Shaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications

Size: px
Start display at page:

Download "Shaping. the future. Introducing. 3M Cubitron II Abrasive Belts NEW! 994F and 997F for high pressure applications"

Transcription

1 NEW! 3M Cubitron II Abrasive Belts Introducing 994F and 997F for high pressure applications Shaping the future Revolutionary shaped abrasive grain grinds cooler and dramatically faster. Now engineered for high pressure grinding. 3

2 3M Cubitron II Abrasive Belts Forget everything you know about grinding with abrasive belts. New 3M Cubitron II Abrasive Belts continue to raise the bar for grinding performance and productivity thanks to a breakthrough 3M technology that re-writes the rules for speed, consistency and belt life. Improved Productivity With Cubitron II belts, we ve reduced belt changeover time by over 50%. Casting House Average up to 30% faster cutting on hard-to-grind metals than the next-best competitive belt Cuts cooler diverts heat from the workpiece and belt to the swarf NEW Helps eliminate burnishing and heat stress Lasts up to 4 times as long as conventional ceramic aluminum oxide belts Available with tough, durable ZF-wt cloth backing for the most demanding high-pressure applications Shaping a new era of The secret behind the revolutionary performance of new Cubitron II belts lies in their proprietary triangular-shaped abrasive grain. These self-sharpening triangles are designed to fracture as they wear, continuously forming new, super-sharp points and edges that slice cleanly through the metal like a knife, instead of gouging or plowing. This prevents heat from building up in the workpiece reducing heat-related stress cracks and discoloration. And, because the abrasive itself stays cooler and sharper, it lasts up to four times as long as conventional ceramic grain belts! Less Operator Fatigue Because Cubitron II belts cut faster, nearly all operators report that much less pressure is required throughout the life of the belt. Aerospace Parts Manufacturer As shown by the sparks in this photo, Cubitron II abrasives divert heat to the swarf, keeping both the work piece and the belt cooler. Higher Cut Rates It took our operator 60 minutes to complete a work order using a competitor s belt. He completed the same size work order in just 45 minutes, using a Cubitron II belt. Precision Casting Company Longer Belt Life I was able to get three times the life with the 994F 36+ versus the competitive ceramic belt. Not only did this increase my productivity but it also reduced the hassle of belt changeover. Foundry Operator

3 Cuts Cooler, for Improved Part Quality We processed 24 parts with no heat stress using a single Cubitron II belt, versus a competitive belt that showed signs of heat stress on the very first part. Investment Casting Company grinding performance Conventional ceramic abrasive grain is irregular and blocky in shape. Instead of a clean, machining action, the grain tends to plow through the metal, causing heat to build up in the workpiece and the abrasive resulting in a slower cut, shorter belt life and undesirable effects, such as burnishing. The new precision-shaped grain found in 3M Cubitron II Belts combines the advanced material properties of our original Cubitron grain with the precise microreplicated structures pioneered in 3M Trizact Abrasives. As the triangular shaped grain wears, it continuously fractures to form sharp points and edges. The result is a belt that cuts faster, stays cooler and lasts up to 4 times longer than the next best competitive belt.

4 How cool is this? 3M Cubitron II Belts are engineered to run cooler, eliminating metal discoloration/oxidation and reducing the chance of heatrelated stress cracks. No contest. Cubitron II vs. Conventional Grain Competitors Competitor 1 Competitor 2 3M Cubitron II 984F 36+ Competitive Belt 1 Competitive Belt 2 Competitive Belt 3 50% More Material Removed 3M Cubitron II Belts This photo shows four identical 304 stainless steel bars after nine grinding cycles of ten seconds each. While the three bars that were ground using conventional ceramic abrasive belts show varying degrees of oxidation, the bar ground with a Cubitron II belt is free of burnishing. This photo shows three identical 304 stainless steel bars after nine grinding cycles of ten seconds per cycle using equal pressure. In that time, the Cubitron II belt removed more than 50% more metal than the so-called next-generation ceramic grain abrasive. Taking productivity to the next level 3M Cubitron II Belts not only last up to four times longer than conventional ceramic abrasive belts, but also cut faster throughout their life. This translates to more finished parts per belt per hour and more profit to your bottom line. But no belt can live up to its full potential unless your people see the benefit. That s where Cubitron II belts can really push your productivity over the top. For example, many operators report that Cubitron II belts run smoother, and cut fast with less pressure. This can mean less operator fatigue and greater comfort which in turn can lead to fewer errors, greater consistency and improved employee morale. At a time when every industry must depend on fewer employees to produce more, it s important to equip your people with the very best. And when it comes to grinding, that means Cubitron II belts. 3M Cubitron II Abrasive Belts CUT FASTER! Cut Rate (grams/cycle) M Cubitron II Belts Ceramic Grain Alumina-Zirconia Aluminum Oxide Cycles The evolution of high-performance grinding abrasives In their day, each of the three competitive abrasive technologies shown on this graph represented a major advance in grinding performance. Now, in side-by-side comparisons of cutting rates on stainless steel, Cubitron II sets a new standard in productivity. 3M Cubitron II Abrasive Belts LAST LONGER! Cumulative Cut, SS304: Typical End Point Weight of Metal Removed (grams) M Cubitron II Belts Competitor 2 Competitor 1 Typical Endpoints Time 3M surveys indicate that most operators stop using a belt when performance drops to 2/3 of its initial cut rate. As this graph shows, Cubitron II belts take twice as long to reach that end point as conventional ceramic abrasive belts. In addition, Cubitron II belts cut faster throughout their entire life. Bottom line? Not only is more work done per unit of time, but also much more total work per belt.

