018 FUSION TRAILER TOWING SELECTOR FUSION (1)(2) Axle Maximum Loaded Trailer Weight (lbs.) 1.5L EcoBoost I4 FWD 1,000 2.0L EcoBoost I4 FWD/AWD 2,000 2.5L I4 FWD 1,000 2.7L EcoBoost V6 AWD 1,000(3) (1)

More information

Installation Instructions

Installation Instructions Installation Instructions Rear Disc Brake Conversion Kit Item # RC2001, RC2001X Applications: Mopar 8-3/4 & 9-3/4 Rear Axles Thank you for choosing Leed Brakes for your automotive product needs. Before

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS COMP. R AND COMP. S QUICK CHANGE KITS A200, A200-1 Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking needs. Pleases take the time to read and carefully

More information

BRACKETT AIRCRAFT COMPANY

BRACKETT AIRCRAFT COMPANY BAC BRACKETT AIRCRAFT COMPANY www.brackettaircraft.com INC. BDW-0LRH HYDRAULIC WHEEL ASM. USE ON: BELL LONG RANGER 0L, 07 GTOW:,00 LBS. LENGTH: N/A COLOR: ORANGE SHIPPING: BOXES " X 0" X " @ 0 LBS. Page

More information

TRAILER OWNER S MANUAL

TRAILER OWNER S MANUAL This manual is designed to provide information for you to understand, use, maintain and service your Triton trailer. Additional help and replacement parts are available through your local dealer. TRAILER

More information

EZ LINER EXPRESS USERS MANUAL

EZ LINER EXPRESS USERS MANUAL EZ LINER EXPRESS 2013 Vehicle Service Group CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies warrants for one year from date of installation and/or purchase any components of

More information

kelderman air ride The difference in the ride is like night and day Improves the ride of the truck Automatic leveling is available

kelderman air ride The difference in the ride is like night and day Improves the ride of the truck Automatic leveling is available Air Ride Conversion System Installation Instructions 800 334-6150 www.keldermanairride.com The difference in the ride is like night and day Inside this manual: 2003 & Newer Dodge 2-bag Rear System Tools

More information

2005 Tractor Operation Exam Kansas Hazardous Occupation Training

2005 Tractor Operation Exam Kansas Hazardous Occupation Training 2005 Tractor Operation Exam Kansas Hazardous Occupation Training Student Name: Instructor: A passing score of 75% is recommended for the written exam. Date: Instructions: Place your name and today s date

More information

11 OPERATION AND VERIFICATION

11 OPERATION AND VERIFICATION 11 OPERATION AND VERIFICATION Section Page 11.1 PREPARATION FOR A FIRST TIME START... 11-3 11.2 STARTING THE ENGINE... 11-9 11.3 RUNNING THE ENGINE... 11-12 11.4 STOPPING THE ENGINE... 11-14 (Rev. 3/04)

More information