USER MANUAL MV SPA - 1 / 22 -

Transcription

1 USR MNUL SP - 1 / 22 - SP

2 Contents Before Use Safety Precautions ~ 7 To Use Parts & Functions To Connect Hoses To Use Precaution for Use SP To Clean To Clean Trouble Shootin g Checks before calling customer services ~ 16 Please read this User s Manual for correct use Referen ce Product Specifications fter-sales services Product Warranty ~ 21-2 / 22 - SP

3 Safety Precautions Safety Precautions should be carefully observed to prevent potential accidents and risks. Precautions consist of the following Warning and Caution messages. Precautions consist of the following Warning and Caution messages Warning Warning Caution Please RD these instructions carefully before use..! This symbol indicates a potential risk. To prevent such risk, please observe the instructions. ou MUST avoid an action which is marked with this symbol. Do not immerse the Product in water. If accidentally immersed in water, unplug the power plug from the main outlet and contact the nearest retailer or the Service Center. Do not use the Product if any abnormality is shown on the Product. Unplug the power plug from the main outlet and contact the nearest retailer or the Service Center Take care not to trap the power cable in doors or other objects. This may damage the power cable leading to fire or electric shock Clean the pins of the plug with a dry cloth if contaminated by water or dust. Otherwise this may cause fire or electric shock. - 3 / 22 - SP

4 Do not touch or remove the power plug with wet hands. This may cause electric shock. Do not use many plugs on one socket. If the socket is overheated, it may cause short-circuiting or electric shock. Do not place heavy objects on the power cable. This may damage the power cable leading to fire or electric shock. Do not cover the Product with during use. This may cause product breakdown. Do not connect the plug upwards on the socket. This may cause fire or electric shock. Do not staple down the power cable to affix to surfaces. This may cause electric shock. lways plug into a suitable socket (C 220V). This may cause fire or electric shock.. Do not damage the power cable by extending or altering. This may cause fire or electric shock. - 4 / 22 - SP

5 Remove the power plug from the socket when cleaning or checking. This may cause electric shock Caution Do not exert heavy impact On or drop the Product. This may cause breakdown and Safety problems. Do not damage the power cable by extending or altering. This may cause fire or electric shock. Do not place the Product on uneven surfaces Take care that the Product does not fall. This may cause breakdown. Do not mount or sit on the Product. Care must be taken with children in particular. Do not install the Product Where it becomes vulnerable to excessive water exposure or deposits. This may cause short circuiting or electric shock. - 5 / 22 - SP

6 Do not use loose power cables, plugs or sockets. This may cause fire or electric shock Do not pull on the cable to remove the plug. This may cause fire or electric shock Do not use the Product whilst leaving the nozzle head of the water inlet outside water for a long time. It may cause breakdown. Nozzle head of the water inlet IN. Nozzle head of the water inlet IN. - 6 / 22 - SP

7 Do not use household detergents to clean the Product or harsh abrasive chemicals or sponges. This may damage the Main Body. arth the power plug If plugged into a socket that has an earth connection, no extra earthing is necessary. arth Connection Do not place heavy or unsteady objects on top of the Product. This may damage the Main Body or cause a malfunctioning in the switches. When carrying, support the Product by holding the lower part of the Main Body. This may cause scratches or breakdown. lways clean the filters and parts on the Water Inlet nd Outlet after use. Do not insert the filter parts or nozzle hoses in excessively hot water. No more 50 This may reduce the amount of bubbles and breakdown.. This may cause deformation on the filter parts or nozzle hoses. This Product is for household use only. Other use may cause breakdown. Do not use any bath products (shower gel, bath gel, Bubble Spa etc) This may cause blockage on the filter, or no bubbling at al. - 7 / 22 - SP

8 Parts & Functions Control Panel P Cap Remove the P Cap when connecting the hoses. the remaining water will come out when the P Cap is removed. Detail Control Panel 20 Min. Water IN,OUT Mail BOD Power Switch To be connected to the Inlet on the Main Body To be connected to the Outlet on the Main Body Rubber Pad dapter Inlet Hose Outlet Hose - 8 / 22 - small amount of water remains inside the product for test purposes. SP

9 Inlet Hose (IN) Inlet Nozzle Head Head 헤드 Cover 커버 Filter Packing Middle Cap (Use a coin to turn the Middle Cap to tighten or loosen.) Outlet Hose (OUT) Outlet Nozzle Head Plate Plastic Screen Head Cover - 9 / 22 - SP