5 Our new lineup of 3M Cubitron II Abrasive Belts NEW 994F ZF-weight backing optimal for high pressure carbon steel, aluminum applications High Other Soft Metals Aluminum 994F Carbon Steel Stainless Steel Cobalt Chrome 997F Nickel Titanium NEW 997F ZF-weight backing superb in high pressure stainless, cobalt chrome and nickel alloy applications 984F YF-weight backing excels in medium/high pressure stainless, cobalt chrome and nickel alloy applications Application Pressure Low 984F A new way to describe a new level of performance 3M Cubitron II Abrasive Belt Selection Guide Because of the enhanced efficiency and durability of Cubitron II belts, you can use a similar or finer grade than your current belt, while enjoying significantly faster cut rates and longer belt life. And in many cases, by switching to a Cubitron II belt, you can reduce the number of steps in your sequence, without sacrificing surface finish. Conventional Product Grade Recommended Cubitron II Replacement Faster Cut, Longer Life Potential Improvements Reduced Sequence Steps

6 3M Cubitron II Abrasive Belts At 3M, product innovation is just the beginning! The 3M Customer Abrasive Methods (CAM) Center, located at 3M s St. Paul, Minnesota, headquarters, was established to help customers identify the most cost-effective combination of abrasives, equipment and techniques for their particular applications. At the CAM Center, evaluations are carried out under controlled, repeatable conditions using a wide array of production scale grinding, polishing and finishing equipment, as well as in our on-site research and testing laboratories. The services of the 3M CAM Center include applications development, process optimization, operator training and other technical support. Contact your local 3M representative for more information. 3M Cubitron II Belts are made in the U.S.A. with U.S. and globally sourced materials on our new, state-of-the-art coated abrasive maker. Product Use: All statements, technical information and recommendations contained in this document are based on tests or experience that 3M believes are reliable. However, many factors beyond 3M s control can affect the use and performance of a 3M product in a particular application, including conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user s method of application. Warranty and Limited Remedy: Unless stated otherwise in 3M s product literature, packaging inserts or product packaging for individual products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M s and seller s sole obligation will be, at 3M s option, to replace the product or refund the purchase price. Limitation Of Liability: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental, or consequential regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. 3 Abrasive Systems Division 3M Center, Building 223-6N-02 St. Paul, MN Please recycle. Printed in USA. Issued: 7/12 3M All rights reserved. 8741HB M and Cubitron are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates.

3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels

3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels 3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to grind. It s grinding reinvented. Featuring NEW cubitron ii cut & grind wheels Grinding Reinvented 3M TM Cubitron TM II bonded abrasive

More information

3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED.

3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 13020160.indd 1 2/8/13 9:46 PM GRINDING REINVENTED 3MTM CubitronTM II bonded abrasive grinding and

More information

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by: 3M Abrasive Systems Random Orbital Abrasive Disc Portfolio Sanding & Finishing Solutions! cs NsEivW e Dis Abra see inside Distributed by: The 3M Value The RIGHT Abrasives NEW Products NEW! Look for this

More information

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs 3M Collision Repair Solutions 3M Abrasives and Power Tools Cutting & Grinding for Body Techs 3M Disc Sander Ideal for general metal fabrication applications, including grinding, blending, weld leveling

More information

3M Abrasives.

3M Abrasives. 3M Abrasives. www.3m.com.au 2 3M Abrasives Cleaning Scotch-Brite Clean and Strip Discs (Depressed Centre) Scotch-Brite Clean and Strip Discs (Depressed Centre) offer you a quick and simple solution. Clean

More information

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders Redefining The Finish Line 3M Elite Series Sanders NEW Elite Series Air-Powered Sanders and NEW Electric

More information

3M Automotive Aftermarket. 3M Blue Abrasives. The upgrade you ve been waiting for.

3M Automotive Aftermarket. 3M Blue Abrasives. The upgrade you ve been waiting for. 3M Automotive Aftermarket 3M Blue Abrasives. The upgrade you ve been waiting for. 3M Stikit Blue Abrasive Disc 3M Blue Abrasives are your go-to workhorse for the entire shop. 5" 3M Hookit Blue Abrasive

More information

The right choice. 3M Abrasives for Right-Angle Systems

The right choice. 3M Abrasives for Right-Angle Systems The right choice. 3M Abrasives for Right-Angle Systems Cut, grind, finish and more... with a world-class abrasive system that helps you work smarter, finish faster! 1 Choose the right disc for the job.

More information

GM Specification Annual Test Data

GM Specification Annual Test Data GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing

More information

3M Cubitron II Metalworking Belt 984F (cont.)

3M Cubitron II Metalworking Belt 984F (cont.) 3M Cubitron II Belts 3M Cubitron II Metalworking Belt 984F Made with revolutionary 3M precision shaped abrasive grain technology YF wt. backing Average up to 30% faster cutting on hard-to-grind metals

More information

GM Specification Annual Test Data

GM Specification Annual Test Data GM Specification Annual Test Data GM Specification Annual Test Data Technical Bulletin The 3M IATD Quality Laboratory tested the following tapes to the Automotive Specification. The results of the testing

More information

Door Edge Protection Film 36 inch

Door Edge Protection Film 36 inch Door Edge Protection Film 36 inch Technical Data Sheet June, 2013 3M Part No.(s) PN 3M Part Descriptor(s) Door Edge Protection Film 36 inch Product Description 3M Door Protection Film is a super tough

More information

Strength. Superior. Expected Precision. 3M Cubitron II Conventional Wheels for Gear Grinding

Strength. Superior. Expected Precision. 3M Cubitron II Conventional Wheels for Gear Grinding for Grinding Strength Superior Expected Precision Take your manufacturing process to the next level of productivity with 3M Cubitron II Conventional Wheels for gear grinding. 3 for Grinding A new dimension

More information

The right choice. 3M Abrasives for Right-Angle Systems

The right choice. 3M Abrasives for Right-Angle Systems The right choice. 3M Abrasives for Right-Angle Systems Cut, grind, finish and more... with a world-class abrasive system that helps you work smarter, finish faster! 1 For speed, long life and ease of use,

More information

3M Metalworking Systems Power Tools, Accessories and Abrasives. Advanced. Metalworking Solutions

3M Metalworking Systems Power Tools, Accessories and Abrasives. Advanced. Metalworking Solutions 3M Metalworking Systems Power Tools, Accessories and Abrasives Advanced Metalworking Solutions Grit. Guts. Get it All. 3M Metalworking Systems With the addition of the new line of powerful, lightweight

More information

protect mask conduct reflect enhance 3M Specialty Tape Solutions

protect mask conduct reflect enhance 3M Specialty Tape Solutions 3M Specialty Tape Solutions protect enhance mask reflect conduct 1 quiet & more Meeting application challenges for appliances, aerospace, automotive, construction, MRO, electronics, commercial transport,

More information

Conductor Strength Tests on ACCR 1622TW T13 Pecos Conductor

Conductor Strength Tests on ACCR 1622TW T13 Pecos Conductor Conductor Strength Tests on ACCR 1622TW T13 Pecos Conductor 3M HCC Testing Laboratory August 5, 2011 Phu Trac Sr. Quality Engineer: Phu Trac Technical Manager: Dr. Herve Deve Lead Development Specialist:

More information

Increasing load transfer in bolted joints

Increasing load transfer in bolted joints Increasing load transfer in bolted joints with 3M Friction Shims January 2017 3M Advanced Materials Division Load transfer in bolted joints 1. Shear Joint: the applied loading is at right angles to the

More information

3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive

3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive 3 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive Technical Bulletin October, 2009 Description 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive incorporate several

More information

Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive

Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive 3 Dual Lock Reclosable Fasteners Roll Goods with Pressure Sensitive Adhesive Technical Data Sheet June 2012 General Description Applications 3M Dual Lock Reclosable Fasteners are positive-locking, blind

More information

Composite Conductor 267-T16 ACCR. Deadend Strength Tests for 267-T16 ACCR

Composite Conductor 267-T16 ACCR. Deadend Strength Tests for 267-T16 ACCR Composite Conductor 267-T16 ACCR Deadend Strength Tests for 267-T16 ACCR Principal Investigator: Dr. Colin McCullough Reviewed by: Dr. Herve Deve Date of Report: March 24, 2010 Deadend Strength Tests for

More information

Instructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter

Instructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter Instructions and Parts List TM 3M-Matic P/N 78-8069-3971-2 Infeed/Exit Conveyor Attachment, 1.2 Meter Type 19100 The Infeed/Exit Conveyor, 1.2 Meter, has been designed and tested to be used only with 3M-Matic

More information

Automotive-Ready Portfolio of 3M Double Sided Tapes. Ready to go further. The future of automotive design begins here.

Automotive-Ready Portfolio of 3M Double Sided Tapes. Ready to go further. The future of automotive design begins here. Ready to go further. The future of automotive design begins here. Unleash your design freedom Ŕ Ŕ Quickly and securely attach lightweight and hard-to-bond materials Design-ready. Production-ready. Future-ready.