10 To Connect Hoses 1 Remove the P Caps on the Inlet and Outlet on the Main Body. P CP When the P Cap is removed a small amount of water retained inside the Product will come out for test purposes. 2 Hold the Hose and slide down the Sleeve. Sleeve Please check that the correct Hoses for IN and OUT are connected to the corresponding Sleeve 3 Connect the Hoses to the corresponding Inlet and Outlet on the Main Body. Inlet Push in the Hose while pulling down the Sleeve. Once connected, release the Sleeve to secure the connection. Outlet - 10 / 22 - SP

11 To Use For eneral Bubble Spa 1. Immerse the Inlet/Outlet Nozzle Heads inside the bath tub. djust the water temperature slightly lower than normal bath water. Remove all facial make-up before taking a bath. White bubbles will spout out. Foreign materials will float on the surface at uto Stop. Please remove the foreign materials by letting the water overflow. If you have a long bath, follow the steps 1 to 7 on the right hand side instead of operating the Product at first instance. 2. Touch on the Power Button (ON). 3. Take a shower. Keep a distance of at least 50cm from the Inlet Nozzle Head to the Outlet Nozzle Head. To discharge water from the tank when you turn off the Power button, or after the uto Stop, the small air pump will operate for 3 minutes. If the water is not completely emptied from the tank, bubbles will not spout out in following usage. 4. Soak your body in the bath tub. 5. The Product will automatically stop in 20 minutes. 6. Come out of the bath tub. When air intake is insufficient, bubbles may temporarily become thinner during use. xpose the Inlet Nozzle Head to the air outside of the water to idle / Rinse. SP

12 For Bubble Shower To have a brief shower using the bubbles 1. Immerge the Inlet Nozzle Head into the washing basin or bath tub and run the water. 2. Turn on the Product. 3. Bubbles will spout out from the Outlet Nozzle Head. 4. djust the quantity of water. 5. Hold the Outlet Nozzle Head to wash hair or have a bubble shower / 22 - SP

13 Precautions for Use For proper and best use of the Product, please observe the following. To disassemble the Nozzle Head for cleaning Hold the Nozzle Head and the Head Cover and bend down to open. Do not operate the Product whilst leaving the Inlet Nozzle Head outside of water. ll parts in the correct order ach part of the Inlet and Outlet Nozzle Heads must be assembled in the correct order. (see Page 9) Care of the Nozzle Head Take care not to block the Inl et and Outlet Nozzle Heads. Floating matter during bathing llow the water to overflow in order to remove floating matter. Distance between the Inlet and the Outlet Nozzle Heads Keep a distance of at least 50cm between the Inlet and Outlet Nozzle Heads / 22 - SP

14 To Clean To clean each part of the Nozzle Head 1. To Clean the Inlet Nozzle Head Use a tooth brush or a soft brush to clean the stainless steel filter. (prior to use) 2. To Clean the Outlet Nozzle Head Separate the parts of the Outlet Nozzle Head and use a tooth brush or a soft brush to clean each part. ssemble the parts in the correct order after cleaning. (see Page 9) To Clean the Main Body To avoid damage or scratching, observe the following Clean the Product with a soft wet cloth for general cleaning. Use a small amount of neutral detergent to clean. Use a wet cloth to clean off. SUS SUS 망사 Screen Warning Caution Remove the power plug from the power socket before cleaning. Do not clean the Product with harsh bathroom or household detergents, benzene, thinner, cleanser or nylon scrubber to avoid damage to the Main Body / 22 - SP

15 Problem Check Point Trouble Shooting No bubble s spouting during use Check if the Nozzle Head is out of the water during use. xpose the Inlet Nozzle Head to the air outside water to idle for about 20 seconds. Water coming ou t from the bottom of the Main Body little amount of water may come out from the bottom of the Main Body during use. This is normal as the water circulates with the air during the automatic pressure control inside the pressure tank in the Main Body / 22 - SP

16 Product Specification The Product specification and design may be subject to change without prior notice. 1 2 POWR Consumption DC 40V 90W 3 Standard Flow L/MIN 4 5 Bath Time Setting Bathtub 20 MIN RNRL HOUSHOLD BTHTUB, 200 L 6 Water Temp. 5 ~ 40 7 Dimension W390 * D200 * H290 8 Weight - 17 / 22-7Kg SP