More information

3M Locator Plate

3M Locator Plate 3M Locator Plate 3443-113 Instructions for the Assembly of 3M Tripolarized Wiremount Sockets 1.0 General The 3M Locator Plate 3443-113 was designed to aid in the assembly of the 3M Mini Socket Connector.50

More information

3M Boron Carbide Blasting Nozzles Performance at full blast

3M Boron Carbide Blasting Nozzles Performance at full blast 3M Boron Carbide Blasting Nozzles Performance at full blast Blasting nozzles of 3M Boron Carbide and 3M Silicon Carbide have a proven track record over decades of use, due to their extreme wear resistance,

More information

3M Locator Plate

3M Locator Plate M Locator Plate 44-94 Instructions for the assembly of M Socket Connectors,.100" x.100" and.100" x.200" 1.0 General M Manual and Pneumatic Assembly Presses and accessory assembly equipment are recommended

More information

Repair Method for 3M Resilient Floor Protection System

Repair Method for 3M Resilient Floor Protection System May 2013 Technical Bulletin Repair Method for 3M Resilient Floor Protection System Description The 3M Resilient Floor Protection system is designed to allow spot repair of areas damaged by scratching,

More information

3M-MaticTM. Tape Edge Fold Kit. Instructions and Parts List. For Use On: AccuGlide TM STD Upper and lower Taping Heads. Purpose of Attachment

3M-MaticTM. Tape Edge Fold Kit. Instructions and Parts List. For Use On: AccuGlide TM STD Upper and lower Taping Heads. Purpose of Attachment Instructions and Parts List 3M-MaticTM Tape Edge Fold Kit For Use On: AccuGlide TM STD Upper and lower Taping Heads Kit Part Number Fits 78-8095-4854-4 2 Inch Upper Head 78-8095-4855-1 2 Inch Lower Head

More information

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TS (RW)

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TS (RW) 3M Cold Shrink Skirted Termination Kit QT-III 7672-S-8-TS (RW) for Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325 kv BIL CAUTION Working around energized systems

More information

3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide

3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide 3M Cross-Connect Cabinets 4220SVC and 4220SVE Tall Skirt Installation Guide Installing Tall Skirt on SVC and SVE cabinets Instructions July 2016 78-0015-3067-0 2 July 2016 78-0015-3067-0 Contents 1. General

More information

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW)

3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW) 3M Cold Shrink Silicone Rubber Skirted Termination Kit QT-III 7672-S-8-TOW/WOT (RW) for Tape Over Wire and Wire Over Tape Shielded Cable Instructions Class 1 Termination IEC 60840 72,5 kv 69 kv Class 325

More information

Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN

Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN 3 Cold Shrink Silicone Rubber Termination QT-III 7672-S-8-JCN Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class 350 kv BIL IEC 60840 72,5 kv Kit Contents: 1 Silicone Rubber Lug Seal Insulator

More information

Cable Ties. Data Sheet

Cable Ties. Data Sheet Cable Ties Data Sheet Product Description 3M Cable Ties are molded from 6/6 Nylon and are available in a variety of sizes, styles and colors including weather resistant black for outdoor use. Agency Listings

More information

SMC/Fiberglass Repair Adhesive - 90

SMC/Fiberglass Repair Adhesive - 90 SMC/Fiberglass Repair Adhesive - 90 Technical Data Sheet June, 2014 3M Part No.(s) 3M Part Descriptor(s) 3M SMC/Fiberglass Repair Adhesive - 90 Product Description 3M SMC/Fiberglass Repair Adhesive - 90,

More information

3M TM Dyneon TM Fluoroplastics. Product Comparison Guide.

3M TM Dyneon TM Fluoroplastics. Product Comparison Guide. 3M TM Dyneon TM Fluoroplastics Product Comparison Guide. Characteristics 3M Dyneon Fluoroplastics. Nominal values, not for specification purposes 1) Melt Index is measured at the following conditions 265

More information

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN 3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8(S)-JCN For Jacketed Concentric Neutral (JCN) Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350 kv BIL IEC 60840 72,5

More information

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC 3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-Tape/LC For Tape Shield or Longitudinally Corrugated (LC) Shielded Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350

More information

VentureClad Insulation Jacketing Tapes 1577 Series

VentureClad Insulation Jacketing Tapes 1577 Series VentureClad Insulation Jacketing Tapes 1577 Series Technical Data August 2017 Product Description 3M VentureClad Insulation Jacketing System is a zero permeability, all weather, multi-layered laminate

More information

3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit

3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit 3M Cold Shrink QT-III Silicone Rubber 3/C Cabinet Mount Termination Kit With High-K Stress Relief For 3-Conductor Copper Tape Shield Cables with or without Ground Wires 7600-T-3RJS Series Instructions

More information

Dual/Triple Manifold Water Filtration Systems Instruction Manual

Dual/Triple Manifold Water Filtration Systems Instruction Manual 3M TM Water Filtration Products Dual/Triple Manifold Water Filtration Systems Instruction Manual High Flow Series Water Filtration Systems Installer: Please leave this manual with owner/operator. 3M Water

More information

Series Description. 2 Specifications. Traffic Safety and Security Division. Product Bulletin Series 4000ESV 06/2017

Series Description. 2 Specifications. Traffic Safety and Security Division. Product Bulletin Series 4000ESV 06/2017 Traffic Safety and Security Division 3M Diamond Grade TM DG 3 Reflective Sheeting Series 4000 Product Bulletin Series 4000ESV 06/2017 1 Description 3M TM Diamond Grade TM DG 3 Reflective Sheeting Series

More information

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions 3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900 µm Instructions February 2008 78-8140-1581-0 Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber

More information

Panel Bonding Adhesive

Panel Bonding Adhesive Panel Bonding Adhesive Technical Data August 2017 Product Description 3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. 3M Panel

More information

3M Three-Wall and Four-Wall Headers. Series 3XXX

3M Three-Wall and Four-Wall Headers. Series 3XXX 1 of 7 M Three-Wall and Four-Wall Headers Series XXX Product 78-10-0008-0 Released: 0-0-11 of 7 Table of Contents Section Page 1. Scope........ M Customer Documents....... Performance and Test Descriptions...

More information

Electronic Materials Brochure

Electronic Materials Brochure Electronic Materials Brochure TABLE OF CONTENTS 3 Introduction to Materials 4 ISODAMP C-8000 Materials 6 ISOLOSS SL Molding Materials - Thermosets 8 CONFOR EG Foams CONFOR SC Foams ISODAMP C-8000 MATERIALS

More information

3M Cold Shrink QT-III Silicone Rubber Termination

3M Cold Shrink QT-III Silicone Rubber Termination 3M Cold Shrink QT-III Silicone Rubber Termination For Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Cable 7673-S-8(S)-TOW/WOT Instructions IEEE Std. No. 48 Class 1 Termination 69 kv Class, 350

More information

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT

3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT 3M Cold Shrink QT-III Silicone Rubber Termination 7673-S-8-TOW/WOT For Tape-Over-Wire (TOW) or Wire-Over-Tape (WOT) Shielded Cable Instructions IEEE Std. No. 48-1996 Class 1 Termination 69 kv Class, 350

More information

3M Flap Disc Selection Guide Select Flap Discs for extended life and single-step grinding/blending on all types of metals.

3M Flap Disc Selection Guide Select Flap Discs for extended life and single-step grinding/blending on all types of metals. offer an unbeatable system for grinding and blending in one easy step. The construction wears away, exposing fresh mineral to extend disc life and provide consistent cut rates. Great for weld grinding,

More information

3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm

3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm 3M No Polish LC Connector SM and MM, Flat Splice, 250/900 µm Instructions January 2009 78-8140-3696-4-A 3 Contents 1.0 Kit Contents... 3 2.0 3M No Polish LC Connector SM & MM 250/900 µm... 4 Safety Precautions

More information

Technical Data 3M Petroleum Sorbents

Technical Data 3M Petroleum Sorbents Technical Data 3M Petroleum Sorbents Use For control of spills of hydrocarbons on water or land. 3M Petroleum Sorbents repel water and will float (as long as surfactants are not also present). Product

More information

Data Sheet July For RoHS information, please visit

Data Sheet July For RoHS information, please visit Data Sheet July 2017 3M Cable Ties are molded from 6/6 nylon and are available in a variety of sizes and styles, including weather resistant black for outdoor use. Agency Approvals & Self Certifications

More information

3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS

3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS 3M No Polish LC/APC Connector SM, Angle Splice, 250/900 µm 8830-APC/AS Instructions January 2009 78-8140-3691-5-A Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber

More information

3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits

3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits 3M Cold Shrink QT-III Silicone Rubber Three-Core Termination Kits With High-K Stress Relief For 3-Conductor Type G (Ground Wire), Copper Tape Shield, Armored Cables 7600-S-3G Series Instructions IEEE Std.

More information

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm. Instructions. October C

3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm. Instructions. October C 3M No Polish Connector 8800-APC/AS SM SC/APC, Angle Splice, 250/900-µm Instructions October 2010 78-8140-1581-0-C Contents 1.0 Summary...3 2.0 Connector Preparation...4 3.0 Fiber Preparation...4 4.0 Fiber

More information

3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms

3M Products for Electrical Networks Wind Farm Capabilities. Leading Edge. Electrical Solutions for. Wind Farms 3M Products for Electrical Networks Wind Farm Capabilities Leading Edge Electrical Solutions for Wind Farms 3M technologies for wind farms Wind farm projects are difficult enough without the risk of construction

More information

3M Cable Ties Product Guide. Made in USA. & Plenum Rated

3M Cable Ties Product Guide. Made in USA. & Plenum Rated 3M Cable Ties Product Guide Made in USA & Plenum Rated A new line of general use cable ties from 3M Made in USA These ties are made of high quality 6/6 nylon in the USA, which offers excellent availability