17 Consumer Indemnity Type of Consumer Injuries Within warranty Relief Outside warranty In case of normal breakdown or malfunction under normal use (within the warranty period) If major repair is necessary within 10 days after purchase If repair on major parts is necessary within 1 month after pur chase If the replaced product requires major repair within 1 month If replacement is impossible If there is a defect If the same defect reoccurs after repair (on the 4 th defect) If defects keep occurring after 4 repairs in total (on the 5 th d efect) If the product becomes irreparable If product repair is unfeasible due to lack of parts for repair If the product returned to a retailer for repair gets lost If damage occurs during transit or installation after purchase Replacement or refund Replacement Refund Complimentary repair service Replacement or Refund Replacement Refund the depreciated value plus 10% of that value Product breakd own or malfunc tion due to con sumer s acciden tal or intentiona l act If the product is repairable If the product is irreparable due to no parts for repair in stock Chargeable repair service Replacement after deducting the value equivalent to the chargeabl e repair service breakdown due to force majeure (fire, sea water, earthquake, storm/flood) replacement of consumable parts for normal wear and tear breakdown due to faulty power supply or connector breakdown due to external factors other than the defects on the product itself breakdown due to unauthorized repair or alteration - 18 / 22 - Chargeable repair service Chargeable repair ser vice SP

18 Ministry of Strategy & Finance Consumers Rights Consumers have valuable rights to complimentary services for a period of one year from the date of purchase against Product breakdown during use. If however the breakdown is due to consumers own fault or force majeure, repair services will be charged even during the warranty period Chargeable Services fter-sales services will be provided at cost even during the warranty period if the breakdown is due to one of the following: 1. If foreign materials (such as water, drink or small object) get inside the Product 2. If the Product is dropped or subject to severe impact 3. If the Product is exposed to abrasive solvents such as thinner or benzene 4. If non-genuine parts or consumables are used 5. If incorrect electricity voltages are applied 6. If parts or components are lost or damaged by unauthorized disassembly 7. If the product is altered or repaired by an unauthorized technician 8. If the product is damaged due to force majeure (lightening, fire, storm/flood, gas, sea water, earthquake, etc) 9. If the safety warnings in the User s Manual are not observed (Product life can be extended if the safety warnings are duly observed.) 10. If the breakdown is due to users fault - 19 / 22 - SP

19 Product Name: Nano/Micro Bubbler (for home use) Model Name : Date of Purchase : Customer Card Name of Customer: Tel: ddress: Name of Retailer: Tel: ddress: 1. Please fill out all necessary data before giving to the customer. 2. This Customer Card should be retained by the Retailer for Customer Care. Warranty is 1 year Others: - 20 / 22 - SP

20 Product Name: Nano/Micro Bubbler (for home use) Model Name : Date of Purchase: Product Warranty Name of Customer: Tel: ddress: Name of Retailer: Tel: ddress: Please keep this Warranty safe as you will be asked to show this Warranty at the time of claiming your fter Sales Services. 1. The Company provides the Product warranty in accordance with the terms and conditions of the Warranty. 2. The warranty period takes effect from the date of purchase. Please ensure that the date of purchase is written in the Warranty. (If the date of purchase is not shown, the warranty period shall be deemed to be effective as of 6 months from the date of manufacture.) 3. If the Product is used for commercial use (for sales purposes or for other use), or the product is for industrial use, then the warranty period shall be shortened to 6 months. 4. This Warranty shall not be reproduced / 22 - SP

21 QUICK RFRNC 1. The water temperature for Bubble Spa should be within the range of 38~40ºC. 2. Limit the time for use to less than 10 minutes for children, the elderly or the physically impaired to allow users to familiarize with the Product. Progressively prolong the time for use. 3. lthough soaps or bath/shower gels may be used before or after the Bubble Spa, do not use with the product. If you have sensitive skin or suffer atopy, experience the effects of the product without any soap or bath/shower gels 4. Please consult with a physician before use if you suffer from heart disease, or abnormal blood pressure. 5. Refrain from using the product and rest if you feel over-fatigued during the Bubble Spa. 6. When air intake is insufficient, bubbles may become thinner during use. xpose the Inlet Nozzle Head to the air out of the water to idle for about 20~30 seconds. ou can enjoy a more effective Bubble Spa / 22 - SP