More information

Buffer 8125 Owner s Manual

Buffer 8125 Owner s Manual 3M Buffer 8125 Owner s Manual A table of contents: A. SAFETY INFORMATION 1 B. OPERATING INSTRUCTION 4 C. SPARE PARTS INFORMATION (exploded view) 5 D. DISASSEMBLY METHOD 7 E. ASSEMBLY METHOD 10 F. GUIDELINE

More information

37SCENE 46SCENE 79SCENE

37SCENE 46SCENE 79SCENE Installation and Operation Instructions LED SCENE LIGHT LED SCENE LIGHT 37SCENE 46SCENE 79SCENE 37SCENE 46SCENE Introduction The 37SCENE, 46SCENE, 79SCENE LED Scene Lights are designed for the emergency

More information

3M Mechanical Shearbolt Connectors, QCI Series

3M Mechanical Shearbolt Connectors, QCI Series M Mechanical Shearbolt Connectors, QCI Series Data Sheet November 2011 Description Connector Contents M Mechanical Shearbolt Connectors, QCI Series are designed to cover a wide range of conductor sizes

More information

Dual Flow Manifold Systems Instruction Manual

Dual Flow Manifold Systems Instruction Manual 3M TM Water Filtration Products Dual Flow Manifold Systems Instruction Manual For DF1XX and DF2XX High Flow Series manifolds and water filtration systems Installer: Please leave this manual with owner/operator.

More information

Intended Use: Explanation of Signal Word Consequences

Intended Use: Explanation of Signal Word Consequences SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future

More information

Installing the Boom Mount ET 350 Monitor (Model ET 350R)

Installing the Boom Mount ET 350 Monitor (Model ET 350R) Installing the Boom Mount ET 350 Monitor (Model ET 350R) Intended Use When properly installed using the materials provided, and according to these instructions, the boom mount is intended to mount the

More information

3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN USA or or Made in USA

3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN USA  or or Made in USA 3M AEROSPACE & COMMERCIAL TRANSPORTATION DIVISION St. Paul, MN 55144-1000 USA www.3m.com/aerospace or 1-800-364-3577 or 1-800-235-2376 Made in USA with US and Globally Sourced Materials 3M 2015. All rights

More information

3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity.

3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity. 3M PPS Series 2.0 Spray Cup System The next evolution of painting productivity. Better. To help make you better. As a painter, you take great pride in your work. You know that the ultimate quality of the

More information

3M Ladder Kit 3M710/MS 2 -TMK-LK

3M Ladder Kit 3M710/MS 2 -TMK-LK 3M Ladder Kit 3M710/MS 2 -TMK-LK Instructions 1.0 Summary The 3M Ladder Kit 3M710/MS2-TMK-LK is intended for mounting a communication line splicing system to a fiberglass extension ladder. 2.0 Kit Contents

More information

Installation and Operation Instructions Safety Director Arrow

Installation and Operation Instructions Safety Director Arrow Installation and Operation Instructions Safety Director Arrow! WARNING! Failure to install or use this product according to manufacturers recommendations may result in property damage, serious bodily/personal

More information

SLiC Aerial Closures

SLiC Aerial Closures 3 SLiC Aerial Closures 1 The 3M SLiC Closure is a singlepiece aerial closure easily installed in construction or maintenance situations. The one piece construction permits complete splice access after

More information

3M Automotive Aftermarket Division Masking Solutions Products Catalog/Edition 1. Critical Edge. Masking. Solutions.

3M Automotive Aftermarket Division Masking Solutions Products Catalog/Edition 1. Critical Edge. Masking. Solutions. 3M Automotive Aftermarket Division Masking Solutions Products Catalog/Edition 1 Critical Edge Masking Solutions Product Catalog Masking Applying paper and tape to a vehicle to protect it from overspray

More information

710 Splicing Rig. Instructions. January E

710 Splicing Rig. Instructions. January E 710 Splicing Rig Instructions January 2007 Table of Contents 1.0 General Statement...4 2.0 3M 710-UTK25A Splicing Rig and Field Maintenance Kit...4 3.0 Straight Splicing using the 3M 710 25-pair modules...6

More information

3M Closure System 2-Type Cover (505)

3M Closure System 2-Type Cover (505) 3M Closure System 2-Type Cover (505) Installation Instructions May 2009 78-8140-1009-2-B Contents 1.0 3M Closure Kit 2-Type Contents...3 2.0 Cover Installation...4 3.0 Closure Re-entry...6 4.0 Accessories...9

More information

ABRASIVE GRAIN PERFORMANCE PROFESSIONAL SERIES SIZE GRIT DENSITY SERIES STOCK STATUS MAX RPM BOX QTY CARTON QTY T27 PART# T29 PART# MSRP

ABRASIVE GRAIN PERFORMANCE PROFESSIONAL SERIES SIZE GRIT DENSITY SERIES STOCK STATUS MAX RPM BOX QTY CARTON QTY T27 PART# T29 PART# MSRP FLAP DISCS - ALUMINA W/ GRINDING AID & POLYCOTTON BACKING Our zirconia flap discs are phenolic resin bonded to a reinforced fiberglass backing that wears with the abrasive flaps. Multiple layers of poly-cotton

More information

3M Housings CH Series

3M Housings CH Series Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 3M s The CH housings are constructed from 316 L or 304 stainless steel and manufactured in accordance to design and

More information

3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series

3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series 3M Cold Shrink Silicone Rubber Outdoor Termination Kit QT-III 7600-S-3W Series For 3-Conductor Copper Tape Shield Cables without Ground Wires Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working

More information

3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination

3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination 3M Cold Shrink Silicone Rubber Termination QT-III 7600-S-3G Series Three-Core Outdoor Termination Instructions IEEE Std. No. 48 Class 1 Termination CAUTION Working around energized electrical systems may

More information

3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary

3M Electrical Tapes Product Selection Guide. Insulate & Protect. with Quality Tapes. Preliminary 3M Electrical Tapes Product Selection Guide Insulate & Protect with Quality Tapes Get your hands on 3M Tape! 3M now offers new and experienced electricians a chance to sharpen their skills with the complete

More information

SAFETY INFORMATION & INSTRUCTION MANUAL

SAFETY INFORMATION & INSTRUCTION MANUAL SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future

More information

Volition. VF-45 Quick Install kit. and Maintenance Cleaning Kit. 3Innovation

Volition. VF-45 Quick Install kit. and Maintenance Cleaning Kit. 3Innovation Volition VF-45 Quick Install Kit and Maintenance Cleaning Kit O b D s oc ol e um te en t COOL HAND TOOLS. VF-45 Quick Install kit Get your hands on a VF-45 Quick Install Kit from 3M and you will have everything

More information

SUNTURA SOLAR TRACKER

SUNTURA SOLAR TRACKER WindyNation SUNTURA SOLAR TRACKER SOT-TRKS-NF User s Manual Page 1 of 10 WindyNation 08/09/2012 Table of Contents 1 Introduction... 3 1.1 Limited Warranty... 3 1.2 Restrictions... 3 1.3 Warranty Claims

More information

3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series

3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series 3M Cold Shrink 1/C Transition Splice Kit QS-III, 5510A-1T-PILC Series Data Sheet March 2011 Description 3M Cold Shrink 1/C Transition Splice Kits QS-III, 5510A-1T-PILC Series (which includes 5513A-1T-PILC,

More information

MaxLite StaxMax LED Flood Lights

MaxLite StaxMax LED Flood Lights Operating Instructions MaxLite StaxMax LED Flood Lights Input Rating 120V-277V 50/60Hz (347/480v optional) Wet Location Rated IP65 Operating temperature -22⁰F to 105⁰F General Safety Information 1. READ

More information

Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables)

Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Motor Lead Pigtail or V-Stub Splice 5380 Series For 5/8 kv Non-Shielded and Shielded Feeder Cables (Tape, Wire or UniShield Cables) Instructions Kit Contents 3 Lug Covers 3 Cold Shrink Terminations 12

More information

Professional Technician Warranties

Professional Technician Warranties Professional Technician Warranties BOSCH IRIDIUM/DOUBLE PLATINUM/PLATINUM SPARK PLUG LIMITED WARRANTY TO LICENSED AUTOMOTIVE REPAIR SHOPS Robert Bosch LLC ( Bosch ) warrants to all licensed automotive

More information

SUNTURA HD SOLAR TRACKER

SUNTURA HD SOLAR TRACKER WindyNation SUNTURA HD SOLAR TRACKER SOT-TRKS-NFHD User s Manual Page 1 of 11 WindyNation 08/09/2012 Table of Contents 1! Introduction... 3! 1.1! Limited Warranty... 3! 1.2! Restrictions... 3! 1.3! Warranty

More information

DEPRESSED CENTER WHEELS

DEPRESSED CENTER WHEELS Norton Company s depressed center wheels are the industry s most advanced line of performance and value products for weld and flame cut grinding, pipe notching and steel and non-steel metal fabrication

More information

Data Sheet 11.1 Issue A

Data Sheet 11.1 Issue A TECHNICAL DATA : MODEL A & B Data Sheet 11.1 Page 1 of 6 MAXIMUM WORKING PRESSURE MINIMUM EFFECTIVE WORKING PRESSURE END CONNECTION MATERIAL 12.3 Kg./Sq.Cm. (175 psi) 7 Kg./Sq.Cm. (100 psi) maximum 1.4

More information

Dual Port Manifold Water Filtration Systems Instruction Manual

Dual Port Manifold Water Filtration Systems Instruction Manual M TM Water Filtration Products Dual Port Manifold Water Filtration Systems Instruction Manual For DP1XX, DP2XX and DPXX High Flow Series Water Filtration Systems Installer: Please leave this manual with

More information

3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project

3M Electrical Markets Division. Rubber, Mastic and Specialty Tapes Application Guide. Choose the. Right Tape. for your. Electrical Project 3M Electrical Markets Division Rubber, Mastic and Specialty Tapes Application Guide Choose the Right Tape for your Electrical Project 2 Table of Contents Insulating and Splicing...4 Scotch Linerless Rubber

More information

3M Cold Shrink Splice Kit QS-III 5536A

3M Cold Shrink Splice Kit QS-III 5536A 3M Cold Shrink Splice Kit QS-III 5536A for UniShield, Wire Shielded, Longitudinally Corrugated (LC), and Tape Shielded (Ribbon Shielded) Cable or Transitions to Concentric Neutral (CN)/Jacketed Concentric

More information

FREQUENTLY ASKED QUESTION SERIES. BANJO BOLTS WHY THE BAD RAP? 6.0L Powerstroke Diesel. Last Updated: 7/2/2018 Page 1 of 3 S Diesel, LLC

FREQUENTLY ASKED QUESTION SERIES. BANJO BOLTS WHY THE BAD RAP? 6.0L Powerstroke Diesel. Last Updated: 7/2/2018 Page 1 of 3 S Diesel, LLC FREQUENTLY ASKED QUESTION SERIES BANJO BOLTS WHY THE BAD RAP? 6.0L Powerstroke Diesel Last Updated: 7/2/2018 Page 1 of 3 S Diesel, LLC Ihave been getting a bunch more comments and questions from customers

More information

Branch Splice QS-2001B

Branch Splice QS-2001B Branch Splice QS-2001B Data Sheet 1. Product Description The 3M Branch Splice QS-2001B molded rubber splice kits are designed to connect extruded dielectric power cables rated 15 kv. The basic kits handle

More information

Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current

Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current Slimline Duals Installation Instructions Harley-Davidson Touring Models 2009-Current Thank you for buying a Rinehart Racing exhaust system. We are committed to providing premium products that with proper

More information

CATEGORY DEFINITION APPLICATIONS: SIZE RANGE: GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina, Zirconia Alumina, Aluminum Oxide,

CATEGORY DEFINITION APPLICATIONS: SIZE RANGE: GRIT RANGE: ABRASIVE GRAIN: Ceramic Alumina, Zirconia Alumina, Aluminum Oxide, CATEGORY DEFINITION Flap discs are versatile grinding and finishing tools, consisting of three main components: a backing plate, adhesive, and abrasive cloth flaps. The rectangular flaps are overlapped

More information

Toro Sprayer Calibration Tool

Toro Sprayer Calibration Tool Commercial Products Toro Sprayer Calibration Tool User Guide & Installation Instructions Toro Sprayer Calibration Tool 1 Table of Contents Introduction... 2 Program Instructions... 4 Toro Software End

More information

Cold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief)

Cold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief) Cold Shrink Silicone Rubber Termination QT-III (With High-K Stress Relief) Instruction Sheet IEEE Std. No. 48 1990 Class 1 Termination 5/8.7 kv Class 95 kv BIL Kit Contents: 3 Hi K, Tracking Resistant,

More information

Transmission Guardian

Transmission Guardian Transmission Guardian Thank you for purchasing the Transmission Guardian from Bowler Performance Transmissions. We hope you are 100 percent satisfied with your purchase and if for any reason you are not,

More information

Model NTX7 Series Automatic Battery Charger User s Manual Rev. 1.0 October 17, 2006

Model NTX7 Series Automatic Battery Charger User s Manual Rev. 1.0 October 17, 2006 B R A N D Model NTX7 Series Automatic Battery Charger User s Manual Rev. 1.0 October 17, 2006 For Sales, Support and Service phone: 407-331-4793 fax: 407-331-4708 website: www.xenotronix.com email: information@xenotronix.com

More information

3M Connector System 0.050" x 0.100" Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810

3M Connector System 0.050 x 0.100 Pitch. 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 1 of 9 3M Connector System 0.050" x 0.100" Pitch 3M Tripolarized Wiremount Socket - Series 820 3M 4-Wall, Tripolarized Header - Series 810 Product Specification 78-5110-0074-0 Released: 10-1-10 2 of 9

More information

Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions

Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Cold Shrink - Silicone Rubber QTII(X)4S-32H Series Cable Termination Instructions Class I Indoor Termination Voltage Designation: 12/20(24) kv Kit Contents: 1 HeatShrinkBreakoutBootAssembly 3 HeatShrinkBindingSleeves

More information

Goodbye dust. Hello profits.

Goodbye dust. Hello profits. Goodbye dust. Hello profits. powered by Introducing the Total Automotive Sanding System Engineered to support the ongoing need for cleaner, safer, more efficient and profitable shops. Best-in-class 3M

More information

Full Flow Drinking Water System Model: 3MFF100

Full Flow Drinking Water System Model: 3MFF100 Installation and Operating Instructions For Full Flow Drinking Water System Model: 3MFF100 System tested and Certified by NSF International against NSF/ANSI Standard 42 and 53 for the reduction of the

More information